NH3 (R-717)VERDICHTERVENTILE | ANLAGENVENTILE | FAS PRODUKTE | ZUBEHÖR[COMPRESSOR VALVES | LINE VALVES | FAS PRODUCTS | ACCESSORIES]
02 NH3 (R-717)
1 Verdichterventile [Compressor valves] .................................................................................................................071.1 Rotalockventil – Edelstahl – Serie 267 [Rotalock valve – stainless steel – series 267] .......................................................................................................081.2 Gussabsperrventil DN32 – Set [Cast iron shutoff valve DN32 – set] ...............................................................................................................................091.3 Gussabsperrventil DN40 – DN100 [Cast iron shutoff valve DN40 – DN100] .....................................................................................................................101.4 Gussabsperrventil DN40 – DN100 – Set [Cast iron shutoff valve DN40 – DN100 – set] ........................................................................................................11
2 Anlagenventile [Line valves] ............................................................................................................................................122.1 Industrieventil – Serie 880 [Industrial valve – series 880] ..............................................................................................................................................132.2 Rotalockventil – Edelstahl – Serie 267 [Rotalock valve – stainless steel – series 267] .......................................................................................................142.3 Eckventil mit lösbaren Stumpfschweißanschlüssen – Serie 267 [Angle valve with detachable butt weld connections – series 267] .........................................................152.4 Eckventil mit Stumpfschweißanschlüssen – Edelstahl – Serie 268 [Angle valve with butt weld connection – stainless steel – series 268] ................................................162.5 Füllventil mit Stumpfschweißanschluss – Edelstahl – Serie 263 [Charging valve with butt weld connection – stainless steel – series 263] ........................................172.6 Wechselventil mit NPTF-Anschlüssen – Edelstahl [Change-over valve with NPTF-connections – stainless steel] .....................................................................18 2.7 Absperrventil mit Schweißanschlüssen – Edelstahl – Serie 881-0 [Shutoff valve with welding connections - stainless steel – series 881-0] ..........................................192.8 Rückschlagventile dämpfend (RDL/RDS ) – Edelstahl – Serie 882 [Check valves damping (RDL/RDS) - stainless steel - series 882] ...........................................................20
3 FAS Produkte [FAS products] .........................................................................................................................................213.1 Absperrventile mit festen Anschlüssen (HDSK/ HESK) [Shutoff valves with permanent connections (HDSK/ HESK)] .....................................................................223.2 Absperrventile mit lösbaren Anschlüssen (HDK/ HEK) [Shutoff valves with detachable connections (HDK/ HEK)] ...........................................................................233.3 Rückschlagventile mit festen Anschlüssen (RVS/ RES) [Check valves with permanent connections (RVS/ RES)] ...............................................................................24
3.4 Rückschlagventile mit lösbaren Anschlüssen (RV/ RVE) [Check valves with detachable connections (RV/ RVE)] ..................................................................................253.5 Absperrbare Rückschlagventile mit festen Anschlüssen (RVHS/ REHS) [Shutoff check valves with permanent connections (RVHS/ REHS)] ......................................................26
4 Zubehör [Accessories] ..........................................................................................................................................................274.1 Filter mit Schweißanschlüssen – Edelstahl/ Stahlguss [Strainer with welding connections – stainless steel/ steel casting] .....................................................284.2 Rotalock Schweißnippel – Set [Rotalock welding nipple – set] ...........................................................................................................................................294.3 Schaugläser – Flüssigkeitsstandanzeiger – metrisches Gewinde [Sight glasses – liquid level indicator – metric thread] ......................................................................................304.4 Schaugläser – Flüssigkeitsstandanzeiger – NPTF-Gewinde [Sight glasses – liquid level indicator – NPTF-thread] ........................................................................................314.5 Schaugläser – Flüssigkeitsstandanzeiger – Rotalock [Sight glasses – liquid level indicator – Rotalock] ...............................................................................................324.6 Durchgangsschaugläser mit Schweiß-/ Lötanschlüssen – Edelstahl [In-line sight glasses with welding/ solder connections – stainless steel] ........................................334.7 Spindelschutzkappen – Aluminium – Set [Spindle protection cap – aluminium – set] ...............................................................................................................34
INHALTSVERZEICHNIS [TABLE OF CONTENTS]
NH3 (R-717) 03
✓ Unabhängige Produktprüfung und Bestätigung der Sicherheitsanforderungen durch Underwriters Laboratories.
[Independent examination and confirmation of safety requirements by Underwriters Laboratories.]
✓ Erfüllt RoHS Anforderungen nach 2011/65/EU ohne Anwendung der noch gültigen Ausnahmeregelungen
[Conform with RoHS requirements according to 2011/65/EU without application of the exemptions still in force]
✓ Keine Demontage bei Komponenteninstallation erforderlich [No need to dismount for installation on site]
✓ Reparatursatz/Dichtungssatz erhältlich [Repair set/gaskets available]
✓ Weitere Anschlüsse, Serviceanschlüsse und Abmessungen verfügbar [Further connections, service ports and dimensions available]
✓ Zulassung für alle natürlichen Kältemittel und Standardkältemittel [Approval for all natural refrigerants and standard refrigerants]
✓ Aufwertung durch Weiterentwicklung der Einsatzgrenzen erfolgt [Upgrading through advancement of operational limits done]
✓ Wellrohrabdichtung zur einfachen Spindelbetätigung [Bellow seal for easy operation of spindle]
