Our completely redesigned Super Saw now has the most features and power available of any undercutting saw. The 13 AMP motor and 61/2" diameter flush-cutting blade can fully un der cut the inside corner even in extremely tight areas. Doors as thick as 13/4" can be undercut without removal. Blade height is adjustable from a flush cut to a maximum of 11/4" off the floor. The vacuum fitting for dust control can save a lot of clean up (vacuum not included). The retractable stabilizer provides a smooth, solid feel under load. Comes with carrying case, carbide blade, masonry blade, and instructions.
No. 812 Super Saw Kit
R.P.M. No. Stan dardOrder No. Description Amps Weight No. Load Teeth Package 812 120V Super Saw Kit 13 14 lbs. 4,800 - - - 1 821 Carbide-Tipped Blade - - - 6 oz. - - - 36 1 822 Diamond Blade - - - 10 oz. - - - 14 1 805 Masonry Blade - - - 6 oz. - - - - - - 1
TILE AND STONE UNDERCUTTING
No. 822 Diamond
For Crain Nos. 812 & 825 saws ONLY!
FULLY UNDERCUTSINSIDE CORNERS
RETRACTABLESTABILIZER
DEPTHGAUGE
BLADEGUARD
DUSTCONTROL
BLADESTOPHEIGHT
ADJUSTER
ERGONOMIC HANDLES
13 AMPSHELICALGEARS
COMES WITH CASE, CARBIDE BLADE, AND MASONRY BLADE
PATENTPENDING
MASONRY CUTTING POCKET DOOR CUTTING
General purpose wood cutting.
No. 821 Carbide No. 805 Masonry
A dry-cut composition blade for masonry.
This versatile saw undercuts along walls, door jambs, under toe spaces, and will also fully undercut inside corners.
The height of cut is easily adjustable from flush to one inch above the floor. The large, flat base prevents tipping and as-sures accurate, level cutting. The dual-angle depth gauge al-lows undercutting at a “straight-on” or a 45° angle. The visual scale provides precision depth control at 1/8" increments.
Each saw comes with a 36-tooth No. 556 Carbide Blade. The blade is bell-shaped for added rigidity and should not be used on any other saw. Also comes with custom molded carrying case and a hex key for blade removal. Detailed instructions and one-year guarantee are included.Order No. Description Volts Amps. Weight 555 Multi-Undercut Saw 120 6.2 11 lbs. 555V 220V Multi-Undercut Saw 220 3.1 11 lbs. 556 Carbide Blade (36 tooth) --- --- 6 oz.
This saw has a larger 6½" diameter blade that can undercut doors in place, and comes with a masonry blade for undercutting hearths. A diamond blade (No. 822) is available for undercutting tile and stone. Other enhanced features include a more powerful, lower RPM motor that throws less dust, dust control port, thread-ed rod height adjustment that will not slip, and rugged aluminum ratchet handle. Undercuts most everywhere including inside corners. Comes with case, blade wrench, and instructions.Order No. Description Volts Amps. Weight 825 Heavy-Duty Undercut Saw 120 8.15 16 lbs. 825V Heavy-Duty Undercut Saw 230 4.1 16 lbs. 821 Carbide-Tipped Blade --- --- 6 oz. 822 Diamond Blade --- --- 10 oz.
Our improved toe-kick saw now comes with a more powerful motor and carrying case at no increase in price! The powerful 21/2 HP 11 AMP motor provides plenty of power. Cuts flush to the wall with a maximum depth of 3/4" for removing the thickest underlayments. Diamond blade accessory is very helpful for tile repair work.Order No. Description Volts Amps. Weight 795 Toe-Kick Saw 120 11 9 lbs. 787 Carbide-Tipped Blade --- --- 2 oz. 788 23/4" Toe-Kick Saw Blade --- --- 2 oz. 789 25/8" Diamond Saw Blade --- --- 2 oz.
No. 555 Multi-Undercut Saw
No. 825 Heavy-Duty Undercut Saw
No. 795 Toe-Kick Saw
No. 795
CARBIDENo. 787
No. 788DIAMONDNo. 789
Cuts 3/4" deep
Cuts 3/8" deep
Cuts 3/8" deep
No. 821
No. 556
No. 555
ToeSpaces
No. 825
TileRepair
UNDERCUTS DOORS IN PLACE AND MASONRY!
UNDERCUTS INSIDE CORNERS AND TOE SPACES!
Swivel-Lock Head
No. 520 Swivel-Lock Stretcher 60º of swivel with 5 lock points!The Swivel-Lock Stretcher gives you the benefits of both straight and swivel heads. The head has 60° of free swivel for patterned carpet. De press the built-in lock pin, and you can lock the swivel in 5 con ve nient positions. Lock in the straight position for square stretch ing, or at 15° for most angle stretch ing. There’s even a 30° setting for extreme angles found in “L” shaped living/dining rooms. Also features a stretch lock button for partial stretches. Pin depth adjust-ment bar allows for variable pin depth penetration for different carpet thicknesses. Ad justs with two screws in the pin plate. Comes with Auto-Lok Tube and Fold-ing Tail Block. Available in double case model only. Order No. Description Weight 520 Swivel-Lock Stretcher 59 lbs. 1520-Z Swivel-Lock Head ONLY 12 lbs.
Nos. 499 and 500 Power Stretch ersOur fixed head stretch er has the features that you would expect in a more ex pen sive power stretcher. Comes com plete with push-button stretch lock, Auto-Lok tube, 3 extension tube sec tions, 1 transfer tube section, folding tail block, and your choice of cases (see next page). Ad justs from 37" to 23 ft. and can be length ened by adding additional ex ten sion tubes (No. 502). The No. 500 has an ad just ing knob on the top of the power unit with a visual depth setting gauge. Just set the dial to the desired pin depth and you’re ready to stretch. No screws or screwdrivers required.Order No. Description Cases Weight 499 Double Case Stretcher 2 59 lbs. 500 Single Case Stretcher 1 53 lbs.
on angle stretches.
pull to shorten
FoldingTail Block Auto-Lok Tube
All Crain stretchers now come with:
No. 499No. 500
No. 520
Head
Depth Bar(Nos. 499 &
on or be carried separately CARRY
ROLL
SPLIT
No. 497
No. 500Single Case
No. 501
No. 1500-23
No. 502
No. 516 - 3'
No. 500Z
No. 520Z
Stretchesoff postsand corners!
No. 517 - 5'
No. 498
No. 499 Double Case StretcherThe new Crain double case design includes a head case with wheels and a tube case that hooks onto the head case for easy transport. The cases are easily split apart for carrying upstairs or loading back into the van. Both cases are durably constructed of double-wall high density blow-molded plastic and feature re-cessed latches and handles that won’t break off. The custom-fit interior holds all the stretcher components shown on the previous page.
Case and components are also sold separately. No. 498E Empty Tube Case holds the Auto-Lok Tube and 3 Ex ten sion Tubes. No. 499E Empty Double Cases hold the Crain Power Stretcher, Auto-Lok Tube, and up to 5 Ex ten sion Tubes. Also hold Roberts #10-239. Order No. Description Weight 499 Double Case Stretcher 59 lbs. 497 Case w/Driving Head, Transfer Tube, & Speed Tail Block 32 lbs. 498 Tube Case w/3 Extension Tubes & Auto-Lok 27 lbs. 498E Empty Tube Case 7 lbs. 499E Empty Double Cases (Head & Tube) 18 lbs.
No. 500 Single Case StretcherThe new Crain single case design now comes with wheels for easy transport. Comes with all the power stretch er components shown for the No. 500 on the pre-vious page. The case is blow-molded from high-density plastic, and fea tures in dus tri al-qual i ty double-wall con-struc tion. Its cus tom interior holds the Driv ing Head, Folding Tail Block, Transfer Tube Section, 3 Ex ten sion Tubes, and one Auto-Lok Tube. The single case design saves you mon ey.
No. 503 Empty Single Case holds the Stretcher com po-nents list ed above, or up to 6 Extension Tubes. (Note: you must have new style narrow lifting handle to hold all of these stretcher components.)Order No. Description Weight 500 Single Case Stretcher 53 lbs. 503 Stretch er Carrying Case 11 lbs. 1500-U Driving Head ONLY 12 lbs.
Stretcher AccessoriesNo. 501 Auto-Lok TubeAdjust your stretcher poles in a flash with our Auto-Lok Tube! Just push back on your tubes to extend, push but tons and pull back to shorten. A proven time saver! Works with other Junior Pow er Stretch ers with stan-dard size poles.Order No. Description Weight 501 Auto-Lok Tube 7 lbs.
Extension Tube SectionsExtra extension tubes give you extra length for big jobs. Available in steel and aluminum models. Order No. Description Weight 502 3' Extension Tube 6.00 lbs. 516 3' Aluminum Stretcher Tube 3.26 lbs. 517 5' Aluminum Stretcher Tube 6.00 lbs.
No. 500Z and 520Z Cotton Grip HeadsRecommended for berbers and low level com mer cial car pets.Order No. Description For Stretcher Weight 500Z Cotton Grip Head 499-500 4 lbs. 520Z Cotton Grip Head 520 4 lbs.
No. 1500-23 Folding Tail BlockThis tail block folds for stretching off outside corners in “L”-shaped rooms and posts. The tube locks for stretching off posts. Spans 20" flat. Also has wheels to move it down the wall fast. Works with all Crain Stretch-ers, and other junior stretchers with standard poles.Order No. Description Weight 1500-23 Folding Tail Block 4.5 lbs.
No. 514 Mini-Stretcher w/ Seam Att.Used for stretching in close quarters, restretching, or in rooms where the tail block can’t be braced against an opposite wall. It pulls with the tail blade off the tack strip. Now comes with seam repair attachment and stretch lock which is also helpful for pattern matching. Comes with plastic carrying case. Order No. Description Weight 514 Mini-Stretcher w/ Seam Att. 22 lbs.
No. 513 Seam Repair AttachmentWhen attached to a Mini Stretcher, it be comes a ver-satile seam repair stretcher for quick carpet re pairs. Fea tures adjustable pin depth and durable con struc-tion. Also may be used in pattern matching.Order No. Description Weight 513 Seam Repair Attachment 4 lbs.
No. 507 Stairway StretcherWorking from the top of the stairway down, it stretch-es the carpet fully–with gravity with you, it’s easier! Gives a tight er uniform stretch, without the usual sore knees. Order No. Description Weight 507 Stairway Stretcher 141/2 lbs.
No. 161 Notched Carpet SpreaderOur notched carpet spreader is made from flexible brushed stainless steel. The blade is flexible enough to be used in tight spaces as a glue spreading trowel tool. The blue plastic handle is ergonomically con-toured. Blade width: 12 inches.Order No. Description Weight 161 Notched Carpet Spread er 8 oz.
No. 162 Plain Carpet SpreaderOur plain carpet spreader is made with thicker 16 gauge plated steel without notches. This creates a better tucking tool that won’t bend under load and easily slides at the gully, because it won’t catch yarns. The black plastic handle is ergonomically contoured. Blade width: 10 inches.Order No. Description Weight 162 Plain Carpet Spread er 8 oz.
No. 509 Corner SupportThis simple, clever item is an answer to the old prob-lem of stretch ing off outside corners. The tool is “Z” shaped, to work left or right on corners. Constructed with a heavy-duty steel backbone and padded with a 1/8" thick extruded rubber skin. Attractively pack aged in a six-pack counter display box.Order No. Description Weight 509 Corner Support 2 lbs.
No. 514
No. 507
No. 161Notched
No. 162Plain
No. 509
No. 513
NOW AVAILABLE IN NOTCHED OR PLAIN!
No. 600
Powerrods
No. 505
No. 506
No. 612
No. 600 Deluxe Adjustable Knee KickerNew Power Rod construction provides improved force transfer from the kicker body through to the pin plate. The pin depth adjustment assembly is more durable and precise due to added support from the power rods. New chrome finish is attractive and highly du-rable.
The high profile head easily spans stretcher heads or tubes. Recessed trigger provides 5 length adjust-ments from 171/2" to 211/2". The extra-thick bumper has a seamless neoprene boot. The wide head has 3 nap grips and 16 adjustable steel pins. Comes with cap cover. Parts WeightOrder No. Description per pack Each 600 Knee Kicker 1 51/8 Ib. 1505-K Gripper Inserts 3 2 oz. 1601-B Pin Plate 2 3 oz.
