New Holland T6000 Series Tractors 100 to 155 hpT6010 T6020 T6030 T6040 T6050 T6060 T6070 T6080

Flexible T6000 tractors satisfy the demands of many operations.

2

Class-leading performance and reliability

New Holland’s formula for out-standing T6000 tractor performanceinvolves mixing raw power andsuperior control with the ultimate incustomer flexibility. T6000 tractors area natural choice for livestock, arableor contracting applications.

Delta, Plus or Elite ModelsWhether you’re looking for proven

performance in a value package or atractor that gives you the latest elec-tronic conveniences and push-buttonsimplicity, the NEW T6000 Seriestractors are built for you. You choosethe model that’s configured perfectlyfor your application.

• Delta configuration models offer class-leading performance in abase-level configuration for tightbudgets.

• Plus configuration models raisethe bar for on-the-job performance,offering a range of options includinga semi-powershift transmission, high-er-capacity closed-center hydraulicsystem, and the Horizon cab withadded comfort features.

• Elite configuration models deliver top-of-the-line comfort and performance features includingengines with Electronic PowerManagement, Power Boost (in trans-port and PTO applications), Custom

Headland Management, andElectronic Draft Control.

Options that payA wide selection of transmissions

and front axle options allows you tocustomize a T6000 tractor that willpush your productivity over the top.Choose from optional features available on some models, like thesharp-turning SuperSteer™ FWDaxle, ultra-smooth Terraglide™ axle,the FastSteer™ steering system,Comfort Ride™ cab suspension or the deluxe cab package.

Precision and comfortSuperior T6000 tractor perform-

ance converges in the high-visibilityHorizon™ cab that is standard equipment on Plus and Elite models,and optional on Delta models. It’s acommand center of comfort and precision like no other.

Every piece of the job falls intoplace when you take your seat inthe Horizon cab…

Operator Station Available Versions Available

Models Engine Horizon™ Flat-Deckhp Cab ROPS Delta Plus Elite

T6010 100 X X (Delta only) X X –T6020 110 X X (Delta only) X X XT6030 115 X X (Delta only) X X XT6040 120 X – – – XT6050 125 X X (Delta and Plus) X X XT6060 130 X – – – XT6070 140 X – – X XT6080 155 X – – – X

A - Dedicated left-hand shuttle control allowsyou to shift between forward and reverse easilywith your right hand free to control the loader or implement. No clutching required (except for Delta models equipped with the 12x12 Synchro-Command transmission).

B - FastSteer™ Steering System option allowsa full right- or left-hand turn by moving thesteering wheel just 10 degrees. It’s perfect foruse in loader or row crop applications to reducefatigue and repetitive motions.

C - Throttle lever is located close for easyengine speed adjustment.

H

3

G - Hydraulic remote levers are color-codedand positioned at an angle to come easily tohand. Electrohydraulic remote valves are available on Plus and Elite models.

H - Optional full-size, supportive instructorseat folds down when not in use, providing beverage holders and a handy work area.

I - Seat-mounted joystick and mid-mountloader valve are available on all T6000 modelsfor convenient fingertip control. Third-functionhydraulics (if so equipped) are controlled usingthe button on the top of the joystick.

Deluxe cab option (available on Elite models)includes added comfort and convenience features like automatic temperature control,electronically adjusted telescoping, heated mirrors, electrohydraulic remotes as standardequipment and the New Holland air suspensionseat with heated cushions.

Comfort Ride™ cab suspension (optional onPlus and Elite models) is a simple, mechanicalsystem that’s effective and always on.

D - Conveniently placed controls come easilyto hand. On Elite Power Command™ models,the throttle, transmission and three-point hitch controls all travel with the seat for maximumcomfort and control.

E - Analog and digital instrumentation and aseries of 21 indicators and warning lights keepyou informed at a glance.

F - Electronic draft control (optional on Plus, standard on Elite models) provides precise hitchcontrol with lower link draft sensing.

G

B

F

C

A

E

I

D

IR8001 T6000.qxd 10-10-2008 16:05 Pagina 3

4

High-visibility command center

Enjoy a spacious work space and natural controls with the T6000 flat deck or Horizon™ cab.

A lot of thought was invested inthe creation of the T6000 operatorarea. Whether you choose a modelwith flat-deck ROPS platform or theall-weather comfort of the Horizon™cab, you get space, comfort, controland view that make your work easier.The throttle, transmission, hydraulicand hitch controls are placed in a nat-ural position for easy, fingertip con-

trol. And, the sloped T6000 hoodgives you an unobstructed view ofthe work area around you.

The T6010 Delta flat deckThe T6020, T6030 and T6050 Delta

models are available in flat-deckROPS. A deluxe seat with mechanicalsuspension swivels and adjusts to fityou perfectly, and the steering wheel

tilts to suit your preference. Glasscomfort shielding to the front at floorlevel keeps noise to a minimum.

