NN10300036UA08.1_V1_Alcatel-Lucent 9353 Wireless Management System - Workstation Client Application...

Title page

Alcatel-Lucent 9353

Wireless Management System | UA08.1

Workstation Client / Application Installation

NN-10300-036

Issue 12.13 | August 2013

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements


Legal notice

Legal notice

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective

owners.

The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.

Copyright © 2013 Alcatel-Lucent. All rights reserved.

Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside

Alcatel-Lucent without its written authorization.

Not to be used or disclosed except in accordance with applicable agreements.

Trademarks

Sun, Sun Microsystems, the Sun Logo, Solaris, and JRE are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other

countries.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Mozilla Firefox is a registered trademark of the Mozilla Foundation.

Netscape is a registered trademark of Netscape Communications Corporation in the U.S. and other countries.




Contents

About this document

Purpose ............................................................................................................................................................................................ viivii

Reason for reissue ....................................................................................................................................................................... viivii

New in this release .................................................................................................................................................................... viiiviii

Intended audience ...................................................................................................................................................................... viiiviii

Supported systems ........................................................................................................................................................................ ixix

How to use this document ......................................................................................................................................................... ixix

Prerequisites ................................................................................................................................................................................... ixix

Conventions used .......................................................................................................................................................................... ixix

Related information ....................................................................................................................................................................... xx

Document support .......................................................................................................................................................................... xx

Technical support ........................................................................................................................................................................... xx

How to order .................................................................................................................................................................................... xx

How to comment ........................................................................................................................................................................... xixi

1 Roadmap to Software Management documentation

Overview ...................................................................................................................................................................................... 1-11-1

Roadmap to Software Management documentation .................................................................................................... 1-21-2

2 System requirements

Overview ...................................................................................................................................................................................... 2-12-1

Network management system requirements ................................................................................................................... 2-22-2

Hardware and operating system .......................................................................................................................................... 2-32-3

Browsers and network access ............................................................................................................................................... 2-42-4

Software acquisition ................................................................................................................................................................ 2-52-5

....................................................................................................................................................................................................................................

Alcatel-Lucent 9353 WMS

NN-10300-036 UA08.1

Issue 12.13 August 2013



iii

3 PC installation

Overview ...................................................................................................................................................................................... 3-13-1

Installing JRE and JNLP for NSP ....................................................................................................................................... 3-23-2

Configuring the SRM .............................................................................................................................................................. 3-63-6

Installing the SunMC console ............................................................................................................................................ 3-103-10

Managing Java cache size for multiple JRE installations ........................................................................................ 3-153-15

Installing JRE with static configuration ......................................................................................................................... 3-173-17

Configuring Java control panel for CRL-based certificate revocation ............................................................... 3-203-20

4 Troubleshooting the SunMC installation

Overview ...................................................................................................................................................................................... 4-14-1

Checking the network management system configuration ........................................................................................ 4-24-2

Configuring the SunMC client to use Firefox for help ............................................................................................... 4-44-4

Configuring the SunMC client to use Java console for help ..................................................................................... 4-64-6

Configuring the SunMC client to be launched with the SMC icon from the WMS GUI ............................... 4-74-7

5 Cygwin configuration

Overview ...................................................................................................................................................................................... 5-15-1

Installing Cygwin/X ................................................................................................................................................................. 5-25-2

Configuring Cygwin/X software ......................................................................................................................................... 5-95-9

Index

Contents

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

iv Alcatel-Lucent – Proprietary



NN-10300-036 UA08.1


List of figures

1-1 Roadmap to Software Management documentation ..................................................................................... 1-21-2

3-1 Java Control Panel - Advanced Tab window ................................................................................................... 3-73-7

3-2 Java Control Panel - General Tab window ....................................................................................................... 3-83-8

3-3 Sun Management Center Install Wizard ......................................................................................................... 3-123-12

3-4 Disk space - 1000 MB ........................................................................................................................................... 3-163-16

3-5 Static installation from windows command line ......................................................................................... 3-183-18

3-6 Java setup ................................................................................................................................................................... 3-193-19

3-7 CRL-based certificate revocation ...................................................................................................................... 3-213-21

5-1 Cygwin setup - choose installation type ............................................................................................................ 5-35-3

5-2 Cygwin Setup - Select Local Package Directory ........................................................................................... 5-45-4

5-3 Setup Alert .................................................................................................................................................................... 5-65-6

5-4 Cygwin Setup - Select Packages .......................................................................................................................... 5-75-7

5-5 Cygwin Bash Shell console ................................................................................................................................... 5-95-9

5-6 Cygwin Bash Shell console - command ......................................................................................................... 5-105-10

5-7 XWin Server console ............................................................................................................................................. 5-115-11

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




v

List of figures

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

vi Alcatel-Lucent – Proprietary



NN-10300-036 UA08.1


About this documentAbout this document

Purpose

The purpose of this document is to provide information on how to install and configure

the Wireless Management System (WMS) client software on a Personal Computer (PC).

Reason for reissue

The reissue reasons are:

Issue number Issue date Reason for reissue

12.13 August 2013 Standard issue

12.12 July 2013 Standard issue

12.11 January 2013 Standard issue

12.10 November 2012 Standard issue

12.09 October 2012 Standard issue

12.08 August 2012 Preliminary issue

12.07 May 2012 Preliminary issue

12.06 March 2012 Preliminary issue

12.05 January 2012 Preliminary issue

12.04 November 2011 Preliminary issue

12.03 September 2011 Preliminary issue

12.02 June 2011 Draft issue

12.01 April 2011 Draft issue

...................................................................................................................................................................................................................................


NN-10300-036 UA08.1




vii

New in this release

New features:

• Feature 118402, WMS Software Upgrade Path to OAM08.1, see “Browsers and

network access” (p. 2-4)

• Feature 119198, WMS/WPS Clients on Windows 7, see “Hardware and operating

system” (p. 2-3)

Other changes:

• CR 01005407 updated. See “Installing JRE and JNLP for NSP” (p. 3-2).

