Nisshinbo • Behrens • EuroMach THICK TURRETClearance Chart Sec-1 Keying - Standard Locations 2...

Amada • Strippit/LVD • Finnpower Nisshinbo • Behrens • EuroMach

STRIPPIT® is a Registered Trade Mark of the Idex Corporation Inc.

THICK TURRET (AT) TOOLING

COLE ENGINEERED

C.E. TOOLING 3Section

Tooling Booklet

See Section 1 For Technical Information

QUICK SET™ patented

Tool Length Adjustment

Section-3 Page 2 n Mar-09 Pricing Subject to Change With Out Notice

COLE ENGINEERED

Sta. C-E 2”-4 1/2 WT Style Punch. P15,17,19 HD™ Series 80, 90® 90abs, 90wls & LS™ Holder Styles

Original Standard Full Body Style Page 16,18,20,22 m Metric M12 or i Inch ½” threads

Punches are Equiped with

Puller M8 threads Strippers recessed 2mm for greater punch grind life

Tool Styles INDEX: Metric, Inch, LS™, Ultra®, S90® S90abs® S90wls™, Vortec™

Metric Original

Page 6,7,11,13

Sta. B Standard & ABS(w/Lube Channels Fits all Tool Styles

CE’s Sta. B Stripper can be use for all RSP Guides: Quick-Set™,Vipros, Impact, HP™, Ultra™, S80, S90, Drop-In Page 10,11,13-15

Vortec™ or Z-Style Compatible Components Page 1716,18,20,22

Ultra is a regestered trade mark of Mate Precision. Series 90 & WLS are trade marks of WilsonTool. Vortec is a trade mark of Amada Engineering Service.

Vortec™ style Quick-Set™

PAGE 6,7,12,13

Ultra Tec WT HPTM Amada Quick-Set Page 9 Page Page 7

STRIPPER STYLES AM Style for use in C.E., Amada,

& Strippit® mfg. Guides

WT Style for use with WT, CE, or Amada Mfg. Guides

for use in Wilson Mfg. Guide

U Style for use with Mate Mfg. \ Ultra Guies

Sta. A Strippers

*

*

*

*

*

*

Shearing Dies & Guide Assemblies

UltraTec™

Page 10

Page22

Qui

Quick- Set™

Sizes 1.25”=31.75mm - 4.5”=114.3mm

Multi-Tools Page 23

& Section 6 booklet

WT HP™ & S90™ Std, abs, wls

Inch WT-S80 Page 8,9,14,15

Std HDStd HD

Down Load our complete Thick turret booklet form www.cetooling.com

Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 3 n

COLE ENGINEERED

Page

METRIC: Amada Style Standard & Air Blow, Vipros Station A, B, C, D, E Although C.E. Tooling manufactures tools to be fully interchangeable with Amada tools, there is no affiliation between our companies.

6,7,10, 14,16,18

INCH: Wilson Style Standard-original Inch-S80 ½ & 1¼” Station A & B Although C.E. Tooling manufactures tools to be fully interchangeable with Wilson’s tool, there is no affiliation between our companies. 8,12

HD:Wilson Style High Performance & Series 90® HD, & Series 90 are registered trade marks of Wilson Tool Although C.E. Tooling manufactures tools to be fully interchangeable with Wilson’s tool, there is no affiliation between our companies. 15,17,19

Ultra® Mate Style Ultra Tek , Metric, or Inch, Style Tools Ultra is a regestered trade mark of Mate Precision. Although C.E.Tooling manufactures tools to be fully interchangeable with Mate Precision Ultra™ products, there is no affiliation between our companies

9, 14, 16,18

Accessories: Sec.-1 Coining 27 Multi-Tools Nisshinbo —> Finnpower style see Booklet 6 Adapters: 22 Drop-In Holders & Tools 13

Alignment Tools 5 Ejectors 5

Ball Riding / Lifter Dies 25 Embossing - Extrusions 27 Shears

Blade Inserts & Holders 20 Slug Ejectors 5

Card Guide 25 Form Tools 24-28 Special Shapes 29

Center Punch 27 Half Shear 27 Standard Shapes 2

Chamfer Corners 2 Stiffening Rib Tools 24

Charactor Marking Insert Style 28 Inch Style Sta. A & B 8, 14 Stripper-Guide Adhesive Disks 6-20

Clearance Chart Sec-1 Keying - Standard Locations 2 Tapping: Turret Tapping 22

Coatings: Technical Info. Sec-1 Lances & Louvers 29 Tooling Packages

23

5

21

Index of Tooling- Holders Styles

C.E. PRODUCT FEATURES HIGHLIGHTS

DIE Constant Clearance in Corners Superior part quality: Prevents large corner burrs, makes dies stronger & increases die life. Strongest Dies: To allow the slug to fall through die, often die back must be relieved. CE burns a 3° taper to allow slug to pass though with little drag. On corners of shapes like rectangles, rather than leave sharp were they can attract stress and create a crack line, CE takes the care to burn a tapered radius relief. This is an important feature skipped by most of our competitors.

DIE OPENNING

PUNCH

FACE

PUNCH Easier stripping and reduced gauling as we

extend 1/4°(1/8° per side) Back Taper. Cutting Edge and Corners have .003 honed radius.

EXCLUSIVELY From C.E. TOOLING The QUICK-SET™ This patented tool length adjustment unit allows for fast, simple tool set up for standard and special application tools. Form tool holders adjust in as close as .0025” with only a lift and turn of the outer knurled collar. Standard Tool Holders adjust in .006/15mm increments with a push of a button located in the side of the lifter flange. Tool length can’t change during use. Reduced set up and maintenance costs.

Stripper Plates Relived .04 - .12 depending on station. This relief extends greater punch tip grind life.

SLUG TRAP™ DIES ELIMINATE SLUG PULLING WITH A SECOND TAPER ON THE DIE WHICH TRAPS THE SLUG. Note: Taper shown in diagram is exaggerated to express feature.

Character Markng Accepts Replaceable Inserts. Ref. page 26. Request our Technical Bulletin


COLE ENGINEERED

ADDITIONAL COSTS FOR NON-STANDARD OPTIONS Add 25% to set

price for Clearance of .003 (.08mm) &

Less. PUNCHES Corners 1-3 X # 4(all)

With Length under 1.625 and any size Radius or Chamfer # X $10.00 $10.00 With Length over 1.625 & .032 maximum Radius or Chamfer # X $10.00 $30.00 With Length over 1.625 and Radius or Chamfer over .032(,8mm) # X $15.00 $40.00 Add On To All DIES any size Radius or Chamfer # X $10.00 $10.00 No Extra Charge for STRIPPERS or When Ordered As A Set

RADIUS CHAMFER RADIUS OR 45°CHAMFERS + $ per corner

Widths or Dia. Under .093(2,36mm) Add 30% to set price. Widths or Dia. Under .062(1,57mm) Add 50% to set price. Widths or Dia. Under .046(1,2mm) Add 100% to set price. Included in add on cost; Dies are produced with .090 land then a 1.5° relief is given to prevent multiple slugs from stacking causing excessive pressure on punch. Further, punches can be produced with Stubby Punch Design at no additional charge. A Stubby Punch has it’s tip (diameter or width) first ground to a size of .187 then a tip is ground to requested size for a length of .225+ thickness to be punched. (If fitted strippers are used, + .125 to tip grind length and use strippers .187 or > in diameter or width.)

Add 50% to die price for Solid Dies.

DIA. ORWIDTH.156

.09.09 land,

then 1.5° relief

Optional STUBBY PUNCH

.187 Dia. or Width

STANDARD KEYING 10 Standard Shapes plus Rounds. (RT Rectangles • SQ=Square • OB=Obround • SD=Single-D • DD=Double-D

LD=Long-D • EQ=Equalateral • OC=Octagon • HX=Hexagon • QD-Quad-D • Add $10 per set to standard price for LD & EQ

LOOKING AT FACE OF LOOKING AT TOP OF

PUNCH DIE Sta.

A & B ½ •1¼

Sta. C 2”

Sta. D 3½”

Sta. E 4½”

Series 80

Sta.C-E 2”-4½”

SPECIAL SHAPES

SHIPPED IN 1-5 days Expediting: 3 days 10%, 2 days 30%, 1 day 50%

10 STANDARD SHAPES 1 - 4 work day delivery.

RECTANGLE • SQUARE • OBROUND • SINGLE-D DOUBLE-D • QUAD-D • HEXAGON • OCTAGON + $10 PER SET FOR: LONG-D & EQUILATERAL

Guaranteed Expediting Services FDS=Firm Delivery Service • Order by 1pm,

Same or Next day guaranteed Guaranteed to ship in 2 days

Tool Styles: AT, AS, ST: 1 day FDS=25% 2 day FDS=10% Tool Styles 36tc,28st,Lila,92/93

1 day FDS=50% 2 day FDS=25%

Shapes on Angles or Extra Key Locations. Die View

Visualize location key positioned as tool would load into turret. Start with length of shape horizontal.(Length points to 0º) Next Rotate shape, not location key. A sketch accompanying your order ensures keying as required! Note: Other Manufactures ordering diagrams may differ from C.E.’s!

0

90

180

270

Angle120

20

0

90

180

270

Angle120

20

0

90

180

270

Angle120

20

0

90

180

270

Angle120

20

0

90

180

270

Angle120

20

Ex. AT Sta.Keyed 20

Ex. AT Sta.Keyed 20

Ex. AT Sta.Keyed 20

Ex. AT Sta.Keyed 20

Ex. 28XX/36tKeyed 20



Ex. 28XX/36tKeyed 20Ex.114/112/C

Keyed 20Ex.114/112/CKeyed 20

Ex.114/112/CKeyed 20

Ex.114/112/CKeyed 20

Standard Delivery is 3-5 work days Guaranteed Delivery(Expediting)

FDS=“FIRM DELIVERY SERVICE” Order By 1pm, to ship in __ Work Days

3 Day Guaranteed +10% 2 Day +30%, 1 Day +50%


COLE ENGINEERED

Slug Ejectors Ejector holes are placed in punch tip sizes >.270”/6.86mm This size can be reduced on request.

EJECTOR For Hole Size

Square Used for AT,AS,ST Cat.Code

Round Used for 4W,2W,2B

Cat.Code .078/2mm N/A *AEJ-R2 Bag of 50 $22.50

.109/3mm *AEJ-S3 bag of 24 $13.40 .234/6mm-.25” *AEJ-S6 bag of 24 $13.40 *AEJ-R7 Bag of 50 $20.90

.394/10mm *AEJ-S10 bag of 12 $9.10 Used for AT,AS,ST,4W,2W,2B

.594/15mm *AEJ-S15 bag of 12 $11.25 Used for AT,AS,ST,4W,2W,2B Have Ejectors Installed in New Punches at additional minimal

cost to punch price! Call For Current Pricing!

Punch Sharpening Fixture

WORK HOLDER

PARTS Save! up to

Amada Machine Parts Save! On Clutches, Brakes, Electronic Switches, Fanuc Control Boards, Ball Screws, Rails, Hydraulics, Filters, Belts, etc.. Go to Section 11 booklet.

Sq. & Rt Shown Sq. & Rt Shown

OPTIONAL PUNCH SHEARS

Best all purpose shear for reducing

tonnage requirement Nibbling must be

performed at 75% of punch size to avoid

side loading.

An all purpose shear. Ideal for

nibbling.

An all purpose shear. Ideal for nibbling. Used over Inverted Shear when punching heavy plate.

Best Shear for slotting tools, 3”

or longer in length.

Reduces tonnage requirements while

reducing slug deformation. Requires a very Ridged Press.

A Shear suggested for all diagonal dimensions over 2”/50.8mm with widths >.375/9.53mm

Roof Top *ARTS $8.00

Inverted *AIS $9.10

Concave *ACS

$

Double Inverted

*ADIS $20.00

Whisper (1-Way) *AWS

$8.60

Spiracle *ASPS $8.60

Ideal for rounds or squares less than 1.18

30,m. Lessens tool side loading &

“Easy to sharpen”!

