+ All Categories
Home > Documents > NGN System Overview.ppt

NGN System Overview.ppt

Date post: 08-Nov-2014
Category:
Upload: mahmood-ur-rehman
View: 329 times
Download: 7 times
Share this document with a friend
Description:
an overview of NGN system
Popular Tags:

of 26

Click here to load reader

Transcript

NGN System Overview

www.huawei.com

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

References

U-SYS SoftX3000 Technical Manual-System Description

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page2

Objectives

Upon completion of this course, you will be able to:

Describe the definition of NGN. Outline the NGN architecture and every layers functions. Describe HUAWEI NGN solution U-SYS and network applications.

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page3

Contents1. Definition of NGN 2. NGN System Architecture 3. U-SYS Introduction

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page4

What is NGN

Next Generation Network (NGN) is a service-oriented network.

NGN is a kind of open and integrated network architecture. NGN is a kind of brand-new network integrating voice, data, fax, and video services.

Through the separation of service and call control, as well as call control and bearer, the service-independent architecture is implemented, which makes services independent of network.

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page5

NGN in Broad Sense

NGN in broad sense

SoftSwitchIP

Next Transmission Network ASON

Next Data Network NGI/IPV6

Next Mobile Network 3G

Fixed Network SoftSwitch

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page6

NGN in Narrow SenseSoftSwitch

Packed NetworkVoice Network Data Network

Video Network

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page7

Contents1. Definition of NGN 2. NGN System Architecture 3. U-SYS Introduction

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page8

NGN System ArchitectureService Management

Network Control Core Switch Edge Access

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page9

NGN Network ArchitectureService managementiOSS Application Server MRS SCP Video server

Network control

SoftSwitch

SoftSwitch

Core switching

Packet core network

Edge access

Eudemon

IAD/ MTA

UA

SIP Phone

H.323 Phone

SG

TMG PSTN

UMG

UMG PLMN/3G

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page10

Common Protocols in NGN System

Media Gateway Control Protocol (for IAD,AMG,UA,TMG,UMG):

MGCP H.248

Signaling Transmission Protocol (for CCS,SIGTRAN):

MTPIP TCPUDPSCTPM2UAM3UAIUA

Call Control Protocol (for Trunk ,Multimedia Terminal)

ISUPINAPSIPH.323SIP-T

Application Server Protocol (for AS,OSS)

FTPSIPSNMPMML

Core Switch Layer Protocol (for Router,LanSwitch)

EthernetMPLSTCP/IPOSPF

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page11

Contents1. Definition of NGN 2. NGN System Architecture 3. U-SYS Introduction

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page12

U-SYS Network ArchitectureService LayeriManager OSS N2000

ENIP

IN

MRS6100

Control Layer

SoftX3000

SoftX3000Video GW

Core Switch LayerIAD UA5000 Broadband Access

IP Core

UMG8900 3G Access SG7000

Access Layer

PSTN

UMG8900

UMG8900

PLMN

STP

switch

PSTN

SIP/H.323 U-Path Open Eye Phone

2G Terminal

3G Terminal

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page13

Introduction

As a SoftSwitch product, SoftX3000 is located at the core control layer of NGN scheme.

SoftX3000 acts as a generic Call Controller in the packetswitched network, supports the interworking between PSTN, H.323, SIP, and MGCP domains.

SoftX3000 provides H.248 and MGCP based bearer control. In the NGN solution of Huawei, SoftX3000 acts as the core

of NGN, interworking with other NGN components throughthe open network adopting distributed standard protocols.

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page14

U-SYS NGN Application

Packet Multimedia End Office Tandem/Toll office Smart Network Dual Home Networking Inter-working with H.323 Network Interworking with SIP Network

Inter-working with 3G multimedia networkInter-working with IN

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page15

Packet Multimedia End OfficeSoftX3000 (End office)

trunk PSTN / PLMN ISUP UMG8900

IP

SIP/SIP-T trunk Other NGN s

MGCP/H.248

MGCP/H.248 SIP/H.323

AMG5000 U-Path xDSL IAD IAD

Eudemon SIP OpenEye H.323 OpenEye

POTS POTS PC POTS POTS POTS PC

VP8220 IP private network

SIP video terminal

Corporate subscriber access mode Decentralized subscriber access mode Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Multimedia subscriber access modePage16

Tandem/Toll officeSoftX3000

MAN/Backbone network SS7 signaling network MTP M3UA IP H.248/ M2UA UMG8900 MTP ISUP trunk ISUP trunk

H.248/ M2UA

ISUP trunk Other C4 office or toll office

UMG8900

SG7000

ISUP trunk

C5 office

C5 office

C5 officePage17

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Smart NetworkAPP Server SCP MRS

IN service center

INAP/SIP SHLR SHLR

Subscriber data center

MAP

SoftX3000

SoftX3000

Service switching center

UMG8900

UMG8900

LE

LE

LE

LE

LE

LE

End office layer of local network

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page18

Dual Home NetworkingSoftX3000(A)

Packet Network

SoftX3000(B)ALARM

SG7000

iManager N2000

IN

UMG8900(A)STP

UMG8900(B)

switchPSTN(A)

STP

switchPSTN(B)

SoftX3000(A),UMG8900(A) and SG7000 work in area A. SoftX3000(B) and UMG8900 (B) work in area B. UMG8900(A)/ UMG8900(B)/SG7000 will register to Softx3000B) when Softx3000A) is unreachable.Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved. Page19

Inter-working with H.323 Network

SoftX3000

GK

MAN

H.323 trunk

Backbone network

H.323 trunk

H.323 network

SIP Phone AMG TMG

H.323 Phone

H.323 Phone

H.323 GW

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page20

Interworking with SIP NetworkR

WMC

WWW Server

SMC

Store Server

SIP Application Server SIP

SoftX3000

MAN

AMG

TMG

SIP Phone

H.323 Phone

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page21

Inter-working with 3G multimedia networkVIG SoftX3000

RAS/Q.931/H.245 H.248 UMTS H.324 UMG8900 UMG8900 H.323 video terminal NGN core network

H.324 video terminal

RAS H.323 network

Q.931/H.245

3G

GK

H.323 video terminal

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page22

Inter-working with INSS7 signaling network MTP SG7000 M3UA M3UA SoftX3000 INAP over IP IP backbone network INAP over IP MTP

M3UA SCP

IN Network

MAN

SIP Phone AMG TMG

H.323 Phone

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page23

Commercial Networking ExampleiManager N2000 MRS6000 SoftX3000 Application server MCU TMG8010 E1 PSTN

3026

3026

Equipment in the central office

FE

3026

IP MAN FE Access devices 3026 U-PATH 3026 FE 3026 3026 Telecom Intranet AMG5000 AMG5000 Firewall

Fax

POTS

ephone

Video Internet accessSoftPhone

WLAN Video terminal terminal

AMG access

UniPhone

Message Video terminal conference IAD access terminal

U-PATH console

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page24

Summary

This course introduces NGN system four layers: access layer, transport layer, control layer and service layer.

SoftX3000 is the core control equipment in Huawei NGN solution U-SYS.

Copyright 2008 Huawei Technologies Co., Ltd. All rights reserved.

Page25

Thank youwww.huawei.com


Recommended