No. 612 Knee KickerFeatures a five-setting length-adjustment channel that ex tends length from 171/2" to 211/2", operated by a recessed trigger that locks in each position. The head grips carpet with the combined hold of three replace-able nap grippers and 16 adjustable steel pins. The pin dial gives a visual ref er ence of pin length. Pins are pro tect ed in storage by the cap cover. The re place able square bumper is foam-filled and covered by a tough, seamless, neo prene cover. Parts WeightOrder No. Description per pack Each 612 Knee Kicker 1 3 Ibs. 1505-K Gripper Inserts 3 2 oz. 1612-B Pin Plate 1 3 oz.
No. 505 Knee KickerAt last – an inexpensive knee kicker with great fea-tures, designed to stand-up to to day’s jobs! The No. 505 features telescoping steel tubes with four settings for length ad just ment, ranging from 21" to 241/2". Dou-ble-engagement but tons elim i nate hole elon ga tion.
The wide head features 3 replaceable nap grips, and 16 long hard ened-steel pins. Pins are adjustable with nine depth settings for use with any car pet. The re-place able square bumper is foam-filled, and features a tough, seamless, neo prene cover.
The No. 505 is so good, we guarantee it three years! Parts WeightOrder No. Description per pack Each 505 Knee Kicker 1 31/2" Ibs. 1601-B Pin Plate 2 3 oz. 1505-K* Gripper Inserts 3 2 oz.
*Fits most popular models
No. 506 Mini Knee KickerWe made the popular No. 505 smaller, for use in cramped areas where full-sized kickers are awkward. Narrow halls, closets, or bath rooms are now more easily stretched. Du ra bly constructed, with the great features of the No. 505 Knee Kicker. Order Length Length Weight No. Description Closed Open Each 506 Mini Knee Kicker 141/2 " 17" 31/2 Ib.
No. 197Comfort KneesKneeling and knee-kicking protection in one great pad! See page 32.
NEW!
No. 301 Cushion Back CutterDesigned especially for trimming and cutting superdense 5/an gle blades cut either side of the row close and clean to help produce better seams.
Order No. Description Weight Blades
No. 302 Cushion Lock Cutter
produce better seams. Order No. Description Weight Blades
No. 303 Loop Pile Cutter
Order No. Description Weight Blades
No. 304 Versa-Cutter-
Blades. When used with utility
cuts smoothly from the carpet’s
Also features a steel foot plate
Order No. Description Weight Blades
No. 300 Loop Pile Cutter
raising up.Order No. Description Weight Blades
No. 365 Row Separator
Order No. Description Weight/
No. 301
No. 302
No. 304
No. 300
No. 365
No. 303SELF- CLEANING
Nos. 301, 302, AND 303 CUT CLOSE!
CUT PILE
LOOP PILE
No. 113 & 113S Journeyman Straight EdgesThese cold drawn steel straight edges are accurately ground and tested before ship ment. Guaranteed to be straight with in
and red painted surfaces to protect against rust.Order No. Dimensions Weight
/ // / lbs.
No. 115 “T” SquareThis cold drawn steel straight edge is ac cu rate within ± /
Order No. Dimensions Weight/ /
No. 119 & 119S Combination Edges
it is usable for both resilient and carpet pur pos es. Order No. Description Length Weight
//
No. 334 & 334S Professional Straight EdgesAbsolutely accurate and guaranteed to stay straight. These pre ci sion ground straight edg es are made of special spring
Order No. Dimensions Weight/ //
No. 535 & 536 Carpet Straight Edges
Order No. Dimensions Weight/ / /4
/ / /
No. 540 6' Safety Edge
Order No. Dimensions Weight
Crain Flexible Straight Edges
Order No. Dimensions Weight///
No. 912 & 915 Steel Square/ /
squares are perfect for patterned sheet goods lay out.Order No. Description Body Tongue Width Weight
/
116
117
118
113S
113 119119S
115
334 334S
536540
912
915535
PROFESSIONAL MODELS!
540 SAFETY EDGE PROTECTS HANDS!
GUARANTEENos. 334 & 334S ARE MADE FROM SPECIAL SPRING STEEL. GUARAN-TEED FOR LIFE TO BE WITHIN .003" OF PERFECTLY STRAIGHT!
No. 435 Flex Axle Roller No. 436 Straight Axle RollerNo. 437 Bigfoot RollerNo. 438 Pro RollerThe pivoting axle of the Flex Roller pulls seams to geth er, while mixing the fibers for less visible seams. Nos. 435, 436, and 438 have spiked wheels that press through the pile to seal the carpet’s back into the hot melt ad he sives.
The No. 437 Bigfoot Roller is made with ribbed roll ers, making it especially good for fine-denier saxony, plush, and velvet carpets, as it will not snag the yarn or untwist pile fibers.Order No. Description Width Weight 435 Flex Axle Roller 4" 10 oz. 436 Straight Axle Roller 4" 14 oz. 437 Bigfoot Roller 55/8" 15 oz. 438 Pro Roller 6" 14 oz.
No. 476 Carpet TractorMade with 3 rows of spaced 11/4" dia. spike wheels which flatten seams, reduce seam-peaking, and mix fi-bers for less visible seams. Durably con struct ed and made in the U.S.A. Order No. Description Size Weight 476 Carpet Tractor 6" x 3" x 2" 2 lbs.
No. 180 Seam Squeezer SetThese powerful squeez ing springs force cushion-back carpets together, producing an improved seam. The grip per pins hold in the nap and maintain an inward squeez ing force. The in ward pressure can be perfectly regulated as de sired. Sold in pairs.Order No. Description Weight 180 Seam Squeezer Set 1 lb./set
No. 156 Seam Applicator BottleDelivers the adhesive perfectly, right where it belongs, making a stronger seam. Ad justs to allow for height vari-ations. Complete instructions are printed on each bottle.Order No. Description Capacity Weight 156 Applicator Bottle 8 oz. 2 oz.
No. 145 Seam Adhesive BottleUsed to seal the edges of carpets before seaming for stretched or gluedown jobs. Supplied with a special noz zle and a snap-on cap for storage.Order No. Description Capacity Weight 145 Seam Adhesive Bottle 8 oz. 11/4 oz.
Jiffytex Pints and QuartsJiffytex is pure, natural rubber which dries in a hurry, but will never change prop er ties. It won’t crystallize or crack with age, friction or vibration. Less work for the carpet installer; less waiting time on any job. Jiffytex seamed car pets can be power-stretched within 15 to 30 minutes. Jiffytex is quality-controlled for even, liquid con sis ten cy through out. Order No. Quantity Std. Pkg. Weight 164 Pint 12 1 lb. 163 Quart 12 2 lbs.
No. 437
No. 436
No. 438
No. 435
No. 476
No. 180
No. 163 No. 164 No. 156 No. 145LATEX NOT INCLUDED
No. 245 Crain Deluxe Carpet Trim merFeatures top-loading blade carriers, so blade changes are faster and easier. Wide open throat area provides smooth cutting action. Comes with six shims for height adjustment, and visual throat adjustment from the base for all kinds of carpet. Wall runner is treated with a non-skid material, and is angled outward for minimum wall contact. Order No. Description Weight Blades 245 Deluxe Carpet Trimmer 11/2 Ibs. 184 1245-U New Runner Pad, 245, 246 1/10 oz. -
No. 246 Carpet Trim merThis new trimmer is similar to other popular models but with faster blade change and throat adjustment. When the wall runner is removed, the blades are easily acces-sible. The wall runner is easily reinserted by inserting a pointed edge into a relief in the shim and lifting. Throat adjustment sockets are stamped in every shim, elimi-nating the need for a separate part. Order No. Description Weight Blades 246 Carpet Trimmer 2 lbs. 184
No. 247 Multi-Purpose Wall TrimmerA real time-saver when used to trim vinyl or carpet to fit walls! Slotted blades are used for carpet or vinyl trimming, while hook blades work best for carpet tiles. Comes with an anti-friction boot that for vinyl. Order No. Description Weight Blades 247 Wall Trimmer 2 lbs. 306, 308, 996
No. 297 Moulding Trimmer No. 305 “Z” Bar Trimmer The No. 297 trimmer cuts the proper length of carpet to tuck under vinyl mouldings. Cuts straight or contour edg es. Blades cut from the car pet’s back ing. The No. 305 cuts a proper overlap to fit under “Z” Bar. Cuts straight or con tour edges to fit quarry tiles or flat in stal-la tions. Comes with free Turn ing Tool!Order No. Description Weight Blades 297 Moulding Trimmer 8 oz. 300Y 305 “Z” Bar Trimmer 8 oz. 306
Nos. 152, 154 & 155 Stair Tools Constructed of tough, durable, alloy steel to withstand ham mer ing. The blades are ground to a perfect taper and won’t cut the carpet. Nickel plated.Order No. Description Width Length Weight 152 Wide Stair Tool 4" 8" 1 lb. 154 Narrow Stair Tool 27/8" 8" 1 lb. 155 Bent Stair Tool 31/2" 6" 1 lb.
No. 192 Turning Tool & No. 195 Carpet AwlThe bent-leg Turning Tool is used to turn carpet under “Z” Bar and to roll carpet into edge gully. The straight Car pet Awl has a heavy-duty high-carbon steel point er that ex tends through the plastic handle for hammering.Order No. Description Length Weight 192 Turning Tool 6" 3 oz. 195 Carpet Awl 61/4" 3 oz.
No. 305
No. 192 No. 195
No. 297
CHANGE
CHANGE
BENT
both carpet
CRAIN TAPES FEATURE:
smoke and odor-free
No. 929SUPRA-TRAK
No. 923MEGA-TRAK
No. 928VERSA-TRAK
CRAIN TAPES HELP REDUCE PEAKING!
SIX PACK!
No. 920 Deluxe Heat Bond IronFeatures an air-cooled heat shield to protect backings and an angle-out tip to comb off adhesive when remov-ing the iron at the wall. Teflon self-cleaning base is stan-dard. Dual indicator lights show “power-on” and “heat-ing” status. Strong, “U”-shaped handle and riveted iron tray resist breakage. Cord is 12' long SJO heat-resistant type. Instructions and two-year guarantee included. Ap-proximate heat range is 220° - 420°F. Runs at 800 watts. The No. 921 Kits come with a steel case that can also hold a roll of tape, and 25' 3 prong extension cord. Order WeightNo. Description Each920* 120 volt Iron 31/2 lbs.920V* 220 volt Iron 31/2 lbs.921* 110 volt Kit 9 lbs.921V* 230 volt Kit 9 lbs.903 Universal Tray 8 oz.-
* Add “F” for flat models.
No. 900 Heat Bond IronThe super low profile and ultra-narrow handle of this iron make it easier to get the seam together near the back of the iron. Dual indicator lights show both power-on and heating status. Self-cleaning Teflon coated base and 12' long SJO cord are standard. The heavy-duty handle and riveted tray are highly durable. Available in grooved models only. Ap-proximate heat range is 220° - 425°F. Runs at 800 watts. The No. 901 Kits comes with a steel case that can also hold a roll of tape, and 25' 3 prong extension cord.
Order WeightNo. Description Each900 110 volt Iron 31/3 lbs.900V 230 volt Iron 31/3 lbs.901 110 volt Kit 9 lbs.901V 230 volt Kit 9 lbs.903 Universal Tray 8 oz.
No. 890 6" S/C Pro IronsThis 6" iron has a full-sized element to ensure uniform heat transfer. Low profile flows smoothly through the seam. Spe cial “angle-out” tip design prevents “drag-ging-off” ad he sive when removing the iron from the seam. Built in heat shield protects synthetic backings. Self-cleaning Silverstone™ base is standard. Our 6" Iron kits come in a No. 898 Combo Case, which will hold both 3" and 6" irons. Approximate heat range is 250° - 375°F. No. 890 120V irons run at 1000 watts. Order WeightNo. Description Each890 6" S/C Pro Iron 5 lbs.895 6" S/C Pro Iron Kit 13 lbs.898 Combo Case 8 lbs.899 6" Iron Tray 1 lb.