✓ Geläppte und polierte Metalldichtung [lapped and polished metal seal]
LEGENDE [LEGEND]
04 NH3 (R-717)
MODULARE CONNECTOR SYSTEM
AWA ROTALOCKVERBINDUNG [AWA ROTALOCK CONNECTION]Gewindeverbindung mit PTFE Ring als Dichtelement[Thread connection with PTFE ring for sealing]RLM = Anschluss mit Außengewinde [male connection]RLF = Anschluss mit Innengewinde [female connection]
NPTF VERBINDUNG [NPTF THREAD CONNECTION]Gewindeverbindung durch NPTF [Thread connection by NPTF]AG-NPTF = Anschluss mit Außengewinde [male connection]IG-NPTF = Anschluss mit Innengewinde [female connection]
BÖRDELVERBINDUNG [FLARE CONNECTION]Gewindeverbindung nach dem Bördelprinzip mit 90° Konus[Thread connection according to flare principle with 90° cone]SAEM = Anschluss mit Außengewinde [male connection]SAEF = Anschluss mit Innengewinde [female connection]
G-GEWINDEVERBINDUNG [G THREAD CONNECTION]Gewindeverbindung durch G [thread connection by G]AG G = Anschluss mit Außengewinde [male connection]IG G = Anschluss mit Innengewinde [female connection]
LÖTVERBINDUNG [SOLDER CONNECTION]Dauerhafte Hartlötverbindung [Permanent braze joint]ODS = Lötanschluss zum Einstecken eines Rohres[ODS = braze connector to insert the tube]
STUMPFSCHWEISSENDE ANSCHLUSS WB(U) [BUTT WELD CONNECTION]Dauerhafte Schweißverbindung [Permanent welding connection]WB = Stumpfschweißanschluss [WB = butt weld connector]WBU = Stumpfschweißanschluss mit Ultraschallprüfmöglichkeit[WBU = butt weld connector for ultrasonic inspection]
EINSTECKSCHWEISSENDE ANSCHLUSS WS [SOCKET WELD CONNECTION]Dauerhafte Schweißverbindung [Permanent welding connection]WS = Einsteckschweißanschluss[WS = welding connection to insert the tube]
FLANSCH-VERBINDUNG [FLANGE CONNECTION]Oval- oder Rechteckflansch; Dichtfläche mit Faser- oder Metallsickendichtung [oval or rectangular flange; sealing surface with fibre or metal bead gasket]oval = F35 bis F70 [oval = F35 to F70]rechteckig = F40 x 40 bis F 70 x 70 [square = F40 x 40 to F 70 x 70]
Klemm-/ Schneidringverbindung [clamping / cutting ring connection]Type: CES, CEL, Swagelok und Hy-LokStutzen mit Außengewinde, Überwurfmutter; Klemm-/Schneidring[Connector with male thread, union nut; clamping/ cutting ring]
Unser Baukastensystem für Ihre Anschlussverbindungen bei Stahl-, Edelstahl und Gussventilen mit metrischen und zölligen Verbindungen[Our modular system for your steel, stainless steel and cast iron valve connections with metric and imperial connections.]
NH3 (R-717) 5
Leistungsfähige und innovative Kühlsysteme sind unverzichtbar bei Transport und Lagerung von temperatursensiblen Gütern – beispielsweise Lebensmitteln oder Medikamenten. Deshalb stellt das Armaturenwerk Altenburg (AWA) höchste Ansprüche an jede einzelne Komponente. Wir bieten unseren Kunden ein umfangreiches und fortschrittliches Produktportfolio aus Armaturen, Serviceventilen, Schaugläsern, Adaptern und weiteren Komponenten. Mehr als 135 Jahre Erfahrung, Flexibilität und der Einsatz neuester Technologien – das sind unsere Stärken. Rund um den Globus vertrauen die Marktführer der Kälte- und Klimatechnikbranche auf die Präzision und Qualität der Produkte von AWA.
Unsere Produkte sind Made in Germany
Efficient and innovative cooling systems are indispensable when it comes to transport and storage of temperature-sensitive goods such as foods or medicine. Therefore, Armaturenwerk Altenburg (AWA) demands highest standards of each individual component. We offer a broad and advanced range of products comprising fittings, service valves, sight glasses, adapters and other components. More than 135 years of experience, flexibility and latest technologies are our strengths. Market leaders of the air conditioning and refrigeration sector from around the world rely on the precision and quality of products from AWA.
Our products are Made in Germany
✓ PED 2014/68/EU
✓ DIN EN 12284
✓ DIN EN 378
✓ DIN EN 10204
✓ DIN 8964
✓ DIN EN ISO 9001
✓ DIN EN ISO 14001
✓ DIN EN ISO 50001
PERFEKTION IST UNSER ANSPRUCH[PERFECTION IS OUR MISSION]
Alles unter Kontrolle: unsere Ammoniak-LösungenPerfekt aufeinander abgestimmt – unsere Ventile und Zubehörteile machen Ihre Anlage komplett. Und sorgen für die entscheidende Sicherheit: Heraus-forderung beim Einsatz von Ammoniak ist dessen leichte Entflammbarkeit und Toxizität. Wir bieten Ihnen speziell für den Einsatz von Ammoniak bestimmte Systemkomponenten, die den hier erforderlichen Sicherheits-maßnahmen Rechnung tragen: Prüfverfahren, Fertigungsverfahren und Werkstoffauswahl erfolgen jeweils kältemittelspezifisch. Dabei sind unsere Ammoniak-Armaturen und Zubehörteile kompakt und überzeugen durch ihre einfache Handhabung sowie Langlebigkeit und Anwenderfreundlichkeit.
Nähere technische Informationen zu den zugelassenen Einsatzbedingungen und der sachgemäßen Verwendung entnehmen Sie bitte unseren Betriebs-anleitungen auf unsere Internetseite www.awa-armaturenwerk.de.
Ihre Planung unterstützen wir sehr gerne mit unseren technischen Daten-blättern mit detaillierten Anschlussmaßen und weiteren Parametern.
Everything under control: our ammonia solutions Perfectly matched to each other – our valves and accessories make your system complete and provide for the safety you need: challenges when using ammonia are its high inflammability and toxicity. We offer system components specially designed for ammonia applications that take into account the necessary safety measures: test methods, manufacturing processes and material are chosen according to the refrigerant to be used. Our ammonia valves and accessories are of compact design and convince by their convenient handling as well as durability and user friendliness.
For more information on the approved operating conditions and proper use see the operating instructions on our website www.awa-armaturenwerk.de.
We would be glad to assist your planning process with our datasheets giving detailed connecting dimensions and other parameters.
NH3 (R-717)
NH3 (R-717) 07
Umfangreiches Angebot: Bei uns finden Kunden ein großes Sortiment und zahlreiche Ventiltypen, die speziell für den Anschluss an Verdichter nahezu aller Kältemittel entwickelt wurden. Auch für Ammoniak-Anwen-dungen haben wir die richtigen Produkte, denn unsere Lösungen sind so vielfältig wie Ihre Anforderungen. Unsere Vierkant-Edelstahl-Armaturen beispielsweise haben eine dreifache Abdichtung aus Spindelrückdichtung, Stopfbuchsabdichtung sowie Aluminium-Spindelschutzkappe mit Dichtring und Entlastungsbohrung. Auch unsere Vierkant-Edelstahleckventile liefern wir, ebenso wie unsere Gussventile, mit Spindelrückdichtung und Stopfbuchsabdichtung.
