Date post: | 14-Jun-2015 |
Category: |
Technology |
Upload: | nidec-corporation |
View: | 658 times |
Download: | 14 times |
www.nidec-asi.com
Electric Motors & GeneratorsElectric Motors & Generators
PPT2013.01.01.04EN
2www.nidec-asi.com
All our products are engineered-to-order, not built tostock. Customize solutions, reliability and flexibility are
key concepts in our manufacturing processes
Induction Machines
150 kW to 25 MW
Medium & High Voltage
Explosion Proof Machines
Synchronous Motors & Generators
1 to 40 MW
Medium & High Voltage
DC Motors
2 to 6,000 kW (at 150 r/min in tandem)
Variable Speed Machines
TAM
>3000 kW750 to3000 kW
375 to 750 kW
SAM
375 to750 kW
>3000 kW
750 to 3000 kW
Sales
750 to 3000 kW
375 to750 kW
>3000 kW
Electric Motors & GeneratorsProduct Lines
PPT2013.01.01.04EN
3www.nidec-asi.com
Induction machines
Power rating:
− 150 ÷ 25,000 kW
− 200 ÷ 33,000 HP
Voltage:
− up to 15 kV
Mass:
− 1,500 ÷ 120,000 kg
Number of poles:
− 2 ÷ 36
Frame size:
− 315 mm through 1120, 10, 11, 12, 13
Synchronous machines
Power rating:
− 150 ÷ 45,000 kW
− 200 ÷ 60,000 HP
Voltage:
− up to 15 kV
Mass:
− 1,500 ÷ 160,000 kg
Number of poles:
− 2 ÷ 36
Frame size:
− 450 mm through 1120, 10, 11, 12, 13
Explosion-proof motors
Power rating:
− 150 ÷ 4,500 kW
− 200 ÷ 6,000 HP
Voltage:
− up to 15 kV
Mass:
− 1,500 ÷ 25,000 kg
Number of poles:
− 2 ÷ 20
Frame size:
− 355 ÷ 800 mm
Cooling method:
− IC 511, IC 411
DC machines
Power rating:
− 2 ÷ 6000 kW (@150 rpm in tandem)
Voltage:
− up to 1000 V
Mass:
− 100 ÷ 110,000 kg
Number of poles:
− 2 ÷ 24
Frame size:
− 80 mm ÷ 24
Electric Motors & GeneratorsProduct Lines
PPT2013.01.01.04EN
4www.nidec-asi.com
Induction MachineSeries: CT, CR, CB, W, N, CA
CT = IC 611 = TEAACCR = IC 81W = TEWACCB = IC 31 = TEPVW = IC 01 = WPI & WPIIN = IC 01 = ODPCA = IC 411= TEFC (ribbed frame)
Small and medium frame sizes = shaft height : 315 mm (statorOD = 546 mm), 355, 400, 450, 500, 560, 630, 710, 800, 900,1000, 1120, 1250 mm (stator OD = 1950 mm)
Large frame sizes = 10 (shaft height = 1250 mm, stator OD =1950 mm), 11, 12, 13 (stator OD = 3350 mm)
Max four number of frame lenghts per each sizeStandard fabricated welded aluminum squirrel cage. Optional fabricated copper alloy brazed squirrel cage forspecial applications or upon request)
Single punch laminations up to 1200 mm diameter, segmented when larger.
Standard thickness 0,50 ÷ 0,65 mm, losses 1,7 ÷ 2,3 W/kg @ 1 tesla
Short-pitch two-layer stator winding, insulated with class-F Micasystem®, based on high-performance micatape and blend of solventless epoxy resins, hi-pot tested before Vacuum Pressure Impregnation
Horizontal or vertical mounting
2-pole stiff rotor shaft
Power Ratings: 150 - 25,000 kW200 - 33,000 HP
No. of Pole: 2 - 36Voltage: up to 15 kVMass: 1,500 - 120,000 kg
PPT2013.01.01.04EN
5www.nidec-asi.com
IC 01Enclosures with openings to the environmentand using a shaft mounted fan (ODP, WPI,WP2)
IC 411Enclosures sealed to the environment andusing a surface type air to air heat exchanger(TEFC)
IC 611Enclosures sealed to the environment andusing a tube type air-to-air heat exchanger(TEAAC)
IC W37 A81Enclosures sealed to the environment andusing internal air as the primary coolant andwater as the secondary coolant by means of awater-to-air heat exchanger (TEWAC)
An optimized cooling system helps maximize efficiency
CT = TEAAC
CR = TEWAC
CB = TEPV
W = TEFC
IC W37 A81 enclosures
Induction MachineEnclosure Standards
PPT2013.01.01.04EN
6www.nidec-asi.com
Designed to meet specific application needs our synchronous motors provide outstandingperformance and reliability.
