Raise Production Inc.
NextThe
Revolutionin Oil and Gas
The information contained herein must be kept strictly confidential and may not be reproduced or redistributed in any format without the approval of RAISE Production Inc.
The Raise Difference
It is our business to be different; we supply artificial lift technology
to provide the highest level of innovation that will maximize
production, surpass expectations, and be essential in the future of
the oil and gas industry.
Unconventional Solutions to Unconventional Challenges
The contents of this document are the confidential property of Raise Production Inc. The contents herein must not be used, copied or communicated in any form without the express written consent of Raise Production. © 2018 Raise Production Inc.
CHALLENGE: In the new age of horizontal drilling
All artificial lift solutions are landed above the
perforations resulting in poor lifting efficiency.
SOLUTION: Technology designed to place the artificial
lift solutions at the right geometry to maximize reserve
recovery.
The Goal:
Maximum fluid lift efficiency
Equipment longevity
Mitigate steep decline rates
Why Horizontal wells are in trouble
Frac fluid and formation water separate quickly to the “troughs” retarding productivity
Gas rises to the top of the well bore and expands rapidly at lower pressures
Trapped OilFoamy Oil
Result: Disorganized flow from the Hz to the build and vertical sections of the wellbore and low artificial lift efficiency
The contents of this document are the confidential property of Raise Production Inc. The contents herein must not be used, copied or communicated in any form without the express written consent of Raise Production. © 2018 Raise Production Inc.
The unique challenges in horizontal wellbores require innovative solutions.
Raise has a Three (3) Step Solution (Patent PendingPatent PendingPatent PendingPatent Pending)
Divide the well bore into Vertical, Build and Horizontal flow scenarios that
can be controlled.
HARPTM Solution Phase 1
High Angle Pumping Solution
Evolutionary (Commercial)
REALTM Solution Phase 2
Horizontal Separation
Revolutionary (1 Year out)
Revolutionary (Commercial)
HARTTMSolution Phase 3
Increase Inflow & Access “Stranded” Reserves w/ Horizontal Pump Technology
The contents of this document are the confidential property of Raise Production Inc. The contents herein must not be used, copied or communicated in any form without the express written consent of Raise Production. © 2018 Raise Production Inc.
The Raise Difference
46 35
• TVD gain alone is not indicative of good quality fluid at
the pump intake.
• Ensuring quality fluid at the pump intake requires that
fluid is picked up from the bottom of the wellbore.
• Efficient pumping requires slug mitigation, separation
and elevated calm fluid conditions at the pump intake.
• Proper fluid conditions leading to the pump intake
ensures submergence of the pump intake via the
FluidSeeker™
Flow in the Wellbore is the Challenge
Well Decline Rates
Producing Area1st Year
Decline
Canada
Bakken (SK) -66%
Viking -64%
Cardium -63%
Amaranth -60%
Tight Carbonates -67%
United States
Bakken & Three Forks -60%
Eagle Ford -50%
Permian -60%
Significant variability in initial well characteristics:
Sandstones, Shales and Carbonates
Completion technologies
Lateral lengths
Reservoir characteristics
Variability here implies wellbore flow is the challenge
Our experience has proven that reserves are being trapped
A need exists to equalize the drawdown along the horizontal during
production
Preferential Drawdown
Efficient horizontal wellbore production is facilitated
by an equalization of the drawdown along the
wellbore
Conventionally, pumps landed near the heel will not
influence the reservoir much past the heel
A single drawdown point creates preferential
production of the reservoir near the wellbore heel
(un-equalized drawdown)
Solution Gas Drive:
Evolved solution gas in the reservoir (PR less than
PB)
Segregated flow
Drive gas produced at the heel
Why The REALTM System? ((((Patent PendingPatent PendingPatent PendingPatent Pending))))
Paramount Functions of the REALTM system:
Mitigate slugging flow
Induce calmness in the flow at the heel of the well
Permit gravity separation in the wellbore annulus
Isolate the lift system intake
Present the best quality fluid to the pump intake
Return to Equilibrium:
Land the REALTM system below depleted fractures
Access production from deeper in the horizontal
Return reservoir to equilibrium state (crossflow)
Obtain best possible pumping efficiency
With only one dynamic component, simplicity in design and
operation are the keys to success
Thank You!