Stripper / Guide Dia. Qty Part# Price 1/2 .87 10 pcs *A06082 8.60

1-1/4 1.75 10 pcs *A06084 8.60

3-1/2 3.67 10 pcs *A06086 66.90 4-1/2 4.67 10 pcs *A06088 Call

Reduces marring of material by the stripper. Just peel off adhesive backing, and attach to stripper face. Use

sharp knife blade to cut out stripper opening.

2” 10 pcs *A06085 Call

STRIP GUARD Adhesive Disks

ALIGNMENT TOOLS

½” Sta. A keyed ATA-ALIGN-PD 358.75 ½” A non-keyed ATA-ALIGN-PD2 176.55

1-¼ Sta. B ATB-ALIGN-PD 502.30 2-½ Sta. C ATC-ALIGN-PD 639.10 3-½” Sta. D ATD-ALIGN-PD 696.75 4- ½” Sta. E ATE-ALIGN-PD 799.90

Not shown, used with keyed unit, to align multi-3 die holder. Place keyed unit in outer position and

non-keyed in inner position.

Dwg:\cnc-jobp\ALN-TOOL.2d

KEYS: Turret-Guides

See Section 11 Booklet

For disassem-bly of Sta. A & B Punch Assemblies

Spanner Wrench *ASPWR


COLE ENGINEERED Metric Amada Style Standard & Air Blow Max. Material 7 ga. MS

STANDARD AMADA COMPATIBLE C.E. Too Part # *= r-round s-shape

Amada

Code No.

$ Round Amada Code No. $ Shape

PUNCH ASSEMBLY D-2 ATA-PAm-* 11103K 80.75 12102K 148.70

PUNCH ASSEMBLY M-2 ATA-PAm-hs-* 100.60 164.80

DIE AT-A-D-* 21102K 15.20 22102K 35.65

DIE w/SlugTrap™ ref. p1.12 AT-A-Dst-* 27.80 42.80

SET Punch Ass’y D-2& Die ATA-PADm-* 31103K 102.75 32102K 184.35

SET Punch Ass’y HS & Die ATAPADm-hs-* 115.60 194.75

SET P.Ass’y M2 & Die w/SlugTrap ATAPADm-hst-* 118.80 201.20

PUNCH D-2 Steel AT-A-Pm-* 41103K 25.40 42102K 52.70

PUNCH M2 High Speed Steel ATA-Pm-hs-* 41___ 36.40 42___ 64.20

GUIDE OEM Style “hardened” AT-A-G-m* 51102K 41.10 52102 63.920

HEAVY DUTY Max. 1/4 M.S. C.E. Too Part # Amada $ Round Amada $ Shape

PUNCH ASSEMBLY ATAPAm-hd-* 150.85 213.75

DIE ATAD-* 21102 15.20 22102 35.65

DIE w/SLUGTRAP™ (ref. P1.12) ATADst-* 27.80 42.80

SET Punch Ass’y M-2 & Die ATAPADm-hd-* 162.65 252.55

SET P. Ass’y M-2 & Die w/SlugTrap™ ATAPADm-hst-* 168.00 256.80

PUNCH MD Heavy Duty ATAPm-hd-* 41_02 36.40 42_02 64.20 GUIDE ATAG-m* 51102 41.10 52102 63.90

ADJUSTABLE

PUNCH HEAD

SPRING

SPRINGRETAINER

GUIDE

PUNCH

GROUNDLOCATION KEY

SPRING Max. 9ga.MS

SPRING RETAINER

LOCATION KEY

PUNCH + 1/8º Back taper to assist stripping, and

reduce gauling

DIE

OEM style Hardened Guides!

Side Lock Punch Head

AIR BLOW AMADA C.E. Too Part # Amada $ Round Amada $ Shape

PUNCH ASSEMBLY

Coil ATA-PA-v-* 11802a 160.50 11804a 232.20 Disk Spring ATA-PAv-hd* 185.65 258.95

DIE AT-A-D-* 21102k 15.20 22102k 35.65 DIE w/SLUGTRAP™ref. P1.12 AT-A-D-st* 27.80 42.80 SET (Punch Ass’y & Die) ATA-PADv-* 31802a 174.45 32802a 264.85 PUNCH M-2 High Speed AT-A-Pv-* 41802a 56.20 42802a 77.60 GUIDE AT-A-G-v-* 51802a 82.40 52802a 140.20

COMPONENT PARTS C.E. Too Part # Amada $Round Amada $Shape

PUNCH HEAD Side Lock AT-A-Hm 90140K 9.65 COIL SPRING AT-A-Sm 90130K 8.05 DISC SPRING (Set of 24) AT-A-DS-m 90130k 36.40 SPRING RETAINER AT-A-SRm 90120K 6.20

Spring Retainer with Extended B Dimension to Give More Punch Life For Punches After .08”/2,mm Grind (Red) ATASR2

For Punches After .16”/4,mm Grind (Green) O-RING ATAG-Oring-m 90090 1.65 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs

B

1/2 Station A SIZE RANGE .093-.500”/2,36-12,7mm

Heavy Duty 1/4”M.S.

• Max. material 1/4”/6,mm mild steel up to 1/2” diameter • 1º total back taper on punch tips to reduce gauling build up, and stripping pressure.

L

DISC SPRING (28 req’d) Max. 1/4” M.S.

SPRING RETAINER

DIE


PUNCH HSS (M2) + 1º Back taper to

assist stripping, and reduce gauling



COLE ENGINEERED

• No Shimming • Lift and Turn Spring Pack for .004/,1mm increments of adjustment. • Rapid Hit™ • Achieve faster nibble rates when used on hydraulic, high speed nibbling machines. • Uses Industry Standard Punches • Punch up to 9 ga. 3.8mm thick steel.

Quick-Set™ Spring Canisters Amada Vipros Compatible

DIE

Method #2 HOLDER SYSTEM Install in all turret stations. Stock only punch, stripper & die. Guide uses removable strippers.

Method #1 PUNCH ASSEMBLY Each tool size is inventoried as a complete punch and guide assembly. · Faster change over and a more durable (hardened) guide.

Standard Vortec Style W/lube notches

Spring Pack CAN Ass’y *AATA-CANmd 50000k 104.90 O-Ring (Retainer to guide) ATAG-Oring-m 90090k 1.65 O-Ring (Seal on punch head) ATACAN-Oring 52010k 1.65 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs

COMPONENT PARTS

1/2 Station A SIZE RANGE .093-.500”/2,36-12,7mm

ABS Air Blow Metric Amada Style Punch & Guide

Method #1 Punch Assembly ATA-PAv--* 11853a 235.40 12852a 304.95 DIE ATA-D-* 21102k 15.20 22102k 35.65 DIE w/SLUG TRAP™ ATA-D-st-* 27.80 42.80

Method #2 Holder System *AATA-QHv-rsp* 246.10 299.60 Punch, Die, Stripper M2-abs ATA-PSD-v* 81.60 138.30

Stripper W/Lub notches ATA-Sv-* 51863a 13.40 52863a 24.10 Punch M-2 HSSteel –abs ATA-Pv-* 41802a 56.20 41803a 77.60

Quick-Set™

TM

C.E.TOOLINGTOOLS

PUNCHRAISES CLOCKWISE

CLOCKWISELOWERS PUNCH

COUNTERTWIST

Standard Metric Amada Style Punch & Guide

Method #1 Punch Assembly CE Part # *= r-round s-shape

Amada No. $ ROUND Amada No. $

SHAPE

Punch Assembly D2 ATA-PAm-q-* 11852k 160.50 12152k 224.70 Punch Assembly M2 ATA-Pam-q-hs-* 173.35 237.55 DIE ATA-D-* 21102k 15.20 22102k 35.65 DIE w/SLUG TRAP™ ATA-D-st-* 27.80 42.80 Method #2 Holder System *A-ATA-QHm-rsp-* 50000k Punch D-2, Die, Stripper ATA-PSD-m-* 49.80 105.15 Punch M-2, Die, Stripper ATA-PSDm-hs-* 58.35 118.00 Punch M-2, Die W/SLUGTRAP™, Stripper ATA-PSDm-h-st* 61.00 123.35 Punch D-2 Steel ATA-Pm-* 41102k 25.40 42102k 52.75 Punch M-2 HSSteel ATA-Pm-hs* 36.40 64.20 Stripper Plate for RSP guide ATA-Sq-* 51863k 11.80 52863k 21.40


COLE ENGINEERED

Standard Pricing is for Punch Tip Sizes .093 (2,3mm) and Above

WT COMPATIBLE DESCRIPTION

CE Part # *= R-round S-shape

WT #

PRICE ROUND

WT #.

PRICE SHAPE

PUNCH ASSEMBLY D-2 ATA-PAi-* 13453 85.30 01811 148.70 PUNCH ASSEMBLY M-2 ATA-PAi-hs-* 0180,8/9 100.60 164.80 DIE ATA-D-* 02192 15.20 0181,7/8 35.65 DIE W/SLUG TRAP™ (ref. P1.12) ATA-Dst-* 27.80 02193 42.80 SET (Punch Ass’y & Die) ATA-PADi-* 102.75 186.20 SET Punch Ass’y M-2 & Die ATAPADi-hs 115.60 194.75 SET•PunchAss’yM-2&Die ST™ ATAPADi-hst-* 01807 118.80 256.80 PUNCH D2 (includes Retain Clip) ATA-Pi-* 1807 23.30 1816 50.60 PUNCH HS High Speed Steel ATAP-i-hs 36.40 64.20 GUIDE Fitted ATA-Gi* 2821 41.10 2904/3 63.90

PUNCHHEAD

SPRING

SPRINGRETAINER

GUIDE

PUNCH

DIE

DIE

PUNCH 1/8º Back taper to assist

stripping, and reduce

gauling!

SPRING RETAINER

SPRING

PUNCH HEAD

HEAVY DUTY C.E. Too Part # WT No. $ Round WT No. $ Shape

PUNCH ASSEMBLY HS ATAPAi-hd* 13514 147.70 13516 216.15 DIE ATAD-* 21102 15.20 22102 35.65 DIE w/SLUG TRAP™ref. P1.12 ATADst-* 27.80 42.80 SET Punch Ass’y HS& Die ATAPADm-hd-* 162.65 252.55 SET P.Ass’y&Die=slug trap™ ATAPADi-hst-* 168.00 256.80 PUNCH (MD Heavy Duty) ATAPi-hd-* 2303 29.00 2304 56.55 GUIDE Fitted ATA-Gi-* 51102 41.10 52102 63.90

Max. material 1/4”/6,mm mild steel

• 1º total back taper on punch tips to reduce gauling build up and stripping pressure.


INCH: Wilson Style Standard Original Series 80

Retainer Clips 4

pcs

1/2 Station A SIZE RANGE .093-.500”/2.36-12.7mm

COMPONENT PARTS CEPart # WT # Price

1 PUNCH HEAD ATA-Hi 2294 5.35 Set Screw Long Coin Point *A6297 6297

4 SPRING DISC Set (__) AT-A-DS-i 2297 31.30 5 SPRING SUPPORT /Retainer AT-A-SRi 2295 4.85 6 O-Ring for Spring Support ATAG-Oring 2282 1.65 Punch Retainer Clips 4pc *A-ATAPC 1805 .95 Punch Shims pack of 25pc 2167 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs


PUNCH HSS -M2 +1º Back taper to assist stripping,

and reduce gauling

Heavy Duty

COMPONENT PARTS CEPart # WT # Price

1 PUNCH HEAD ATA-Hi 1802 5.35 Set Screw Long Coin Point *A6297 6297 3 SPRING COIL AT-A-Si 1803 7.75 5 SPRING SUPPORT /Retainer AT-A-SRi 1804 4.85 6 O-Ring for Spring Support ATAG-Oring 2282 1.65 Punch Retainer Clips 4pc *A-ATAPC 1805 .95 Punch Shims pack of 25 pcs 2167 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs


COLE ENGINEERED

CE does not produce Ultra Tec® Canisters or Guides, only the Punch & Stripper used with them.

