Nokia 6210 Navigator User’s Guidends1.webapps.microsoft.com/files/support/apac/phones/... ·...

vigators Guide

9208673_6210Navigator_en_apac_v1.0_web.fm Page -11 Friday, June 6, 2008 5:57 PM

Copyright © 2008 Nokia. All rights reserved.

Nokia 6210 NaUser’

evelopment. Nokia reserves the right to make f the products described in this document

ED BY APPLICABLE LAW, UNDER NO ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL R CAUSED. ARE PROVIDED “AS IS“. EXCEPT AS REQUIRED ES OF ANY KIND, EITHER EXPRESS OR IMPLIED, HE IMPLIED WARRANTIES OF R A PARTICULAR PURPOSE, ARE MADE IN BILITY OR CONTENTS OF THIS DOCUMENT. ISE THIS DOCUMENT OR WITHDRAW IT AT ANY

ts and applications and services for these check with your Nokia dealer for details, .

s, technology or software subject to export d other countries. Diversion contrary to law is

d with your device may have been created and s not affiliated with or related to Nokia. r intellectual property rights to the third-party t take any responsibility for end-user support, the information in the applications or these y warranty for the third-party applications.CKNOWLEDGE THAT THE APPLICATIONS ARE

TY OF ANY KIND, EXPRESS OR IMPLIED, TO THE PPLICABLE LAW. YOU FURTHER IA NOR ITS AFFILIATES MAKE ANY , EXPRESS OR IMPLIED, INCLUDING BUT NOT

MERCHANTABILITY OR FITNESS FOR A E APPLICATIONS WILL NOT INFRINGE ANY S, TRADEMARKS, OR OTHER RIGHTS.

i



DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-367 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.

© 2008 Nokia. All rights reserved.Nokia, Nokia Connecting People, Navi, Visual Radio and Nokia Care are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

This product includes software licensed from Symbian Software Ltd © 1998-2008. Symbian and Symbian OS are trademarks of Symbian Ltd.

US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2008. Tegic Communications, Inc. All rights reserved.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

Portions of the Nokia Maps software are © 1996-2008 The FreeType Project. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.

Nokia operates a policy of ongoing dchanges and improvements to any owithout prior notice.TO THE MAXIMUM EXTENT PERMITTCIRCUMSTANCES SHALL NOKIA OR ANY LOSS OF DATA OR INCOME OR OR INDIRECT DAMAGES HOWSOEVETHE CONTENTS OF THIS DOCUMENTBY APPLICABLE LAW, NO WARRANTIINCLUDING, BUT NOT LIMITED TO, TMERCHANTABILITY AND FITNESS FORELATION TO THE ACCURACY, RELIANOKIA RESERVES THE RIGHT TO REVTIME WITHOUT PRIOR NOTICE.The availability of particular producproducts may vary by region. Pleaseand availability of language optionsExport controlsThis device may contain commoditielaws and regulations from the US anprohibited.The third-party applications providemay be owned by persons or entitieNokia does not own the copyrights oapplications. As such, Nokia does nofunctionality of the applications, or materials. Nokia does not provide anBY USING THE APPLICATIONS YOU APROVIDED AS IS WITHOUT WARRANMAXIMUM EXTENT PERMITTED BY AACKNOWLEDGE THAT NEITHER NOKREPRESENTATIONS OR WARRANTIESLIMITED TO WARRANTIES OF TITLE, PARTICULAR PURPOSE, OR THAT THTHIRD-PARTY PATENTS, COPYRIGHT

0434

http://www.mpegla.com

http://www.nokia.com/phones/declaration_of_conformity/

http://www.nokia.com/phones/declaration_of_conformity/

..........................................................9

..........................................................9cation..............................................9ations .......................................... 10....................................................... 10....................................................... 10....................................................... 10....................................................... 10) ..................................................... 10....................................................... 11....................................................... 11....................................................... 12....................................................... 12headset........................................ 13ble................................................ 13

.....................................14

....................................................... 14

....................................................... 15

....................................................... 16

....................................................... 17

....................................................... 18

....................................................... 20


ConSafetyAbout yNetworkBattery

SuppoHelp ......Nokia su

Get stInsert a MemoryCharge Switch tAntennaConfiguWelcomSettings

Your dKeys anStandbyIndicato

ii
tents......................................................... viour device ................................................................ vi services ................................................................. viiremoving................................................................ viii

rt ...................................................... ix.................................................................................... ixpport and contact information ........................ ix

arted .................................................1(U)SIM card and battery ...................................... 1 card........................................................................... 2the battery................................................................ 2he device on and off............................................. 3 locations ................................................................. 4ration settings ......................................................... 4e application............................................................ 4 wizard ...................................................................... 5

evice.................................................6d parts ........................................................................ 6 mode......................................................................... 7rs................................................................................. 8

Screen saver...................Menu................................Mark items in an appliSwitch between applicClose an application....Volume control .............Display rotation ............Turning control .............Keypad lock (keyguardRemote lock...................Access codes..................Download! ......................My own ...........................Connect a compatible Connect a USB data ca

Call functions......Make a voice call .........Answer or reject a callVideo calls ......................Call settings...................Video sharing.................Log....................................

.................................................... 31

.................................................... 36

.................................................... 37

...................................38

.................................................... 38

.................................................... 38

.................................................... 38

.................................................... 38

.................................................... 39

.................................................... 39

.................................................... 39

...................................41

.................................................... 41

.................................................... 42es .............................................. 42

...................................43

.................................................... 43

.................................................... 45

.................................................... 47

.................................................... 48

.................................................... 48

.................................................... 48

iii



Write text................................................ 21Traditional and predictive text input.............................21Copy and delete text ..........................................................22

Messaging................................................ 23Write and send messages..................................................23Inbox .......................................................................................24Service messages .................................................................24E-mail .....................................................................................24Outbox ....................................................................................25Message reader ....................................................................25View messages on the SIM card .....................................25Cell broadcast.......................................................................26Service commands ..............................................................26Messaging settings .............................................................26

Contacts................................................... 27Save and manage contact information.........................27Contact groups.....................................................................27Add a ringing tone ..............................................................27

Positioning............................................... 29About GPS..............................................................................29Assisted GPS..........................................................................29Set up GPS connection ......................................................30Position requests .................................................................31

Maps ...................................Landmarks .........................GPS data ............................

Gallery....................Main view..........................Download files .................View images......................Edit images .......................Edit video clips.................Print images......................Share online......................

Camera...................Capture images................Record video clips ...........Capture panoramic imag

Media .....................Music player .....................Nokia Podcasting.............Radio...................................RealPlayer..........................Flash Player.......................Recorder.............................

t ...................................61cations......................................... 61....................................................... 62....................................................... 63....................................................... 64

.....................................66 data............................................ 66....................................................... 66...................................................... 66....................................................... 68n.................................................... 69....................................................... 69....................................................... 70

ments...........................71....................................................... 72set BH-902 ................................. 72....................................................... 72R-97............................................. 72

er information...........73ication guidelines ..................... 74

ance ............................76



Internet.....................................................50Browse the web ...................................................................50Search.....................................................................................52

Personalisation.........................................53Themes....................................................................................53Profiles....................................................................................53

Time management ...................................54Clock........................................................................................54Time and date.......................................................................54Calendar .................................................................................54

Office applications ..................................55Active notes ..........................................................................55Notes.......................................................................................55Calculator ..............................................................................55Converter ...............................................................................55Mobile dictionary ................................................................56Adobe Reader .......................................................................56Quickoffice ............................................................................57

Settings.....................................................58Voice commands..................................................................58Phone settings......................................................................58Speech ....................................................................................60

Data managemenInstall or remove appliFile manager ..................Licences...........................Device manager ............

Connectivity ........Transfer or synchronisePC Suite ..........................Bluetooth connectivityUSB connection ............Remote synchronisatioPush to talk....................Connection manager...

Genuine EnhanceBattery.............................Nokia Bluetooth HeadNokia Car Kit CK-300 .Nokia Mobile Holder C

Battery and chargNokia battery authent

Care and mainten

iv

v



Additional safety information............... 77Small children.......................................................................77Operating environment......................................................77Medical devices....................................................................77Vehicles ..................................................................................78Potentially explosive environments ...............................79Emergency calls ...................................................................79Certification information (SAR) ......................................80

Index ........................................................ 81

ENTS AND BATTERIES Use only hancements and batteries. Do not mpatible products.

ISTANCE Your device is not ant. Keep it dry.

viceribed in this guide is approved for 0, 1800, and 1900 and UMTS 900 tact your service provider for more orks.

s in this device, obey all laws and rivacy and legitimate rights of ghts.

y prevent some images, music, and g copied, modified, or transferred.

veral methods of connectivity. ice may be exposed to viruses and

Exercise caution with messages, rowsing, and downloads. ices and other software from



SafetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.

SWITCH OFF IN RESTRICTED AREAS Follow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas.

QUALIFIED SERVICE Only qualified personnel may install or repair this product.

ENHANCEMapproved enconnect inco

WATER-RESwater-resist

About your deThe wireless device descuse on the GSM 850, 90and 2100 networks. Coninformation about netw

When using the featurerespect local customs, pothers, including copyri

Copyright protection maother content from bein

Your device supports seLike computers, your devother harmful content. connectivity requests, bOnly install and use serv

vi

esst have service from a wireless the features require special eatures are not available on all may require that you make h your service provider before ervices. Your service provider can explain what charges will apply. limitations that affect how you For instance, some networks may dependent characters and

have requested that certain t activated in your device. If so, pear on your device menu. e a special configuration such as menu order, and icons. ider for more information.

2.0 protocols (HTTP and SSL) that ome features of this device, ging, web browsing, and e-mail or these technologies.

vii



trustworthy sources that offer adequate security and protection against harmful software, such as applications that are Symbian Signed or have passed the Java Verified™ testing. Consider installing antivirus and other security software on your device and any connected computer.

Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified.

Remember to make back-up copies or keep a written record of all important information stored in your device.

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

Network servicTo use the phone you muservice provider. Many ofnetwork features. These fnetworks; other networksspecific arrangements wityou can use the network sgive you instructions and Some networks may havecan use network services. not support all language-services.

Your service provider mayfeatures be disabled or nothese features will not apYour device may also havchanges in menu names, Contact your service prov

This device supports WAP run on TCP/IP protocols. Ssuch as multimedia messarequire network support f



Battery removingAlways switch the device off and disconnect the charger before removing the battery.

viii

, check your nearest Nokia Care com/repair.

are updates that may offer new ons, or improved performance. st these updates through the C application. To update the the Nokia Software Updater ible PC with Microsoft Windows ng system, broadband internet ata cable to connect your device

nd to download the Nokia tion, visit www.nokia-asia.com/cal Nokia web site.

he air are supported by your able to request updates through

ix



SupportHelpYour device has context-sensitive help. To access help when an application is open, select Options > Help. To switch between help and the application that is open in the background, select and hold , and select from the list of open applications.

To open help from the main menu, select > Help > Help. Select an application to view a list of help topics, and select the related help text. To open a keyword list, select Options > Search.

Nokia support and contact informationCheck www.nokia-asia.com/6210/support or your local Nokia website for the latest guides, additional information, downloads, and services related to your Nokia product.

On the website, you can get information on the use of Nokia products and services. If you need to contact Nokia Care services, check the list of local Nokia Care contact centres at www.nokia.com/customerservice.

For maintenance servicespoint at www.nokia-asia.

Software updatesNokia may produce softwfeatures, enhanced functiYou may be able to requeNokia Software Updater Pdevice software, you needapplication and a compat2000, XP, or Vista operatiaccess, and a compatible dto the PC.

To get more information aSoftware Updater applicasoftwareupdate or your lo

If software updates over tnetwork, you may also bethe device.

http://www.nokia-asia.com/6210/support

http://www.nokia.com/customerservice

http://www.nokia-asia.com/repair

http://www.nokia-asia.com/softwareupdate

http://www.nokia-asia.com/softwareupdate

9208673_6210Navigator_en_apac_v1.0_web.fm Page 0 Friday, June 6, 2008 5:57 PM


Downloading software updates may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

Make sure that the device battery has enough power, or connect the charger before starting the update.

x

1

G e t s t a r t e d

r.



Get startedInsert a (U)SIM card and batteryThis device uses BL-5F batteries.

1. To open the back cover of the device, press the back cover release button.

2. Lift the back cover to remove it.

3. To remove the battery, lift it from the end.

4. Slide the (U)SIM card into the SIM card holder. Ensure that the gold-coloured contact area on the card is facing downward on the device, and the beveled corner faces toward the card holder slot.

5. Replace the battery.

6. Replace the back cove

G e t s t a r t e d

ry card not remove the memory card in n operation when the card is being ving the card in the middle of an damage the memory card as well nd data stored on the card may be

, briefly press the power key.mory card, and select OK > Yes.rd slot door. to release it.d select OK.

tteryrecharged but the charging levels

to the wall outlet. to the device. You can use your rging.


2 Copyright © 2008 Nokia. All rights reserved.

Memory cardUse only compatible microSD and microSDHC cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.

Insert a memory cardNote that the memory card may be supplied with the device, and may already be inserted.1. Open the memory card slot door.

2. Place the memory card in the slot with the gold-coloured area facing down. Push the card gently to lock it into place.

3. Close the slot door.

Remove a memoImportant: Dothe middle of aaccessed. Remooperation may as the device, acorrupted.

1. In the standby mode2. Scroll to Remove me3. Open the memory ca4. Push the card gently5. Pull the card out, an6. Close the slot door.

Charge the baYour battery has been pmay vary.1. Connect the charger2. Connect the charger

device while it is cha

3

G e t s t a r t e d

ice

key.

code, elect

lock , and ting .

e

t the time zone of your location rence with respect to Greenwich er the date. See “Time and date”,



3. When the battery is fully charged, disconnect the charger from the device, then from the wall outlet.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

The charging time depends on the charger and the battery used.

Switch the devon and offPress and hold the power

If the device asks for a PINenter the PIN code, and sOK.

If the device asks for the code, enter the lock codeselect OK. The factory setfor the lock code is 12345

Set the time, timzone, and dateEnter the local time, selecin terms of the time diffeMean Time (GMT), and entp. 54.