We have also consolidated experience in generators coupled to diesel engines
and turbines of all types.
Synchronous MachinesSeries: MS, GS, CS
MSxx = Synchronous MotorGSxx = Synchronous GeneratorCSxx = Synchonous rotating Compensator
xx same as for Induction Series, according to cooling method
Power Ratings: 150 - 45,000 Kw200 ÷ 60,000 HP
Voltage: up to 15 kVMass: 1,500 - 160,000 kgNo. of Poles: 2 - 36Frame sizes = shaft height : 450 mm (stator OD = 750 mm), 500, 560, 630,710, 800, 900, 1000, 1120, 1250 mm =10, 11, 12, 13 (stator OD = 3350 mm)
Several frame lenghts per each size & rotor type
PPT2013.01.01.04EN
7www.nidec-asi.com
Several rotor types, according to size, speed, application :
1. Salient-pole rotor with stack of star punched laminations2. Salient-pole rotor with stacks of individual pole laminations, bolted or dove-tailed onto
spider or solid forging3. Salient pole rotor with solid forged pole-shoes, bolted onto solid forging4. Cylindrical rotor wit stack of cylindrical punched laminations5. Cylindrical rotor with one-piece solid forging (turbo-like)
Brushless excitation with shaft-mounted exciter and diode rectifier or static excitation withslip-ring & brushes
Synchronous MachinesSeries: MS, GS, CS
Horizontal and Vertical Mounting Available
Accordance to API 546
1 2 43 5
PPT2013.01.01.04EN
8www.nidec-asi.com
ET = IC 511 = TEAAC
Type of protection ATEX / IECEx d IIB÷IIC T3÷T4 at -20/+50°C(according to size, polarity, gasgroup, mounting arrangement)
Power rating: 160 ÷ 4500 kWVoltage: up to 15 kVMass: 1800 ÷ 20000 kgNumber of pole = 2÷20 poles
Frame sizes = shaft height: 400 mm (statorOD = 546 mm), 450, 500, 560, 630, 710, 800(stator OD = 1320 mm)
Max three frame lenghts per each size
CAD = IC 411 = TEFC
Type of protection ATEX / IECEx d IIB T4 at -20/+60°C
Power rating: 150 ÷ 700 kWVoltage: up to 7,2 kVMass: 1800 ÷ 4000 kgNumber of pole: 2÷8 poles
Frame sizes = shaft height: 355 mm(stator OD = 546 mm), 400, 450(stator OD = 700 mm)
Only one frame lenghts per each size
Hazardous Area MachinesSeries: ET - CAD
PPT2013.01.01.04EN
9www.nidec-asi.com
NIDEC ASI has installed more than 2400 explosion proof area machinesin over 49 countries
Hazardous Area MachinesSeries: ET - CAD
Same main features as other induction series
Other types of protection for hazardous area are : Ex p = pressurized, Ex n = non-sparking,Ex e = increased safety
Key issues : explosion-proof frame, flame-proof joints, gas ignition temperature class respect,boxes and auxiliaries adequate for hazardous area
Our hazardous Area Machines meet both most exigent requirement standards (Shell, SaudiAramco, Exxon Mobil) and the main international standard IEC 60079
Certified by CESI (CENELEC member) – Milan
Variable-speed / frequency driven with suitable design vs certification costraints
PPT2013.01.01.04EN
10www.nidec-asi.com
Special Designs in the GH/DH series include totally enclosed non ventilated motors foroutdoor applications. These machines are particullary adapt for heavy handling lifting systems
Performance features:
High dynamic responseWide speed range High maximum speeds High efficiency High commutating capacity during current transients
DC MachineSeries: GH - DH
Power Ratings: 2 - 6,000 kW (at 150 RPM)Voltage: up to 1,000 VMass: 100 - 110,000 kgShaft Height:80 - 900 mmNo. of pole: 4 - 6Mounting Arrangement: Horizontal/VerticalType of Cooling: IC06, IC666, IC86W, IC37
Designed for material handling and applications with high torque, frequent acceleration ordeceleration, with fast response requirements.