Although C.E.Tooling manufactures tools to be fully interchangeable with Mate Precision Ultra™ products, there is no affiliation between our companies Pricing is for Punch Tip Sizes .093 (2,36mm) and Above

Station A & B ½u &1¼u Replacement Components, For use in Ultra Tec® and QuickHit®

For Components for Mate’s Ultra® or Original station C-E (2”, 3½” & 4½”) Holders, look to page 8-10 “Original Full Body style tooling, or P17 if WT style punches are being used. Note: We do not offer replacement stripper plates for the Ultra® Sta. C-E holders.

Ultra, QuickHit™, & Mate, are trade marks of Mate Precision.

ULTRA-Tec™ Style Replacement Tooling

½u Station A for UltraTec™ Holder

Size Range .093-.500”/2,3-12,7mm

DESCRIPTION C.E. Tool Code No.

*= R-round S-shape

PRICE ROUND

PRICE SHAPE

½ Punch High Speed Steel ATA-Pu-* 20.90 44.95 ½ Stripper Plate ATA-Su-* 8.05 15.55 ½ Stripper W/Lub Notches ATA-Su-v-* 9.65 18.20 ½ DIE ATA-D-* 15.20 35.65 ½ DIE w/SLUG TRAP™ ATA-D-st-* 27.80 42.80

1¼u Sta. B for UltraTec™ Holder

1¼ Punch High Speed Steel ATB-Pu-* 37.45 64.20 1¼ Stripper Plate RPS ATB-S-* 10.70 25.40 1¼ Stripper W/Lub Notches ATB-S-v-* 15.00 27.85 1¼ DIE ATB-D-* 16.15 43.95 1¼ DIE w/SLUG TRAP™ ATB-D-st-* 29.25 48.70

Size Range 501-1.250”/12,7-31,7mm

1¼ Inch Series 80: for UltraTec™ Holder

DESCRIPTION C.E. Tool Code No. $ ROUND $ SHAPE

1¼ i Punch D-2 ATB-Pi-HS* 43.25 81.00 1¼ i Punch M-2 ATB-Pi-HS* 57.80 96.30 1¼ Stripper Plate ATB-S-* 10.70 25.40 DIE ATB-D-* 16.15 43.95

Die W/SlugTrap™ ATB-D-st-* 29.25 48.70

UltraTec™ Strippers Sta. A & B Lube Notches can be included in stripper openings at no addional cost. Add “v” to code

CE will beat are competitors quote on special shapes by 20%

Metric Original for UltraTec™ Holder


*= R-round S-shape $

ROUND $

SHAPE

1/2m Metric Sta. A

½m Punch D2 Steel ATA-Pm-* 25.40 52.75 ½m Punch M2 ATA-Pm-hs* 36.40 64.20 ½m Punch Vortec ATA-Pv-* 56.20 77.60 ½u Stripper Plate ATA-Su-* 8.05 15.55 ½ DIE ATA-D-* 15.20 35.65 ½ DIE w/SlugTrap™ ATA-D-st-* 27.80 42.80

1¼m Metric Sta. B

1¼ m Punch D-2 ATB-Pm-* 44.40 81.00 1¼ m Punch M-2 ATB-Pm-HS* 57.80 96.30 1¼ v Punch Vortec ATB-Pv-* 80.25 117.70 1¼ Stripper Plate ATB-S-* 10.70 25.40 DIE ATB-D-* 16.15 43.95 DIE w/SlugTrap™ ATB-D-st-* 29.25 48.70

Add $3.00 to round punch for dowel pin.


COLE ENGINEERED

AIR BLOW AMADA COMPATIBLE C.E. Too Part # Amada Code No. $Round Amada

Code No. $Shape

PUNCH ASSEMBLY

Coil Spring ATB-PA-v-* 11804a 203.30 12804a 267.50

Disk Spring ATB-PAv-hd* 245.05 309.25

DIE AT-B-D-* 21101k 16.15 22104k 43.95

DIE w/SLUG TRAP™ref. P1.12 AT-B-D-st* 29.95 48.70

SET (Punch Ass’y-coil & Die) ATB-PADv-* 219.35 313.00

PUNCH M2 High Speed AT-B-Pv-* 41804a 80.25 42802a 117.70

GUIDE –Solid AT-B-G-v-* 51804a 107.00 52802a 128.40

Standard Pricing is for Punch Tip Sizes .093 (2,3mm) and Above

Spanner Wrench *A-SPWR

DISC SPRING (20)

PUNCH HSS (M2) 1º Back taper to assist stripping, and reduce

gauling Triple Temper

STANDARD AMADA COMPATIBLE

C.E. Too Part # *= r-round s-

shape

Amada

Part #. $Round Amad

a Part #.

$Shape

PUNCH ASSEMBLY D2 AT-B-PA-m-* 11104K 153.05 12104K 213.40

PUNCH ASSEMBLY M2 AT-B-PAmhs* 168.00 12104K 226.85 DIE AT-B-D-* 21101K 16.15 22104K 43.95 DIE w/SLUG TRAP™ref. P1.12 AT-B-Dst-* 29.95 48.70 SET Punch Ass’y D2& Die ATB-PADm-* 31104K 169.10 32104K 257.35 SET Punch Ass’y M2 & Die ATBPADm-hs-* 184.05 272.35 SETP. Ass’y M2 & Die=Slug Trap ATBPADm-hst-* 188.35 280.35 PUNCH D2 Steel AT-B-Pm-* 41104K 44.40 42104K 81.00 PUNCH M2 High Speed Steel ATB-Pm-hs-* 41___ 57.80 42___ 96.30 GUIDE Solid OEM Style ATB-Gm-* 51104K 69.60 52104K 84.35


PUNCH + 1/8º Back taper

to assist stripping, and reduce gauling



Metric Amada Style Standard & Air Blow 1¼ Station B SIZE RANGE .501-1.250”/12.7-31.7mm

COMPONENT PARTS C.E. Too Part # Amada $Round Amada $Shape

PUNCH HEAD • Solid AT-B-Hm 93502k 10.70

COIL SPRING AT-B-Sm 90131K 13.95

DISC SPRING Set (20) AT-B-DS-m 55.65

SPRING RETAINER AT-B-SRm 90121K 13.95 Spring Retainer with Extended B Dimension to Give More Punch Life

For Punches After .08”/2,mm Grind (Red) ATBSR2 For Punches After .16”/4,mm Grind(Green) ATBSR4

O-RING ATAG-Oring-m 90090 1.65 Strip Guard Adhesive Disc *A06082 8.60 Pack of 10 pcs

PUNCH HEAD • Side Lock AT-B-Hm-SL 13.95

Heavy Duty 3/8” M.S.


HEAVY DUTY Max. 3/8 M.S. C.E. Too Part # Amada $Round Amada $Shape

PUNCH ASSEMBLY ATBPA-m-hd* 111104 209.75 12104 268.60 DIE AT-B-D-* 21101 16.15 22104 43.95

DIE w/SLUG TRAP™ref. P1.12 ATB-Dst-* 29.95 48.70 SET Punch Ass’y HD & Die ATB-PADm-hd* 31104 225.80 32104 314.05

SET P. Ass’y HD Die=Slug Trap ATB-PADm-Dst* 230.05 32104 317.30 PUNCH HD High Speed Steel ATB-Pm-hd-* 41_04 59.95 42_04 102.75 GUIDE ATBG-m* 51104 69.60 52104 84.35

LO

Solid

Solid Punch Head


COLE ENGINEERED

• No Shimming, Lift and Turn of Spring Pack for .004/,1mm increments of adjustment. • Rapid Hit™ achieve faster nibblie rates when used on

Not For Use on Machines with Strikers >1.85” dia. or if striker doesn’t come down centered on punch

Method #2 Holder System

Install in all Sta.B turret pockets. Inventory only punch, stripper & die. Guide=RSP “removable Stripper”

DIE

1¼ Station B SIZE RANGE .501-1.250”/12,7-31,7mm Quick-Set™ Spring Canisters Amada Vipros Compatible

Spring Pack CAN Ass’y -Disc *AATB-CANmd 5000__ 115.00

O-Ring (Retainer to guide) ATBG-Oring-m 9009__ 1.65

O-Ring (Seal on punch head) ATBCAN-Oring 52__k 1.65 Strip Guard Adhesive Disc *A06084 8.60 Pack of 10pc

COMPONENT PARTS CE TOOL Part# Amada# PRICE

Spring Pack CAN Ass’y –Coil *AATB-CANmc 5000__ 75.75

Stripper Plate For RSP guide ATB-S-* 51165k 10.70 Stripper –abs w/Lub Notches ATB-Sabs-* 51865

a 15.00 52165K 25.40

52865a 27.85

Standard Metric Amada Style Punch & Guide

Method #1 Punch Assembly C.E. Part # *= r-round s-shape

Amada Part# $ROUND $SHAPE

Punch Assembly D2 “ “ “ “ M2

ATB-PA-m-qc-* ATB-PA-m-qc-hs-*

195.85 237.55

Above Priced with Solid Guide & Coil Spring +$__ for disc springs

DIE ATB-D-* 16.15 43.95

DIE w/SLUG TRAP™ ATB-D-st-* 29.95 78.70

Method #2 Holder System *A-ATB-QHm-rsp* 192.60 267.50 Removable Stripper Button style Guide, Spring Pack w/disc springs

Punch-D2, Die, Stripper ATB-PSDm-* 71.70 151.45

Punch-M2, Die, Stripper ATB-PSDm-hs-* 86.70 165.85

Punch-M2, Die=SlugTrap Stripper ATB-PSDmh-st* 90.95 174.45 For further parts, see Page 12, Metric: STANDARD AMADA COMPATIBLE

Air Blow MetricAmada Style Punch & Guide

Method #1 Punch Assembly ATB-PAv-q-* 246.10 310.30 Above Priced with Solid Guide & Coil Spring +$__ for disk springs -$__for Coil Spring Style

DIE ATB-D-* 16.15 43.95 DIE w/SLUG TRAP™ ATB-D-st-* 29.95 48.70 Method #2 Holder System *A-ATB-QH-v-rsp-* 288.90 342.40

Removable Stripper Button style Guide, Spring Pack w/disc springs Punch, Die, Stripper ATB-PSD-v* 113.30 188.90 1¼ Guide Vortec-RSP *A TB-Gv-RSP-* 109.15 162.65

For further parts, see Page 12, Metric: AIR BLOW AMADA COMPATIBLE

Method #1 PUNCH

ASSEMBLY Each tool size is inventoried as a complete punch and guide assembly · Faster change over and a more durable hardened guide

TM

C.E.TOOLINGTOOLS

PUNCHRAISES CLOCKWISE

CLOCKWISELOWERS PUNCH

COUNTERTWIST

Standard Vortec- Style Industry Compatible to Amada,

WLS, Ultra


COLE ENGINEERED INCH: Wilson Style Standard Original Series 80 1¼ Station B SIZE RANGE .501-1.250”/12.7-31.7mm

Standard Pricing is for Punch Tip Sizes .093 (2.3mm) and Above

WT COMPATIBLE


*= R-round S-shape

WT Code No.

PRICE ROUND

WT Code No.