G e t s t a r t e d

settingstimedia messaging, push to talk, , streaming, and the browser, er configuration settings on your automatically configure browser, access point, and streaming M card used. Otherwise, you can lication to configure the settings, ettings directly as a configuration e to your device. For more ity, contact your service provider okia dealer.

figuration message, and the tically saved and activated, 1 new save the settings, select Show > y need to enter a PIN code provider.

licationn starts when you switch on your . With the Welcome application, wing applications:e connection settings. . 5.



My NokiaMy Nokia is a free service that sends you tips, tricks, and support for your Nokia device regularly as text messages. If My Nokia is available in your country and supported by your service provider, your device invites you to join the My Nokia service after you have set the time and date.

Select the language for the service. If you change the language, the device restarts. To sign-up to My Nokia, select Accept and follow the instructions on the display.

To sign-up to My Nokia later, select > Help > My Nokia.

Antenna locations• Cellular antenna (1)• Bluetooth antenna (2)• GPS antenna (3)Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.

ConfigurationBefore you can use mule-mail, synchronisationyou must have the propdevice. Your device maymultimedia messaging, settings based on the SIuse the Sett. wizard appor you may receive the smessage, which you savinformation on availabilor nearest authorised N

When you receive a consettings are not automamessage is displayed. ToOptions > Save. You maprovided by the service

Welcome appThe Welcome applicatiodevice for the first timeyou can access the folloSett. wizard — ConfigurSee “Settings wizard”, p

5

G e t s t a r t e d



E-mail settings — Configure e-mail settings. See “E-mail settings”, p. 26.Switch — Copy or synchronise data from other compatible devices.Tutorial — Learn about the features of your device and how to use them. To start the tutorial later, select > Help > Tutorial and a tutorial item.

To open Welcome later, select > Help > Welcome.

Settings wizardThe setting wizard application configures your device for operator and e-mail settings based on your service provider. Configuring other settings may also be possible.

To use these services, you may have to contact your service provider to activate a data connection or other services.

Select > Settings > Sett. wizard.

Y o u r d e v i c e

3)14)



Your deviceKeys and parts• Earpiece (1)• Secondary camera

lens (2)• Light sensor (3)• Display (4)• Left and right selection

keys (5)• NaviTM scroll key,

hereafter referred to as scroll key, and Navi key light around it (6)

• Menu key (7)• Clear key (8)• Call key (9)• Power key / end key (10)• Navigator key with GPS light (11)• Number keys (12)

• Charger connector (1• Headset connector (• Volume keys (15)• Camera key (16)

7

Y o u r d e v i c e

standby modeently dialled numbers, press the

, press and hold the 1 key.

s or voice dialling, press and hold

essages, press and hold the left ader starts.

fly press the power key, and

t profile from any other profile, s and hold #.

he web, press and hold 0.

d standby theme, you can select add to a shortcut list in the ll keys. To select the applications ings > Phone sett. > General > y mode > Shortcuts.

line profile, in the standby mode, y, and select Offline. To leave the ss the power key, and select



• Camera flash (17)• Main camera lens (18)• Loudspeaker (19)• Micro USB connector (20)• Memory card slot (21)• Back cover release button (22)• Microphone (23)During extended operation, the device may feel warm. In most cases, this condition is normal. If you suspect the device is not working properly, take it to the nearest authorised service facility.

Standby modeWhen you have switched on the device, and it is registered to a network, the device is in the standby mode and ready for use.

To select the view for the standby mode, select > Settings > Phone sett. > General > Personalisation > Standby mode > Standby theme.

Keep your device away from magnets or magnetic fields as they may cause some applications to activate unexpectedly.

Shortcuts in the To open a list of most reccall key.

To call your voice mailbox

To use the voice commandthe right selection key.

To listen to new received mselection key until Msg. re

To change the profile, brieselect a profile.

To quickly change to silenin the standby mode, pres

To start a connection to t

Depending on the selecteapplications or events to standby mode or the scroor events, select > SettPersonalisation > Standb

Offline profileTo quickly activate the Offbriefly press the power keOffline profile, briefly preanother profile.

Y o u r d e v i c e

d messages in the inbox in

ail in your remote mailbox.

es waiting to be sent in outbox.

calls.

t to Silent and Message alert tone e set to Off.

ad is locked.

is activated.

.

e device are diverted to another

or a loopset is connected to the

packet data connection is active, hold, or a connection is available.

et data connection is active in a t supports EGPRS, or the r a connection is available. EGPRS in the data transfer.

S packet data connection is active, hold, or a connection is available.



When the Offline profile is active, all the connections to a cellular network are turned off. However, you can use your device without a SIM card, and listen to the radio or music using the Music Player. Remember to switch off your device when wireless phone use is prohibited.

Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.

Indicators

Icons or — The device is connected to a UMTS or GSM

network.

— HSDPA (network service) in the UMTS network is activated.

— The device is in the Offline profile and not connected to a cellular network.

— A memory card is inserted in the device.

— You have unreaMessaging.

— You have new e-m

— You have messag

— You have missed

— Ringing type is seand E-mail alert tone ar

— The device keyp

— The loudspeaker

— An alarm is active

— All calls to thnumber.

or — A headset device.

or or — A GPRSor the connection is on

or or — A packpart of the network thaconnection is on hold, oYour device may not use

or or — A UMTor the connection is on

9

Y o u r d e v i c e

ttings, select > Settings > ersonalisation > Display > meout period after which the select Screen saver time-out. reen saver is active, select Screen

ss the functions in your device. , select .a folder, scroll to it, and press the

f the functions in the menu, the default order described in

, select Options > Change Menu

an applicationm in applications, such as an llery, press #. To mark or unmark , press and hold #, and scroll.



or — Bluetooth connectivity is switched on, or data is being transmitted using Bluetooth technology.

— A USB connection is active.

— The GPS receiver is active

Other indicators may also be shown.

Light indication

GPS lightThe GPS light blinks when your device is trying to establish a GPS connection, and remains on when the GPS connection is established. When you close an application using GPS connection, the light blinks quickly a few times.

Navi key lightYou can set the Navi key light to blink slowly to indicate when the device is switched on. The light turns on for a few second at intervals of approximately 20 seconds. To activate the status light, select > Settings > Phone sett. > General > Personalisation > Standby mode > Status light > On.

Missed eventsThe Navi key light blinks slowly for a few minutes after a missed event, such as a missed call.

Screen saverTo set the screen saver sePhone sett. > General > PScreen saver. To set the tiscreen saver is activated, To set for how long the scsaver duration.

MenuIn the menu you can acceTo access the main menuTo open an application or scroll key.If you change the order othe order may differ fromthis user guide.To change the menu viewview and a view type.

Mark items in To mark or unmark an iteimage or a video clip in Gaseveral consecutive items

Y o u r d e v i c e

nlerometer that senses the .

tent automatically when you turn e or back to a vertical position, hone sett. > General > Sensor ome applications and features may display content.

ols and snooze alarms by turning the y faces down, select > General > Sensor settings >

rning control, and mark Silencing s.

keyguard)n you close the slide, select > General > Slide handling > hange > On when closing slide.

omatically lock the keypad after a Settings > Phone sett. > one and SIM card > Keypad efined and the desired time.



Switch between applicationsTo switch between open applications, do one of the following:• Select Options > Show open applicats. and the

application.• Press and hold . Scroll to an application, and select it.

Close an applicationTo close an application or a folder, select Back and Exit as many times as needed to return to the standby mode, or select Options > Exit.

Leaving applications running in the background increases the demand on battery power and reduces the battery life.

Volume controlTo adjust the earpiece or loudspeaker volume during a call or when listening to an audio file, press the volume keys. To activate or deactivate the loudspeaker during a call, select Loudsp. or Handset.

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Display rotatioYour device has an accemovement of the device

To rotate the display conthe device on its left sidselect > Settings > Psettings > Sensors On. Snot support rotating the

Turning contrTo be able to silence calldevice so that the displaSettings > Phone sett. >Sensors > On. Select Tucalls and Snoozing alarm

Keypad lock (To lock the keypad wheSettings > Phone sett. >Keyguard activation > C

To set the device to autcertain time, select >General > Security > Phautolock period > User d

11

Y o u r d e v i c e

lps to lock your device. The preset e code, keep the new code secret te from your device.

select > Settings > Phone > Phone and SIM card > Lock matic locking of your device,

iod > User defined.

your device is locked, your and additional charges may on, please contact Nokia Care

d is locked, calls may be possible number programmed into your

n number (PIN) code or the cation number (UPIN) code (4 to our SIM card. The (U)PIN code is SIM card. Set the device to e the device is switched on,

one sett. > General > Security > code request > On.



Opening the slide unlocks the keypad. To unlock the keypad when the slide is closed, press the left selection key and select OK within 1.5 seconds.

When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device.

Remote lockYou can lock your device and memory card remotely using a text message. To enable remote locking and to define the text message content to be used, select > Settings > Phone sett. > General > Security > Phone and SIM card > Remote phone locking > Enabled. Enter the text message content (5 to 20 characters), verify it, and enter the lock code.

Access codesTo set how your device uses the access codes, select > Settings > Phone sett. > General > Security > Phone and SIM card.

Lock codeThe lock code (5 digits) hecode is 12345. Change thand in a safe place separa

To change the lock code, sett. > General > Securitycode. To activate the autoselect Phone autolock per

If you forget the code anddevice will require serviceapply. For more informatiCenter.

When the device or keypato the official emergencydevice.

PIN codesThe personal identificatiouniversal personal identifi8 digits) help to protect yusually supplied with therequest the code each timselect > Settings > PhPhone and SIM card > PIN

Y o u r d e v i c e

vice) is a mobile content shop .

discover, preview, buy, download, rvices, and applications. The items atalogs and folders provided by rs. The available content depends .

ownload!.

twork services to access the most information on additional items load!, contact your service or manufacturer of the item.

ions to your device. To access the Applications > My own.

ly install and use applications and from trusted sources, such as at are Symbian Signed or have VerifiedTM testing.



The PIN2 code may be supplied with the SIM card and is required for some functions.

The module PIN is required to access the information in the security module. The signing PIN is required for the digital signature. The module PIN and the signing PIN are supplied with the SIM card if the SIM card has a security module in it.

PUK codesThe personal unblocking key (PUK) code or the universal personal unblocking key (UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code, respectively. The PUK2 code is required to change a blocked PIN2 code.

If needed, contact your local service provider for the codes.

Barring passwordThe barring password (4 digits) is required when using call barring. You can obtain the password from your service provider. If the password is blocked, contact your service provider.

Download!Download! (network seravailable on your device

With Download! you canand upgrade content, seare categorised under cdifferent service provideon your service provider

Select > Internet > D

Download! uses your neup-to-date content. Foravailable through Downprovider, or the supplier

My ownYou can install applicatapplications, select >

Important: Onother software applications thpassed the Java

13

Y o u r d e v i c e

data cable

B data cable to the USB

connection mode or change the ettings > Connectivity > USB > the desired mode. To set is activated automatically,

> No.



Connect a compatible headset

Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV Connector.

When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume levels.

Connect a USB

Connect a compatible USconnector.

To select the default USBactive mode, select > SUSB connection mode andwhether the default modeselect Ask on connection

C a l l f u n c t i o n s

number from the standby mode,

way to call frequently used by mode. You need to assign a eed dialling keys 2 to 9 (the 1 is ll mailbox), and set Speed dialling

er to a speed dialling key, select ial. Scroll to a key icon, and select To change the number, select

lling, select > Settings > Phone peed dialling > On.

number, press and hold the speed ll begins.

ox (network service), from the d hold 1. You can have call s and multiple phone lines.



Call functionsTo adjust the volume during a call, press the volume keys.

Make a voice call1. In the standby mode, enter the phone number,

including the area code. Press the clear key to remove a number.For international calls, press * twice for the international prefix (the + character replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2. To call the number, press the call key.3. To end the call, or to cancel the call attempt, press the

end key.To select whether active calls are ended when closing the slide, select > Settings > Phone sett. > General > Slide handling > Closing the slide > Change > End active call or Continue active call

To make a call from Contacts, select > Contacts. Scroll to the desired name; or enter the first letters of the name, and scroll to the desired name. To call the number, press the call key.

To call a recently dialledpress the call key.

Speed diallingSpeed dialling is a quicknumbers from the standphone number to the spreserved for the voice cato On.

To assign a phone numb> Settings > Speed d

Assign and the contact.Options > Change.

To activate the speed diasett. > Phone > Call > S

To call a speed dialling dialling key until the ca

Call mailboxTo call your voice mailbstandby mode, press anmailboxes for voice call

15


ult is not the correct one, before entry.

ce callerence calls (network service) x participants, including yourself.t participant.her participant, select Options >

ce call when the new call is ons > Conference. to the conference call, repeat ions > Conference > Add to

call, press the end key.

ct a calle call key.

select Silence.

e end key, or select Options > ed Call divert > If busy, rejecting

a reply to the caller instead of Options > Send message. age reply and edit the message,



To define the call mailbox number if no number is set, select > Settings > Call mailbox. Scroll to Voice mailbox, and enter the corresponding mailbox number. To change the call mailbox number, select Options > Change number. For the call mailbox number, contact your service provider.

Voice diallingA voice tag is added automatically to all entries in Contacts. Use long names, and avoid similar names for different numbers.

Make a voice dialling callVoice tags are sensitive to background noise. Use voice tags in a quiet environment.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances.

1. In the standby mode, press and hold the right selection key.If you are using a compatible headset with the headset key, press and hold the headset key.

2. When Speak now is displayed, speak the voice command clearly. The device plays the voice command of the best match. After 1.5 seconds, the device dials

the number; if the resdialling select another

Make a conferenYour device supports confbetween a maximum of si1. Make a call to the firs2. To make a call to anot

New call.3. To create the conferen

answered, select OptiTo add another personstep 2, and select Optconference.

4. To end the conference

Answer or rejeTo answer a call, press th

To mute the ringing tone,

To reject the call, press thReject. If you have activatthe call diverts the call.

To send a text message asanswering the call, selectTo activate the text mess


a still image to be sent instead of

deo sending from your device.

ber in the standby mode and , select > Contacts, scroll to the select Options > Video call.showing video or only hearing call, select from the toolbar or Disable video sending.ideo sending during a video call, d as a video call. Check the pricing perator or service provider.l, press the end key.

calls, is displayed.

l, press the call key. Allow video r? is shown. If you select Yes, he camera in your device is shown , video sending is not activated.

sending during a video call, s a video call. Check the pricing er.

ess the end key.



select > Settings > Phone sett. > Phone > Call > Reject call with message and Message text.

