Newtec MDM6000 Satellite Modem (R1.1)
NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
www.newtec.eu
The MDM6000 Satellite Modem is the versatile next generation modem optimised for medium to high speed IP applications over satellite. The MDM6000 modem is typically installed at both ends of a point-to-point satellite link or at the remote sites of a star network. The unit can act as a modulator, demodulator or modem depending on the network configuration and integrates seamlessly with terrestrial IP networks and equipment. The modem is in full compliance with the DVB-S2 standards and supports the S2 Extensions candidates to achieve barrier-breaking efficiency at maximum service availability.
Efficiency at the coreThe Newtec MDM6000 Satellite Modem combines a number of innovative elements to improve current market available efficiencies, thereby lowering the overall Total Cost of Ownership.
New modulation and Forward Error Correction (FEC) codes up to 64APSK 9/10 (which can be seen as demonstrator of possible extensions in the DVB-S2 standard) in combination with innovative technologies such as 72 Mbaud, Clean Channel Technology™, FlexACM®, QOS, and Automated Equalink® pre-distortion are embedded in the modem and bring the satellite link to full efficiency. By increasing the amount of data that can be transferred per transponder the MDM6000 modem effectively increases business opportunities for Service Providers.
Depending on the application, the migration scenario and the activated features the Newtec MDM6000 modem can be used in conjunction with the Newtec HUB6000 Satellite Hub. In all cases end-to-end efficiency over satellite can be achieved. The performance can be increased even more by adding Newtec’s bandwidth cancellation and/or network optimisation technologies such as acceleration, compression, shaping and bandwidth management.
Optimal availabilityNewtec’s auto-adaptive technology FlexACM® is incorporated in the MDM6000 modem and deals with fading conditions (rain, dust, interference) and inclined orbit satellites with varying throughput patterns.
Thanks to FlexACM® these fading conditions will no longer interrupt the transmission between the hub and remote sites nor result in loss of data. The maximum possible throughput can be achieved at all times.
Flexibility and scalability matching market’s business models
The MDM6000 modem provides a scalable and flexible platform which allows the customers to grow depending on their application and investment plan. The platform can start as a modulator or demodulator unit and grow into a modem with different functionalities by simple license upgrades.
At the output of the MDM6000 Modem, the signal is available in IF or extended L-band (950 MHz-2150 MHz). A switchable 10 MHz reference signal for an outdoor BUC is multiplexed on the L-band interface. At the receive site the modem has a dual L-band input or optional IF+L-band input. The active input provides DC power and frequency band selection signals compatible with most professional and commercial LNBs providing a compact and cost effective solution.
The Satellite Modem can be easily monitored and controlled via a comprehensive front panel menu, advanced web GUI as well as via SNMP protocol. This enables easy integration into any industry-standard EMS/NMS system.
Description
The Newtec MDM6000 Satellite Modem is the versatile Next Generation modem that allows service providers and government operations to increase the amount of services or the customer base within the same bandwidth. At the same time it introduces ways to reduce OPEX costs and increase the profitability of your business at maximum efficiency and optimum availability.