Durch zertifizierte Schweißverfahren fügen wir die Einzelteile zu einem hochfesten Ventil für Ammoniak-Anwendungen zusammen und erreichen damit besondere Betriebssicherheit. Große Flexibilität bieten unsere Verdichterventile aufgrund unseres Baukastensystems mit Schweiß- und Gewindeanschlüssen. Serviceanschlüsse sind absperrbar und nicht-absperrbar erhältlich. Das sind unsere Stärken für Ihre Ammoniak-Lösungen.
Large range: Customers can find a large range and various valve types specially designed for connection to compressors for almost all refrigerants. Even for ammonia applications we have the right products because our solutions are as versatile as your requirements. Our square-type stainless steel valves, for example, have got a threefold sealing consisting of back seat, packing gland and aluminium spindle cap with seal ring and pressure relief hole. Our square-type stainless steel angle valves also come with back seat and packing gland as do our cast valves.
By certified welding techniques we put together individual components to become high-strength valves for ammonia applications and thus reach optimum operational safety. Great flexibility is provided by our compressor valves because of our modular system featuring welded and threaded connections. Service ports are available as lockable and un-lockable types. This is our solution to your ammonia application.
1 VERDICHTERVENTILE [COMPRESSOR VALVES]
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
1.1 ROTALOCKVENTIL – EDELSTAHL – SERIE 267 [ROTALOCK VALVE – STAINLESS STEEL – SERIES 267]
08 VERDICHTERVENTILE [COMPRESSOR VALVES] NH3 (R-717)
✓ Zubehör S. 29 [Accessories p. 29]
✓
Hetested
Made in Germany
✓ 100%
-40 °C-40 °F
Edelstahl [stainless steel]
+140 °C+284 °F
63 bar914 psi
Part Number RLMinch
RLFinch
D1mm
D2mm
L1mm
L2mm
L3mm
Kv m3/h
267 010 000 1 1/4 1 1/4 19 19 129 42 36,5 12
267 020 000 1 3/4 1 3/4 26 29 168 49,5 44,5 27
267 030 000 2 1/4 2 1/4 37 37 182 60 53,5 48
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717NH3 (R-717) VERDICHTERVENTILE [COMPRESSOR VALVES] 09
1.2 GUSSABSPERRVENTIL DN32 – SET [CAST IRON SHUTOFF VALVE DN32 – SET]
Part Numberwith steel bush
Wmm
ODSmm [inch]
D1mm
D2mm
L1mm
L2mm
L3mm
L4mm
L5mm
Kv
m3/h
712 061 000 27 22 [7/8] 32 11 185 64,5 16 66 32 14
712 062 000 33 [1 1/8] 32 11 185 64,5 20 66 32 22
712 063 000 39 35 [1 3/8] 32 11 185 64,5 25 66 32 22
L1
D1L2
L5
OD
S
W
L3
Service-port, lockable1/8" NPTF with Plug
Service-port, not lockable1/8" NPTF with Plug
2x D2
L4
✓ 100%✓ Made in Germany
Hetested
✓ Set = Ventil + Flansch + Schweiß-/Lötbuchse + Dichtung + Schrauben [Set = valve + flange + welding/solder bush + gasket + screws]
-40 °C-40 °F
Guss, grundiert [cast iron, primed]
-10 °C+14 °F
+140 °C+284 °F
21 bar305 psi
28 bar406 psi
(optional)
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
1.3 GUSSABSPERRVENTIL DN40 - DN100 [CAST IRON SHUTOFF VALVE DN40 - DN100]
10 VERDICHTERVENTILE [COMPRESSOR VALVES] NH3 (R-717)
✓ Zink-Beschichtung auf Anfrage [Zinc coating upon request]✓ Zölliges Gewinde für D7 auf Anfrage [Inch-thread for D7 upon request]
✓ 100%✓
Hetested
Made in Germany
-40 °C-40 °F
Guss, grundiert [cast iron, primed]
-20 °C-4 °F
+140 °C+284 °F
26 bar377 psi
35 bar508 psi
Valve type Part Number D1mm
D2mm
D3mm
D4mm
D5mm
D6mm
D7mm
L1mm
L2mm
L3mm
L4mm
L5mm
L6mm
Kv
m3/h
DN40 712 000 000 54 70 37 37 53 13,5 M12 212 72 46 64 53 4 50
DN50 712 010 000 60 75 50 59 76 18 M16 258 80 61 78 78 3 72
DN50-2 712 020 000 64,3 81,7 50 59 76 18 M16 258 80 62 78 78 3 72
DN80 722 030 060 85,1 105,6 78 84,2 106 17 M18 326 100 77 99 97 3 194
DN100 722 040 000 111,4 130 110 110 130,7 21 M20 374 115 93 122 122 3 340
4x D
7
L5
L54x D6
L4
L4
L1
D1
L2
L3
D2
D3
D4
D5
L6
Service-port, lockable1/4" NPTF with Plug
Service-port, not lockable1/4" NPTF with Plug(optional)
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717NH3 (R-717) VERDICHTERVENTILE [COMPRESSOR VALVES] 11
1.4 GUSSABSPERRVENTIL DN40 – DN100 – SET [CAST IRON SHUTOFF VALVE DN40 – DN100 – SET]
Valve type Part Number WBmm
D1mm
D2mm
D3mm
D4mm
L1mm
L2mm
L3mm
L4mm
DN40 791 001 000 48,3 43 54 70 13,5 255 115 46 64
DN50 791 002 000 60,3 54 60 75 18 302 125 61 78
DN50-2 791 003 000 60,3 54 64,3 81,7 18 302 125 62 78
DN80 791 004 000 76,1 70 85,1 105,6 17 381 155 77 96,8
DN80 791 005 000 88,9 82 85,1 105,6 17 381 155 77 96,8
DN100 791 006 000 114,3 106,5 111,4 130 21 434 182 93 122
✓ 100%✓ Made in Germany
Hetested
✓ Zink-Beschichtung auf Anfrage [Zinc coating upon request]✓ Set = Ventil + Flansch + Schweiß-/Lötbuchse + Dichtung + Schrauben [Set = valve + flange + welding/solder bush + gasket + screws]
-40 °C-40 °F
Guss, grundiert [cast iron, primed]
-20 °C-4 °F
+140 °C+284 °F
26 bar377 psi
35 bar508 psi
12 NH3 (R-717)
Optimaler Arbeitsdruck: Mit unseren AWA-Anlagenventilen für Ammoniak-Anwendungen kann Ihre Anlage immer mit optimalem Druck arbeiten. Dafür besitzen beispielsweise unsere Vierkant-Edelstahl- Armaturen eine dreifache Abdichtung: Spindelrückdichtung, Stopfbuchs-abdichtung, Aluminium-Spindelschutzkappe mit Dichtring und Entlastungs-bohrung sorgen für besonderen Schutz. Die einzelnen Ventilteile haben wir dabei mit hochfesten Schweißverbindungen zusammengefügt. Unterschiedliche Kombinationsvarianten an Saug- und Druckseite sowie ein hoher Maximal-druck machen sie flexibel und geeignet für nahezu jede Anlage.