To determine whether calls are answered automatically when opening the slide, select > Settings > Phone sett. > General > Slide handling > Opening the slide > Change > Answer incoming call or Call not answered.

Call waitingDuring a call, to answer the waiting call, press the call key. The first call is put on hold. To switch between the two calls, select Swap. To end the active call, press the end key.

To activate the call waiting function (network service), select > Settings > Phone sett. > Phone > Call > Call waiting > Activate.

Video calls

Make a video callTo make a video call, you may need to have a USIM card and be within the coverage of a UMTS network. For availability of and subscription to video call services, contact your service provider. A video call can only be made between two parties and when no other voice, video, or data calls are active. The video call can be made to a compatible mobile phone or an ISDN client.

You have captured video sending.

You have denied vi

1. Enter the phone numselect Video call. Ordesired contact, and

2. To change between sound during a videoEnable video sendingIf you have denied vthe call is still chargewith your network o

3. To end the video cal

Answer a video When a video call arrive

To answer the video calimage to be sent to callethe image captured by tto the caller. Otherwise

If you have denied videothe call is still charged awith your service provid

To end the video call, pr

17


e) — to select the phone lines for short messages. This is shown orts two phone lines.ice) — to enable or disable the

Phone sett. > Phone > Call divert

want to divert, for example,

ion. For example, to divert voice er is busy or when you reject an f busy.ate and the phone number to ert the calls. Several divert at the same time.ing cannot be active at the same

Phone sett. > Phone > Call ce) to restrict the calls that you your device.



Call settings

CallSelect > Settings > Phone sett. > Phone > Call and from the following:Send my caller ID (network service) — to display or hide your phone number from the person to whom you are callingCall waiting (network service) — See “Call waiting”, p. 16.Reject call with message and Message text — See “Answer or reject a call”, p. 15.Own video in recvd. call— to set whether you allow to send your own video image when you receive a video callImage in video call — to select a still image to be shown when you deny a video callAutomatic redial — to set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attemptShow call duration and Summary after call — to set the device to display the call duration during a call and the approximate duration of the last callSpeed dialling — See “Speed dialling”, p. 14.Anykey answer — to answer an incoming call by briefly pressing any key, except the left and right selection keys, volume keys, and end key

Line in use (network servicmaking calls and sendingonly if the SIM card suppLine change (network servline selection

Call divert1. Select > Settings >

(network service).2. Select which calls you

Voice calls.3. Select the desired opt

calls when your numbincoming call, select I

4. Select Options > Activwhich you want to divoptions can be active

Call barring and call diverttime.

Call barring1. Select > Settings >

barring (network servimake and receive with


d live video from your mobile tible mobile device during a voice

quirements 3G universal mobile tem (UMTS) connection. etwork availability and the fees lication, contact your service

must do the following:ice is set up for person-to-person

sender and recipient are TS network.

active UMTS connection and you work coverage. If you move away rk during the sharing session, s discontinued, but your voice call



2. Scroll to the desired barring option, and select Options > Activate. To change the settings, you need the barring password given by your service provider.

Call barring and call diverting cannot be active at the same time.

When calls are barred, calls may be possible to certain official emergency numbers.

NetworkSelect > Settings > Phone sett. > Phone > Network and from the following:Network mode — to select which network to use (this is shown only if it is supported by the service provider). If you select Dual mode, the device uses the GSM or UMTS network automatically.Operator selection — to set the device to search for and automatically select one of the available networks, select Automatic. To select the desired network manually from a list of networks, select Manual. The selected network must have a roaming agreement with your home network.Cell info display (network service) — to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology, and to activate cell info reception

Video sharingUse video sharing to sendevice to another compacall.

Video sharing reVideo sharing requires atelecommunications sysFor information about nassociated with this appprovider.

To use video sharing you• Ensure that your dev

connections.• Ensure that both the

registered to the UM• Ensure you have an

are within UMTS netfrom a UMTS netwothe sharing session icontinues.

19


r video clip are recording with the device s > Share video > Live video share a saved video clip, he clip you want to share.nvitation to the SIP address you

he invitation, select the SIP t; or enter a SIP address,

atically when the recipient , and the loudspeaker is active. s to control the video sharing.ion, select Stop. To end the voice .

ionu receive an invitation.

sender’s name or SIP address. aring session. To decline the

o the voice call, select No.



Video sharing settingsA person-to-person connection is also known as a session initiation protocol (SIP) connection. Before you can use video sharing, ask your service provider for the configured SIP profile to be used in your device.

Select > Settings > Phone sett. > Connection > Video sharing and from the following:Video sharing — to select whether the video sharing is enabledSIP profile — to select a SIP profileVideo saving — to set whether the live videos are automatically savedPreferred saving memory — to select whether to save the videos to the device memory or to a memory cardCapability alert tone — to set an alert tone to sound when video sharing is available during a call

If you know a recipient’s SIP address, you can save it to Contacts. Select > Contacts, the contact, and Options > Edit > Options > Add detail > SIP or Share video. Enter the SIP address (username@domainname). You can use an IP address instead of a domain name.

Share live video o1. To share live video you

camera, select Optionduring a voice call. Toselect Video clip and t

2. The device sends the isaved to Contacts.If necessary, to send taddress of the recipienand select OK.

3. Sharing begins automaccepts the invitationUse the toolbar button

4. To end the sharing sesscall, press the end key

Accept an invitatYour device rings when yoThe invitation shows the Select Yes to begin the shinvitation and to return t




LogTo view missed, received, or dialled calls; text messages; packet data connections; and fax and data calls registered by the device, select > Log.

In the standby mode, you can use the call key as a shortcut to Dialled numbers in the Recent calls log (network service).

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.

Note: Some timers, including the life timer, may be reset during service or software upgrades.

21

W r i t e t e x t

ional text input9, repeatedly until the desired he 1 key for the most common ecial characters.

t is on the same key as the e cursor appears (or scroll ut period), and enter the letter.

tive text input–9, only once for one letter. r every keypress. For the most marks, press 1.ed the word and it is correct, rward or insert a space.ect, to view the matching words nd one by one, press * repeatedly.wn after the word, the word you

t in the dictionary. To add a word t Spell. Enter the word (up to 32 . The word is added to the ictionary becomes full, a new st added word.



Write textTraditional and predictive text inputWhen you write text, on the display indicates predictive text input and traditional text input. To set the predictive text input on or off, press # repeatedly, or press *, and select Activate predictive text or Predictive text > Off.

, , or next to the text input indicator indicates the character case or number mode. To change the character case, or to change between letter and number mode, press # repeatedly.

To change the writing language of your device, select > Settings > Phone sett. > General > Personalisation > Language > Writing language. The writing language affects the characters available when writing text and the predictive text dictionary used. Not all characters available under a number key are printed on the key.

Write with traditPress a number key, 2 to character appears. Press tpunctuation marks and sp

If the next letter you wanpresent one, wait until thforward to end the time-o

Write with predic1. Press a number key, 2

The word changes aftecommon punctuation

2. When you have finishto confirm it, scroll foIf the word is not corrthe dictionary has fouIf the ? character is shointended to write is noto the dictionary, selecletters), and select OKdictionary. When the dword replaces the olde

W r i t e t e x t



Common functions in traditional and predictive text inputTo insert a number, press and hold the number key.

To enter punctuation marks and special characters, press and hold *.

To erase a character, press the clear key. To erase more characters, press and hold the clear key.

To insert a space, press 0. To move the cursor to the next line, press 0 three times.

Copy and delete text1. To select letters and words, press and hold #, and at the

same time scroll left or right. To select lines of text, press and hold #, and at the same time scroll up or down.

2. To copy the text, press and hold #, and at the same time select Copy.To delete the selected text, press the clear key.

3. To insert the text, scroll to the insertion point, press and hold #, and at the same time select Paste.

23

M e s s a g i n g

he phone numbers or e-mail ents, or, to select recipients from oll key. Separate recipients with

r a multimedia, or e-mail o the Subject field. If the subject a multimedia message, age header fields, mark Subject,

sage field and enter the message

message, the message length any characters you can enter in ple, 10 (2) means that you can

for the text to be sent as a series

ch as an image, video clip, note, multimedia, or e-mail message, d select Insert content. clip for an audio message, previously recorded sound clip,

t sound clip > From Gallery.select Options > Send.



MessagingBefore you can receive or send messages or e-mail, you must have the necessary settings and access points defined. Contact your service provider for the settings.

Write and send messagesYour device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options, take up more space, limiting the number of characters that can be sent in a single message.

The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.

Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.

1. Select > Messaging > New message and the message type. To create a text message or multimedia message, select Message. The message type changes automatically based on the content.

2. In the To field, enter taddresses of the recipiContacts, press the scra semicolon (;).

3. To enter the subject fomessage, scroll down tfield is not visible for select Options > Messand select OK.

4. Scroll down to the mescontent.When you write a textindicator shows how mthe message. For examstill add 10 charactersof two text messages.To insert an object, suor a business card, to apress the scroll key, anTo record a new soundselect Record. To use aselect Options > Inser

5. To send the message,

M e s s a g i n g

e messages are enabled and re downloaded automatically, Options > Settings > Service

mailbox, the name you give to the ailbox. You can have up to six

3 mailboxesnd the mailbox. Connect to connect to your mailbox (network o view previously retrieved e-mail No.

ox afterwards, select Options > online, to end the data connection select Options > Disconnect.

-mail messagestrieve e-mail and whether you , selected, or all messages.essage, select it.hments, indicated with , achments. You can open, save or supported formats.



InboxInbox contains received messages except e-mail and cell broadcast messages. To read received messages, select > Messaging > Inbox and the message.

To view the list of media objects that are included in the multimedia message, open the message, and select Options > Objects.

Your device can receive many kinds of messages, such as operator logos, business cards, calendar entries, and ringing tones. You can save the special message content to your device. For example, to save a received calendar entry to the calendar, select Options > Save to Calendar.

Note: The picture message function can be used only if it is supported by your service provider. Only compatible devices that offer picture message features can receive and display picture messages. The appearance of a message may vary depending on the receiving device.

Service messagesService messages (network service) are notifications that may contain a text message or the address of a browser service.

To define whether servicwhether the messages aselect > Messaging >message.

E-mailWhen you create a new mailbox replaces New mmailboxes.

IMAP4 and POPSelect > Messaging amailbox? is displayed. Toservice), select Yes, or tmessages offline, select

To connect to the mailbConnect. When you are to the remote mailbox,

Retrieve and read e1. Select Options > Re

want to retrieve new2. To open an e-mail m

To view e-mail attacselect Options > Attsend attachments in

25

M e s s a g i n g

ssage, scroll to a message, and nding.

rInbox or a mailbox, scroll to the sages, and select Options >

e received a new message, eived messages, in the standby old the left selection key until .

uage and voice used for reading oice properties, such as rate and gs > Speech.

r the message reader, in Speech,

on the SIM cardessages, you need to copy them

Select > Messaging > mark the messages you want to > Copy and the folder to which sages.



Delete e-mail messagesTo delete an e-mail message from the device and retain it in the remote mailbox, select Options > Delete > Phone only. To delete an e-mail from both the device and the remote mailbox, select Options > Delete > Phone and server.

To cancel deletion of an e-mail from both the device and server, scroll to an e-mail that has been marked to be deleted during the next connection, and select Options > Restore.

Sync mailboxesSelect > Messaging and the sync mailbox.

To synchronise your device with the remote mailbox, select Options > Synchronisation > Start.

To view received messages, select Inbox and the message.

OutboxThe outbox folder is a temporary storage place for messages that are waiting to be sent. To access the outbox folder, select > Messaging > Outbox.

To retry sending a message, scroll to the message and select Options > Send.

To postpone sending a meselect Options > Defer se

Message readeTo listen to a message in message or mark the mesListen.

Tip: When you havto listen to the recmode, press and hMsg. reader starts

To select the default langmessages, and adjust the vvolume, select > Settin

To select other settings foscroll right to Settings.

View messagesBefore you can view SIM mto a folder in your device.Options > SIM messages,copy, and select Optionsyou want to copy the mes

M e s s a g i n g

saging settingsessage settings, such as which whether multimedia messages are select > Messaging > ultimedia message.

Options > Settings > E-mail > and from the following:o define the connection settings, protocol usede user settings, such as when hether to include a signatureefine retrieval settings, such as ages are retrieved and how many

define settings for retrieving at set intervals or when an e-mail from the server

ified number of sent messages are and whether to store the messages r memory card, select > Settings > Other.



Cell broadcastCheck with your service provider whether cell broadcast (network service) is available and what the available topics and related topic numbers are.

Select > Messaging > Options > Cell broadcast. To activate the service, select Options > Settings > Reception > On.

Service commandsTo enter and send service commands (also known as USSD commands) such as activation commands for network services to your service provider, select > Messaging > Options > Service commands. To send the command, select Options > Send.

Messaging settings

Text message settingsTo define text message settings, such as the message centre and character encoding used, select > Messaging > Options > Settings > Text message.

Multimedia mesTo define multimedia maccess point is used andretrieved automatically,Options > Settings > M

E-mail settingsSelect > Messaging >Mailboxes, the mailbox Connection settings — tsuch as the servers and User settings — to definmessages are sent and wRetrieval settings — to dwhich parts of the messmessages are retrievedAutomatic retrieval — tomessages automaticallynotification is received

Other settingsTo define whether a specsaved to the Sent folder in the device memory oMessaging > Options >

27

C o n t a c t s

ivated, calls may be possible to mber programmed into your

s and addresses to a contact, ns > Defaults. Scroll to the d select Assign.

so that you can send text or al recipients at the same time, ll right, and select Options >

for the group, and open the dd members. Mark the contacts oup, and select OK.

one or a video ringing tone for each a ringing tone to a contact,

open the contact. tone and the ringing tone. To add , scroll right to the groups list, oup. Select Options > Ringing



ContactsSave and manage contact informationTo save and manage contact information, such as names, phone numbers, and addresses, select > Contacts.

To add a new contact, select Options > New contact. Fill in the fields you want, and select Done.

To set your device to show contacts in the device memory and in the SIM card in the list of contacts, select Options > Settings > Contacts to display, and mark Phone memory and SIM memory.