• Updated roadmap, see Chapter 1, “Roadmap to Software Management

documentation”.

• Removed references to Solaris 10 Update 9 and CR 01023104 updates. See

“Hardware and operating system” (p. 2-3) and “Browsers and network access”

(p. 2-4)

• Added a note for Step 3 in “Installing JRE and JNLP for NSP” (p. 3-2)

• CR 00608260, updated. See Chapter 5, “Cygwin configuration”

• CR 00593826, updated. See “Browsers and network access” (p. 2-4)

• CR 00571950, updated. See “Configuring Java control panel for CRL-based

certificate revocation” (p. 3-20)

• CR 00573841, updated. See “Managing Java cache size for multiple JRE

installations” (p. 3-15)

• CRs 00575722 and 01023104 updated. See “Installing JRE with static configuration”

(p. 3-17).

• Added steps on disabling next-generation Java plug-in. See, “Disabling

next-generation Java plug-in (optional)” (p. 3-4).

• OAM08.1 Software Media Packaging, see “Installing the SunMC console” (p. 3-10).

• KPI OAM08.1, see “Hardware and operating system” (p. 2-3)

• OAM08.1 Third-Party Software List, see “Browsers and network access” (p. 2-4)

• Modified “Installing JRE and JNLP for NSP” (p. 3-2).

• Modified “Browsers and network access” (p. 2-4).

• Removed information related to the following topics:

– UNIX Workstation

– Sun Ultra™ 45

– Exceed

• Updated “Hardware and operating system” (p. 2-3) and “Installing JRE and JNLP for

NSP” (p. 3-2)

Intended audience

The audience for this document is installation personnel.

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

viii Alcatel-Lucent – Proprietary



NN-10300-036 UA08.1


Supported systems

This document applies to Alcatel-Lucent W-CDMA UA08.1 system release.

This document applies to the following systems:

• WMS

• NodeB

How to use this document

Start with the first chapter and work through the manual to the end. Once you have done

this, you will have carried out the installation test completely and in the proper sequence.

Prerequisites

It is recommended that readers become familiar with Alcatel-Lucent W-CDMA System -

Access Network Management Overview, NN-20500-031.

Conventions used

Vocabulary conventions

None

Typographical conventions

The following typographical conventions are used in this document:

Appearance Description

italicized text • File and directory names

• Emphasized information

graphical user interface text Text that is displayed in a graphical user interface or in

a hardware label

variable A value that the user supplies

key name The name of a key on the keyboard

command-syntax Command names that the user types

input text Text that the user types or selects as input to a system

output text Text that a system displays or prints

IP reference, reference number Related document that is referenced in the document

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




ix

Related information

For information on subjects related to the content of this document, refer to the

documents listed in the following table:

Refer to this document At this location For more information on

Alcatel-Lucent W-CDMA

System - Terminology,

NN-20500-002

http://support.alcatel-

lucent.com

List of terms used in

Alcatel-Lucent 9300

W-CDMA documents.

Alcatel-Lucent 9353 Wireless

Management System - User

Guide, NN-20500-032


lucent.com

How to perform Graphical

User Interface (GUI)

commands available in the

WMS system.

Alcatel-Lucent W-CDMA

System - Access Network

Management Overviews,

NN-20500-031


lucent.com

The UMTS Terrestrial Radio

Access Network (UTRAN)

and the Wireless Management

System (WMS).

Alcatel-Lucent 9353 Wireless

Management System -

Security Fundamentals,

NN-10300-031


lucent.com

Security applications, and the

different procedures to

implement, monitor, or

manage these applications.

Document support

For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at

one of the following telephone numbers:

• +1-888-582-3688 (for the United States)

• +1-630-224-2485 (for all other countries)

Technical support

For technical support, contact your local Alcatel-Lucent customer support team. See the

Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact

information.

How to order

To order Alcatel-Lucent documents, contact your local sales representative or use Online

Customer Support (OLCS) (http://support.alcatel-lucent.com)

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

x Alcatel-Lucent – Proprietary



NN-10300-036 UA08.1


http://www.alcatel-lucent.com/support/

http://www.alcatel-lucent.com/support/

How to comment

To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-

lucent.com/comments/) or e-mail your comments to the Comments Hotline

([email protected]).

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




xi

http://infodoc.alcatel-lucent.com/comments/



mailto:[email protected]

mailto:[email protected]

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

xii Alcatel-Lucent – Proprietary



NN-10300-036 UA08.1


1 1Roadmap to Software

Management

documentation

Overview

Purpose

This chapter provides the roadmap for Software Management documentation.

Contents

Roadmap to Software Management documentation 1-2

...................................................................................................................................................................................................................................


NN-10300-036 UA08.1




1-1

Roadmap to Software Management documentation

Overall roadmap

For the roadmap relating to the full documentation collection, see:

• Alcatel-Lucent W-CDMA System - Document Collection Overview, NN-20500-050

For the Access Network Management Overview, see:

• Alcatel-Lucent W-CDMA System - Access Network Management Overview,

NN-20500-031

Figure 1-1 Roadmap to Software Management documentation

Roadmap to Software Management documentation Roadmap to Software Management documentation

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

1-2 Alcatel-Lucent – Proprietary



NN-10300-036 UA08.1


2 2System requirements

Overview

Purpose

The purpose of this chapter is to describe the hardware and software required to install the

network management client software on a PC.

The Alcatel-Lucent installation engineers carry out the initial installation of network

management client software in the customer network. To add or replace client platform,

the user must install or remove the software. This document provides steps to install the

client software.

Important: If the document does not provide solution required to complete the client

software installation, contact the Alcatel-Lucent customer support representative.

Contents

Network management system requirements 2-2

Hardware and operating system 2-3

Browsers and network access 2-4

Software acquisition 2-5

...................................................................................................................................................................................................................................


NN-10300-036 UA08.1




2-1

Network management system requirements

Purpose

The purpose of this section is to provide an overview of the network management system

requirements to install the network management client software.