Dank unseres Baukastensystems für Schweiß- und Gewindeanschlüsse lassen sich Anlagenteile oder Rohre flexibel und absperrbar immer passend mit unseren Anlagenventilen für Ammoniak-Anwendungen verbinden. Serviceanschlüsse sind bei uns als absperrbare oder nichtabsperrbare Varianten erhältlich.
Optimum operating pressure: The AWA system valves for ammonia applications ensure your system to constantly operate at optimum pressure. Special protection is provided, for example, by our square-type stainless steel valves coming with a threefold sealing: back seat, packing gland, aluminium spindle cap with seal ring and pressure-relief hole. The individual valves are fitted together by high-strength welded connections. Different combinations on the suction and discharge side and a high maximum pressure make them flexible and suitable for almost every system.
Our modular system for welded and threaded connections makes it possible to connect the system parts or pipes in a flexible manner und isolatable and always matching with our system valves for ammonia applications. Service ports are available both as lockable and un-lockable types.
2 ANLAGENVENTILE [LINE VALVES]
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717NH3 (R-717) ANLAGENVENTILE [LINE VALVES] 13
2.1 INDUSTRIEVENTIL – SERIE 880 [INDUSTRIAL VALVE – SERIES 880]
✓ 100%✓
Hetested
Made in Germany
-40 °C-40 °F
-60 °C-76 °F
Stahlguss, grundiert [steel casting, primed]
+150 °C+302 °F
63 bar914 psi
47 bar682 psi
Part Number DN
WBmm
L1mm
L2mm
Kv
m3/h
880 001 000 40 48,3 296 62 52
880 002 000 50 60,3 308 67 78
880 003 000 65 76,1 329 72 150
880 004 000 80 88,9 389 90 193
880 005 000 100 114,3 437 116 340
880 006 000 125 139,4 565 150 530
880 007 000 150 168,3 612 170 790
880 008 000 200 219,1 742 190 1390
WB
L2
WB
L2
L1
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
2.2 ROTALOCKVENTIL – EDELSTAHL – SERIE 267 [ROTALOCK VALVE – STAINLESS STEEL – SERIES 267]
14 ANLAGENVENTILE [LINE VALVES] NH3 (R-717)
✓ 100%✓
Hetested
Made in Germany
-40 °C-40 °F
Edelstahl [stainless steel]
+140 °C+284 °F
63 bar914 psi
Part Number RLMinch
RLFinch
D1mm
D2mm
L1mm
L2mm
L3mm
Kv
m3/h
267 010 000 1 1/4 1 1/4 19 19 129 42 36,5 12
267 020 000 1 3/4 1 3/4 26 29 168 49,5 44,5 27
267 030 000 2 1/4 2 1/4 37 37 182 60 53,5 48
✓ Zubehör S. 29 [Accessories p. 29]
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717NH3 (R-717) ANLAGENVENTILE [LINE VALVES] 15
2.3 ECKVENTIL MIT LÖSBAREN STUMPFSCHWEISSANSCHLÜSSEN – SERIE 267 [ANGLE VALVE WITH DETACHABLE BUTT WELD CONNECTIONS – SERIES 267]
✓ 100%✓
Hetested
Made in Germany
-40 °C-40 °F
Edelstahl [stainless steel]
+140 °C+284 °F
63 bar914 psi
Part Number WBmm
DNmm
NPSinch
RLinch
L1mm
L2mm
L3mm
Kv m3/h
267 060 100 13,5 08 1/4 3/4 138 36,5 68 2,2
267 070 100 17,2 10 3/8 1 150 40 80 3,8
267 080 100 21,3 20 1/2 1 1/4 169 42 82 8,0
267 090 100 26,9 20 3/4 1 1/4 164 42 77 12
267 100 100 33,7 25 1 1 3/4 223 55 100 28
267 110 100 42,4 40 1 1/4 2 1/4 227 60 105 42
267 120 100 48,3 40 1 1/2 2 1/4 227 60 105 50
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-71716 ANLAGENVENTILE [LINE VALVES] NH3 (R-717)
2.4 ECKVENTIL MIT STUMPFSCHWEISSANSCHLÜSSEN – EDELSTAHL – SERIE 268 [ANGLE VALVE WITH BUTT WELD CONNECTIONS – STAINLESS STEEL – SERIES 268]
✓ 100%✓
Hetested
Made in Germany
Part Number WB mm
DNmm
NPSinch
D1mm
L1mm
L2mm
Kv m3/h
268 010 000 13,5 08 1/4 8,5 130 60 2,4
268 020 000 17,2 10 3/8 12 130 60 4,4
268 030 000 21,3 15 1/2 16 147 60 9
268 040 000 26,9 20 3/4 21 179 60 16
268 050 000 33,7 25 1 27 189 70 27
268 060 000 42,4 32 1 1/4 35 203 80 45
268 070 000 48,3 40 1 1/2 43 203 80 50
-40 °C-40 °F
Edelstahl [stainless steel]
+140 °C+284 °F
63 bar914 psi
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717NH3 (R-717) ANLAGENVENTILE [LINE VALVES] 17
2.5 FÜLLVENTIL MIT STUMPFSCHWEISSANSCHLUSS – EDELSTAHL – SERIE 263 [CHARGING VALVE WITH BUTT WELD CONNECTION – STAINLESS STEEL – SERIES 263]
