NIGHT-LITE PRO PARTS MANUAL

NIGHT-LITE PRO SERIES

* Use these codes to designate color needed:

01-White 06-Allmand Gold02-Gloss Black 09-Flat Black03-Gray 10-High temp Black04-Allmand Yellow 11-Red05-Orange 12-Chrome15-Plated

NIGHT-LITE PROPARTS MANUAL

ALLMAND BROS. INCP.O. BOX 888

HOLDREGE, NE 68949

PHONE: 308/995-4495, 1-800/562-1373ALLMAND FAX: 308/995-5887

ALLMAND PARTS FAX: 308/995-4883

NIGHT-LITE PRO SERIESSEPTEMBER 2001

Serial Number 0294PRO02 and Up

For Parts and Updates visit Allmand on the Web at www.allmand.com80025538

Not for

Rep

roduc

tion

NIGHT-LITE PRO SERIESSHO 1000 METALLIC VAPOR LAMP

A-1A

15

19

21

Not for

Rep

roduc

tion




SHO 1000 METALLIC VAPOR LAMPA-1BNS 610250 LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT.)

(REM. FIXTURES)NS 610265 LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT.) (HPS)NS 610255 LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS

(CUSHION MT.)NS 610253 LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS

(CUSHION MT.) (HPS)NS 650144 LAMP HOLDER ASSEMBLY WITH YOKE AND LAMPNS 610263 LAMP HOLDER ASSEMBLY WITH YOKE AND CUSHIONS, W/ HPS LAMP

(CUSHION MOUNT)1 1 610208 ALUMINUM RING2 1 610211 LAMP BT-372A 1 610218 LAMP 1000W SHO ED37 (HPS)3 2 ** #8 WASHER (STAINLESS STEEL)4 2 ** #8-32 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL)5 8 041028 #10-24 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL)156 8 043017 #10 INTERNAL TOOTH WASHER7 1 610207 ALUMINUM PLATE8 2 044013 #8 -32 NC NYLON INSERT NUT (STAINLESS STEEL)9 1 610209 LAMP TIP SUPPORTNS 1 650250 LAMP TIP SUPPORT (HIGH PRESSURE SODIUM)10 1 610210 LAMP TIP SUPPORT TUBE11 1 610212 CERAMIC SOCKET12 1 610201 REFLECTOR13 2 610213 END HOUSING GASKET14 1 610206 RH SOLID END CASTING15 2 044037 3/8 - 24 NF NYLON INSERT NUT16 4 047019 .75 OD x.385 ID x.20 NYLON WASHER17 2 045142 3/8 - 24 NF X 3/8 - 16 NC X 2" STUD18 1 680493 SOLID MOUNT YOKE19 2 047016 3/8 SAE WASHER20 044031 5/16-18 KEPS NUT21 2 041035 #10 - 24 NC X 1 1/4 ROUND HEAD BOLT22 4 610260 RUBBER SHOCK MOUNT SHO 100023 2 610235 SHO CUSHION MOUNT PLATE24 2 044018 10-24 NYLON LOCK NUT25 1 610234 SHO 1000 CUSHION MOUNT YOKE26 610236 SHO 1000 CUSHION MOUNT YOKE ASSEMBLY27 650159 16/3 PORTABLE CORD 6627A 1 310434 LAMP CONNECTOR AND LEAD (REMOVEABLE FIXTURE ONLY)28 1 510007 1/2-CORD GRIP29 1 610214 1/2” ENTRANCE ELBOW30 1 610215 1/2 CONDUIT NIPPLE31 1 610205 LH SOCKET END CASTING32 1 ** GREEN HEAT TEMP WIRE33 1 ** BLACK HEAT TEMP WIRE34 1 ** WHITE HEAT TEMP WIRE35 1 610203 LENS36 1 610217 LENS GASKET (SILICONE)37 2 044019 #10-24 NYLON INSERT NUT (STAINLESS)38 1 610202 LENS CHANNEL SET39 2 045070 #10-24 NC SQ BD HOOK BOLT (W/VISOR)40 1 610017 SHO 1000 LIGHT VISOR (OPTIONAL41 2 044016 #10-24 NC KEPS NUT

NO REQ’D PART NO DESCRIPTION

LEGEND: NS= Not Shown ** =Purchase locally

Not for

Rep

roduc

tion

NIGHT-LITE PRO SERIESMANUAL WINCH TOWER ASSEMBLY

B-1A

Not for

Rep

roduc

tion




MANUAL WINCH TOWER ASSEMBLY

B-1B



1 1 680102* 4" MANUAL WINCH TOWER WELDMENT2 2 320110 3” PULLEY W/BUSHING3 2 620550 1/2 - 13 NC X 2 1/8 LOCKING KNOB4 3 650110 .312 TOWER PAD5 1 352280 PLASTIC TOWER PAD6 1 043100 5/8 INTERNAL TOOTH LOCK WASHER7 8 310212 #8 CUSHION CLAMP8 1 046242 5/8 - 11 NC X 1 GRADE 5 BOLT9 2 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT10 3 044048 1/2 -13 NC NYLON INSERT NUT11 8 046015 1/4 - 20 NC X 1” GRADE 5 HEX BOLT12 8 044023 1/4 - 20 NC NYLON INSERT NUT13 14 047009 1/4” FLATWASHER STAINLESS STEEL14 8 041023 #10 X 3/8 SELF-TAPPING PLASTIC SCREW15 1 680180* 3" TOWER WELDMENT MANUAL WINCH16 1 352017* 2-5/8" MANUAL TOWER WELDMENT FOR REM. LIGHT BAR17 1 620511 WELDMENT, TOWER SUPPORT18 2 047030 5/8 FLAT WASHER (with painted tower)

1 047030 5/8 FLAT WASHER (with galvanized tower)19 1 044053 5/8 - 11 NC NYLON INSERT NUT20 1 650145 MAST LOCKING BAR21 1 047025 1/2” PLATED FLAT WASHER22 1 610531 DLB 1200 BRAKE WINCH - PLATED23 1 1/2” NUT (SUPPLIED WITH WINCH)24 1 WINCH SPRING (SUPPLIED WITH WINCH)25 1 712032 HANDLE FOR DLB 1200 - 7"26 3 046110 3/8 - 16 NC X 1 GRADE 5 BOLT27 3 047010 5/16” FLAT WASHER28 3 044038 3/8 -16 NC NYLON INSERT NUT29 1 320410 CORD REEL (OPTIONAL)30 1 320453 3/16” X 1-3/4” ROLL PINNot

for R

eprod

uctio

n

NIGHT-LITE PRO SERIESMANUAL WINCH TOWER CABLE ROUTING

B-2A

Not for

Rep

roduc

tion




MANUAL WINCH TOWER CABLE ROUTINGB-2B



1 2 620084 WIRE ROPE CLIP 3/16"2 1 045040 WIRE ROPE THIMBLE, 1/4"3 1 620076 STEEL CABLE 3/16- X 11'4 1 650140 MAST WIRING - 14/7 X 324" (STRAIGHT CORD)5 1 650133 STEEL CABLE 3/16” X 17’9"6 1 320185 STEEL CABLE 3/16" X 10’7 1 352016 MAST WIRING - 16/8 X 344" (CORD REEL 4 LIGHT)

650130* MANUAL WINCH TOWER COMPLETEWITH LIGHT BAR ASSEMBLY

INSTRUCTIONS FOR REPLACING STEEL CABLES.

3/16" X 11'REMOVE THE CUSHION CLAMPS AND MAST WRING FROM 3" MAST SECTION.REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION. REMOVE THE 3" PULLEY ATTHE END OF THE 3" MAST SECTION.REMOVE THE 2 5/8" ROUND MAST SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACENEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION. REPLACE 2 5/81' ROUNDMAST SECTION IN THE 3" MAST SECTION. ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL3" PULLEY. WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK ANDREINSTALL WIRE ROPE CLIPS. REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3” MASTSECTION.