PRICE SHAPE

PUNCH ASSEMBLY D2 ATB-PAi-* 01819 157.00 01831 227.55 PUNCH ASSEMBLY M2 ATB-PAi-hs-* 168.00 238.90 DIE ATB-D-* 0202,1/2 16.15 0202,5/6 43.95 DIE w/SLUG TRAP™ ATB-Dst-* 02194 29.95 02195 48.70 SET Punch Ass’y & Die ATB-PADi-* 169.10 257.40

SET Punch Ass’y HSS & Die ATBPADi-hs- 184.05 272.35

PUNCH D2 Steel ATBPi-* 01827 43.25 01839 81.00

PUNCH HS High Speed Steel ATBPi-hs-* 57.80 96.30

GUIDE Solid OEM Style ATB-Gi* 69.60 84.35 Stripper Plate for RSP Guide ATB-S-* 01890/ 10.70 01917 25.40

GUIDE -Removable Stripper ATBGi-rsp-* 2222 109.15 2223 123.05

HEAVY DUTY Max. 3/8 m.s. C.E. Tool Part# *= R-round S-shape WT# ST# $ Round WT # ST# $Shape

PUNCH ASSEMBLY HS ATBPAi-hd-* 111104 202125 209.75 12104 202135 268.60

DIE AT-B-D-* 21101 202131 202136 16.15 22104

202134 202141 43.95

DIE w/SLUG TRAP™ref. P1.12 ATB-Dst-* 202113 29.95 202143 48.70

SET Punch Ass’y HS & Die ATB-PADi-hd-* 31104 225.80 32104 314.05

SET P. Ass’y Die=Slug Trap ATB-PADi-Dst* 31104 230.05 32104 322.10

PUNCH HD Heavy Dutyl ATB-Pi-hd-* 41_04 202127 48.45 42_04 202137 86.45 GUIDE Solid OEM Style ATBGi-* 202129 69.60 52104 84.35 Stripper Plate for RSP Guide ATB-S-* 01890 10.70 01917 25.40



PUNCH HSS (M2) +1º Back taper to assist

stripping, and reduce

gauling

PUNCH 1/8º Back

taper to assist stripping, and reduce gauling

SPRING RETAINE

SPRING

OPTIONAL: Side Lock Punch HEAD


COMPONENT PARTS C.E. Too Part # WT # $Round Amada $Shape

PUNCH HEAD Side Lock AT-B-Hi-sl 20.40 COIL SPRING AT-B-Si 01953 13.95 DISC SPRING Set (20) AT-B-DS-i 55.65 SPRING RETAINER AT-B-SRi 01824 5.90 O-RING ATAG-Oring-m 02222 1.65 Strip Guard Adhesive Disc *A06084 8.60 pack of 10pc

PUNCH HEAD = WT AT-B-Hi 1821 15.00

Optional RSP Guide with Side Load (No Retainer Ring Required). To Ass’y Price + RD +$16 SH+$22 + to

part# -rsp-*

GUIDE: Solid or Removable Stripper plate. Uses retainer ring to secure.


COLE ENGINEERED

Special Use DROP-IN Units 1¼” Sta. B SAVE$• Why tie up thousands of dollars stocking a Guide, Spring, Retainer, and P.Head for every tool size.

Purchase a Holder for each turret station, then order Punches and Dies or Drop-Sets for sizes you wish to stock. • Fast Tool Change, Increase Punch grind life with no shimming! (up to .28” 7,mm in .06” 1,5mm material)

C.E.’s SIDE LOCK PUNCH HEADS: Side Lock design squeezes the punch head threads together, achieving positive and quick adjustment of tool length. (Loosen bolt, turn head to adjust tool length, then re-lock bolt.)

C.E.’s SIDE LOADING STRIPPER Plate: Positive Retention, impossible to fall out during use. No Tools needed to replace stripper. Drop-Holders can use nearly any punch design, making current inventory compatible! Instructions: Screw C.E. Side Lock Adjustment Head on Punch. Slide an Open or Fitted Stripper in Drop-Holder. Drop Punch into Holder. Turn P.Head to Adjust tool Length so that punch tip sits .03-.06 below Stripper face. Lock Bolt in Punch Head.

1¼” Sta. B Heavy Duty Punch up to 3/8” 10 mm mild steel Size Range .031-1.25”/,8-31,7mm Rounds<.5”/12,7m+$5.00 to punch, Shapes<.5” + $8.00 Not for use in Auto Index stations, or turrets requiring adjacent placement of 2 holders (Example Aries) Ideal for EUROMACH

& LVD


*= R-round S-shape Code No.

PRICE ROUND

Code No.

PRICE SHAPE

DROP-IN HOLDER AT-B-DI-s WT02275 358.45

1¼m DROP-SET D2 Steel D2 Punch, Head, Stripper & Die

AT-B-PHSD-m* 86.70 166.40

1¼m PUNCH AESI Style D2 AT-B-P-m* AESI 41804A 44.40 AESI

42804A 81.00

1¼m Head Side Lock ATB-H-m special 10.70

1¼m DROP-SET HSS HSS Punch, Head, Stripper & Die

ATB-PHSDmhs* 97.80 181.40

1¼m PUNCH AESI Style HSS ATBP-M-HS 57.80 96.30

1¼i DROP-SET Inch S80 Style D2 Punch, Head, Stripper & Die

AT-B-PHSD-i* 86.70 166.40

1¼i PUNCH Inch S80 Style AT-B-P-i* WT 01827 43.25 WT

01839 81.00

1¼i Head Side Lock AT-B-H-i WT 01821

1¼i DROP-SET HSS HSS Punch, Head, Stripper & Die

ATB-PHSDihs* 97.80 180.85

1¼ PUNCH AESI Style HSS ATBP-i-hs 57.80 96.30

1¼” STRIPPER PLATE AT-B-S-* AESI51104A

WT01890 10.70 WT01917

AES52104A 25.40

1¼” DIE AT-B-D-* WT0202,1/2 AES21101K 16.15 WT0202,5/6

AES22104K 43.95

DIE w/SLUG TRAP™ ATB-D-st-* WT02194 29.25 WT02195 48.70

15.00

1¼i Standard WT Set Screw Heads can also be used.

1¼sl-i 1¼sl-m Side Lock Side Lock

GUIDE Side Load Stripper No clips or pliers required. Lift punch out and slide stripper out with your thumb.


*= R-round S-shape PRICE

ROUND PRICE SHAPE

1¼i Drop-Holder Keyed 0,90 & 45 + ATB-DI-ae 342.40

Original METRIC Amada Style Style 1¼m Station B 1¼m DROP-SET Metric style Punch D2, Head, Stripper & Die ATB-PHSD-m-* 86.70 166.40

PUNCH D2 Steel Metric Style ATBP-m-* 44.40 81.00

1¼ae-m P. Head Metric Style ATB-Hae-m 15.00

Inch Wt Series 80 Style 1¼i Station B 1¼i DROP-SET S80 style Punch D2, Head, Stripper & Die ATB-PHSD-i-* 86.70 166.40

1¼i Punch D2 Steel Inch Style ATBP-i-* 43.25 81.00

1¼ae-i P. Head Inch S80 Style ATB-Hae-i 15.00

1¼ Stripper Plate RPS ATB-Sm* 7.40 25.40 DIE ATB-D-* 16.15 43.95 DIE w/SLUG TRAP™ ATB-D-st-* 29.25 48.70

Maximum Material (mild steel)

Coil Spring .19”/5mm Optional Disc

Springs 1/4”/7mm Mild Steel

*AATBae-ds

For machines with Strikers > 1.85 Must Use Below

COLE ENGINEERED


COLE ENGINEERED Size Range 1.251-2.000”/31,76-50,8mm DESCRIPTION C.E. Part #

* R-round S-shape Amada# $ROUND Amada# $SHAPE

SET Punch, Die & Stripper pch thread m=metric or i= inch Stripper Styles am, wt, or u

ATC-PDSm-am ATC-PDSm-u-* ATC-PDSi-am* ATC-PDSi-wt-*

31106k Wt_____ 148.75 32106K

Wt_____ 264.30

PUNCH D2 tool steel m=metric or i=inch threads

ATC-Pm-* ATC-Pi-*

41106K Wt_____ 69.55

42106K Wt_____ 115.60

PUNCH HS high speed ATC-Pm-hs* 41___ 95.25 42___ 142.35

STRIPPER 3 Styles Available AM, WT, U

ATC-S-am-* ATC-Swt-* ATC-Su-*

51106K

Wt_____ 25.90 52106K

Wt_____ 35.35

Strip Guard Adhesive Discs *A06085

DIE only ATC-D-* 21106K 55.85 22106K 104.85

DIE w/SLUG TRAP™ ATC-D-st-* 73.35 124.15

for pack of 10

STANDARD AMADA COMPATIBLE C.E. Part # Amada# $Price

LS Guide Assembly *A ATC-GA 90012K 500.00

PUNCH HEAD ATC-PH 90102 32.10

S.H.C.S. (M8X20) ATCDE-8X20 99975 .55

SPRING DISC (18) ATC-SD 90132 102.75

LS PUNCH DRIVER ATC-PD 90112 53.50

Draw Bolt i=1/2”or m= M12 X50 ATC-DB_X50 99944 3.75

LS Guide Keyed 0,90 & 45º *A ATC-G 90072 331.70

KEY (W/M5X8 FH) AT-C-K 90142 35.60

STRIPPER CLIPS W/SCREWS ATCDE-SC 90136 16.60

PUNCH HEAD

DISC SPRING (18)

PUNCH DRIVER

STRIPPER CLIPS (4)

LS™ Lubrication System Take advantage of machine features that allow lubrication through striker (ABS or ALS), with out having to buy expensive holder stystems, often requiring expensive specialty tools such as Vortec™ or Ultra™. You can also manualy fill reservoir with 80-90-weight oil for built in Self Oiling System. Provides lubrication between the punch, guide & turret.

Guide Keyed 0, 90 & 45°

StandardAmada Style Full Body Style 2_Sta.

m Metric M12 threads or

i Inch ½” threads

Punches Equiped with Puller M8 threads

Strippers recessed 2mm for greater punch grind life

Amada Compatible Range 1.182-1.850”/30,01-47,mm

Sta. C, 2” C.E. Tool

Code No. Amada part#

PRICE ROUND

PRICE SHAPE

PUNCH HS steel M14 AT-C-Pv-* 4 1/2 809A 96.30 144.45 STRIPPER Bolt On AT-C-Sv-* 5 1/2 809A 85.60 101.65 STRIPPER Z-style ATC-S-mv-* 5 1/2 896A 33.20 44.95 DIE only AT-C-D-* 2 1/2 106K 55.85 104.85 DIE w/SLUG TRAP™ AT-C-D-st-* 73.35 124.15 Stripper Plate Bolts 4pc AT-CDE-SB-vo 3.75 M14 Bolt w/Trhru Hole AT-CDE-DB-M14X70 90630A 19.30

Vipros-ABS Holder Bolt on Stripper Style

Shown

AIR BLOW & Z-Style Tools

STRIPPER STYLES AM Style for use in CE, or

Amada mfg. Guides ST Style Stripper for use

with Strippit Mfg.Guide+$5.00

WT Style for use with WT Mfg. Guides

U Style for use with Mate

Components compatible for use in Holders Mfg. By CE, Amada, Wilson(Standard & WLS) and Mate® Ultra


COLE ENGINEERED

DESCRIPTION C.E. TOOL CAT. CODE

WT CAT.CODE

ROUND PRICE

WT CAT.CODE

SHAPE PRICE

SET Punch,-D2 Die & Stripper ATC-PDSwt-* 133.75 236.50 SET Punch,-M2 Die & Stripper High Speed ATC-PDSwt-HS* 161.60 257.90 PUNCH D2 Tool Steel ATC-Pwt-* 05026 62.10 05025 104.30 PUNCH High Speed Steel ATC-Pwt-hs-* N/A 70.65 N/A 109.15 STRIPPER Standard ATC-S-wt-* 01848 25.90 01854 35.35 STRIPPER “abs” ATC-S-wt-abs-* 05150 34.25 05151 46.05 DIE ATC-D-* 0185,0/1 55.85 0185,5/6 104.85

DIE “W/SLUG TRAP ATC-D-st-* 02196 73.35 02197 124.15

STRIP GUARD Urethane Adhesive Discs Prevent Marking of Material See Page 5

Punch Options: Coatings or Premium Steel:BEST VALUE: Our optional High Speed Steel. Greater Tool Life than our competitors tools even when coated with TiN (gold)coating.

Further, CE also has TiCN (grey/blue). Coatings available on either of our steels to extend the greatest tool life!

Adapters

enable use of S80/90/HP

Punches and Strippers in

Standard Full Body Punch

Holders. Adapter

Only *A-ATCADWT

$175

Holder & Adapter Compete *A-ATCGAWT $675.

Station C, 2”wt Wilson Style HP™, Series 90® Compatible

For HP™ , LS™ , S80, 90, 90abs, 90wls Holder Styles Although CE manufactures tools to be fully interchangeable with Wilson Tool’s HP™ & Series 90® products, there is no affiliation

between Wilson Tool and CE Tooling. HP™ & Series90® is a registered trade mark of Wilson Tool International.