High-visibility Horizon™ cab –no other cab comes close

When you enter the Horizon cab,prepare yourself for ultra-quiet com-fort. Interior sound level is as low as70 dba. Add spacious dimensions and

IR8001 T6000.qxd 10-10-2008 16:05 Pagina 4

attention to detail, and it’s easy to seehow the Horizon cab makes youmore productive. The deluxe air-rideseat swivels, supports, and adjusts formaximum comfort, while an optionalfull-size instructor seat puts co-work-ers at ease, too. A full 5.85 squaremetres of glass provides clear sight-lines in every direction. There’s evena high-visibility roof panel to providean upward view that makes it easy tosee a raised loader bucket. Aretractable sunshade blocks glare onDelta models, and an automotive-

style sunshade on Plus and Elitemodels opens for fresh air.

Deluxe cab upgradeStep up to the Deluxe cab

option on your Elite modeltractor and you get theadded comfort of the

New Holland air-ride seatwith heated cushions. The

automatic temperature controlsystem supplies heat and air condi-tioning as needed to maintain thetemperature you set. The Deluxe cabalso features heated electronic external mirrors, a speaker upgradeand electrohydraulic rear remotes as standard equipment.

Optional Comfort Ride™ cabsuspension

For the absolute smoothest rideover bumpy ground, choose theComfort Ride™ Cab Suspensionoption available on Plus and Elitemodels. This simple mechanical system is always on. Two isolation“donuts” at the front corners of thecab and a swaybar and two shockabsorbers at the rear isolate you fromup-down motions and side-to-sideswaying.

5

A comfortable, supportive, full-size instructor seat is a Horizon cab option.

The Horizon cab features an optional high-visibilityroof panel for an easy view to a raised loader bucket.

An enhanced performance monitor and radar areoptional on all Plus and Elite models, allowing youto track and program a variety of functions includ-ing linkage height, PTO speed, hours, distancetraveled and electronic remote valve status.

IR8001 T6000.qxd 10-10-2008 16:06 Pagina 5

FastSteer™ efficiency

Whether you will use your T6000Series tractor for row-crop work orwith a loader, the FastSteer™ turningsystem option saves you effort andtime. This innovative system is available on Plus FWD models andElite models.

No more revolutionsThe FastSteer system allows you to

complete a hard right or left turn bymoving the steering wheel a mere 10degrees. Imagine the energy you will

save by simply nudging the steeringwheel at the headland or the nexttime you turn to load a bucketful ofsilage or manure. No more turning,turning and turning the wheel.

Just press the inner ringTo use the FastSteer system, first

press the rocker switch on the right-hand “C” pillar to make the systemavailable for use. Then, when you’reready to make your turn, simplypress the inner ring of the steering

wheel to engageFastSteer. A lighton the instrumentpanel indicatesthe system isengaged. Normalsteering returnsinstantly whenyou release theinner ring of thesteering wheel. For safety, theFastSteer system will only engage atspeeds below 10 km/h.

Move the steering wheel only 10 degrees to execute a full turn.

6

IR8001 T6000.qxd 10-10-2008 16:06 Pagina 6

CUSTOM HEADLAND MANAGEMENTAn optional feature on Elite T6000 models, the New Holland Custom Headland

Management system memorizes and replays a series of up to 28 tasks, allowing you tomanage your headland turning routine with the press of a button. You can “record” and“play back” two separate sequences—one for exiting the row; the second for enteringthe next row—including the changes you make to the following:

• Transmission upshift/downshift• Engine speed• Engage/disengage constant RPM “cruise” control• Three-point hitch position• Electrohydraulic valve operation (if so equipped)• (NOTE: The TerraLock™ system will automatically disengage FWD and diff lock as

you turn and re-engage them when required.)The Custom Headland Management system reduces repetition to give you a well-

deserved break from the juggling act normally required for headland turns. Add thisconvenience of this system to the effortless turning provided by the FastSteer option,and you handle row after row with minimum effort.

Switches on the right-hand console are used to alert the system that you are ready to record (A) or playback (B) a sequence of actions. Then, press the “step” button to actually activate the recording or play-back. The step button is located on the multi-controller (C) on Elite six-cylinder models, and on the seat-mounted electronic draft control mouse on Elite four-cylinder models.

7

To engage FastSteer, simply press on the inner ring of the steering wheel. The FastSteer system automatically disengages when travel speed exceeds 10 km/h.

B

A

IR8001 T6000.qxd 10-10-2008 16:06 Pagina 7

8

You encounter tough conditionsevery day, and T6000 tractor enginesare up to the challenge. Turbochargedfour-cylinder engines on the T6010,T6020, T6040 and T6060 and six-cylin-der engines on the T6030, T6050,T6070 and T6080 provide depend-able, quiet power day in and day out.With up to 47% torque reserve on tap(depending on model), these engineswill respond when terrain, soil orcrop conditions get really tough.