✓ 100%✓
Hetested
Made in Germany
-60 °C-76 °F
Edelstahl [stainless steel]
+140 °C+284 °F
63 bar914 psi
Part Number WBmm
Wmm
DNmm
NPSinch
AG Ginch
D1mm
D2mm
L1mm
L2mm
L3mm
Kv m3/h
263 110 000 13,5 08 1/4 1/2 8,5 10 130 60 50 2,1
263 111 000 13,5 08 1/4 1/2 8,5 10 200 130 50 2,1
263 112 000 17,2 10 3/8 1/2 12 10 130 60 50 2,8
263 113 000 17,2 10 3/8 1/2 12 10 200 130 50 2,8
263 010 000 18 10 3/8 1/2 12 10 117 47 50 3,2
263 101 000 18 10 3/8 1/2 12 10 150 80 50 3,2
263 102 000 18 10 3/8 1/2 12 10 190 120 50 3,2
263 114 000 21,3 15 1/2 1/2 16 10 130 60 50 3,0
263 115 000 21,3 15 1/2 1/2 16 10 200 130 50 3,0
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
✓ 100%✓
Hetested
Made in Germany
18 ANLAGENVENTILE [LINE VALVES] NH3 (R-717)
2.6 WECHSELVENTIL MIT NPTF-ANSCHLÜSSEN – EDELSTAHL [CHANGE-OVER VALVE WITH NPTF-CONNECTIONS – STAINLESS STEEL]
-60 °C-76 °F
Edelstahl [stainless steel]
+140 °C+284 °F
63 bar914 psi
✓ Ausrichtbare Anschlüsse auf Anfrage [Alignable connections upon request]
Part Number AG NPTFinch
IG NPTFinch
D1mm
D2mm
L1mm
L2mm
L3mm
L4mm
L5mm
Kv
m3/h
246 504 000 1/2 1/2 13,5 13,5 162 69,5 55 52,5 70 4,3
246 506 000 1/2 1/2 13,5 13,5 192 99,5 55 52,5 100 4,3
249 501 00 1 1 23 28 284 133 67,5 62,5 150 13
249 502 000 1 1/4 1 1/4 28 28 289 133 77,5 67,5 150 16
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717NH3 (R-717) ANLAGENVENTILE [LINE VALVES] 19
2.7 ABSPERRVENTIL MIT SCHWEISSANSCHLÜSSEN – EDELSTAHL – SERIE 881 [SHUTOFF VALVE WITH WELDING CONNECTIONS – STAINLESS STEEL – SERIES 881]
Part Number WBmm
DNmm
D1mm
L1mm
L2mm
L3mm
L4mm
Kv m3/h
881 001 000 10,2 6 5,5 60 74 11 32,5 0,4
881 003 000 13,5 8 5,5 90 90 19 45 1,4
881 005 000 17,2 10 5,5 90 90 19 45 2,1
881 008 000 21,3 15 6 100 120,5 20 56 3,9
881 010 000 26,9 20 6,5 136 128 24,5 65 6,6
Edelstahl [stainless steel]
-60 °C-76 °F
+150 °C+302 °F
63 bar914 psi
✓ 100%✓
Hetested
Made in Germany
✓ Erweiterter Druckbereich auf Anfrage [Extended pressure range upon request]
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-71720 ANLAGENVENTILE [LINE VALVES] NH3 (R-717)
2.8 RÜCKSCHLAGVENTILE DÄMPFEND (RDL/ RDS) – EDELSTAHL – SERIE 882 [CHECK VALVES DAMPING (RDL/ RDS) – STAINLESS STEEL – SERIES 882]
63 bar914 psi
140 bar2030 psi
✓ 100%✓
Hetested
Made in Germany
✓ Öffnungsdifferenzdruck 0,03 bar (0,4 psi) [Opening pressure differen- tial 0,03 bar (0,4 psi)]
Edelstahl [stainless steel]
+140 °C+284 °F
-60 °C-76 °F
L1
D1
WB
WB
L1
L2
OD
S
OD
SW W
L2
Part Number W mm
ODSmm [inch]
WB mm
DN mm
D1mm
L1mm
L2mm
KVm3/h
PS bar
882 201 000 13,5 [3/8] - 10 30 133 9 2,3 140
882 202 000 17,2 [½] - 10 30 133 9 3,8 140
882 203 000 22 16 [5/8] - 10 30 133 11 4,5 140
882 411 000 - - 88,9 80 139,7 252 - 141 63
NH3 (R-717) 21
Marke mit Profil: Die Marke FAS setzt eigene Akzente. Eines der Highlights ist das kombinierte Rückschlag- und Absperrventil, mit dem sich Kälte-mittelmassenströme regulieren lassen, um Kälteanlagen zu optimieren. Dank der vielen Anschlussvarianten wie Schweiß- und Flanschanschluss sind sie sehr flexibel einsetzbar.
Dabei ist Qualität stets unser oberstes Gebot. Unsere Durchgangs- und Eckabsperrventile sind in Edelstahl oder Guss mit Spindelrückdichtungen sowie Stopfbuchs- oder Wellrohrabdichtung gefertigt. Rückschlagventile werden mit doppelter Dämpfung geliefert.
Brand with an edge: The FAS brand sets its own priorities. One of the highlights is the combined check valve and shut-off valve by which refrigerant mass flows can be regulated to optimize refrigeration systems. Because of the great number of connection types, such as welded and flanged connections, they are highly flexible in use.
At that quality is always our utmost priority. Our straight-way and angle shut-off valves are made from stainless steel or cast material with spindle back seats and packing gland or bellow seals. Check valves come with double damping.
