Nokia 6220 Classic User Manual

8/14/2019 Nokia 6220 Classic User Manual

1/98

Nokia 6220 Classic

Users Guide


2/98
http://www.nokia.com/phones/declaration_of_conformity/


3/98


4/98


5/98


6/98


7/98


8/98

S A F E T Y

SAFETY

Read these simple guidelines. Not following them may bedangerous or illegal. Read the complete user guide forfurther information.

SWITCH ON SAFELYDo not switch the deviceon when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all locallaws. Always keep your hands free to operatethe vehicle while driving. Your firstconsideration while driving should be road

safety.INTERFERENCE All wireless devices may besusceptible to interference, which could affectperformance.

SWITCH OFF IN RESTRICTED AREAS Follow

any restrictions. Switch the device off inaircraft near medical equipment fuel

ENHANCEMENTS Aapproved enhancemconnect incompatib

WATER-RESISTANwater-resistant. Ke

About your devThe wireless device described in

use on the GSM 850, 900, 1800and 2100 networks. Contact yoinformation about networks.

When using the features in thirespect local customs, privacy others, including copyrights.

Copyright protection may preve


9/98

trustworthy sources that offer adequate security andprotection against harmful software, such as applicationsthat are Symbian Signed or have passed the Java

Verifiedtesting. Consider installing antivirus and othersecurity software on your device and any connectedcomputer.

Your device may have preinstalled bookmarks and links forthird-party internet sites. You may also access other third-party sites through your device. Third-party sites are notaffiliated with Nokia, and Nokia does not endorse orassume liability for them. If you choose to access suchsites, you should take precautions for security or content.

Warning: To use any features in this device, otherthan the alarm clock, the device must be switched

on. Do not switch the device on when wirelessdevice use may cause interference or danger.

The office applications support common features ofMicrosoft Word, PowerPoint, and Excel (Microsoft Office2000, XP, and 2003). Not all file formats can be viewed ormodified.

Remember to make back-up copies or keep a written

device is not working properlauthorised service facility.

When connecting to any othefor detailed safety instructionincompatible products.

Network servic

To use the phone you must hservice provider. Many of thenetwork features. These featunetworks; other networks maspecific arrangements with yyou can use the network servi

give you instructions and expSome networks may have limcan use network services. For not support all language-depservices.

Your service provider may hav

features be disabled or not ac


10/98

S A F E T Y

This device supports WAP 2.0 protocols (HTTP and SSL) thatrun on TCP/IP protocols. Some features of this device, suchas web browsing, e-mail, push to talk, and multimedia

messaging, require network support for thesetechnologies.

Battery removingAlways switch the device off and disconnect the chargerbefore removing the battery.


11/98

Support

HelpYour device has context-sensitive help. To access helpwhen an application is open, select Options > Help. Toswitch between help and the application that is open in

the background, select and hold , and select from the listof open applications.

To open help from the main menu, select > Help > Help.Select an application to view a list of help topics, andselect the related help text. To open a keyword list, selectOptions > Search.

Software updatesNokia may produce software updates that may offer newfeatures, enhanced functions, or improved performance.

You may be able to request these updates through theN ki S ft U d t PC li ti T d t th

To get more information and Software Updater applicationsoftwareupdate or your local

If software updates over the network, you may also be able

the device.

Downloading software updattransmission of large amountprovider's network. Contact yinformation about data trans

Make sure that the device baconnect the charger before s
http://www.nokia-asia.com/softwareupdatehttp://www.nokia-asia.com/softwareupdatehttp://www.nokia-asia.com/softwareupdatehttp://www.nokia-asia.com/softwareupdate


12/98

G e t s t a r t e d

Get started

Insert a (U)SIM card and batteryThis device uses BP-5M batteries.

1. To open the back cover of the device, with the back of

the device facing you slide the cover toward thebottom of the device (1), and remove it (2). To removethe battery, lift it from the end (3).

2. Slide the (U)SIM card in the SIM card holder (4).

Make sure that the gold-coloured contact area on the

card is facing downward on the device, and thebevelled corner faces toward the card holder slot.

3. Replace the battery (5). Replace the back cover (6).

Memory cardUse only compatible microSD acards approved by Nokia for usdevice. Nokia uses approved ind

for memory cards, but some brafully compatible with this devicdamage the card and the devicethe card.

Insert a memory caNote that the memorycard may be suppliedwith the device, andmay already be inserted.

1 Open the memory

card slot door (1).


13/98

3 Push the card gently to lock it into place. Close tightthe slot door (3).

Remove a memory cardImportant: Do not remove the memory card inthe middle of an operation when the card is beingaccessed. Removing the card in the middle of anoperation may damage the memory card as well

as the device, and data stored on the card may becorrupted.

1 Press briefly the power key.2 Scroll to Remove memory card, and select OK >Yes.3 Open the memory card slot door.4 Push the card gently to release it.

5 Pull the card out, and select OK.6 Close the slot door.

Charge the battery

1 Connect the charger to the wall socket2 Connect the charger plug to the charger connector in

If the battery iscompletely discharged,it may take a few

minutes before thecharging indicatorappears on the displayor before any calls canbe made.

The charging timedepends on the charger and t

Switch the devicPress and hold the power key

If the device asks for a PIN coPIN code, and select OK.