To copy names and numbers from a SIM card to your device or vice versa, scroll to the contact (or mark the desired contacts), and select Options > Copy > Phone memory or SIM memory.

To view information about the memory consumption of contacts, select Options > Contacts info.

To view the list of fixed dialling numbers, select Options > SIM numbers > Fixed dial contacts. This setting is only shown if supported by your SIM card.

When fixed dialling is actthe official emergency nudevice.

To assign default numberselect it, and select Optiodesired default option, an

Contact groupsTo create a contact groupe-mail messages to severselect > Contacts. ScroNew group. Enter a namegroup. Select Options > Ayou want to add to the gr

Add a ringing tYou can set a ringing tonecontact and group. To addselect > Contacts, andSelect Options > Ringinga ringing tone to a groupand scroll to a contact gr

C o n t a c t s



tone and the ringing tone for the group. To remove the personal or group ringing tone, select Default tone as the ringing tone.

29

P o s i t i o n i n g

ed for precise location ould never rely solely on location r and cellular radio networks for .

sed to retrieve assistance data tion, which assists in calculating rrent location when your device atellites.

y charge you for this connection k subscription. Contact your rrect internet access point and vice.

itioning method, such as A-GPS, one sett. > General > methods, the positioning sable.

red to use the Nokia A-GPS ider-specific A-GPS settings are ata is retrieved from the Nokia

when needed.



PositioningYou can use applications such as Maps and GPS data to find out your location, or measure distances and coordinates. These applications require a GPS connection.

About GPSThe Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites.

Your device has an internal GPS receiver.

The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow reception of GPS signals.

Any GPS should not be usmeasurement, and you shdata from the GPS receivepositioning or navigation

Assisted GPSAssisted GPS (A-GPS) is uover a packet data connecthe coordinates of your cuis receiving signals from s

Your network operator maaccording to your networservice provider for the cocharges related to the ser

To enable or disable a posselect > Settings > PhPositioning > Positioningmethod, and Enable or Di

Your device is preconfiguservice, if no service provavailable. The assistance dA-GPS service server only


correctlyr, from an upright position, move f about 45 degrees, with an e sky.

ection may take from a couple of tes, even longer in a vehicle.

ay drain the device battery faster.

d the satellite signal, consider the

o outdoors to receive a better

move to a more open space.d does not cover the GPS receiver

tions are bad, the signal strength

tinted (athermic) windows, satellite signals.



To use A-GPS, you must have a packet data internet access point defined. Your device asks for the internet access point when A-GPS is used for the first time. To define the access point, see “Positioning settings”, p. 30.

Set up GPS connection

Positioning settingsSelect > Settings > Phone sett. > General > Positioning and from the following:Positioning methods — to enable or disable different positioning methodsPositioning server — to edit positioning server settings. To select whether to allow automatic connections to the positioning server, to be asked every time, or to never connect to the positioning server, select Positioning server use. To define an access point for A-GPS, select Access point. Only a packet data internet access point can be used. Your device asks for the internet access point when A-GPS is used for the first time. To define the server used, select Server address.Notation preferences — to define the measurement system and coordinate format

Hold your deviceWhen using the receivethe device to an angle ounobstructed view of th

Establishing a GPS connseconds to several minuSee “GPS light”, p. 9.

Using the GPS receiver m

If your device cannot finfollowing:• If you are indoors, g

signal.• If you are outdoors, • Check that your han

of your device.• If the weather condi

may be affected.• Some vehicles have

which may block the

31


y country or region. For example, e due to legal restrictions of e maximum extent permitted by laims any and all warranty with , accuracy, correctness or update

our current location on the map, cities and countries, navigate to uidance, search for addresses

terest, plan routes from one ave locations as landmarks and devices. You can also purchase vel guides and traffic s are not available in all

aded on the memory card in your more maps through the internet C software. See “Download

efine the positioning methods e “Positioning settings”, p. 30. ation information, use either the ible external GPS receiver.



Satellite signal statusTo check how many satellites your device has found, and whether your device is receiving satellite signals, select > Applications > GPS data > Position > Options > Satellite status.

If your device has found satellites, a bar for each satellite is shown in the satellite information view. When your device has received enough data from the satellite signal to calculate the coordinates of your location, the bars turn dark blue.

Position requestsYou may receive a request from a network service to receive your position information. Service providers may offer information about local topics, such as weather or traffic conditions, based upon the location of your device.

When you receive a position request to allow your position information to be sent, select Accept, or to deny the request, select Reject.

MapsThe map coverage varies bmaps may not be availablcountries or regions. To thapplicable law, Nokia discrespect to the availabilityof maps.

About MapsWith Maps, you can see ybrowse maps for differenta destination with voice gand different points of inlocation to another, and ssend them to compatible extra services, such as trainformation. These servicecountries or regions.

Some maps may be pre-lodevice. You can downloadusing Nokia Map Loader Pmaps”, p. 34.

Maps uses GPS. You can dused with your device. SeFor the most accurate locinternal GPS or a compat


) shows the availability and signal. One bar indicates one ce receives enough data from the PS connection, the bar turns green. e signals from at least four e coordinates of your location. ion, signals from three satellites

* or #. To move on the map, use the automatically downloaded if you is not covered by maps already load maps”, p. 34. The maps are

nloading may involve the ounts of data through your service more information on data ntact your service provider.

ally saved in the device memory or y card (if inserted).

etic compass.

ays be properly calibrated. arge metal objects, other external ning or closing the slide may the compass. Never rely solely on



Browse mapsTo start Maps, press the Navigator key.

When you use Maps for the first time, you may need to select a cellular access point for downloading map information for your current location. To change the default access point later, select Options > Tools > Settings > Internet > Network destination.

To receive a note when your device registers to a network outside your home network, select Options > Tools > Settings > Internet > Roaming warning > On. For details and roaming costs, contact your network service provider.

The data transfer indicator shows the internet connection used and the amount of data transferred since the application started.

Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography provided for use in this device.

When you open Maps, it shows the location that was saved from your last session or the capital of the country you are in. The map of the location is also downloaded, if needed.

To establish a GPS connection and zoom in to your last known location, press the Navigator key, or select Options > My position.

A GPS indicator (strength of the satellitesatellite. When the devisatellite to establish a GYour device must receivsatellites to calculate thAfter the initial calculatmay be enough.

To zoom in or out, press scroll key. A new map isscroll to an area which downloaded. See “Downfree of charge, but dowtransmission of large amprovider's network. For transmission charges, coThe maps are automaticon a compatible memor

CompassYour device has a magn

The compass should alwElectromagnetic fields, lcircumstances, and opereduce the accuracy of the device compass.

33


ity or area displayed on the map, dress of the location in the arch. To find a location in y and the full or partial address, ble, write the name of city in the If you are unsure of the address, haracters of the address. To find ry, enter the full name of the hree-letter ISO country code and ind London using the country and select Search.

, select Options > Search > n * and City or post code are

rch for places and attractions in > Search > Places and a find a hotel, select Options > modation. To find a hotel by its d select Search, or to browse the r Search all.

in Contacts, select Options > tions > Select from Contacts.



To enable the compass and try to find your current position, press the Navigator key. If the circle around the compass is red, the compass is not calibrated. To calibrate the compass, rotate the device around all axes with your wrist in a continuous movement until the circle is green. When you rotate the device, make sure that the device display momentarily faces toward the ground.

If the circle is yellow, the calibration accuracy is low, and you should continue rotating the device. When the compass is enabled and the circle around the compass is green, the map view turns automatically according to which direction the top of the device is pointing.

To enable or disable the compass, select Options > Tools > Turn compass on or Turn compass off. When the compass is not in use, the circle around the compass is white and the map view does not turn automatically.

Find locationsTo find a location in the center the full or partial adsearch field, and select Seanother city, enter the citand select Search. If possilocal language or English.enter the only first three ca city in a different countcountry in English or the tthe city. For example, to fcode, enter GBR London,

To find a specific addressAddresses. Country/Regiomandatory.

To browse through or seayour area, select Optionscategory. For example, toSearch > Places > Accomname, enter the name, anhotels, select a category o

To find an address saved Search > Addresses > Op


e routes, or search for locations

involve the transmission of large h your service provider’s network. vider for information about data

wnloading of maps, for example, e network, select Options > net > Go online at start-up > No.

be used and how much memory or saving maps or voice guidance ools > Settings > Map > Memory

memory use. When the memory ta is deleted. The saved maps data kia Map Loader PC software.

software that you can use to aps and extra services from the memory card. Use the Maps maps at least once before using okia Map Loader uses the Maps

ader to a compatible PC, see and follow the instructions on the



Save and send locationsTo save a location to your device, press the scroll key, and select Add to My places.

To send a location to a compatible device, press the scroll key, and select Send. If you send the location in a text message, the information is converted to plain text.

View your saved itemsTo view the locations or routes you have saved to your device, select Options > Favourites > My places or Routes. Locations saved in Landmarks are displayed in My places.

To check which locations you have searched for on the map, select Options > Favourites > History.

To create a collection of your favourite places, select Options > Favourites > Collections > New collection. Enter the name for the collection. To add locations to your collection, open My places, scroll to a location, press the scroll key, and select Add > To collection.

Download mapsWhen you browse a map in Maps, a new map is automatically downloaded if you scroll to an area which is not covered by maps already downloaded. The data counter (kB) shows the amount of network traffic when

you browse maps, creatonline.

Downloading maps mayamounts of data througContact your service protransmission charges.

To prevent automatic dowhen outside your homTools > Settings > Inter

To define the memory tospace you want to use ffiles, select Options > Tto be used and Maximumis full, the oldest map dacan be deleted using No

Nokia Map LoaderNokia Map Loader is PCdownload and install minternet to a compatibleapplication and browse Nokia Map Loader, as Nhistory information.

To install Nokia Map Lohttp://maps.nokia.com, screen.

http://maps.nokia.com

35


tion by car or on foot, ving or Start walking.

ptions > Save route.

estination a location, press the scroll key, lk to.

ion for the first time, your device language for the voice guidance. ater, in the Maps main view, Settings > Navigation > Voice is not available for pedestrian

nt map views during the ll key, and select Manoeuvre rrow view.

te and use another route, te.

Options > Stop.

Mapstion and related services are independent of Nokia.

naccurate and incomplete to



Activate navigation licenceBefore you can use the navigation feature, you have to activate the included limited-time licence online using an internet access point (network service). Your service provider may charge you for the connection. To activate the licence for both car and pedestrian navigation, select Options > Extras > Drive & Walk, and follow the instructions.

After the included licence expires, to purchase a new navigation licence, select Options > Extras > Drive & Walk or Walk.

To view your licences, select Options > Extras > My licenses.

Plan a routeTo plan a route, select a location on the map or search for a location, press the scroll key, and select Add to route.

To add more locations for your route, select Options > Add route point, and search for the location.

To edit the route, press the scroll key, and select Edit route.

To define the settings for the route, select Options > Settings.

To show the route on the map, select Options > Show route.

To navigate to the destinaselect Options > Start dri

To save the route, select O

Navigate to the dTo start navigating, selectand select Drive to or Wa

When you use car navigatmay ask you to select the To change the language lselect Options > Tools > guidance. Voice guidancenavigation.

To switch between differenavigation, press the scroview, Bird's-eye view, or A

To discard the created rouselect Options > Diff. rou

To stop navigating, select

Extra services forTraffic and guide informagenerated by third partiesThe information may be i


ategories, select a category. es, select a subcategory.

e to your device, scroll to the t Yes. You can pay for the guides your phone bill, if supported by

With Landmarks, you can save the specific locations to your device. landmarks in compatible S data and Maps. In Maps, ilable in My places.

k, select Options > New landmark. quest for the coordinates of your

position. To enter the position elect Enter manually.

eset categories, select the Add to category. Select the want to add the landmark.

andmarks to a compatible device, our received landmarks are placed



some extent and is subject to availability. Never rely solely on the aforementioned information and related services.

Downloading extra services may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges.

Traffic informationThe real-time traffic information service is an extra service that provides information about events that may affect your travel. You can purchase the service and download it to your device if available in your country or region.

To purchase a licence for the traffic information service, select Options > Extras > Traffic info.

To view information about traffic events, select Options > Traffic info. The events are shown on the map as triangles and lines.

To view details of an event, including possible rerouting options, select the event and Options > Open.

To update the traffic information, select Update traffic info.

Travel guidesTo purchase and download travel guides, or to view downloaded ones, select Options > Extras > Guides.

To browse travel guide cIf there are subcategori

To download a new guiddesired guide, and selecusing a credit card or inyour service provider.

LandmarksSelect > Landmarks. position information of You can use your savedapplications, such as GPsaved landmarks are ava

To create a new landmarTo make a positioning relocation, select Current information manually, s

To add a landmark to prlandmark and Options >categories to which you

To send one or several lselect Options > Send. Yin Inbox in Messaging.

37


landmark, select > Position > Options > Save

alculation, select > Trip distance > Options > Start. tions > Stop. The calculated lay.

d time and average and and to start a new calculation, ometer and total time to zero,

accuracy, and rounding errors also be affected by availability s.



GPS dataGPS data is designed to provide route guidance information to a selected destination, position information about your location, and travelling information, such as the approximate distance and travel time to the destination.

Route guidanceStart the route guidance outdoors. Select > Applications > GPS data > Navigation.

Route guidance shows the straightest route and the shortest distance to the destination, measured in a straight line. Any obstacles on the route, such as buildings and natural obstacles, are ignored. Differences in altitude are not taken into account when calculating the distance. Route guidance is active only when you move.

To set your trip destination, select Options > Set destination and a landmark as the destination, or enter the latitude and longitude coordinates. To clear the destination, select Stop navigation.

PositionTo save your location as aApplications > GPS data >position.

Trip meterTo activate trip distance cApplications > GPS data >To deactivate it, select Opvalues remain on the disp

To set the trip distance anmaximum speeds to zero,select Reset. To set the odselect Restart.

The trip meter has limitedmay occur. Accuracy can and quality of GPS signal

G a l l e r y

clip to a contact, select Assign to

svideo clips, select > Gallery > d the image icon (Downl. graphics) ld. videos). The browser opens. the site to download from.

y, scroll to the image, select Open.

n viewing an image, press the

viewing an image, press * or #.

r in Gallery, scroll to the image,

full screen, and to return to the



GalleryMain viewTo save and organise your images, video clips, music tracks, sound clips, playlists, streaming links, .ram files, and presentations, select > Gallery.

