Read Me FirstRead Me First

FUJITSU Storage ETERNUS CS800 S6

The information in this document is subject to change without notice for improvement and functionality expansion of the ETERNUS CS800 S6.The latest information about the ETERNUS CS800 S6 is available at the following website:http://www.fujitsu.com/global/products/computing/storage/data-protection/

Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS CS800 S6 (hereinafter referred to as "ETERNUS CS800 S6").

Read this document and check the shipment package to confirm that no items are missing.Refer to the ETERNUS CS800 S6 manuals that are listed in this document as necessary.

The company names and product names mentioned in this document are either registered trademarks or trademarks of their respective companies.

Read and understand the "Safety Precautions" before use. "Safety Precautions"

ETERNUS CS800 S6 Manuals .......................... 2

Package Contents .......................................... 3

Related Constitutions .................................. 10

Table of Contents

P3AM-8902-03EN

Copyright 2016 FUJITSU LIMITED

2 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

Manual Title Description

Read Me First (this document) Describes how the manuals are organized, package contents, and the related constitutions.

Safety Precautions Describes the safety precautions that must be taken.

User Guide Describes the functions, initial setup, and system operation.

User Guide - Command Line Interface -

Explains how to monitor and set the ETERNUS CS800 S6 via Command Line Interface (CLI).

User Guide - Advanced Reporting -

Explains how to utilize the performance data logs, visual reports, and graph function via ETERNUS CS800 S6 Advanced Reporting.

OST Guide Explains how to configure OST Optimized Replication to use with NetBackup or Backup Exec.

ETERNUS CS800 S6 ManualsThe manuals are available at the following website:http://storage-system.fujitsu.com/global/doc/cs/

3 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

□ CS800 controller (x 1)

□ Rack mount kit (x 1 set) □ Rack rail (x 1 set)

□ M5 flat head screw (x2) □ M5 screw (x 4)

□ Unlocking tool (x 1)

Package ContentsCheck the contents in the package contents list to make sure that none of the contents for the purchased product are missing. Put a check mark in the checkbox for each item confirmed. If there is a missing item, contact your sales representative.

● Store the package contents in a safe and secure location, as they may be needed again when making changes to the system or reinstalling the software.

● Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.

ETERNUS CS800 S6 Entry (8TB) (Product ID: ECS08FCU, ECS08FCC, ECS08FCA) □ Cable clamp (x 2)

For preventing the power cable from falling out

□ Read Me First (x 1) □ Safety Precautions (x 1) □ Safety Notes and Regulations (x 1)

□ ServerView Suite (x 1 set) □ OST Plug-in DVD (x 1)

□ CS800 controller (x 1)

□ Rack mount kit (x 1 set) □ Rack rail (x 1 set)

□ M5 flat head screw (x2) □ M5 screw (x 4)

□ Unlocking tool (x 1)

ETERNUS CS800 S6 Entry Extendable (8TB) (Product ID: ECS08FDU, ECS08FDC)

□ Unit label (x 1)

□ Cable clamp (x 2)For preventing the power cable from falling out

□ Read Me First (x 1) □ Safety Precautions (x 1) □ Safety Notes and Regulations (x 1)

□ ServerView Suite (x 1 set) □ OST Plug-in DVD (x 1)

4 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

ETERNUS CS800 S6 Scale (32TB) (Product ID: ECS08FGU, ECS08FGC, ECS08FGA)

● Controller unit □ CS800 controller (x 1)

□ Unit label (x 1)

□ Nylon zip tie (x 8)For attaching the cable display label

□ Cable display label (x 1)For displaying the cable connection destinations

□ Rack mount kit (x 1set) □ Rack rail (x 1 set)

□ M5 flat head screw (x 2) □ M5 screw (x 4)

□ Unlocking tool (x 1)

□ Cable clamp (x 2)For preventing the power cable from falling out

□ Read Me First (x 1) □ Safety Precautions (x 1) □ Safety Notes and Regulations (x 1)

□ ServerView Suite (x 1 set) □ OST Plug-in DVD (x 1)

5 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

● Base storage unit □ Controller enclosure (x 1)

□ Flange cover (x 1 set)

□ Rack mount kit (x 1 set) □ Rack rail (x 1 set)

□ Plate (x 2) □ Washer (x 4)

□ M5 screw (x 3) □ M5 flat head screw (x 8)

□ Pin (x 1)For pushing the FUNCTION button

□ Fibre Channel cable (x 2) Dual LC connector ↔ Dual LC connector (5m)For connecting the controller unit with the base storage unit

□ LAN straight cable (x 2) RJ45 ↔ RJ45 (5m)For connecting the controller unit with the base storage unit

□ Read Me First (ETERNUS DX100 S3) (x 1)

6 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

ETERNUS CS800 2 x HBA, 4 x 1Gb Eth/HBA (Product ID: ECSD166) *1

□ Quad Port 1GbE card (x 2)

*1: This product is pre-installed in the controller unit prior to shipping.

ETERNUS CS800 2 x HBA, 2 x 10Gb Eth/HBA (Product ID: ECSD176) *1

*1: This product may be pre-installed in the controller unit prior to shipping.