If the device asks for the lock lock code, and select OK. The for the lock code is 12345.

For more information about a"A d " 20


14/98

G e t s t a r t e d

My NokiaMy Nokia is a free service that sends you tips, tricks, and

support for your Nokia device regularly as text messages.If My Nokia is available in your country and supported byyour service provider, your device invites you to join the MyNokia service after you have set the time and the date.

Select the language for the service. If you change thelanguage, the device restarts. To sign-up to My Nokia ,

select Accept and follow the instructions on the display.

To sign-up to My Nokia later, select > Applications >My Nokia.

After the invitation to join My Nokia, the Welcomeapplication starts. With the Welcome application, you can

access the following applications:Sett. wizard Configure connection settings. See"Settings wizard", p. 15.

Switch Copy or synchronise data from other compatibledevices.

Tutorial Learn about the features of your device andhow to use them To start the tutorial later select > Help

Antenna locationsCellular antenna (1)

GPS antenna (2)

Bluetooth antenna (3)

Your device may haveinternal and externalantennas. As with any

radio transmitting device,avoid touching theantenna area unnecessarilywhile the antenna is transmittwith such an antenna affects tand may cause the device to o

level than otherwise needed anlife.

Configuration settBefore you can use multimedia

e-mail synchronisation stream


15/98

setting wizard application to configure the settings. Youmay receive the settings directly as a configurationmessage, which you can save to your device. For more

information on availability, contact your service provideror nearest authorised Nokia dealer.

When you receive a configuration message, and thesettings are not automatically saved and activated, 1 newmessage is displayed. To save the settings, select Show >Options > Save. You may need to enter a PIN codeprovided by the service provider.

Settings wizardThe setting wizard application configures your device foroperator and e-mail settings based on your service

provider. Configuring other settings may also be possible.To use these services, you may have to contact your serviceprovider to activate a data connection or other services.

Select > Settings > Sett. wizard.

Transfer data


16/98

Y o u r d e v i c e

Your device

Keys and partsEarpiece (1)

Secondary cameralens (2)

Light sensor (3)

Display (4)

Left and right selectionkeys (5)

Menu key (6), hereafter

described as "select "Clear key (7)

Call key (8)

End key (9)

Number keys (10)

Navi scroll key

GPS light (12)

My own key (13)

microSD cardslot (14)

Microphone (15)

Micro USBconnector (16)

Chargerconnector (17)

Nokia AV Connector (2.5 mm)

Loudspeaker (19)

Camera flash (20)

Main cameralens (21)

Camera lens cover

opening slide (22)


17/98

Standby modeWhen you have switched on the device, and it is registered

to a network, the device is in the standby mode and readyfor use.

To open a list of most recently dialled numbers, press thecall key.

To use the voice commands or voice dialling, press and hold

the right selection key.To change the profile, press the power key, and select aprofile.

To start a connection to the web, press and hold 0.

To select the view for the standby mode, select >

Settings > Phone sett. > General > Personalisation >Standby mode > Standby theme.

Depending on the selected standby theme, you can selectapplications or events to add to a shortcut list in thestandby mode or the scroll keys. To select the applicationsor events, select > Settings > Phone sett. > General >

Personalisation > Standby mode > Shortcuts

When the offline profile is accellular network are turned ofdevice without a SIM card, an

using the music player. Remedevice when wireless phone u

Important: In the ofor receive any calls, require cellular netwbe possible to the ofprogrammed into yomust first activate thchanging profiles. If enter the lock code.

IndicatorsIcons

or The device is conetwork.

HSDPA (network serv


18/98

Y o u r d e v i c e

You have unread messages in the inbox inMessaging.

You received new e-mail in your remote mailbox.

You have messages waiting to be sent in outbox.

You have missed calls.

Ringing type is set to Silent and Message alert toneand E-mail alert tone are set to Off.

The device keypad is locked.

The loudspeaker is activated.

An alarm is active.

All calls to the device are diverted to anothernumber.

or A headset or a loopset is connected to thedevice.

or or A GPRS packet data connection is active,the connection is on hold, or a connection is available.

or or A packet data connection is active in a partof the network that supports EGPRS; the connection is onhold; a connection is available Your device may not use

A USB connection is ac

Other indicators may also be sh

GPS lightThe GPS light blinks when your a GPS connection, and remainsconnection is established.

Status lightYou can set the light around thto indicate when the device is son for a few second at intervalseconds. To indicate missed eve

for an hour after the missed evTo activate the status light, selsett. > General > PersonalisatStatus light > On.

Screen saver


19/98

MenuIn the menu you can access the functions in your device.

To access the main menu, select .To open an application or a folder, scroll to it, and press thescroll key.

If you change the order of the functions in the menu, theorder may differ from the default order described in thisuser guide.

To mark or unmark an item in applications, press #. To markor unmark several consecutive items, press and hold #, andscroll up or down.

To change the menu view, select Options > Change Menuview and a view type.

To close an application or a folder, select Back and Exit asmany times as needed to return to the standby mode, orselect Options > Exit.

To display and switch between open applications, pressand hold . Scroll to an application, and select it.

Leaving applications running in the background increasesth d d b tt d d th b tt lif

To activate or deactivate the select Loudsp. or Handset.