3/16" X 17’9"REMOVE MAST WRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC)REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 4" MAST SECTION.REMOVE STOP BOLT AND WASHER.REMOVE 4 TOWER PADS AND 3" PULLEY AT THE END OF THE 4" MAST SECTION.REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER.REMOVE ALL BROKEN AND FRAYED CABLE.REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION ANDTHROUGH PULLEY BRACKETS.REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS.REPLACE 3" PULLEY AND 4" TOWER PADS.ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.REPLACE STOP BOLT AND WASHER.REPLACE CUSHION CLAMPS AND MAST WIRING ON 4" MAST SECTION.REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC)

3/16" X 10’REMOVE ALL BROKEN AND FRAYED CABLE. FEED NEW CABLE THROUGH EYELET IN MAST PIVOTSECTION.FEED THROUGH PULLEY BRACKETS AND AROUND PULLEY IN FRONT UPRIGHTS. ATTACH CABLE TO

WINCH AND WIND IN CLOCKWSE DIRECTION UNTIL ALL SLACK IS OUT.

Not for

Rep

roduc

tion

NIGHT-LITE PRO SERIESELECTRIC WINCH TOWER ASSEMBLY

B-3A

ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY

Not for

Rep

roduc

tion




B-3B

ELECTRIC WINCH TOWER ASSEMBLY


NO REQ’D PART NO DESCRIPTION 1 1 680184* WELDMENT, 4” TOWER, ELECTRIC 2 3 320112 2 1/2" PULLEY W/BUSHING3 2 320110 3" PULLEY4 1 620579 LOCK SPRING5 1 620577 LOCK HANDLE6 1 620550 LOCKING KNOB 1/2 - 13 NC X 2 1/8”7 2 650110 PLASTIC TOWER PAD, .3128 1 352280 PLASTIC TOWER PAD 5/16 SHORT9 1 043100 5/8 INTERNAL TOOTH LOCK WASHER10 1 046242 5/8 - 11 NC X 1 GRADE 5 BOLT11 8 022022 #8 CUSHION CLAMP12 1 090309 SPRING LATCH RELEASE DECAL13 5 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT14 5 044048 1/2 - 13 NC NYLON INSERT NUT15 2 046110 3/8 - 16 NC X 1 GRADE 5 BOLT16 2 044080 3/8 - 16 NC TOPLOCK NUT17 2 046105 3/8 - 16 NC X 3/4 GRADE 5 BOLT18 2 043070 3/8 INTERNAL TOOTH LOCK WASHER19 1 046438 1/4” X 3” QUICK RELEASE PIN20 1 712061 STEEL LANYARD21 4 046010 1/4 - 20 NC X 3/4 GRADE 5 BOLT22 9 044023 1/4 - 20 NC NYLON INSERT NUT23 8 046015 1/4 - 20 NC X 1” GRADE 5 BOLT24 14 047009 1/4” SS FLAT WASHER25 8 041023 #10 X 3/8 SELF TAPPING PLASTIC SCREW26 1 680185* 3" ELECTRIC WINCH TOWER WELDMENT27 1 352050* REMOVEABLE LIGHT BAR 2 5/8” ROUND TOWER WELDMENT28 1 320410* CORD REEL (used on cord reel towers only)29 1 320453 3/16 X 1 3/4 ROLL PIN (used on cord reel towers only)

1 1 620570* TOWER SUPPORT WELDMENT, ELECTRIC WINCH2 1 620545 3/4 PLATED HAIRPIN CLIP3 1 352168 MAST LOCKING BAR, ELECTRIC WINCH4 1 620550 LOCKING KNOB 1/2 - 13 NC X 2 1/8”5 2 047055 1” NARROW RIM PLATED MACHINE BUSHING6 1 047025 1/2” PLATED FLAT WASHER7 1 044048 1/2 - 13 NC NYLON INSERT NUT


ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY

Not for

Rep

roduc

tion


B-4A

ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING

Not for

Rep

roduc

tion




ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING

B-4B

LEGEND: NS= Not Shown ** = Purchase locally

1 2 620084 WIRE ROPE CLIP 3/16"2 1 045040 WIRE ROPE THIMBLE, 1/4"3 1 650438 MAST WIRING - 14/7 X 324" (4-LIGHT)

4 1 3201855 1 352054 STEEL CABLE 7/32" X 26'

NS 650429* ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETEWITH 4-LIGHT LIGHT BAR ASSEMBLY

NS 650343* ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETEWITHOUT LIGHT BAR ASSEMBLY

INSTRUCTIONS FOR REPLACING STEEL CABLES

3/16 X 10'

REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 3" MAST SECTION.REMOVE LIGHT BAR BY REMOVING 4 NUTS ON BAR AND LAY BAR ON GROUND.REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION.REMOVE THE 3" PULLEY AT THE END OF THE 3" MAST SECTION.REMOVE THE 2 5/8" ROUND MAST SECTION.REMOVE ALL BROKEN AND FRAYED CABLE.REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION.REPLACE 2 5/8" ROUND MAST SECTION IN THE 3" MAST SECTION.ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY.WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINKAND REINSTALL WIRE ROPE CLIPS.REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3" MAST SECTION.

7/32 X 26'

REMOVE CABLE FROM WINCH.REMOVE MAST WIRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC)REMOVE TOWER ASSEMBLY FROM TRAILER.REMOVE STOP BOLT AND WASHER.REMOVE 4 NYLON ROLLERS AND 3" PULLEY AT TOP END OF 3" SQUARE SECTION.REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER.REMOVE 2 1/2" PULLEY FROM END OF 4" SECTION.REMOVE ALL BROKEN AND FRAYED CABLE.REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION ANDTHROUGH PULLEY BRACKETS.REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS.REPLACE 3" PULLEY AND 4 NYLON ROLLERS.REPLACE STOP BOLT AND WASHER.RUN NEW CABLE ON OUTSIDE OF 4" SECTION.REPLACE 2 1/2" PULLEY.REPLACE TOWER ASSEMBLY ON TRAILER.REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC)RUN NEW CABLE THROUGH PULLEY BRACKETS IN FRONT OF TRAILER.ATTACH CABLE TO ELECTRIC WINCH.WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.


Not for

Rep

roduc

tion


11

4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY

B-5A

Not for

Rep

roduc

tion




352042* LIGHT BAR ASSEMBLY, 4-LIGHT1 10 ** 1/4 - 20 NC X 1/2 CARRIAGE BOLT2 4 ** 3/4 - 10 NC NYLON INSERT NUT3 8 ** 3/4 FLAT WASHER4 1 620537* LIGHT BAR COVER PLATE5 1 650319* LIGHT BAR FRAME ONLY6 10 ** 1/4 - 20 NC KEPS NUT7 1 310033 CORD GRIP NUT - METAL7A 1 022039 1/2" BUSHING8 4 ** 5/16 - 18 NC KEPS NUT9 1 711029 LOCKING HOLE PLUG10 4 310414 LAMP CONNECTOR, FEMALE

NS 022020 3/8” 2 SCREW ROMEX CLAMP11 1 620514* 2 5/8 ROUND TOWER SECTION (Manual removeable light bar)

1 352050* 2 5/8 ROUND TOWER SECTION (Electric removeable light bar)

B-5B


LEGEND: NS = Not Shown ** =Purchase locally

4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY

Not for

Rep

roduc

tion

NIGHT-LITE PRO SERIESTRAILER ASSEMBLY PARTS AND ACCESSORIES

C-1A

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-1B



2 1 650235 SIDE CRANK JACK, SNAP RING (SHOWN)1 680558 SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN)1 680879 TOP CRANK JACK, TUBE MOUNT (NOT SHOWN)1 330013 JACK LOCK PIN (USE WITH 680558 and 680879)

3 1 330014 JACK SNAP RING 2 5/16 XT (USE WITH 650235)4 2 049040 SAFETY CHAIN SET6 2 650297 FENDER, MOLDED BLACK7 2 712116* SPOKE WHEEL8 10 047010 5/16 FLAT WASHER9 10 044031 5/16 - 16 NC KEPS NUT10 2 650387* SPOKE WHEEL AND 13" TIRE11 1 650100 AXLE ASSEMBLY12 1 032026 AXLE MOUNTING HARDWARE KIT13 10 046050 5/16 - 18 NC X 1 CARRIAGE BOLT14 1 024002 12 VOLT BATTERY15 1 713098 NEGATIVE BATTERY CABLE - 36"

