NICOTINE ADDICTION TREATING USING SENSITIV EQUIPMENT

1 . PREPARATION OF SPECTRONOSOD «ANTI TOBACCO»

1. Before being examined a patient smokes 2/3 of a cigarette.2. The rest of the cigarette and patient’s saliva are introduced into a plastic bag.3. Start up the program.

4. Create a patient card.

1

5. Fill in Last Name, First Name, age, sex, birth date. To choose englich menu press the button in a drop-down menu of Patient Card. Press OK.

2

6. Turn red points (by zones) on and record patient complaints over the last 2 months.

3

In case of a pronounced complaint at this time, use a function «WEIGHTING». A brown color of a complaint defines the most active and worrisome problem for the moment. Activation of all points is an indispensable condition. The option of selecting of a complaint from the group is available.

Add from the list

7. In the left upper corner press the button with a green tick «SAVE CHANGES».

8. Proceed to the Patient Card. Press the button «OK» , thereupon «LifeStream».

9. To choose manual mode, press the button depicting a hand: «AUTOMOTIVE/MANUAL MODE SWITCHING».

10. Press the button «UNCOVER/COLLECT EXAMINATIONS », in this case the list of examinations will expand.

4

11. In order to deselect all marks press right mouse button on a white filed on the right. In the appeared panel «DESELECT ALL/SELECT ALL» choose the line «DESELECT ALL» and all marks will be removed.

12. Select section «CHEST ORGANS» for examination. To select section put a mark in front of section’s name.

5

13. To launch examination mode press the button « RUNNING DIAGNOSTICS».

14. At the end of the examination press «CLOSE ACTIVE/CURRENT WINDOW» and exit the window.

6

15. Further, enter in the Patient Card, select section “CHEST ORGANS” and press the button «ANALYSIS… ».

7

16. In the appeared panel window press the button “External VEGETOTEST” (1), further, in the appeared small window write on the keyboard «TOBACCO»(2), at the same time put the package with a smoked cigarette and patient’s saliva to the chamber N (blue) and press OK (3). The samples are being tested. We have got the results of tobacco effect on chest organs. Now dispose the package with the smoked cigarette and patient’s saliva from the chamber N (to a dustbin).

Press the button « SPECTRONOSOD PREPARATION » .

8

17. Press the button «INVERSION» (1) at the appeared window above the diagram on the right, after that choose MATRIX (2) on which we will transfer information. It can be sugar grains or alcohol.

Put a package with sugar grains or 50% alcohol vessel into the chamber S (red). Press the button «START» (3). Spectronosod preparation is proceeding. Press the button «CLOSE». At the next window also press the button «CLOSE».

9

18. From the list of tested sections choose «CHEST ORGANS» without any comments on the right (clear section). Press the button «ANALYSIS …».

10

19. In the appeared window press «VEGETOTEST » (1). In the appeared small window write on the keyboard name of the medicine, recommended dosage and taking time (for instance, 1 granule of ANTITOBACCO is to be taken in the morning, midday and evening, if this is alcohol it is necessary to point out the number of drops). At the same time shift the package with ready s pectronosod from the chamber S (red) to the chamber N (blue). Press the button OK (3). After the Test has being proceeded, we get the results of the effect caused by the ready spectronosod. Press the button «CLOSE» .

20. To see the result, you should go out the window "COMPARISON OF SURVEY RESULTS"

11

21. Every new dosage (2 granules are to be taken in the morning, midday and evening, 3 granules in the morning, midday and evening, and so on) is selected on the clear with no comments «CHEST ORGANS» section cut. To select optimal dosage for a patient (which will provide maximum percent of improvement) choose the button «EXAMINATION RESULTS COMPARISON» in the window of comparative analysis. In the window «Examination results comparison» pay attention to the date:

Press the button «Set filter by organ» (1). Tick an organ or section cut (with no comments) (2) that was examined. With the help of the button (SEARCH UP AND DOWN) (3). View examination results (4).

22. Each new dose (2 GLOBES the morning, afternoon and evening, 3 GLOBES morning, afternoon and evening, etc.) is tested on a clean slice "CHEST ORGANS" without comment. Choose the most optimal dose for the patient (which will give the maximum percentage of improvement) in the comparative analysis.

Optimal dosage and intake time should be typed into the Diagnostic Decision/Conclusion manually.

Open the window «PATIENT OVERVIEW».

