+ All Categories
Home > Documents > NM 6 - tornos.com · NM 6 Flexi. ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12...

NM 6 - tornos.com · NM 6 Flexi. ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12...

Date post: 16-Mar-2020
Category:

Documents
Upload: others
View: 0 times
Download: 0 times
Download Report this document
Share this document with a friend
4
A A 15 Ø3 Ø0,8 2x 5 M x0.5 6 Ø 3,6 www.escomatic.ch escomatic 3,6 PCS/MIN. (303) THE NEW GENERATION NM 6 Flexi
Transcript
Page 1: NM 6 - tornos.com · NM 6 Flexi. ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12 The material is supplied into the machine from coil. A coil, depending on the type

A

A

15

Ø3

Ø0,82x5M

x0.5

6Ø

3,6

ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12 Fax +41 32 858 12 05 [email protected] www.escomatic.ch

w w w. e s c o m a t i c . c h

e s c o m a t i c

3,6 PCS/MIN. (303)

THE NEW GENERATION

NM 6 Flexi

Page 2: NM 6 - tornos.com · NM 6 Flexi. ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12 The material is supplied into the machine from coil. A coil, depending on the type

ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12

The material is supplied into the machine from coil. A coil, depending on the type of material, usually has 30 to 60 kg and is unrolled from a reel independent of the machine. The material is pulled across the machine by the material feed system. The machine could be equipped with a bar loader replacing the straightening unit as well as the reel and its support.

The material is fed and moved in the machine by the CNC controlled Z1-axis and the attached feed system.

MATERIAL FEED

MATERIAL FEEDING

e s c oma t i c NM 6 FlexiM O R E FLEX I B LE, M O R E VERSAT I LE, FASTER M O R E FLEX I B LE, M O R E VERSAT I LE, FASTER M O R E FLEX I B LE, M O R E VERSAT I LE, FASTER

The material is fed into the machine from coil which becomes «bar stock» after the rotating straightening pro-cess. In the process the material is straightened during the recoil of the rotor of the straightening unit. It produces a bar with a straightness quality equivalent to standard bar stock. Thanks to the electric drive and the programming from the console, the quality of straightening is optimized.Improved speed control and a better managed displace-ment provide a very fine precision of straightening.

MATERIAL STRAIGHTENING

Page 3: NM 6 - tornos.com · NM 6 Flexi. ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12 The material is supplied into the machine from coil. A coil, depending on the type

ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12 Fax +41 32 858 12 05 [email protected] www.escomatic.ch

The front machining unit (DUF) is positioned on a cross table controlled by two axes. The front machining is therefore totally independent of the back machining unit which provides them with freedom of move-ment. Equipped with 3 axial spindles, the front machining unit can perform drilling as well as internal and external threading. A fourth transversal spindle (optional) allows side holes or millings.

Positioned on a table with three axes, the counter spindle can work in horizontal and ver-tical planes, thus allowing the use of many tools and facilitating movements. The counter spindle is equipped with a C axis. Used in spindle mode, the maximal rotating speed is 10’000 RPM. Thanks to the flexibility of the Y axis, up to six working positions (4 axial and 2 vertical) can be utilized. In addition to the spindles, it is also possible to install up to 4 cutting tool holders.

FRONT MACHINING UNIT

TURNING

COUNTER COLLET & BACK MACHINING UNIT

e s c o m a t i c . c he s c oma t i c by ESCO SA

The material is fed through a guide bush into the rotating tool head. The turning and cutting is based on the unique escomatic principle in which four turning tools are

rotating around the workpiece with up to 10’000 RPM (or 12’000 RPM optional). The cut-ting tools are either escomatic tools or inserts from other suppliers.