To copy or move files to device memory or to the memory card, select a folder (such as Images), scroll to a file (or press # to mark several files), and select Options > Organise and the memory to where you want to copy or move the files.

To create new image and video clips folders, select Images or Video clips > Options > Organise > New folder and the memory. Enter a name for the folder. To move images and video clips to a folder you created, mark the files, and select Options > Organise > Move to folder and the folder.

To set an image as the wallpaper or to be shown during a call, select Images, and scroll to the image. Select Options > Use image > Set as wallpaper or Set as call image. To assign the image to a contact, select Assign to contact.

To set a video clip as a video ringing tone, select Video clips and the video. Select Options > Use video > As ringing

tone. To assign the videocontact.

Download fileTo download images or Images or Video clips anor the video icon (DownChoose a bookmark for

View imagesTo view images in Galler

To open the toolbar whescroll key.

To zoom in or out when

Edit imagesTo open the image editoselect Options > Edit.To view an image in thenormal view, press *.

39

G a l l e r y

lication, you can share the u have captured in compatible r other compatible online sharing can upload content, save and continue later, and view the e supported content types may line sharing service provider.

o clips online, you must have an age sharing service. You can service on the web page of your information and applicable your service provider.

are online. To update the list of ptions > Add new account > ine sharing service providers may nt using your device. See “Share

Gallery > Images or Video clips. nd select Options > Send > Post ice.

e, the selected images and video t state. You can open and view



To rotate an image clockwise or counterclockwise, press 3 or 1.To zoom in or out, press 5 or 0.To move on a zoomed image, scroll up, down, left, or right.To crop or rotate the image; adjust the brightness, colour, contrast, and resolution; and add effects, text, clip art, or a frame to the image, select Options > Apply effect.

Edit video clipsTo edit video clips in Gallery and create custom video clips, scroll to a video clip, and select Options > Video editor > Options > Edit video clip.

In the video editor, you can see two timelines: video clip timeline and sound clip timeline. The images, text, and transitions added to a video clip are shown on the video clip timeline. To switch between the timelines, scroll up or down.

Print imagesYou can use the device with a PictBridge-compatible printer using a USB cable.

To print images in Gallery, scroll to the image, and select Options > Print.

Share onlineWith the Share online appimages and video clips yoonline albums, weblogs, oservices on the web. You unfinished posts as draftscontent of the albums. Thvary depending on the on

To share images and videaccount with an online imusually subscribe to such aservice provider. For moreterms and costs, contact

Select > Internet > Shservice providers, select OUpdate services. Some onlallow you to add an accouonline settings”, p. 40.

Upload filesTo upload files, select >Mark the files to upload, ato web and a sharing serv

When you select the servicclips are shown in the edi

G a l l e r y

tings settings, select > Internet > > Settings and from the following:iew the list of service providerse a new account, select Options > it an existing account, select an Edit. You can enter the name for er name and password for the

o select the size for the images nd the font size used in drafts or

e default access point and the way from the server. You can also wnloaded while roaming or all hed.



the files, reorganise them, add text to them, or add new files.

To cancel the web upload process and save the created post as a draft, select Cancel > Save as draft.

To connect to the service and upload the files to the web, select Options > Post to web.

Open online serviceTo view uploaded images and video clips in the online service, and draft and sent entries in your device, select > Internet > Share online. To update a service, scroll to it, and select Options > Update service.

Select Options and from the following:

Go to webs. — to connect to the service and view the uploaded and draft albums in the web browser. The view may vary depending on the service provider.

Outbox— to view and edit the draft entries and upload them to the web

New post — to create a new entry

The available options may vary depending on the service provider.

Share online setTo edit the share onlineShare online > OptionsService providers — to vMy accounts — to creatAdd new account. To edaccount and Options > the account, and the usaccount.Application settings — tshown on the display, atext entriesAdvanced — to select thfor polling new contentenable content to be doimage data to be publis

41

C a m e r a

n object, press the camera key

ress the camera key down.

ary camera, press the camera to open the toolbar,

oll up or down.elect Capture.

t Options > Exit.om the camera, the camera is



CameraYour device has two cameras to capture still images and record video clips. A high resolution main camera is on the back of the device using the landscape mode, and a lower resolution secondary camera is on the front using the portrait mode.

Your device supports an image capture resolution of 2048x1536 pixels. The image resolution in this guide may appear different.

Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.

You can send images and video clips in a multimedia message, as an e-mail attachment, or by using Bluetooth connectivity. You can also upload them to a compatible online album. See “Share online”, p. 39.

Capture imagesMain camera1. To activate the camera, press the camera key.2. To zoom in or out, press the volume keys.

3. To lock the focus on ahalfway down.

To capture an image, pSecondary camera1. To activate the second

key, scroll left or rightand select .

2. To zoom in or out, scr3. To capture an image, s

Close the cameraTo close the camera, selecIf you open the Gallery frclosed.

C a m e r a

ramic imagesa mode with the main camera, ivate the toolbar, and select .

oramic image, press the camera a slowly left or right. The camera image and displays it as you turn. finder turns red, you are turning ets blurry. You cannot change the

To stop capturing the image,



Record video clips1. To activate the main camera, press the camera key.

To activate the secondary camera, scroll left or right to open the toolbar, and select . If the camera is in the image mode ( ), scroll left or right to open the toolbar, and select .

2. To start recording with the main camera, press the camera key. To start recording with the secondary camera, select Record. A tone sounds, indicating that recording has started.To zoom in or out of the subject using the main camera, press the volume keys, or, using the secondary camera, scroll down or up.

3. To stop recording with the main camera, press the camera key. To stop recording with the secondary camera, select Stop. The video clip is automatically saved to the Video clips folder in the Gallery. See “Gallery”, p. 38. The maximum length of the video clip depends on the available memory.

To pause recording at any time, select Pause. Video recording automatically stops if recording is paused and there are no keypresses within a minute. To resume recording, select Continue.

Capture panoTo activate the panoramscroll left or right to act

To start capturing a pankey, and turn the camercaptures the panoramicIf the arrow on the viewtoo fast and the image gdirection while turning.press the camera key.

43

M e d i a

ht. To return to the beginning of l left.

ng or podcast, scroll left again ong or podcast has started.

the volume keys.

ode and leave the player in the key. Depending on the selected tly playing song is displayed. yer, select the currently playing

Music player. The music menu . To view all songs, sorted songs, ired list in the music menu.

Music player > Playlists. t, scroll to the playlist, and select .



MediaMusic player

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

You can listen to music and podcast episodes also when the Offline profile is activated. See “Offline profile”, p. 7.

For more information about copyright protection, see “Licences”, p. 63.

Listen to music or a podcast episode1. Select > Applications > Music player.2. Select a category, such as All songs or Podcasts >

All episodes, and a song or a podcast episode.3. To play the selected file, press the scroll key.

To pause, press the scroll key. To resume the playback, press the scroll key again.

4. To stop the playback, scroll down.

To fast forward or rewind, press and hold the scroll key right or left.

To skip forward, scroll rigthe song or podcast, scrol

To skip to the previous sowithin 2 seconds after a s

To adjust the volume, use

To return to the standby mbackground, press the endstandby theme, the currenTo return to the music plasong.

Music menuSelect > Applications >shows the available musicor playlists, select the des

PlaylistsSelect > Applications >To view details of a playlisOptions > Playlist details

M e d i a

re (network service) you can search, usic for downloading to your ic, you first need to register for the of Nokia Music Store in your ic.nokia.com.

sic Store, you must have a valid your device. To open Nokia Music ations > Music player > Options >

ected with WMDRM from online r the music to your device.

ter you have updated the song , select > Applications > Music esh library.

PCth Windows Media Player, connect le and select Media transfer as the an transfer WMDRM protected edia transfer. A compatible e inserted in the device.



Create a playlist1. Select Options > Create playlist.2. Enter a name for the playlist, and select OK. 3. To add songs now, select Yes. To add songs later, select

No.4. Select artists to find the songs you want to include in

the playlist. To add a song, press the scroll key.5. When you have made your selections, select Done. If a

compatible memory card is inserted, the playlist is saved to the memory card.

To add more songs later, when viewing the playlist, select Options > Add songs.

PodcastsTo view all the podcast episodes available in your device, select > Applications > Music player > Podcasts > All episodes.

The podcast episodes have three states: never played, partially played, and completely played. If an episode is partially played, it plays from the last playback position the next time it is played. Otherwise, it is played from the beginning.

Nokia Music StoIn the Nokia Music Storebrowse, and purchase mdevice. To purchase musservice. For availability country, visit www.mus

To access the Nokia Muinternet access point inStore, select > ApplicGo to Music store.

Transfer musicYou can buy music protmusic shops and transfe

To refresh the library afselection in your deviceplayer > Options > Refr

Transfer music fromTo synchronise music withe compatible USB cabconnection mode. You cmusic files only using mmemory card needs to b

http://www.music.nokia.com

45

M e d i a

ess point — to select the access ection to the internet. To define e for searches, select Search

ownload settings. You can select asts to the device or the memory sts are updated and set the time matic update; and set how much podcasts, and what to do if the wnload limit.

o use the podcast search service, Podcasting > Options >

Search service URL.

lect > Applications > enter a keyword or a title.

and add it to your podcasts, e. You can also mark channels to time.

d new podcast episodes to which s a particular media file of a



To use Nokia Music Manager in Nokia PC Suite, see the Nokia PC Suite user guide.

Nokia PodcastingWith the Nokia Podcasting application (network service), you can search, discover, subscribe to, and download podcasts over the air, and play, manage, and share audio podcasts with your device.


SettingsTo use Nokia Podcasting, you must set your connection and download settings.

Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

Select > Applications > Podcasting > Options > Settings and from the following:

Connection > Default accpoint to define your connthe podcast search servicservice URL.

Download — to edit the dwhether to save your podccard; set how often podcaand date for the next automemory space to use for downloads exceed the do

SearchTo set the search engine tselect > Applications >Settings > Connection >

To search for podcasts, sePodcasting > Search, and

To subscribe to a channelselect Options > Subscribadd them all at the same

DirectoriesDirectories help you to finto subscribe. An episode ipodcast.

M e d i a

oad or Continue download. iple episodes at the same time.

dcast during download or after ect Podcasts and the podcast, ng downloaded, and select .

sts are saved in the Podcasts folder e music library is refreshed.

e podcastsfrom a podcast, open the podcast. can see the file information.

ed episode, select > ayer > Podcasts.

odcast or marked podcasts, for a ions > Update.

y entering the URL of the podcast, odcast. To edit the URL of a Edit.

nd a group of selected podcasts at ark/Unmark, mark the podcasts,

the desired action.

the podcast (network service), eb page.



Select > Applications > Podcasting > Directories. Select a directory folder to update it (network service). When the colour of the folder icon changes, select to open it, and select a folder topic to view the list of podcasts.

To subscribe to a podcast, select the title. After you have subscribed to episodes of a podcast, you can download, manage, and play them in the podcasts menu.

To add a new directory or folder, select Options > New > Web directory or Folder. Select a title, URL of the .opml (outline processor markup language) file, and Done.

To import an .opml file saved in your device, select Options > Import OPML file. Select the location of the file, and import it.

When you receive a message with an .opml file using Bluetooth connectivity, open the file and save it to the Received folder in Directories. Open the folder to subscribe to any of the links to add to your podcasts.

DownloadsTo view the podcasts you have subscribed to, select > Applications > Podcasting > Podcasts. To view individual episode titles, select the podcast title.

To start a download, select the episode title. To download or to continue to download selected or marked episodes,

select Options > DownlYou can download mult

To play a portion of a popartial downloading, selscroll to the episode beiOptions > Play preview

Fully downloaded podcain Music player when th

Play and managTo display the episodes Under each episode, you

To play a fully downloadApplications > Music pl

To update the selected pnew episode, select Opt

To add a new podcast bselect Options > New pselected podcast, select

To update, delete, and seonce, select Options > Mand select Options and

To open the website of select Options > Open w

47

M e d i a

tically search for alternative s > Settings > Alternative n.

adio station when the radio is on, scroll up n when a station is found, select elect a location for the station, select OK.

tations, select Options > ettings of a station, select the

ss the volume keys.

tions, scroll right or left to the

call while listening to the radio. there is an active call.

e background and go to the ions > Play in background.



Some podcasts provide the opportunity to interact with the creators by commenting and voting. To connect to the internet to do this, select Options > View comments.

RadioTo turn on the radio, select > Applications > Radio. To turn the radio off, select Exit.

When you turn on the radio for the first time, a wizard helps you to save local radio stations (network service).

For availability and costs of the visual service and station directory services, contact your service provider.

The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.


The radio supports Radio Data System (RDS) functionality. Radio stations supporting RDS may display information, such as the name of the station. If activated in the settings, RDS also attempts to scan for an alternative frequency for the currently playing station, if the reception is weak.

To set your device automafrequencies, select Optionfrequencies > Auto scan o

Tune and save a rTo start the station searchor down. To save the statioOptions > Save station. Senter the name for it, and

To view the list of saved sStations. To change the sstation and Edit.

Radio functionsTo adjust the volume, pre

If there are any saved stanext or previous stations.

You can make or answer aThe radio is muted when

To listen to the radio in thstandby mode, select Opt

M e d i a

> RealPlayer. To play, select Video r Recently played and a media file

you must first configure your lect > Applications > Settings > Streaming > Network. ontact your service provider.

ot hold the device near your ear peaker is in use, because the extremely loud.

ct with flash files made for mobile lications > Flash Player. To open a e, select it.

can record voice call memos. If you record a phone hear a beeping sound during



View visual contentFor availability and costs, and to subscribe to the service, contact your service provider.

To view visual content of the current station, select Options > Start visual service. Station needs to have visual service ID saved before service can be used.

To end the visual content feed but continue listening to the radio, select Close.

Station directoryTo access the station directory (network service), select Options > Station directory and your location. Radio stations that provide visual content are indicated with . To listen to or save a station, scroll to it, and select Options > Listen or Save.

RealPlayerWith RealPlayer, you can play media files such as video clips saved in the device memory or memory card, or stream media files over the air by opening a streaming link. RealPlayer does not support all file formats or all the variations of file formats.

