New CodeGroup for g New Flash Method Without Using Telnet

8/3/2019 New CodeGroup for g New Flash Method Without Using Telnet

1/15

Page 1 of 5 1 2 3 4 5 >

Show 40 post(s) from this thread on one page

MotorolaFans.com Forums (http://www.motorolafans.com/forums/index.php )

E680i General Chat (http://www.motorolafans.com/forums/forumdisplay.php?f=23 )

- New CodeGroup forE680/ i/ g, new flash method w ithout using telnet tolash cg35 (http://www.motorolafans.com/forums/showthread.php?t=18296 )

e398bk 03-25-2008 06:39 PM

New CodeGroup forE680/ i/ g, new flash method without using telnet to flashcg35

I/ What's new? Note: FOR E680/ I/ G, flash w ith FIRMWARE 009

After flash, only run autoCG35_autoConfig_NBT_1.3.mft it'll done all for youAutomatic FLASH CG35 and CONFIG ALL! w ithout TELNET

1. Remove un use app(email)

2. Free mem 88%, only use 12% 3. Radio from 50MHz->120MHz4. 10 lists FM

5. Remove chinese game, profile internet china6. Theme SKY and default theme7. Hot ringtone8. OptimizeJava SPEED9. LINLOADER INCLUDED10. Remove plug charge, plug usbcable sound11. FULL SUPPORT Unicode
http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/


2/15

II/ Flash1.Download CG 33, 36, 35 from:http:/ / e398bk.4shared.com/

include:for both E680 and E680i:CG36_E680i_NBT_1.1.smg CG35_E680i_NBT_1.1.smg autoCG35_autoConfig_NBT_1.3.mtf
http://e398bk.4shared.com/http://e398bk.4shared.com/


3/15

For E680i: CG33_E680i_NBT_1.1.smg

For E680: CG33_patchE680_NBT_1.0.smg

Copy to the root dir of Memorycard 2 files:CG35_E680i_NBT_1.1.smg and autoCG35_autoConfig_NBT_1.3.mtf

NOTE: do not rename CG35_E680i_NBT_1.1.smg

2.Rename CG33 and CG36 then flash w ith firmw are C5AE...0093. After flash, unplug cable, remove Battery and plug the battery.- Start your phone- Goto memory card and tap autoCG35_autoConfig_NBT_1.3.mtf, wait untilOperation successfull appear- Reboot the phone

Some message display:

Quote:

MFunVN: Configuring system, please wait ...

wait 2 minutes:

Quote:

MFunVN:This phone was empowered by [email protected]'s CG33,

CG35 and CG36.

Quote:

MFunVN: Please RESTART your phone! ENJOY SPEED! [email protected]

After all message, Reboot the phone.Go to setup, choose Master RESET!, pass is 000000

NOTE: If you are using E680 (withou i), you must tap theautoCG35_autoConfig_NBT_1.3.mtf again and reboot your phone.

4. Change to new preinstalled theme, enjoy new SPEED!
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]


4/15

neocyke 03-26-2008 12:03 AM

Thanks mate. Will try if I feel like flashing again.What else is included the CGs?

Just flashed yesterday to AEP-008 with Threesearch CG33,32 & Sandman's CG35,36.After Master clear and Master Reset, used memory 8%. Now,after installing several

stuff, used 14%.

andrei_syah 03-26-2008 12:44 AM

wow...amazing, & superb.longtime no new CG @ here.i must try your stuff first.

ciklee66 03-26-2008 04:14 AM

My phone is E680i and not flashed. Can I just copy the 2 files to the SD Card and tapautoCG35_autoConfig_NBT_1.3.mtf?

luuduchoa 03-26-2008 06:45 AM

good job!the speed's amazing **.very thank u ^^

neocyke 03-26-2008 11:44 AM

Tempted to try but lazy to flash again... With g no less.I already like my i -sigh-

Quote:

Originally Posted by ciklee66 (Post 135611)My phone is E680i and not flashed. Can I just copy the 2 files to the SD Cardand tap autoCG35_autoConfig_NBT_1.3.mtf?