Overview

The Network Services Platform (NSP) server software is installed on the network

management server.

The Sun Management Center (SunMC) client is associated with the SUN OS (Solaris)

installed on the network management servers. To ensure that the SunMC is the correct

version for the network management server OS, install the SunMC client software. The

SunMC client software is provided with the network management system installation or

in the upgrade DVDs. See “Installing the SunMC console” (p. 3-10) for details.

Ensure that the network management servers are installed and fully operational before

adding new client platforms.

Note: The network management server hardware and software are installed by the

Alcatel-Lucent installation engineers.

System requirements Network management system requirements

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Hardware and operating system

Purpose

The purpose of this section is to provide an overview of the hardware and OS

requirements to install the network management client software.

Hardware

The following is the list of servers and client platform hardware:

• List of servers

– M5000

– SFE4900

– Netra T5440

– SF V890

– SE T5220

– Netra 240

• CPU — the client platform CPU is Intel® Pentium® IV 3 GHz, Core™ 2 Duo or

Quad, or Intel Core™ processor family (Core™ i3, i5, or i7) or higher

• Hard disk — the client platform hard disk capacity is 80 GB or higher

• RAM — the client platform RAM capacity is 2 GB or higher

Note: In case, Windows® 7 or Windows® Vista is the OS, it is recommended to add 1

GB RAM to the above mentioned value.

Operating system

The following is the list of client platform software:

• Windows® XP Professional - Service Pack 3 or greater

• Windows® Vista Professional - Service Pack 1 or greater

• Windows® 7

The minimum memory and processing power for the client platform depends on the

number of software clients and software applications operating on the client platform.

The procedures in this document assume that the client platform is configured with a

supported OS, applicable disk partitions, and network access.

Note: If the specific requirements are not clear, contact the network administrator or

Alcatel-Lucent customer service representative.

System requirements Hardware and operating system

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




2-3

Browsers and network access

Purpose

The purpose of this section is to provide information about the required browsers.

Overview

The following browsers must be installed prior to installing WMS:

• Mozilla Firefox 2.0 to 4.0

• Windows® Internet Explorer 7 to 9

JRE 1.7.0_15 version is supported in UA08.1 while working with v9.1 WMS NSP GUI

simultaneously.

System requirements Browsers and network access

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Software acquisition

Purpose

The purpose of this section is to provide information about the software acquisition.

The following table provides information about the software to be acquired and its

availability.

Software Available at

NSP, JRE, and SunMC • Network management servers

• Alcatel-Lucent-supplied DVDs

• Alcatel-Lucent ESD site

Cygwin (GPL licensed freeware for Windows) http://www.cygwin.com/

Firefox http://releases.firefox.org/pub/firefox.org/

firefox/

WinZip compression/uncompression PC utility http://www.winzip.com

System requirements Software acquisition

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




2-5

System requirements Software acquisition

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


3 3PC installation

Overview

Purpose

The purpose of this chapter is to provide steps to install the client software and configure

the PC to operate as a network management server client.

Prerequisites

Ensure that the following requirements are met prior to the installation:

• The PC meets the requirements identified in Chapter 2, “System requirements”

• The network management server is fully operational

Contents

Installing JRE and JNLP for NSP 3-2

Configuring the SRM 3-6

Installing the SunMC console 3-10

Managing Java cache size for multiple JRE installations 3-15

Installing JRE with static configuration 3-17

Configuring Java control panel for CRL-based certificate revocation 3-20

...................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-1

Installing JRE and JNLP for NSP

Prerequisites

Install the JRE and Java Network Launch Protocol (JNLP) required to use the NSP on the

PC.

Note: If there are multiple versions of JRE software on the PC, install the JRE

versions with the lowest version first. For example, install the JRE ._11 version first

and the JRE ._15 version last. If you install the higher version first, this can lead to

corruption of some of the java files.

Variable definitions

Variable Definition

<server_ip_address> The IP address of the network management

server is added.

<server_name> The host name of the network management

server is added.

<domain_name> The domain name for the Domain Name

System (DNS).

<main_server_name> The host name of the network management

server.

<username> Default: administrator

<password> Default: adminpass

Procedure to install JRE and JNLP for NSP

To install JRE and JNLP for NSP, perform the following steps:

...................................................................................................................................................................................................

1 Edit the network hosts configuration file.

For Browse to...

Windows XP c:\windows\system32\drivers\etc\hosts

Windows Vista c:\windows\system32\drivers\etc\hosts

Windows 7 c:\windows\system32\drivers\etc\hosts

...................................................................................................................................................................................................

2 Open the hosts file using Notepad.

PC installation Installing JRE and JNLP for NSP

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


...................................................................................................................................................................................................

3 As indicated below, add the server name and address of each network management server

in your network, into the hosts file:

<server_ip_address> <server_name>.<domain_name> <server_name>

Example: 135.120.179.209 cassis.ctflab.cit.alcatel.fr cassis

...................................................................................................................................................................................................

4 Start one of the Alcatel-Lucent recommended web browsers.

...................................................................................................................................................................................................

5 In the web browser, type:

http://<main_server_name>:8080/NSP

...................................................................................................................................................................................................

6 To install the Alcatel-Lucent recommended JRE, click Download the windows 32-bit

JRE installer.

Result: A File Download dialog appears.

...................................................................................................................................................................................................

7 In the File Download dialog, click Open.

...................................................................................................................................................................................................

8 Click Typical setup - All recommended features will be installed.

Result: A License Agreement dialog appears.

...................................................................................................................................................................................................

9 Accept the terms of the licence agreement in the License Agreement dialog. Click

Accept.

Result: The Installing dialog is displayed and a progress bar is shown.

...................................................................................................................................................................................................

10 When the Installation Completed dialog is displayed, click Finish.

...................................................................................................................................................................................................

11 Start one of the Alcatel-Lucent recommended web browsers.

...................................................................................................................................................................................................

12 In the web browser, type:

http://<main_server_name>:8080/NSP

...................................................................................................................................................................................................