Warning: Do not ho

when the loudspeakevolume may be extre

My own key

By default, the Maps applicatmy own key. To set another apSettings > Phone sett. > Geown key and an application.

Keypad lock (keyTo lock the keypad in the staselection key and * within 1.5automatically lock the keypa

> Settings > Phone sett. >and SIM card > Keypad auto

and the desired time


20/98

Y o u r d e v i c e

Access codesTo set how your device uses the access codes, select >

Settings > Phone sett. > General > Security > Phone andSIM card.

Lock codeThe lock code (5 digits) helps to lock your device. The preset

code is 12345. Change the code, and set the device torequest the code. If you forget the code and your device islocked, your device will require service and additionalcharges may apply. For more information, contact a NokiaCare point or your device dealer.

When the device or keypad is locked, calls may be possible

to the official emergency number programmed into yourdevice.

PIN codesThe personal identification number (PIN) code or the

universal personal identification number (UPIN) code (4 to

The module PIN is required to acsecurity module. The signing PIsignature. The module PIN and t

with the SIM card if the SIM cait.

PUK codesThe personal unblocking key (P

personal unblocking key (UPUK)to change a blocked PIN code aThe PUK2 code is required to c

If needed, contact your local se

Barring passwordThe barring password (4 digits) barring. You can obtain the pasprovider. If the password is bloprovider.

Remote lock


21/98

Phone and SIM card > Remote phone locking. Themessage can be from 5 to 20 characters long.

To lock your device, send the text message to your mobile

phone number. To open your device later, select Unlock,and enter the lock code.

Download!

Download! (network service) is a mobile content shopavailable on your device.

With Download! you can discover, preview, buy, download,and upgrade content, services, and applications. The itemsare categorised under catalogs and folders provided bydifferent service providers. The available content depends

on your service provider.Select > Applications > Download!.

Download! uses your network services to access the mostup-to-date content. For information on additional itemsavailable through Download!, contact your service

provider or the supplier or manufacturer of the item

Important: Only instother software from applications that are

passed the Java Veri

Connect a compaDo not connectproducts that createan output signal asthis may causedamage to thedevice. Do notconnect any voltagesource to theNokia AV Connector.

When connecting any externother than those approved bydevice, to the Nokia AV Connevolume levels.

Y d i


22/98

Y o u r d e v i c e

To select the default USBconnection mode orchange the active mode,

select > Settings >Connectivity > USB >USB connection modeand the desired mode. Toset whether the defaultmode is activated

automatically, select Ask on connection > No.


23/98

Call functions

To adjust the volume during a call, press the volume keys.

Make a voice call1 In the standby mode, enter the phone number,

including the area code. Press the clear key to removea number.For international calls, press * twice for theinternational prefix (the + character replaces theinternational access code), and enter the country code,area code (omit the leading zero if necessary), and

phone number.2 To call the number, press the call key.3 To end the call, or to cancel the call attempt, press the

end key.

To make a call from Contacts, select > Contacts. Scrollto the desired name; or enter the first letters of the name,and scroll to the desired name To call the number press

Speed diallingSpeed dialling is a quick way numbers from the standby mphone number to the speed d2 keys are reserved for the vo

and set Speed dialling to On

To assign a phone number to> Settings > Speed dial. S

Assign and the contact. To chOptions > Change.

To activate the speed dialling,sett. > Phone > Call > Speed

To call a speed dialling numbdialling key until the call beg

Call mailbox

C a l l f u n c t i o n s


24/98


To define the call mailbox number if no number is set,select > Settings > Call mailbox. Scroll toVoicemailbox (orVideo mailbox), and enter the corresponding

mailbox number. To change the call mailbox number, selectOptions > Change number. Contact your service providerfor the call mailbox number.

Voice dialling

A voice tag is added automatically to all entries inContacts. Use long names, and avoid similar names fordifferent numbers.

Make a voice dialling call

Voice tags are sensitive to background noise. Use voice

tags in a quiet environment.Note: Using voice tags may be difficult in a noisyenvironment or during an emergency, so youshould not rely solely upon voice dialling in allcircumstances.

1 In the standby mode, press and hold the right selection

key

the number; if the result is dialling select another entry

Make a conferenceYour device supports conferencbetween a maximum of six part

1 Make a call to the first part2 To make a call to another pa

New call.3 To create the conference ca

answered, select Options >To add another person to thstep 2, and select Options >conference.

4 To end the conference call,

Answer or reject aTo answer a call, press the call

To mute the ringing tone selec


25/98

select > Settings > Phone sett. > Phone > Call > Rejectcall with message and Message text.

Call waitingDuring a call, to answer the waiting call, press the call key.The first call is put on hold. To switch between the twocalls, select Swap. To end the active call, press the end key.

To activate the call waiting function (network service),

select > Settings > Phone sett. > Phone > Call > Callwaiting > Activate.

