Serving the diesel and natural gas industry for over 60 years.
www.interstate-mcbee.comWorld Headquarters / 5300 Lakeside Ave. / Cleveland, Ohio 44114 / Phone 216-881-0015 / Toll Free 800-321-4234
All original names, numbers, symbols and descriptions are used for reference purposes only and do not imply that any part listed is the product of this manufacturer.
Page 1 of 4® IHC/NAVISTAR is a registered trademark of the IHC/NAVISTAR Engine Company.
New Product Release – October 2012New Inframe Engine Kits for Navistar® 466E MY2004 from Interstate-McBee
M-1879703C94 Inframe Engine Kit – 466E Model Year 2004M-1879705C93 Inframe Engine Kit – 466E Model Year 2004
These engine kit additions expand our broad Navistar® program to include the model year 2004 engine range. These engines incorporate four valve cylinder heads, second generation HEUI injection and EGR exhaust technology. For complete engine overhaul the additional modular style gasket sets required are also available from Interstate-McBee. Reference engine serial numbers for proper kit selection.
New Gasket Kits for Navistar® 466E/570E Engines from Interstate-McBee
M-1842663C93 Gasket Kit – Front Cover / Front Half MY2004M-1842662C91 Gasket Kit – Front Cover / Rear Half MY2004
With the release of these front cover sets Interstate-McBee offers complete gasket set coverage for model year 2004 Navistar® 466E and 570E engines. Use these sets in conjunction with the engine kits above for complete out of chassis engine overhaul.
Additional Navistar® Electronic Sensor Coverage from Interstate-McBee
M-1807369C2 Oil Pressure Sensor – Used on 466E & 530E Engine Models Electronic engines depend on specific sensors and switches for precise engine control. Pictured here is the latest addition to our electronic component coverage for Navistar® 466E & 530E applications. This sensor monitors the oil pressure. Call Interstate-McBee for a current list of engine sensors available.
Serving the diesel and natural gas industry for over 60 years.
www.interstate-mcbee.comWorld Headquarters / 5300 Lakeside Ave. / Cleveland, Ohio 44114 / Phone 216-881-0015 / Toll Free 800-321-4234
New Product Release – October 2012
Page 2 of 4
All original names, numbers, symbols and descriptions are used for reference purposes only and do not imply that any part listed is the product of this manufacturer.
® Caterpillar is a registered trademark of Caterpillar, Inc. ® CUMMINS is a registered trademark of Cummins, Inc.
New Inframe Engine Kits for Caterpillar 3116 / 3126 from Interstate-McBeeMCIF7545 Inframe Overhaul Kit – 3116 with M-1077545 CrownMCIF4621 Inframe Overhaul Kit – 3126 with M-1504621 CrownMCIF4983 Inframe Overhaul Kit – 3126 with M-1334983 CrownMCIF3282 Inframe Overhaul Kit – 3126 with M-1723282 CrownMCIF5044 Inframe Overhaul Kit – 3126 with M-1335044 Crown
Additional coverage for 3116 and 3126 engines is now available. New piston crowns listed above are now available expanding Interstate-McBee’s product offering for these popular engine applications including on highway trucks, vehicular and marine. Interstate-McBee uses only forged steel piston crowns for proper strength and durability. The forged steel piston crowns feature extruded bronze bushings for proper load carrying properties. We also offer major overhaul kits along with piston kits with the crowns listed above.
Additional 3116 crown part numbers M-6I1210, M-6I4248 and M-1077553 along with C7 piston part numbers M-2627330, M-2629288 and M-2382698 are coming in November 2012. Contact Interstate-McBee for exact delivery dates along with engine kit availability.
M-3966342 Cylinder Head Gasket Thick – Overbore Specific 5.9L EGR EnginesM-3966343 Cylinder Head Gasket Thin – Overbore Specific 5.9L EGR Engines
Both of these thickness graded gaskets are now available individually at Interstate-McBee. When over boring or using salvage sleeves on an ISB 5.9L EGR engine one of the above head gaskets will also be required. Refer to the OEM service literature to properly check piston protrusion and determine which graded gasket should be used.