13 In the NSP Launch window, click Launch.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-3

Result: The Java Web Start dialog appears with a progress bar. When JNLP

installation is complete, a Security Warning dialog appears.

Note: In case, both JRE .5 and .6 are installed on the PC client system, then verify

the Java cache size. To verify the Java cache size, see “Managing Java cache size

for multiple JRE installations” (p. 3-15)

Also, Java JRE ._24 must be installed on PC client with static configuration. To

install a JRE with static configuration, see “Installing JRE with static

configuration” (p. 3-17).

...................................................................................................................................................................................................

14 In the Security Warning dialog, click Yes.

...................................................................................................................................................................................................

15 Enter the Username and Password. Click Login.

Result: A Security warning dialog appears.

...................................................................................................................................................................................................

16 Click Accept.

Result: The JRE and JNLP are installed.

Note: The next-generation Java plug-in installed as part of JRE . or newer versions,

may stop applets. Use “Disabling next-generation Java plug-in (optional)” (p. 3-4) to

disable the plug-in.

Also, the digital security or trusted certificates need to be verified for proper

functioning of the NSP GUI and its critical plug-ins. See “Configuring Java control

panel for CRL-based certificate revocation” (p. 3-20) to enable automatic verification

of the digital certificates.

Disabling next-generation Java plug-in (optional)

This procedure is optional. In case of difficulty in accessing the SRM web page and

installing software, use the following steps to disable the next-generation Java plug-in.

...................................................................................................................................................................................................

1 Click Start > Control Panel > Java.

...................................................................................................................................................................................................

2 Double-click Java.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


E N D O F S T E P S...................................................................................................................................................................................................

Result: The Java Control Panel opens.

...................................................................................................................................................................................................

3 In the Advanced tab, click + to expand the Java Plug-in.

...................................................................................................................................................................................................

4 Uncheck the check box for Enable next-generation Java Plug-in (requires browser

restart).

...................................................................................................................................................................................................

5 Click OK and restart the browser.

Result: The next-generation Java plug-in is disabled.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-5

E N D O F S T E P S...................................................................................................................................................................................................

Configuring the SRM

Prerequisites

The user should configure the PC to use the Software Repository Manager (SRM) web

interface.

Procedure to configure SRM

To configure SRM, perform the following steps:

...................................................................................................................................................................................................

1 Click Start > Settings > Control Panel.

...................................................................................................................................................................................................

2 Double-click the Java plug-in icon.

Result: The Java Control Panel window appears.

...................................................................................................................................................................................................

3 Click the Advanced tab in the Java Control Panel window.

...................................................................................................................................................................................................

4 Click the plus sign (+) on the left of Java console as shown in Figure 3-1, “Java Control

Panel - Advanced Tab window” (p. 3-7).

PC installation Configuring the SRM

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


...................................................................................................................................................................................................

5 Select the Show console option and click Apply.

...................................................................................................................................................................................................

6 Click the General tab as shown in Figure 3-2, “Java Control Panel - General Tab

window” (p. 3-8).

Figure 3-1 Java Control Panel - Advanced Tab window


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-7

...................................................................................................................................................................................................

7 From the Temporary Internet Files panel, click Settings.

Result: The Temporary Files Settings dialog box appears.

...................................................................................................................................................................................................

8 In the Temporary Files Settings dialog box, click Delete Files.

Result: The Delete Temporary Files dialog box appears.

...................................................................................................................................................................................................

9 In the Delete Temporary Files dialog box, select all the indicated file choices and click

OK.

Figure 3-2 Java Control Panel - General Tab window


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


...................................................................................................................................................................................................

10 From the Network Settings panel, click Network Settings.

Result: A Network Settings dialog box appears.

...................................................................................................................................................................................................

11 Select the Direct connection option and click OK.

...................................................................................................................................................................................................

12 In the Java Control Panel, click OK.

...................................................................................................................................................................................................

13 Using a text editor, open the c:\ProgramFiles\Java\jre<JRE_version>\lib\security\java.

policy file.

...................................................................................................................................................................................................

14 At the end of the file, add the following and save the file.

grant codeBase "http://<ServerHostname.domain>:8080/srm/-"

{ permission java.security.AllPermission;

permission java.lang.RuntimePermission "modifyThread";

permission java.lang.RuntimePermission "exitVM";

permission java.util.PropertyPermission "user.home", "read, write";

permission java.util.PropertyPermission "java.home", "read, write";

permission java.net.SocketPermission "<ServerHostName.domain>","accept,

connect, listen, resolve";

permission java.io.FilePermission "<<ALL FILES>>","read, write, delete,

execute";};

...................................................................................................................................................................................................

15 Start one of the web browsers recommended by Alcatel-Lucent.

...................................................................................................................................................................................................

16 In the address bar of the web browser, enter http://<ServerHostName>:8080/srm/

.

...................................................................................................................................................................................................

17 Type the user name and password, and click Login.

• Default user ID: administrator

• Default password: adminpass

Result: A security warning appears.

Note: An internet firewall prevents successful completion of the Java software

download process. If the PC is configured to use an internet firewall, turn off the

firewall temporarily to complete this process.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-9

E N D O F S T E P S...................................................................................................................................................................................................

Installing the SunMC console

Overview

The purpose of this section is to provide steps to install the SunMC console on a PC.

Prerequisites

Obtain the /DELIVERY/OAM/ALL/PE_SMCCONSOLE_PC/V04_00.E00/PE_

SMCCONSOLE_ PC.V04_00.E00.tar.gz file from one of the following locations on the

network management server:

• The Software Repository Services (SRS) server in directory /opt/nortel/data/srs, or

• The DVD labeled WMS08..0_Platform_main_cd01 or

WMS08..0_Platform_patch_cd01.


The following table provides information on the variables and the corresponding

definition.

Variable Definition

<ServerHostname> Network management server host name

<JRE_version> The correct version of JRE for this software

release

<SunMC user name> Default: oamops

<SunMC password> Default: oam_oamops

Procedure to install the SunMC console

To install the SunMC console, perform the following steps:

...................................................................................................................................................................................................