CGs are supposed to work with the E60G AEP firmware la bro. So you still have toflash...

@luuduchoa:which f/w and CGs were you using before? How different is it?


5/15

e398bk 03-26-2008 12:58 PM

I removed unused libraries, recommended that flash again with those CGs.CG35 include Vietnamese keyboard and linloader, if you do not need, don't flash CG35.

naset 03-26-2008 01:24 PM

good job. :) keep on modding bro. :)

jendral_hxr 03-29-2008 04:29 AM

SxU

the performance sounds promising.. (88 --> 12) awsum!!

anton11 04-08-2008 12:06 PM

where can i find FIRMWARE 009 with cg 33 and cg 36?

All times are GMT. The time now is 06:36 AM. Page 1 of 5 1 2 3 4 5 >


Powered by vBulletin Version 3.6.8Copyright 2000 - 2008, Jelsoft Enterprises Ltd.

Ad Management by RedTyger
http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://redtyger.co.uk/http://redtyger.co.uk/http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40


6/15

Page 2 of 5 < 1 2 3 4 5 >





jendral_hxr 04-09-2008 08:06 AM

SxU

@anton11009 fw:

http://e680.e398mod.com/E680G_G_0D.C...SR009_full.zip

u can use e398bk's cgs, sandman's, earkin's, sulian's, ITMASTER's (just google it)

mehditop 04-19-2008 03:28 PM

i need your help please.i flash my e680i with the bootloader methode :

1. Extract the original firmware (e.g. E680I_G_0D.C5....._full.shx) to a directory(name should not contain spaces) (e.g. C:\FW).2. Extract the modified CG (e.g. E680I_G_0D.C5......_fullCG35.smg) to anotherdirectory (eg C:\CG). Do not rename the CG file.3. Start MultiFlashFlex.exe from the directory where PST is installed (eg C:\ProgramFiles\Motorola\PST\).4. Add the firmware to be flashed(e.g. C:\FW\E680I_G_0D.C5......_full.shx).5. Start flashing.6. When you see "Erasing phone memory" copy the modified CG to the firmware folder(C:\CG\E680I_G_0D.C5......_fullCG35.smg --> C:\FW).

7. You will be prompted "Do you want to replace the file". Click "YES".8. Let the flashing process continue.

how to include this CG's (33,35,36) .thank's
http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://e680.e398mod.com/E680G_G_0D.C5.AEP_0D.C0.B1P_T677SR_L001_S006_P012_GSOE680GT677SR009_full.ziphttp://e680.e398mod.com/E680G_G_0D.C5.AEP_0D.C0.B1P_T677SR_L001_S006_P012_GSOE680GT677SR009_full.ziphttp://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/


7/15

jendral_hxr 04-19-2008 11:07 PM

SxU

Quote:

Originally Posted by mehditop (Post 138064)i need your help please.i flash my e680i with the bootloader methode :

1. Extract the original firmware (e.g. E680I_G_0D.C5....._full.shx) to adirectory (name should not contain spaces) (e.g. C:FW).2. Extract the modified CG (e.g. E680I_G_0D.C5......_fullCG35.smg) toanother directory (eg C:CG). Do not rename the CG file.3. Start MultiFlashFlex.exe from the directory where PST is installed (eg C:Program FilesMotorolaPST).4. Add the firmware to be flashed(e.g. C:FWE680I_G_0D.C5......_full.shx).

5. Start flashing.6. When you see "Erasing phone memory" copy the modified CG to thefirmware folder(C:CGE680I_G_0D.C5......_fullCG35.smg --> C:FW).7. You will be prompted "Do you want to replace the file". Click "YES".8. Let the flashing process continue.

how to include this CG's (33,35,36) .thank's

step 6 and 7basically.. replace the original e680i_cg33/35/36 with another one while you're in"erasing flash memory" (the longest phase)

read more stickies (inijohan's tutorial is avaiable in Indonesian-just google it) :D

naset 04-20-2008 07:17 AM

U CANNOT replace cg35 while flashing.ur phone will stuck at bootscreen.u only canreplace cg35 by using qonsole or telnet.