Additional Cummins® ISB Gasket Coverage from Interstate-McBee
M-3966343 M-3966342
Serving the diesel and natural gas industry for over 60 years.
www.interstate-mcbee.comWorld Headquarters / 5300 Lakeside Ave. / Cleveland, Ohio 44114 / Phone 216-881-0015 / Toll Free 800-321-4234
New Product Release – October 2012
Page 3 of 4
All original names, numbers, symbols and descriptions are used for reference purposes only and do not imply that any part listed is the product of this manufacturer.
® CUMMINS is a registered trademark of Cummins, Inc.® Detroit Diesel and Series 60 are registered trademarks of Detroit Diesel Corporation.
M-4995001 Cam Bushing Kit – ISX/QSX Cummins® Models
Interstate-McBee has added the M-4995001 Cam Bushing Kit to our custom kit lineup. This kit contains the injector and valve camshaft bushings required to re-bush one ISX/QSX dual camshaft cylinder head. Order one number and get all the bushings. We take customer requests seriously at Interstate-McBee.
Exclusive Custom Kit Coverage from Interstate-McBee
A-23538247PR – Pin and Roller Kit Exhaust Rocker ArmA-23532937PR – Pin and Roller Kit Intake Rocker ArmA-23513939PR – Pin and Roller Kit Injector Rocker Arm
Interstate-McBee is now servicing ceramic pin and roller kits for popular Detroit Diesel® Series 60 engine applications. These service kits include the latest design ceramic rollers for durability. Be sure that the pins are properly aligned with the oil feed gallery during installation. Alignment marks are stamped on the axel pins to aid in assembly. Service bushings A-8929059 (15mm wide) and A-8929536 (20mm wide) are also available. These bushings must be finished to final size after installation.
Rocker Arm Service Kits are now Available for Series 60 Engine Applications
Fuel Injector Kit for Detroit Diesel® Series 60 from Interstate-McBee
A-23537123 – E3 Injector Seal Kit Series 60 DDEC-VI
This kit contains the two injector o-rings, the nose washer and the hold down bolt which is not to be reused. This kit is used with the E3 injectors used on DDEC-VI engines.
Serving the diesel and natural gas industry for over 60 years.
www.interstate-mcbee.comWorld Headquarters / 5300 Lakeside Ave. / Cleveland, Ohio 44114 / Phone 216-881-0015 / Toll Free 800-321-4234
INTERSTATE-M
cBEE, LLC
5300 Lakeside A
venue • Clevela
nd, Ohio 44114 U
.S.A.
216-881-0015 •
Toll Free: 1-800
-321-4234 • Fax
: 216-881-0805
www.interstate-
mcbee.com • E-
mail: sales@inte
rstate-mcbee.co
m
All manufacturer
’s names, symb
ols and descript
ions are for refe
rence only
and it is not imp
lied that any par
t is the product o
f these manufactu
rers.
® CUMMINS is
a registered tra
demark of Cum
mins, Inc.
Complete Gask
et Set Coverag
e for
CUMMINS
®
Engine Applic
ations
INTERSTATE-McBEE, LLC 5300 Lakeside Avenue • Cleveland, Ohio 44114 U.S.A.
216-881-0015 • Toll Free: 1-800-321-4234 • Fax: 216-881-0805www.interstate-mcbee.com • E-mail: [email protected]
All manufacturer’s names, symbols and descriptions are for reference only and it is not implied that any part is the product of these manufacturers.
® CUMMINS is a registered trademark of Cummins, Inc.
New Replacement Parts for
CummiNs®midrange Engines
B, isB, QsB, isBe, C, isC, QsC, isL, QsL
YO U R R E F E R E N C E S O U R C E F O R . . .
R E p l a C E m E N t pa R t S F O R . . .
Engine Parts & Fuel Injection Systems
PHONE: 216-881-0015Toll Free: 800-321-4234Fax: [email protected]
Interstate-McBee, LLC5300 Lakeside Ave. Cleveland, Ohio 44114www.interstate-mcbee.com
Cummins® EnginesCaterpillar ® Engines Detroit Diesel® Engines Navistar ® EnginesFuel Injection System PartsCummins®Caterpillar ®Detroit Diesel®Navistar ®
Deere ®Ambac ®Bosch®GM® 6.2/6.5Zexel® / Isuzu®Simms-CAV®Stanadyne ®
All manufacturer’s names, symbols and descriptions are for reference only, and it is not
implied that any part is the product of these manufacturers.