Video calls

Make a video callTo make a video call, you may need to have a USIM cardand be within the coverage of a UMTS network. Foravailability of and subscription to video call services,contact your service provider. A video call can only bemade between two parties and when no other voice, video,or data calls are active The video call can be made to a

You have denied video se

1. Enter the phone number iselectVideo call. Or, selecdesired contact, and selec

2. To change between showsound during a video call,Enable video sending or

If you have denied video secall is still charged as a viwith your network operat

3. To end the video call, pres

Answer a video caWhen a video call arrives,

To answer the video call, presimage to be sent to caller? isimage captured by the camerthe caller. Otherwise, video se

If you have denied video send



26/98


Call settings

CallSelect > Settings > Phone sett. > Phone > Call andfrom the following:

Send my caller ID (network service) to display or hideyour phone number from the person to whom you arecalling

Call waiting (network service) See "Call waiting", p. 25.

Reject call with message and Message text See"Answer or reject a call", p. 24.

Own video in recvd. call to set whether you allow tosend your own video image when you receive a video call

Image in video call to select a still image to be shownwhen you deny a video call

Automatic redial to set your device to make a maximumof 10 attempts to connect the call after an unsuccessfulcall attempt

Show call duration and Summary after call to set thed i t di l th ll d ti d i ll d th

Line in use (network service) for making calls and sending shonly if the SIM card supports t

Line change (network service) line selection

Call divert1 Select > Settings > Phon

divert (network service).2 Select which calls you wan

Voice calls.3 Select the desired option. F

calls when your number is bincoming call, select If busy

4 Select Options > Activatewhich you want to divert thoptions can be active at the

Call barring and call diverting ctime.

Call barring


27/98

2 Scroll to the desired barring option, and select Options> Activate. To change the settings, you need thebarring password given by your service provider.

Call barring and call diverting cannot be active at the sametime.

When calls are barred, calls may be possible to certainofficial emergency numbers.

NetworkSelect > Settings > Phone sett. > Phone > Networkand from the following:

Network mode to select which network to use (this isshown only if it is supported by the service provider). If youselect Dual mode, the device uses the GSM or UMTSnetwork automatically.

Operator selection To set the device to search for andautomatically select one of the available networks, selectAutomatic. To select the desired network manually from alist of networks, select Manual. The selected network must

have a roaming agreement with your home network

Video sharingUse video sharing to send live

device to another compatiblecall.

Video sharing requVideo sharing requires a 3G u

telecommunications system (information about network aassociated with this applicatprovider.

To use video sharing you mus

Ensure that your device is

connections. Ensure that both the send

registered to the UMTS ne Ensure you have an active

are within UMTS networkfrom a UMTS network dur

sharing session is discont



28/98


Video sharing settingsA person-to-person connection is also known as a session

initiation protocol (SIP) connection. Before you can usevideo sharing, ask your service provider for the configuredSIP profile to be used in your device.

Select > Settings > Phone sett. > Connection >Videosharing and from the following:

Video sharing to select whether the video sharing is

enabledSIP profile to select a SIP profile

Video saving to set whether the live videos areautomatically saved

Preferred saving memory to select whether to save the

videos to the device memory or to a memory cardCapability alert tone to set an alert tone to sound whenvideo sharing is available during a call

If you know a recipients SIP address, you can save it toContacts. Select > Contacts, the contact, and Options> Edit > Options > Add detail > SIP or Share video. Enterth SIP dd ( @d i ) Y

during a voice call. To shareVideo clip and the clip you

2 The device sends the invitat

saved to Contacts.If necessary, to send the invaddress of the recipient; or select OK.

3 Sharing begins automaticalaccepts the invitation, and

Use the toolbar buttons to 4 To end the sharing session, s

call, press the end key.

Accept an invitatio

Your device rings when you recinvitation shows the senders nYes to begin the sharing sessioand to return to the voice call,

Log


29/98

Note: The actual invoice for calls and servicesfrom your service provider may vary, depending onnetwork features, rounding off for billing, taxes,

and so forth.Note: Some timers, including the life timer, maybe reset during service or software upgrades.

P o s i t i o n i n g


30/98

g

Positioning

You can use applications such as Maps and GPS data tofind out your location, or measure distances andcoordinates. These applications require a GPS connection.

About GPSYour device has an internal GPS receiver.

The Global Positioning System (GPS) is operated by thegovernment of the United States, which is solelyresponsible for its accuracy and maintenance. Theaccuracy of location data can be affected by adjustments

to GPS satellites made by the United States governmentand is subject to change with the United StatesDepartment of Defense civil GPS policy and the FederalRadionavigation Plan. Accuracy can also be affected bypoor satellite geometry. Availability and quality of GPSsignals may be affected by your location, buildings, natural

obstacles and weather conditions The GPS receiver should

data from the GPS receiver andpositioning or navigation.

Assisted GPS

Assisted GPS (A-GPS) is used toover a packet data connection, the coordinates of your currentis receiving signals from satelli

Your network operator may chaaccording to your network sub

service provider for the correctcharges related to the service.

Your device is preconfigured toservice, if no service provider-savailable. The assistance data iA-GPS service server only whendifferent positioning methods


31/98

Set up GPS connection

Positioning settingsSelect > Settings > Phone sett. > General >Positioning and from the following:

Positioning methods to enable or disable differentpositioning methods

Positioning server To define an access point for A-GPS,select Access point. Only a packet data internet accesspoint can be used. Your device asks for the internet accesspoint when GPS is used for the first time.