mehditop 04-20-2008 09:41 PM

yes it will hang at bootscreen.how can'i replace it by using telnet?oh naset now i have an e680g i reflashed my e680i, but the problem is about mpkg. ilike the popup installation like as ABP firm how can i do it .thank's a lot and sorry for

disturbing


8/15

naset 04-21-2008 02:45 AM

looks like u didnt replace cg36 while u flashing.in cg36,already contain default mpkginstaller like ABP.

kanahaus 04-21-2008 07:19 AM

hooo.sao l wa ti bn ny lun vy bro...heheheCF khng???hehe

mehditop 04-21-2008 04:01 PM

1 Attachment(s)

thank's naset i will try.kanahaus what is this language ohhhh it's so hard :)naset this is the cg's i'm using

E680G_G_0D.C5.AEP_0D.C0.B1P_T677SR_L001_S006_P012_GSOE680GT677SR009_fullCG33.smgE680G_G_0D.C5.AEP_0D.C0.B1P_T677SR_L001_S006_P012_GSOE680GT677SR009_fullCG36.smg(see the picture)but i have no popup installation,i can't install mpkg for a momenti need your help naset :)

naset 04-22-2008 04:55 PM

when u copy cg33 and cg36 while it show "erasing flash memory",did the file replacewhen u paste?i mean,does it show "replace files?" when u paste the cg33 and cg36?

mehditop 04-22-2008 06:57 PM

yes it shows "would you like to replace" i clik yes.but this is the cg's concerned?

All times are GMT. The time now is 06:37 AM. Page 2 of 5 < 1 2 3 4 5 >


Powered by vBulletin Version 3.6.8

Copyright 2000 - 2008, Jelsoft Enterprises Ltd.Ad Management by RedTyger
http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://redtyger.co.uk/http://redtyger.co.uk/http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10


9/15

Page 3 of 5 < 1 2 3 4 5 >





naset 04-23-2008 02:59 AM

1 Attachment(s)

yes,this is all about cg.did u replace while 10sec b4 the memory being erased or not?or maybe u should get another modded cg.

Here you go.my modded cg36 for AEP 009 fw.based on sandman's mod:)-mpkg-usbnet-fm radio 30 stations-real player up to 500 list items-message delivery report-optimized java speed-java gmail app compatible

mehditop 04-26-2008 12:25 AM

thank's,thank's and 1000 thank's naset

mehditop 04-26-2008 02:29 AM

i reflashed with your CG36 and i have now my mpkg popup instalation.thank's

naset:):):):):):):), but i have no vibration, what do i do ?

naset 04-26-2008 03:14 AM

1 Attachment(s)

if u use sandman's AEP modded cg,it's come with config-cg33.mtf.just tap the mtf fileand wait until its successfull installed.i attach here the file.unzip it,copy to sd/mmc andtap the file.
http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/


10/15

jendral_hxr 04-26-2008 10:35 AM

SxU

Quote:

Originally Posted by naset (Post 138118)U CANNOT replace cg35 while flashing.ur phone will stuck at bootscreen.uonly can replace cg35 by using qonsole or telnet.

i did it on my own.. and i think replacing cg35 is ok~i encountered no problem

mehditop 04-26-2008 04:19 PM

did you replace it by telnet or what? i believe that does not function with thebootloader methodenaset, some apps does not function like (xmplayer3.0 - theme manager - blending -xp tool and other), when i tap on the installed app that does not give anything (thisapps function in ABP firm).im so sorry naset for disturbing

mehditop 04-26-2008 04:32 PM

Quote:

Originally Posted by naset (Post 138833)if u use sandman's AEP modded cg,it's come with config-cg33.mtf.just tap themtf file and wait until its successfull installed.i attach here the file.unzip it,copy to sd/mmc and tap the file.

thank's naset but the operation was succesfull and no vibration

naset 04-27-2008 02:55 AM

hmm...try restart your phone.