Select > Applicationsclips, Streaming links, oor a streaming link.

To stream live content, default access point. SeRealPlayer > Options >For more information, c

Warning: Do nwhen the loudsvolume may be

Flash PlayerTo view, play, and interadevices, select > Appfolder or play a flash fil

RecorderWith voice recorder, youconversations and voiceconversation, all partiesrecording.

49

M e d i a



Select > Applications > Recorder. To record a sound clip, select Options > Record sound clip, or select . To listen to the recording, select . Recorded files are saved in the Sound clips folder in Gallery.

I n t e r n e t

rity is displayed during a nsmission between the device and server is encrypted.

ot indicate that the data e gateway and the content server ested resource is stored) is secure. ures the data transmission nd the content server.

e connection, encryption status, erver authentication, select

info.

nds for browsingections, or check boxes, press the

ge while browsing, select Back. to view a chronological list of the rowsing session, select Options > story. Scroll left or right, and select story list is cleared each time a



InternetBrowse the webTo browse web pages, select > Internet > Web, or press and hold 0 in the standby mode.

For availability of services, pricing, and tariffs, contact your service provider.

Important: Use only services that you trust and that offer adequate security and protection against harmful software.

To access web pages, do one of the following:• Select a bookmark from the bookmarks view.• In the bookmarks view, enter the address of the web

page, and select Go to.

BookmarksTo add a bookmark manually, in the bookmarks view, select Options > Bookmark manager > Add bookmark, fill in the fields, and select Options > Save.

Connection secuIf the security indicatorconnection, the data trathe internet gateway or

The security icon does ntransmission between th(or place where the requThe service provider secbetween the gateway a

To view details about thand information about sOptions > Tools > Page

Keys and commaTo open a link, make selscroll key.To go to the previous paIf Back is not available,pages visited during a bNavigation options > Hithe desired page. The hisession is closed.

51

I n t e r n e t

e in Mini map, scroll. When you isappears and the area outlined

can move more quickly to the e. Page overview may not be

w of the current page, press 8. n the page, scroll up or down. and view the desired section of

to share the latest headlines or

y detects if a web page contains a web feed, select Options > d a feed, or click on the link. u have subscribed to, in the eb feeds.

ect it, and Options > Refresh.

ds are updated, select Options >



To save a bookmark while browsing, select Options > Save as bookmark.To retrieve the latest content from the server, select Options > Navigation options > Reload.

To open the browser toolbar, scroll to an empty part of the page, and press and hold the scroll key.

To end the connection and view the browser page offline, select Options > Tools > Disconnect. To stop browsing, select Options > Exit.

Keypad shortcuts while browsing1 — Open your bookmarks.2 — Search for keywords in the current page.3 — Return to the previous page.5 — List all open windows.8 — Show the page overview of the current page. Press 8 again to zoom in and view the desired section of the page.9 — Enter a new web address.0 — Go to the start page.* or # — Zoom the page in or out.

Mini mapMini map helps you navigate web pages that contain large amount of information. When Mini map is on in the browser settings and you scroll through a large web page, Mini map opens and displays an overview of the web page

you are browsing. To movstop scrolling, Mini map din Mini map is displayed.

Page overviewWith Page overview, you desired part of a web pagavailable on all pages.

To show the page overvieTo find the desired spot oPress 8 again to zoom in the page.

Web feedsWeb feeds are widely usedrecent news.

The browser automaticallweb feeds. To subscribe toSubscribe to web feeds anTo view the web feeds yobookmarks view, select W

To update a web feed, sel

To define how the web feeSettings > Web feeds.

I n t e r n e t

taation that is used to store data tried to access or have accessed requiring passwords, empty the

e information or services you have he cache. To empty the cache, rivacy data > Cache.

, select Options > Clear privacy

s to search engines, and find and s, websites, images, and mobile e). For example, you can use the restaurants and shops. You can our device and memory card.

earch.



WidgetsYour device supports widgets. Widgets are small, downloadable web applications that deliver multimedia, news feeds, and other information, such as weather reports, to your device. Installed widgets appear as separate applications in the My own folder in Applications.

You can download widgets using the Download! application or from the web.

The default access point for widgets is the same as in the web browser. When active in the background, some widgets may update information automatically to your device. Using widgets may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

Saved pagesTo save a page while browsing to be able to view it offline, select Options > Tools > Save page.

To view saved pages, in the bookmarks view, select Saved pages. To open a page, select it.

Clear privacy daA cache is a memory loctemporarily. If you haveconfidential informationcache after each use. Thaccessed are stored in tselect Options > Clear p

To clear all privacy datadata > All.

SearchUse Search to get accesconnect to local servicecontent (network servicapplication to find localalso search for data in y

Select > Internet > S

53

P e r s o n a l i s a t i o n

lect the profile and Activate.

nge to silent profile from any standby mode, press and hold #.

elect the profile, Personalise,

tive until a certain time within Timed and the time.

p. 7.



PersonalisationThemesTo change the look of your device display, activate a theme.

Select > Settings > Themes. To view the available themes, select General. The active theme is indicated by a check mark.

To preview a theme, scroll to the theme, and select Options > Preview. To activate the previewed theme, select Set.

In Themes, you can also set the menu view type, set a theme for the standby mode, set a custom wallpaper, personalise the look of the power saver, and select an image shown during a call.

ProfilesIn Profiles, you can adjust and personalise the device tones for different events, environments, or caller groups. You can see the selected profile at the top of the display in the standby mode. If the General profile is in use, only the current date is shown.

Select > Settings > Profiles.

To activate the profile, se

Tip: To quickly chaother profile, in the

To personalise a profile, sand the desired settings.

To set the profile to be acthe next 24 hours, select

See also “Offline profile”,

T i m e m a n a g e m e n t

erent time zone, select select > s > Settings > Time zone and the on in terms of the time difference ich Mean Time (GMT) or Universal . The time and date are set ne and enable your phone to

ing time of received text or or example, GMT -5 denotes the (USA), 5 hours west of Greenwich/

i) GMT +5.5, for Thailand/+7, for Singapore/Malaysia/

Australia (Sydney) GMT +10, T +12.

endar. Press # in month, week, tically highlight the current date.

ntry, select Options > New entry versary entries are repeated every you to keep a list of tasks that you lds, and select Done.



Time managementClockSelect > Office > Clock. To change the clock settings, and to set the time and date, select Options > Settings.

To set the device to show the time in other locations, scroll right to World clock. To add a location, select Options > Add location.

To set your current location, scroll to a location, and select Options > Set as current location. The location is displayed in the clock main view, and the time in your device is changed according to the location selected. Check that the time is correct and matches your time zone.

Alarm clockTo set a new alarm, scroll right to Alarms, and select Options > New alarm. Enter the alarm time, select whether and when the alarm is repeated, and select Done.

Time and dateTo set the correct time zone, time, and date, select the country you are presently in, then enter the local time and date.

When traveling to a diffOffice > Clock > Optiontime zone of your locatiwith respect to GreenwTime Coordinated (UTC)according to the time zodisplay the correct sendmultimedia messages. Ftime zone for New YorkLondon (UK).

Use for India (New DelhIndonesia/Vietnam GMTPhilippines GMT +8, forand for New Zealand GM

CalendarSelect > Office > Calor day views to automa

To add a new calendar eand an entry type. Anniyear. To-do entries help need to do. Fill in the fie

55

O f f i c e a p p l i c a t i o n s

lator. When entering numbers, ess #.

ator has limited accuracy and is ple calculations.

erter. You can convert ngth from one unit to another, o metres.

accuracy and rounding errors

rrency, you need to choose a ur domestic currency) and add f the base currency is always 1. asurement type, and select

. To change the base currency, select Options > Set as base

e rates, scroll to the currency,



Office applicationsActive notesActive notes allows you to create, edit, and view different kinds of notes. You can insert images and videos or sound clips in the notes, link notes to other applications, such as Contacts, and send notes to others.

Select > Office > Active notes.

To create a note, start writing. To insert images, sound or video clips, business cards, web bookmarks, or files, select Options > Insert object and the type of item.

To set the device to show a note when making or receiving a call from a contact, select Options > Settings. To link a note to a contact, open the note, and select Options > Link note to call > Add contacts and the contact.

NotesSelect > Office > Notes.

To write a new note, start writing. To save the note, select Done.

You can save plain text files (.txt format) you receive to Notes.

CalculatorSelect > Office > Calcuto add a decimal point, pr

Note: This calculdesigned for sim

ConverterSelect > Office > Convmeasurements, such as lefor example, from yards t

The converter has limitedmay occur.

Before you can convert cubase currency (usually yoexchange rates. The rate oSelect Currency as the meOptions > Currency ratesscroll to the currency, andcurrency. To add exchangand enter a new rate.


w portable document format (.pdf) application, select > Office >

ed document, select it. To open a ted in the main view, select le, the memory and folder where e file.

ta page, scroll. To move to the next bottom of the page.

t Options > Zoom > In or Out.

ons > Find > Text, and enter the o find the next occurrence, Next.

cument, select Options > Save.



After you insert all the required exchange rates, you can convert currency. In the first amount field, enter the value to be converted. The other amount field changes automatically.

Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared.

Mobile dictionaryUse Dictionary to translate words from one language to another.

Select > Office > Dictionary. English is available by default in your device. You can add two more languages. To add a language, select Options > Languages > Download languages. You can remove languages except English and add new ones. The languages are free of charge, but downloading may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

The display shows abbreviations for source and target languages. To change the source and target language, select Options > Languages > Source and Target.

Enter the word to be translated, and select Translate. To hear the word spoken, select Listen.

Adobe ReaderUse Adobe Reader to viedocuments. To open theAdobe PDF.

Open a .pdf fileTo open a recently viewdocument that is not lisOptions > Browse for fithe file is stored and th

View a documenTo move around within page, scroll down at the

To zoom in or out, selec

To find text, select Optitext you want to find. Tselect Options > Find >

To save a copy of the do

57




QuickofficeTo use the Quickoffice applications, select > Office > Quickoffice.

Not all variations or features of Word, Excel, and PowerPoint file formats are supported.

If you experience problems with the Quickoffice applications, see www.quickoffice.com, or send an e-mail to [email protected].

QuickmanagerWith Quickmanager, you can download software, including updates, upgrades, and other useful applications. You can pay for the downloads in your phone bill or using a credit card.

http://[email protected]

http://www.quickoffice.com

S e t t i n g s

ge the settings for an enhancement and the desired

the slide settings. See “Keypad lock e a voice call”, p. 14, and “Answer

which functions the accelerometer nd activate specific sensor

e device and SIM card settings, des; view certificate details and view and edit security modulesthat restrict calls are in use sed user group, and fixed dialing), the official emergency number evice.

set some of the settings to their d the lock code.rvice) — to change positioning g settings”, p. 30.

.



SettingsVoice commandsTo select the functions to use by voice command, select > Settings > Voice comm.. The voice commands for changing profiles are in the Profiles folder.

To change the voice command for an application, scroll to the application, and select Edit, or Options > Change command. To play the activated voice command, select Options > Playback.

To use voice commands, see “Voice dialling”, p. 15.

Phone settings

GeneralSelect > Settings > Phone sett. > General and from the following:Personalisation — to adjust the display, standby mode, tones (such as ringing tone), language, themes, and voice command settingsDate and time — to set the time and date and the display format

Enhancement — to chanenhancement. Select ansetting.Slide handling — to edit (keyguard)”, p. 10, “Makor reject a call”, p. 15.Sensor settings — to set controls in your device ainteractions.Security — to change thsuch as PIN and lock cocheck authenticity; andWhen security features (such as call barring, clocalls may be possible toprogrammed into your d

Factory settings — to reoriginal values. You neePositioning (network sesettings. See “Positionin

PhoneSee “Call settings”, p. 17

59

S e t t i n g s

ine time for the data call settings affect all access points

ur SIP profile settings manually. s”, p. 19.

) — to view and edit the presence ications, such as push to talk, . You may receive the settings r.d edit session initiation protocol sharing”, p. 18.r edit an XDM profile. cation applications, such as . These enable the service ser information that is saved in anaged by the user, for example ay receive the settings from your figuration settings”, p. 4. and delete configuration s, such as web browsing and

ay require configuration settings. ngs from your service provider. gs”, p. 4.the use of packet data access available if your SIM card ange the settings, you need the



ConnectionSelect > Settings > Phone sett. > Connection and from the following:Bluetooth — to switch Bluetooth technology on or off, and edit Bluetooth settings. See “Bluetooth connection settings”, p. 67.USB — to edit USB settings. See “USB connection”, p. 68.Destinations — to define the connection methods used for reaching a particular destinationPacket data — to select the packet data connection settings. The packet data settings affect all access points using a packet data connection.

• To set the device to register to the packet data network when you are in a network that supports packet data, select Packet data connection > When available. If you select When needed, the device uses a packet data connection only if you start an application or function that needs it.

• To set the access point name to use your device as a modem with your computer, select Access point.

• To enable the use of HSDPA (network service) in UMTS networks, select High speed packet access. When HSDPA support is activated, downloading data such as messages, e-mail, and browser pages through the cellular network may be faster.

Data call — to set the onlconnection. The data call that use a GSM data call.Video sharing — to set yoSee “Video sharing settingPresence (network servicesettings. Connection appluse the presence settingsfrom your service provideSIP settings — to view an(SIP) profiles. See “Video XDM profile — to create oSettings are for communipresence and push to talkprovider to access some uthe network servers but mpush to talk groups. You mservice provider. See “ConConfigurations — to viewcontexts. Certain functionmultimedia messaging, mYou may receive the settiSee “Configuration settinAPN control — to restrict points. This setting is onlysupports the service. To chPIN2 code.

S e t t i n g s



ApplicationsTo view and edit settings of applications installed to your device, select > Settings > Phone sett. > Applications.

SpeechIn Speech, you can select the default language and voice used for reading text messages and adjust the voice properties, such as rate and volume. Select > Settings > Speech.

To view details of a voice, scroll right, scroll to the voice, and select Options > Voice details. To test a voice, scroll to the voice, and select Options > Play voice.

61

D a t a m a n a g e m e n t

ger, select > Settings > Data

tion installing Java applications. If it ask you to download it.n or software package, , and scroll to an installation file. emory card are indicated

ll.e device memory or the memory

ation, and press the scroll key to

, the device shows information the installation. If you are n without a digital signature or e displays a warning. nly if you are sure of the origins plication.