Notation preferences to define the measurementsystem and coordinate format

Hold your device correctlyWhen using the receiver, from an upright position, movethe device to an angle of about 45 degrees, with anunobstructed view of the sky.

Establishing a GPS connection may take from a couple of

If you are indoors, go outsignal.

If you are outdoors, move

Check that your hand doeof your device. If the weather conditions

may be affected. Some vehicles have tinted

may block the satellite sig

Satellite signal staTo check how many satelliteswhether your device is receiv

> Applications > GPS dat

Satellite status.If your device has found sateis shown in the satellite infordevice has received enough dto calculate the coordinates ogrey.



32/98

When you receive a position request to allow your positioninformation to be sent, select Accept, or to deny therequest, select Reject.

MapsThe map coverage varies by country or region. For example,maps may not be available due to legal restrictions ofcountries or regions. To the maximum extent permitted by

applicable law, Nokia disclaims any and all warranty withrespect to the availability, accuracy, correctness or updateof maps.

About Maps

With Maps, you can see your current location on the map,browse maps for different cities and countries, search foraddresses and different points of interest, plan routes fromone location to another, and save locations as landmarksand send them to compatible devices. You can alsopurchase extra services, such as travel guides, traffic

information and navigation service with voice guidance

Maps uses GPS. See"Positioninpositioning methods used with"Positioning settings", p. 31. Fo

location information, use eithecompatible external GPS receiv

Browse mapsSelect > Maps; or press the key", p. 19.

When you use Maps for the firselect a cellular access point foinformation for your current lodefault access point later, selecSettings > Internet > Networ

To receive a note when your deoutside your home network, seSettings > Internet > Roaminyour network service provider fcosts.

The data transfer indicator shod d th t f d t t


33/98

When you open Maps, the capital city of the country youare in or the location that was saved from your last sessionis shown. The map of the location is also downloaded, if

needed.To establish a GPS connection and zoom in to your lastknown location, press 0, or select Options > My position.

A GPS indicator on the bottom right of thedisplay shows the availability and strength of the satellitesignal. One bar indicates one satellite. When the devicereceives enough data from the satellite to establish a GPSconnection, the bar turns green. Your device must receivesignals from at least four satellites to calculate thecoordinates of your location. After the initial calculation,signals from three satellites may be enough.

To zoom in or out, press * or #. To move on the map, usethe scroll keys. A new map is automatically downloaded ifyou scroll to an area which is not covered by maps alreadydownloaded. See "Download maps", p. 34. The maps arefree of charge, but downloading may involve thetransmission of large amounts of data through your service

provider's network For more information on data

Find locationsTo find a location in the city o

enter the full or partial addresearch field, and press the scanother city, enter the city anSearch.

To find a specific address, selAddresses. Country/Region *

mandatory.To browse through places andyour area, select Options > Scategory.

To find an address saved in CSearch > Addresses > Optio

Save and send locTo save a location to your devselect Add > To places.

To send a location to a compak d l S d If



34/98

View your saved itemsTo view the locations or routes you have saved to your

device, select Options > Favourites > My places orRoutes.

To check which locations you have searched for on themap, select Options > Favourites > History.

To create a collection of your favourite places, selectOptions > Favourites > Collections > New collection.

Enter the name for the collection. To add locations to yourcollection, open My places, scroll to a location, press thescroll key, and select Add > To collection.

Download maps

When you browse a map on the display in Maps, a newmap is automatically downloaded if you scroll to an areawhich is not covered by maps already downloaded. Thedata counter (kB) on the display shows the amount ofnetwork traffic when you browse maps, create routes, orsearch for locations online.

Do nloading maps ma in ol e the transmission of large

> Tools > Settings > InternetNo.

To define the memory to be us

space you want to use for savifiles, select Options > Tools > Sto be used and Maximum memis full, the oldest map data is decan be deleted using Nokia Ma

Nokia Map LoaderNokia Map Loader is PC softwadownload and install maps andinternet to a compatible memoapplication and browse maps aNokia Map Loader, as Nokia M

history information.To install Nokia Map Loader tohttp://maps.nokia.com, and folscreen.

Pl t
http://maps.nokia.com/http://maps.nokia.com/http://maps.nokia.com/http://maps.nokia.com/


35/98

To define the settings for the route, select Options >Settings.

To show the route on the map, select Options > Show

route.To navigate to the destination by car or on foot, if yourhave purchased these extra services, select Options >Start driving or Start walking.

To save the route, select Options > Save route.

Extra services for MapsYou can purchase a navigation licence and downloaddifferent kinds of travel guides to your device. You canpurchase a licence for pedestrian or car navigation andtraffic information service.

Downloading extra services may involve the transmissionof large amounts of data through your service providersnetwork. Contact your service provider for informationabout data transmission charges.

Navigate to the destination

To purchase a licence for pedwith voice guidance, select OWalk. To purchase a licence fo

select Walk. You can pay for tor in your phone bill, if suppo

To start navigating, select a land select Drive to or Walk t

When you use car navigation asks you to select the languagdownload the voice guidance later, in the Maps main view,Settings > Navigation >Voiis not available for pedestrian

To switch between different

navigation, press the scroll keview, Birds-eye view, or Arr

To discard the created route aOptions > Diff. route.