Reliable designThese time-proven engines feature

a durable, computer-designed, parent-bore cylinder block for extend-ed life. The contoured block design features a contoured outer surface for increased structural strength. Air-to-air intercooling (all modelsexcept the T6010) improves perform-ance, while a five-blade viscous fan maintains temperature, reducesnoise, lowers horsepower consump-tion, and saves fuel.

Fuel efficient, tooDelta and Plus models feature a

mechanically governed rotary fuelinjection pump with two valves percylinder that provides simple yet responsive control. On Elite models, a high-pressure common-rail (HPCR)electronic power management systemdelivers superb fuel efficiency, fastresponse, low noise and low emis-sions.

Horsepower that growsThe electronic fuel management

system on Elite models saves fuel,ensures fast response and a PowerBoost for up to 25 horsepower duringPTO and transport applications.

Power Boost compensates for drive-line power loss, helping maintainyour speed on hilly terrain and roadsso you can maintain peak perform-ance. Another advantage of electronicpower management is the conven-ience of a Constant RPM system, or“cruise” control. Where preciseengine speed is essential to optimumperformance, the Constant RPM system letsyou programtwo engineRPM settingsand togglebetween themas needed tostreamline field work like baling.

Easy servicingNew Holland invested a lot of

thought in the design and servicing ofT6000 tractors. Routine maintenanceand fueling can be completed easilyfrom ground level. Engine oil can bechecked and filled at the same convenient point, without raising thehood. And, the 600-hour oil changeinterval means you don’t need tohandle this task as often. If it’s timefor more thorough servicing, theentire hood glides open on a gas strutto provide you with complete engineaccess. You have unobstructed accessto everything, including the engineair filter and radiator.

• A sight glass replaces a dipstickfor a quick visual check of the trans-mission oil level.

• The oil cooler and A/C con-denser slide or swing out to the side(depending on model) for easycleaning.

• A swing-out battery tray allowsfor fast battery access.

T6000 engines deliver outstanding power with less fuel, lower emissions.

Responsive power

Reduce emissions and foreign oil imports by using B20 biodiesel

blends (meeting ASTM 6751 or EN 14214 Standards)

in T6000 tractors.

IR8001 T6000.qxd 10-10-2008 16:06 Pagina 8

9

You can check the oil without raising the hood.A one-piece, flip-up hood opens smoothly on a gasstrut with open access to the engine, radiator, A/Ccondenser and filters.

IR8001 T6000.qxd 10-10-2008 16:07 Pagina 9

When you step up to an EliteT6000 tractor equipped with the electronic six-cylinder engine, youcan also step up to the flexibility and control of the Power Command™ full powershift transmission. Thispremium transmission offers the ultimate in convenience and person-alized programming.

Automatic shifting in the field,and on the road

A patented torque sensing systemallows the Power Command trans-mission to do the shifting for you,with no mechanical shifting required.Simply press the “Auto” button for

automatic shifting that rivals thesmoothness of your car or truck. You program the transmission toautomatically shift when speedincreases or decreases by 5, 10, 15, 20,25, or 30 percent—whatever suitsyour application. In the field, the system maintains your throttle settingand automatically shifts up or downas needed from gears one to 11.

When using the “Auto”mode while transporting,you have access to gears 7through 18.

Six-cylinder Elite models feature the ultimate in “set and forget” convenience.

10

Smooth Power Command™

full powershift

IR8001 T6000.qxd 10-10-2008 16:07 Pagina 10

Programmable power shuttleA touch of the lever located on the

left side of the steering wheel andyou shift from forward to reverse. No need to clutch, no need to stop.You don’t even need to remove yourhand from the steering wheel. Youcan also program this convenientpower shuttle to the best reverse andforward gears for each job.

Just the right speedWith nine of the 18 forward speeds

are in the three to twelve km/h work-ing range, Power Command trans-mission gives you a choice of speedsto match every job. A 40 km/h trans-port speed gets you from one place toanother in a hurry.

19x6 Economy version availableChoose the Economy Power

Command™ transmission and youachieve the maximum 40 km/h trans-port speed at a lower engine speedfor improved fuel efficiency.

Faster Mover 50 km/h transportoption

A19x6 Power Command™ trans-mission provides an additional

forward speed that allowsT6000 Elite tractors to achieve a higher 50 km/h speed (tire

restrictions apply).

11

The convenient seat-mounted multi function con-troller gives you complete transmission control onPower Command equipped models.

The clutch-free power shuttle is electro-hydraulical-ly engaged and located to the left of the steering col-umn for easy fingertip control.

Just press the “Auto” button, and the PowerCommand™ transmission automatically shifts upor down within a span of gears based on engineRPM and applied flywheel torque.