1 Create a folder named SMC_PC in the folder c:\temp on the PC.

...................................................................................................................................................................................................

2 Start an xterm on the network management server containing the Software Repository

Service.

...................................................................................................................................................................................................

3 Create a temporary directory on the SRS server.

Type mkdir /tmp/PE_SMC_PC.

PC installation Installing the SunMC console

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


...................................................................................................................................................................................................

4 Change the current directory to the location of the SunMC console tar file.

Type cd /opt/nortel/data/srs/DELIVERY/OAM/ALL/PE_SMCCONSOLE_PC/

V04_00.E00.

...................................................................................................................................................................................................

5 Perform one of the following steps:

If... Then...

the PE_SMCCONSOLE_PC.V04_00.E00.

tar.gz file is found in this directory

Perform the following steps:

1. Copy the file to the temporary directory on

the SRS server.

Type cp PE_SMCCONSOLE_PC.V04_

00.E00.tar.gz /tmp/PE_SMC_PC.

2. Proceed to step 8 after the file is copied.

the PE_SMCCONSOLE_PC.V04_00.E00.

tar.gz file is not found

proceed to step 6.

...................................................................................................................................................................................................

6 Insert the DVD WMS08..0_Platform_patch_cd01 or

WMS08..0_Platform_patch_cd01 in the CDROM drive of the SRS server.

...................................................................................................................................................................................................

7 Copy the PE_SMCCONSOLE_PC.V04_00.E00.tar.gz file to the temporary directory on

the network management server:

cp /cdrom/<cdromid>/DELIVERY/OAM/ALL/PE_SMCCONSOLE_PC/V04_00.E00/

PE_SMCCONSOLE_PC.V04_00.E00.tar.gz /tmp/PE_SMC_PC

...................................................................................................................................................................................................

8 Change the current directory.

Type cd /tmp/PE_SMC_PC.

...................................................................................................................................................................................................

9 Uncompress the tar file.

Type gunzip PE_SMCCONSOLE_PC.V04_00.E00.tar.gz.

...................................................................................................................................................................................................

10 Untar the tar file.

Type tar xvf PE_SMCCONSOLE_PC.V04_00.E00.tar.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-11

...................................................................................................................................................................................................

11 Start an FTP application on the PC and navigate to the SRS server directory

/tmp/PE_SMC_PC.

...................................................................................................................................................................................................

12 Copy the \tmp\PE_SMC_PC\PE_SMCCONSOLE_PC.zip file to the PC in the

c:\temp\SMC_PC folder.

...................................................................................................................................................................................................

13 Unzip the PE_SMCCONSOLE_PC.zip file, extracting all the files to the c:\temp|SMC_PC

folder.

...................................................................................................................................................................................................

14 Using Windows Explorer, navigate to c:\temp\SMC_PC\disk1\install.

...................................................................................................................................................................................................

15 Double-click install.bat.

Result: The Sun Management Center Install Wizard dialog appears as shown in

Figure 3-3, “Sun Management Center Install Wizard” (p. 3-12).

Figure 3-3 Sun Management Center Install Wizard


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


...................................................................................................................................................................................................

16 Click Next.

...................................................................................................................................................................................................

17 To specify the installation destination directory, type c:\Program Files\SUNWsymon.

...................................................................................................................................................................................................

18 Click Next.

...................................................................................................................................................................................................

19 To the prompt "This directory does not exist. Create it now?", click Create.

...................................................................................................................................................................................................

20 In the Select Add-on Products dialog, select Performance Reporting Manager.

...................................................................................................................................................................................................

21 Click Next.

...................................................................................................................................................................................................

22 In the Confirmation dialog, ensure that the following three products are listed:

• Production Environment

• Advanced System Monitoring

• Performance Reporting Manager

...................................................................................................................................................................................................

23 Click Next.

Result: After the three products are installed, the Installation Complete dialog

appears.

...................................................................................................................................................................................................

24 Click Close.

...................................................................................................................................................................................................

25 Edit the c:\Program Files\SunWsymon\SunMC4.0\console\es_console.bat file and ensure

that the Java version requested on start is <JRE_version>.

...................................................................................................................................................................................................

26 Using Windows Explorer, navigate to c:\Program Files\SunWsymon\SunMC4.0\console

and double-click the es_console.bat file.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-13

Result: The Sun Management Center Logon dialog appears.

...................................................................................................................................................................................................

27 Enter the login credentials:

• Login ID: <SunMC user name>

• Password: <SunMC password>

• Server Host: <ServerHostname>


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


E N D O F S T E P S...................................................................................................................................................................................................

Managing Java cache size for multiple JRE installations

Purpose

This procedure is used when multiple JREs are installed on the same PC client system.

For example, JRE 1.5 and 1.6. This procedure is performed to manage the Java cache

size.

Procedure

To manage the Java cache size, perform the following steps:

...................................................................................................................................................................................................

1 Check the cache setting in JRE 1.5 control panel by executing C:\Program

Files\Java\<jre1.5.0_15>\bin\javacpl.exe

Result: The Java Control Panel is displayed.

...................................................................................................................................................................................................

2 In the General tab, under the Temporary Internet Files pane, click Settings....

Result: The Temporary Files Settings window is displayed.

...................................................................................................................................................................................................

3 Verify that the Location: under Settings is:

C:\Documents and Settings\<user>\Application Data\Sun\Java\Deployment\cache for

Windows XP/2003.

or

C:\Users\<user>\AppData\LocalLow\Sun\Java\Deployment\cache for Windows 7.

...................................................................................................................................................................................................

4 Repeat Steps 1 to 3, to verify the Location: for JRE .6.

Note: Run C:\Program Files\Java\<jre1._24>\bin\javacpl.exe to see the Java

Control Panel for JRE 1.6. Please note that the location of Java cache for JRE 1.6 is

same as that for JRE 1.5 in Windows XP and Windows 7 OS.

...................................................................................................................................................................................................