PPT2013.01.01.04EN
11www.nidec-asi.com
MD Series
Power Ratings: up to 500 kW
Voltage: up to 500 V
Mass: 400 - 9,000 kg
Frame Size: 804 – 824Number of pole: 4÷6Mounting Arrangement : horizontal or verticalCooling method: IC06, IC666, IC86W, IC37 but
also IC410
Massive stator frame and laminated poles
DC MachineSeries: MD800 – MDL800, MCF
MCF Series
Power Ratings: up to 1000 kW
Voltage: up to 1000 V
Mass: up to 110,000 kg
Frame Size: up to 6000 mm, size according to
number of polesNumber of pole: 8÷24Mounting arrangement : horizontalCooling method: IC06, IC666, IC86W, IC37(always force ventilated)
Massive stator frame and laminated poles
Our DC machines come in more than 20 different shaft heights and nearly 100 different frame size to coverall applicable industry applications with significant experience in Marine, Metals & Plastics applications. All
DC machines are laminated frame design and can be supplied by any DC converter system.
PPT2013.01.01.04EN
12www.nidec-asi.com
High Speed Induction Motors
Power Ratings: 5,000 - 75,000 kW
Voltage: up to 15 kV
Mass: 10,000 - 160,000 kg
Speed Range: 70% - 105% RPM
Top Speed: 8,000 RPM
High Speed Synchronous Motors
Power Ratings: 500 - 15,000 kW
Voltage: up to 15 kV
Mass: 4,000 - 40,000 kg
Speed Range: 70% - 105% RPM
Top Speed: 20,000 RPM
NIDEC ASI has over 15 years of experience in the manufacture of high speed motors. Ourhigh speed machines guarantee high quality power and energy efficiency, offering low
maintenance advantages over traditional motors with gear box.
High Speed Motors
PPT2013.01.01.04EN
13www.nidec-asi.com
High Speed MotorsPower Range
Key features
These synchronous andinduction machines aretypically used to drivecentrifugal load equipmentsuch as compressors andpumps or to be driven by gasturbines.
High-speed machines offersignificant advantages overtraditional solutions with gearboxes including :
− Higher uptime
− Reduced power losses inthe drive train
− Lower maintenance andoperating costs
− Lower noise level.
ASI's experience inPermanent Magnet design isextending the limits ofcapability to new power andspeed ratings
24000
A
B C
20
10
0
30
40
50
60
70
80
2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000
MW
Consolidated
New
Under discussion
Delivered
Recent projects update
rpm
PPT2013.01.01.04EN
14www.nidec-asi.com
Need to improve energy efficiency and performanceof existing industrial assets
Technological advancement
Permanent Magnet generators (GMP) and motors (MMP)offer higher efficiency and greater flexibility in design due tocompact footprint
Designs developed with genetic algorithm tools that identifyPareto optimum performance
Turbo-expanders and High-Speed compressors− ASI's experience in high
speed and specialapplications can helpachieve an increase inefficiency
Offshore wind turbinegenerators− The relative weight of
Permanent Magnetmachines make them highlysuitable for offshoreapplications
− ASI's segmented designallows plant to continueproducing energy even incase of a fault
Mini Hydro generators− The use of Permanent
Magnet generators in therevamping of mini-hydrostations is giving new life toexisting plants, increasingenergy production
Market drivers :
Permanent Magnet MachinesSeries: GMP - MMP
PPT2013.01.01.04EN
15www.nidec-asi.com
Right sizing the machine for your application guarantees optimum lifetime performance
NIDEC ASI is one of the world’s leading suppliers of Medium Voltage Variable Speed Drives.
The flexibility of our modular design allow us to configure solutions granting you greaterflexibility in term of plant layout.
Our remote diagnostic features can play an important role in your maintenance and operatingstrategies, contributing to a significant reduction in Life Cycle Cost for your equipment.
Variable Speed Drives
PPT2013.01.01.04EN
16www.nidec-asi.com
Full System Testing up to 45MW
We provide our customers with a full testing facility ina back-to-back configuration. Our recent up grademeans that we are able to even test our own high
speed machines.
Our special tests include heat run tests, inertiamoment evaluation, shaft voltage and ring tests (on
stator cores before winding assembly).
Test room is available for routine type andspecial tests on any type of machine
manufactured in the Monfalcone plant, as well assystem tests for variable frequency drive
equipment.
Product and Systems TestingSystem Test Platform
PPT2013.01.01.04EN