No. 935 Seam SteamerThe steamer gently reheats the seam area. This makes the seam pliable so that the peak may be pressed flat. The repair can be done quickly without cutting apart the seam or pulling the carpet off the strip. The steamer is also helpful for removing roll crush.Order Approx.No. Description Heat Watts Weight935 Seam Steamer 210°F 1200 43/8 lbs.
No. 920
No. 900
No. 921
No. 921
No. 898
No. 890
No. 935
ANGLE-OUT BACK TIP
ANGLE-OUT BACK TIP
FULL-SIZED ELEMENT
The Crain steamer repairs peaked seams and pile crush!
No. 450 Deluxe Strip CutterThe new blade stabilizers on the No. 450 minimize deflec-tion and provide increased cutting force. The extra long blades will cut a diagonal in regular strip or a straight cut in architectural. The han dle features a blade storage area and comes complete with extra blades. Constructed of steel and nickel-plated to last a lifetime. Guar an teed 12 months.Order No. Description Weight Blades 450 Deluxe Strip Cutter 11/4 lbs. 451
No. 570 Clear CanAt last, there is a better nail dispenser! Just squeeze it and the top opens to quickly dispense nails. Release it and it closes tight and won’t spill. Sized at 2" in diameter and 6" in length, it easily holds 250 stubby nails. A real time sav er!Order No. Description Weight 570 Clear Can 2 oz.
Hammers & MalletsOrder No. Description 332 ECONOMY HAMMER – Forged steel head is securely fas-
tened to a fiberglass handle. Weight 20 oz.
323 VAUGHAN 20 oz. RIPPING HAMMER – 13" Wood handle of fire hardened ash with “Rim-Tempered” head. Well bal anced.
322 VAUGHAN 24 oz. RIPPING HAMMER – Straight claw is ideal for tackless removal.Extra-long hickory handle. Weight 24 oz.
296 VAUGHAN HALF-HATCHET – A multipurpose tool for cut-ting and hammering down tackless strip. Hardwood handle and a sharpenable alloy steel blade. Weight 22 oz.
151 WHITE RUBBER MALLET – Perfect for knocking down met-al mouldings – non-marring. Weight 20 oz.
No. 172 Magnetic Tack HolderThis magnetic tack holder makes a difficult job easy. It reaches down into the carpet pile where fingers won’t go. Perfect for stair work. Made 51/2" long, in a hexagon shape. The powerful mag net tip is guaranteed for life.Order No. Description Weight 172 Magnetic Tack Holder 8 oz.
Nos. 362 & 363 Door Pin ToolsBoth tools have a solid steel push pin mounted on one end for pushing out the door pin. The opposite forked end fits snugly under the head of the door pin, applying equal pressure on both sides as the pin is lifted out. The forked end is finely tapered for easy insertion. The No. 363 also features a capture spring which prevents the greasy pin from falling on the carpet.Order No. Description Weight 362 Door Pin Tool 8 oz. 363 Deluxe Door Pin Tool 9 oz.
No. 166 Crain Magnetic Driving BarFeatures a magnetic tip for easier use in awkward plac-es. The shock proof rubber handle is vulcanized to the forged alloy steel body to eliminate vibration sting and fracture. The slender nose fits under low wall heaters and toe kicks.Order No. Description Weight 166 Magnetic Driving Bar 5 lbs.
Crain Aluminum DrivesThese fasteners are ideal for securing all types of tackless and metal mouldings to concrete, terrazzo, marble, slate, or ceramic floors. The semi-square body squeez es tight when hammered into a 1/8" drilled hole. The No. 078 oval head is for metal with counter-sunk screw holes.Order No. Description Hole Size Weight 580 1/8" x 5/8" Drives 1/8" x 3/4" 1 lb. 780 1/8" x 7/8" Drives 1/8" x 1" 1 lb. 078 1/8" x 7/8" Drives 1/8" x 7/8" 1 lb. 783 3/16" x 7/8" Drives 3/16" x 1" 1 lb.
No. 5805/8" x 1/8"LONGFLAT HEAD
No. 7807/8" x 1/8"LONGFLAT HEAD
Carbide or masonry bits on p.32 (carbide) or 33 (masonry).
MAGNETIC TIP
ALUMINUMDRIVES
MAGNETIC TIP
LIFT PIN - Nos. 362 and 363 CAPTURE
SPRING
PATENTPENDING
TOP BLADE STABILIZER MINIMIZES DEFLECTION
No. 7837/8" x 3/16"LONGFLAT HEADHEAVY DUTY
No. 0787/8" x 1/8"LONG OVALHEAD FOR COUNTER-SUNK HOLES
No. 615 Pro Stapler KitA proven winner for its pow er, du ra bil i ty, and economical pricing, the No. 615 uses standard Crain No. 619D, Duo-Fast® No. 5418 or No. 5415 elec tric tacker staples (or ge-ner ics). Features a pow er ful 11 amp. so le noid that drives into hard woods, a jam-resistant mag a zine that holds 100 sta ples, and an easy-access driv er channel for quick re-moval of broken staples.
The Pro Stapler has also been designed to make your work eas i er. Low overall height fits under stair risers. Its point ed tip easily parts carpet yarns. High impact plas tic shell makes it highly durable and long lasting in use. Also equipped with a trig ger-lock for safety. We also sell 9/16" Shur-Fast Staples (No. 619D) for use with this tool.Order No. Description Amps/Volts Weight 615 Pro Stapler Kit 11/115 7 lbs. 619D 9/16" Shur-Fast Staples - - - 11/8 lbs. 486 Safety Glasses - - - 2 oz.
No. 518 Stair ClawThis new tool provides a simple means of stretching stairs and forming carpet around the stair nosing. Hook the claw on the stair and pull the handle down. The pulling action of the gripper teeth stretches the carpet across the stair, while the bottom side tucks it up under the stair nose. Recesses in the bottom edge make for easy stapling. The stair claw makes a tough job easier!Order No. Description Weight 518 Stair Claw 2 oz.
No. 132 Heavy-Duty Hammer TackerTotally new and made by Crain, this tacker has a heavier head and longer handle to deliver greater force. Takes Duo-Fast® 7512 3/8" and 7516 1/2" staples or generics. Driving mechanism is simpler and more durable. Jams are easily cleared without disassembly. Superb value. Order No. Description Weight 132 Heavy-Duty Hammer Tacker 3 lbs.
No. 130 Staple Hammer and StaplesThis proven tool is perfectly balanced for pad sta pling. The rear-loading staple magazine holds 160 sta ples. Cleverly con struct ed, with only four moving parts. Built to take a beating.Order No. Description Weight 130 Staple Hammer 2 lbs. 141C 3/8" Chisel Point (5000 pack) 1 lb. 142D 3/8" Divergent Point (5000 pack) 1 lb.
No. 147 Edge Binding StaplerIdeal for binding area rugs or carpet samples. The staple guide adjusts the throat opening or can be removed al to-geth er. The rear-loading magazine holds 150 staples. A well-designed tool, made to last a lifetime.Order No. Description Weight 147 Edge Binding Stapler 1 lb. 148 5/16" Staples (5000) 1 lb.
No. 126 Staple RemoverThis heavy-duty tool speeds removal of staples in under-layments or in carpets sta pled close to the wall. Con-structed of aluminum, with steel staple hook.Order No. Description Weight 126 Staple Remover 8 oz.
No. 617 Staple Saver Box No. 618 Staple Saver BoxThe No. 617 and No. 618 Staple Saver Box are now a two-piece telescoping square ratchet tube for improved du-rability. The No. 617 holds Duo-Fast® No. 5418 Electric Tacker Staples. The No. 618 holds Duo-Fast® No. 7512 Hammer Tacker Staples. Saving staples saves money!Order No. Description Weight 617 Staple Saver Box (5418) 2 oz. 618 Sta ple Saver Box (7512) 2 oz.Duo-Fast® is a registered trademark of the Duo-Fast® corporation.
ROUNDEDCAP
POWERFUL11 AMP
SOLENOID
No. 518
No. 130
No. 147
No. 617
No. 126
No. 618
No. 615
No. 619D 9/16" LENGTH SHUR-FAST
HIGHIMPACTSHELL
JAMRESISTANTMAGAZINE
No. 132Takes Duo-FastPad Staples
3/8" LENGTHCHISEL
5/16" LENGTH
3/8" LENGTHDIVERGENT
NEW!
No. 725 Deluxe Carpet Knife
-tra blades. Dull blades are easily
new blades slide into place and
with a bright polished surface. Order No. Description Weight Blades
No. 726 Pivoting Carpet Knife
access to blade storage or replacement. Die-cast in alu-
clud ed. Order No. Description Weight Blades
No. 330 Push-Button Carpet Knife
Order No. Description Weight Blades
No. 720 Hinged Carpet Knife
Order No. Description Weight Blades
No. 217 Crain Razor Knife
Order No. Description Weight Blades
No. 191 Crain D.I.Y. Razor Knife
nut.Order No. Description Weight Blades
No. 735 Carpet Pad Knife
Order No. Description Weight Blades
QUICKBLADECHANGE
No. 725
No. 725
No. 726
No. 330
No. 720
No. 217
No. 191
No. 735
No. 728 Pocket Utility Knife-
comfort and has a special compartment for blade stor-
precise cutting. Order No. Description Weight Blades
No. 103 Crain Carpet Knife
lute ly sharp and holds its edge after others would be dull. Also features a truly comfortable contoured handle. Order No. Description Weight
Hyde Carpet Knives*/ –
–
–
trimming around doors and corners.
Sharpening StonesNo. 153 Stone HolderNo. 910 Sharpening StoneNo. 930 Laminated Sharpening StoneThese silicone carbide sharpening stones are especially
Order No. Description Weight
Carpet ShearsNo. 187 Big Loop Nap ShearsNo. 190 Duckbill Nap ping ShearsCrain No. 496 8" Carpet ShearsNo. 187 – These nap shears feature offset handles for
and pol ished stain less steel with coat ed handles.No. 190 –
No. 496 – -
Order No. Description Watts Weight
No. 203 & 204 Glue Guns
-
Order No. Description Watts Weight
/4
/
No. 728
No. 103
No. 169
No. 930
No. 910
No. 153
No. 170
No. 171
No. 4968" NAPPING
No. 187
Nos. 628 & 629
No. 204 No. 202
No. 203
No. 201
No. 190
FOLDING POCKET KNIFE
No. 174
No. 174 Instant Repair Tool
-eter hole. Made of du ra ble aluminum.Order No. Description Weight Blades 174 Instant Repair Tool 2 oz. 1174-A
Carpet Sewing Threads
than linen.Order No. Description Weight 769 Econo. Natural Poly 6 oz. 771 Natural Waxed Linen 6 oz.
No. 354 Tool Pouch & No. 407 Square Tool PouchNo. 354 – primarily a pocket pouch. Fits either in the
-
No. 407 – wider and deeper for greater storage ca pac-i ty. Hangs on belts. Constructed of durable leather.Order No. Description Weight 354 Pocket Tool Pouch 43/8" x 71/2" 8 oz. 407 Square Leather Pouch 41/2" x 71/2" 6 oz.
Sewing ToolsNo. 760 Sewing PalmThis hide-bound iron thimble palm is for faster sewing.Order No. Description Weight 760 Sewing Palm (right hand only) 3 oz.
Crain NeedlesOrder No. Description Std. Pack 761 21/8" Long Needles 25 per pkg. 762 3" Long Needles 25 per pkg.
Open-End ThimblesMade from nickel-plated brass with coarse grate. No. Usage/Size No. No. Usage/Size No. 712 Finger, Small #12 714 Finger, Large #14 713 Finger, Medium #13 715 Thumb, #00
No. 950 Professional Installers Tool KitThe installers tool kit has been designed to incorpo-rate the basic tools that are needed for carpet instal-
In clud ed are: 24" tool box, knee kicker, deluxe trim-mer, back cutter, strip cut ter, knife pouch, chalk box and 8 oz. chalk, seam ap pli ca tor bottle, razor blade knife, utility knife, molding lifter, 20 oz. hammer, stair tool and duckbill nap shear.Order No. Description Weight 950 Professional Installers Tool Kit 29 lbs.