5 Verify the value for Set the amount of disk space for storing temporary files: under

Disk space is set to 1000 MB for JRE 1.6 as shown in Figure 3-4, “Disk space - 1000

MB” (p. 3-16).

PC installation Managing Java cache size for multiple JRE installations

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-15

...................................................................................................................................................................................................

6 Log in to NSP, NG-SEC, and SunMC GUIs for all 8.1 WMS builds to verify confirmed

login ability. Logout after successful logins.

...................................................................................................................................................................................................

7 Execute C:\Program Files\Java\<jre1.5.0_15>\bin\javaws.exe

Result: The Java Application Cache Viewer window is displayed.

...................................................................................................................................................................................................

8 Delete all the Java cache applications on the PC client for JRE 1.5.

Result: The following message is displayed:

You have successfully completed the Java cache size verification for multiple JRE

installations.

Figure 3-4 Disk space - 1000 MB

PC installation Managing Java cache size for multiple JRE installations

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


E N D O F S T E P S...................................................................................................................................................................................................

Installing JRE with static configuration

Purpose

This procedure should be executed to install Java JRE with static configuration.

Note: It is necessary to install JRE 1.7.0_15 version to be supported in UA08.1 while

working with v9.1 WMS NSP GUI simultaneously.

Overview

JRE can be installed in the following configurations:

• Patch-in-place configuration: The patch-in-place configuration means that when a

given version of the JRE is installed on the PC client, any further updates of the same

JRE type will replace the existing JRE patch.

• Static configuration: The static configuration means that when Java updates are

installed on the PC client, the static configuration-enabled JRE version is no longer

replaced by the new update. The new updates will be installed in a separate directory;

thereby, retaining the specific static configuration-enabled JRE.

Note: The default JRE version will be installed with patch-in-place configuration,

which means the future JRE upgrades or installations will replace this version of the

JRE.

Procedure

To install JRE with static configuration, perform the following steps:

...................................................................................................................................................................................................

1 Download and save the JRE installer from http://<WMS_primary_main_server_hostname

or IP_address>:8080/NSP/ on the desktop. For example, http://uctfee3q.vxlabwcdma.

fr.alcatel-lucent.com:8080/NSP/.

...................................................................................................................................................................................................

2 Click Start > Run and enter cmd.exe in the Run dialog box. Click OK.

Result: The Windows Command Line window is displayed.

...................................................................................................................................................................................................

3 Type cd D:\Documents and Settings\<user>\Desktop\ and press Enter to change the

directory to Desktop as shown in Figure 3-5, “Static installation from windows command

line” (p. 3-18).

PC installation Installing JRE with static configuration

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-17

...................................................................................................................................................................................................

4 Type j2re-windows-i586-p.exe STATIC=1 and press Enter .

Figure 3-5 Static installation from windows command line


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Result: The Java Setup -Welcome window is displayed as shown in Figure 3-6,

“Java setup” (p. 3-19).

...................................................................................................................................................................................................

5 Click Install to proceed with the installation of the JRE static configuration.

Result: The installation of the JRE static configuration is complete.

Figure 3-6 Java setup


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-19

E N D O F S T E P S...................................................................................................................................................................................................

Configuring Java control panel for CRL-based certificate

revocation

Purpose

This procedure is used to configure the Java control panel to enable Certificate

Revocation List (CRL) based revocation of security certificates. This procedure must be

followed to avoid potential Next Generation – Security (NG-SEC) GUI login failures.

Procedure

To enable CRL-based certificate revocation, perform the following steps:

...................................................................................................................................................................................................

1 Click Start > Settings > Control Panel.

...................................................................................................................................................................................................

2 Right-click on the Java Control Panel icon and select Open.

Result: The Java Control Panel is displayed.

...................................................................................................................................................................................................

3 In the Advanced tab, under Settings, double-click Security > General.

...................................................................................................................................................................................................

4 Select the checkbox Check certificates for revocation using Certificate Revocation

Lists (CRLs) as shown in Figure 3-7, “CRL-based certificate revocation” (p. 3-21).

PC installation Configuring Java control panel for CRL-based certificate

revocation

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


...................................................................................................................................................................................................

5 Click OK.

Result: The Java control panel for CRL-based certificate revocation is configured

successfully.

Figure 3-7 CRL-based certificate revocation


revocation

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




3-21

E N D O F S T E P S...................................................................................................................................................................................................


revocation

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


4 4Troubleshooting the

SunMC installation

Overview

Purpose

The purpose of this chapter is to provide troubleshooting procedures for the SunMC client

installation.

Contents

Checking the network management system configuration 4-2

Configuring the SunMC client to use Firefox for help 4-4

Configuring the SunMC client to use Java console for help 4-6

Configuring the SunMC client to be launched with the SMC icon from the

WMS GUI

4-7

...................................................................................................................................................................................................................................


NN-10300-036 UA08.1




4-1

Checking the network management system configuration

When to use

Perform this procedure if the following warning message is displayed on the SunMC

console when you attempt to add a new node to the network:

WARNING

Cannot communicate with agent process. Please check host or agent and retry.


The following table provides information on the variable and the corresponding

definition.

Variable Definition

<server IP address> The IP address of the network management

server is added

<server name> The host name of the network management

server is added

<domain.name> The domain name for the Domain Name

System (DNS)

Procedure

To check the network management system configuration, perform the following steps:

...................................................................................................................................................................................................

1 Open the network hosts configuration file.

For... Browse to...

Windows XP c:\WINNT\system32\drivers\etc\hosts

Windows Vista c:\windows\system32\drivers\etc\hosts

Windows 7 c:\windows\system32\drivers\etc\hosts

...................................................................................................................................................................................................

2 For each network management server in the network, ensure that the following

information exists in the file:

<server IP address> <server name> <server name>.<domain_name>

Troubleshooting the SunMC installation Checking the network management system configuration

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Note: The <server name> can appear either before or after the <server IP

address>.

Example: 135.120.179.209 cassis cassis.ctflab.cit.alcatel.fr

...................................................................................................................................................................................................

