Pre Mix Plasters are factory manufactured dry mortars
conforming to specific mix proportions of ingredients
Binders
Aggregates
Fillers
Pigments
Chemical additives
etc.
• Easy handling
• Less different components
• Low wastage
• Save man hours
• Quality assurance
• Save space at site
• Automation of plaster works
• Achieve special properties
“Just add water”“Consistency”
“Cost Effective”“Improves Productivity”“Standard Quality”“No Mess”
“More Efficiency”“Salt & Water Resistance etc.”
FUNCTIONAL PRODUCTS ADDITIVES
PRE MIX PLASTER
•Plastering and decoration of walls
•Plastering and decoration of ceilings
•Floor leveling
•Setting and grouting of tiles
•Laying and grouting of bricks/blocks
•Rendering of facades
•Bonding strength
•Pot life
•Open time
•Workability and Spray ability
•Elasticity and plasticity
•Setting time
Bonding Rush Coat
Bonding Rush Coat
Sand Cement Render
Cement Plaster/Render
Cement Plaster/Render
Cement Plaster
Cement Plaster
Bonding Rush Coat
No more hacking…
Sand Cement Render
High quality cement lime plaster…
Cement Plaster/Render
Plastering solution for normal and aerated blocks…
Cement Plaster
Mono coat cement plaster…
Mineral based bonding coat on smooth walls and ceilings.
Dry pre mix cement lime plaster for internal and external use.
Dry pre mix plaster/render for internal and external use.
Single coat plaster/render for internal and external use.
Gypsum Lime Plaster
Ideal internal plaster…
Gypsum Lime Veneer Plaster
For flawless finish…
Gypsum Lime Plaster
Thin coat for aerated blocks…
Dry premix gypsum lime plaster for internal use.
Single coat internal plaster for veneer fair faced finish.
Dry pre mix gypsum based light weight plaster.
Roll Easy
Roller applied decorative finish…
Conwave
Medium textured decorative finish…
Concoat
Fine Textured decorative finish…
Dry pre mix heavy or light textured finishing coat.
Applied with special trowel for a classic texture.
Different fine textures possible with spray gun or trowel.
Conglaze
Spray textured decorative finish…
Tyrolean textured finish…
Ultimate sparkling finish…
Heavy texture can be obtained using a special technique.
Classical spray finish applied by spray gun or tyrolean box.
Dry pre mix decorative finish for internal and external use;
gives a sparkling effect due to incorporated glass, silica sand
and marble chips. These aggregates remain exposed on the
surface by using a special application technique. It offers
impressive appearance and high weather resistance.
Stone finish decorative render…
Sand Cement Render
Traditional Arabic plaster…
Conmix Heritage Plaster
Heritage finish…
Pre mixed pigmented single coat material for internal and
external use, that can be applied on the block work. It is available
in three exciting textures; scratch coat can be made available in
a range of colours to meet customer requirements.
Pre mixed pigmented single coat plaster to match the appearance
for traditional Arabian houses and forts. Ideal for internal and
external use, that can be applied on the block work. Available in a
range of colours.
Decorative plaster designed to match the appearance of
traditional Arabian houses and forts combined with the
characteristics of modern building materials.
Acoustic Plaster
Stop the echo…
Insulation Plaster
For thermal insulation…
Adhesive for EIFS…
Tyrolean spray applied acoustic plaster for internal use on
ceilings, soffits and upper parts of walls.
Cement based dry pre mix plaster for internal / external
application to provide thermal insulation of walls.
Thin bed adhesive mortar specially formulated for gluing
organic insulation boards against inorganic materials.
Skim Coat Plaster
Dressing Plaster
Conmix Floor Screed
Block Laying Mortar
Fitting Plaster
Light Weight Block Mortar
Dry Pre Mix Concrete
Flooring made easy…
Prelude to paint…
Factory mixed mortar…
Ready to use floor screed for leveling substrates.
Smooth finish leveling compound.
Block laying mortar for concrete and light weight
aerated blocks.