1 027025 NEGATIVE BATTERY CABLE - 48" (PERKINS)16 1 027025 POSITIVE BATTERY CABLE - 48"17 2 044031 5/16 -18 NC NYLON INSERT NUT18 1 340017 NYLON BATTERY HOLD DOWN19 2 433507 J-BOLT 5/16 X 11 “20 330012A JACK HOLE PIN KIT21 650169 COUPLING KITNS 712111B BEARING SETNS 712111 AXLE HUB (INCLUDES RACES AND BEARING SET)NS 330009 JACK MOUNTING BRACKET WITH SNAP RINGNS 650236 PLASTIC JACK CAP

Not for

Rep

roduc

tion


C-1C

12

13

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-1D


NO REQ’D PART NO DESCRIPTION1 1 650235 SIDE CRANK JACK, SNAP RING (SHOWN)

1 680558 SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN) 1 680879 TOP CRANK JACK, TUBE MOUNT (NOT SHOWN) 1 330013 JACK LOCK PIN (USE WITH 680558 and 680879) 1 330014 JACK SNAP RING 2 5/16 XT (USE WITH 650235)

2 2 046250 5/8 -11 NC X 4 1/2 GRADE 5 BOLT3 2 046160 7/16 -14 NC X 1 1/2 GRADE 5 BOLT4 2 049040 SAFETY CHAIN WITH S HOOK AND KEEPER5 2 044061 5/8 -11 NC TOPLOCK NUT6A 1 712540-20 HITCH CHANNEL WITH PINTLE

(After Nov. 1, 2004 S/N 0273PRO05 Cast Galvanized)7 2 046220 1/2 -13 INC X 4 GRADE 5 BOLT8 1 712021 BALL COUPLER ONLY9 2 044062 1/2 -13 NC TOPLOCK NUT10 4 047015 3/8 FLAT WASHER11 2 044043 7/16 -14 NC NYLON LOCK NUT

12 2 712552 HITCH PLATE13 650398-20 REMOVEABLE TONGUE/SNAP RINGNS 651225-20 REMOVEABLE TONGUE/TUBE MOUNT

(After Sept. 25, 2006 S/N 2310PRO006)

Not for

Rep

roduc

tion


C-2A ISUZU 3LB1

Not for

Rep

roduc

tion





LEGEND: NS= Not Shown


ISUZU 3LB1

1 2 330012 REPLACEMENT HANDLE2 2 330010 LONG JACK3 2 330014 JACK SNAP RING 2 5/16 XT4 2 650115* OUTRIGGER (LEFT AND RIGHT)5 8 047009 1/4FLATWASHER STAINLESS STEEL6 4 044023 1/4-20 NC NYLON INSERT NUT7 2 041075 5/16-18 NC X 3/4 SELF-TAPPING SCREW8 4 044036 3/8-16 NC KEPS NUT9 12 047010 5/16 FLAT WASHER10 1 @@ RADIATOR11 1 ** RADIATOR CAP12 2 650129 TAIL LIGHT13 4 046110 5/16-18 NC X 1 GRADE 5 BOLT14 1 650112* REAR TOWER SUPPORT15 1 045145 1/4 X 1 1/2 ROLL PIN16 1 330450 REAR TOWER SUPPORT PIN17 1 650210* REAR PANEL, ISUZU 1” R18 4 046010 1/4-20 NC X 3/4 STAINLESS STEEL BOLTS19 1 330012A REPLACEMENT JACK HOLE PIN KIT20 6 045110 3/16 ALUMINUM RIVET21 4 044033 5/16 - 18 NC NYLON INSERT NUT22 4 046050 5/16 - 18 X 1 GRADE 5 BOLT23 1 650722 LEFT OUTRIGGER RETENTION PIN24 1 650723 RIGHT OUTRIGGER RETENTION PIN

@@ = Contact local Isuzu Dealer** = Purchase locally

Not for

Rep

roduc

tion


TRAILER ASSEMBLY PARTS AND ACCESSORIES

C-2CKUBOTA D905-BG

Not for

Rep

roduc

tion







KUBOTA D905-BG

1 2 330012 REPLACEMENT HANDLE 2 2 330010 LONG JACK 3 2 330014 JACK SNAP RING 2 5/16 XT 4 2 650115* OUTRIGGER (LEFT AND RIGHT) 5 1 920472 COOLANT OVERFLOW TANK 6 8 047009 ¼” FLATWASHER 7 4 044023 1/4-20 NC NYLON INSERT NUT 8 2 041075 5/16-18 NC X 3/4 SELF-TAPPING SCREW 9 4 044036 3/18-16 NC KEPS NUT10 14 047010 5/16 FLAT WASHER11 1 Call Factory RADIATOR12 1 ** RADIATOR CAP13 2 650129 TAIL LIGHT14 4 046110 3/8 - 16 NC X 1 GRADE 5 BOLT15 1 650112* REAR TOWER SUPPORT16 1 045145 1/4 X 1 1/2 ROLL PIN17 1 330450 REAR TOWER SUPPORT PIN18 1 650283* REAR PANEL, 1 “ R19 4 046010 1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL20 1 330012A REPLACEMENT JACK HOLE PIN21 2 ** CABLE TIE22 6 045110 3/16 ALUMINUM RIVET23 4 044033 5/16 -18 NC NYLON INSERT NUT24 4 046050 5/16-18 X 1 GRADE 5 BOLT

25 1 650722 LEFT OUTRIGGER RETENTION PIN 26 1 650723 RIGHT OUTRIGGER RETENTION PIN

Not for

Rep

roduc

tion


C-2EPERKINS 103.10/LOMBARDINI LDW 903

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-2F



1 330012 REPLACEMENT HANDLE2 2 330010 LONG JACK3 2 330014 JACK SNAP RING 2 5/16 XT4 2 650115* OUTRIGGER (LEFT AND RIGHT)5 8 047009 ¼” FLAT WASHER6 4 044023 1/4-20 NC NYLON INSERT NUT7 2 041075 5/16-18 NC X 3/4 SELF-TAPPING SCREW8 10 047010 5/16 FLAT WASHER9 2 650129 TAIL LIGHT10 1 650112* REAR TOWER SUPPORT11 1 045145 1/4 X 1 1/2 ROLL PIN12 1 330450 REAR TOWER SUPPORT PIN13 1 650283* REAR PANEL, 1 “ R PERKINS/CAT

1 650767* REAR PANEL, 1 “ R LOMBARDINI14 4 046010 1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL15 1 330012A REPLACEMENT JACK HOLE PIN KIT16 6 045110 3/16 ALUMINUM RIVET17 4 044033 5/16 -18 NC NYLON INSERT NUT18 4 046050 5/16 - 18 X 1 GRADE 5 BOLT19 1 650722 LEFT OUTRIGGER RETENTION PIN20 1 650723 RIGHT OUTRIGGER RETENTION PIN

PERKINS 103.10/LOMBARDINI LDW 903

Not for

Rep

roduc

tion



C-2GREAR PANEL WITH TOWER LIMIT SWITCH

CABLE ELECTRIC ONLY

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-2H



REAR PANEL WITH TOWER LIMIT SWITCH

1 1 650435 REAR LIMIT SWITCH2 1 650432 REAR LIMIT SWITCH WIRING HARNESS3 1 022136 5/8 SNAP BUSHING4 1 650434-15 LIMIT SWITCH ACTUATOR CAM5 1 330450 REAR TOWER SUPPORT PIN6 1 045145 1/4 X 1 1/2 ROLL PIN7 1 022020 2-SCREW ROMEX CLAMP, 3/88 1 650112* REAR TOWER SUPPORT9 3 022016A 3/8 CUSHION CLAMP (BOLT HOLE 3/8)10 1 022016 3/8 CUSHION CLAMP (BOLT HOLE 1/4)11 1 650433* REAR LIMIT SWITCH COVER12 1 046040 1/4 - 20 NC X 5 GRADE 5 BOLT13 2 041006 #6 - 32 X 1 1/4 BOLT14 2 046110 3/8 - 16 NC X 1 1/4 GRADE 5 BOLT15 1 046050 5/16 - 18 NC X 1 GRADE 5 BOLT16 4 047010 5/16 FLAT WASHER17 2 044036 3/8- 16 NC KEPS NUT18 1 044033 5/16 -18 NC NYLON INSERT NUT19 2 044023 ¼ -20 NC NYLON INSERT NUT20 1 046015 ¼ -20 NC X 1 GRADE 5 BOLT21 1 047009 1/4 STAINLESS STEEL FLAT WASHER22 2 041017 #6 - 32 NC X 3/8 BOLT23 2 044004 #6 - 32 NC KEPS NUT24 2 044004 #6 - 32 NC KEPS NUT25 1 041050 1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW

(STAINLESS STEEL)26 2 043050 1/4 INTERNAL TOOTH LOCK

CABLE ELECTRIC ONLY

Not for

Rep

roduc

tion


C-2IISUZU 3LB1

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-2J



ISUZU 3LB1

1 1 650267* ISUZU RADIATOR SUPPORT SHROUD (RIGHT)2 1 650268* ISUZU RADIATOR SUPPORT SHROUD (RIGHT)3 1 @@ ISUZU RADIATOR WITH SHROUD4 1 @@ ISUZU RADIATOR FAN GUARD5 4 046050 5/16 - 18 NC X 1 GRADE 5 BOLT6 4 047010 5/16 FLAT WASHER7 4 044031 5/16 - 18 NC KEPS NUT8 4 042082 M8 HEXNUT9 4 042030 M8 X 20 GRADE 8.8 BOLT10 4 ** M8 FLAT WASHER11 4 ** M8 SPLIT LOCK WASHER

@@ =Contact local Isuzu DealerNot for

Rep

roduc

tion


C-2KKUBOTA D905-BG

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-2L



KUBOTA D905-BG

1 1 650168 KUBOTA FAN GUARD2 7 041015 #8 X 5/8 HW TEKS SCREW3 1 Call Factory RADIATOR

Not for

Rep

roduc

tion


C-3A

Not for

Rep

roduc

tion






NO REQ’D PART NO DESCRIPTION1 18 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL2 32 047009 1/4 STAINLESS STEEL FLAT WASHER3 1 650206* RIGHT SIDE FRONT PANEL, 1" R4 12 044023 1/4 - 20 NC NYLON INSERT NUT5 1 650207* LEFT SIDE FRONT PANEL, 1" R6 8 045216 TINNERMAN FASTENER7 4 046110 3/8 -16 NC X 1 GRADE 5 BOLT8 2 046115 3/8 - 16 NC X 1 1/4 GRADE 5 BOLT9 16 047010 5/16 FLAT WASHER10 1 650111* TOWER PIVOT11 6 044036 3/8 - 16 NC KEPS NUT12 1 650113* TOWER/ROOF BRACE13 1 650266* ROOF PANEL, ISUZU/PERKINS 1” R

1 650277* ROOF PANEL, KUBOTA 1" R W/BOX MUFFLER1 650565* ROOF PANEL, LOMBARDINI/DEUTZ 1” R

14 4 044033 5/16-18 NC NYLON INSERT NUT15 2 046010 1/4-20 NC X 1 GRADE 5 BOLT16 4 046050 5/16-18 NC X 1 GRADE 5 BOLT17 1 650112* REAR TOWER SUPPORT18 1 650210* REAR PANEL, ISUZU 1 “R

1 650283* REAR PANEL, KUBOTA/PERKINS 1" R1 650767* REAR PANEL, LOMBARDINI 1" R

19 2 041021 #10 - 24 NC X 1/2 SCREW20 2 330481 GROUND ROD CLIP21 2 044016 #10 - 24 NC KEPS NUT22 1 340058 GROUND ROD23 1 640555(NS) BLACK PLUG - 2.0" (PERKINS)24 1 330037 3" STICK-ON RED REFLECTOR CAL. SPEC.

Not for

Rep

roduc

tion



C-4A

Not for

Rep

roduc

tion






NO REQ’D PART NO DESCRIPTION1 2 660170 POSITIVE DOOR HOLDER2 4 041026 #10 - 24 NC X 3/4 FLAT HEAD SCREW3 2 650131 LOCKING T-HANDLE4 16 041021 #10 - 24 NC X 1/2 ROUND HEAD SCREW5 2 650209* DOOR 1" R, RIGHT AND LEFT6 4 041027 #10 - 24 NC X 3/4 ROUND HEAD SCREW8 20 044019 #10 - 24 NC NYLON INSERT NUT9 2 650211 DOOR HINGE 1" R

2 650425 DOOR HINGE (UNIVERSAL)10 4 041050 1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW

(STAINLESS STEEL)11 1 650266* ROOF PANEL. ISUZU/PERKINS 1" R

1 650277* ROOF PANEL, KUBOTA 1" R W/BOX MUFFLER1 650565* ROOF PANEL, LOMBARDINI/DEUTZ 1” R

12 8 044023 1/4 - 20 NC NYLON INSERT NUT13 4 041250 1/4-20 x 1/2 SLOTTED HEAD NYLON BINDER SCREW14 1 650210* REAR PANEL, ISUZU 1" R

1 650283* REAR PANEL, KUBOTA/PERKINS 1" R1 650767* REAR PANEL, LOMBARDINI 1" R

15 2 650132 LATCH CAM, W/SQ HD SET SCREW16 1 022035 CORD GRIP NUT17 1 310033 CORD GRIP18 1 650206* RIGHT SIDE FRONT PANEL, 1" R19 1 650207* LEFT SIDE FRONT PANEL, 1" R20 4 044016 #10 - 24 NC KEPS NUT21 16 045110 3/16 STEEL RIVETS22 1 640555 (NS) BLACK PLUG - 2.0” (PERKINS)NS 1 650376 NL PRO SOUND ATTENUATION KIT

Not for

Rep

roduc

tion


C-5A

Not for

Rep

roduc

tion







1 1 022025 3/4 2-SCREW CORD CLAMP2 2 046036 1/4 - 20 NC X 2 1/2 GRADE 5 BOLT3 4 310391 28 uFCAPACITOR4 2 610570* DUAL CAPACITOR MOUNTING CLAMP

NS 2 650443* DUAL CAPACITOR MOUNTING CLAMP (HPS)5 2 044023 1/4 - 20 NC NYLON INSERT NUT6 4 310124 TRANSFORMER ONLYNS 4 310118 TRANSFORMER, CAPACITOR, AND STARTER (HPS)7 16 041070 1/4 - 20 NC SELF-TAPPING SCREW8 1 043050 1/4 INTERNAL TOOTH LOCK WASHER9 2 ** #6 - 32 NC X 3/4 ROUND HEAD SCREW10 1 045003 ¼ - 20 NC X 1 1/2 STUD11 2 650104 25 AMP BREAKER SWITCHNS 4 330458 15 AMP BREAKER SWITCH (OPTIONAL)12 3 044021 1/4 - 20 NC KEPS NUT13 1 330494 1/4 - 20 NC WING NUT14 4 041017 #6 - 32 NC X 3/8 ROUND HEAD SCREW15 1 650105 15 AMP POP-OUT CIRCUIT BREAKER16 1 630132A 120V. GFCI RECEPTACLE

NS 1 330432 RECEPTACLE COVER FOR GFCI RECEPTACLE17 1 022036 3/4" STEEL LOCKNUT18 3 433329 5/8 CAP PLUGNS 330459 C.B. SWITCH, 15 AMP DP19 1 064035 1 1/2 X 7 GA. CAP PLUGNS 330490 RECEPTACLE 240V. 15A20 1 330458 15 AMP BREAKER SWITCH (CABLE ELECTRIC ONLY)

Not for

Rep

roduc

tion



C-5C

Not for

Rep

roduc

tion







1 15 044016 #10 - 24 NC KEPS NUT2 7 044014 #10 - 24 NC BRASS HEX NUT3 11 043015 #10 INTERNAL TOOTH LOCK WASHER4 1 310120 BALLAST TERMINAL BOARD5 7 043015 #10 EXTERNAL TOOTH LOCK WASHER6 6 041030 #10 - 24 NC X 1 MACHINE SCREW7 1 041035 #10 - 24 NC X 1 1/4 MACHINE SCREW8 4 022185 NYLON SPACER9 4 041045 #10 - 24 NC X 2 1/2 MACHINE SCREW

Not for

Rep

roduc

tion


C-6A

GAUGE PANEL MANUAL WINCH

Not for

Rep

roduc

tion







1 1 920474 IGNITION KEY (EXTRA)1 650219 IGNITION KEY (ISUZU) PAIR ROUND TYPE1 922005 IGNITION KEY (ISUZU) PAIR BLADE TYPE1 ** IGNITION KEY (PERKINS)

2 1 @@@ GLOW PLUG LAMP1 @@ GLOW PLUG LAMP (ISUZU)1 @@@@ GLOW PLUG LAMP (PERKINS)