□ Dual Port 10GbE card (x 2)

□ 10GBASE-SR SFP+ (x 4)

7 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

ETERNUS CS800 2 x HBA, 2 x 8Gb FC/HBA (Product ID: ECSD116) *1

□ Dual Port 8Gb FC card (x 2)

*1: This product is pre-installed in the controller unit prior to shipping.

ETERNUS CS800 HBA, 2 x 10Gb Eth/HBA (Product ID: ECSD186) *1

□ Quad Port 10GbE card (x 1)

ETERNUS CS800 HBA, 2 x 8Gb FC/HBA (Product ID: ECSD156) *1

□ Dual Port 8Gb FC card (x 1)

*1: This product is pre-installed in the controller unit prior to shipping.

*1: This product may be pre-installed in the controller unit prior to shipping.

□ 10GBASE-SR SFP+ (x 2)

8 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

ETERNUS CS800 S6 Entry Base Upgrade (Product ID: ECSD266U) *1

*1: This product may be pre-installed in the controller unit prior to shipping.

□ Disk drive (x 6)

ETERNUS CS800 S6 Entry Extendable JX Base (16TB) (Product ID: ECSD561U)

□ Rack mount kit (x 1 set) □ Rack rail (x 1 set)

□ Plate (x 2) □ Washer (x 8)

□ M5 flat head screw (x 8) □ M5 screw (x 4)

□ ETERNUS JX disk cabinet (x 1)

□ Flange cover (x 1 set)

□ SAS cable (x 1) mini SAS HD (1.1m)

9 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

ETERNUS CS800 S6 Entry Extendable JX Upgrade (Product ID: ECSD562U) *1

*1: This product may be pre-installed in ETERNUS JX disk cabinet prior to shipping.

□ Disk drive (x 6)

ETERNUS CS800 S6 Scale Extension Shelf (32TB) (Product ID: ECSD264U, ECSD264UL) ETERNUS CS800 S6 Scale Hotspare Kit (32TB) (Product ID: ECSD363U)

□ Rack mount kit (x 1 set) □ Rack rail (x 1 set)

□ Plate (x 2) □ Washer (x 4)

□ M5 screw (x 4) □ M5 flat head screw (x 8)

□ Drive enclosure (x 1)

□ Flange cover (x 1 set)

□ Cable between enclosures (x 2) mini SAS HD (0.75m)

10 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

Related Constitutions ● Applicable EnvironmentThe ETERNUS CS800 S6 was designed and manufactured for general office use, with user safety in mind. When using the ETERNUS CS800 S6, follow the handling instructions, and the placement and cautionary notes listed in the manuals. If used beyond the limits described, the users may be at risk of personal injury and/or material damage.

● Using the ManualsThe manuals for the ETERNUS CS800 S6 contain important information regarding safe usage.Please read the manuals carefully before using the ETERNUS CS800 S6. Pay special attention to "Safety Precautions", and understand the contents thoroughly before connecting.Keep the manuals in a safe place for future reference.Fujitsu pays careful attention to the safe use of its products to prevent user injury and/or material damage. To use the ETERNUS CS800 S6 properly, please follow the instructions in the manuals.

● Maintenance support periodThe standard maintenance support period for the ETERNUS CS800 S6 is five years from the date of purchase, or is defined in your service level agreement (SLA).

● MaintenanceDo not attempt to repair the ETERNUS CS800 S6 by yourself. Ask Fujitsu to dispatch one of its maintenance engineers or a maintenance engineer authorized by Fujitsu for maintenance work.Note that our maintenance engineer may connect maintenance equipment (such as PCs) in order to diagnose the ETERNUS CS800 S6.Maintenance engineers use one of the following connection for maintenance.

Product safety UL60950-1, CSA60950-1, EN60950-1, IEC60950-1, GOSTElectromagnetic Compatibility FCC Part-15 Class A, ICES-003 Class A, EN55022 Class A, VCCI Class A, AS/NZS CISPR22 Class A, CNS13438(C6357) Class A,

CTick, BSMIElectromagnetic Immunity EN 55024CE certification Electromagnetic Compatibility Directive 2004/108/EC, Low Voltage Directive 2006/95/ECEnvironmental compliance RoHS-compliant (Restriction of Hazardous Substances), WEEEcompliant (Waste Electrical and Electronically Equipment)

● Compliance Standards

ƪ Direct connection between an ETERNUS CS800 S6 and a customer's PC

ƪ Direct connection between an ETERNUS CS800 S6 and a management PC (FST)

ƪ Connection between an ETERNUS CS800 S6 and a customer's PC via a network

11 FUJITSU Storage ETERNUS CS800 S6 Read Me First

Copyright 2016 FUJITSU LIMITED P3AM-8902-03EN

● The content of this manual is subject to change without notice. ● This manual was prepared with the utmost attention to detail.

However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual.

● Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.

● The content of this manual may not be reproduced or distributed in part or in its entirety without prior permission from Fujitsu.

FUJITSU Storage ETERNUS CS800 S6Read Me First

P3AM-8902-03ENDate of issuance: July 2016

Issuance responsibility: FUJITSU LIMITED

Laser StandardClass 1M laser product

The following notice is for EU users only.WARNING: This is a product which meets Class A of EN55022. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

The following notice is for USA users only.This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility, air craft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. You shall not use this Product without securing the sufficient safety required for the High Safety Required Use. If you wish to use this Product for High Safety Required Use, please consult with our sales representatives in charge before such use.