3 FAS PRODUKTE [FAS PRODUCTS]
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-71722 FAS PRODUKTE [FAS PRODUCTS] NH3 (R-717)
3.1 ABSPERRVENTILE MIT FESTEN ANSCHLÜSSEN (HDSK/HESK) [SHUTOFF VALVES WITH PERMANENT CONNECTIONS (HDSK/HESK)]
✓ 100%✓
leakagetested
Made in Germany
-50 °C-58 °F
Guss, lackiert [cast iron, painted]
-10 °C+14 °F
+140 °C+284 °F
24 bar348 psi
32 bar464 psi
HDSK HESK
L3
L2
L1
D1
D1
L4
WB
WB
L4
L3
L1
L2
D1
D1
L4
WB
WB
L4
Part NumberHDSK
DNmm
WBmm
L1mm
L2mm
L3mm
L4mm
Kvm3/h
804 511 600 25 33,7 190 130 105 20 8,0
804 513 600 32 42,4 225 170 135 25 20
804 514 600 40 48,3 225 170 135 25 22
804 515 600 50 60,3 255 200 155 30 33
804 516 600 65 76,1 310 225 175 35 64
804 519 600 80 88,9 370 280 220 40 102
Part NumberHESK
DNmm
WBmm
L1mm
L2mm
L3mm
L4mm
Kvm3/h
805 511 600 25 33,7 175 85 90 20 10
805 513 600 32 42,4 220 100 100 25 30
805 514 600 40 48,3 220 100 100 25 34
805 515 600 50 60,3 245 120 120 30 42
805 516 600 65 76,1 305 170 165 35 94
805 519 600 80 88,9 380 185 195 40 124
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717NH3 (R-717) FAS PRODUKTE [FAS PRODUCTS] 23
3.2 ABSPERRVENTILE MIT LÖSBAREN ANSCHLÜSSEN (HDK/ HEK) [SHUTOFF VALVES WITH DETACHABLE CONNECTIONS (HDK/ HEK)]
✓ 100%✓ Made in Germany
leakagetested
HDK HEK
-50 °C-58 °F
Guss, lackiert [cast iron, painted]
-10 °C+14 °F
+140 °C+284 °F
24 bar348 psi
32 bar464 psi
L1
L3
L2L1L3L2
Part NumberHDK
DNmm
WBmm
L1mm
L2mm
L3mm
Kv
m3/h
804 111 600 25 33,7 140 135 105 8,3
804 113 600 32 42,4 210 180 140 18
804 114 600 40 48,3 210 180 140 22
804 115 600 50 60,3 220 205 155 36
804 116 600 65 76,1 245 230 175 71
804 119 600 80 88,9 295 290 230 108
804 120 600 100 114,3 330 350 280 178
Part NumberHEK
DNmm
WBmm
L1mm
L2mm
L3mm
Kv
m3/h
805 111 600 25 33,7 170 85 80 11
805 113 600 32 42,4 215 100 100 26
805 114 600 40 48,3 215 100 100 32
805 115 600 50 60,3 250 120 120 50
805 116 600 65 76,1 270 135 130 90
805 119 600 80 88,9 340 145 155 134
805 120 600 100 114,3 400 170 180 202
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
✓ 100%✓ Made in Germany
leakagetested
24 FAS PRODUKTE [FAS PRODUCTS] NH3 (R-717)
3.3 RÜCKSCHLAGVENTILE MIT FESTEN ANSCHLÜSSEN (RVS/ RES) [CHECK VALVES WITH PERMANENT CONNECTIONS (RVS/ RES)]
RESRVS
-60 °C-76 °F
Guss, lackiert [cast iron, painted]
-10 °C+14 °F
+140 °C+284 °F
24 bar348 psi
32 bar464 psi
Part NumberRVS
DNmm
WBmm
L1mm
L2mm
L3mm
L4mm
Kv
m3/h
814 311 600 25 33,7 185 105 80 20 9,0
814 313 600 32 42,4 225 130 95 25 20
814 314 600 40 48,3 225 130 95 25 22
814 315 600 50 60,3 255 160 115 30 35
814 316 600 65 76,1 310 180 130 35 62
814 319 600 80 88,9 370 245 185 40 98
Part NumberRES
DNmm
WBmm
L1mm
L2mm
L3mm
L4mm
Kv
m3/h
815 311 600 25 33,7 145 85 90 20 11
815 313 600 32 42,4 170 100 100 25 25
815 314 600 40 48,3 170 100 100 25 28
815 315 600 50 60,3 195 120 120 30 49
815 317 600 65 76,1 255 170 165 35 77
815 318 600 80 88,9 330 185 195 40 106
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
3.4 RÜCKSCHLAGVENTILE MIT LÖSBAREN ANSCHLÜSSEN (RV/ RVE) [CHECK VALVES WITH DETACHABLE CONNECTIONS (RV/ RVE)]
NH3 (R-717) FAS PRODUKTE [FAS PRODUCTS] 25
RV RVE✓ 100%✓ Made in Germany
leakagetested
-60 °C-76 °F
Guss, lackiert [cast iron, painted]
-10 °C+14 °F
+140 °C+284 °F
24 bar348 psi
32 bar464 psi
L1L3
L2 L1
L3
L2
Part NumberRV
DNmm
WBmm
L1mm
L2mm
L3mm
Kv
m3/h
814 111 600 25 33,7 140 105 80 8
814 113 600 32 42,4 210 135 95 18
814 114 600 40 48,3 210 135 95 21
814 115 600 50 60,3 220 170 115 40
814 116 600 65 76,1 245 185 130 66
814 119 600 80 88,9 295 255 195 102
Part NumberRVE
DNmm
WBmm
L1mm
L2mm
L3mm
Kv
m3/h
815 111 600 25 33,7 140 85 80 12
815 113 600 32 42,4 170 100 100 22
815 114 600 40 48,3 170 100 100 26
815 115 600 50 60,3 200 120 120 46
815 116 600 65 76,1 220 135 130 77
815 119 600 80 88,9 290 145 155 125
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
✓ 100%✓ Made in Germany
leakagetested
3.5 ABSPERRBARE RÜCKSCHLAGVENTILE MIT FESTEN ANSCHLÜSSEN (RVHS/ REHS) [SHUTOFF CHECK VALVES WITH PERMANENT CONNECTIONS (RVHS/ REHS)]
26 FAS PRODUKTE [FAS PRODUCTS] NH3 (R-717)
-60 °C-76 °F
Guss, lackiert [cast iron, painted]
-10 °C+14 °F
+140 °C+284 °F
24 bar348 psi
32 bar464 psi
✓ Weitere Kappen S. 34 [Additional caps p. 34]✓ Öffnungsdifferenzdruck
0,04 bar [Opening differential
pressure 0,04 bar]✓ Maximaler Schließdruck
28 bar [Maximum closing pressure
differential 28 bar]
REHSRVHS
Part Number RVHS
DNmm
WBmm
L1mm
L2mm
L3mm
L4mm
Kv
m3/h
815 811 600 25 33,7 185 160 135 20 9,1
815 813 600 32 42,4 225 190 155 25 22
815 814 600 40 48,3 225 190 155 25 24
815 815 600 50 60,3 255 210 170 30 35
815 816 600 65 76,1 310 250 200 35 65
815 819 600 80 88,9 370 320 260 40 104
Part NumberREHS
DNmm
WBmm
L1mm
L2mm
L3mm
L4mm
Kv
m3/h
815 611 600 25 33,7 205 85 90 20 11
815 613 600 32 42,4 240 100 100 25 31
815 614 600 40 48,3 240 100 100 25 35
815 615 600 50 60,3 260 120 120 30 51
815 616 600 65 76,1 335 170 165 35 79
815 618 600 76 88,9 430 185 195 40 119
815 619 600 80 88,9 430 185 195 40 119
NH3 (R-717) 27
Der feine Unterschied: Echte Qualität zeigt sich im Detail. Mit einem umfangreichen Angebot an Zubehör bieten wir Komponenten, die der Lösung von Systemherausforderungen dienen. Unser Zubehör ist dabei dank der Anschlussvarianten für Schweiß- und Gewindeverbindungen flexibel einsetzbar.