A Choice of TransmissionsA selection of transmissions

allows you to equip T6000 Seriestractors to match your job applica-tions. All transmissions offer theconvenience of a dedicated, col-umn-mounted, left-hand shuttlelever, making T6000 Series tractorshighly efficient at loader work.And, all configurations (except17x16 transmissions) are availablewith a creeper option for low-speedapplications.

Delta Models (T6010, T6020, T6030, T6050)• 12x12 Synchro Command™• 24x24 Dual Command™• 16x16 ElectroShift™

Plus Models(T6010, T6020, T6030, T6050, T6070)• 24x24 Dual Command™• 16x16 ElectroShift™• 16x16 AutoShift™

Elite Four-Cylinder Models(T6020, T6040, T6060)• 16x16 AutoShift™• 17x16 AutoShift™ Economy• 17x16 AutoShift™ 50 km/h

Elite Six-Cylinder Models(T6030, T6050, T6070, T6080)• 16x16 AutoShift™• 17x16 AutoShift™ Economy• 17x16 AutoShift™ 50 km/h• 18x6 Power Command™• 19x6 Power Command™

Economy• 19x6 Power Command™

50 km/h

IR8001 T6000.qxd 10-10-2008 16:07 Pagina 11

12

Whether you’re doing field workor haulage, there’s a dependableT6000 transmission with the speedsand features that suit the work you do.

16 x 16 ElectroShift™ transmission with power shuttle(Available on all Delta and Plus models)

This transmission gives you touch-button powershifting through thefour gears of each range, plus aclutch-free shift between first and

second range, and between the thirdand fourth range. You only need theclutch once in 16 gears. An electro-hydraulic power shuttle also lets youshift from forward to reverse withoutclutching for easier loader or gradingwork. Program the reverse gear youprefer for the work you’re doing.

16x16 AutoShift™ Transmissionwith power shuttle(Available Plus and Elite models)

Offering the same operational con-venience as the 16 x 16 ElectroShift™transmission, AutoShift™ provides

Easy shifting and shuttling

Choose the transmission that’s geared for your work.

IR8001 T6000.qxd 10-10-2008 16:07 Pagina 12

even more time-saving features. Pushthe “Auto” button while operating inthe field, and the AutoShift transmis-sion does the shifting for you withinthe four gears of Ranges A (Gears 1 to4), B (gears 5 to 8) or C (Gears 9 to 12).When roading, press the AutoShiftbutton once to shift as needed withinRanges C or D; press the AutoShiftbutton twice to move freely from gear9 through gear 16 and back down asneeded without stopping to shift

between ranges C and D. An illumi-nated LED gear display, located to theright of the main shift lever, displaysthe gear on tractors equipped withthe AutoShift transmission.

17x16 Economy AutoShift™Transmission with power shuttle(Available on Elite models)

Get added fuel economy with aneconomy drive that achieves the maximum 40 km/h transport speedat a lower engine speed.

17x16 50 km/h AutoShift™Transmission with power shuttle (Available on Elite models*) *tire restrictions apply

Achieve a faster 50 km/h maxi-mum speed to save time betweenlocations.

12 x 12 Synchro Command™transmission with mechanicalshuttle(Available on Delta models)

The 12x12 transmission is the picture of simplicity, reliability andeconomy. The range lever at the farright allows you to choose one ofthree ranges while the main shiftlever offers four synchronized gearsin each range. A dedicated, in-lineshuttle lever on the left-hand side ofthe steering column allows you toshift between forward and reverse.

24 x 24 Dual Command™ Hi-Lotransmission with power shuttle(Available on Delta and Plus models)

The Dual Command transmissiongives you the added convenience ofclutchless forward-reverse shuttling,as well as twice the number of speedchoices. An underdrive for each of thetwelve forward and reverse gearseffectively increases torque by 27%

and reduces tractor speed by approxi-mately 22%. Dual Command buttonsare located right on the gearshift leverto allow you to powershift on-the-gowithout clutching. Use the lower button (tortoise) to engage the under-drive. Push the upper button (hare) to disengage Dual Command andreturn to direct drive. This transmis-sion provides the benefit of up to 11 speeds in the two- to eight-mphworking range for maximum versa-tility. Transport speed is 30 km/h for 2WD models and 40 km/h forFWD models.

13

The 24x24 Dual Command transmission doublesyour gears from 12 to 24. Underdrive button on theside of the shift lever and on the console (B) allowsyou to powershift on-the-go without clutching.

AutoShift™ transmissions provide automatic shifting in the field or one the road. You programthe shift point and shuttle preferences.

IR8001 T6000.qxd 10-10-2008 16:07 Pagina 13

You’ll appreciate the flexibility and unwavering power of the T6000 hydraulic system. While thehydraulic systems found on sometractors rely on a single pump, theT6000 hydraulic system uses twopumps for better response and theability to perform multiple hydraulicfunctions simultaneously – withoutsacrificing performance.