Page 4: NM 6 - tornos.com · NM 6 Flexi. ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12 The material is supplied into the machine from coil. A coil, depending on the type

e s c oma t i c NM 6 FlexiM O R E FLEX I B LE, M O R E VERSAT I LE, FASTERM O R E FLEX I B LE, M O R E VERSAT I LE, FASTER

TECHNICAL DATA Turning:Max. material diameterWork piece length standardNumber of toolsMax. toolhead speed

Front machining unit (DUF):Number of powered tools axialMax. drilling diameter Max. tapping capacityMax. drilling speedNumber of powered tools lateral (option)Max. drilling/milling speed

Back machining unit (DUA):Max. speed of counter spindleNumber of fixed tools axialMax. drilling diameter Max. tapping capacityNumber of powered tools axial Number of powered tools lateralMax. drilling speedMax. drilling diameter Max. tapping capacity

C-Axis:Resolution/Increment

Numerical control:CNC control FANUC Max. number of controlled axes Number of spindles Measuring system resolution Rapid feed

Technical features:Coolant/cutting fluidTank capacity Flow rate of the pumpMax. system pressureChips container capacityInstalled powerCompressed air consumtionCompressed air pressure

Dimensions:Length x Width x HightL x W x H with coil reelNet weightGross weigthAverage sound pressure levelAverage sound power level

Modifications reserved

6.50150410’000 (12’000 option)

36M412’00014’000

10’00046M44215’0005M3

0.001

Oi-TF730.00140

Oil130308708115

2’270 x 1’600 x 1’7003’600 x 1’650 x 1’7001’6001’80069.887.3

mmmm

min-1

mm

min-1

min-1

min-1

mm

min-1

mm

°

mmm/min

Literl/minbarLiterkVAm3/hbar

mmmmkgkgdBdB

ESCO SA CH 2206 Les Geneveys-sur-Coffrane Tél. +41 32 858 12 12 Fax +41 32 858 12 05 [email protected] www.escomatic.ch

THE NEW

Thanks to the new design and to the use of two completely inde-pendent cross tables for the front and back machining units, the NM6 Flexi breaks the limits of flexibility and performance. Two parts can be manufactured at the same time: one part machined in the turning and front machining unit while the second part positioned in the counter spindle is undergoing back and side operations.

Technical specifications • The escomatic technology with 4 turning tools on the rotating

tool head• Choice of escomatic cutting tools or inserts from other suppliers• High speed manufacturing thanks to the independent front and

rear machining units permitting to work on 2 parts simultane-ously

• Flexibility of the straightening thanks to its’ electric drive and programming from the console

• Improved quality of straightening by control over the rotating and traversing speed

• Easy access for the operator granted by the complete opening of the frontal guarding

• Easy programming by using the latest technologies of the Fanuc 0i-TF control

Very high profitability thanks to:• Unrivaled productivity of the escomatic principle • Very short turning times thanks to the proximity of tools• 24 hours production facilitated by coil feeding• No lost time due to bar loading • Man-hour gain in material feeding• Limited waist of material ends

More flexible, more versatile, faster

The escomatic principle

Unlike conventional lathes, escomatic lathes are based on a unique concept. The material, which is coil stock or bar, does not rotate. The cutting tools mounted onto the spinning tool head rotate around the material. This concept equally qualified for the manufacturing of small, medium and large lot size parts, contributes to the extremely high performance and cost savings achieved with escomatic machines.


Recommended
Gate - images.landsofamerica.com"nm nmnm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm Þ B u l l T o n g u e C r e k West E n d S l o u g h B a ti s e C r e ek T-3 94 Ac

Gate - images.landsofamerica.com"nm nmnm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm Þ B u l l T o n g u e C r e k West E n d S l o u g h B a ti s e C r e ek T-3 94 Ac

Documents

Reactants: 6 CO 12 H Products: 1 m 10 nm 10 nm 1 nm 10 nm ... › faculty › hoffman › common... · 10–5 nm 10–3 nm 1 nm 103 nm 106 nm (109 nm) 380 450 500 550 600 650 700

Reactants: 6 CO 12 H Products: 1 m 10 nm 10 nm 1 nm 10 nm ... › faculty › hoffman › common... · 10–5 nm 10–3 nm 1 nm 103 nm 106 nm (109 nm) 380 450 500 550 600 650 700

Documents

Device Parameters of Heliotron J Coil System L=1/M=4 helical coil 0.96MAT Toroidal coil A0.6MAT Toroidal coil B 0.218MAT Main vertical coil 0.84MAT Inner.