No. 081 “GritEdge” Rod Saw Blades
Order No. Description Length Weight 081 Rod Saw Blade 10" 1/2 oz.
No. 769Polypropelene
No. 771Linen
No. 354 No. 407
No. 765
No. 761
No. 762
No. 712 No. 713 No. 714 No. 715
No. 950
No. 081
No. 760
No. 237 & 238 Cove Base Guns
these guns are designed for the job and are of indus-trial quality. They feature all-steel con struc tion, and a smooth rod push mechanism.Order No. Description Capacity Weight 237 Strip Glue Gun 1 qt. 2.5 lbs. 238 Strip Glue Gun 1/10 gal. 1 lb.
No. 235 6" Disposable Cove Noz zleNo. 236 3" Disposable Cove Noz zle
beads for 6" base. No. 236 lays down three beads for 3" base.Order No. Description Weight
No. 532 Topset Gouge
-ners. The 5/32" wide blade adjusts for depth and can
Order No. Description Weight 532 Topset Gouge 1 oz. 533 Replacement Blade 1 oz.
Blades for Discontinued Crain SawsThe No. 552 is for use on discontinued No. 550 Jamb & Inside Corner Saws. No. 803 & 804 for use on dis-continued Nos. 800 & 810 Super Saws. No. 803 is best used for wood that splinters like mahogany. No. 804 is best for undercutting along doors and door jambs.Order No. Description Weight Teeth 552 Carbide-Tipped Blade 10 oz. 40 803 Combination Blade 10 oz. 100 804 Carbide Blade 10 oz. 40
No. 976 & 977 Replacement Bits for Discontinued Crain Groovers
3/16" shank diameter for
metal impregnated “safety floors”, which require a power saw with carbide tooth blade.Order No. Description Shank Dia. Weight 976 11/64 Replacement Bit 3/16" 1 oz. 977 1/8 Replacement Bit 3/16" 1 oz.
No. 2363 inch
No. 2356 inch
No. 237quart
No. 533
No. 552 No. 803 No. 804
No. 533Gouges back for tight corners!
For No. 550 ONLY: For Nos. 800 and 810 ONLY:
No. 2381/10 gallon
NOW AVAILABLE:Both 3" and 6"disposable nozzles
No. 700 Bearcat™ Stripper MachineA truly adjustable machine, made to remove today’s flooring prod-ucts faster and easier. This Bearcat™ Stripper features a pat ent ed, qui et er-operating, cam-driven oscillating cut ting system. No belts or pul leys here! The shearing blade motion is directly cam-driven through mechanical linkage to the 3/4 h.p. motor.Order No. Description Amps Weight L W H700 110 volt Stripper 10 85 lbs. 14" 24" 17"*
Blades sold separately. Eight blade sizes will fit other models:
701 Resilient on Concrete 6 oz. 4" 6"702D Resilient on Concrete 6 oz. 4" 6"703 Rubber-Back 8 oz. 5" 6"704D Rubber-Back 8 oz. 5" 6"705 Multi-Purpose 8 oz. 3" 10"706D Multi-Purpose 8 oz. 3" 10"707 Wide Carpet 13 oz. 3" 16"708 Floor Cleaner 1 lb. 5" 16"(“D” signifies double-edge) *Collapsed size
No. 700
“off-center” blade mounting for use under toe spaces or at the wall.
cut ting either right or left.
No. 265 Jus-Push Cutter
-ened point that lifts the carpet into the blade. The point
-
Order No. Description Weight Blades
Nos. 375 & 375S Big Scraper & Blades
Order Handle LengthNo. Description Min. Max. Wt. Blades
No. 350 & 360 Pro Strippers
-
Order No. Description Length Weight
No. 390 Inertial ScraperThis new scraper helps you plow through the tough-
Order No. Description Weight/4 lbs.
No. 843 Carpet ClampNo. 844 Pulling Claw
hands.Order No. Description Weight
No. 230 Deluxe Floor Scraper
Order No. Description Weight
/
No. 265
No. 390
No. 350
No. 360
No. 375S
No. 375
No. 843
No. 844
No. 232 No. 231
No. 230
No. 001 Model “A” Tile Cutter-
manded by professionals. The straightness of cut is factory-calibrated to +/-.005" prior to shipment, which is essential for precisely matching edges in pattern work. The 123/4" blades are made with a special high-carbon steel edge that is sharp and long-lasting. The cutter also has a locating stop for repeat cuts at the wall. When the tile to be cut is placed in the cutter, dim. A equals dim. B. Also comes with carrying case with cast-ers that can function as a helpful tile tote. Order No. Description Weight 001 Model “A” Tile Cutter 17 lbs.
No. 008 18" Vinyl Special Tile Cutter
in clud ing 18" square slab tiles. The 183/4" blades cut 12" x 12" tile diagonally. The offset base al-lows the operator to hold the tile more securely while cutting.Order No. Description Weight 008 18" Vinyl Special Cutter 57 lbs.
No. 355 Bent-Leg Linoleum Dividers
-sure a mistake-proof tool. Fits comfortably in the palm for control. No compass-like arms to get into your way or interfere with close mea sure ments. Order No. Description Rep. Needle Weight
No. 382 Double-Needle Dividers
into the palm of the user’s hand, and double nee-
bent leg and a dismountable straight leg for pencil scribing. The locking knob is easily tightened or
Order No. Description Rep. Needle Weight 382 No. 129 2 oz.
No. 380 Deluxe Dividers
industry standard. Con struct ed of forged steel
expand to scribe up to 14" circles.Order No. Description Rep. Needle Weight
No. 460 Vinyl Sealer BottleOne multi-purpose nozzle for sealing all cushioned
-
Order No. Description Weight 460 Vinyl Sealer Bottle 2 oz.
Trim Line® Vinyl Corner System
inside or outside corner areas. Excellent solution
Order WeightNo. Description No. per Tube per Tube
272 Outside Gold Corners 25 4 oz.273 Inside Gold Corners 25 4 oz.
No. 008
No. 001
No. 382
NEW!No. 001 comes with carrying case and tile tote
No. 380No. 355
No. 460COMPLETE INSIDE CORNER
INSIDE
GOLDSILVER
INSIDE
COMES WITH APPLICATOR
COMPLETE OUTSIDE CORNER
OUTSIDESILVER - #270GOLD - #272
INSIDESILVER - #271GOLD - #273
OUTSIDE OUTSIDE
Trim Line® Vinyl Corners:
Crain Seam Rollers-
sign that lets you work close to the wall. The 2" diameter polished steel roller rides on a ball bear-
-nience. The No. 348 & No. 349 rollers feature 9"
6" hickory han dles.OrderNo. Description Wt. Width Dia. Handle348 Square Edge Roller 2 lbs. 2" 2" 9"348S Square Edge Roller 2 lbs. 2" 2" 6"349 Round Edge Roller 2 lbs. 2" 2" 9"349S Round Edge Roller 2 lbs. 2" 2" 6"
No. 333 Crain Extension Wall Roller
-trol with less ef fort. The tri-sectional rollers total 71/2" wide. The new twist-lock adjustable handle telescopes from 17" to 27". The bright nickel-plat-ed parts won’t rust.Order No. Description Weight 333 Extension Wall Roller 3 lbs.
No. 346 “J” RollerThis hand roller is designed especially for use by plastic laminate installers. The 14" aluminum handle is designed to place the necessary pres-
wide, solid, non-marking roller is re cessed on the end to permit rolling near walls or back splash es.Order No. Description Weight 346 “J” Roller 8 oz.
Nos. 075 & 076 Vinyl RollersCrain No. 075 (75 lb.) and No. 076 (100 lb.) rollers
-
(No. 074 - sold separately). Constructed of solid
rounded corners to protect flooring materials from indentations. Each roller section “floats” in de pen-dent ly on the axle to automatically compensate for subfloor ir reg u lar i ties. The end roller sec tions are
-ing. The yoke has a detachable handle so that both may be carried sep a rate ly. Order No. Desc. Wt. Dia. Width Height 075 Vinyl Roller 75 lbs. 41/2" 16" 38" 076 Vi nyl Roller 100 lbs. 51/2" 16" 38" 074 Roller Case 8 lbs. --- --- ---
No. 143 Disp. Adhesive Syringe-
prohibits sale in these states:Connecticut, Maryland, New Jersey, Delaware, Mas sa chu setts, New York, Maine, New Hampshire, Rhode Island.Order No. Description Weight
NEW!75 lb. & 100 lb. rollers now come in carrying case with wheels
No. 349
No. 349S
No. 348
No. 346No. 333
No. 143
No. 075 - 075 lb.No. 076 - 100 lb.
No. 074Vinyl RollerCase w/Wheels
Holds 75 lb. & 100 lb. Rollers ONLY!
SOLD SEPARATELY - HOLDS ROBERTS AND GUNDLACH
U.S. PATENT#7,188,724 B1
No. 348S
FAST, SECURE THREADED ADJUSTMENT
SEAM CUTTING INLAYING SOLID FIELD IRREGULAR SCRIBING
OUTSIDE CORNER SCRIBER
No. 188 Crain Hinge ScriberAt last – an improved seam scriber for linoleum, sheet vi-nyl, and cushion flooring materials. The tool features a heavy-duty hinged-guide, with a threaded ad just ment rel-a tive to the needle. The 3-arm knob clamps tightly after the adjustment. The tool is comfortable to the grip, giving the user good control. Uses No. 129 Scriber Needles.Order No. Description Weight 188 Hinge Scriber 4 oz.
No. 111 & 112 ScribersThese versatile tools feature the original famous Air-way quality design and con struc tion — a heavy die-cast hous ing, with a sturdy precision-fitting plated steel bar. No. 111 features a 6" bar. No. 112 features an 8" bar with an extra needle hole in the housing for circle scribing. Both come with one needle, and use No. 129 Scriber Needles.Order No. Description Length Weight 111 Scriber 6" 4 oz. 112 Scriber 8" 8 oz.
No. 240 Bar ScriberTelescopes to make scribes 1" to 23" in depth. The roller tip guides against the wall. The two needle holders take Crain No. 129 Needles.Order No. Description Weight 240 Bar Scriber 4 oz.
No. 194 Crain Outside Corner ScriberDesigned for easy and accurate scribing of outside cove corners. Polished metal construction. Comes with one needle. Uses No. 128 Needles.Order No. Description Weight 194 Outside Corner Scriber 3 oz.
No. 110 Inside Cove Corner KitThis 3-piece tool kit really simplifies inside cove corner in stal la tions. The kit consists of a cove template, a pin vise, a special cove scriber, and detailed in struc tions. The sys tem is foolproof, once mastered.Order No. Description Weight 110 Inside Cove Corner Kit 8 oz.
No. 109 Pin ViseFeatures a hexagonal chuck that firmly grips No. 129 re-place ment needles. Perfect for scoring tile or linoleum pattern layouts. Size: 5/16" di am e ter by 4" long.Order No. Description Weight 109 Pin Vise 1 oz.
No. 128 & 129 Scriber NeedlesThese sharp, high carbon steel scriber needles fit all com-mon models of scribers and dividers. Come packaged 50 per envelope. No. Size For use in Tool 128 .058 X 9/16" 194 Outside Corner Scriber ONLY! 129 .063 X 7/8" 109 110 111 112 188 240 355 380 382
No. 071
No. 012
No. 026A
No. 013
No. 072 No. 073
No. 102 Crain Combination KnifeThis fine knife combines both pointed and hook blades, making it two tools in one. The handy hook cuts both car-pet and sheet goods, and is easily sharpened. The con-toured cherrywood handle fits per fect ly in your hand.Order No. Description Weight 102 Crain Combination Knife 4 oz.