SIZE RANGE 1.251-2.000”/31,76-50,8mm

See Booklet Section 14 for WT Holder Parts

WT Style Push Button Adjustable Length Holder

Part# *AATCGA80 $930.75

Wire Stripper Retainer being fazed out. New units will use 4pc Industry Standard Clip.


COLE ENGINEERED Size Range 2.001-3.500”/50,81-88,9mm AMADA COMPATIBLE

DESCRIPTION C.E. Part #

* R-round S-shape Amada Code No.

$ Price Round

Amada Code No.

$ Price SHAPE

SET Punch, Die & Stripper pch thread m=metric • i= inch Stripper Styles am, wt, or u

ATD-PDSm-am ATD-PDSm-u-* ATD-PDSi-am* ATD-PDSi-wt-*

31108K

Wt_____

222.60 32806

K

Wt____

359.80


ATD-Pm-* ATD-Pi-*

41108K

Wt____ 99.55 42108K

Wt____ 159.20

PUNCH high speed ATD-Pm-hs-* 41___ 131.65 42___ 209.75

STRIPPER Available as am, wt, u

ATD-S-am-* ATD-Swt-* ATD-Su-*

51108K

Wt____ 31.75 52108K

Wt____ 52.90

Strip Guard Adhesive Discs *A06086

DIE only ATD-D-* 21108K 78.45 22108K 147.70 DIE w/SLUG TRAP™ ATD-Dst-* 98.45 161.50

66.90 for pack of 10

STANDARD AMADA COMPATIBLE C.E. Part # Amada# $Price

LS Guide Assembly *A ATD-GA 90013K 700.00

Punch Head ATD-PH 90103 40.70

S.H.C.S. (M8X20) ATCDE-8X20 99975 .55

Spring Disc (7) ATDE-DS 90133 146.90

LS Punch Driver ATD-PD 90117 107.00

DRAW BOLT i=1/2”orm= M12 X70 ATDE-DB_X70 99948 3.75

LS Guide Keyed 0,90 &45º *A ATD-G 90065 390.55

Key (W/M5X8 FH) AT-DE-K 91011 34.25

STRIPPER CLIPS W/SCREWS ATCDE-SC 90136 16.60

PUNCH HEAD

DISC SPRINg (7) Required

PUNCH

STRIPPER CLIPS

PUNCH DRIVER

CE G

uide

Key

ed

0,90

& 4

5°


i Inch ½” threads Punches Equiped with

Puller M8 threads

Strippers recessed 2mm for greater punch grind life

AM Style Stripper for use in CE, & Amada mfg. Guides

ST Style Stripper for use with Strippit

Mfg.Guide+$5.00

WT Style Stripper for use with Wt Mfg.

Guides U Style fits with Mate

Mfg. Guides

Amada Compatible Range 1.851-3.370” 47,01-85,6mm

DESCRIPTION C.E. Part# *= R-round S-shape

PRICE ROUND

PRICE SHAPE

PUNCHHS M14 thread AT-D-Pv-* 107.00 169.60 STRIPPER Bolt On AT-D-Sv-* 107.00 117.70

DIE only AT-D-D-* 78.45 147.70 DIE w/Slug Trap™ AT-D-D-st-* 98.45 161.50 Stripper Plate Bolts 4pc AT-CDE-SB- 3.75 M14 Bolt w/Trhru Hole ATCDEDBM14X70 19.30

4 1/2 808K 5 1/2 808A

2 1/2 108A

STRIPPER Z-style AT-D-Smv-* 5 1/2 898A 46.05 66.90

Standard Amada Style Full Body 3½” Sta. D



Components compatible for use in Holders Mfg. By C.E., Amada, Wilson(Standard & WLS) & Mate® Ultra


Shown


COLE ENGINEERED

DESCRIPTION C.E. TOOL CAT. CODE

WT CAT.CODE

ROUND PRICE

WT CAT.CODE

SHAPE PRICE

PUNCH D2 Tool Steel ATD-Pwt-* 05028 81.35 05027 124.70

PUNCH High Speed Steel ATD-Pwt-hs-* N/A 120.40 N/A 149.80

STRIPPER Standard ATD-S-wt-* 01864 31.75 01869 52.90 STRIPPER “abs” ATD-S-wt-abs- 05152 447.60 05153 69.95

DIE ATD-D-* 0186,5/6 78.45 0187,0/1 147.70 DIE “W/SLUG TRAP ATD-D-st-* 02198 98.45 02199 161.50

SET Punch,-D2 Die & Stripper ATD-PDSwt-* 207.35 330.10

SET Punch,-M2 Die & Stripper High Speed Steel ATD-PDSwt-HS* 343.45 354.75

Punch Options: Coatings or Premium Steel:BEST VALUE: Our optional High Speed Steel. Greater Tool Life than our competitors tools even when coated with TiN (gold)coating. Further, CE also has

TiCN (grey/blue). Coatings available on either of our steels, to extend the greatest tool life!

For HP™ , LS™ , S80, 90, 90abs, 90wls Holder Styles Although CE manufactures tools to be fully interchangeable with Wilson Tool’s HP™ & Series 90® products, there is no affiliation

between Wilson Tool and CE Tooling. HP™ & Series90® is a registered trade mark of Wilson Tool International.

SIZE RANGE 3.501-4.500”/88,92-114,3mm Station D 3-1/2”wt Wilson Style HP™, Series 90® Compatible

2” 10P *A06085 3-1/2 3.67 10pc *A06086 66.90 4-1/2 4.67 10pc *A0608_

STRIP GUARD Urethane Adhesive Discs Prevent Marking

Ds

Adapters enable use of S80/90 Punches and Strippers in Industry Standard Full Body Punch Holders.

Sta.D 3½ Adapter Only: *A-ATDADWT Full Holder *AATDGAWT $

*A-449

WT Compatible S80+ HoldersAvailable!

Part# *AATDH-EGLD1

Go To Booklet Section 14 for WT Holder Component Parts

Guide has BOTH Clip & Wire Ring Stripper Retainer

WT Style Push Button Adjustable Length Holder

Part# *AATDGA80 $1,304

Wire Stripper Retainer being fazed out. New units will use 4pc Industry Standard Clip.


COLE ENGINEERED SIZE RANGE 3.501 - 4.500”/88.92 - 114.3mm

PUNCH HEAD

DISC SPRING (7)

PUNCH DRIVER

STRIPPER CLIPS

GUIDE

STANDARD AMADA COMPATIBLE C.E. Part # Amada# $ Price

LS™GUIDE ASSEMBLY *A ATE-GA 90014K 850.00

PUNCH HEAD ATE-PH 90104 42.80

S.H.C.S. (M8X20) ATCDE-8X20 99975 .55

SPRING DISC (7) ATDE-SD 90133 146.90

PUNCH DRIVER ATE-PD 90114 128.40 DRAW BOLT i=1/2”orm= M12 X70 ATDE-DB-_X70 99948 3.75

GUIDE Keyed 0,90º *A ATE-G 90074 449.40

KEY (W/M5X8 S.H.C.S.) AT-DE-K 91011 34.25 STRIPPER CLIPS W/SCREWS AT-CDE-SC 90136 16.60

AMADA Compatible DESCRIPTION

C.E. Part # * R-round S-shape

Amada Code No.

$-Price Round

Amada Code No.

$-Price Shape

SET Punch, Die & Stripper punch thread m=metric or i= inch Stripper Styles am, wt, or u

ATE-PDSm-am ATE-PDSm-u-* ATE-PDSi-am* ATE-PDSi-wt-*

31109K

Wt____ 414.10 32109K

Wt____ 587.45


ATE-Pm-* ATE-Pi-*

41109K 161.60 42109K 246.10

PUNCH HS high speed ATE-Pm-hs-*

41____ 201.20 42___ 283.55

STRIPPER Available as am, wt, u

ATE-S-am-* ATE-Swt-* ATE-Su-*

51109K

Wt____ 59.95 52109K

Wt____ 84.55

Strip Guard Adhesive Discs

*A06086

DIE only ATE-D-* 21109K 179.80 22109K 230.15 DIE w/SLUG TRAP™ ATE-D-st-* 203.30 278.20

66.90 pack of 10

Components compatible for use in Holders Mfg. By C.E., Amada, Wilson(Standard & WLS) & Mate® Ultra

Amada Compatible Range 3.501-4.350”/88,9-110,5mm C.E. Part# $ Round $ Shape

PUNCH HS M14 thread AT-E-Pv-* 183.80 291.60 STRIPPER Bolt On AT-E-Sv* 139.10 155.15

DIE only AT-E-D-* 179.80 230.15 DIE w/SLUG TRAP™ AT-E-D-st-* 203.30 278.20 Stripper Plate Bolts 4pc AT-CDE-SB-v 3.75 M14 Bolt w/Trhru Hole AT-CDE-DB- 19.30

STRIPPER Z-style AT-E-Smv 69.55 90.95

4 1/2 809A 5 1/2 809A 5 1/2 899A

2 1/2 109A

StandardAmada Style Full Body Style 4½ Sta.




i Inch ½” threads

Punches Equiped with Puller M8 threads

Strippers recessed 2mm for greater punch grind life AM Style Stripper for use in CE, & Amada mfg. Guides ST Style Stripper for

use with Strippit Mfg.Guide+$5.00

WT Style Stripper for use with Wt Mfg.

Guides U Style fir ys with Mate Mfg. Guides

Add Diagram for Mate Ultra


Shown


COLE ENGINEERED

Wilson Style HP™, Series 90® Compatible SIZE RANGE

3.501-4.500”/88,92-114,3mm For HP™ , LS™ , S80, 90, 90abs, 90wls Holder Styles

Although CE manufactures tools to be fully interchangeable with Wilson Tool’s HP™ & Series 90® products, there is no affiliation between Wilson Tool and C.E. Tooling. HP™ & Series90® is a registered trade mark of Wilson Tool International.

Station E, 4-1/2”wt

DESCRIPTION C.E. Part # WT Part# ROUND PRICE WT part#

SHAPE PRICE

PUNCH D2 Tool Steel ATE-Pwt-* 05030 123.05 05029 190.50 PUNCH .25”&<X 4”&> High Speed Steel ATE-Pwt-hs-* N/A 155.15 N/A 233.30 STRIPPER Standard ATE-S-wt-* 01877 59.95 01882 84.55 STRIPPER “abs” ATE-S-wt-abs-* 05154 74.90 05155 98.45 DIE ATE-D-* 0187,8/9 179.80 0188,3/4 230.15 DIE “W/SLUG TRAP ATE-D-st-* 02200 203.30 02201 278.20

SET Punch,-D2 Die & Stripper ATE-PDSwt-* 364.90 531.80 SET Punch,-M2 Die & Stripper High Speed Steel ATE-PDSwt- 397.00 574.60

2” 10P *A06085 3-1/2 3.67 10pc *A06086 66.90 4-1/2 4.67 10pc *A0608_

STRIP GUARD Urethane Adhesive Discs Prevent Marking

Punch Options: Coatings or Premium Steel:BEST VALUE: Our optional High Speed Steel. Greater Tool Life than our competitors tools even when coated with TiN (gold)coating.

Further, CE also has TiCN (grey/blue) Coatings available on either of our steels, to extend the greatest tool life!

Go To Booklet Section 14 for WT Holder Component Parts

Guide has BOTH Clip & Wire Ring Stripper Retainer

Adapters enable use of S80/90 Punches

and Strippers in Industry Standard Full Body Punch Holders.