Device Parameters of Heliotron J Coil System L=1/M=4 helical coil 0.96MAT Toroidal coil A0.6MAT Toroidal coil B 0.218MAT Main vertical coil 0.84MAT Inner.

Documents

Fixtured Tool Suspension - FTS Brochure...Demag KBK II 500 Nm 1000 Nm 500 Nm 1000 Nm 1000 Nm 1500 Nm 1000 Nm 1500 Nm Duren DR I 270 Nm 500 Nm 270 Nm - 600 Nm 1500 Nm 900 Nm 1500 Nm

Fixtured Tool Suspension - FTS Brochure...Demag KBK II 500 Nm 1000 Nm 500 Nm 1000 Nm 1000 Nm 1500 Nm 1000 Nm 1500 Nm Duren DR I 270 Nm 500 Nm 270 Nm - 600 Nm 1500 Nm 900 Nm 1500 Nm

Documents

Recreational Craft COVERS Layout 1 of Practice - Appendices_0.pdfMasthead 6 nm 5 nm* 2 nm Sidelight 3 nm 2 nm 1 nm Stern light 3 nm 2 nm 2 nm Towing light 3 nm 2 nm 2 nm All round

Recreational Craft COVERS Layout 1 of Practice - Appendices_0.pdfMasthead 6 nm 5 nm* 2 nm Sidelight 3 nm 2 nm 1 nm Stern light 3 nm 2 nm 2 nm Towing light 3 nm 2 nm 2 nm All round

Documents

Utica H2O Full Line...H2O BT =Buffer Tank 114=1-1/4” NPT 2 • • • • = SINGLE COIL DUAL COIL SINGLE COIL Coil Coil Coil ...

Utica H2O Full Line...H2O BT =Buffer Tank 114=1-1/4” NPT 2 • • • • = SINGLE COIL DUAL COIL SINGLE COIL Coil Coil Coil ...

Documents

Amplification by - gazigoz.org · Ankara, Mart 2010 400 nm Excimer 193 nm 700 nm 100 nm Argon 488-514 nm Diode lazer 810 nm Nd:YAG 1064 nm(NIR) CO2 10.600 nm (FIR)

Amplification by - gazigoz.org · Ankara, Mart 2010 400 nm Excimer 193 nm 700 nm 100 nm Argon 488-514 nm Diode lazer 810 nm Nd:YAG 1064 nm(NIR) CO2 10.600 nm (FIR)

Documents

Oregon Institute of Technology L ß ns 97 Hi UPPER · ns nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm!r!O B-27 B-26 B-25 B-24 B-23 B-18 B-17 B-16 B-15 B-14

Oregon Institute of Technology L ß ns 97 Hi UPPER · ns nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm!r!O B-27 B-26 B-25 B-24 B-23 B-18 B-17 B-16 B-15 B-14

Documents

June 2018 COIL Handling & Processing Equipmentmecon.com/wp-content/uploads/Coil Handling June 2018.pdf · STEEL COIL WEIGHT CALCULATOR coil weight LBS / INCH INSIDE DIAMETER OF COIL

June 2018 COIL Handling & Processing Equipmentmecon.com/wp-content/uploads/Coil Handling June 2018.pdf · STEEL COIL WEIGHT CALCULATOR coil weight LBS / INCH INSIDE DIAMETER OF COIL

Documents

Part number: 044991 Dacia Sandero (HB)M6 M8 M10 M12 M12x100/110 M14 M16 M10x1,25 M12x1,25 M12x1,5 9,5 Nm 23 Nm 46 Nm 79 Nm 125 Nm 195 Nm 49 Nm 87 Nm 83 Nm 14 Nm 34 Nm 68 Nm 117 Nm

