SOFLEX
SO flexible
newgeneration
SH SOFT K | SH SOFT K TORICSilicone Hydrogel lens For Keratoconus and Irregular Corneal Cases Fitting By SAG
SOFLEX
new generation
fitting by sag
SOFT K
the most flexible & CORRECT contact lens ever3 month frequent replacement Silicone Hydrogel lensesfor Keratoconus and Irregular Cornea patientsThe SH Soft K II is a unique soft contact lens specially designed to successfully correct the vision of Keratoconus and Irregular Cornea patients without compromising comfort. The unique fitting takes the HVID (Horizontal Visual Iris Diameter)and sagittal height into account, thus ensuring maximum comfort.
Lens Design:The unique base curve has a spherical optic zone with an aspheric periphery. The front curve has a reinforced optic zone which vastly improves vision, a special lenticularzone for structural stability and a very comfortable edge to the lens. A special system incorporatespressure balancing fenestration holes to equalize the pressure between the front and back of the lens, which improves the following:
₧ Optic stability ₧ Oxygen transmissibility ₧ Air bubble elimination ₧ Tear exchange ₧ Centering
The lens is produced using advanced computer controlled diamond turning lathing machinesfor greater accuracy.
Pressure Balancing Holes
Tear Layer
Optical Zone
Distorted Cornea
Structural Stabilized AreaSH
SOFT
K |
SH SO
FT K
TO
RIC
newgeneration
lens material:The SH Soft K II Toric is a Front Toric Prism Ballast lens design that is engraved at 270 o. The material is the Contamac Definitive Silicone Hydrogel, which increases ocular health.
Lens Specifications:Material:Water Content:Handling Tint:Visible Light Transmission:Modulus (MPa):Base Curve:Diameter:Center Thickness:
Filcon V 374 %Clear99.3%0.357.00, 7.30, 7.60, 7.90, 8.20 mm14.20 mm, 14.8 mm0.48 mm @ -3.00DS
Sphere Power:
* Cylinder:* Axis:* Mark:Packaging:
+10.00 to -20.00in -0.25DS stepsUp to -4.50 DSAnyAn engraved line at 2700
Vial
Edge Thickness:Optic Zone: Oxygen Permeability (DK):
0.11 mm8.30 mm@ -3.00DS60.0 x 10 -11 @ 350C
Structural Stabilized area
Soft & Comfortable Riding Edge Design
Contamac Definitive Silicone Hydrogel
Back Optic Zone
Pressure Balancing Holes
ISO 9001
3MONTHS
*only for the SH Soft K II Toric
newgeneration
BC/DIA7.007.307.60 7.90 8.20
14.2052904730437040003770
14.80 ---5500495045504230
fitting instructions:The Trial Set includes: 5 lenses in diameter 14.20: 7.00,7.30, 7.60, 7.90, 8.20 4 lenses in diameter 14.80: 7.30, 7.60, 7.90, 8.20 The Trial set is manufactured from hydrogel 67% water contentEach trial lens is engraved with the first 3 digits of the sag.
please monitor the following steps:1. Patient History report2. Corneal topography / Keratometric readings3. Routine slit lamp eye check4. Lens diameter selection ₧ HVID 10.8 to 12.1 choose 14.20mm ₧ HVID 12.2 to 13.0 choose 14.80mm ₧ Or, use the unique Vertical Measurement Gauge5. First choice Base Curve selection, one of two fitting techniques: a. Sagittal Height Formula ₧ Lens diameter 14.20mm ₧ Sagittal Height at 14.2 corneal diameter + 500 μm ₧ Lens diameter 14.80mm ₧ Sagittal Height at 14.8 corneal diameter +1000 μm b. Keratometric Formula ₧ Kavg +1.0mm (go flatter) 6. First choice trial lens fitting: ₧ Movement between 0.7mm to 1.0 mm ₧ Lens must be centered ₧ Check patient’s comfort ₧ No air bubbles ₧ No edge lift ₧ Acceptable vision with over refraction7. Perform spherical and cylinder over refraction8. Once all of these steps are reviewed and monitored, the lens can be ordered for the patient.
lens care:₧ For ease and comfort, it is highly recommended to wet the lens with saline about 60 seconds before removing from the eye₧ Daily cleaning with all types of cold systems H2O2 is recommended.
THE MOST UNIQUE CONTACT LENS EVER
SOFLEXWWWSOFLEXcontacts.com
MED
I A1®
CRE
ATI
N|