AWA-Schaugläser liefern wir mit Flansch, Einschraub-, Rotalock-, Löt- und Schweißanschlüssen in unterschiedlichen Varianten. Mithilfe unserer Fittinge und Adapter verbinden wir ungleiche Anschlüsse miteinander. So lassen sich auch Kälteanlagen unterschiedlicher Bauarten mühelos befüllen – durch unsere Füllventile mit Gewindeanschluss.
The subtle difference: Real quality shows up in the detail. Our large range of accessories includes components that help to tackle system challenges. The different options for welded and threaded connections provide for a flexible use of our accessories.
AWA sight glasses come with flanged, screwed, Rotalock, brazed and welded connections of different versions. Our fittings and adapters are used to join dissimilar connections. It is thus possible to easily charge refrigeration systems of different types – by using our service valves.
4 ZUBEHÖR [ACCESSORIES]
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-71728 ZUBEHÖR [ACCESSORIES] NH3 (R-717)
✓ Made in Germany
4.1 FILTER MIT SCHWEISSANSCHLÜSSEN – EDELSTAHL/ STAHLGUSS [STRAINER WITH WELDING CONNECTIONS – STAINLESS STEEL/ STEEL CASTING]
✓ Weitere Maschenweiten auf Anfrage [Additional mesh size upon request]
✓ 100% Hetested
Edelstahl - Serie 883 [stainless steel - serie 883]
Part Number WBmm
D1mm
L1mm
L2mm
L3mm
L4mm
mesh sizeµm [mesh]
883 003 000 13,5 5,5 90 93 19 45 100 [150]
883 005 000 17,2 5,5 90 93 19 45 100 [150]
883 008 000 21,3 6 100 100 20 56 100 [150]
883 010 000 26,9 6,5 136 110 24,5 6,5 100 [150]
Stahlguss - Serie 884 [steel casting - series 884]
Part Number DN WBmm
L1mm
L2mm
mesh sizeµm [mesh]
884 001 000 40 48,3 123 62 150 [100]
884 002 000 50 60,3 128 67 150 [100]
884 003 000 65 76,1 145 72 150 [100]
884 004 000 80 88,9 170 90 150 [100]
884 005 000 100 114,3 214 116 150 [100]
884 006 000 125 139,4 274 150 150 [100]
884 007 000 150 168,3 313 170 150 [100]
884 008 000 200 219,1 361 190 150 [100]
WB
L2
WB
L2
L1
L1
L3
WB
WB
L2
L4
D1
stainless steel steel casting
Stahlguss, grundiert[steel casting, primed]
Edelstahl[stainless steel]
47 bar682 psi
63 bar914 psi
-60 °C-76 °F
-40 °C-40 °F
+150 °C+302 °F
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
4.2 ROTALOCK SCHWEISSNIPPEL – SET [ROTALOCK WELDING NIPPLE – SET]
NH3 (R-717) ZUBEHÖR [ACCESSORIES] 29
✓ Rotalockventile S. 8, 14 [Rotalock valves p. 8, 14]
✓ 100%✓ Made in Germany
testedsteel stainless steel
Stahl [steel]
Part Numberwith PTFE gasket
RLMinch
D1mm
D2mm
L1mm
L2mm
590 186 000 3/4 13 8,5 24 3
590 182 000 1 19 13 24 3
590 171 000 1 1/4 25,5 19 25,5 3
590 177 000 1 3/4 35 30 28 5,5
590 183 000 2 1/4 50 40 50 35,5
Edelstahl [stainless steel]
Part Number WBmm
DNmm
NPSinch
RLFinch
L1mm
271 001 000 13,5 08 1/4 3/4 31,5
271 002 000 17,2 10 3/8 1 40
271 003 000 21,3 15 1/2 1 1/4 40
271 004 000 26,9 20 3/4 1 1/4 35
271 005 000 33,7 25 1 1 3/4 45
271 006 000 42,4 32 1 1/4 2 1/4 45
271 007 000 48,3 40 1 1/2 2 1/4 45
PTFE Gasket
Stahl [steel] Edelstahl [stainless steel]
47 bar682 psi
63 bar914 psi
-40 °C-40 °F
-10 °C+14 °F
+140 °C+284 °F
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
✓ 100%✓
Hetested
Made in Germany
30 ZUBEHÖR [ACCESSORIES] NH3 (R-717)
4.3 SCHAUGLÄSER – FLÜSSIGKEITSSTANDANZEIGER – METRISCHES GEWINDE [SIGHT GLASSES – LIQUID LEVEL INDICATOR – METRIC THREAD]
Typ DR
-50 °C-58 °F
Stahl [steel] (Ni)
-10 °C+14 °F
+120 °C+248 °F
34 bar493 psi
45 bar653 psi
✓ Erweiterter Druckbereich erhältlich [Extended pressure ranges available]
Part Number Part Number
Typ Dglatte Linse [smooth lens]
Typ DRprofilierte Linse [grooved lens]
Mmm
D1mm
L1mm
SWmm
181 121 100 181 121 200 24 x 1 18 15 30
181 122 100 181 122 200 26 x 1,5 17 25 32
181 123 100 181 123 200 36 x 1,5 27 28 46
181 124 100 181 124 200 52 x 2 39 42 60
Typ D
D2
L1
D1
SW
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
4.4 SCHAUGLÄSER – FLÜSSIGKEITSSTANDANZEIGER – NPTF-GEWINDE [SIGHT GLASSES – LIQUID LEVEL INDICATOR – NPTF-THREAD]
NH3 (R-717) ZUBEHÖR [ACCESSORIES] 31
RD pyT
Part Number Part Number
Typ Dglatte Linse [smooth lens]
Typ DRprofilierte Linse [grooved lens]
NPTF inch