Part number: 044991 Dacia Sandero (HB)M6 M8 M10 M12 M12x100/110 M14 M16 M10x1,25 M12x1,25 M12x1,5 9,5 Nm 23 Nm 46 Nm 79 Nm 125 Nm 195 Nm 49 Nm 87 Nm 83 Nm 14 Nm 34 Nm 68 Nm 117 Nm

Documents

3403000 3403500 3404000 3404500 3405000 3405500 0 5 · 2017. 10. 17. · nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nmnm nm nm nmnm nmnm nm nm nm nm nm nm nmnm

3403000 3403500 3404000 3404500 3405000 3405500 0 5 · 2017. 10. 17. · nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nmnm nm nm nmnm nmnm nm nm nm nm nm nm nmnm

Documents

DOUGLAS COUNTY SCHOOL BOARD DISTRICTS - dcssga.org · nm nm nm nm nm nm nmnm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nmnm nm

DOUGLAS COUNTY SCHOOL BOARD DISTRICTS - dcssga.org · nm nm nm nm nm nm nmnm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nmnm nm

Documents

Agilent Infinity II3 1 1. 600 nm, 500 nm 310 nm 2. 3. 3. 4 A 600 nm 100 mAU B 310 nm 100 mAU 4. 600 nm 500 nm 600 nm 310 nm 500 nm 600 nm 310 nm sudan orange G patent blue VF sodium

Agilent Infinity II3 1 1. 600 nm, 500 nm 310 nm 2. 3. 3. 4 A 600 nm 100 mAU B 310 nm 100 mAU 4. 600 nm 500 nm 600 nm 310 nm 500 nm 600 nm 310 nm sudan orange G patent blue VF sodium

Documents

11°30'0W 11°0'0W K en m aD is tr c M p 3 5 . 7 kk Th is m ... · nm nm nm nm nm nm nm nm nm nm nm nm nm nm nmnm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm

11°30'0W 11°0'0W K en m aD is tr c M p 3 5 . 7 kk Th is m ... · nm nm nm nm nm nm nm nm nm nm nm nm nm nm nmnm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm nm

Documents

Farnell | Electronic Component Distributors · 2017. 7. 19. · SEŒECÏ TM VOICE Voice Voice Voice Voice COIL coil coil coil coil Model #55-1870 INS: Dimensions Impedance Input Free

Farnell | Electronic Component Distributors · 2017. 7. 19. · SEŒECÏ TM VOICE Voice Voice Voice Voice COIL coil coil coil coil Model #55-1870 INS: Dimensions Impedance Input Free

Documents

NM Immunization Coalition...NM CYFD NM Department of Health NM Immunization Advisory Group NM Influenza Vaccine Consortium NM Human Services Department NM Hospital and Health Systems

NM Immunization Coalition...NM CYFD NM Department of Health NM Immunization Advisory Group NM Influenza Vaccine Consortium NM Human Services Department NM Hospital and Health Systems

Documents

Reflectance Spectroscopy Lab. Different colors correspond to different wavelengths of visible light 665 nm 630 nm 600 nm 550 nm 470 nm 425 nm 400 nm.

Reflectance Spectroscopy Lab. Different colors correspond to different wavelengths of visible light 665 nm 630 nm 600 nm 550 nm 470 nm 425 nm 400 nm.

Documents

Lake County, Indiana and Cook County, Illinoisnm nm nm nm nm nm nm nmnm nm nm nm nm nm nm nm nm nm # # # # # # # # # # I l l i n o i s n d i a n a a a, n o o, s Grand Calumet Area

Lake County, Indiana and Cook County, Illinoisnm nm nm nm nm nm nm nmnm nm nm nm nm nm nm nm nm nm # # # # # # # # # # I l l i n o i s n d i a n a a a, n o o, s Grand Calumet Area

Documents