3 1 340014 HOUR METER4 3 041078 1/4 - 20 NC X 1/2 ROUND HEAD SCREW5 1 650125* INSTRUMENT PANEL

1 650196* INSTRUMENT PANEL (ISUZU)1 650282* INSTRUMENT PANEL (PERKINS)

6 1 @@@ GLOW LAMP TIMERNS 1 @@@@ REGULATOR (PERKINS)7 6 044021 1/4 - 20 NC KEPS NUT8 2 043050 1/4 INTERNAL TOOTH LOCK WASHER9 2 043010 1/4 - 20 NC X 3/4 GRADE 5 BOLT10 1 920475 KEY SWITCH W/2 KEYS

1 922004 KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE1 @@@@ KEY SWITCH W/2 KEYS (PERKINS)

11 1 310212 5/8 CUSHION CLAMP12 2 041070 1/4 - 20 NC SELF-TAPPING SCREW13 1 650363* GAUGE PANEL COVER

@@@ = See Kubota Dealer@@ = See Isuzu Dealer

@@@@ = See Perkins Dealer

GAUGE PANEL MANUAL WINCH

Not for

Rep

roduc

tion


C-6C

GAUGE PANEL ELECTRIC WINCH

Not for

Rep

roduc

tion






GAUGE PANEL ELECTRIC WINCH

1 1 920474 IGNITION KEY (EXTRA)1 650219 IGNITION KEY (ISUZU) PAIR ROUND TYPE1 922005 IGNITION KEY (ISUZU) PAIR BLADE TYPE1 ** IGNITION KEY (PERKINS)

2 1 @@@ GLOW PLUG LAMP1 @@ GLOW PLUG LAMP (ISUZU)1 @@@@ GLOW PLUG LAMP (PERKINS)

3 1 340014 HOUR METER4 1 310544 DPDT MOMENTARY CONTACT SWITCH5 1 352466 2 AMP CIRCUIT BREAKER6 1 650125* INSTRUMENT PANEL (KUBOTA)

1 650196* INSTRUMENT PANEL (ISUZU)1 650282* INSTRUMENT PANEL (PERKINS)

7 1 @@@ GLOW LAMP TIMER1 @@@@ REGULATOR (PERKINS)

8 3 041078 1/4 - 20 NC X 1/2 ROUND HEAD SCREW9 5 044021 1/4 - 20 NC KEPS NUT10 2 043050 1/4 INTERNAL TOOTH LOCK WASHER11 2 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL12 1 920475 KEY SWITCH W/2 KEYS

1 922004 KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE1 @@@@ KEY SWITCH W/2 KEYS (PERKINS)

13 1 310212 5/8 CUSHION CLAMP14 2 041070 1/4 - 20 NC SELF-TAPPING SCREW15 1 650363* GAUGE PANEL COVER16 1 630157A BRIDGE ASSEMBLY17 1 ** #10 - 24 NC X 3/4 ROUND HEAD SCREW18 1 044016 #10 - 24 NC KEPS NUT19 1 022020 2 - SCREW ROMEX CLAMP, 3/8


@@@ = See Kubota Dealer@@ = See Isuzu Dealer


Not for

Rep

roduc

tion


C-6E

GAUGE PANEL, LOMBARDINI

Not for

Rep

roduc

tion






GAUGE PANEL, LOMBARDINI

1 4 041070 1/4 - 20 X 3/4 SELF-TAPPING SCREW2 1 @@@@@ LOMBARDINI CONTROL BOX3 1 340014 HOUR METER4 2 ** M5 X .80mm x 12mm MACHINE SCREW5 2 043017 #10 INTERNAL TOOTH LOCK WASHER6 4 044021 1/4 - 20 NC KEPS NUT7 1 650761 LOMBARDINI CONTROL PANEL BRACKET8 1 020021 #10 CUSHION CLAMP


@@@@@ = See Lombardini Dealer

Not for

Rep

roduc

tion


C-6G

PERKINS CONTROL PANEL

Not for

Rep

roduc

tion






PERKINS CONTROL PANEL



3 1 921433 GLOW PLUG LAMP4 8 044021 1/4 - 20 NC KEPS NUT5 1 650446 REGULATOR7 3 041078 1/4 - 20 NC X 1/2 ROUND HEAD SCREW8 1 340014 HOUR METER9 1 650282* INSTRUMENT PANEL, PERKINS KEY10 1 650307 IGNITION KEY, EXTRA11 1 650363* GAUGE PANEL COVER12 2 041070 1/4 - 20 NC SELF-TAPPING SCREW13 1 310212 5/8 CUSHION CLAMP14 2 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT15 1 650306 KEY SWITCH W/2 KEYS (PERKINS)16 2 043050 1/4 INTERNAL TOOTH LOCK WASHER17 1 650302 AUTO SHUTDOWN TIMERNS 1 650139 30 AMP CIRCUIT BREAKER

Not for

Rep

roduc

tion


C-7AFUEL TANK AND MANUAL WINCH

Not for

Rep

roduc

tion







1 1 340027 FUEL FILLER CAP2 1 650108 POLY FUEL TANK 30 GALLON3 2 650108 1/4 - 20 NC X 1-3/4 GRADE 5 HEX BOLT4 2 044023 1/4 - 20 NC NYLON INSERT NUT5 1 650470 WINCH HANDLE6 1 650469 WINCH EXTENSION TUBE7 1 660144 WINCH DRIVE HUB8 1 650106 NYLON WINCH GUIDE9 3 044021 1/4 - 20 NC KEPS NUT10 2 041050 1/4 - 20 NC X 3/4 TRUSS HEAD PHILLIPS SCREW11 4 047010 5/16 FLAT WASHER12 2 044031 5/16 - 18 NC KEPS NUT13 1 610531 WINCH, PLATED14 1 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT15 1 320112 2-1/2 PULLEY W/BUSHING16 1 044048 1/2 -13 NC NYLON INSERT NUT17 6 047007 1/4-1 1/4 FENDER WASHER18 6 043050 1/4 INTERNAL TOOTH LOCK WASHER19 6 046005 1/4 - 20 NC X 1/2 GRADE 5 HEX BOLT20 1 630555* KICK-OUT SPRING21 2 046110 3/8 - 16 NC X 1 GRADE 5 BOLT22 2 044036 3/8 - 16 NC KEPS NUT23 2 046050 5/16 -18 NC X 1 GRADE 5 BOLT24 1 650621 KICKOUT SPRING PAD25 2 045118 1/4” RIVET26 2 047100 5/16 FLAT WASHER (STAINLESS)27 1 047009 1/4 SAE FLAT WASHER (STAINLESS)28 1 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT29 1 650136 WINCH HANDLE KIT (INCLUDES #5, 6, &7)

FUEL TANK AND MANUAL WINCH

Not for

Rep

roduc

tion


C-7CFUEL TANK AND ELECTRIC WINCH

Not for

Rep

roduc

tion







FUEL TANK AND ELECTRIC WINCH

1 5 046110 3/8 - 16 NC X 1 GRADE 5 BOLT2 5 047010 5/16 FLAT WASHER3 1 352089* KICK-OUT SPRING4 1 340027 FUEL FILLER CAP5 1 650108 POLY FUEL TANK6 2 047010 1/4 20 NC X 1/2 CARRIAGE BOLT7 1 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT8 1 044048 1/2 - 13 NC NYLON INSERT NUT9 1 320112 2 1/2 PULLEY W/BUSHING10 2 044021 1/4 - 20 NC KEPS NUT11 1 352056* SLACK LIMIT SWITCH BRACKET12 5 044036 3/8 - 16 NC KEPS NUT13 1 466093 SLACK LIMIT SWITCH14 2 041006 #6 - 32 NC X 1 1/4 ROUND HEAD SCREW16 2 044006 #6 - 32 NC KEPS NUT17 1 630157 STRONG ARM ELECTRIC WINCH17A 1 EMERGENCY WINCH HANDLE18 6 047007 1/4 X 1 1/4 FENDER WASHER19 6 046005 1/4 - 20 NC X 1/2 GRADE 5 BOLT20 6 043050 1/4 INTERNAL TOOTH LOCK WASHER21 1 650431* ELECTRIC WINCH COVER22 1 022019 CUSHIONED CLAMP 7/823 4 041075 5/16 - 18 NC SELF-TAPPING SCREW23 6 044023 1/4 - 20 NC NYLON INSERT NUTNS 1 081016 1/4 FUEL HOSE 48”NS 1 081005 NYLON RETURN FUEL HOSE, 36”