Two pumps are better than oneThe open-center hydraulic system

used on Delta and Plus models fea-tures a 63 (Delta) or 80 (Plus) litres-per-minute (lpm) fixed-displacementgear pump and a separate 40 lpmsteering pump (47 lpm on modelsequipped with the 16x16 transmis-sion). Elite models offer a moreadvanced closed-center load-sensing

hydraulic system (optional on Plusmodels) and a variable-displacement piston pump that delivers a flow of100 lpm to the rear remotes, three-point hitch and loader. A separate 40 lpm pump provides flow for steering and services circuit. Flow control is standard equipment.Configurable detents are standard on Elite models and optional on Plusmodels. For maximum in-cab control,Plus and Elite models can beequipped with two, three or fourfully programmable electro-hydraulicremotes. You control the flow rateand program the timing of each valveright from your tractor seat.

Impressive lift capacityThree-point hitch capacity for

T6000 Series tractors is up to 8,257 kg

for Elite models and up to 7,864 kgfor Plus models. Delta models featuremechanical draft control with a liftcapacity up to 6,332 kg. Telescopingstabilizers and optional flexible orhook-type link ends on all T6000models make it easy to hook up and change implements.

Mechanical draft control simplicity

Delta and Plus models feature a simple mechanical draft control(MDC) system that uses lower-linkdraft sensing to precisely maintaindraft loads while working in the fieldwith three-point-mounted imple-ments. (MDC is not available on theT6070.) Models with MDC also feature the convenient Lift-O-Matic™system that allows you to raise or

14

Responsive hydraulics

Ample flow and lift capacity expand the versatility of your T6000 tractor.

IR8001 T6000.qxd 10-10-2008 16:07 Pagina 14

lower an implement with the touch of a button, without altering the draftsettings—a real time-saver duringheadland turns.

Added EDC benefitsElectronic Draft Control (EDC)

allows for precise, automatic controlof three-point-mounted implementsusing lower link draft sensing tomaintain a constant load on the hitchthrough changing soil conditions.T6000 tractors equipped with electronic draft control also get the convenience of fast hitch raise/lowercontrol both inside the cab and on therear fenders. Dynamic Ride Control isalso standard equipment on EDC-equipped tractors to help preventthree-point-mounted implementsfrom “bouncing” on the rear hitch

during transport, giving you greatercontrol and a more comfortable ride.

Soft start PTOThe PTO engages electro-hydrauli-

cally for smooth starts and featuresSoft Start for added implement pro-tection during start up. A PTO Coast Downswitch allows you to manually over-ride the PTO brake to control high-inertia loads. Optional fender-mount-ed PTO controls on cab models makehook-up easy.

15

Hydraulic control levers and remote coupler dustcovers are color-coded to assist with easy implementhook up and control.

Quick-raise hitch switches are provided on both rearfenders on tractors equipped with electronic draftcontrol. An exterior PTO switch is also optional on the rear fender of all cab models (except 12x12transmission). Press the button for less than fivesecond for a pulsing action that makes it easier tohook up the PTO shaft. Hold the button for longerthan five seconds to fully engage the PTO.

IR8001 T6000.qxd 10-10-2008 16:07 Pagina 15

16

Get added control with SuperSteer™ or TerraGlide™ axle

IR8001 T6000.qxd 10-10-2008 16:08 Pagina 16

17

Select from two optional FWD axles to boost your efficiency.Two innovative New Holland

FWD axle options give you advan-tages in the field and on the road.

Fast, sharp SuperSteer™ turnsAdd the patented SuperSteer™

FWD axle to your T6000 Plus or Elitetractor and you increase the standard55-degree turn angle to an unmatched65 degrees. You turn sharper andfaster for easier maneuvering in tightspaces and small fields. And, row-crop operations achieving a 35%reduction in headland turn time—ahuge advantage. Equip a SuperSteertractor with the FastSteer™ option,and you get the absolute ultimate insimple turning.

The exclusive New Hollanddesign

As the tractor turns, the wholeSuperSteer axle pivots, adding 20degrees of articulation to the standardturn angle of 45 degrees. The insidetire moves away from the tractor, providing more tire clearance, asharper turning angle and reducedturnaround diameter.

A smooth TerraGlide™ rideEquip your T6000 Series Plus or

Elite model tractor with theTerraGlide™ FWD axle and you getan ultra-smooth ride along with better traction, stability and control inany terrain. The TerraGlide axle pro-vides a remarkable 100 mm of travelto keep the front tires in contact withthe ground, so you ease over roughspots in rutted fields or bumpy roads.You enjoy a more comfortable ridebut, more importantly, you also getbetter control. The TerraGlide axlehelps keep the tractor grounded formore consistent loading on the fronttires, resulting in greater traction, upto a 5% increase in drawbar pull, bet-ter stability and better steering con-trol.