Available from Interstate-McBee: Replacement Parts for:
FUEL INJECTION SYSTEMS
Additional information and requirements may be found in our Parts Catalogs
INTERSTATE-McBEE, LLC
5300 Lakeside Avenue • Cleveland, Ohio 44114 U.S.A.
216-881-0015 • Toll Free: 800-321-4234 • Fax: 216-881-0805
www.interstate-mcbee.com • E-mail: [email protected]
All manufacturers’ names, symbols and descriptions are for reference only and it is not implied that any part is the product of these manufacturers.
R E p l a C E m E N t pa R t S F O R . . .
INTERSTATE-McBEE, LLC
5300 Lakeside Avenue • Cleveland, Ohio 44114 U.S.A.
216-881-0015 • Toll Free: 1-800-321-4234 • Fax: 216-881-0805
www.interstate-mcbee.com • E-mail: [email protected]
All manufacturer’s names, symbols and descriptions are for reference only and it is not implied that any part is the product of these manufacturers.
® CUMMINS is a registered trademark of Cummins, Inc.
® Caterpillar and CAT are registered trademarks of Caterpillar, Inc.
New Replacement Parts for CuMMINs® Natural Gas/ CATERPILLAR® spark IgnitedENGINEs
G855G855BC
GTA12L10 240/260G
L10 280/300GGTA 8.3
C8.3GG8.3G PLus
G5.9GTA 5.9
B5.9G
G3508G3512G3516G3520G353G379G398G399G342
G3406G3408G3412G3304G3306
PART
CU
MM
INS
CAT
ERPI
LLA
R
DET
ROIT
DIE
SEL
DEE
RE
STA
NA
DYN
E
BOSC
H
C.A
.V.-
SIM
MS
AM
BAC
ZEXE
L
G.M
.-NAV
ISTA
R
GASKET KITS
••
••
••
••
•
OVERHAUL KITS
••
••
••
•
GASKETS
••
••
••
••
•
THROTTLE SHAFTS•
•
••
GOVERNOR PLUNGERS•
TACH SHAFTS
••
P & Bs
••
•
••
••
TIPS/NOZZLES/CUPS•
••
••
••
•
O-RINGS
••
••
••
••
•
HEAD & ROTORS
•
PILOT TUBES
•
ADVANCE PISTONS
•
INSTALLATION/REPAIR KITS (Injector)
••
•
•
INSTALLATION/REPAIR KITS (Pumps)
••
•
•
THROTTLE LEVERS•
•
•
INJECTORS
••
•
•
•
INJECTOR STACK PARTS•
••
•
FOLLOWERS
••
SPRINGS
••
••
••
••
•
BUTTONS
•
•
FRONT COVERS
••
TRANSFER PUMPS
••
•
•
GLOW PLUGS
•
••
•
Ohio5300 Lakeside Avenue
Cleveland, OH 44114 U.S.A.Tel: 216-881-0015FAX: 216-881-0805
E-mail: [email protected]
California13137 Arctic CircleSanta Fe Springs, CA 90670 U.S.A.Tel: 323-888-0746FAX: 323-727-9314
Serving the diesel industry since 1947 with quality fuel injection and engine parts.
Florida9955 NW 58th StreetDoral, FL 33178-2701 U.S.A.Tel: 305-863-6650FAX: 305-863-6272YRS-5M-2012
Printed in U.S.A.
New Catalogs Now Available
Ask your regional manager for a copy of the new Cummins Gasket Kit reference catalog with information on our complete Cummins gasket kit product offering.
Also available is the new Interstate-McBee Midrange Catalog featuring parts for B, ISB, ISBe, QSB, C, ISC, QSC and ISL, QSL engine applications.
A new “Your Reference Source” fold out is also available reflecting all of our new product additions.
Contact your friendly Interstate-McBee Regional manager for your copies today.
New Product Release – October 2012
Page 4 of 4® CUMMINS is a registered trademark of Cummins, Inc.