Not for

Rep

roduc

tion


C-8A

Not for

Rep

roduc

tion







1 2 650263 AIR CLEANER BAND2 6 044031 5/16 -18 NC KEPS NUT3 4 042027 8mm X 20mm X 1.25 GRADE 10.9 BOLT4 3 045038 HOSE CLAMP #325 1 650272 AIR INTAKE HOSE6 3 ** 5/16 INTERNAL TOOTH LOCK WASHER7 1 ** 1/4 FLAT WASHER8 1 650291* AIR CLEANER MOUNT BRACKET, PRO10 8 046050 5/16-18 NC X 1”GRADE 5 BOLT11 1 022025 2-SCREW ROMEX CONNECTOR 3/4NS 1 022036 3/4" STEEL LOCKNUT12 1 ** CAP PLUG13 1 920745 KUBOTA FUEL FILTER14 1 046055 5/16 - 18 NC X 1 1/4 GRADE 5 BOLT15 1 @@@ FUEL FILTER MOUNTING PLATE16 4 046134 3/8 - 16 NC X 2 1/2 GRADE 5 BOLT17 2 650114* ENGINE MOUNT18 9 042038 10mm X 20mm X 1.25 GRADE 8.8 BOLT19 1 046050 5/16 - 18 NC X 1 GRADE 5 BOLT20 2 047009 5/16 FLAT WASHER

@@@ = See local Kubota DealerNot for

Rep

roduc

tion


C-8A CONT.

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-8B CONT.



21 1 340105 GROUND STRAP22 8 650274 ENGINE MOUNT WASHER23 4 650259 RUBBER ENGINE MOUNT24 2 046110 3/8 - 16 NC X 1” GRADE 5 BOLT25 4 044038 3/8 -16 NC NYLON INSERT NUT26 1 330463 RUBBER GROMMET27 2 043065 3/8 SPLIT LOCK WASHER28 1 650265* GENERATOR MOUNT29 1 920743 KUBOTA OIL FILTER30 8 047016 3/8 FLAT WASHER S.A.E.31 4 043055 5/16 SPLIT LOCK WASHER32 4 042018 6mm X 10mm X 1.0 GRADE 8.8 BOLTNS 1 651232 MUFFLER33 1 352139 KUBOTA BOX MUFFLER KIT34 1 650262 AIR CLEANER36 2 043055 5/16 SPLIT LOCK WASHER38 1 046105 3/8 - 16 NC X 3/4 GRADE 5 BOLT39 1 352135 EXHAUST MANIFOLD MUFFLER GASKET40 4 650260 SNUBBING WASHER41 8 044033 5/16-18 NC NYLON INSERT NUT42 8 047010 5/16 FLAT WASHER43 1 650289 BOX MUFFLER EXHAUST PIPE44 1 650296 BOX MUFFLER EXHAUST PIPE BRACKET45 1 713086 1-3/8 MUFFLER CLAMP (for box muffler ex. pipe)NS 1 340036 REPLACEMENT AIR FILTERNS 1 081018 5/16 FUEL LINE 14"NS 1 081018 5/16 FUEL LINE 10"NS 1 650154 UPPER RADIATOR HOSENS 1 650153 LOWER RADIATOR HOSENS 1 650171 ENGINE MOUNT SPACER_

@@@ = See local Kubota Dealer

Not for

Rep

roduc

tion


C-8CISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY

Not for

Rep

roduc

tion







@@@@ = See local Perkins Dealer@@@ = See local Isuzu Dealer

1 1 650191 ISUZU 3LB11 352160 PERKINS 103.10

2 1 650264 AIR CLEANER BRACKET1 @@@@ AIR CLEANER BRACKET

3 1 650263 AIR CLEANER POLYMER BAND CLAMP@@@@ AIR CLEANER POLYMER BAND CLAMP

4 1 650262 AIR CLEANER ASSEMBLY@@@@ AIR CLEANER ASSEMBLY

5 1 ** AIR CLEANER INLET HOSE@@@@ AIR CLEANER INLET HOSE

6 2 045038 #32 HOSE CLAMP7 2 650114* ENGINE MOUNT FOOT (ISUZU)

2 650281* ENGINE MOUNT FOOT (PERKINS)8 4 650259 RUBBER ENGINE MOUNT9 1 650265* GENERATOR MOUNT PLATE10 10 046050 5/16 -18 NC X 1 GRADE 5 BOLT11 8 047010 5/16 FLAT WASHER12 8 044033 5/16-18 NC NYLON INSERT NUT13 2 044031 5/16-18 NC KEPS NUT14 4 046134 3/8-16 NC X 2.5 GRADE 8 BOLT15 4 047015 3/8 FLAT WASHER16 4 650274 ENGINE MOUNT WASHER17 4 650260 SNUBBING WASHER18 4 044038 3/8 -16 NC NYLON INSERT NUT19 8 042038 M 10 X 20 GRADE 8.8 BOLT

8 ** M12-1.25 X 20 GRADE 10.9 BOLT (PERKINS)20 2 047016 3/8FLAT WASHER S.A.E.

NS 650220 ISUZU FUEL FILTERNS 650221 ISUZU OIL FILTERNS 920878 ISUZU GLOW PLUGS

ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY

Not for

Rep

roduc

tion


C-8C CONT.


Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-8D CONT.



@@@@ = See local Perkins Dealer@@@ = See local Isuzu Dealer

21 2 046110 3/8 - 16 NC X 1” GRADE 5 BOLT22 2 043065 3/8 SPLIT LOCK WASHER23 2 042027 M8 X 16 GRADE 5 BOLT24 7 043055 5/16 SPLIT LOCK WASHER25 1 042082 M8 HEX NUT26 NS 081016 1/4 FUEL HOSE27 NS 081005 NYLON RETURN FUEL HOSE28 NS @@@ UPPER RADIATOR HOSE

NS @@@@ UPPER RADIATOR HOSE29 NS @@@ LOWER RADIATOR HOSE

NS @@@@ LOWER RADIATOR HOSE30 NS @@@ EXHAUST MANIFOLD MUFFLER GASKET

NS @@@@ EXHAUST MANIFOLD MUFFLER GASKET31 NS 650225 MUFFLER PRO - ISUZU

NS 651232 MUFFLER - CAT32 NS @@@ M8 X 25 GRADE 8.8 BOLT


Not for

Rep

roduc

tion


C-8ELOMBARDINI ENGINE/GENERATOR ASSEMBLY

Not for

Rep

roduc

tion






@@@@@ = See local Lombardini Dealer

1 1 650592 GENERATOR 6 KW PG100350 GENERATOR 7.5 KW MECC ALTE

2 4 046134 3/8-16 NC X 2.5 GRADE 8 BOLT3 4 047015 3/8 FLAT WASHER4 1 650563* GENERATOR MOUNT PLATE5 8 046050 5/16 -18 NC X 1 GRADE 5 BOLT6 4 650259 RUBBER ENGINE MOUNT7 8 044033 5/16-18 NC NYLON INSERT NUT8 4 650260 SNUBBING WASHER9 4 044038 3/8 -16 NC NYLON INSERT NUT10 4 650274 ENGINE MOUNT WASHER11 8 047010 5/16 FLAT WASHER12 2 046095 3/8-16 NC X 1/2 GRADE 5 BOLT13 2 043065 3/8 SPLIT LOCK WASHER14 2 047008 1/4 SS FLAT WASHER15 1 650562-01 ENGINE MOUNT BRACKET16 6 042018 6MM X 16MM X 1.0 GRADE 8.8 BOLT17 2 650567-01 RADIATOR SHROUD18 4 044021 1/4-20 NC KEPS NUT19 4 041078 1/4-20 X 1/2 TRUSS HEAD BOLT20 1 650830 LOMBARDINI LDW 903 ENGINE21 1 651236 MUFFLERNS 1 081016 FUEL LINE 48”NS 1 081005 NYLON RETURN LINE 55”NS 1 ** GAUGE PANEL ENGINE HARNESS ASSEMBLYNS 1 ** ENGINE WIRING HARNESS ONLY