No complicationsThe TerraGlide FWD axle is a

simple, affordable design – not likethe complicated systems found onother tractors. Another unique feature: the system can be turned off!The TerraGlide axle is activated attractor start up but can be locked outbetween speeds of 1.5 and 12 km/husing an override switch in the cab.To ensure your comfort and safety,the suspension is automaticallyengaged at speeds over 12 km/h.

Heavy-duty rear axlesT6000 rear axles feature inboard

planetary final drives with threelarge, heat-treated planet gears tohandle high-torque loads. Heavy-duty flange or 2,489-mm bar axles areavailable on all models for maximumflexibility. Six-cylinder Elite modelsare also available with a 2,844-mmbar axle and dual tires.

T6000 Tractor Models

4- or 6-Cyl. 4-Cyl. 6-Cyl. 4-Cyl. 6-Cyl.Front Axle Choices Delta Plus Plus Elite Elite

Heavy Duty 2WD Axle with 8-bolt hub X X X

Heavy Duty Class 3 FWD Axle with limited slip differential X X X (except T6070)

Heavy Duty Class 3 FWD Axle with TerraLock™ X X X

Heavy Duty Class 3 SuperSteer™ FWD Axle with TerraLock™ X X X

Heavy Duty Class 3 TerraGlide™ FWD Axle with TerraLock™ X X X

Ultra Duty Class 4 FWD Axle with TerraLock™ X X

Ultra Duty Class 4 SuperSteer™ FWD Axle with TerraLock™ X X

Ultra Duty Class 4 TerraGlide™ FWD Axle with TerraLock™ X X

The SuperSteer axle moves the inside wheel out andaway from the tractor frame, providing more tireclearance and a greater turn angle for faster, sharp-er turns. Add the 20 degrees of axle articulation tothe standard turn angle of 45 degrees for anunmatched total turn angle of 65 degrees.

IR8001 T6000.qxd 10-10-2008 16:08 Pagina 17

18

TerraLock™ traction

Automatic FWD and diff lock engagement provides optimum traction at every moment.You can be sure that maximum

power is put to the ground no matterwhat the working condition whenyour T6000 FWD tractor is equippedwith the New Holland TerraLock™traction system. The TerraLock system provides fully automaticFWD and front and rear differentiallock engagement, allowing full-drive capability through all four wheels formore positive traction. It’s standardon models equipped with theSuperSteer™ or TerraGlide™ FWDaxles, and available on other T6000models.

Three modes match your needsThe TerraLock switch has three

positions—off, full-time and automat-ic. In automatic mode, the TerraLocksystem engages and disengages front-wheel drive and four-wheel differen-tial lock depending on:

• Steering angle• Forward ground speed• 3-point hitch quick raise use• Brake application

Automatic mode gives you thebest performance advantages bydelivering optimum traction whentraveling straight, then disengagingFWD and diff lock when you turn thesteering wheel, to give you bettermaneuverability. If forward speedexceeds 15 km/h, both FWD and differential locks will also temporarily disengage.

When TerraLock is engaged full-time, both FWD and differential lockremain engaged until you activate thebrakes. You also have the option ofturning TerraLock off to completelydisengage FWD and front and reardiff lock.

Four-wheel assisted brakingSelf-adjusting, self-equalizing

hydraulic wet disc brakes deliver thestopping power you need. Whenboth brake pedals are applied simul-taneously, FWD engages automatical-ly to aid in braking action for addedcontrol.

The TerraLock™ system automatically controls FWD and differential lock engagement to give you maxi-mum traction and control.

IR8001 T6000.qxd 10-10-2008 16:08 Pagina 18

19

20

T6000 SERIES T6010 DELTA T6020 DELTA T6030 DELTA T6050 DELTA T6010 PLUS T6020 PLUS T6030 PLUSENGINERated Power - ISO 14396/EC R120 (kW/hp(cv)) 74/101 82/112 86/117 93/127 74/101 82/112 86/117Max. Power - ISO 14396/EC R120

Engine Power Management (kW/hp(cv)) NA NA NA NA NA NA NARated Speed, rpm 2200 2200 2200 2200 2200 2200 2200Max. Torque ISO 14396

(Std/Engine Pwr Management (Nm)) 400@1400 510@1250 522@1250 555@1250 400@1400 510@1250 522@1250Cylinders/displacement, cu.cm 4/4485 4/4485 6/6728 6/6728 4/4485 4/4485 6/6728Torque Rise % (maximum) 24 43 40 38 24 43 40Aspiration Turbocharged Turbocharged Turbocharged Turbocharged Turbocharged Turbocharged TurbochargedIntercooling -- air-to-air intercooled air-to-air intercooled air-to-air intercooled -- air-to-air intercooled air-to-air intercooledHigh pressure common rail electronic/direct injection NA NA NA NA NA NA NA

