+ All Categories
Home > Documents > Nissan Patrol GU - caravansplus.com.au

Nissan Patrol GU - caravansplus.com.au

Date post: 30-Dec-2021
Category:
Upload: others
View: 8 times
Download: 1 times
Share this document with a friend
7
Tools Long flat screw driver and a small flat screw driver Phillips head screw driver 10mm Socket Container to hold bolts, screws and loose items. Installation The first procedure is to remove the internal door panel. Instructions below may refer to the “latch end” or the “hinge end”. This means that as you look at the driver’s door from the inside, the Right side is the “latch end”, and the Left side is the “hinge end”. Removing the door panel from the door frame. 1. Lower door window all the way. 2. Remove door lever cover using small flat screw driver. Wedge the screw driver between the door handle cover and the lock button to gently loosen the cover. Repeat at the bottom if necessary. 3. Remove arm rest cover. You should be able to do this by hand. Grip the “latch end” of the cover and lift. Use a flat screw driver if it doesn’t come away easily. INSTRUCTIONS TO INSTALL THE ORA XL MIRROR TO THE NISSAN PATROL GU SERIES LATCH END HINGE END Arm Rest 1 More information https://www.caravansplus.com.au
Transcript
Page 1: Nissan Patrol GU - caravansplus.com.au

Tools• Longflatscrewdriverandasmallflatscrewdriver• Phillipsheadscrewdriver• 10mmSocket• Containertoholdbolts,screwsandlooseitems.

Installation

Thefirstprocedureistoremovetheinternaldoorpanel.Instructionsbelowmayrefertothe“latchend”orthe“hingeend”.Thismeansthatasyoulookatthedriver’sdoorfromtheinside,theRightsideisthe“latchend”,andtheLeftsideisthe“hingeend”.

Removingthedoorpanelfromthedoorframe.

1. Lowerdoorwindowalltheway.

2. Removedoorlevercoverusingsmallflatscrewdriver.Wedgethescrewdriverbetweenthedoorhandlecoverandthelockbuttontogentlyloosenthecover.Repeatatthebottomifnecessary.

3. Removearmrestcover.Youshouldbeabletodothisbyhand.Gripthe“latchend”ofthecoverandlift.Useaflatscrewdriverifitdoesn’tcomeawayeasily.

INSTRUCTIONSTOINSTALLTHEORAXLMIRROR

TOTHENISSANPATROLGUSERIES

LATCHEND

HINGEEND

ArmRest

1More information https://www.caravansplus.com.au

Page 2: Nissan Patrol GU - caravansplus.com.au

4. Remove2screwsbehindthearmrestcover.

5. Removethescrewatthebottomofthehandlesectionoftheelectricalcontrolpanel.

6. Liftouttheelectricalcontrolpanelfromthe“hingeend”first.Thiscanbedonebyhand,althoughaflatscrewdrivermayhelpunclipthatend.

7. Removeelectricalplugbehindtheelectricalcontrols.Theremaybe2electricalplugsonthedriver’sside.Thesmallplugisremovedbypressingthesmalltag.Theotherplugmayneedtobewedgedoutwithasmallflatscrewdriver.

8. Removescrewlocatedbehindtheelectricalcover.

Electricalcontrolpanel(handlesection)

2More information https://www.caravansplus.com.au

Page 3: Nissan Patrol GU - caravansplus.com.au

9. Removetriangularplasticcoverat“hingeend”(coveringthemirrorbolts).Youmayneedtowedgeaflatscrewdriverbetweenthecoverandthedoorframetounclipthesmallplugwhichkeepsthecoverinplace.

10. Thedoorpanelconnectstothedoorwithseveralhiddenplasticplugsthatrunalongthebaseandupeachsides.Theplugsatthebaseofthedoorarelocatedbesideindentsinthemetalframe.Locatetheseindentsandgentlyprisethepanelawayfromtheframewithalongflatscrewdriver.Continuepullingthepanelupthesidesofthedooruntilallplugshaveunclipped.

11. Oncealltheplugshavebeendetachedgentlytapthebaseofthepaneluntilthewholepanelseparatesfromthedoorframe.

ThenextprocedureistoremovetheexistingmirrorandtoinstalltheORAXL.It may be helpful to have another person assist in holding the mirrors whilst they are being detached and installed.

3More information https://www.caravansplus.com.au

Page 4: Nissan Patrol GU - caravansplus.com.au

12. Removetheelectricalplugthatconnectsthemirrortothemirrorcontrols.Youmayneedtopeelbacktheclearplasticdustcovertoaccessthisplug.Removetheplugbypressingthetabandgentlypullingtheplugout.

13. Use10mmsocketorPhilipsscrewdrivertoloosenthebolts,beginningwiththebottombolts.Holdthemirrororhavesomeoneholditforyouasthefinaltopboltisremoved.Thencarefullyremovethemirror.

14. ThreadthroughtheORAXLmirrorelectricalcable.Thenpositionthenewmirrorinplaceensuringthattherubbersealisflushandinposition.

4More information https://www.caravansplus.com.au

Page 5: Nissan Patrol GU - caravansplus.com.au

15. Screwinthetopboltfirst(initiallynottootight)thentheothers.Thentightenallbolts.

16. Connectelectricalplugends.Thencheckthattheelectricalmirrorbuttonswork.Thelargertopsectionofthemirrorshouldmoveleft/right/up/downasyourstandardmirrordid.Thebottommirrorismanuallyadjusted.Replacetheclearplasticdustcover.

17. Replacethedoorpanel.Startingwiththewindowcavityatthetop,usingsomemanualpressuretopopitintoplace.Theplugsatthebaseandsidesshouldlineupandclickintoplace.

5More information https://www.caravansplus.com.au

Page 6: Nissan Patrol GU - caravansplus.com.au

18. Replace3screws:Onebehindtheelectricalcontrolpanel,twobehindthearmrest.

19. Replacethecontrolpanelelectricalplug.Thenputtheelectricalcontrolpanelbackinposition.

20. Replacetheverticalscrewthatholdstheelectricalcontrolpanelinposition.

21. Replacethearmrest,“hingeend”first.

6More information https://www.caravansplus.com.au

Page 7: Nissan Patrol GU - caravansplus.com.au

22. Replacethedoorhandlecover.

23. Replacethetriangularplasticcover.

YournewORAXLtowingmirrorisnowreadytouse.

TheMirrorsarepresettotheoptimumangleforviewingfromthedriver’sposition.Howevertheywillfoldinifyouaccidentallystrikeanobject.

ORAXLmirrorswillextendoutanextra100mmifrequired.Firmlypullonthemirrorheaduntilitslidesallthewayout.

Ifyouhaveanyquestionscalluson02)62393858

Disclaimer;Theseinstructionsareforaninstallerwithbasiccompetencyinhandlingtools.Theaveragehandy-personshouldbeabletoinstallthesemirrorswithoutdamaginganycarcomponents.Ifyoudonotfeelthatyouhavetheseskills,pleasehavetheminstalledbyasuitablyqualifiedtradeperson(eg.amechanic).ORAProductsdoesnottakeanyresponsibilityfordamagetothecarthatmayoccurasaresultoftheinstallationorremovaloftheORAXLMirrors.

7More information https://www.caravansplus.com.au


Recommended