To stop navigating, select Op

T ffi i f ti



36/98

To purchase a licence for the traffic information service,select Options > Extras > Traffic info.

To view information about traffic events, select Options >

Traffic info. The events are shown on the map as trianglesand lines.

To view details of an event, including possible reroutingoptions, select the event and Options > Open.

To update the traffic information, select Update traffic

info.Travel guides

To purchase and download travel guides, or to viewdownloaded ones, select Options > Extras > Guides.

To browse travel guide categories, select a category. If

there are subcategories, select a subcategory.To download a new guide to your device, scroll to thedesired guide, and selectYes. You can pay for the guidesusing a credit card or in your phone bill, if supported byyour service provider.

L d k

To create a new landmark, seleLandmarks > Options > New positioning request for the coo

select Current position. To entmanually, select Enter manual

To add a landmark to preset calandmark, and Options > Add categories to which you want t

To send one or several landmarselect Options > Send. Your recin Inbox in Messaging.

GPS data

GPS data is designed to providinformation to a selected destinabout your location, and travelthe approximate distance and destination.

R t id


37/98

natural obstacles, are ignored. Differences in altitude arenot taken into account when calculating the distance.Route guidance is active only when you move.

To set your trip destination, select Options > Setdestination and a landmark as the destination, or enterthe latitude and longitude coordinates. To clear thedestination, select Stop navigation.

PositionTo save your location as a landmark, select >Applications > GPS data > Position > Options > Saveposition.

Trip meterTo activate trip distance calculation, select >Applications > GPS data > Trip distance > Options >Start. To deactivate it, select Options > Stop. Thecalculated values remain on the display.

To set the trip distance and time and average and

i d t d t t t l l ti

W r i t e t e x t


38/98

Write text

Traditional and predictive textinputWhen you write text, on the display indicatespredictive text input and traditional text input. To set

the predictive text input on or off, press # repeatedly, orpress *, and select Activate predictive text or Predictivetext > Off.

, , or next to the text input indicatorindicates the character case or number mode. To changethe character case, or to change between letter andnumber mode, press # repeatedly.

To change the writing language of your device, select >Settings > Phone sett. > General > Personalisation >Language > Writing language. The writing languageaffects the characters available when writing text and the

di ti t t di ti d N t ll h t il bl

If the next letter you want is opresent one, wait until the cursforward to end the time-out pe

Write with predictive text in1 Press a number key, 29, on

word changes after every kcommon punctuation mark2 When you have finished th

confirm it, scroll forward orIf the word is not correct, tothe dictionary has found on

If the ? character is shown aintended to write is not in thto the dictionary, select Speletters), and select OK. The dictionary. When the dictioword replaces the oldest ad

C f ti i t diti


39/98

To erase a character, press the clear key. To erase morecharacters, press and hold the clear key.

To insert a space, press 0. To move the cursor to the next

line, press 0 three times.

Copy and delete text1 To select letters and words, press and hold #, and at the

same time scroll left or right. To select lines of text,

press and hold #, and at the same time scroll up ordown.

2 To copy the text, press and hold #, and at the same timeselect Copy.To delete the selected text, press the clear key.

3 To insert the text, scroll to the insertion point, press and

hold #, and at the same time select Paste.

M e s s a g i n g


40/98

Messaging

Before you can receive or send messages or e-mail, youmust have the necessary settings and access pointsdefined. Contact your service provider for the settings.

Write and send messagesYour device supports the sending of text messages beyondthe character limit for a single message. Longer messagesare sent as a series of two or more messages. Your serviceprovider may charge accordingly. Characters that useaccents or other marks, and characters from some

language options, take up more space, limiting the numberof characters that can be sent in a single message.

The wireless network may limit the size of MMS messages.If the inserted picture exceeds this limit, the device maymake it smaller so that it can be sent by MMS.

Only devices that have compatible features can receive

d di l lti di Th f

2 In the To field, enter the phaddresses of the recipients, Contacts, press the scroll kea semicolon (;).

3 To enter the subject for a mmessage, scroll down to the

field is not visible for a mulOptions > Message headerselect OK.

4 Scroll down to the message content.When you write a text mes

indicator shows how many the message. For example, still add 10 characters for thof two text messages.To insert an object, such asor a business card, to a mult

th ll k d l


41/98

InboxInbox contains received messages except e-mail and cell

broadcast messages. To read received messages, select> Messaging > Inbox and the message.

To view the list of media objects that are included in themultimedia message, open the message, and selectOptions > Objects.

Your device can receive many kinds of messages, such asoperator logos, business cards, calendar entries, andringing tones. You can save the special message content toyour device. For example, to save a received calendar entryto the calendar, select Options > Save to Calendar.

Note: The picture message function can be used

only if it is supported by your service provider.Only compatible devices that offer picturemessage features can receive and display picturemessages. The appearance of a message may varydepending on the receiving device.

S i

To define whether service mewhether the messages are doselect > Messaging > Opt

message.

E-mailWhen you create a new mailbmailbox replaces New mailbo

mailboxes.

IMAP4 and POP3 Select > Messaging and tmailbox? is displayed. To con

(network service), selectYes, retrieved e-mail messages of

To connect to the mailbox afConnect. When you are onlinto the remote mailbox, select

R t i d d


42/98


43/98

Cell broadcastCheck with your service provider whether cell broadcast

(network service) is available and what the available topicsand related topic numbers are.