ELECTRICALStandard alternator, amps 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12vBattery capacity, CCA (standard/optional) 800/960 800/960 800/960 800/960 800/960 800/960 800/960

TRANSMISSION12 x 12 Synchro Command™ Standard Standard Standard Standard NA NA NA24 x 24 Dual Command™ Optional Optional Optional Optional Standard Standard Standard16 x 16 ElectroShift™ Optional Optional Optional Optional Optional Optional Optional16 x 16 Autoshift™ NA NA NA NA NA NA NA17 x 16 Autoshift™, (50 km/h) NA NA NA NA NA NA NA17 x 16 Autoshift™, Economy 40 km/h NA NA NA NA NA NA NA18 x 6 Range Command™ NA NA NA NA NA NA NA18 x 6 Power Command™ NA NA NA NA NA NA NA19 x 6 Power Command™, (50 km/h) NA NA NA NA NA NA NA19 x 6 Power Command™, Economy 40 km/h NA NA NA NA NA NA NAPTO – standard ‘Soft Start’ Standard Standard Standard Standard Standard Standard Standard

AXLESHeavy-Duty 2WD Axle Optional Optional Optional Optional Optional Optional OptionalConventional 4WD Axle w/limitedslip Standard Standard Standard Standard Standard Standard StandardConventional 4WD Axle w/TerraLock™ NA NA NA NA Optional Optional OptionalSuperSteer™ 4WDAxle w/TerraLock™ NA NA NA NA Optional Optional OptionalTerraGlide™ 4WD Axle w/TerraLock™ NA NA NA NA Optional Optional OptionalFastSteer™ Auto Steering NA NA NA NA Optional Optional Optional2WD track width adjustability, mm 1605-2190 1605-2190 1605-2190 1605-2190 1605-2190 1605-2190 1605-21904WD track width adjustability, mm 1580-2337 1580-2337 1580-2337 1580-2337 1580-2337 1580-2337 1580-2337Wheelbase (2WD), mm 2370 2370 2370 2370 2370 2370 2370Wheelbase (4WD), mm 2412 2412 2652 2652 2412 2412 2652

HYDRAULICSLoad-sensing hydraulic type Open centre Open centre (Closed centre optional)Rear remotes 2 std, 3 or 4 opt. 2 std, 3 or 4 mech. or elec.opt.Mid remotes, Electronic Rear 2 or 3 mech mid opt.; elec. NA 2 or 3 mech mid opt.; elec. optionalMain/implement pump flow, L/min. 63 80 (113 optional)Steering and services pump flow, L/min. 40 (47 with 16x16) 40 (47 with 16x16)Total tractor hydraulic flow, L/min. 103 (110 with 16x16) 103 (110 with 16x16)Draft control Mechanical, EDC optional Mechanical, EDC optional3-point hitch category Cat II MDC, Cat II/IIIN EDC Cat II MDC, Cat II/IIIN EDC3-point hitch lift capacity—std./opt., kg at ball ends 4170/6985 4170/6985 4170/6985 4170/6985 4170/6985 4170/6985 4170/6985

CAPACITIESFuel tank, L 176 176 250 250 176 176 250Fuel tank w/SuperSteer, L NA NA NA NA NA NA 230Engine oil, L 10 10 15 15 10 10 15Hydraulic fluid, L 65 (62 16x16) 65 (62 16x16) 65 (62 16x16) 65 (62 16x16) 65 (62 16x16) 65 (62 16x16) 65 (62 16x16)

HORIZON™ CAB w/ HI-VISIBILITY PANELGlass area including hi-visibility panel, m2 5,85 5,85 5,85 5,85 5,85 5,85 5,85Sound level, dBA 70-72 70-72 71-73 71-73 70-72 70-72 71-73

SHIPPING WEIGHTStd. 2WD ROPS, kg 4110 4110 4325 4325 NA NA NAStd. 4WD ROPS, kg 4280 4280 4700 4700 NA NA NAStd. 2WD Cab, kg 4540 4540 4610 4610 4540 4540 4610Std. 4WD Cab, kg 4750 4750 4870 4870 4750 4750 4870Height to top of ROPS, mm 2856 2856 2898 2898 NA NA NAHeight to top of Cab, mm 2775 2775 2819 2819 2775 2775 2819Height to top of exhaust, mm 2726 2726 2770 2770 2726 2726 2770