Sta.E 4½ Adapter Only: *A-ATEADWT

$294.25 Full Guide

Assembly =Holder *AATEGAWT

$1,100.00


COLE ENGINEERED

Standard, LS™, & Vortec™ Style Shearing Tools 3½” Sta. D Stocked Sizes .25”X3” & 5,mmX84,mm 4½” Sta. E Stocked Sizes .25”X4” & 5,mmX110,mm

AMADA COMPATIBLE C.E. Tool ## AMADA# $ Sta. D AMADA# $ Sta. E C.E. Tool # AMADA# ABS

$Sta. D AMADA# ABS

$ Sta. E

PUNCH D2 steel AT_P-m-S 42108 159.20 42109 246.10

PUNCH HSS steel AT_P-m-HS 209.75 283.55 AT_Pv-s 169.60 291.60 STRIPPER PLATE AT_S-bp-sh 52916 240.75 52917 272.85 AT_Sabs- 52916A 52917A DIE only AT_D-sh-S 22916 214.00 22916 314.60 AT_D-sh-s 22916K 214.00 22916K 314.60 DIE w/SLUG TRAP™ AT_Dsh-st- 240.75 341.35 AT_Dshst-s 240.75 341.35 GUIDE ASSEMBLY Excludes Punch & Stripper *aAT_GAsh 90016 790.50 90017 1005.80 *aAT_GAsh 90016a 90017a

PUNCH HEAD AT_PH 90010 40.70 90105 42.80

SPRING DISC (7) ATDE-SS 90133

PUNCH DRIVER AT_PD 90113 107.00 90117 128.40

Draw Bolt 12x70 ABS=14x70 ATDE-DB- 99948 3.75

GUIDE Keyed 0,90º *a AT_G-sh 90916 410.10 90065 443.80

KEY (W/M5X8 FH) AT-DE-K 91011 34.25

STRIPPER PLATE BOLT ATCDE-SB 99941 16.60

146.90

Standard Amada, or LS™ STYLE ABS Vortec or LS™ Style Holders

Sta. D 3½”

WORK CLAMPS *= PUNCH KEY

*

*

*

*

*

*

Sta. E 4½”

Reduce cost of common used slotting punches Size Range Width .125 (3,mm) - .500 (12.7mm)

Length 1.968” (50,mm) -4.400(110,8mm)

Note: Our High Speed Steel Blades offer reduced gauling and greater wear

resistance than our competitions D2 or A8 Steel,

even when coated with TiN or TiCN

+ Either TiN or TiCN coating to CE blades

Add $45.00 and 5 Days to Delivery. Order 3+ Blades, pay only $30.00 per

blade.

Industry Standard Insert Blades Ref. AES # 90115A, 90120A, 90116A,

90121A, WT# ________ SHEAR + to insert cost

Single Inverted $8.00 Double Inverted $15.00

BODY COST Station Catalog Code PRICE

D, 3-1/2_ *A-ATD-IH_ E, 4-1/2_ *A-ATE-IH_

_=m-M12 or i-1/2” Thread Vortec ABS Style D, 3-1/2v *A-ATD-IHv E, 4-1/2v *A-ATE-IHv

CE or WT INSERT BLADES & HOLDERS Compatible with CE, WT, and similar Mfg. Blade Holders.

BLADE CE Part# WT # PRICE 1+

1.968 - 3.400 50,mm - ATD-IB-RT

1967 5657 3193 128.40

3.401-4.400” 86,mm-110,mm ATE-IB-RT

1970 5630 161.60

Spare Bolts w/lock washer

ATE-IH-BW 2.70

SHCS 3/8-16 X 1 1/2” Long

Price 3+

123.30

155.15

2.60

Price 6+

Insert BLADES For use in Original Full Body Holders

Amada Style 6” Sta. F SIZE RANGE 4.501-6.000”/114.3-152.4mm

DESCRIPTION CE PART # ROUND SHAPE

PUNCH ATF-P-m-* 417.30 483.65

STRIPPER ATF-S-am- 80.25 109.15

DIE ATF-D-* 270.75 379.85


COLE ENGINEERED

Original METRIC or Quick-Set™ Style Packages Prices are not valid with any other discount program • Distributors: Limited Commission/Discounts available

Further, we would suggest buying 2 sets of .250X4.000 Rectangle to be used in your largest station as slotting tools, one set 0 ° one 90°. Cost for these would be $ (extra dies $)

Total Cost for 9 package A-I, (no Sp44 or Counter Sinks) is $, With extra, 2 sets of dies $

Send in your own specific tooling list to receive an itemized quotation!

Package 21 ROUNDS ½m Punch Assemblies & Dies

*AATTP3A .093 .098 .125 .128 .141 .156 .172 187 .194 .203 .219 .250 .266 .281

.312 .344 .375 .406 .437 .469 .500 Extra Set of Dies *AATTP3Ad

A

P

SPR

SPRET

GU

PU

GROLOC

Package 22 ROUNDS Sta. C:22,Punches & Dies,

6 Strippers Sta. D: 10,Punches & Dies,

5 Strippers *AATTP3C 1.312 1.375 1.437 1.5 1.562 1.625 1.687 1.75 1.812 1.875

1.937 2” 2.125 2.25 2.375 2.5 2.625 2.75 2.875 3” 3.25 3.5”

22 Extra Dies *AATTP3Cd

Package 4 SQUARES 4 Punches & Dies, 2 Stripper

*AATTP3E 1”square Sta.C & 2”sq. Sta.D

Extra Set of Dies*AATTP3Ed

Package 4 RECTANGLES 4 Punches, 2 Stripper, 4 Dies.

Sta.D *AATTP3G .200X2”& .250X2”

Sta.C .200X3”& .250X3” Sta.D/Stripper .250X2.0”

& .250x3.0” 4 Extra Dies *AATTP

2” Sta. C Guide Assemblie ATCGA $. ea<5%

Package of Four (4) *AATTP3L

3½”Sta.D Guide Assemblies ATD-GA $ ea. <5%

Package of Four (4)*AATTP3M

4½” Sta.E Guide Assemblies ATE-GA $ ea. <5%

Package of Two (2)*AATTP3N

Further: (4) Sta.C 2” Guide Assemblies which are $ 505.05 each Save 5% on 4pc=1919.19 (2) Sta.D 3-1/2” Guide Assemblies which are $ 711.55 each Save 5% on 2pc= $1351.95 (2) Sta.E 4-1/2” Guide Assemblies which are $ 845.30 each Save 5% on 2pc= $1606.07

Package TP3F 6 Rectangles 6 Punch Assemblies & Dies

*AATTP3F .125X.5” .125X1.0 .187X.5” 250X.5” .250X1.0 .375X1.0”

Extra Dies *AATTP3Ed

PUNCH HEA

SPRINGRETAINER

GUIDE

PUNCH

STRIPPER

PLATE (RSP

SPRING

GROUND

LOCATION KEY

Package 19 ROUNDS 1¼m Punch Assemblies & Dies

*AATTP3B .515 .531 .562 .594 .625 .656 .687 .719 .750 .781 .812 .844 .875 .937

1.000 1.062 1.125 1.187 1.250 Extra Dies *AATTP3Bd

PUNCH

SPRINRETAIN

GUID

PUN

STRIP

PLATE

SPRIN

GROUN

LOCATION

Package 7 SQUARES 2 ½m Punch Assembly & Die

5 1¼m Punch Assembly & Die *AATTP3D

.25sq .313sq .375sq .438sq .500sq .750sq .875sq

Extra Dies*AATTP3Dd

ADJUSTABLE

PUNCH HEAD

SPRING

SPRINGRETAINER

GUIDE

PUNCH

GROUNDLOCATION KEY

PUNCH H

SPRINGRETAINER

GUIDE

PUNC

STRIPPE

PLATE (R

SPRING

GROUND

LOCATION K

Package Sp-44 4-Way Radius 4way .2web Radius Tools

Quantity 5: Punch Ass’y&Dies *AATTP3J

.063, .125, .188, .25, .312 5 Extra Dies *AATTP3Jd

Package 4-82º Countersink 1 Holder 4 Inserts 4 Dies

*AATTP3K #4, #6, #8, #10 Screws Ref. P7-9

Package 9 OBROUNDS 4 ½m Punch Assemblies & Dies

5 1¼m Punch Assemblies & Dies *AATTP3H

.125X.375 .187X.375 .219X.5 .25X.5” .25X1” .312X1” .375X1”

.437X.875 .5X1” Extra Dies*AATTP3Hd

ADJUSTABLE

PUNCH HEAD

SPRING

SPRINGRETAINER

GUIDE

PUNCH

GROUNDLOCATION KEY

PUNCH

SPRINRETAINE

GUIDE

PUN

STRIPP

PLATE (

SPRIN

GROUN

LOCATION

Package 6 OBROUNDS 6 ½m Punch Assemblies & Dies

*AATTP3I .01” wider & 2X dia. of screw size .122X.224 .148X.276 .174X.328 .200X.380 .226X.437 .26X.5”

Extra Dies *AATTP3Id

Tool Storage Racks and Carts See our Section 10 Retail Booklet for details

Upgrade to Quick-Set™ units for all 1/2 & 1¼ + $40.00 for every 1/2” Sta. A Punch Assembly, +$ for all 1¼ Punch Assemblies.

Cost for the 9 different packages (Sp-44 & Counter sink not included) listed above totals $____With an extra set of dies (different clearance) add $3,353.40 = $16,678.80

COLE ENGINEERED


COLE ENGINEERED

ADAPTERS for Popular Tool Styles USE MANY POPULAR TOOL STYLES IN YOUR THICK TURRET MACHINE

C=2” through E=4½ Punch Adapters are either designed to install in Industry Standard Guide Assemblies. (shown left) If described as Driver Adapter, you must replace standard driver and replace with Adapter Driver. Also Center bolt is changed.

Style St Thick Turret Adapter station and Adapter Price

112/212 B B=1¼m Punch Adapter

suggested for use with QuickSet Holder

ATB-2WB-P *AATBQHmrsp-s

112/212 C C=2”

Punch Adapter

For use in Full Body style

Guide Assembly

ATC-2WC-P

112 2W

D ATB-2WD-P

ATB-2BD-P E

D=3½ ATB-2WEF-P F G E=4½ ATB-2WG-P

212 =2B =906

D D=3½

Driver Adapter For use in Metric Style Guide As-

sembly Ref. 3-10&11 To purchase com-

plete Adapter Guide Assembly, take

standard LS Guide price, - standard Driver + Driver-

ATB-2BD-P E

ATB-2BEF-P F G E=4½ ATB-2BG-P

114

=4W

B C=2” ATB-4WB-P C D=3½ ATB-4WC-P D D=3½ ATB-4WD-P E E=4½ ATB-4WEF-P F F=4½

112 =2W

or 212 =2B =906

B B=1¼

Die Adapter

ATC-2WB-D C

C=2” ATC-2WC-D

D ATC-2WD-D E

D=3½ ATD-2WE-D

F ATD-2WF-D G E=4½ ATE-2WG-D

212 Set:4½ Sta.E(Full Body ATE-2BG-PD

114 =4W

C 114 Sta. Set: 2” Sta.C(Full Body ATC-4WB-PD C 114 Set: 2” Sta.C(Full Body ATC-4WC-PD D 114 Sta. Set:3½”Sta.D(Full Body ATD-4WD-PD E 114 Sta. Set:4½ Sta.E(Full Body ATE-4WE/F-PD TRUMPF Size I Punch Adapter ATC-TR1-P TRUMPF Size I Die Adapter For ATC-TR1-D TRUMPF Size 2 Punch Adapter ATD-TR2-P TRUMPF Size 2 Die Adapter For ATD-TR2-D

TRUMPF

TR

Strippit® Punch Adapter Only

Adapter Description 10 gage Max. Material

Adapter Cat.Code

Price

1¼ ” for Sta. B 1¼” Sta. B Punch Adapter ATBP-STCP

Comes Complete with Drop-In style Holder, which excepts Replaceable Stripper Plates

Station Adapters for Thick Turret

KEYED 0,90,180,270

To Use Description Cat. Code Price A in B Punch ATB-P-adapter $214 A in B Die ATB-D-adapter $192 B in C Punch ATC-BPA $385 B in C Die ATC-BDA $321 B in D Punch ATD-BPA $385 B in D Die ATD-BDA $321

Sta. A to B 1/2” to 1¼

Shown

Replaceable Stripper Plates Use Stripper with larger Round Open-

ings, or get fitted strippers .010 > punch size.

1¼ Stripper Plate ATB-S-* RD= Shaped=

3½” for Sta. D 2” Sta. D P.Adapter For punches up to 2” dia.

ATCP-STEP

3½” for Sta. D 3½ Sta. D Punch Adapter For punches up to 3.5” dia.

ATDP-STEP

3½” for Sta. E 4½ Sta. E Punch Adapter For punches up to 3.5” dia.