Select > Messaging > Options > Cell broadcast. Toactivate the service, select Options > Settings >Reception > On.

Service commandsTo enter and send service commands (also known as USSDcommands) such as activation commands for networkservices to your service provider, select > Messaging >Options > Service commands. To send the command,select Options > Send.

Messaging settings

T i

Multimedia messaTo define multimedia messagaccess point is used and whetretrieved automatically, selec> Settings > Multimedia me

E-mail settingsSelect > Messaging > Opt

Mailboxes, the mailbox and fConnection settings to desuch as the servers and proto

User settings to define usemessages are sent and wheth

Retrieval settings to definwhich parts of the messages messages are retrieved

Automatic retrieval to demessages automatically at senotification is received from

C o n t a c t s


44/98

Contacts

Save and manage contactinformationTo save and manage contact information, such as names,phone numbers, and addresses, select > Contacts.

To add a new contact, select Options > New contact. Fillin the fields you want, and select Done.

To set your device to show contacts in the device memoryand in the SIM card in the list of contacts, select Options> Settings > Contacts to display, and mark Phone

memory and SIM memory.To copy names and numbers from a SIM card to your deviceor vice versa, scroll to the contact (or mark the desiredcontacts), and select Options > Copy > Phone memory orSIM memory.

To view information about the memory consumption of

l O i C i f

When fixed dialling is activatedthe official emergency numberdevice.

To assign default numbers and select it, and select Options >

desired default option, and sele

Contact groupsTo create a contact group so the-mail messages to several rec

select > Contacts. Scroll rigNew group. Enter a name for tgroup. Select Options > Add myou want to add to the group,


45/98

to a group, scroll right to the groups list, and scroll to acontact group. Select Options > Ringing tone and theringing tone for the group. To remove the personal or group

ringing tone, select Default tone as the ringing tone.


46/98


47/98

Edit video clipsTo edit videos in Gallery and create custom video clips,

scroll to a video clip, and select Options >Video editor >Options > Edit video clip.

In the video editor you can see two timelines: video cliptimeline and sound clip timeline. The images, text, andtransitions added to a video are shown on the video cliptimeline. To switch between the timelines, scroll up or

down.

Watch images and video clipson TV

To watch images and video clips on a compatible TV, use acompatible video-out cable, and set the TV-out settings forthe applicable TV system and TV aspect ratio. Select >Settings > Phone sett. > General > Enhancement. Toimprove the image quality of the TV screen, select Flickerfilter > On.

2 Connect theother end of thevideo-out cable

to the Nokia AVConnector ofyour device.

3 Select >Gallery >Images orVideo

clips and the file you wan

Print imagesYou can use the device with aprinter using USB cable.

To print images in Gallery, scOptions > Print.

Print online

G a l l e r y


48/98

can pick them up. Contact your print online serviceprovider for the costs, applicable terms and availableproducts.

To use Print online, you must have at least one printingservice configuration file installed. The files can beobtained from printing service providers that support Printonline.

Order printsYou can only order prints of images that are in .jpegformat.

1 Select > Gallery > Images.2 To mark the images you want to order, press #, and

select Options > Order prints.

3 Select a service provider from the list, and selectOptions > Open. To view the details of the previousorders, select Log.

4 If the service offered is a single shop service, you areconnected to the service provider. Select Preview toview the image before ordering a print. To send your

To check details, such as opstore, select Options > Infoprovider).Select the desired retail picorder, select Options > Ord

Share onlineWith the Share online applicat

images and video clips you havonline albums, weblogs, or otheservices on the web. You can uunfinished posts as drafts and ccontent of the albums. The supvary depending on the online s

To share images and videos onaccount with an online image usually subscribe to such a servservice provider. Contact your sinformation and applicable ter

U l d fil N t


49/98

Upload filesTo upload files, select > Gallery > Images orVideo clips .Mark the files to upload, and Options > Send > Post to

web and a sharing service.

When you select the service, the selected images andvideos are shown in the edit state. You can open and viewthe files, reorganise them, add text to them, or add newfiles.

To cancel the web upload process and save the createdpost as a draft, select Cancel > Save as draft.

To connect to the service and upload the files to the web,select Options > Post to web.

Open online serviceTo view uploaded images and videos in the online serviceand draft and sent entries in your device, select >Internet > Share online. To update a service, scroll to it,and select Options > Update service.

Select Options and from the following:

New post to create a new

The available options may vaprovider.

Share online settinTo edit the share online settiShare online > Options > Sefollowing:

Service providers to view My accounts To create a neAdd new account. To edit anaccount and Options > Edit. the account and the user namaccount.

Application settings to seshown on the display and thetext entries

Advanced to select the defafor polling new content from to be downloaded while roam

C a m e r a

C


50/98

Camera

Your device has two cameras to capture still images andrecord videos. A high resolution main camera is on theback of the device using landscape mode, and a lowerresolution secondary camera is on the front of the deviceusing portrait mode.

Your device supports an image capture resolution of2592x1944 pixels using the main camera. The imageresolution in this guide may appear different.

The images and video clips are saved in correspondingfolders in Gallery.