No. 730 Utility KnifeFeatures an easy-to-grasp thumb knob for quick opening without a screwdriver, and ample leverage for tightening se-curely. Cast of lightweight aluminum, with a knurled, anti-slip, brightly polished surface. Order No. Description Weight Blades 730 Utility Knife 4 oz. 621, 622 & 996
No. 189 Hook Handle Utility KnifeWider contoured body and hook at the back allows your fingers to pull with increased power. Great on vinyl when used with hook blades, and takes all utility blades as well. Order No. Description Weight Blades 189 Hook Handle Utility Knife 4 oz. 621, 622 & 996
No. 727 Delphin KnifeFeatures a unique hinged body joint and a large tightening thumb knob for easy open ing and blade changing of both hook and utility-type blades. The contoured body shape en hanc es gripping. Extra blades are stored in the handle. Order No. Description Weight Blades 727 Delphin Knife 4 oz. 621, 622 & 996
Dexter Knives and Rep. BladesThe Dexter linoleum knives are the industry standard for quality. Blades are es pe cial ly ground for vinyl and li no leum cutting. No. 060 Linoleum Knife and No. 063 Vinyl Knife are permanent riveted blade and handle com bi na tions. No. 066 10-D Handle holds any of Dexter’s high-carbon steel tang threaded replaceable blades.Order Std. Pkg.No. Dexter No. & Description Package Weight060 X752 1/2 Linoleum Knife 12 11/4 lbs.063 VX752 1/2 Vinyl Knife 12 11/4 lbs.066 10-D Handle 12 11/2 lbs.061 X752 1/2 D Rep. Lino Blade 12 1 lb.064 VX752 1/2 D Rep. Vinyl Blade 12 1 lb.067 X2AD Rep. Short Point Blade 12 1 lb.
No. 070 Dexter Custom Handle & BladesThis knife has no equal. It is engineered to make your work easier. Just unscrew the end cap, and the knife is open. Stores 5 blades inside. Comes with five No. 073 Blades.Order No. Description Package 070 Custom Handle 1 071 Long Point Lino Blade 2 072 “V” Sharp Hook Blade 5 073 Heavy Duty Straight Blade 5 073C Heavy Duty Straight Blade 100
No. 005 Ward HandleThis knife features 2 types of blades for its hardwood han-dle. Blades are easily changed, or adjust back and forth or up and down. Surgical steel blades cut clean.Order No. Description Package 005 Ward Handle 1 012 Standard Blade 12 013 Heavy Blade 12
No. 006 Airway KnifeThis knife is specially contoured for comfort. Made of smooth die-cast aluminum with close-fitting tolerances. One screw loosens the case for easy blade changing.Order No. Description Weight 006 Airway Knife 6 oz. 025A Airway St. Blades, 12/pkg. 1 oz. 026A Airway Hook Blades,12/pkg. 1 oz.
No. 970
No. 971 No. 972
No. 963
No. 960
No. 961
No. 962
No. 979
No. 986
No. 985No. 983
No. 987
No. 988
SIMPLE DEPTH ADJUSTMENT
No. 970 Power GrooverNo. 971 12 Tooth Carbide BladeNo. 972 Diamond Groover BladeThis tool tracks in the seamline to cut a trapezoidal groove for welding. Features simple, precise depth adjustment, effective chip control, and metal carrying case. Comes with a 12 tooth 130mm carbide-tipped blade (No. 971). This blade is compatible with other common groovers, and has trapezoidal teeth which can be resharpened. Choose the heavy grit diamond blade for metal impregnated safety floors (No. 972). 110V AC 9A No load RPM 12,000. Maxi-mum cutting depth 4mm. Order No. Description Weight 970 Power Groover 20 lbs. 971 12 Tooth Carbide Blade 8 oz. 972 Diamond Groover Blade 1 lb. 1 oz.
No. 960 Heat Weld GunNo. 961 Triangular Welding TipNo. 962 Round Welding TipNo. 963 Pencil-Tip NozzleNo. 979 Universal Welding TipThis electronic gun features precise heat, and comes with a pencil-tip nozzle (No. 963), triangular tip (No. 961) and round tip (No. 962). Our pencil tip nozzle and tips are stan-dard size to fit other common guns, and are sold separate-ly. The No. 979 is a universal tip for both Crain No. 960 or previous No. 980 heat guns, and adjusts for welding 3mm or 5mm round threads, or half moon triangular threads.Order No. Description Weight 960 Heat Weld Gun 3 lbs. 961 Triangular Welding Tip 1 oz. 962 Round Welding Tip 1 oz. 963 Pencil-Tip Nozzle 3 oz. 979 Universal Welding Tip 4 oz.
No. 985 Quarter Moon KnifeNo. 986 Trim GuideUsed for trimming the excess vinyl weld thread flush to the floor’s surface, after the weld has cooled. The knife’s flexible top edge is razor-sharp. Pushed against the weld excess, this curved edge shaves the weld flush. This may be done in steps, first using the trim guide, and then mak-ing a final pass over the seam with the knife only.Order No. Description Weight 985 Quarter Moon Knife 2 oz. 986 Trim Guide 1 oz.
No. 983 Hand Groover & BladesThis tool is most often used in doorways or to finish the ends of long seams where the power groover can’t go. Comes with several extra blades stored in the hollow han-dle. Made to cut by pulling.Order No. Description Weight Rep. Blade 983 Hand Groover 2 oz. 984
No. 987 Pressure RollerUsed to roll the vinyl welding thread tightly into the groove in awkward areas, such as up coved walls. The handle is drilled through, so the welding thread passes through it in stead of the welder tip for this usage.Order No. Description Weight 987 Pressure Roller 2 oz.
No. 988 Vinyl Welding KitComes with all the tools you need to do basic vinyl weld-ing, all at a great price. (Includes: Nos. 960, 970, 955, 985, 986, Instructions and Metal Car ry ing Case.) Order No. Description Weight 988 Vinyl Welding Kit 27 lbs.
No. 965 Skiving Knife with Replacement BladeNo. 966 Replacement Blade OnlyThis knife for trimming heat weld rod flush at the seams has a sharp razor blade that’s replaceable. Eliminates difficult resharpening of traditional quarter moon knives. Cuts in two passes with the built-in trim guide. Take the first pass with the guide under the blade, then pivot it out from under on the second pass. The flexible blade and trim guide won't gouge high spots. Order No. Description Weight
965 Skiving Knife w/Repl. Blade 7 oz.966 Replacement Blade Only ¼ oz.
No. 955 Pull Hand GrooverNo. 956 Pull Hand Groover Blades (3)A pull hand groover improves control and permits faster work. Adjustable fin tracks in the seamline to control groov-ing depth. Useful for starter cuts for a power groover, in tight areas like doorways, or when floors aren’t level. Comes with 3 blades, one in the tool and 2 stored in the handle. Replacement blades are an economical 3 pack.Order No. Description Weight
955 Pull Hand Groover 6 oz.956 Pull Hand Groover Blades (3) ½ oz.
No. 740 & 990 Deluxe Heat GunsThese are our highest quality flameless heat guns, made to last, and avail able in two mod els. A high-speed uni ver sal motor blows instant torrid hot air up to 1000°F. The ad just-able intake shuttle gives you the temperature you want.
A touch to the 3-way switch provides hot, cold, or off. The big 13/16" diameter nozzle houses a replaceable element. Both equipped with an adjustable stand and 8' 3-wire cord and plug. Each gun comes with carrying case.Order Rep.No. Description Amps Max°F Weight Element740 Deluxe Heat Gun 14 750° 4.5 lbs 1740-E990 Deluxe Heat Gun 14 1000° 4.5 lbs. 1990-E740K Multi-Purpose Case 4.0 lbs.
No. 751 Thriftline Heat Blo GunThis powerful gun rapidly heats material with tem per a tures adjustable from 300° to 1000°F. Fea tures a 6' heat-re sis tant cord and a switch that blows hot or cold. Stands up right to avoid burning the floor. Industrial quality, with a ther mo-cou ple element for precise heat control. Made in Tai wan.Order No. Description Volts Watts Max°F Weight751 Thriftline Heat Gun 110 1200 1,000°F 2 lbs.
Propane Gas Torches and HosePropane torches provide a broad flame that’s adjustable to a maximum of 2400°F. The trigger valve model has a pilot that ig nites the full flame when the curved lever is pressed. No. 094 hose is used for refilling the B-91 Cyl in der.
New regulations require that any liquid propane “reservoir tank” over 4 lbs. which may be used to refill our No. 091 B-91 Propane Cylinder must have a Overflow Protection Device (OPD) Valve. This “reservoir tank” must have two valves, one OPD for refilling itself, and another non-OPD, which is required for refilling our No. 091 Cylinder. The No. 091 does not require and cannot be refilled using an OPD valve. For more details please contact your local pro-pane equipment supplier.Order No. Description Weight
089 491-5 Tip 1 lb.090 2C Trigger Valve 2 lbs.091 B-91 Cylinder Only 2 lbs.094 4' Filler Hose 1 lb.
No. 751
FIRST PASS GUIDE UNDER
FLEXIBLE BLADE AND TRIM GUIDE WON'T GOUGE HIGH SPOTS!
SECOND PASSGUIDE PIVOTED
No. 965 BUILT-INPIVOTING TRIM GUIDE
No. 966
No. 955No. 956
No. 089
No. 091Cylinder
No. 094 4' Filler Hose
No. 090
No. 740 No. 990
Nos. 740 & 990 NOW COME WITH FREE CARRYING CASE
No. 740K CASE ONLY ALSO AVAILABLE
NEW!
No. 565 18' Strap ClampClamps and holds lami-nate planks across widths up to 18 feet. Nylon strap coils inside the housing. No more strap all over the floor in the way of your work. New extra-long base will work under toe spaces. A real time-saving design!Order No. Description Weight 565 18' Strap Clamp 2.2 lbs.
No. 569 Strap ExtensionFeatures an 18' long strap with a standard wall hook on one end and a coupler plate on the other. Metal surfaces have felt pads to prevent scratching. Works with other popular strap clamps.Order No. Description Weight 569 Strap Extension .87 lbs.
No. 566 Floor ViseNew, improved, and manufactured by Crain. Features fast lever-based activation and deep draw suction cup for su-perior holding force. Attaches to face of laminate planks for hook-ups to clamps, allowing user to clamp in any di-rection or from anywhere in the room.Order No. Description Weight 566 Floor Vise .88 lbs.
No. 564 Variable Wall SpacerImproved with wider, heavier base and larger, ergonomic twist-knob that will accept an Allen wrench on the back side. Use to space planks from the wall or clamp and press the butt joints.
Order No. Description Weight 564 Variable Wall Spacer 1 lb.
No. 562 Plastic Spacers (10)Clever new design allows the spacer to maintain the proper size gap, even when the adjacent wall is undercut. The V-shape rests against the face of the laminate plank to prevent the spacer from tip-ping over. The two ends have different thicknesses, one at 3/16" and the other at 1/4", to ac-commodate various laminate manufacturer’s specifications.Order No. Description Weight 562 Plastic Spacers 5.28 oz.
No. 563 Tapping BlockMade of black plastic 3" x 7" x 3/4", with female grooves on one side and one end to mate with plank tongues. Used to fit tongue and groove joints in laminate planks. Large plastic handle for quick and easy placement.
Order No. Description Weight 563 Tapping Block 9 oz.
No. 569
No. 565
No. 566
No. 564
No. 562
No. 563
No. 558 Staple Set ToolThis set tool can manually drive hardwood staples and L-shaped cleats after misfires, in tight places where air guns can’t fit, and is quick for repair jobs. The relieved nose and thin hardened tip finish the fastener flush into the side of the plank. Compact design works close up to walls. Durable hardened steel construction, with tough polyurethane grip / hand guard.Order No. Description Weight 558 Staple Set Tool 1.5 lbs.
No. 560 “Knuckle Head” Pull BarThis new pull bar features a boxed “knuckle” hammer-ing head that is welded to the body. The width has been increased to reduce body bending, and the length is in-creased for more working room at the wall. This bar is built to last even after the heaviest hammering.Order No. Description Weight 560 "Knuckle Head" Pull Bar 3.25 lbs.
No. 585 Laminate CutterA fast and powerful cutter for square end cuts! The long curved cutting edge sharply breaks the plank with mas-sive, highly concentrated pressure. Cuts planks up to 8" wide and .40" thick, without damaging the face. Elimi-nates dust and expensive saw blades! Includes plank support. These cutters will not make diagonal cuts.Order No. Description Weight 585 Laminate Cutter 15 lbs. 13 oz.
No. 685 Mega Laminate CutterThe larger Mega Laminate Cutter (No.685) can cut either 8" or 11" planks with its adjustable platform and larger le-ver arm. Also comes with a galvanized metal tray to catch dust and splinters. These cutters will not make diagonal cuts.Order No. Description Weight 685 Mega Laminate Cutter 31 lbs.