Data managementInstall or remove applicationsYou can install two types of applications to your device:• J2METM applications based on JavaTM technology with

the extension .jad or .jar. PersonalJavaTM applications cannot be installed to your device.

• Other applications and software suitable for the Symbian operating system. The installation files have the .sis or .sisx extension. Only install software specifically designed for your device.

Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java VerifiedTM testing.

Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment or by using Bluetooth technology. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device or a memory card.

To find installed applications, select > Applications > My own.

To open Application manamgr. > App. mgr..

Install an applicaThe .jar file is required foris missing, the device may1. To install an applicatio

select Installation filesApplications on the mwith .

2. Select Options > InstaAlternatively, search thcard, select the applicstart the installation.During the installationabout the progress of installing an applicatiocertification, the devicContinue installation oand contents of the ap


e device memory. See “File sis file is a message attachment, the Messaging inbox.

icationger main view, select Installed are package, and select Options >

nage files and folders in the device y card, select > Office > File

tore device memoryfrom device memory to the nformation from the memory card, ptions > Back up phone memory

rd. You can only back up the device o the same device.

ry card formatted, all data on the card is memory cards are supplied s require formatting.



Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If “Expired certificate” or “Certificate not valid yet” is shown, even if the certificate should be valid, check that the current date and time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.

Java applications may attempt to, for example, establish a data connection or send a message. To edit the permissions of an installed Java application and define which access point the application will use, select Installed apps., scroll to the application, and select Open.

After you install applications to a compatible memory card, installation files (.sis) remain in the device memory. The files may use large amounts of memory and prevent you from storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation files to a compatible PC, then use the file manager to remove the

installation files from thmanager”, p. 62. If the .delete the message from

Remove an applIn the Application manaapps., scroll to the softwUninstall.

File managerTo browse, open, and mamemory or on a memormgr..

Back up and resTo back up information memory card or restore iin File manager, select Oor Restore from mem. camemory and restore it t

Format a memoWhen a memory card ispermanently lost. Somepreformatted and other

63


cted content be revoked. ent renewal of such DRM- in your device. Revocation of not affect the use of content s of DRM or the use of non-DRM-

t (DRM) protected content licence that defines your rights

M-protected content, to back up content, use the backup feature ansfer methods may not transfer be restored with the content for the use of OMA DRM protected emory is formatted. You may

cences in case the files on your

M protected content, both the will be lost if the device memory o lose the licences and the device get corrupted. Losing the ay limit your ability to use the ice again. For more information, ider.



1. In the File manager view, select the memory card.2. Select Options > Memory card options > Format.3. When formatting is complete, enter a name for the

memory card.

Lock or unlock a memory cardTo set a password to help prevent unauthorised use, in the File manager view, select the memory card and Options > Memory card password > Set. Enter and confirm your password. The password can be up to eight characters long.

If you insert another password-protected memory card into your device, you are prompted to enter the password of the card. To unlock the card, select Options > Unlock memory card.

LicencesDigital rights management

Content owners may use different types of digital rights management (DRM) technologies to protect their intellectual property, including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can access content protected with WMDRM, OMA DRM 1.0, and OMA DRM 2.0. If certain DRM software fails to protect the content, content owners may ask that such DRM software's ability

to access new DRM-proteRevocation may also prevprotected content alreadysuch DRM software does protected with other typeprotected content.

Digital rights managemencomes with an associatedto use the content.

If your device has OMA DRboth the licences and theof Nokia PC Suite. Other trthe licences which need toyou to be able to continuecontent after the device malso need to restore the lidevice get corrupted.

If your device has WMDRlicences and the content is formatted. You may alscontent if the files on yourlicences or the content msame content on your devcontact your service prov


eru can connect to a server and ttings for your device, create new nd manage existing server profiles. ration settings from your service ormation management

ager, select > Settings > Data

u install a software update, the device, even to make

ls, until the installation is the device is restarted. Be sure to efore accepting installation of an

pdates may involve the ounts of data through your service tact your service provider for transmission charges.



Some licences may be connected to a specific SIM card, and the protected content can be accessed only if the SIM card is inserted in the device.

To view the licences saved in your device, select > Settings > Data mgr. > Licences.

To view valid licences that are connected to one or more media files, select Valid licences. Group licences, which contain several licences, are indicated with . To view the licences contained in the group licence, select the group licence.

To view invalid licences for which the time period for using the file has exceeded, select Invalid licences. To buy more usage time or extend the usage period for a media file, select an invalid licence and Options > Get new licence. It may not be possible to update licences if service message reception is disabled.

To view licences that are not in use, select Not in use. Unused licenses have no media files connected to them.

To view detailed information such as the validity status and the ability to send the file, scroll to a licence, and select it.

Device managWith device manager yoreceive configuration seserver profiles, or view aYou may receive configuprovider or company infdepartment.

To open the device manmgr. > Device mgr..

Update softwareWarning: If yoyou cannot useemergency calcompleted andback up data bupdate.

Downloading software utransmission of large amprovider's network. Coninformation about data

65


ings, contact your service rmation management



Make sure that the device battery has enough power, or connect the charger before starting the update.

1. Select Options > Check for updates. If an update is available, accept to download it.

2. After a successful download, to install the update, select Now. To start the installation later, select Later.

To start the installation process later, select Options > Install update.

If no server profile has been defined, the device asks you to create one, or if there are several, to select from a list of servers. For server profile settings, contact your service provider.

Configure your deviceYou may receive configuration settings from your service provider or company information management department.

To connect to a server and receive configuration settings for your device, select Options > Server profiles, scroll to the server profile, and select Options > Start configuration.

To edit a server profile, scroll to the profile, and select Options > Edit profile.

For the server profile settprovider or company infodepartment.

C o n n e c t i v i t y

d to your device. The transfer time unt of data. You can stop the e later.

ynchronise contacts, calendar een your device and a compatible

rmation about PC Suite and the pport area on the Nokia website, suite.

nectivitynology enables wireless ectronic devices within a etres (33 feet).

with Bluetooth Specification 2.0 g profiles: Advanced Audio o Remote Control, Basic Imaging, e Transfer, Hands-free, Headset, , Phone Book Access, SIM Access,



ConnectivityTransfer or synchronise dataWith Phone switch, you can copy or synchronise contacts, calendar entries, and possibly other data, such as video clips and images, from a compatible device using a Bluetooth connection.

Depending on the other device, synchronisation may not be possible and data can be copied only once.1. To transfer or synchronise data, select > Settings >

Connectivity > Switch.If you have not used Phone switch before, information about the application is displayed. To start transferring data, select Continue.If you have used Phone switch, select the icon Start sync, Start retrieving or Start sending.

2. When using Bluetooth technology, the devices need to be paired to transfer data.Depending on the type of the other device, an application may be sent and installed on the other device to enable the data transfer. Follow the instructions on the display.

3. Select what content you want to transfer to your device.

4. Content is transferredepends on the amotransfer and continu

PC SuiteWith PC Suite you can sentries, and notes betwPC.

You may find more infodownload link in the suwww.nokia-asia.com/pc

Bluetooth conBluetooth wireless techconnections between elmaximum range of 10 m

This device is compliantsupporting the followinDistribution, Audio/VideDial-Up Networking, FilObject Push, Serial Port

http://www.nokia-asia.com/pcsuite

67


fine a name for your device

able another device, for example, ard of your device using access profile)

is in the remote SIM mode, tible connected enhancement, or receive calls. Your wireless calls, except to the emergency your device, while in this mode. evice, you must first leave the evice has been locked, enter the t.

here the item you want to send

want to send, and select Bluetooth.arch for devices within range. wn with . Some devices may device addresses. To find out the device, enter the code *#2820#

r devices earlier, a list of devices wn. To start a new search, select



Generic Audio/Video Distribution, Generic Access, and Generic Object Exchange. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.

Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.

Do not accept Bluetooth connections from sources you do not trust.

A Bluetooth connection is disconnected automatically after sending or receiving data.

Bluetooth connection settingsSelect > Settings > Connectivity > Bluetooth.

Bluetooth — to switch Bluetooth connectivity on or off

My phone's visibility — to allow your device to be found by other devices with Bluetooth connectivity at all times, select Shown to all. To allow your device to be found for a defined time period, select Define period. For security reasons it is advisable to use the Hidden setting whenever possible.

My phone's name — to de

Remote SIM mode — to ena car kit, to use the SIM cBluetooth technology (SIM

When the wireless deviceyou can only use a compasuch as a car kit, to makedevice will not make any numbers programmed intoTo make calls from your dremote SIM mode. If the dlock code to unlock it firs

Send data1. Open the application w

is saved.2. Scroll to the item you

Options > Send > Via3. The device starts to se

Paired devices are shoshow only the unique unique address of yourin the standby mode.If you have searched fofound previously is shoMore devices.


devices, scroll right to Blocked ice, scroll to the device, and select

using Bluetooth technology, nt to accept the message. If you d in inbox in Messaging.

nble to establish a data connection a compatible PC.

onnectivity > USB and from the

to select the default USB nge the active mode. Select PC ith Nokia PC Suite; Mass storage

serted memory card as a mass ansfer to use the device with a rinter, or Media transfer to such as music, with a compatible dia Player.



4. Select the device with which you want to connect.5. If the other device requires pairing before data can be

transmitted, a tone sounds and you are asked to enter a passcode. Create your own passcode and share the passcode with the owner of the other device. You do not have to memorise the passcode.

Pair and block devicesTo open a list of paired devices, in the Bluetooth view, scroll right to Paired devices.

To pair with a device, select Options > New paired device, select the device with which to pair, and exchange passcodes.

To cancel pairing, scroll to the device whose pairing you want to cancel, and press the clear key. If you want to cancel all pairings, select Options > Delete all.

To set a device to be authorised, scroll to the device, and select Options > Set as authorised. Connections between your device and an authorised device can be made without your knowledge. Use this status only for your own devices to which others do not have access, for example, your PC or devices that belong to someone you trust. is added next to authorised devices in the paired devices view.

To block connections from a device, in the paired devices view, select the device and Block.

To view a list of blockeddevices. To unblock a devDelete.

Receive dataWhen you receive data you are asked if you waaccept, the item is place

USB connectioConnect the USB data cabetween the device and

Select > Settings > Cfollowing:USB connection mode —connection mode or chaSuite to use the device wto access files on the instorage device; Image trPictBridge-compatible psynchronise media files,version of Windows Me

69


subscribtion to the service, ider. Note that roaming services home network services.

service, you must define the PTT TT service settings, contact your

riority over PTT calls.

PTT.

Options > Log in to PTT.

ection.

set to do not disturb (DND).

out from PTT after exiting o log out, select Yes. To keep PTT

select No.

ne call hold the device near your ear eaker is in use, because the xtremely loud.



Ask on connection — to set the device to ask the purpose of the connection each time the cable is connected, select Yes. To set the default mode to be activated automatically, select No.

After transferring data, ensure that it is safe to unplug the USB data cable from the PC.

Remote synchronisationSync enables you to synchronise data such as your calendar entries, contacts, and notes with a compatible computer or a remote internet server.

Select > Settings > Connectivity > Sync.

To create a new profile, select Options > New sync profile and enter the required settings.

To synchronise data, in the main view, mark the data to be synchronised, and select Options > Synchronise.

Push to talkPush to talk (PTT) (network service) is a real-time voice over IP service (network service). PTT provides direct voice communication connected with a single keypress. In PTT communication, one person talks while the others listen. The length of time of each turn is limited.

For availability, costs andcontact your service provmay be more limited than

Before you can use the PTTconnection settings. For Pservice provider.

Phone calls always take p

Select > Applications >

Log in to PTTTo log in manually, select

indicates a PTT conn

indicates that PTT is

Exit PTTSelect Options > Exit. Logapplication? is displayed. Tactive in the background,

Make a one-to-oWarning: Do notwhen the loudspvolume may be e


requestst from Contacts, scroll to a

ions > Send callback request.

anagerger, you can identify the status of etails on the amount of data sent

nused connections.

al invoice for calls and services e provider may vary, depending on

es, rounding off for billing, taxes,

onnectivity > Conn. mgr..

ils, scroll to a connection, tails.

roll to the connection, and select o end all connections, select ll.



1. Select Options > PTT contacts > Contacts, scroll to the contact you want to talk to, and press the call key.

2. When the connection has been established, to talk to the other participant, press and hold the call key while you talk.

3. To end the PTT call, select Disconnect, or, if there are several PTT calls, select Options > Disconnect.

Make a PTT group callTo call a group, select Options > PTT contacts > Contacts > Options > Talk to many, mark the contacts you want to call, and select OK.

PTT sessionsPTT sessions are displayed as call bubbles in the PTT display, giving information about the status of the PTT sessions:

Wait — shown when you press and hold the call key and somebody else is still speaking in the PTT session

Talk — shown when you press and hold the call key and get the permission to speak

Send a callback To send a callback requecontact, and select Opt

Connection mIn the Connection manadata connections, view dand received, and end u

Note: The actufrom your servicnetwork featurand so forth.

Select > Settings > C

To view connection detaand select Options > De

To end a connection, scOptions > Disconnect. TOptions > Disconnect a

71

G e n u i n e E n h a n c e m e n t s

out accessories and

d enhancements out of the .

the power cord of any accessory and pull the plug, not the cord.

nhancements installed in a nd are operating properly.plex car enhancements must be

sonnel only.rs and enhancements approved r. The use of any other types may warranty applying to the phone,



Genuine EnhancementsWarning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For the compatible enhancements related to this mobile phone, please visit www.nokia-asia.com/enhancements.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

A few practical rules abenhancements.• Keep all accessories an

reach of small children• When you disconnect

or enhancement, grasp• Check regularly that e

vehicle are mounted a• Installation of any com

made by qualified perUse only batteries, chargeby the phone manufactureinvalidate any approval orand may be dangerous.

http://www.nokia-asia.com/enhancements

http://www.nokia-asia.com/enhancements

G e n u i n e E n h a n c e m e n t s

th Headset BH-902 modern Nokia Bluetooth Headset r the future. View calls and SMS e glossy black OLED display and

perfect ease. And enjoy clear voice h advanced Digital Signal logy.

