Date post: | 14-Aug-2019 |
Category: |
Documents |
Upload: | vuonghuong |
View: | 214 times |
Download: | 0 times |
Newrange ofcontrol desk
A single rangefor a variety of applications
2
A control desk is above all anoperator control station which mustbe functional. By developing thisrange, Himel decided to incorporatecomfort and efficiency for faultlessoperation.
The result of continuously listeningto our customers is quite simply arange of control desks combiningflexibility, ease of mounting thecontrol equipment and ergonomicdesign for machine or processcontrol.
Two technologies meeting IP55 andIK10 requirements:• A Monobloc range• A Modular range
To complement this family ofcontrol desks, a complete range ofaccessories is available, compatiblewith the rest of the Himel range offloor standing enclosures.
Depending on your application, youcan choose between a control deskin sheet steel or in stainless steel.
You can be sure to find your solutionat Himel.
3
Control of industrial machinesand processes - infrastructures
When the operator is placed infull-time control of a machine,a control desk is preferable to afloor standing enclosure, providingeasy control and good supervisionof the process.
Food processing
For machine control in a harshenvironment, Himel proposes acomplete range of stainless steelcontrol desks to alleviate theproblems of corrosion and someet the very strict hygieneregulations.
Monobloc control desksfor customised solutions
4
• A pneumatic retaining stayfacilitates opening of the topof the control desk andprevents it dropping downunexpectedly.
• The cable entry gland platesat the bottom of the controldesk are in two slidingparts to optimise cabling.An adhesive gasket can beadded to these plates toensure dust and dampprotection.
The principle of construction ofthe Himel control desks (patentapplied for) enables total accessto the equipment together withunhindered equipment installation.
This range of monobloc controldesks includes versions with orwithout console.
• Changing the direction ofopening of the doors is fastand does not require specialtools through the use ofscrew-fixed hinges.
• The removal of the frontupright allows for acomplete access to theinside of the control desk.
5
• The operator panels ofthe main part of the controldesk and the console areequipped with vertical railsfor mounting equipment orsecuring the cables.
• Cross rails can be used toaccommodate the samec o m p o n e n t m o u n t i n gaccessories as those usedfor our standard enclosureranges.
• The closing system uses a5 mm double bar. A widerange of lock combinationsis available in the form ofaccessories.
Two vers ions are avai lable:without back panel or withremovable back panel.
Access to equipment is total andunhindered from the front of thecontrol desk.
Monobloc control desks without consolefor improved flexibility
6
• These control desks areequipped with side cross-rails providing support,depth adjustment and fixingfor the different equipmentm o u n t i n g a c c e s s o r i e st h r o u g h t h e u s e o fperforations at 25 mm pitch.
• Installation of two chassisback-to-back is very easy andprovides space for maximumof equipment.
B-121
B-150
650
B-61/2 B-61/2
764
1024
70
25
93,5 466
B
B-57B-187
270
236
47,5
B-280
B-164
ø12
M8X1812
1
1
66
B-121
B-57
25
93,5
B-150
650
764
1024
60
466
B
B-57B-187
270
236
47,5
B-280
B-164
ø12
M8X1812
1
66
396
377
463
65¡
723
900
31
24,5
19512
6
355
435
479
70
2
1 3
Maximum opening 56 mm
The dimensions of these control desks areidentical to those of the modular controldesks.
7
• An accessoryis available tosupport thescreen.
• Possibility of chassis installation- 1 full height- 2 back-to-back chassis in the lower part- 1 chassis in the base of the lower part- 1 chassis in the console.
These are equipped with a reardoor for total unhindered accessto the equipment.
The console is equipped with ahinged front door.
The 630 mm deep console canaccommodate a 14’’ screen.
Monobloc control desks with consolefor enhanced functionalities
25
80
B-93
B-150
477
650
566
B
299
B-8
B-16/2 B-16/2
B-160
60
236/
436
ø12
M8X1812
B-280
B-164
273/
473
78
1
89
236/
436
273/
473
78
25
80
B-93
B-150
477
650
566
299
B-8
B-8
B
B-160
ø12
1
B-280
B-164
M8X1812
1310
1372
24,5
427/627
845/1045
365/565 31
21
297/497
526
539
480
447
min. 53
max. 278/478
a
min. 143
max.368/568
b
a
b
3
2
4
4
3
2
1
132
482407
390
2
1 3
Maximum opening with gland plate: 56 mm
Maximum opening of the top of the control desk 75°
Maximum opening of the console 65°
Optional upper mounting plate
For 2-door control desk +25 mm
For 2-door control desk –25 mm
Control desks without console
Plinths for control desks without console
Mounting and cross rails
8
Monobloc control desks and accessoriesfor more choice
Note: to order a control desk without mounting plate, remove PM from the reference.
Heavy duty vertical rails:- MOL80 for a height of 800 mm
(control desks without console and lower part of controldesks with console)
- MOL140 for a height of 1400 mm(control desks with full-height console).