No. 592 Ratchet Spacers (2)These powerful spacers can easily reposition several rows of planks. All steel ratchet mechanism with heavy duty felt pads for the floor and wall. Sold in a set of two.Order No. Description Weight 592 Ratchet Spacers 14 oz.
No. 568 Laminate Tool KitWe’ve bundled the basic tools needed to install laminate floors in a kit and priced it to save you money. Comes with four of our popular strap clamps, four variable wall spacers, two suction floor vises, pull bar, tapping block and twenty plastic spacers. Comes with structural foam tool box.Order No. Description Weight 568 Laminate Tool Kit 28.36 lbs.
No. 585
No. 585
BOXED & WELDED HAMMERING HEAD
MANUALLY DRIVES STAPLES & CLEATS
PATENT PENDING
No. 685
RATCHET SPACERS
No. 685
No. 592
No. 560
No. 558
No. 568
Metal Mitre Tools“Click” and it’s mitered! Metal Mitre tools make 90° tri an-gu lar cuts in alu mi num cap metals, allowing you to create corners without a miter box. The 8-to-1 le ver age and all-steel con struc tion of these tools make for easy cut ting and long useful life.
Choose No. 849 Handle and Die Set Combo for most vinyl and carpet cap with at least a 3/32" opening. Choose the No. 851 Handle and Die Set Combo for vinyl and laminate cap metal with at least a 1/16" opening. Choose No. 847 Com bo with extra-thick heavy duty punch for mitering oth er heavi er cap (such as wallboard cap). Nos. 846, 848 & 850 die sets are in ter change able and sold sep a rate ly.
The No. 870 Combo is used to notch vinyl moul d ings for tight radius bends with out wrinkles. It cuts out a 1/4" wide relief slot with 90° side angles. Sold as a combo die set and handle only. Durably constructed with heavy-duty punch.Order No. Description Punch Thick ness Weight 845 M50 M/M Handle - - - 11/2 lbs. 846 M900 Die Set .135" 8 oz. 847 M50900 Combo .135" 2 lbs. 848 M900GS Die Set .090" 8 oz. 849 M50900GS Combo .090" 2 lbs. 850 M900GSS Die Set .050" 8 oz. 851 M50900GSS Combo .050" 2 lbs. 870 Vinyl Notcher .156" 2 lbs.
No. 368 Deluxe Hacksaw & BladesThis sturdy, gleaming, nickel-plated steel frame is fully ad-just able for 10" or 12" blades. The frame has a contoured plastic hand grip. Blade included.Order No. Description Weight 368 Deluxe Hacksaw Frame 2 lbs. 369 12" Blade, 32T (Card of 2) 1 oz.
No. 176 Carpet Layer’s Miter BoxDesigned for carpet installers, this box is small and com-pact in size. All needed angles are in clud ed. The nickel-plated steel saw guides are absolutely accurate and case-hard ened to pre vent wear. A hardwood block bottom al lows clean cuts through with out dulling the hack saw. Now equipped with nonslip non-marring pads on bottom.Order No. Description Weight 176 Carpet Layer’s Miter Box 3 lbs.
No. 855 Wood MiterThis tool is helpful for making fast 45º cuts in a quarter round. The sharp, heavy-duty blade is replaceable.Order No. Description Weight 855 Wood Miter 14 oz. 856 Wood Miter Replacement Blade 1 oz.
No. 880 Vinyl Miter & BladesThis miter tool features a replaceable 23/8" long razor-sharp blade, for easy cut ting on vinyl or wood mouldings, straight or at a 45° angle. Features 4-to-1 leverage, nick-el-plated steel parts, and cushioned nonslip grips.Order No. Description Weight 880 Vinyl Miter 1 lb. 881 Replacement Blades (3) 1 oz.
No. 543 Aviation Type SnipsThese compound leverage metal snips feature tough al-loy steel blades for long use ful life. Pos i tive-lock contour han dles are vinyl-coated for comfort.Order No. Description Weight 543 Aviation Snips 9 oz.
No. 352 Crain Brad PusherA handy tool for tile and linoleum installers for driving brads into rubber cove or light aluminum metals.Order No. Description Weight 352 Brad Pusher 2 oz.
No. 851
No. 870
No. 368
No. 369
No. 176
No. 880
No. 543
No. 352
No. 855NEW!
RELIEF CUT
INSIDE CORNER
OUTSIDE CORNER
No. 338 Flex Undercut SawThe long flexible blade of this saw bends at the floor for undercutting, while the longer handle delivers greater force. Both sides of the blade have a double row of stag-gered ultra-fine induction-hardened teeth for easy starts and smooth cutting. Blades are replaceable with the touch of a button.Order No. Description Weight 338 Flex Undercut Saw 11 oz. 339 Flex Undercut Saw Repl. Blade 4.5 oz
No. 336 Undercut Saw & BladesThis saw features a trapezoid-shaped high-carbon re-place able steel blade, with 10-point saw teeth on both sides of its 12" length. Perfect for undercutting door jambs and other obstacles to eliminate tight fits.Order No. Description Weight 335 Replacement Blade 8 oz. 336 Undercut Saw 1 lb.
No. 157 Crain Moulding LifterDesigned for maximum prying leverage. Slim ends are smooth and broad to fit behind baseboards and mould-ings with out damage. Both ends notched for pull ing nails. Forged and hard ened for du ra bil i ty, then nickel-plated.Order No. Description Weight 157 Crain Moulding Lifter 8 oz.
No. 159 Vaughan SuperbarThe Vaughan Superbar features a “shephard’s crook” rock ing head for max i mum pry ing pow er. Three bev eled nail slots with polished, sharp blades allow for easy in ser-tion. Don’t settle for im i ta tions! Made in the USA.Order No. Description Length Weight 159 Vaughan Superbar 15" 24 oz.
Nos. 100, 125, 135 Chalk Lines & ChalkWe handle only the best in 100' chalk lines. All lock for use as plumb bob. No. 100 Starrett features flush folding han dle and large chalk res er voir. No. 125 Irwin features easy slid-ing chalk door and tough alu mi num construction. No. 135 Keson features 3-way gear ing for fast retrieval. Refill with 080 and 085 Chalk. *Add “B” to Order No. for blue chalk.Order No. Description Weight 100 Starett Chalk Line 8 oz. 125 Irwin Chalk Line 8 oz. 135 Keson Chalk Box 8 oz. 080* Chalk Bottle 8 oz. 085 Chalk Bottle 5 lbs.
No. 684 Extension CordsHeavy-duty weather-proof vinyl construction with 3-phase ground ed 16 gauge wire, and molded plug and con nec tor.Order No. Description Max. Amp. Weight 684 25 ft. Extension Cord 13 2 lbs.
No. 054 Push Broom & Han dlesThe No. 054 Push Broom is made with a horse hair blend border and black Tampico center. Good all-around broom for wood, terrazzo, and smooth concrete floors. 18" wide block with 3" bristles, handle included.Order No. Description Weight 054 18" Push Broom & Handle 3 lbs. 057 Metal-Tipped Replacement Handle 1 lb.
No. 337 Duster BrushThis brush is handy for cleaning-out corners and other small, hard-to-reach areas. It is made from long-lasting blend ed horse hair. Each strand is securely fastened into the con toured hard wood handle. Size 21/2" x 14" overall, 8" blade.Order No. Description Weight 337 Duster Brush 1 lb.
No. 666 Dust PanThis dust pan is made from one piece of rugged 20 gauge steel with a baked-on enamel finish. Corrugated ribs add stiff-ness. Lip is 12" wide with a beveled edge for easy pick up.Order No. Description Weight 666 Dust Pan 111/2 lbs
No. 336
No. 159
No. 085
No. 684
No. 337
No. 666
No. 080
No. 135No. 125No. 100
No. 157
No. 338
both sides
No. 057METAL-TIPPED HANDEL
No. 054HORSEHAIR/TAMPICO
No. 015 No. 016
No. 018
No. 114
No. 024
ROLLS LEVELRECESSED TRAY BOTTOM VENTS HEAT AND STEAM
UP TO 800 LB. LOADS RIDE ON A CUSHION OF AIR!UP TO 800 LB. LOADS RIDE ON A CUSHION OF AIR!
No. 056
No. 017
No. 280
No. 280 H.D. Air LifterJust slide the wide footplates under the load, turn on the blower, and the load is lifted. You can move the load lit er-al ly with the touch of a fingertip!
The Air Lifter system speeds-up appliance removal and in-stal la tion, saving you time and reducing the risk of back in-juries and of dam ag ing new floors. The Air Lifter includes: 2 appliance movers, T-Connector, 3 hoses & strap, carry-ing bags, 2 H.P. blower, and carpet slider adapter kit.Order No. Capacity Motor H.P. Amps Volts Wt. 280 Up to 800 lbs. 2 7.5 120 30 lbs.
No. 015 & 016 Vinyl DolliesThese dollies are great for in-store and job uses. Stur di-ly con struct ed, with double ball bear ing, heavy-gauge rollers, cast alu mi num frames, and non-mark ing rubber wheels. Ac com mo date rolls to 16" diameter. Available in two siz es.Order No. Size Weight 015 18" Dolly 13 Ibs. 016 36" Dolly 21 Ibs.
No. 017 Metal Skat SkatesOur improved Skat Skates feature all-steel construction for increased load-handling ca pac i ty. The soft urethane cast ers won’t scratch or mar floors. Load pads have heavy-duty vinyl covers, and are re place able. Great for mov ing fur ni ture and ap pli anc es! Order No. Pad Size Closed Open Ca pac i ty Set Wt. 017 8" X 10" 24" 32" 1,000 lbs. 20 lbs.
No. 018 Tile DollyThe Crain tile dolly has a rugged 11" x 16" deck and five heavy-duty casters. Rolls and turns easily with up to five boxes of tile or approx. 300 lbs. The solid plastic wheels are attached to hardened swivel bracketry tough enough to withstand drops from tile boxes. Ergonomic handle ex-tends beyond the box platform area for pulling. An excel-lent value!Order No. Deck Size Ca pac i ty Weight 018 11" X 16" 300 lbs. 3.75 lbs.
No. 114 Folding Carpet Cart (Patent #5,181,731)
This full-sized heavy-duty cart supports and carries full or partial rolls, without the bending of the roll which is usual for small carts. The unique design folds to half-size for convenient storage and takes less space on trucks. With 16" pneumatic tires, one man can move heavy rolls over curbs, down steps, and across gravel drives. A spring keeps the cart open while in use. Durably con struct ed. Ex pand ed size: length 40", width 22", height 16"; ca pac i ty 1,000 lbs.Order No. Description Weight 114 Folding Carpet Cart 38 lbs.
No. 056 Tile Polishing BrushClean tile in seconds with this specially de signed re-us able brush. Sponge down your grouted tile and let the film dry. Just brush over the tile and let the brush clean and polish the tile. This replaces the cheesecloth rag method.Order No. Description Weight 056 Tile Brush 8 oz.
No. 024 Rolling 24" Tool BoxThis fully featured yet lightweight 24" toolbox is made from advanced “structural foam” materials. The thick walls are very durable but without all the weight. Rolls level with the floor thanks to a top mounted pull handle. The tray has a series of angled recesses which allow steam to escape but keep even pressure on the seam. Flush mount side handles allow easy lifting. Order No. Length Width Height Weight 024 24" 101/2" 111/4" 16 lbs.