Key features
• DVB-S2compliant• CandidateS2ExtensionsandMODCODs• QPSK/8PSK/16APSK/32APSKand64APSK• Baudraterange:1–72Mbaud• Dataratesupto2x155Mbps(stand-alone)and2x380Mbps
in combination with NOP1760 Bandwidth Manager• OptionalFlexACM®foradaptiveenvironments• GSEencapsulation• QualityofService(QoS)• OptionalDCBUCPower
Main advantages
• Highestspeedsandefficienciesavailableinthemarket• Loweroperationalcoststhankstothehighestbandwidthefficiency• Optimalavailabilityeveninfadingconditionsorwithservicesoverinclinedorbitsatellites• BasedonDVB-S2standardsandupcomingS2Extensioncandidatesforbetterefficiency(15-37%dependingonlinkbudget)• CleanChannelTechnology™providesupto15%bandwidthefficiencygainsontopoftheDVB-S2standard• Maximumefficiencyincombinationwithbandwidthcancellationandnetworkoptimisationtechnologies• EasyintegrationwithterrestrialIPnetworksandrouters• QualityofService(QoS)forprioritysettingsandoptimisedtrafficflow
Newtec MDM6000 Satellite Modem (R1.1)
www.newtec.eu
• Noise&DistortionEstimatortool(NoDE)• IF(70MHz/140MHz)andL-Band(950MHz-2150MHz) high power outputs• L-bandmonitoringoutput• ThinMarginManager(ThiMM)tocountersmallvariations• Optionalhighstabilityinternalclockreference• Optional10MHzreferenceoutput• OptionalCleanChannelTechnologyTM
• Optionalautomatedlinear&non-linearEqualink®Pre-distortion• Securefrontpanel,SNMP,HTTPandCLIinterfaces
Architecture
The MDM6000 Satellite Modem can be used at both ends of a point-to-point network or at the remote site of a star network. Depending on the configuration the unit can be used as modulator, demodulator or modem.
Support services for your professional equipment
Care Pack Basic and Care Pack Enhanced are the Newtec service and support packages protecting your Newtec equipment over a three-year period.
@ @
MDM6000 Satellite Modem
BWC0900 Bandwidth Canceller (Option)
MDM6000 Satellite Modem
BWC0900 Bandwidth Canceller (Option)
Ku-, X-, C-band, HTS &Inclined Orbit Satellite
72 MHz transponders (no bandwidth cancellation in this example)
36 MHz 36 MHz
DVB-S2/S2 Extensions FlexACM Outbound
DVB-S2/S2 Extensions FlexACM Return
Figure2:Point-to-MultipointnetworkwithMDM6000inremote Figure2:Point-to-Pointnetworkformedium/(very)highspeeds
Related Products in PtP Network
HUB6000 Satellite HubNOP1760 Bandwidth Manager and ShaperMCD6000 Multicarrier DemodulatorBWC0900 Bandwidth CancellerNOP183x PEPGatewaysNOP184x PEPServersAZ202 Redundancy SwitchAZ7x0 Frequency Converters Portfolio
Z
@BackboneAccess
Remote 1: MDM6000 Satellite Modem
Remote 2: MDM6000 Satellite Modem
Remote 3: MDM6000 Satellite Modem
Remote Network
HUB6000 Satellite Hub
DVB-S2/S2 Extensions
Ku-, Ka-, X-, C-band,Inclined Orbit Satellite
Acceleration and Compression Option
S2/S2 Extensions MultiCarrierDemod
Bandwidth Cancellation Option
72 MHz
DVB-S2/S2 Extensions ACM Outbound
S2/S2 Extensions ACMReturns
36 MHz
Newtec MDM6000 Satellite Modem (R1.1)
NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
NewtecSHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
Input interfaces