T6000 Series Tractor Specifications

21

T6050 PLUS T6070 PLUS T6020 ELITE T6030 ELITE T6040 ELITE T6050 ELITE T6060 ELITE T6070 ELITE T6080 ELITE

93/127 104/139 82/112 86/117 90/122 93/127 97/132 104/141 116/158

NA NA 105/142 112/152 107/145 120/163 107/145 131/178 131/1782200 2200 2200 2200 2200 2200 2200 2200 2200

555@1250 625@1250 520/550@1600 543/575@1600 563/573@1600 593/620@1600 594/608@1600 613/678@1600 690/690@16006/6728 6/6728 6/6728 6/6728 6/6728 6/6728 6/6728 6/6728 6/672838 39 46 45 45 47 41 42 37Turbocharged Turbocharged Turbocharged Turbocharged Turbocharged Turbocharged Turbocharged Turbocharged Turbochargedair-to-air intercooled air-to-air intercooled air-to-air intercooled air-to-air intercooled air-to-air intercooled air-to-air intercooled air-to-air intercooled air-to-air intercooled air-to-air intercooledNA NA Standard Standard Standard Standard Standard Standard Standard

120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v 120amp, 12v1300 1300 1300 1300 1300 1300 1300 1300 1300

NA NA NA NA NA NA NA NA NAStandard Standard NA NA NA NA NA NA NAOptional Optional Standard Standard Standard Standard Standard Standard NANA NA Optional Optional Optional Optional Optional Optional NANA NA Optional Optional Optional Optional Optional Optional NANA NA Optional Optional Optional Optional Optional Optional NANA NA Optional Optional Optional Optional Optional Optional StandardNA NA Optional Optional Optional Optional Optional Optional OptionalNA NA Optional Optional Optional Optional Optional Optional OptionalNA NA Optional Optional Optional Optional Optional Optional OptionalStandard Standard Standard Standard Standard Standard Standard Standard Standard

Optional Optional NA NA NA NA NA NA NAStandard Standard Standard Standard Standard Standard Standard Standard NAOptional Optional Optional Optional Optional Optional Optional Optional StandardOptional Optional Optional Optional Optional Optional Optional Optional OptionalOptional Optional Optional Optional Optional Optional Optional Optional OptionalOptional Optional Optional Optional Optional Optional Optional Optional Optional1605-2190 1605-2190 NA NA NA NA NA NA NA1580-2337 1580-2337 1570-2256 1570-2256 1570-2256 1570-2256 1570-2256 1570-2256 1570-22562370 2370 NA NA NA NA NA NA NA2652 2652 2412 2652/2739 (18x6) 2412 2652/2739 (18x6) 2412 2652/2739 (18x6) 2739

Open centre (Closed centre optional) Closed centre2 std, 3 or 4 mech. or elec.opt. 2 std, 3 or 4 mech. or elec.opt.

2 or 3 mech mid opt.; elec. optional 2 or 3 mech mid opt.; elec. optional80 (113 optional) 113

40 (47 with 16x16) 47103 (110 with 16x16) 110

Mechanical, EDC optional EDC EDCCat II MDC, Cat II/IIIN EDC Cat II/IIIN Cat II/IIIN 4170/6985 4170/6985 5516/6985 5516/8259 5516/6985 5516/8259 5516/6985 5516/8259 6689/8259

250 250 176 250/300 (18x6) 176 250/300 (18x6) 176 250/300 (18x6) 300230 230 152 230/300 (18x6) 152 230/300 (18x6) 152 230/300 (18x6) 30015 15 10 15 10 15 15 15 1565 (62 16x16) 65 (62 16x16) 62 (16x16)/ 75 (18x6) 62 (16x16)/ 75 (18x6) 62 (16x16)/ 75 (18x6) 62 (16x16)/ 75 (18x6) 62 (16x16)/ 75 (18x6) 62 (16x16)/ 75 (18x6) 78

5,85 5,85 5,85 5,85 5,85 5,85 5,85 5,85 5,8571-73 71-73 70-72 71-73 70-72 71-73 70-72 71-73 71-73

4325 NA NA NA NA NA NA NA NA4700 NA NA NA NA NA NA NA NA4610 4610 NA NA NA NA NA NA NA4870 4870 4775 4895/5650 (18x6) 4775 4895/5650 (18x6) 4775 4895/5650 (18x6) 5850NA NA NA NA NA NA NA NA NA2819 2819 2775 2819/3010 (18x6) 2775 2819/3010 (18x6) 2775 2819/3010 (18x6) 30102770 2770 2726 2770/2995 (18x6) 2726 2770/2995 (18x6) 2726 2770/2995 (18x6) 2995

New

Ho

llan

dp

refe

rs

lu

bri

can

tsAT YOUR OWN DEALER

The data indicated in this folder are approximate. The models described here can be subjected to modifications without any notice by the manufacturer. The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for any further information.Published by CNH INTERNATIONAL SA. Communications & Advertising. Printed in Italy - 10/08 - TP01 - (Turin)

Safety begins with a thorough understanding of the equipment. Always make sureyou and your operators read the Operator’s Manual before using the equipment.

Pay close attention to all safety and operating decals and never operatemachinery without all shields, protective devices and structures in place.

New Holland.A real specialist in your agricultural business.

Visit our website: www.newholland.comSend us an e-mail: International@cnh.com

YOUR SUCCESS - OUR SPECIALTY