No. 197Plain Neoprene
No. 198
No. 200
No. 199
No. 401No. 225
No. 226
No. 455
No. 223
No. 224
No. 206
No. 197 “Comfort Knees” Knee PadsNo. 199 Polyurethane Skin Comfort KneesThis all new knee-pad design has built-in protection for both kneeling and knee-kicking, so they stay on at all times. The extra-wide Velcro® straps won’t pinch your legs, even if you are wearing shorts. The black No. 199 Comfort Knees have a thin bonded polyurethane skin on their kneeling surfaces that makes them more durable. Both models are fabricated from flexible, yet highly dura-ble neoprene material that is also machine-washable. The best available knee pad for carpet installers.Order No. Description Weight 197 “Comfort Knees” Knee Pads 1 lb/set 199 Polyurethane Skin “Comfort Knees” 1 lb/set
No. 198 Knee Pad SetMade of closed-cell sponge rubber to be flexible, yet dura-ble. Can be worn comfortably, whether kneeling or stand-ing. Fea tures 1/2" straps and buck les. Order No. Description Weight 198 Knee Pad Set 1 lb/set
No. 200 Elastic Strap Knee Pad SetMolded of 1/2" thick closed-cell sponge rubber, these pads fea-ture heavy-duty 11/2" wide elas tic straps that flex with move-ment, without pinching. Equipped with Velcro® fas ten ers. Order No. Description Weight 200 Elastic Strap Knee Pad Set 1 lb/set
No. 206 Leather Knee Pad SetThese heavy-duty leather pads are durably constructed to last and last. Lined with a thick felt pad that’s riveted to the leather, they come with heavy-duty straps and buckles.Order No. Description Weight 206 Leather Knee Pad Set 13/4 lbs./set
No. 401 6-in-1 ScrewdriverDurably constructed with a non-slip brown plastic handle. Two phillips and two slotted screwdriver tips are housed in the handle. A truly ver sa tile tool! (Replacement tips are not avail able). Made in the U.S.A.Order No. Description Weight 401 6-in-1 Screwdriver 5 oz.
No. 223 & 224 Solid Carbide Drill BitsNo. 225 & 226 AdaptorsThese solid carbide drill bits are available in 1/8" and 3/16" sizes with adaptors available to fit your 1700 to 3500 r.p.m. electric drill. Both have two usable tips.Order No. Description Weight 223 1/8" Solid Carbide Drill 2 oz./doz. 224 3/16" Solid Carbide Drill 4 oz./doz. 225 1/8" Hexagon Adapter 2 oz. 226 3/16" Hexagon Adapter 2 oz.
No. 455 Strip Saver BagThis heavy-duty cloth bag slips over standard 4 ft. long strip boxes. It prevents bursting of boxes and looks pro-fessional on the job. Reinforced end panel, heavy-duty zipper, and double-stitched handle for a long, useful life.Order No. Description Weight 455 Strip Saver Bag 11/2 lbs.
Polyurethane Skin!
Comfort Knees™ Knee Pads
No. 219
No. 434
No. 220
No. 221
No. 470
Nos. 840
Nos. 420-431
MASONRYDRILL BITS
No. 434 - 4" x 14" Finishing TrowelSized 4" wide by 14" long for spreading patch smooth. Features an aluminum mount and a contoured wood han-dle. Professional quality.Order No. Description Weight 434 Finishing Trowel 14 oz.
Professional Notched TrowelsNo. 420-431 Professional Notched TrowelsStocked in both right and left-handed models, the flooring trowels No. 420, 421, 422, 424, 430 and 431 have a 10° bev eled front edge for clearance when spreading close to the walls. The wall trowels No. 423, 425, 426, 427, 428 and 429 have a square front edge. All models feature curved hardwood handles and blades made of hard ened spring steel. Mark an “L” after the number for ordering left hand-ed models. Trowels marked with an asterisk (*) are not available in left hand models. Notch PatternOrder No. Open Flat Depth Weight 420 1/16" X 1/16" X 1/16" 1 lb. 421 1/16" X 1/4" X 1/16" 1 lb. 422 1/16" X 1/32" X 1/32" 1 lb. 423 1/8" X 1/16" X 1/8" 1 lb. 424 3/32" X 3/32" X 3/32" 1 lb. 425 1/4" X - - - X 3/16" 1 lb. 426 1/4" X 1/4" X 1/4" 1 lb. 427 1/2" X - - - X 1/2" 1 lb. 428* 1/4" X 1/4" X 3/8" 1 lb. 429 1/2" X 1/2" X 1/2" 1 lb. 430* 1/8" X 1/16" X 1/8" (u) 1 lb. 431* 1/16" X 1/16" X 1/16" (v) 1 lb.
No. 840 Trowel NotcherAn easy and inexpensive way to add life to adhesive trow els. One squeeze of the handles cuts a sharp, precise notch. A trowel can be renotched in minutes. Rug ged ly made.Order. Notch NotchNo Description Width Depth Weight 840 Trowel Notcher 1/8" 1/16" 1 lb.
Masonry Drill BitsThese spiral-fluted, carbide-tipped bits cut rapidly in con-crete, terrazzo, marble, slate, or ceramic floors. The tung-sten carbide tips stay sharp during rotary or per cus sion drill ing.Order No. Description Weight 219 1/8" Drill Bits 1/2 oz. 220 3/16" Drill Bits 1/2 oz. 221 1/4" Drill Bits 1/2 oz.
No. 470 Glue BottleThis 16 oz. bottle is made from high-impact plastic and features an adjustable depth brush that goes to the bot-tom. Seals tight to prevent hardening in storage.Order No. Description Weight 470 Glue Bottle 21/3 lbs.
No. 660 Handy FileAn 8-inch fine file with a handle for finishing lam i nate edg-es. One edge is “cut” and the other is “safe” for corners.Order No. Description Weight 660 Handy File 5 oz.
No. 344 Score Tool & No. 345 Double BladeThe handle contour provides positive grip and the proper blade angle to the laminate. The double-ended ce ment ed 94 Rockwell carbide-tipped blade is reversible. Scores a line on plastic laminates to al low an easy break.Order No. Description Weight 344 Score Tool 3 oz. 345 Double Blade 1 oz.
No. 660
No. 344
No. 358
No. 511
No. 356
No. 353Y
No. 353
No. 0467/8" CARBIDE WHEEL
No. 4001/2" CARBIDE WHEEL
No. 038 - 3"
No. 040 - 3"
No. 039 - 4"
No. 041 - 4"
No. 104
No. 038 & 039 Economy Notched Spread ersA great value and quality-made, these spreaders have polished spring-steel blades. They are deep “V” notched 1/8" wide and 1/8" deep - - perfect for spreading topset base or for general use. Made in the U.S.A.Order No. Description Notch Weight 038 3" Economy Spreader 1/8" x 1/8" 3 oz. 039 4" Economy Spreader 1/8" x 1/8" 3 oz.
No. 040 & 041 Notched SpreadersThe 040 & 041 spreaders are of excellent quality polished stainless steel. Great for those hard-to-get-at areas when applying mastics. The notches are 1/8" wide and cut to a V point 1/8" deep. The 040 has a 3" wide blade - the 041 has a 4" wide blade.Order No. Description Notch Weight 040 3" Notched Spreader 1/8" x 1/8" 2 oz. 041 4" Notched Spreader 1/8" x 1/8" 2 oz.
No. 104 Flexible Joint KnifeThe No. 104 is a perfect tool for subfloor patching and re-pair work. The 31/2" wide, mirror-finished, tempered steel blade wipes clean easily. The beveled edge allows clear-ance when used in corners.Order No. Description Weight 104 Flexible Joint Knife 2 oz.
No. 358 Notched SpatulaEspecially designed for cove base spreading, mosaic work, and spreading in cramped areas. This tool features a large notched steel blade, and a rigid plastic handle.Order No. Description Weight 358 Notched Spatula 2 oz.
No. 511 Lid LifterIt’s easy to use -- just hook over the lid’s edge and lift! Prevents spillage, broken fingernails, and wasted time. Made of extruded aluminum in a one-piece con struc tion. Order No. Description Weight 511 Lid Lifter 2 oz.
No. 356 Carbide Hole SawThe Crain tungsten carbide-tipped hole saw is a great per-form er. Now you can cut clean holes fast for faucet and shower-head pipes. The tungsten carbide edges cut a 13/8" hole. The replaceable 1/4" masonry bit allows the cut ter to hold a beautiful circle cut and the spring within the cutter ejects the piece cut out. An ex cel lent tool that works well on both ceramic and soft-bodied quarry tile.Order No. Description Weight 356 Crain Ceramic Hole Saw 10 oz.
No. 353 Carbide Grout SawThis handy little tool will save you time and clean-up tak-ing out old hardened grout. The sharp-pointed, carbide-coat ed blade cuts and gouges out old grout in a hurry.Order No. Description Weight 353 Grout Saw (with 2 blades) 4 oz. 353Y Set of 2 Replacement Blades 1/2 oz.
Scoring Wheels for Crain Tile CuttersThe No. 400 Scoring Wheel Assembly comes with screws and is for use with discontinued Crain No. 030, No. 031, No. 032X, and No. 033X cutters. The No. 046 Carbide Wheel only is for the No. 045 cutter only!Order No. Description Package 046 7/8" Carbide Wheel 1 400 1/2" Carbide Wheel 1
WA
RD
STA
ND
AR
D
L
2.35
W
.4
80
T .0
25
PK
12
W
T 1.
1 oz
.
LO
NG
PO
INT
B
LAD
ES
L
2.42
5
W
.530
T
.050
P
K
2
WT
.04
lb.
D
OU
BLE
ED
GE
B
LAD
ES
L
1.70
W
.8
75
T .0
07
PK
12
W
T 1
oz.
LO
OP
PIL
E
CU
TTE
R B
LAD
ES
L
2.31
W
.7
5
T .0
25
PK
10
W
T 2
oz.
FL
OO
R
STR
IPP
ER
BLA
DE
S
L 4.
00
W
.560
T
.020
P
K
100
W
T 1.
2 lb
s.
CR
AIN
UTI
LITY
B
LAD
ES
L
2.00
W
.7
5
T .0
16
PK
25
W
T 3
oz.
W
AR
D H
EA
VY
L
2.68
W
.7
36
T .0
25
PK
12
W
T 1.
7 oz
.
V-
HO
OK
BLA
DE
S
L
1.94
W
.7
45
T .0
25
PK
5
W
T .0
6 lb
.
DO
UB
LE E
DG
E
BLA
DE
S
L
1.70
W
.8
75
T .0
07
PK
10
0
WT
5.5
oz.
S
LOTT
ED
RA
ZO
R
BLA
DE
S
L
2.25
W
.7
5
T .0
15
PK
5
W
T 1
oz.
B
IG S
CR
AP
ER
B
LAD
ES
L
8.00
W
.7
50
T .0
37
PK
3
W
T 4
oz.
H
EA
VY-
DU
TY
UTI
LITY
BLA
DE
S
L
2.40
W
.7
5
T .0
25
PK
25
W
T 4
oz.
A
IRW
AY
STR
AIG
HT
L
2.12
5
W
.495
T
.025
P
K
12
WT
1 oz
.
H
.D. S
TRA
IGH
T
L
2.34
W
.7
45
T .0
25
PK
5
W
T .0
5 lb
.
DE
LUX
E S
CR
AP
ER
B
LAD
ES
L
7.50
W
2.
00
T .0
90
PK
12
W
T 6
oz.
SO
LD B
YE
AC
H B
LAD
E
S
LOTT
ED
R
AZ
OR
BLA
DE
S
L
2.25
W
.7
5
T .0
15
PK
10
0
WT
10 o
z.
B
IG S
CR
AP
ER
B
LAD
ES
L
8.00
W
.7
50
T .0
37
PK
9
W
T 9
oz.
R
EP
LAC
EM
EN
T
BLA
DE
S
L
2.4
W
.7
5
T .0
40
PK
3
W
T 1
oz.
AIR
WAY
HO
OK
L
2.11
0
W
.510
T
.025
P
K
12
WT
1 oz
.
H.D
. STR
AIG
HT
L
2.34
W
.7
45
T .0
25
PK
10
0
WT
.83
lb.
DE
LUX
E S
CR
AP
ER
B
LAD
ES
L
7.50
W
3.
00
T .0
91
PK
12
W
T 10
oz.
SO
LD B
YE
AC
H B
LAD
E
S
LOTT
ED
R
AZ
OR
BLA
DE
S
L
2.25
W
.7
5
T .0
15
PK
50
W
T 4
oz.
5"
SC
RA
PE
R
BLA
DE
S
L
5.00
W
.7
50
T .0
37
PK
10
W
T 7
oz.
R
EP
LAC
EM
EN
T
BLA
DE
S
L
1.17
5
W
.400
T
.020
P
K
10
WT
.6 o
z.
X
752
1/2
D L
INO
L
4.32
W
2.