ATEP-STEP

Below adapts Strippit 3-1/2” Punches to 2”, 3-1/2” or 4-1/2” Sta. C, D or E Thick Turret

Holder styles which accept Full Body Punches. Thick Turret Stripper plates should be ordered for use with Strippit punch/ See Section 3 page 16-20

See Section 3 page 11 for de-tails on both styles of Drop-In

Holders shown here.


COLE ENGINEERED

.6299 16.0mm

3.93

7”

100m

m

1/8

Dow

el

.812HX.246 .3dX.025 Hit Pointt

63”

MTQ-8 .030-0.630” 8-16.0mm PUNCH or DIE Grind Life: .060”/1,5mm

.29”

1.052”diameter .125 thick

1.000” 25.4mm

LVD

MT

& S

tripp

t Thi

ck

.70”

=17.

8mm

3/16 dowel .34 up

STATION Shape Punch Part#

PRICE M2 Steel

Die Part#

PRICE A2 Steel

Stripper Part#

PRICE

SET Part#

PRICE

N 8 Sta.

Round MTNP-r 25.70 MTND-r 27.85 MTNS-r 7.50 MTNPDS-r 61.00

Shape MTNP-s 62.10 MTND-s 51.40 MTNS-s 15.55 MTNPDS-s 129.50

NISSHINBO MULTI-TOOL (MT) Pricing is for Punch Tip Sizes .093(2,3mm) & Above

8 Stations for Sta. D auto index

CE style N Range .030-0.630” 8-16.0mm PUNCH Grind Life: .060”/1,5mm Minimum length = DIE Grind Life: .06”/1,5MM Minimum length =

Slug Trap™ Die

.290” • 1.052Ø

1.000” 25.4mm

.7

17,8

mm

Shapes, 3/16 dowel X .10 extention

1.052”diameter 125 thick flange

. ” mm

”

mm

1/8 Dowel

. ”

Strippit/LVD Multi-Tool (MT) Pricing is for Punch Tip Sizes .093(2,3mm) & Above

STATION Punch Part#

PRICE M2 Steel

Die Part#

PRICE A2 Steel

Stripper Part#

PRICE

SET Part#

PRICE

Q 8 Sta.

Round MTQP-r MTQD-r MTQS-r MTQPDS-r

Shape MTQP-s MTQD-s MTQS-s MTQPDS-s

Round MTRPh-r MTRD-r MTRS-r MTRPhDS-r Shape MTRP-s MTRD-s MTRS-s MTRPhDS-s

R 3 Sta.

MTR-3 -01.250” -31.75mm PUNCH or DIE Grind Life: .060”/1,5mm

..594

” Tal

l=S

TMT3

D*

.25” 1.572ØX1.43 120”flange

Punch= ATBPwL* Head= MTRH

.594

” 1.875 47.6m...

3/16 Dowel


COLE ENGINEERED

EXCLUSIVELY From C.E. TOOLING The QUICK-SET™ This patented tool length adjustment unit allows for set up of form

tools length to as close as .0025” with only a lift and turn of

the outer knurled collar.

Length can’t change during use. A half to one hour set up time

is now reduced to minutes.

SPECIAL APPLICATION FORMING TOOLS HIGHER PRODUCTIVITY THROUGH SUPERIOR ENGINEERING

THREAD FORM DOWN ONLY

C

C.E.TOOLING

TO ADJUST, LIFT & TURN

Replaceable Top Inserts *FIP81 Bottom *FID81 Ordering Notes: Order by Screw & Thread size Limitations Thread Pitch must be < than material thickness. Contact C.E. Tooling Engineers with your specific needs, and they can discuss the feasibility and pricing for Thread

EMBOSSES ROUND OR SHAPED

Form Down Sp74 Form Up Sp63

D < 45º DIE w/Built in Stripper Quick-Set™ Punch and Die Cat. Code *FAT_PD-D72

D >= 45º DIE w/No Stripper Quick-Set™ Punch and Die Cat. Code *FAT_PD-D72

AB

CD

D < 45º DIE w/Built in Stripper Quick-Set™ Punch and Die Cat.

Code *FAT_PD-U63

D>= 45º DIE w/No Stripper Quick-Set™ Punch and Die Cat.

Code *FAT_PD-U63

A

B

C

D

EXTRUSION

BRIDGE TOOL SINGLE Sp-65 DOUBLE Sp-66

A

B

C

D

E

EF G

SP-65 SP-66

GROUND SYMBOL Keyed 4 Ways Standard=1/2”Ø +$50 for non standard Longest horizontal line=3/8 length DOWN 1¼ w/Quick-Set $ ½” no Quick-Set UP 1¼ w/Quick-Set ½” not available DOWN 1¼ w/Quick-Set $ ½” no Quick-Set UP 1¼ w/Quick-Set $ ½” not available

A

B

R

Unlimited Length Width Nibbles

Standard “A” “B” “R” Size 3/8 3/16 3/16

Punch is made for a

specific material & thickness

Other sizes available

PROGRESSIVE STIFFENING RIB

ELECTRICAL KNOCK OUTS SINGLE Sp-60 DOUBLE Sp-61

ABC A BC

D

Pipe Actual Size Pipe Actual

Size 1/2 .875 1½ 2.000 3/4 1.125 2” 2.500 1” 1.375 2½ 3.000 1¼ 1.750 3” 3.625


COLE ENGINEERED

LOUVER & CARD GUIDE TOOLS

C

B

D

E

AA

BCD

(11 GAGE MAX.)

(11 GAGE MAX.)

DIE ASS'Y FOR LOUVER'S DIE ASS'Y FOR CARD GUIDE

POCKET INSERT

FORMINGINSERT

CUTTINGINSERT

POCKET

INSERT

FORMING INSERT


C.E. TOOLING OFFERS BOTH STANDARD AND PROGRESSIVE STYLE LOUVERS AND CARD-GUIDES. PROGRESSIVE TOOLS ARE MADE TO EXACT MATERIAL THICKNESS. THE LENGTH IS UNLIMITED THROUGH NIBBLING OPERATION. Reference P3.23 for further information

Standard LOUVER Sizes

Form Down LOUVER STD. PUNCH INSERT FOR

MASTER HOLDER

“A” Length “B” “C” “D”

2” 2-1/2” 1/2” 3/16” 3/4”

3” 3-1/2” 5/8” 1/4” 15/16

4” 4-1/2” 3/4” 1/4” 1-1/8”

PROGRESSIVE STIFFENING RIB

A

B

R

Unlimited Length Width Nibbles

Other sizes available

Standard “A” “B” “R”

Size 3/8 3/16 3/16

Punch is made for a specific material thickness

Sheet Lifter Dies

Lifter dies are placed in your turret on each side of a special forming tool. When the sheet passes through this section of the turret, these lifter dies will lift the sheet up to the height of the form die, preventing the sheet from colliding with the forming die which at times causes the sheet to break the grip of the work holder clamps.

1/2” Sta-A ATAD-Lifter

1-1/4” Sta.B ATBD-Lifter

LANCE & FORMS

FORM OF 90 DOUBLE BEND

E=WIDTH

C C

D AB=.250 MAX.

SP-78 SP-80

C

LESS THAN 90

SP-79

OF TAB

DOUBLE BEND

A

SP-77

C

B

YLE

STYLE

LANCE STYLE

OPEN STYLE

FSTC-PSR

STC-QS-H

FSTC-PB-

OLD SPRING


C.E.TOOLINGCOLE ENGINEERED

TOOLS


COLE ENGINEERED

C.E.TOOLING


Adjust the Quick-Set™ to its shortest length by lifting and rotating

of knurled collar clock wise.

MASTER PUNCH HOLDER

Code *FSTCMPH O-RING Code *FMPH

INSERT CHANGING INSTRUCTIONS: While holding die base, pull knurled portion of the insert plate apart from the die base. If replacing with new insert, first

check that I.D. hole in the stripper plate, is large enough to allow insert to go through. Insert the Insert Plate into die

assuring alignment of the pin extending out of the die base to mate with one of two holes in the stripper plate.

To keep the die base in good working order and prolong its life, periodically add grease to the shoulder bolts and the

rubber “O”-ring in the center I.D. hole.

INSERT PLATE Included with each die insert

STRIPPER PLATE .28 I.D. Cat. Code *FCDIPD 53” I.D. Cat. Code *FCDIPV

DIE BASE Cat. Code *FATBMDB

There are two different style inserts that can be used in this unit. One style of insert requires a .28”(7,mm) I.D. hole through the stripper plate. The second style has a .53”(25,4m) I.D. hole. (.28” I.D.Stripper is most common. It is used for Form up Extrusions and Half Shears. Use of .53 I.D Stripper is only used for form up coin tools.

for.

SAVE! MASTER FORM TOOL HOLDER Accepts Inserts to perform common form Aplications

WT Style Holder Units Amada Style Holder Units

PUNCH CHIP

INSERT RETAINER

Part#*FCPIR

URETHANE P.STRIPPER

Form-Down Yellow Part# *FCPUD

Form Up Orange Part# *FCPUU

Shown Standard Head Easy Adjust Head Available

Easy Adjust Head /Option + Solid Non-Insert Punch

Shown Below

CE offers Compatible Amada Style components for your exhisting tooling investment.

THOR D2

EASY ADJUST HEAD

C

B

D


COLE ENGINEERED

AB

.250 MAX.

Replaceable Insert Top *FIP51

Bottom *FID51

TWO HALF-SHEARS

USED FOR SHEAR STOPS

TWO HALF SHEARS USEDFOR ALIGNING TWO SHEETS

CENTER POINT

Replaceable Insert For CE Holder Top

*FIP58 Bottom *FID53 .

For WT Top *FIP58wt Bottom *FID53wt

Replaceable Insert For CE Holder Top

*FIP57 For WT *FIP57wt

For Amada . Use with No hole Die ATB

-Dr

HALF SHEAR FORM DOWN OR FORM UP

Master Unit Accepts Replaceable Half Shear Insert .25”(6,1mm) Maximum B dimension Dedicated Quick-Set Punch Holder and Die must be used for Inserts/Chips For CE Holder: Top *FIP51 Bottom *FID51 For WT Style Holder P.Chip = CE# *FIP51wt D.Chip = CE *FID51wt For sizes>.25”(6,1mm) *FIPWT56 For Amada Style Holder code Set PA203202S Punch Ass’y PA203202P Die Ass’y PA203202D P. Chip 8700069 = CE *FIP51am D. Chip 5511491 = CE *FID51am code=*fipWT-56 sizes > .25”(6,1mm)

Form Inserts for CE, WT & Amada Style Holders

COINING /Counter Sink Inserts/Chips For pre-pierce hole size, See chart/formula in Technical Reference booklet Section 1 pg 20

EXTRUSIONS INSERTS

A

BMAX..250

A

B.500

MAX.

Down *FIP54 Up *FIP50 & *FID50

HEIGHTDETERMINE

BY PRE-PUN

NO ROLL-OVER

PRE-PUNCHHOLE

C

B

D

A

HRECOMMENDED IF "H" ISTHICKER THAN MATERIAL

CE

B

C

.6320

CE Style Insert *FIPCE-56 Ø.500

.50

WT

BC

WT Style Insert *FIPWT-56

Ø.472

.58

AMADA

B

Amada Style Chip #43114 CE #*FIPTH-56 A

B

CD=ANGLE

.500 MAX.