3 Log in to the network management server with the user ID as root.

...................................................................................................................................................................................................

4 Open the network configuration file /etc/hosts.

...................................................................................................................................................................................................

5 Ensure that the host name and IP address of the new node are included in this file.

Troubleshooting the SunMC installation Checking the network management system configuration

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




4-3

E N D O F S T E P S...................................................................................................................................................................................................

Configuring the SunMC client to use Firefox for help

When to perform

Perform this procedure if the following warning message is displayed on the SunMC

console when you click Help:

WARNING

Sun Management Center online help requires Firefox. Exception message: firefox:

not found.

Tip: Instead of Firefox, you can use Java console for Help. See, “Configuring the

SunMC client to use Java console for help” (p. 4-6).

Procedure

To configure the SunMC client to use Firefox for help, perform the following steps:

...................................................................................................................................................................................................

1 Click Start > Search > For Files or Folders.

Result: The Search Results dialog is displayed.

...................................................................................................................................................................................................

2 Enter firefox.exe in the search field for local drives.

...................................................................................................................................................................................................

3 Click Search Now.

...................................................................................................................................................................................................

4 When the search results are displayed, record the location of the Firefox executable.

Troubleshooting the SunMC installation Configuring the SunMC client to use Firefox for help

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


...................................................................................................................................................................................................

5 Find the environment settings:

For... Perform the following actions...

Windows XP

Windows Vista

Windows 7

1. Click Start > Settings > Control Panel >

System.

2. Select the Advanced tab.

3. In the Advanced dialog, select

Environment Variables.

4. In the System variables window, examine

the value of the variable Path. Ensure that

the value includes the location of the

Firefox browser executable recorded in

step 4.

5. If the location of the Firefox browser

executable is not included, select the Path

variable and click Edit.

6. Add a colon and the location of the

Firefox browser executable at the end of

the value.

Example: c:\Program Files\Firefox

7. Click OK in the three open Properties

dialogs.

Troubleshooting the SunMC installation Configuring the SunMC client to use Firefox for help

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




4-5

E N D O F S T E P S...................................................................................................................................................................................................

Configuring the SunMC client to use Java console for help

When to perform

Perform this procedure in the following conditions:

• You do not want to use Firefox for Help, and

• The following message is displayed on the SunMC console when you click Help

WARNING

Sun Management Center online help requires Firefox. Exception message:

firefox: not found.

Procedure

To configure the SunMC client to use Java console for help, perform the following steps:

...................................................................................................................................................................................................

1 Click Start > Search > For Files or Folders.

Result: The Search Results dialog is displayed.

...................................................................................................................................................................................................

2 In the search field for local drives, enter javaconsole.properties.

...................................................................................................................................................................................................

3 Click Search Now.

...................................................................................................................................................................................................

4 When the search results are displayed, record the location of the javaconsole.properties

files.

...................................................................................................................................................................................................

5 Edit the javaconsole.properties file with notepad.

...................................................................................................................................................................................................

6 Remove the line SunMC.browser.path=xxxxxxx.

...................................................................................................................................................................................................

7 Save the javaconsole.properties files.

Troubleshooting the SunMC installation Configuring the SunMC client to use Java console for help

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


E N D O F S T E P S...................................................................................................................................................................................................

Configuring the SunMC client to be launched with the SMC

icon from the WMS GUI

When to perform

Perform this procedure, if from the WMS GUI, when you double-click the SMC icon, the

following message appear:

WARNING

"Impossible to launch SunMC JWS", "UnknownHostException"


The following table provides information on the variables and the corresponding

definition.

Variable Definition

<HOST_NAME> Full qualified domain name of primary main

server

Procedure

To configure the SunMC client to be launched with the SMC icon, perform the following

steps:

...................................................................................................................................................................................................

1 Log in as oamops user on the PMS.

...................................................................................................................................................................................................

2 Enter cd /opt/nortel/applications/sysmgt/SunMC/jws/resources/

cp -p SunMC.jnlp SunMC.jnlp.sav.

...................................................................................................................................................................................................

3 Edit the SunMC.jnlp file to replace the <HOST_NAME> string by the full qualified domain

name of the PMS.

Example: Replace the line

codebase="http://<HOST_NAME>:8080/SunMC/"

with the line

codebase="http://cassis.ctflab.cit.alcatel.fr:8080/SunMC/".

Troubleshooting the SunMC installation Configuring the SunMC client to be launched with the SMC


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




4-7

...................................................................................................................................................................................................

4 Save the file and exit.

Troubleshooting the SunMC installation Configuring the SunMC client to be launched with the SMC


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


E N D O F S T E P S...................................................................................................................................................................................................

5 5Cygwin configuration

Overview

Purpose

The purpose of this chapter is to describe the necessary steps required to be performed on

any client that is intended to run WMS X11 windows. For this purpose, a third party X11

software (known as X server) is required to be installed on the client host. The procedure

describes installation of the well-known X servers: Cygwin/X (http://www.cygwin.com).

Any of the above mentioned X server needs to be manually launched prior to the launch

of the NSP client.

Prerequisites

Ensure that Cygwin is installed on the PC.

Note:

• Alcatel-Lucent complies with Cygwin, but does not provide this software

• The WMS supports Cygwin 1.5 or later versions

Contents

Installing Cygwin/X 5-2

Configuring Cygwin/X software 5-9

...................................................................................................................................................................................................................................


NN-10300-036 UA08.1




5-1

Installing Cygwin/X

Purpose

This procedure is performed for installing Cygwin/X. An access to Cygwin repository is

required to install Cygwin/X. This repository is available on the internet on Cygwin

repository sites or it can be placed locally on local host or LAN storage. The Cygwin

setup files are available as freeware on the internet.

Procedure

To install Cygwin/X, perform the following steps:

...................................................................................................................................................................................................

1 Download and run the setup.exe file available on http://www.cygwin.com/ to initiate the

installation.

Result: The Cygwin Setup window is displayed.