25
T .0
58
PK
12
W
T .7
oz.
SO
LD B
YE
AC
H B
LAD
E
U
NIV
ER
SA
L
TRIM
ME
R B
LAD
E
L
2.18
W
.7
5
T .0
17
PK
12
W
T 1
oz.
HE
AV
Y D
UTY
U
TILI
TY B
LAD
ES
L
2.40
W
.7
5
T .0
25
PK
10
0
WT
1 lb
.
H
.D. R
OU
ND
E
DG
E B
LAD
ES
L
2.25
W
.7
5
T .0
17
PK
10
0
WT
12 o
z.
S
TRIP
CU
TTE
R
BLA
DE
S
L
1.87
W
.4
8
T .0
40
PK
12
W
T 1
oz.
HO
OK
BLA
DE
L
2.0
W
.7
35
T .0
25
PK
15
W
T 2
oz.
P
ER
SO
NN
A D
EE
P
HO
OK
L
2.0
W
.7
50
T .0
25
PK
10
W
T 2
oz.
V
X75
2 1/
2 D
V
INY
L
L
4.33
W
2.
20
T .0
66
PK
12
W
T .7
oz.
SO
LD B
YE
AC
H B
LAD
E
U
NIV
ER
SA
L
TRIM
ME
R B
LAD
E
L
2.18
W
.7
5
T .0
17
PK
25
W
T 2.
3 oz
.
HE
AV
Y D
UTY
U
TILI
TY B
LAD
ES
L
2.40
W
.7
5
T .0
25
PK
10
0
WT
15 o
z.
H.D
. SQ
UA
RE
E
DG
E B
LAD
ES
L
2.25
W
.7
5
T .0
17
PK
10
0
WT
12 o
z.
STR
IP C
UTT
ER
B
LAD
ES
L
1.87
W
.4
8
T .0
40
PK
25
W
T 3
oz.
INS
TAN
T
RE
PAIR
BLA
DE
S
L
1.03
5
W
.500
T
.020
P
K
4
WT
.2 o
z.
X
2AD
SH
OR
T
L
4.27
5
W
1.87
0
T .0
66
PK
12
W
T .7
oz.
SO
LD B
YE
AC
H B
LAD
E
U
NIV
ER
SA
L
TRIM
ME
R B
LAD
E
L
2.18
W
.7
5
T .0
17
PK
10
0
WT
11 o
z.
TO
P C
UTT
ER
B
LAD
ES
L
3.0
W
.7
45
T .0
25
PK
10
W
T 3
oz.
FL
OO
R S
TRIP
PE
R
BLA
DE
S
L
4.00
W
.5
60
T .0
20
PK
10
W
T 2
oz.
23"
SE
AM
MAT
E
L
23.2
7
W
.560
T
.020
P
K
3
WT
.30
lb.
DISP. PACK
005
006
066
070
124
174
189
191
205
217
245
246
247
265
297
298
300
301
302
303
304
305
350
360
375
375S
390
450
523
720
725
726
727
728
730
735
880
012
013
025A
026
A
061
064
067
071
072
073C
306X
1174
-A
292C
295
C 62
1X 6
22X
996X
997
306(
CX) 3
08C
309C
184(
CX)
306(
CX) 3
08C
309C
184(
CX)
184(
CX)
306(
CX) 3
08C
309C
996
X 99
7
292C
295
C 62
2X 9
96X
300Y
299Y
300Y
306
(CX)
308
C 30
9C
306(
CX) 3
08C
306(
CX) 3
08C
309C
306(
CX) 3
08C
309C
292C
295
C 30
0Y 3
08C
306(
CX)
351
351C
351
351C
376
377
376
377
391
451(
X)
523Y
306(
CX) 3
08C
309C
306(
CX) 3
08C
309C
306(
CX) 3
08C
309C
292C
295
C 62
1X 6
22X
996X
997
292C
295
C 62
1X 6
22X
996X
997
292C
295
C 62
1X 6
22X
996X
997
306(
CX) 3
08C
309C
881
AAdhesive Syringe ..................... 22Aluminum Drives ..................... 13Appliance Movers: Air Lifter .... 31Awls, Carpet ............................ 10
BBase, Vinyl Base Tools ............ 18Blades: Airway................................... 24 Bearcat Stripper Machine .. .19 Dexter ................................... 24 Knife .................. 15, 16, 24, 34 Usage Table ......................... 35 Razor Blades, Re place able . 35 Scraper ........................... 20, 35 Seammate ............................ 35 Saws ....................... 1, 2, 18, 30 Diamond ....................... 1, 2, 35 Trimmer .......................... 10, 35 Vinyl Groover.................. 25, 26 Ward ..................................... 24 Other ...........(Look Under Tool) Blocks: Tapping, Laminate ...... 27Bottles: Carpet Seam Sealer .............. 9 Vinyl Sealer .......................... 26Brad Pusher ............................. 29Brooms ..................................... 30Brushes .............................. 30, 31
CCarpet: Awls ...................................... 10 Cart ....................................... 31 Clamp ................................... 20 Knives ............................. 15, 16 Seam Rollers .......................... 9 Seaming Irons ...................... 12 Seam Steamer ..................... 12 Stretchers ....................... 3, 4, 5 Tractor .................................... 9 Trimmers .............................. 10 Tucker ................................... 10 Chalk Line Reels & Chalk .... 30Ceramic Grout Saw ................. 34Ceramic Hole Saw ................... 34Clamps, Laminate Plank ......... 27Clear Can ................................. 13Combination Straight Edges ..... 8Cookie Cutter ........................... 17Corner Support, Stretcher......... 5Corners: Metal for Coves (TrimLine) .. 21Cove, Inside Corner Kit ........... 23Cove Base Gun & Nozzles ...... 18Cutters: Carpet Seaming ..................... 7 Laminate .............................. 28 Vinyl Tile ............................... 21Cutting Wheels, Tile ................ 34
DDividers .................................... 21Dollies: Skat Skate ............................ 31 Tile Dolly............................... 31 Vinyl Dolly............................. 31Door Pin Tools ......................... 13Drill Bits: Masonry ............................... 33
Solid Carbide ....................... 32 Solid Carbide Adapter ......... 32Drives, Aluminum .................... 13Driving Bar ............................... 13Dust Pan & Brushes ................ 30
EElectric Staplers ...................... 14Extension Cords ...................... 30
Files, Laminate ........................ 33Flexible Joint Knife .................. 34Floor Scrapers, Hand .............. 20Floor Stripper, Power (Bearcat) 19Floor Vise, Laminate ................ 27
GGoggles, Safety ....................... 14Glue: Bottle ................................ 9, 33 Hot Melt Guns & Sticks ....... 16 Spreaders ....................... 33, 34Groovers, Vinyl .................. 25, 26Grout Saw & Blades ................ 34
HHacksaw & Blades ................... 29Half Hatchet ............................. 13Hammers .................................. 13Hardwood Tools ................. 27, 28Heat Blo Guns ......................... 26Heat Bond Irons & Kits ............ 12Heat Weld Gun ........................ 25Hole Saw, Ceramic .................. 34
Inside Corner Saw ................. 1, 2Inside Cove Corner Kit ............ 23Irons, Carpet Seaming ............ 12
JJamb Saws: 812 Super Saw ....................... 1 Hand Undercut Saw ............ 30Jiffytex Seaming Adhesive ........ 9JusPush Cutter ........................ 20
KKnee Kickers .............................. 6Knee Pads ................................ 32Knives: Airway................................... 24 Carpet ............................ 15, 16 Dexter ................................... 24 Hyde ..................................... 16 Pad ....................................... 15 Utility .............................. 16, 24 Vinyl ...................................... 24 Ward ..................................... 24
Laminate: Cutter ................................... 28 Flooring Tools ................ 27, 28 Score Tool ............................ 28 Spacers .......................... 27, 28Lid Lifter ................................... 34Linoleum: Dollies................................... 31 Knives ................................... 24 Rollers .................................. 22
Magnetic Driving Bar ............... 13Magnetic Tack Holder ............. 13Mallets, Rubber ....................... 13Metal Miter Tools ..................... 29Mini Carpet Stretcher ................ 5Miter Box ................................. 29Miter, Wood .............................. 29Mitering Tools .......................... 29Moulding Lifter ........................ 30Multi-Undercut Saw .................. 2
NNeedles: Sewing.................................. 17 Scriber .................................. 23Notcher: Trowel ................................... 33 Vinyl ...................................... 29
Pin Vise .................................... 23Plastic Laminate Tools ............ 28Pouches, Leather Tool ............. 17Power Groover, Vinyl ............... 25Power Stretchers ................... 3, 4Pull Bar, Laminate .................... 28
Repair Tools, Carpet ............ 5, 17Replacement Razor Blades .... 35Resilient: Knives ................................... 24 Rollers .................................. 22 Scribers ................................ 23Rod Saws ................................. 17Rollers: Carpet Seaming ..................... 9 Linoleum (Vinyl, Resilient) ... 22 Plastic Laminate .................. 22Row Separator ........................... 7Rubber Mallet .......................... 13
Safety Glasses ......................... 14Safety Floor, Diamond Blade .. 25Saws: Inside Corner ..................... 1, 2 Jamb ............................ 1, 2, 30 Rod ....................................... 17 Super Saw .............................. 1 Toe-Kick ................................. 2 Undercut ..................... 1, 2, 30Score Tool & Blades ................ 33Screwdriver, 4 in 1 ................... 32Scribers & Needles .................. 23Scrapers, Floor ........................ 20Seam: Cutters .................................... 7 Edge Sealer Bottle, Carpet ... 9 Repair Stretcher ..................... 5 Rollers, Carpet ....................... 9 Sealer Bottles, Vinyl ............. 21 Sealer, Carpet Seam (Latex) .. 9 Steamer, Carpet Seam ........ 12 Squeezer ................................ 9 Tape, Carpet Seam .............. 11Set Tool, Hardwood Staple ..... 28Sharpening Stones & Holder ... 16Shears, Carpet ......................... 16Skiving Knives, Vinyl .......... 25,26Snips ........................................ 29Spacers, Laminate Floor ... 27, 28
Spreader, Adhesive ........... 33, 34Spreader, Carpet ....................... 5Stair Claw ................................. 14Stair Tools ................................ 10Staple Remover ....................... 14Staple Saver Boxes ................. 14Staplers & Staples ................... 14Steamer, Carpet ....................... 12Straight Edges & Squares ......... 8Stretchers: Accessories ....................... 4, 5 Cases ..................................... 4 Corner Support ...................... 5 Power Stretchers ........... 3, 4, 5 Seam Repair .......................... 5 Stairway ................................. 5 Stretcher Tubes..................... 4Strip Cutter, Tackless .............. 13Strip Glue Guns ....................... 16Strip Saver Bag ........................ 32Strippers, Floor, Hand Power .. 20Strippers, Machine (Bearcat) ..19Super Bar ................................. 30Super Saw & Blades .................. 1Syringe, Adhesive .............. 22, 33
TTackless Tools.......................... 13Tacker, Electric ........................ 14Tape, Carpet Seam .................. 11Thread & Thimbles .................. 17Tile Cutters: Resilient/Vinyl ...................... 21Tile Tools: Hole Saw, Ceramic .............. 34 Wheels & Diamond Blades .. 34Toe-Kick Saw ............................. 2Tool Boxes ............................... 31Tool Kit, Carpet ........................ 17Tool Kit, Laminate ................... 28Tool Kit, Vinyl Welding ............. 25Tool Pouches ........................... 17Topset Base Tools ................... 18Torches, Propane Gas ............. 26Trim Line Vinyl Corners ........... 21Trimmers, Carpet ..................... 10Trowel Notchers ....................... 33Trowels ............................... 33, 34Turning Tool ............................. 10
UUndercut Saws ................ 1, 2, 30Utility Knives ...................... 16, 24
V - ZViewtainer ................................ 13Vinyl: Knives ................................... 24 Miter ..................................... 29 Rollers .................................. 22 Sealer Bottle ........................ 26 Tile Box Grabber .................. 21 Tile Cutters ........................... 21 Welding Tools................. 25, 26Wood Miter .............................. 29“Z” Bar Trimmer ....................... 10
Floor Covering Tools Catalog - Table of Contents