Form Up

CEB

Dedicated die is suggested over

Sta.A 1/2” Dedicate Form Down Coin can be order in stan-dard style assembly. Penetration adjust-ment is accomplished with Side Lock Punch Head

Side Lock

Head ADJUSTABL

PUNCH HEA

SPRING

SPRINGRETAINER

GUIDE

PUNCH

GROUNDLOCATION KE

NCH


COLE ENGINEERED

1¼ Sta.B Double

Row

1¼ Sta.B Single

Row

3½Sta.D Double

Row

FORM UP FORM DOWN

3½Sta.D Single Row

SET *FATD-SSU *FATD-SSD PUNCH *FATD-PBB *FATD-PSD

Cartridge *FATD-DCS *FATD-CS Die Complete *FATD-SDU ATD-D-s-0

2”Sta.C Single Row

SET *FATC-SSU *FATC-SSD PUNCH *FATC-PBB *FATC-PSD

Cartridge *FATC-DCS *FATC-CS Die w/C *FATC-SDU ATC-D-r

SET *FATC-SDU *FATC-SDD PUNCH *FATC-PBB *FATC-PDD Cartridge *FATCDCD *FATC-CD Die w/C *FATC-SDU ATC-D-r

Catalog Price Catalog Price SET *FATB-SSU 586.20 *FATB-SSD 533.35

PUNCH *FATB-PBB *FATB-PSD 265.90 Cartridge N/A *FATB-CS 155.15

Die Complete *FATB-SDU *FATB-SDD

SET *FATB-SDU *FATB-SDD

PUNCH *FATB-PBB *FATB-PDD

Die *FATB-DDU ATB-D-s-0

SET *FATD-SDU *FATD-SDD PUNCH *FATD-PBB *FATD-PDD

Cartridge *FATDDCD *FATD-CS Die Complete *FATD-DDU ATD-D-s-0

2”Sta.C Double

Row

Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16

Qty Per Row 20 12 10 6 20 12 10 6

Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16

Qty Per Row 20 12 10 6 20 12 10 6

Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 48 31 24 16 50 32 25 16




4½Sta.E

Single Row

SET *FATE-SDU *FATE-SSD

PUNCH *FATE-PBB *FATE-PSD

Cartridge *FATE-DCD *FATE-CS

Die w/C *FATE-DSU ATE-D-S-0


4½”Sta. E Double

Row

SET *FATE-SDU *FATE-SDD

PUNCH *FATE-PBB *FATE-PDD

Cartridge *FATE-DCD *FATE-CS

Die w/C *FATE-DDU ATE-D-r


FORM UP Keyed 0 & 180°

FORM UP Keyed 4plc.

CHARACTER MARKING TOOLS

Accessories: Plunger Screws *ACHLOCKB Cartridge Lock

Small *AchlockA Large *AchlockB

Ball Plunger *ASSPLG

FORM DOWN Rotate Cartridge for 4 way positioning

Dwg:Holder-F/ATBFP L10-13

FORM DOWN Rotate Cartridge for Extra Keying

Dwg:Holder-F/ATBFP L6-7

Dwg:Holder-F/ATCPCSB L8-13

Dwg:Holder-F/ATCFULSD L8-10

& 15-18 P.QS L11-13

Die-Shell *AATCDCHSH Die Shell–Stripper *AATCDCHSHS

DEDICATED MARKING UNITS Produced to stamp Logo’s, Names, Part No., etc.. Contact our tooling engineers to discuss your particular application. Camera Ready Art

Work or Cad-.DXF/.IGES files are required for Logo’s. Dedicated form tools can be produced to stamp Logo’s, Names, Part No., etc..

SHARP FACE CHARACTER STAMP INSERT HOLDERS Available 1/16, 3/32, 1/8, & 3/16 width X ¼ height. 1/8 is standard blanks/spacers cost = 50% to

regular character price 1/8 *ACHAR⅛ stamps .09X.15 1/16 *ACHAR1/16 stamps .06X.12” • 5/32 *ACHAR5/32 stamps .125”X.19”, 3/16 *ACHAR3/16 stamps.156X.23 Spacer Kit I*ASPACER includes widths of: 4 each 1/16, 3/32,⅛, 2 pcs 3/16

Lengths: CE & Amada Standard Character Length=.875” WT=.750” (WT old style length=.572” Insert) Note: Units to hold other than .875” character lengths, example .75” or .572” have a $45-$95 adder.

FORM DOWN Keyed 4 plc.


COLE ENGINEERED If facilities aren’t available to properly care for your tooling, CE offers it’s

customers a tool sharpening service at low rates and 1-2 day turn around

FORM TOOL MAINTENANCE Assure best performance. Return to CE for Refurbishment sharpen, re-set, and test. We can usually turn

around a Form Tool in two to three work days. We have a minimal charge to cover labor. Our goal of this service is to assure long term satisfaction with C.E. Tooling products.

ENSURE YOUR TOOLS ARE SHARPENED PROPERLY

Have CE remove old Ejector, and add new, Add below cost per ejector hole. 2mm/.078” or 3mm/.109” holes +$2.50 6mm/.236” or 1/4=.25” + $3.5 10mm/.394” or 15mm/.590” + $4.00

Spherical

Add $5.00 To Punch

Spherical

*ASPS Roof Top

*ARTS

Inverted

*AIS

Concave

*ACS

Double Inverted

*ADIS

Whisper (1-Way)

*AWS

DIE SHARPENING COSTS Qty 1-3

Qty 4-10

Qty 11-25

O.D. UP TO 2-1/4” DIAMETER O.D. OVER 2-1/4 TO 6-1/2” O.D. > 6” - 11” Diameter

PUNCH Sharpening Cost FLAT (NO SHEAR)

Qty 1-3

Qty 4-10

Qty 11-25

Max. diagonal Up to2-/4” TIP DIAGONAL 2-1/4 TO 5” TIP DIAGONAL 5” TO 8”

SPECIAL SHAPED TOOLS SHIP IN 1-5 WORK DAYS Standard Delivery is 3-5 work days. Expedite Guarantee 3 days, +10%, 2 days +30%, 1 day, +50%

NOTE: Ar, Br, Cr, means a radius value is requested. Further, a .015” Radius is always recommended on corners less than 90 degrees.

ADIA.

SP-1 SINGLE "D" SP-2STD SHAPE PRICE

SP-3 HEXAGON

A

STD SHAPEPRICE

SP-7 SP-8

SP-9 SP-10

SP-4

SP-16SP-15SP-14SP-13

KEYWAY (1)

KEYWAY (2) KEYHOLE (1) KEYHOLE (2) KEYHOLE (4)

ADIA. A

A

DIA.

DIA.

C

BC

CB

CB

OCTAGON SP-5 SP-6

SP-12SP-11 SP-17

SP-18

KEYWAY (4)

TEARDROP

A

A

r1r2

A

Br1

r22X

2X

B

A

r1

r2

r3

r4

D

Cr

E Ar

B

SP-19 SP-25SP-20 SP-21

SP-27

SP-26

C

Ar

B

C

B

Ar

ADIA.

B

C

A

B

A

B

Dr

AG

B

D

FrErC CC

SP-31

SP-37 SP-38 SP-39 SP-40


SP-22 SP-23 SP-24

SP-30SP-29 SP-35

SP-36 SP-41 SP-42


SP-44SP-43

A

B

C

A

BC

A

B

D

C

A

B

DC

A B

D

C

B

A

C

D

A B

B

AC

r1r2

A

C

TO APEX

TO APEX

B

RECOMMEND.015 RAD ON ALLCORNERS

C

Ar

Br

Ar

Br

C

C

B

r

ADIA.

A DIA.

B

C

C

A

B

D

A

CB

D

A

B C

D

Er

FrEr

Er

A

B

D

A

B

DB TYP

A TYPC

C

45DEG

A

C

r

A

B

C

D

r

A

BC

D

r1

r2

A

C

B

D

A

B

C

AB

C

D E F

A

Br1r2

A

B

Cr

A

B

C

D

r WEB THICKNESS

RADIUS6 BLEEDOPTIONAL

ABr1

r2

AB

D

C

r1r2

B

A

C

SP-50 SP-51 SP-53 SP-54SP-49

B

A

90 B

A

90

B r1

AR1

R2

R3

60

45

75

NOTE:

For use in Auto Index.

A B

30, 60, 90 Degree STD SHAPEPRICE

A A

A A A A

A A A A A A A A

B B

B B B B C C C B C

C B B

B

DCBBBBB B B

B D D BB B B

B D

C

C

For use in Auto Index.

SP-8 KEYWAY (1)

ADIA.

C

B B

B

CL CL

B

Bow Tie


COLE ENGINEERED

CE Tooling LOUVER TOOLS FOR BRAKE PRESS Single, Double Triple, .. .

EUROPEAN Adapters for AMERICAN

STYLE TOOLS 1/4-20 x 1-1/2SHCS

1/4-20 SHCS

4.0REF1.4173

WILLA or

TRUMP UPPER

EUROPEAN Upper

1/4-20 x 1-1/2SHCS

1/4-20 X 1SHCS

AMERICAN

UPPER

"A"

"B"

"C" HEIGHTLENGTH

WIDTH

(6.35mm MAX)

"A"

"E"

"C"

"D""B"

Stocked Sizes American Style FORM DOWN

A=Length 2” 3” 4” 5” 6” 8” B=Width 1/2” 5/8” 3/4” C=Height 3/16 1/4” 5/16

D=Spacing 3/4” 7/8 E=Base 2-1/2 3-1/2 4-1/2 5-1/2 6-1/2 8-3/4 List Price 1375.00 1391.00 1418.00 1445.00 1552.00 1793.00

1-1/8

Additional In Row


COLE ENGINEERED

COLE ENGINEERED

In our ever increasing goal of providing tools and parts for all your fabricating needs, CE Tooling is happy to announce that we can now provide you with perishables for

your LASER Cutting Machine! Call , Fax or E-Mail us today for a quote on the parts you require. Just provide us with your machine make, model & serial number.

MAKE 2006 YOUR YEAR TO SAVE $$$ & INCREASE PROFITS WITH CE TOOLING!

$AVE ON LASER PERISHABLES

NCT3 Turret Automated Tapping

2"" Sta. C: Smaller threads M1.6-M5 or #2- #12 Tapping Unit Complete with one thread size

Pitch Insert (mated to tap pitch size) Taps: 10pc Pack for most common sizes $113.- $145.

Replacement: Soft Nose Piece, Prolong Grease, Prolong Oil, PT-Vanishing Oil 1ga., 5 gal, PT-Extreme Oil 1 gal., 5

gal, 1Quart Sprayer, Storage Case, Pitch Puller & Retaining Ring Pack for Pitch Inserts can be purchased separately.

3-1/2" Sta. D: Larger threads M6-M8 or #12-5/16 Tapping Unit Complete with one thread size

Pitch Insert (mated to tap pitch size. Taps: 10pc Pack for most common sizes $146. - $300.

Replacement Soft Nose Piece, Prolong Grease, Prolong Oil, PT-Vanishing Oil 1 gal, 5 gal, PT-Extreme Oil 1 gal, 5 gal, 1 Quart Sprayer, Storage Case, Pitch Puller & Retain-ing Ring Pack for Pitch Inserts can be purchased separtely.

Reduce your cost per hole to below $.01 each Tap up to 180 holes a minute. (Depending on ram speed) Pitch insert change in minutes. Roll form taps. No minimum distance between tapped holes Pre-Pierce Hole is required prior to tapping. Tapping tool and Oil Tank is loaded into turret. The “ready punch height will need to be cali-brated prior to tapping and the clamp safety zone will need to be set. Oil Housing rests on the backside of the turret and is held in place by two magnets. The tapping unit and oil housing are connected together by supplied hoses. (With Finnpower machines, the tank surrounds the B sta. Yet still allows the station to be used. Max. Material Thickness is determined by Pitch. Speed is up to 200 SPM on 1” Centers. Tapping Tool consists of Tapping Motor, Oil Tank (mounts outside station on turret), Die Anvil, Lubrication Kit for Maintenance, & (1) Pitch Insert (interchangeable)


COLE ENGINEERED

Die-Set, Brake Press, Iron Worker, Shears, C-Frame, Tube&Pipe Specializing in tooling and machine parts for:

Amada, Behrens, Boschert, Chassis Maker, Di-Acro®, Ehrt, Euromach, Finnpower, Haco, Murata Wiedemann,

Nisshinbo, Omes, Pullmax, Rainer, Roper Whitney, Salvagnini, Simasv, Strippit®, Trumpf, Raskin, W.A. Whitney

and similar presses

LOCAL SALES REPRESENTATIVE DISTRIBUTORS

[email protected] www.cetooling.com Tel. 702 736-2598 Fax 702 736-3038

CE TOOLING, INC. 2560 W. Brooks Ave.

N. Las Vegas NV 89032

BRAKE

Date post:	15-May-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Nisshinbo • Behrens • EuroMach THICK TURRETClearance Chart Sec-1 Keying - Standard Locations 2...

Documents