• Autoswitching10/100/1000Base-TEthernetinterface• Maximumrates:155Mbit/sineachdirectionor2x380Mbit/s in combination with NOP1760• Layer2bridgemode:Ethernetframesoversatellite• Layer3bridgeorroutermode:IPpacketsoversatellite• Encapsulation:GSEEncapsulationofEthernet/IPframesin DVB-S2&S2Extensions• Decapsulation:GSEDecapsulationofEthernet/IPframesinDVB-S2&S2Extensions• Filteringandroutingcapabilities(uplink) Upto32VLANfilters Up to 20 IP routes/air-MAC addresses Up to 10 DVB-S2/S2 Extensions Streams• Datafiltering(downlink): Up to 64 ISI/AirMAC filters• ProxyARPsupport• QualityofService(QoS)• BBFoverIPinputandoutputinterfacepossibilitiestointerworkwithNOP1760
Modulation and demodulation
Supported modulation schemes and FEC• DVB-S2 Outer/InnerFEC:BCH/LDPC MODCODs:
QPSK: 1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10; 8PSK: 3/5,2/3,3/4,5/6,8/9,9/10; 16APSK: 2/3,3/4,4/5,5/6,8/9,9/10; 32APSK: 3/4,4/5,5/6,8/9,9/10
• S2Extensions: Outer/InnerFEC:BCH/LDPC MODCODs:
QPSK: 45/180,60/180,72/180,80/180,90/180,100/180, 108/180,114/180,120/180,126/180,135/180, 144/180,150/180,160/180,162/180
8PSK: 80/180,90/180,100/180,108/180,114/180, 120/180,126/180,135/180,144/180,150/180
16APSK: 80/180,90/180,100/180,108/180,114/180,120/180, 126/180,135/180,144/180,150/180,160/180,162/180
32APSK: 100/180,108/180,114/180,120/180,126/180, 135/180,144/180,150/180,160/180,162/180
64APSK: 90/180,100/180,108/180,114/180,120/180, 126/180,135/180,144/180,150/180,160/180, 162/180
LinearMODCODs:8PSK-L: 80/180,90/180,100/180,108/180,114/180,120/18016APSK-L: 80/180,190/180,100/180,108/180,114/180, 120/180,126/180,135/180,144/180,150/180, 160/180,162/180
64APSK-L: 90/180,100/180,108/180,114/180,120/180, 126/180,135/180,144/180,6150/180,160/180, 162/180
• FlexACMcontroller(optional)• SupportofDVB-S2VCMmode(demod)• FlexACMclientembeddedinMDM6000modem(optional)
Baud rate rangeModulator: 0,050-72MBaudGrade1Demodulator: 1-60Mbaud(dependingonMODCOD)Grade2Demodulator: 1-72Mbaud
Frame length•DVB-S2ShortFrames 16200bits•DVB-S2NormalFrames 64800bits•S2ExtensionsNormalFrames 64800bits
Roll-off factor•DVB-S2 20%-25%-35%•S2Extensions 5%-10%-15%-20%-25%-35%
Clean Channel TechnologyTM (optional)•Roll-off: 5%-10%-15%-20%-25%-35%•Optimumcarrierspacing•Advancedfiltertechnology
Modulation interfaces
L-band (configuration option)• Connector N(F),50ohms• Frequency 950-2150MHz(10Hzsteps)• Level -35/+7dBm(+/-2dB)• Returnloss >14dB• Switchable10MHzReference• Spuriousperformance Betterthan-65dBc/4kHz@+5dBmoutputleveland>256kBaud Non-signalrelated: <-80dBc@+5dBmoutput
IF-band (configuration option)• Connector BNC(F)-75ohms (intermateable with 50 ohms)• Frequency 50-180MHz(10Hzsteps)• Level -35/+10dBm(±2dB)• Returnloss 50ohms:>14dB 75ohms:>20dB• Spuriousperformance Betterthan-65dBc/4kHz@+5dBmoutputleveland>256kBaud Non-signalrelated:<-80dBc@+5dBmoutput
L-band monitoring • Connector SMA(F),50ohms• Frequency SameasL-Bandoutputfrequency or 1050 MHz in case of IF output option only • Level -45dBm• Returnloss >10dB
10 MHz reference output (optional)• Connector BNC(F),50ohms• Outputlevel +3dBm(+/-2dB)
BUC power (optional)•Max.current:4A•Voltage:24V,48V(switchable)
Demodulation interfaces
Dual L-band input (default)Connector 2 x F-type (F), 75 OhmsReturnloss >7dB(75Ohm–F(F))Level -65/-25dBmFrequency 950 - 2150 MHzAdjacentsignal <(Co+7)dBm/Hzwith Co = signal level density
IF-band input (optional, replaces one L-band input)Connector BNC (F) - 75 ohmsReturnloss >15dBLevel - 55 to -15 dBmFrequency 50-180MHzAdjacentsignal <(Co+7)dBm/Hzwith Co = signal level density