Note the name of the medicine, dosage and intake time. Preparation saves the information during 2 weeks. In two weeks the preparation of the spectronosod may be repeated if necessary.

12

2. BIORESONANCE THERAPY

Bioresonance therapy treatment consists of two stages that follow in consecutive order1st stage Bioresonance Therapy 2nd stage MORA-Therapy

1st STAGE: BIORESONANCE THERAPY

1. To choose Bioresonance Therapy press the button «Lifestream» in the Patient Card.

2. Press the button depicting a hand: «AUTOMOTIVE/MANUAL MODE SWITCHING».

3. Press “EXPAND/GATHER STUDY”» and the list of examination will expand.

13

4. Right-click on the right white field activates a small menu: CLEAR ALL/SELECT ALL. To tick off all selections choose the line CLEAR ALL.

14

In the list of sections select next sections: EXPRESS – MONITORING CROSS SECTIONAL CUT OF A BRONCHUS PULMONARY TISSUE MEDIASTINAL LYMPHANGION

5. Press the button «RUNNING DIAGNOSTICS». Organs for treatment are tested. 6. Select the section cut by clicking left mouse button.7. Press the button «CREATE NUDIS AND GET CHARACTERISTICS»

8. In the window «APPLICATION OF PHYSIOLOGICAL CHARACTERISTICS TO VIRTUAL MODEL»:

You should select the area for which you want to make the influence. You should select an area with concentration of negative markers (select only 4 or 5 or 6 markers).To do this you have to create focus around this area. Select point on a border of area and click ones on the left mouse button, and now you just draw a line around the area which you want to influence.

At the right side of the window there are buttons, you should press “RATE” button.

15

At the right side of the window there are buttons, you should press “RATE” button.

Press the button «CLOSE» 9. Now you should do the same with all organs that we've selected and want to treat (repeat

from step 5 to 8). By analogy outline contours of every organ for treating.

16

10. Press the button «ALL FOCUSES» (1). The organ is being tested.

11. Press the button «BIORESONANCE THERAPY» «ALL ORGANS» (2).

Repeat exposure 10 times.

17

After 10 influences we doing the control of results – press the button "Result of the currently selected organ".

12. After the 10th exposure make a summary of the therapy results. Press the button « RESULT OF THE CURRENTLY SELECTED ORGAN ». Repeat the procedure of «RESULT OF THE CURRENTLY SELECTED ORGAN» for every organ.

13. To check the results of BIORESONANCE THERAPY exposure use the button «COMPARISON RESULTS EXAMINATION».

18

14. In the window (clear, without medicine items) pay attention to the date. Press the button «SET FILTER BY ORGAN».Tick an organ or section cut that was examined, with the help of the button «SEARCH UP AND DOWN» .

15. View examination results.

19

You shouldn't do more than 10 influences in one day. 1 day is 1 session. The course contains 10 sessions, sessions should be done every day or every other day. You can start the new course only six months after the previous.

2nd STAGE MORA-THERAPY

FREQUENCY COMPENSATION

1. During the frequency compensation 1st exposure is carried out on the section «EXPRESS- MONITORING», 2nd and 3rd exposures proceed the rest of tested sections (depending on the changes of markers).

2. Select the organ that was treated by Bioresonance therapy (after the last exposure).3. Press the button « FORECAST RESERVES » (green sight).

20

4. Expose the green sight to a place with the largest number of tinted markers.

5. Move the "target" with the cursor of the mouse on a marker of 5-th or 6-th positions. Press the button "RATE". Treatment "FREQUENCY INDEMNIFICATION" can be started repeatedly , approximately up to 10 times on one body or before elimination of negative markers.

21

6. To review the results of exposure use the button «COMPARISON RESULTS EXAMINATION » after every exposure by Mora-therapy.

22

You see the results of the treatment.

You shouldn't do more than 10 influences in one day. 1 day is 1 session. The course contains 10 sessions, sessions should be done every day or every other day. You can start the new course only six months after the previous.

COURSE OF TREATMENT: BIORESONANCE THERAPY + MORA THERAPY

Day 1 = session 1Number of exposures per day: Bioresonance therapy not more than 10, Mora- therapy not more than 10.The treatment is provided every day or every other day.Number of sessions is 6-10 (depends on the acute process). The break between courses of treatment is 6 months. In addition, to relieve nervous tension it is recommended to pick up (test) sedative medications and medications for treatment of concomitant diseases (if there are some).

23