LOMBARDINI ENGINE/GENERATOR ASSEMBLY


Not for

Rep

roduc

tion



C-8G3011C CAT ENGINE/GENERATOR ASSEMBLY WITH REAR EXHAUST EXIT

Not for

Rep

roduc

tion






1 1 352097 CAT 3011C D RATE 6KW ENGINE1 352236 CAT 3011C NON-D RATE 8KW ENGINE

2 1 651164 CAT 3011C REAR PANEL, PRO, REAR EXHAUST3 1 650851 CAT 3011C MUFFLER BY STANLEY4 1 650850 STANLEY MUFFLER, 10” TAILPIPE5 1 651166 MUFFLER BRACKET, CAT 3011C, REAR EXHAUST6 4 042027 8MM X 16MM X 1.25 HEX BOLT7 8 043055 5/16” PLATED SPLIT LOCK WASHERS8 4 042031 8MM X 25MM X 1.25 HEX BOLT9 1 340112-2 1-1/2” MUFFLER CLAMP BASE10 1 340112-3 1-1/2” MUFFLER CLAMP BOLT11 2 043065 3/8” SPLIT LOCK WASHER12 2 044035 3/8-16 PLATED HEX NUT13 2 ** CAT 3011C MUFFLER GASKET14 1 ** CAT 3011C MUFFLER SPACER

1 651012 GENERATOR MOUNT651012 6KW BALDOR GENERATOR640144 8KW BALDOR GENERATOR

3011C CAT ENGINE/GENERATOR ASSEMBLY WITH REAR EXHAUST EXIT


Not for

Rep

roduc

tion


C-8I

Not for

Rep

roduc

tion




TRAILER ASSEMBLY PARTS AND ACCESSORIESC-8J



1 1 650398* REMOVABLE TONGUE WELDMENT2 2 046230 1/2-13 NC x 5" GRADE 8 BOLT3 4 047025 ½ FLAT WASHER4 2 044048 1/2-13 NC NYLON INSERT HEX NUT

Not for

Rep

roduc

tion


THIS PAGE LEFT BLANK INTENTIONALLY

Not for

Rep

roduc

tion




DECALSD-1A

1 090165 DECAL - DANGER ELECTRIC SHOCK1 090177 ALIGNMENT ARROW1 090034 DECAL - DIESEL1 090166 DECAL - WARNING OVERHEAD HAZARD1 090284 STRIPE DECAL SET2 090276 NIGHT-LITE DECAL1 090159 DECAL - WARNING COMBUSTIBLE GAS1 090160 DECAL - WARNING EXCESS TOW1 090139 DECAL - LATCH/UNLATCH1 090133 DECAL - GROUND LUG1 090158 DECAL - WARNING OPERATOR’S MANUAL1 090084 DECAL - WARNING SHUT OFF LIGHTS2 090278 PRO SERIES DECAL1 090288 STARTING ENGINE, ISUZU & PERKINS1 090224 STARTING ENGINE, KUBOTA1 090225 PRO PICTORIAL INSTRUCTION1 090163 DECAL - DANGER ELECTIC SHOCK1 090226 DECAL -WARNING ROLL OVER PROTECTION2 090002 DECAL - DANGER HIGH VOLTAGE1 090164 DECAL - WARNING NON-VERTICAL1 090240 DECAL - WARNING FOLD OUTRIGGERS

650158 DECAL SET COMPLETE - PRO2 090256 LARGE ALLMAND DOOR DECAL1 090269 SMALL ALLMAND REAR PANEL DECAL1 090262 ELECTRIC WINCH PICTORIAL OPERATOR (Elec. Winch Only)1 090205 DECAL - RED LATCH (Elec. Winch Only)1 090232 DECAL -ELECTRIC WINCH WARNING (Elec. Winch Only)1 090179 DECAL PROPOSITION 65 DIESEL1 090309 DECAL-SPRING LATCH RELEASE

REQ’D PART NO DESCRIPTION

Not for

Rep

roduc

tion

NIGHT-LITE PRO SERIESKUBOTA D905-BG

E-1A

Not for

Rep

roduc

tion




E-1B

KUBOTA D905-BG

REF# PART NO DESCRIPTION

1 Call Factory RADIATOR2 340302 HIGH TEMPERATURE SWITCH4 650262 AIR CLEANER5 650114* ENGINE MOUNT BRACE (LEFT)

650114* ENGINE MOUNT BRACE (RIGHT)6 920743 KUBOTA OIL FILTER7 340301 OIL PRESSURE SWITCH

NS 340304 KUBOTA D905-BG ENGINENS 640146 MARATHON 6KW GENERATOR NS 640157 MARATHON 8KW GENERATOR (KUBOTA 1105 ONLY)NS 650592 POWRGARD 6KW GENERATORNS 640167 LEROY SUMER 50HZ 6KW GENERATORNS 920745 FUEL FILTERNS 081016 1/4 FUEL LINE 48"NS 081005 NYLON RETURN LINE 55"NS @@@ MUFFLER KITNS 650134 ENGINE WIRING HARNESS

(SEE WIRE SCHEMATIC F-1A)NS 650265* GENERATOR MOUNT PLATENS 650290 REPLACEMENT AIR FILTER ELEMENT

FOR ENGINE PARTS NOT SHOWN, SEE KUBOTA D905 PARTS LIST. FOR GENERATORPARTS NOT SHOWN, SEE MANUFACTURER’S LIST OR CALL 800-562-1373 FOR ASSIS-TANCE.


@@@ = See local Kubota Dealer

Not for

Rep

roduc

tion

NIGHT-LITE PRO SERIESISUZU 3LB1

E-2A

Not for

Rep

roduc

tion




E-2B

ISUZU 3LB1


@@ = See local Isuzu Dealer

REF# PART NO DESCRIPTION

NS @@ RADIATOR1 @@ HIGH TEMPERATURE SWITCH

NS 650261 ISUZU AIR CLEANER BRACKETNS 650262 ISUZU AIR CLEANERNS 650263 ISUZU AIR CLEANER BAND CLAMPNS @@ ISUZU AIR CLEANERAIR INLET HOSENS 650114* ENGINE MOUNT BRACE (LEFT)

650114* ENGINE MOUNT BRACE (RIGHT)2 650221 ISUZU OIL FILTER

NS 650220 ISUZU FUEL FILTERNS 920878 ISUZU GLOW PLUG3 @@ OIL PRESSURE SWITCH4 650191 ISUZU 3LB1 ENGINE (INCLUDES RAD. AND SHROUD)

NS 640146 MARATHON 6KW GENERATORNS 650592 POWRGARD 6KW GENERATORNS 640167 LEROY SUMER 50HZ 6KW GENERATORNS 081016 1/4 FUEL LINE 48"NS 081005 NYLON RETURN LINE 55"NS 650225 MUFFLER KITNS 650240 ISUZU ENGINE WIRING HARNESS

(SEE WIRE SCHEMATIC F-2A)NS 650265* GENERATOR MOUNT PLATE (ISUZU-NEW MOUNTS)

FOR ENGINE PARTS NOT SHOWN, SEE ISUZU 3LB1 PARTS LIST. FOR GENERATORPARTS NOT SHOWN, SEE MANUFACTURES LIST OR CALL 800-562-1373 FOR ASSIS-TANCE.