CK-300erformance communication.

not only in step with the newest hones and other pocketable he company's automotive

Holder CR-97avigator securely in place in your eatly complements the design of onvenient connection to your



Battery

Important: These battery talk and standby times can only be reached in certain optimized network conditions or surroundings. The actual battery talk and standby times may differ depending on SIM card, features used, battery age and condition, temperatures to which battery is exposed, different network conditions, and many other factors, so that the talk and standby times may be significantly shorter than given here. In addition, ringing tones, handsfree, use in digital mode, and other functions consume the power, and the amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time.

Nokia BluetooWith the distinctive andBH-902, you're all set fonotifications right off thmanage your calls with quality in every call witProcessing (DSP) techno

Nokia Car KitTune your car for high-pNokia Car Kit CK-300 istechnologies in mobile pdevices, it also reflects tknowhow.

Nokia Mobile Keep your Nokia 6210 Ncar. This stylish holder nyour device and offers cmobile charger.

Type Talktime Standby time

BL-5F up to 2.8 hrs up to 231 hrs

73

B a t t e r y a n d c h a r g e r i n f o r m a t i o n

ully charged battery will lose its

ttery between 15°C and 25°C emperatures reduce the capacity y. A device with a hot or cold porarily. Battery performance is peratures well below freezing.

attery. Accidental short- a metallic object such as a coin, onnection of the positive (+) and he battery. (These look like metal s might happen, for example, attery in your pocket or purse. inals may damage the battery or

s in a fire as they may explode. e if damaged. Dispose of al regulations. Please recycle pose as household waste.

n, crush, bend, deform, puncture, . In the event of a battery leak, come in contact with the skin or



Battery and charger informationYour device is powered by a rechargeable battery. The battery intended for use with this device is BL-5F. This device is intended for use when supplied with power from the following chargers: AC-4, AC-5, AC-6, AC-8 or DC-4 chargers. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved battery or charger may present a risk of fire, explosion, leakage, or other hazard.

If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.

Always switch the device off and disconnect the charger before removing the battery.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its

lifetime. If left unused, a fcharge over time.

Always try to keep the ba(59°F and 77°F). Extreme tand lifetime of the batterbattery may not work temparticularly limited in tem

Do not short-circuit the bcircuiting can occur whenclip, or pen causes direct cnegative (-) terminals of tstrips on the battery.) Thiwhen you carry a spare bShort-circuiting the termthe connecting object.

Do not dispose of batterieBatteries may also explodbatteries according to locwhen possible. Do not dis

Do not dismantle, cut, opeor shred cells or batteriesdo not allow the liquid to


authentication

ia batteries for your safety. etting an original Nokia battery, horised Nokia dealer, and inspect g the following steps:

f the steps is not a total assurance e battery. If you have any reason

tery is not an authentic, original ld refrain from using it. e verified, return the battery to the

. When you look at the hologram the label, you should see the

okia connecting hands symbol om one angle and the Nokia riginal Enhancements logo when oking from another angle.



eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help.

Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids.

Improper battery use may result in a fire, explosion, or other hazard. If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged, take it to a service centre for inspection before continuing to use it.

Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children.

Important: Battery talk and standby times are estimates only and depend on signal strength, network conditions, features used, battery age and condition, temperatures to which battery is exposed, use in digital mode, and many other factors. The amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time.

Nokia batteryguidelinesAlways use original NokTo check that you are gpurchase it from an autthe hologram label usin

Successful completion oof the authenticity of thto believe that your batNokia battery, you shouIf authenticity cannot bplace of purchase.Authenticate hologram

1onNfrOlo

75




2. When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokia-asia.com/batterycheck.

http://www.nokia-asia.com/batterycheck

C a r e a n d m a i n t e n a n c e

ice. Paint can clog the moving oper operation. cloth to clean any lenses, such as nsor, and light sensor lenses.d or an approved replacement ed antennas, modifications, d damage the device and may overning radio devices..up of data you want to keep, calendar notes.

rom time to time for optimum off the device and remove the

equally to your device, battery, ment. If any device is not working earest authorised service facility



Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all

types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the devparts and prevent pr

• Use a soft, clean, drycamera, proximity se

• Use only the supplieantenna. Unauthorisor attachments coulviolate regulations g

• Use chargers indoors• Always create a back

such as contacts and• To reset the device f

performance, powerbattery.

These suggestions applycharger, or any enhanceproperly, take it to the nfor service.

77

A d d i t i o n a l s a f e t y i n f o r m a t i o n

snsmitting equipment, including rfere with the functionality of edical devices. Consult a turer of the medical device to uately shielded from external RF

questions. Switch off your device hen any regulations posted in o do so. Hospitals or health care uipment that could be sensitive

es

l devices recommend that a .3 centimetres (6 inches) should

wireless device and an implanted pacemaker or implanted to avoid potential interference ersons who have such devices

ess device more than ches) from the medical device ice is turned on.



Additional safety informationSmall childrenYour device and its enhancements may contain small parts. Keep them out of the reach of small children.

Operating environmentThis device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimetres (5/8 inch) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Medical deviceOperation of any radio trawireless phones, may inteinadequately protected mphysician or the manufacdetermine if they are adeqenergy or if you have any in health care facilities wthese areas instruct you tfacilities may be using eqto external RF energy.

Implanted medical devic

Manufacturers of medicaminimum separation of 15be maintained between a medical device, such as acardioverter defibrillator, with the medical device. Pshould:• Always keep the wirel

15.3 centimetres (6 inwhen the wireless dev


should service the device or install aulty installation or service may be lidate any warranty that may k regularly that all wireless device le is mounted and operating r carry flammable liquids, gases, the same compartment as the ncements. For vehicles equipped er that air bags inflate with great

cts, including installed or portable e area over the air bag or in the air in-vehicle wireless equipment is the air bag inflates, serious injury

flying in aircraft is prohibited. efore boarding an aircraft. The use n an aircraft may be dangerous to craft, disrupt the wireless may be illegal.



• Not carry the wireless device in a breast pocket.• Hold the wireless device to the ear opposite the

medical device to minimise the potential for interference.

• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.

• Read and follow the directions from the manufacturer of their implanted medical device.

If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.

VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added.

Only qualified personnelthe device in a vehicle. Fdangerous and may invaapply to the device. Checequipment in your vehicproperly. Do not store oor explosive materials indevice, its parts, or enhawith an air bag, remembforce. Do not place objewireless equipment in thbag deployment area. Ifimproperly installed andcould result.

Using your device whileSwitch off your device bof wireless teledevices ithe operation of the airtelephone network, and

79


sdevice operates using radio networks, landline networks, med functions. If your device

alls over the internet (internet oth the internet calls and the he device will attempt to make over both the cellular networks r internet call provider if both are ctions in all conditions cannot be should never rely solely on any or essential communications like cies.

all:

switch it on. Check for adequate ding on your device, you may the following: your device uses one. restrictions you have activated

from offline or flight profile rofile.any times as needed to clear the device for calls. rgency number for your present umbers vary by location.



Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.

Emergency callImportant: This signals, wireless and user-programsupports voice ccalls), activate bcellular phone. Temergency calls and through youactivated. Conneguaranteed. Youwireless device fmedical emergen

To make an emergency c

1. If the device is not on,signal strength. Depenalso need to complete• Insert a SIM card if• Remove certain call

in your device.• Change your profile

mode to an active p2. Press the end key as m

display and ready the 3. Enter the official eme

location. Emergency n


ause the device is designed to use to reach the network. That amount number of factors such as how

ork base station. The highest SAR guidelines for use of the device at

s and enhancements may result in R values may vary depending on esting requirements and the al SAR information may be information at www.nokia.com.



4. Press the call key.

When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

Certification information (SAR)This mobile device meets guidelines for exposure to radio waves.

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.

The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below

the maximum value beconly the power required changes depending on aclose you are to a netwvalue under the ICNIRP the ear is 0.91 W/kg.

Use of device accessoriedifferent SAR values. SAnational reporting and tnetwork band. Additionprovided under product

http://www.nokia.com

81

il messages 24

anager 62g locations 33

Player 48arding calls. See diverting calls.

ry 38ine enhancements 71

ssisted GPS 29PS connection 29aps 31

ositioning 29atellites 31rip meter 37

ix

atorsPS light 9

cons 8


IndeAAlarm clocAssisted GP

BBarring paBattery 72Battery inf

type 7Bluetooth

connereceivsendin

Bookmarks

CCache 52Calendar 5Call registeCalls

answebarrinendinginternmakinrejecti


x

k. See clock.S (A-GPS) 29

ssword 12

ormation2

ction settings 67ing data 68g data 67 50

4r. See log.

ring 15g 17 14

ational 14g 14ng 15

speed dial 14waiting 16

Cameracapturing images 41recording video clips 42

Charging battery 2Clock 54Clock settings 54Closing applications 10Compass 32Conference call 15Connection manager 70Connectivity 66Contacts 27

memory consumption 27Converter 55

DData cable. See USB.Date settings 54Device manager 64Dictionary. See mobile dictionary.Diverting calls 17Downloading maps 34

EE-ma

FFile mFindinFlashForw

GGalleGenuGPS

aGmpst

HHelp

IIndic

Gi

io 47lPlayerorder 48ging tones 27video ringing tones 38tes 35

ing locations 34een saver 9vice commands 26tingsclock 54connection 59data call 59date 54messaging 26packet data 59phone 58positioning 30setting wizard 5speech 60time 54writing language 21

ring online 39tware updates 64ed dialling 14ndby theme 7



missed events 9Navi key light 9

KKeyguard. See keypad lock.Keypad lock 10

LLandmarks 34, 36, 37Listening to music 43Locations 34, 36, 37Lock code 3, 11Log 20

MMaps 32Marking items 9Media player. See RealPlayer.Menu 9Messages

listening to 25service messages 24SIM messages 25

Missed events 9Mobile dictionary 56Music player

downloading music 44music shop 44playlists 43transferring music 44

NNavi key light 9Navigating 35Navigation licence 35Nokia Bluetooth Headset BH-902 72Nokia Car Kit CK-300 72Nokia Mobile Holder CR-97 72Notes 55

active notes 55

OOffline mode. See offline profile.Offline profile 8One-touch dial. See speed dialling.Operator selection 18

PPaired devices 68Phonebook. See contacts.PIN 3, 11

module PIN 12signing PIN 12

Position requests 31Positioning 29Profiles 53PTT. See push to talk.PUK 12Push to talk 69

RRadReaRecRin

Rou

SSavScrSerSet

ShaSofSpeSta

83



Status light. See Navi key light.Switching between applications 10Synchronisation 69

TText input 21Themes 53Time settings 54Transferring data 66Transferring music 44Trip meter 37

UUpdating software 64UPIN 11USB 68Using phone without a SIM card 8

VVideo call 16Video sharing 18Voice commands 58Voice dialing 15Voice mailbox 14Voice recorder. See recorder.Volume 10

WWeb

connection security 50feeds 51saving a page 52viewing a saved page 52viewing bookmarks 50

World clock. See clock.Writing text. See text input.

Nokia Care Onlineormation on our

ut more about its features. on using your phone.

our phone.

e and PC. Nokia PC Suite ndar, contacts, music and

obile browsing and email*, sent to your phone free

INTERACTIVE DEMONSTRATIONS


The Nokia Care web support provides you with more infonline services.

INTERACTIVE DEMONSTRATIONSLearn how to set up your phone for the first time, and find oInteractive Demonstrations give step-by-step instructions

USER’S GUIDEThe online User’s Guide contains detailed information on yRemember to check regularly for updates.

SOFTWAREMake the most of your phone with software for your phonconnects your phone and PC so you can manage your caleimages, while other applications complement its use.

SETTINGSCertain phone functions, such as multimedia messaging, mmay require settings before you can use them. Have them of charge.

*Not available on all phones.

SOFTWARE

USER’S GUIDE

SETTINGS


iarise yourself with phone functions

.nokia-asia.com/pcsuite lets you

/software.

ne and other Nokia products and

ts and promotions. Sign up for “Nokia First To Know“ to get exclusive oming events.

www.nokia.com.my/supportwww.nokia.com.ph/supportwww.nokia.com.sg/supportwww.nokia.co.th/support


HOW DO I USE MY PHONE?The Set Up section, at www.nokia-asia.com/setup, helps you prepare your phone for use. Familand features by referring to the Guides and Demos section at www.nokia-asia.com/guides.

HOW DO I SYNCHRONISE MY PHONE AND PC?Connecting your phone to a compatible PC with the requisite Nokia PC Suite version from wwwsynchronise your calendar and contacts.

WHERE CAN I GET SOFTWARE FOR MY PHONE?Get more out of your phone with downloads from the Software section at www.nokia-asia.com

WHERE CAN I FIND ANSWERS TO COMMON QUESTIONS?Look up the FAQ section at www.nokia-asia.com/faq for answers to your questions on your phoservices.

HOW DO I KEEP UP WITH NOKIA NEWS?Subscribe online at www.nokia-asia.com/signup and be the first to know about the latest producConnections“ to receive monthly updates on latest phones and technology. Sign up for “Be Thepreviews of new phone announcements or subscribe to “Promotional Communications“ for upc

Should you still require further assistance, please refer to www.nokia-asia.com/contactus.For additional information on repair services, please visit www.nokia-asia.com/repair.

Please visit your own country site for more details:

Australia and New Zealand www.nokia.com.au/support MalaysiaIndia www.nokia.co.in/support PhilippinesIndonesia www.nokia.co.id/support SingaporeJapan www.nokia.co.jp/support Thailand

If your country is not listed above, please visit www.nokia-asia.com/support.


http://www.nokia-asia.com/setup

http://www.nokia-asia.com/guides

http://www.nokia-asia.com/pcsuite

http://www.nokia-asia.com/software

http://www.nokia-asia.com/faq

http://www.nokia-asia.com/signup

http://www.nokia-asia.com/contactus

http://www.nokia-asia.com/repair

http://www.nokia.com.au/support

http://www.nokia.com.my/support

http://www.nokia.co.in/support

http://www.nokia.com.ph/support

http://www.nokia.co.id/support

http://www.nokia.com.sg/support

http://www.nokia.co.jp/support

http://www.nokia.co.th/support

http://www.nokia-asia.com/support

Date post:	17-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Nokia 6210 Navigator User’s Guidends1.webapps.microsoft.com/files/support/apac/phones/... ·...

Documents