D1mm
L1mm
SWmm
181 112 100 181 112 200 1/2 14 24 24
181 113 100 181 113 200 3/4 17 25 27
181 114 100 181 114 200 1 22 32 36
181 115 100 181 115 200 1 1/4 30 36 46
181 116 100 181 116 200 1 1/2 33 38 50
181 117 100 181 117 200 2 39 40 65
D pyT ✓ 100%✓
Hetested
Made in Germany
-50 °C-58 °F
Stahl [steel] (Ni)
-10 °C+14 °F
+120 °C+248 °F
47 bar682 psi
63 bar914 psi
D2
L1D1
SW
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
✓ 100%✓
Hetested
Made in Germany
4.5 SCHAUGLÄSER – FLÜSSIGKEITSSTANDANZEIGER – ROTALOCK [SIGHT GLASSES – LIQUID LEVEL INDICATOR – ROTALOCK]
32 ZUBEHÖR [ACCESSORIES] NH3 (R-717)
Part Number Part Number Part Number
Typ RLglatte Linse [smooth lens]
Typ RLRprofilierte Linse [grooved lens]
Typ RLCLinse mit Konus[lens with cone]
RLF inch
D1mm
L1mm
L2mm SW
mm
182 101 070 182 101 080 182 101 090 1 1/4 17 17 7 36
182 102 070 182 102 080 182 102 090 1 3/4 27 19 10 50
182 103 070 182 103 080 182 103 090 2 1/4 36 25 13 65
25 bar363 psi
-30 °C-22 °F
Stahl [steel] (Ni)
-10 °C14 °F
120 °C248 °F
45 bar653 psi
-60 °C-76 °F
40 bar580 psi
D1
SW
Typ RL
RLF
L2
L1
RLR pyT
Union nut
Sight glass
Gasket PTFE
CLR pyT
✓ Zubehör auf Anfrage [Acessories upon request]
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
4.6 DURCHGANGSSCHAUGLÄSER MIT SCHWEISS-/ LÖTANSCHLÜSSEN – EDELSTAHL [IN-LINE SIGHT GLASSES WITH WELDING/ SOLDER CONNECTIONS – STAINLESS STEEL]
NH3 (R-717) ZUBEHÖR [ACCESSORIES] 33
Type D smooth lens
einseitig [unidirectional]
Part Number WB mm
DNmm
NPSinch
D1mm
L1mm
L2mm
PSbar
185 401 000 13,5 08 1/4 8,5 65 37 63
185 402 000 17,2 10 3/8 12 65 47 63
185 403 000 21,3 15 1/2 16 65 47 63
185 404 000 26,9 20 3/4 21 75 52 63
185 405 000 33,7 25 1 27 95 62 63
185 406 000 42,4 32 1 1/4 35 95 62 63
beidseitig [bidirectional]
Part Number
Type Dsmooth lens
WBmm
DNmm
NPSinch
D1mm
L1mm
L2mm
PSbar
185 411 000 13,5 08 1/4" 8,5 65 58 140
185 412 000 17,2 10 3/8" 12 65 63 140
185 413 000 21,3 15 1/2" 16 65 73 140
185 414 000 26,9 20 3/4" 21 75 73 140
185 415 000 33,7 25 1" 27 95 73 140
185 416 000 42,4 32 1 1/4" 35 95 83 140
185 417 000 48,3 40 1 1/2" 40 95 88 140
185 418 000 60,3 50 2" 52 95 100 63
✓ Made in Germany
-50 °C-58 °F
Edelstahl [stainless steel]
-10 °C+14 °F
+120 °C+248 °F
63 bar914 psi
140 bar2030 psi
105 bar1523 psi
✓ Glass 100% He tested
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
4.7 SPINDELSCHUTZKAPPE – ALUMINIUM – SET [SPINDLE PROTECTION CAP – ALUMINIUM – SET]
34 ZUBEHÖR [ACCESSORIES] NH3 (R-717)
✓ Made in Germany
35 bar508 psi
-40 °C-40 °F
Aluminium [aluminium]
140 °C284 °F
150 °C302 °F
160 bar2320 psi
-60 °C-76 °F
63 bar914 psi
Aluminium
Part Number Part Number D1mm
L1mm
SWmm
PSbar
passend für Ventile[suitable for valve type]
Set with Al-Seal Ring
Sealable capSet with Al-Seal Ring
503 000 045 3/4-16 UNF 37,5 22 160 S19 / S22 / E22
506 000 045 3/4-16 UNF 43,5 22 160 S30 / E30 / Brass Shutoff valve
506 000 048 3/4-16 UNF 43,5 24 160 S19 / S22 / S30 / E22 / E30
508 000 045 M 24 x 2 55 27 160 S36 / S40 / S50 / E40 / E50
508 000 048 M 24 x 2 55 30 160 S36 / S40 / S50 / E40 / E50 / DN32
700 000 145 700 000 148 M 27 x 2 55 32 35 Cast Iron Shutoff valve DN40
700 010 145 700 010 148 M 36 x 1,5 66 41 35 Cast Iron Shutoff valve DN50/DN50-2
720 030 045 M 36 x 1,5 85 41 35 Cast Iron Shutoff valve DN80
720 040 045 M 36 x 1,5 95 41 35 Cast Iron Shutoff valve DN100
720 040 048 M 36 x 1,5 95 41 35 Cast Iron Shutoff valve DN80/DN100
250 001 045 M 22 x 1,5 51 27 63 Aluminium Shutoff valve
Sealable cap
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717
PERFEKTION IST UNSER ANSPRUCH
[PERFECTION IS OUR MISSION]
KONTAKT
Tel. +49 (0) 34 47 893-0Fax +49 (0) 34 47 [email protected]
ANSCHRIFT
Armaturenwerk Altenburg GmbHPostfach 135104583 Altenburg Germany
STANDORT
Armaturenwerk Altenburg GmbHAm Weißen Berg 3004600 AltenburgGermany
TECHNISCHER SUPPORT
Sie benötigen auch eine individuelle und qualitativ hochwertige Lösung? Dann setzen wir diese gerne für Sie und mit Ihnen um.
Wir freuen uns auf Ihre Anfrage!
Änderungen und Irrtümer vorbehalten [Subject to changes and errors], 10.2018/R-717