Not for

Rep

roduc

tion


E-3A

PERKINS 103.10

Not for

Rep

roduc

tion




E-3B

LEGEND: NS= Not Shown ** = Purchase locally @@@@ = See local Perkins Dealer

PERKINS 103.10

1 2 650284* RADIATOR SHROUD, PERKINS, SIDE2 1 @@@@ HIGH TEMPERATURE SWITCH3 1 @@@@ AIR CLEANER DUST CAP4 1 @@@@ AIR CLEANER

NS 1 650303 AIR FILTER ELEMENT5 1 @@@@ AIR CLEANER, MOUNTING BRACKET6 2 650281* ENGINE MOUNT BRACKET7 1 @@@@ AIR INTAKE HOSE8 1 @@@@ OIL PRESSURE SWITCH9 1 @@@@ UPPER RADIATOR HOSE

10 1 @@@@ RADIATOR11 1 @@@@ OIL DRAIN PLUG12 1 650304 OIL FILTERNS 1 650305 FUEL FILTER13 1 352160 PERKINS 103.10 ENGINENS 1 640146 MARATHON 6KW GENERATOR

NS 1 640157 MARATHON 8KW GENERATORNS 1 650592 POWRGARD 6KW GENERATORNS 1 640167 LEROY SUMER 50HZ 6KW GENERATORNS 1 650762 LOMBARDINI LDW 903 ENGINENS 1 650279* RADIATOR SHROUD, PERKINS, UPPERNS 1 650280* RADIATOR SHROUD, PERKINS, LOWERNS 1 030052 TRIM LOCK WITH RUBBER SEALNS 8 ** M 12-1.25 X 20 GRADE 10.9 BOLTNS 8 ** 1/4-20 X.75 STAINLESS STEEL PAN SCREWSNS 8 ** 1/4 SPLIT LOCK WASHERNS 8 ** 1/4-20 NYLON INSERT NUTNS 1 650285 PERKINS ENGINE WIRING HARNESS

(SEE WIRING SCHEMATIC F-3A)NS 46" 081005 NYLON RETURN LINENS 26" 081016 1/4 FUEL LINENS 1 650278 GT MUFFLERNS 1 @@@@ MUFFLER GASKETNS 4 ** M8-1.25 X 20 GRADE 8.8 BOLTNS 4 ** 3/8 SPLIT LOCK WASHERNS 1 650265* MARATHON GENERATOR MOUNT PLATE


Not for

Rep

roduc

tion


E-3C

LOMBARDINI LDW 1003

Not for

Rep

roduc

tion




E-3D



LOMBARDINI LDW 1003

1 1 650830 LOMBARDINI LDW 1003 ENGINE2 2 100350 MECC ALTE LT3-100 GENERATOR3 1 650562 NLPRO DEUTZ ENGINE MOUNT4 1 100353 COMBO MOUNT BACK PIECE5 1 100352 COMBO MOUNT BOTTOM PIECE6 1 100354 MECC ALTE GENERATOR MOUNT BACK PLATE7 1 100614 5/16 -18 T SLOT NUT8 8 046120 3/8-16 X 1 1/2 HEX HEAD BOLT9 8 043065 3/8" SPLIT LOCK WASHER10 6 046041 5/16-18x1/2" 12 PT FLANGE HEAD BOLT11 4 046115 3/8-16 x 1 1/4 GR 5 HEX BOLT12 4 044038 3/8 - 16 NYLON INSERT NUT13 2 047015 3/8" FLAT WASHER14 2 046055 5/16-18 x 1 1/4" GR 5 HEX BOLT15 5 047010 5/16" PLATED FLAT WASHER16 2 044033 5/16 - 18 NYLON INSERT NUT17 1 651236 LOMB MUFFLER18 1 046045 5/16 - 18 x 3/4" GR 5 HEX BOLT19 1 043055 5/16" PLATED SPLIT LOCK WASHER20 2 ** M8 x 1.25mm FLANGE NUT21 2 ** M12 - 1.75 X 25MM HEX BOLT22 2 ** 12MM WASHER

Not for

Rep

roduc

tion

NIGHT-LITE PRO SERIESF-1A

ELECTRICAL DIAGRAMS

KUBOTA SCHEMATIC (Before Sept 1, 2004)

KUBOTA SCHEMATIC (After Sept 1, 2004)

Not for

Rep

roduc

tion




F-1BELECTRICAL DIAGRAMS

Not for

Rep

roduc

tion


F-2A

ELECTRICAL DIAGRAMS

PART# DESCRIPTION

650240 ISUZU ENGINE WIRING HARNESS

NOTE: ALL CONNECTORS VIEWED FROM THE REAR

ISUZU 3LB, 3LD ENGINE/GENERATOR WIRING HARNESS

Not for

Rep

roduc

tion





Not for

Rep

roduc

tion


F-3A

ELECTRICAL DIAGRAMSCAT/PERKINS 103.10 ENGINE

PART# DESCRIPTION

650285 CAT/PERKINS ENGINE WIRING HARNESS

CAT/PERKINS ENGINE WIRING HARNESS, KEYLESS OPTION

Not for

Rep

roduc

tion





MARATHON GENERATOR SCHEMATIC

POW’R GARD GENERATOR SCHEMATIC

Not for

Rep

roduc

tion


F-4A

ELECTRICAL DIAGRAMS

Not for

Rep

roduc

tion





120V GFCI AND 240V RECEPTACLE WIRING

Not for

Rep

roduc

tion


F-5A

ELECTRICAL DIAGRAMS

MULTI-TAP 50 HZ TRANSFORMER WIRING DIAGRAM

Not for

Rep

roduc

tion




F-5B

ELECTRICAL DIAGRAMS

DUTTON-LAINSON STRONG ARM WINCH SCHEMATIC

Not for

Rep

roduc

tion


F-6A

ELECTRICAL DIAGRAMS

LOMBARDINI LDW 903 WIRING DIAGRAM

Not for

Rep

roduc

tion




F-6B

ELECTRICAL DIAGRAMS

LOMBARDINI LDW 903 WIRING DIAGRAM

Not for

Rep

roduc

tion


ALLMAND LIGHTING SYSTEMSLIMITED WARRANTY

UNITED STATES and U.S. TERRITORIES

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED INCLUDING WARRAN-TIES OF MERCHANTABILITY OR OF FITNESS FOR PURPOSE, AND ANY EXCEPTIONS ARE DESCRIBED IN THEPUBLISHED LIMITED WARRANTY ADDENDUM, AVAILABLE UPON REQUEST.

COMPONENTS, SUB-ASSEMBLIES, AND DEVICES MANUFACTURED BY OTHER MANUFACTURERS ARE NOTCOVERED BY THIS WARRANTY. ALL WARRANTY INFORMATION FROM SUCH OTHER MANUFACTURERS ISPROVIDED WITHIN OR ACCOMPANY THESE GOODS.

Subject to the foregoing, the manufacturer, Allmand Bros. Inc., hereby warrants all equipment manu-factured by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of (1) yearafter delivery to the original purchaser. Additionally, Allmand Bros. Inc. hereby warrants all replacement partssupplied by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of 90 daysafter date of invoice. Delivery shall be deemed for the purposes of this warranty to have occurred no laterthan five days following the date of sale agreement or invoice unless the purchase agreement or invoicespecifically states a later delivery date in which case such delivery date shall control. The original purchasershall be deemed to be a person who places the goods or products in actual use, and any person holding suchgoods solely for wholesale or retail sale purposes shall not constitute an original purchaser. PROVIDED, anyleasing of these goods or other use beyond normal demonstration of same shall be deemed to be in use by anoriginal purchaser and all warranty periods shall commence at the time of such use. During the warrantyperiod any defective goods or parts hereof shall be repaired or replaced at manufacturer’s discretion. In theevent it is necessary to return such goods or parts to the factory, all transportation charges shall be prepaid.The manufacturer shall in no event pay mileage expenses, but will warrant outbound ground freight.

The obligations of the manufacturer is solely to repair or replace defective goods or parts or to refundthe cost of the same if it is determined by the manufacturer that repair or replacement will not return the goodsto proper working order or utility. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE ANDMANUFACTURER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, OR CONSEQUEN-TIAL DAMAGES. THE OBLIGATIONS OF THE MANUFACTURER HEREUNDER SHALL INNO WAY EXCEED THE PRICE OF THE EQUIPMENT OR PART UPON WHICH SUCH LI-ABILITY IS BASED.

The warranty shall not extend to tires, lamps, batteries, or parts that have been altered, changed,damaged, or improperly installed, repaired, operated or maintained. Provided, this exclusion shall not apply toinstallations, repairs or other work done at the manufacturer’s plant or under direct manufacturer’s supervi-sion. The Operator’s Manual, to the extent covered therein, is deemed to set forth the proper procedures foroperation, repair, installation, and maintenance of these goods.

No representative, dealer or distributor of the company is authorized to make any changes orexceptions to this warranty unless expressly authorized in writing from the manufacturer. All warrantyclaims must be filed within forty-five (45) days of the failure.

ALLMAND BROS. INC., 1502 W 4TH AVENUE, P.O.BOX 888, HOLDREGE, NE 68949 (308) 995-4495

Not for

Rep

roduc

tion




Not for

Rep

roduc

tion


Not for

Rep

roduc

tion

Date post:	18-Jan-2022
Category:	Documents
Upload:	others
View:	15 times
Download:	0 times

NIGHT-LITE PRO PARTS MANUAL

Documents