Fairing Coat…Dry pre mix mortar for local repair and leveling.
Rapid setting fixing mortar…Fixing plaster stops, corner beads, etc.
PVA based emulsion primer and sealer having
excellent penetrating and sealing properties.
Acrylic co-polymer and silicone emulsion based
primer and sealer having superior penetrating and
sealing properties.
Solvent based pure acrylic primer and sealer having
very good penetrating properties.
Ready to use protective coatings consisting of high quality alkali
resistant cross linked acrylic co-polymer emulsion stabilized by
liquid surfactants. They contain additives to inhibit the growth of
fungi and bacteria. They are available in a range of colours.
Ready to use PVA co-polymer based putty having excellent filling
and leveling properties. It provides a smooth leveled surface free
from undulations prior to the application of paints.
Supplied as a ready to use intermediate elastomeric textured coating. It
consists of high quality alkali resistant cross linked acrylic co-polymer
emulsions, additives and selected processed sand stabilized by liquid
surfactants. It is highly flexible and has ability to accommodate minor
cracks. It can be over-coated with pure acrylic coating, polyurethane or
styrene acrylic emulsion coating.
The above mentioned water based textures are supplied as ready to use
decorative plaster. Available in a wide range of colours, CONTXTRA
textures are suitable for decorating / finishing luxury villas, high rised
buildings, hotels etc.
Two component premium quality acrylic polyurethane topcoat having
exceptional resistance to UV rays, chemicals, solvents and water. It is
available in a range of colours.
Four coat system for civil structures. It adds life to structures by
combining elegant appearance and exceptional protection against
adverse weather conditions. CONTXTRA Tyrosystem, when used in
conjunction with CONTXTRA Tyrothane topcoat, provides anti-
carbonation properties.
RECOMMENDED SYSTEM
1 coat of CONTXTRA Primer/CONTXTRA Universal Primer
1 coat of CONTXTRA Tyro Compound
2 coats of CONTXTRA Tyrothane Matt or Gloss
CONTXTRA Tyro Compound can also be over coated with CONTXTRA Tyroshield Matt/ Gloss.
Hopper Gun
Corner Beads
Triangular Trowel
Corner Trowel
Brick Laying
Trowel
Controlled water cement ratio
Proper mixing time in the machine
More area can be covered in a short time
Less down time due to friendly operation
and fast onsite support system
Plaster machine can be shifted from place
to place very easily. Also it can be easily
dismantled without any difficulties
“Consistent Quality”
“Better Workability”
“Better Output”
“Efficiency”
“Fast Mobilization”
By using a spray pattern
hopper for our BRC/ CRC/
BRC-LGT, very high
productivity and better
quality key coat can be
achieved.
Used for removing of excess
material from the applied areas.
Used for leveling the different types
of plasters.
Used in final finishing stage of SC and ERP
decorative plasters application
Used to achieve different types of final
finishing for SC decorative plaster.
Used for accurate leveling of corner beads
and plaster points prior to plaster
application
Used to achieve sharp corners in plaster
application
STRINGENT QUALITY CONTROL SYSTEMS
REGULAR TESTING OF
IN-COMING RAW MATERIALS &
FINISHED PRODUCTS
ISO 9001 CERTIFIED
INTERNATIONAL STANDARDS
OUR PRODUCTS ARE USED IN
VARIOUS PRESTIGIOUS PROJECTS
OF U.A.E. AND WE EXPORT TO
MORE THAN 30 COUNTRIES
BAHRAIN
BANGLADESH
BURUNDI
CONGO
EGYPT
ETHIOPIA
IRAN
JORDAN
KENYA
KUWAIT
LEBANON
LIBYA
OMAN
INDIA RWANDA
QATAR
SAUDI ARABIA
SRILANKA
SUDAN
SYRIA
TANZANIA
TUNISIA
PAKISTAN
UGANDA
ZAMBIA
YEMEN
NIGERIA
AFGHANISTAN
PHILIPPINES
INDONESIA
MALAWI
IRAQ
SENEGAL