11/15

mehditop 04-27-2008 01:41 PM

yes,but no vibration

naset 04-28-2008 03:06 AM

That's weird..ok,i upload my modded cg33 and cg35(based on sandman's mod).Try givit a shot.mybe it works bcoz i have no prob at all with this cg. :)

Here is the link for cg33 and cg35 -AEP 009 fw

http://www.mediafire.com/?azx0vzbigzi

All times are GMT. The time now is 06:37 AM.Page 3 of 5 < 1 2 3 4 5 >



http://www.mediafire.com/?azx0vzbigzihttp://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://redtyger.co.uk/http://redtyger.co.uk/http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.mediafire.com/?azx0vzbigzi


12/15

Page 4 of 5 < 1 2 3 4 5 >





triplebit 04-28-2008 08:32 AM

thank e398bk and naset,

Let me try this.

mehditop 04-28-2008 01:23 PM

thank's naset :) i will try

naset 04-28-2008 03:02 PM

plz tell me if it works for u.. :)

mehditop 04-28-2008 08:05 PM

ok i tell you, i rename the CG35? and it will function with the bootloader methode ?

naset 04-29-2008 03:30 AM

dont rename cg35..juz let it be CG35.smg and copy to your sd/mmc.install ekonsole orqonsole in your e680i,run the program and type:

cp/ mmc/ mmca1/ CG35.smg/ dev/ tffsa

and tap button enter.wait until it finish(about 5 minute).

mehditop 04-29-2008 06:16 PM

what about this "Configure_CG35.lin" ?
http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/member.php?u=19408http://www.motorolafans.com/forums/member.php?u=19408http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/


13/15

mehditop 04-29-2008 07:23 PM

ohhhhhhhhhhhh yesssssssssss .naset you're the topit work fine for mebiggggg thank's naset """"""""respect""""""""""finaly "Configure_CG35.lin" it's for what? i touch or not?:):):):):):):):):)

naset 05-01-2008 03:16 AM

Configure_CG35.lin is for install new default theme that is gnome bluecurve by eakrin.juz tap it/openwith with lin loader and restart phone.

thakilla 05-02-2008 07:58 AM

naset, ape beza cg 33 ko ngan cg33 e398bk?

sound lebih kuat tak?

naset 05-02-2008 01:55 PM

cg33 aku beza font.font iphone.yg lain sama dgn sandman punya cg33 sbb aku amik

yg sandman punya.sound kuat.

All times are GMT. The time now is 06:37 AM. Page 4 of 5 < 1 2 3 4 5 >



http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://redtyger.co.uk/http://redtyger.co.uk/http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10


14/15

Page 5 of 5 < 1 2 3 4 5





thakilla 05-02-2008 02:06 PM

boleh tak kalau aku nak pakai cg33 ko without flashing?aku skrg pakai firmware e690g 009, cg33 35 36 e398bk punya.

naset 05-02-2008 02:27 PM

yes u can.u must use flashkit.it is a bit tricky.better flash again tho. :)

thakilla 05-02-2008 06:33 PM

thnx naset. er..ringtone stored in cg35 rite?

naset 05-03-2008 02:44 AM

ur welcome kawanku.:) yes,ringtones stored in cg35. :)

sassyboy2412 05-04-2008 05:56 AM

There are a new update 2.0 which is going to appear this afternoon ... all wait ...thanks

jendral_hxr 05-06-2008 01:22 AM

SxU

@thakilla

bagus kh pakai cg-nya e398bk?
http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/showthread.php?t=18296http://www.motorolafans.com/forums/forumdisplay.php?f=23http://www.motorolafans.com/forums/index.phphttp://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/


15/15

All times are GMT. The time now is 06:38 AM. Page 5 of 5 < 1 2 3 4 5



http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://redtyger.co.uk/http://redtyger.co.uk/http://www.motorolafans.com/forums/printthread.php?t=18296&pp=40http://www.motorolafans.com/forums/printthread.php?t=18296&pp=10

Date post:	07-Apr-2018
Category:	Documents
Upload:	imran74
View:	227 times
Download:	0 times

New CodeGroup for g New Flash Method Without Using Telnet

Documents