Chassis
Width Sheet steel Stainless steel Plain chassis Perforated chassis
Without back With back With backpanel panel panel
600 PK60 - PM PKP60 - PM PKPX60 - PM PMP7060 PMR6760
800 PK80 - PM PKP80 - PM PKPX80 - PM PMP7080 PMR6780
1000 PK100 - PM PKP100 - PM PKPX100 - PM PMP70100 PMR67100
1200 PK120 - PM PKP120 - PM PKPX120 - PM PMP70120 PMR67120
1600 - - -
Control desk Control desk 100 high 200 high 100 high width3depth reference sheet steel plinth sheet steel plinth stainless steel plinth
6003400 PK60 ZUN64/100 ZUN64/200 -
6003500 PKP60 ZUN65/100 ZUN65/200 ZUX 65/100
8003400 PK80 ZUN84/100 ZUN84/200 -
8003500 PKP80 ZUN85/100 ZUN85/200 ZUX85/100
10003400 PK100 ZUN104/100 ZUN104/200 -
10003500 PKP100 ZUN105/100 ZUN105/200 ZUX105/100
12003400 PK120 ZUN124/100 ZUN124/200 -
12003500 PKP120 ZUN125/100 ZUN125/200 ZUX125/100
Control desk
Width Combination Asymmetric Symmetricrail rail rail
600 CDP60 CAON60 CSON60
800 CDP80 CAON80 CSON80
1000 CDP100 CAON100 CSON100
1200 CDP120 CAON120 CSON120
1600 - - -
Control desks with console
Cross-rails and fixing brackets
Plinths for control desks with console
9
* Mounting on two heavy-duty uprightsRef.: MOL140
Note: to order a control desk without mounting plate, remove PM from the reference.
Set of 4 cross-rails and fixing brackets to equip the consoles ofmonobloc control desks with console.
Control desks with console Plain chassis Perforate chassis
Width Sheet steel Lower Console Total Console Lower Console Total*
depth 430 depth 630
600 - - - - - - - -
800 PKP80/F30-PM PKP80/F50-PM PMP7080 PMP4580 PMOL148 PMP4080 PMR6780 PMR4280 PMR6080x2
1000 PKP100/F30-PM PKP100/F50-PM PMP70100 PMP45100 PMOL1410 PMP40100 PMR67100 PMR42100 PMR60100x2
1200 PKP120/F30-PM PKP120/F50-PM PMP70120 PMP45120 PMOL1412 PMP40120 PMR67120 PMR42120 PMR60120x2
1600 PKP160/F30-PM PKP160/F50-PM PMP70160 PMP45160 - PMP40160 - -
Control desk Control desk 100 high 200 highwidth3depth reference steel plinth steel plinth
8003400 PKP80/F30 ZUN84/100 ZUN84/200
8003600 PKP80/F50 ZUN86/100 ZUN86/200
10003400 PKP100/F30 ZUN104/100 ZUN104/200
10003600 PKP100/F50 ZUN106/100 ZUN106/200
12003400 PKP120/F30 ZUN124/100 ZUN124/200
12003600 PKP120/F50 ZUN126/100 ZUN126/200
16003400 PKP160/F30 ZUN164/100 ZUN164/200
16003600 PKP160/F50 ZUN166/100 ZUN166/200
Reference
DFPK - 2030 For control desk console PKP - / F30
DFPK - 4050 For control desk console PKP - / F50
Modular technology for extra freedom
10
The monobloc offer is furtherextended by a modular control deskoffer.
Through a combination of consoles,Himel proposes an enormousnumber of combinations providingyou with the ideal solution.
For each combination, ergonomyand ease of mounting are evenmore in evidence.
B-121
B-150
650
70
764 10
25
B-61/2 B-61/2
25
93,5
597
B
B-57B-187*
79
150 200 165
94,5
336
B-280
B-164
ø12
B-50
1
370
78,5
95,5
M8X1812
1
B-121
B-57
B-150
650
764 10
25
60
25
93,5
B
597
79 24,5
B-57B-187
150200
165
336
B-280
B-164
ø12
B-50
M8X1812
1
370
78,5
95,5
562
750
723
527
min. 45
max. 395
min. 126
max. 476
31
100
831
900
24,5
65¡
19512
6
355
435
479
70
2
1 3
4
• The interconnection betweenconsole and control desk isvia removable plates.
• The console is equipped witha screw-fastened back paneland notched rails in thedeepest version. Equipmentaccess is total.
• The console panel is equippedwith vertical rails for fasterand easier cable fixing andwiring.
Maximum opening 56 mm
B
B-8
53
25
53
25
B-106
325
325
483
200
300
350
387
435
350
387
435
107
2621508
206
361
B-75
B-40
1508
477
536
B-75
B-40*
B-8*
B-106
483
B
Console accessories
11
Width Depth Console Stainless Plain Perforatedconsole console reference steel chassis chassis
400 200 FE42 FEX42 MM44 MR44
400 300 FE43 FEX43 MM44 MR44
600 200 FE62 FEX62 MM64 MR64
600 300 FE63 FEX63 MM64 MR64
CONTROL DESK WIDTH
600
Console FE 42 FE 62
Plates TA 20 -
Lower part PKP 60 PKP 60
800
Console FE 42 2 X FE 42 FE 62
Plates TA 40 - TA 20
Lower part PKP 80 PKP 80 PKP 80
1000
Console FE 42 FE 62 FE 42 + FE 62 FE 62
Plates TA 60 TA 40 - 2 X TA 20
Lower part PKP 100 PKP 100 PKP 100 PKP 100
1200
Console FE 42 FE 42 + FE 62 FE 62 2 X FE 62 FE 62
Plates TA 80 TA 20 TA 60 - TA 20 + TA 40
Lower part PKP 120 PKP 120 PKP 120 PKP 120 PKP 120
The modular offer is also available in stainless steel.
The removable stainless steel gland plates have the following references according to width:TAX200, TAX400, TAX600, TAX800.The same combinations are possible with 300 mm deep console.Ordering example for a control desk 300 mm wide with console depth 600 mm:Console FE43 FE63Plates TA20 -Lower part PKP60 PKP60