LNB power and controlmax.current 350mA(onselectedIFLinput)voltage 11,5 -14 V (Vertical polarization) 16-19V(Horizontalpolarization)&additional 22 kHz +/- 4KHz (band selection according to universal LNB forAstrasatellites&DiSEqCcommandtransmission)
Internal 10 MHz Reference Frequency
Standard Stability •Stability: +/-2000ppbover0to70°C•Ageing: +/-1000ppb/year
High Stability (Optional)•Stability: +/-50ppbover0to70°C•Ageing: +/-300ppb/year
Very High Stability (Optional)•Stability: +/-2ppbover0to65°C•Ageing: +/-500ppb/10year
Generic
Monitor and control interfaces• WebserverGUI(HTTP)viawebbrowser• Diagnosticsreport,alarmlog(HTTP)• SNMPv2c
Alarm interface• Electricaldualcontactclosurealarmcontacts• Connector9-pinsub-D(F)• Logicalinterfaceandgeneraldevicealarm
Physical
• Height1RU,width:19”,depth51cm,5.8kg• Powersupply:90-130&180-260Vac,105VA,47-63Hz• Temperature -Operational:0°Cto+50°C/+32°Fto+122°F -Storage:-40to+70°C/-40°Fto+158°F• Humidity:5%to85%non-condensing• CElabelandUL(pending)
Figure2:Point-to-Pointnetworkformedium/(very)highspeeds
This brochure is provided for information purposes only. The details contained in this document, including product and feature specifications, are subject to change without notice and shall not bind Newtec in any way.
(*) Selectable via license keyContact your sales representative for details ([email protected]).
Europe North-America South-America Asia-Pacific China MENA
Tel:+3237806500 Tel:+1203323-0042 Tel:+55112092 6220 Tel:+6567772208 Tel:+8610-82318730 Tel:+97143901878
Fax:+3237806549 Fax:+1203323-8406 Fax:+551120933756 Fax:+6567770887 Fax:+8610-82318731 Fax:+97143686768
Ordering Information
Newtec MDM6000 Satellite Modem (R1.1)
Rev. 1/08.2012
Newtec MDM6000 Satellite Modem Release 1.1. Orderingn°Configuration OptionsCategory MDM6000
Select 1 optionMDM6000 Platform MDM6000 Chassis Version 01 HW-01
Select 1 optionMDM6000 Operating SW MDM6000 Major Software version R1.1* MS-10
Select 1 option for modem or demodulator function
Demod HW OptionGrade 1 (S2)* DH-01Grade 2 (S2+S2 Extensions+WideBand) DH-02
Select 1 option
Mod Output Interface
L-Band with switchable 10MHz output (950-2150MHz) OU-00L-Band + 10 MHz + 24Vdc for BUC OU-03L-Band+10MHz+48VdcforBUC OU-04IF(50-80MHz) OU-01IF + L-band with switchable 10MHz output* OU-02
Select 1 option
Internal Clock ReferenceStandard 10 MHz IR-00High Stability 10 MHz IR-01Very High Stability 10 MHz IR-02
Select 1 optionReference Clock Output 10 MHz Reference Output (BNC) RO-01
Select 1 optionDemod Input Interface IF+L-band* IU-01
Select 1 optionDual PSU Dual Main PSU PS-01
Select 1 option
Efficiency Optimization PackageIncludes: -DVB-S2&S2Extensions -QoSL2+L3
OP-01
Select data rate (modem or modulator function)Outbound Rates Rates in Mbps (CCM-VCM)* 1Mbps-380Mbps
Select data rate (modem or demodulator function)Inbound rates Rates in Mbps (CCM-VCM)* 1Mbps-380Mbps
Additional OptionsCategory
Select Required Option
ACMTXAdaptiveModulation&CodingPtPController* Yes/NoRXAdaptiveModulation&CodingClient* Yes/No
Select 1 OptionClean Channel Technology™ CCT in Mbps* Yes/No
Select 1 Option
Automated Equalink® Linear&Non-linearpredistortion* Yes/NoServicesCategory
Select 1 Option
SupportCarePack3Basic GA-08CarePack3Enhanced GA-09