Note: To install the application, the user must have administrative rights.

...................................................................................................................................................................................................

2 Click Next.

Cygwin configuration Installing Cygwin/X

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Result: The Cygwin Setup - Choose Installation Type window is displayed as shown

in Figure 5-1, “Cygwin setup - choose installation type” (p. 5-3).

...................................................................................................................................................................................................

3 Select Install from Internet (downloaded files will be kept for future re-use) option,

if no repository on LAN storage or local host is available. Alternatively, select Install

from Local Directory. Click Next.

Result: The Cygwin Setup - Choose Installation Directory window is displayed.

...................................................................................................................................................................................................

4 The default install root directory is %system_disk%:\cygwin. However, any other install

location can also be specified.

Note: Leave the Install For field set to All Users (RECOMMENDED) unless you lack

local administrative privileges.

Click Next.

Figure 5-1 Cygwin setup - choose installation type


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




5-3

Result: The Cygwin Setup - Select Local Package Directory window is displayed as

shown in Figure 5-2, “Cygwin Setup - Select Local Package Directory” (p. 5-4).

...................................................................................................................................................................................................

5 Ensure that the Local Package Directory is the directory from which the setup.exe file is

executed. Click Next.

Figure 5-2 Cygwin Setup - Select Local Package Directory


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Result: The Cygwin Setup - Select Connection Type window is displayed as shown

in “Procedure” (p. 5-5)

...................................................................................................................................................................................................

6 Select the proxy setup. It is recommended to use the option Use Internet Explorer Proxy

Settings. Click Next.

Result: The Cygwin Setup - Choose Download Site(s) window is displayed.

...................................................................................................................................................................................................

7 Select a download mirror from the Available Download Sites list. Click Next. The setup

will download a list of available packages.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




5-5

Note: If this is a first Cygwin installation, a Setup Alert window is displayed as

shown in Figure 5-3, “Setup Alert” (p. 5-6).

...................................................................................................................................................................................................

8 Click OK.

Figure 5-3 Setup Alert


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Result: The Cygwin Setup - Select Packages window is displayed as shown in

Figure 5-4, “Cygwin Setup - Select Packages” (p. 5-7).

...................................................................................................................................................................................................

9 Select the packages to be installed. All X server packages are placed under X11 category.

Note: The required packages are xorg-server, xinit, and xhosts. All other packages are

left as Skip shown by default.

Click Next.

Result: The Cygwin Setup - Resolving Dependencies window is displayed.

...................................................................................................................................................................................................

10 Ensure that the Select required packages (RECOMMENDED) checkbox is selected.

...................................................................................................................................................................................................

11 Click Next to begin the download process.

Note: Another download mirror can be tried if a Connecting message on this screen

appears for a long period of time.

Figure 5-4 Cygwin Setup - Select Packages


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




5-7

After the required packages are downloaded, the setup installs them automatically.

Result: The Cygwin setup window is displayed with the installation progress

followed by the Cygwin Setup - Installation Status and Create Icons window.

...................................................................................................................................................................................................

12 Click Finish to complete the installation process.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


E N D O F S T E P S...................................................................................................................................................................................................

Configuring Cygwin/X software

Purpose

This procedure is performed to configure Cygwin/X software.

Procedure

To configure the Cygwin/X software, perform the following steps:

...................................................................................................................................................................................................

1 Click Start > Programs > Cygwin > Cygwin Terminal.

Result: The Cygwin Bash Shell window is displayed as shown in Figure 5-5,

“Cygwin Bash Shell console” (p. 5-9).

...................................................................................................................................................................................................

2 Execute the following command in the Cygwin Bash Shell console window as shown in

Figure 5-6, “Cygwin Bash Shell console - command” (p. 5-10).

rm -f .startxwinrc ; echo "xhost +" > .startxwinrc

Figure 5-5 Cygwin Bash Shell console

Cygwin configuration Configuring Cygwin/X software

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




5-9

...................................................................................................................................................................................................

3 Close the Cygwin Bash Shell window.

Note: If the NSP client host is being used by several users, it is necessary to perform

these configuration steps for each Windows user working with the NSP client.

...................................................................................................................................................................................................

4 To launch Cygwin, click Start > Programs > Cygwin-X > XWin Server.

Figure 5-6 Cygwin Bash Shell console - command


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Result: The XWin Server console window is displayed as shown in Figure 5-7,

“XWin Server console” (p. 5-11).

Figure 5-7 XWin Server console


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




5-11

E N D O F S T E P S...................................................................................................................................................................................................

Note: For information on launching SSH session for OneBTS, refer to the

Alcatel-Lucent 9353 Wireless Management System User Guide, NN-20500-032.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




NN-10300-036 UA08.1


Index

B browsers and network access, 2-4

................................................................................................

C configuring and launching Cygwin

procedure, 5-9

configuring SRM

prerequisites, 3-6

configuring SunMC client

Firefox for help, 4-4

java console for help, 4-6

launch with icon SMC, 4-7

Cygwin configuration

overview, 5-1

................................................................................................

D documentation roadmap, 1-2

................................................................................................

H hardware and operating system, 2-3

................................................................................................

I installing Cygwin/X

procedure, 5-2

installing JRE and JNLP for NSP

prerequisites, 3-2

installing the SunMC

overview, 3-10

................................................................................................

J JRE installations

installing JRE with Static Configuration, 3-17

managing Java cache size for multiple JRE

installations, 3-15

................................................................................................

N network management, 2-2

................................................................................................

P pc Installation

overview, 3-1

................................................................................................

R roadmap

documentation, 1-2

................................................................................................

S software acquisition, 2-5

................................................................................................

T troubleshooting

SunMC installation, 4-1

....................................................................................................................................................................................................................................


NN-10300-036 UA08.1




IN-1

Index

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

IN-2 Alcatel-Lucent – Proprietary



NN-10300-036 UA08.1


Date post:	19-Jan-2016
Category:	Documents
Upload:	amrit-aulakh
View:	39 times
Download:	0 times