You can send images and video clips in a multimedia

message, as an e-mail attachment, or by using Bluetoothconnectivity. You can also upload them to a compatibleonline album. See "Share online", p. 48.

Capture images

2 To zoom in or out, press thekeys.To make lighting and colouadjustments before taking aselect from the active toolbSee "Active toolbar", p. 51 a

"Scenes", p. 53.You can lock the focus on apressing the capture key hadown. If the focus was not red focus indicator appearsthe capture key, and press i

3 To take a picture, press the

S d K f di t h


51/98

Secondary camera

1 To activate the secondary camera in the standby mode,keep the lens cover closed, and select > Applications

> Camera. If you have the main camera activated,select Options > Use secondary camera.2 To zoom in or out, scroll up or down.3 To take a picture, press the scroll key.

Active toolbarThe active toolbar provides you with shortcuts to differentitems and settings before capturing an image or recordinga video. Scroll to icons, and select them by pressing thescroll key.

If you want the active toolbar to be visible before and after

capturing an image or recording a video, select Options >Show toolbar. To view the active toolbar only for 5seconds when pressing the scroll key, select Options >Hide toolbar.

In the active toolbar, select from the following:

Switch to video mode ( Switch to image mode)

Keep a safe distance when usflash on people or animals at flash while taking a picture.

Self timer to activate only). Select the self-timer detimer, select Activate.

Sequence mode to ac(images only). See "Capture i

Go to Gallery to open

To customise the toolbar, seletoolbar. You can remove an ichange, add, or move items.

The available options vary depand view you are in.

The setup settings return to tclose the camera.

If you select a new scene, theare replaced by the selected sccan change the setup setting

C a m e r a

L ti i f ti To open the Gallery select G


52/98

Location informationWith geotagging, you can add information about thegeographic location where the image was captured to the

file details of the photograph. You can use this informationin other applications.

To activate geotagging in the camera, select Options >Settings > Record location > On.

When the location information is added to the image

information, is shown at the bottom of the display. Ifno positioning information is available from satellites,is displayed.

If the location information is not available, GPS stays on inthe background for a few minutes. If a satellite connectionis found within that time, all the images captured during

that time are tagged based on the received GPS positioninginformation. See "Still image camera settings", p. 54.

After capturing an imageAfter you capture an image, select the following from the

To open the Gallery, select G If you do not want to keep

( ). To use the image as wallpa

select Options > Set as wa To set the image as a call im

Options > Set as contact c

Capture images in s

You can set the main camera toin a sequence. In the active too> Burst. To capture images, precapture more than six images, key. The number of images capavailable memory.

To use a time interval betweenSequence mode and a time intimages, press the camera key. Tbefore the time ends, press the

After you have captured the im

To switch off the sequence mode in the active toolbar is shown and a tone


53/98

To switch off the sequence mode, in the active toolbar,select Sequence mode > Single shot.

ScenesA scene helps you to find the right colour and lightingsettings for the environment. The settings of each scenehave been set according to a certain style or environment.Scenes are only available in the main camera.

Select the image or video mode, and in the active toolbar,select Scene modes and a scene available for the image orvideo mode.

To make your own scene suitable for a certainenvironment, scroll to User defined, and select Options >Change. To copy the settings of another scene, select

Based on scene mode and the desired scene.

Record videos1 To activate the main camera, open the lens cover. If the

camera is in the image mode, change to video mode. In

is shown and a tone recording has started.To zoom in or out of the supress the volume keys, or, scroll down or up.

3 To stop recording, select Sautomatically saved to thGallery. See "Gallery", p. 4the video clip depends on

To pause recording at any timrecording automatically stopand there are no keypresses wContinue to resume recordin

To make lighting and colour aa video, select from the active

toolbar", p. 51 and "Scenes",

After recording a After you record a video clip, active toolbar (available only

C a m e r a

clips saved in the mp4 file format in a multimedia To select whether to see the ca


54/98

clips saved in the .mp4 file format in a multimediamessage.

To upload the video clip to a compatible online album,select Sign in for Share online ( ).

To open the Gallery, select Go to Gallery ( ). If you do not want to keep the video, select Delete

( ).

Camera settingsThere are two kinds of settings for the still image camera:active toolbar settings and main settings. To use activetoolbar settings, see "Active toolbar", p. 51. The activetoolbar settings return to the default settings after youclose the camera, but the main settings remain the same

until you change them again.

Still image camera settingsTo change the main settings, select Options > Settings.

To set the image resolution (only available in the main

To select whether to see the cacaptured or to continue capturselect Show captured image.

To add GPS location coordinateRecord location > On. Receivitime or the signal may not be a

To allow the zoom increments continuous between digital andselect Extended digital zoom

camera only). To allow the zoothe digital and extended digita(paused). To limit the zoom to quality is maintained, select Of

To return the default values to Restore camera settings.

Video settingsTo change the main setting in v> Settings.

To set the quality of the video

To reduce the effect of the camera shaking when recording


55/98

To reduce the effect of the camera shaking when recordinga video, selectVideo stabilisation > On.

To mute sound recording, select Audio recording > Mute.

To view the first frame of the recorded video clip after therecording stops, select Show captured video. To view thevideo clip from the active toolbar, select Play (maincamera) or Options > Play (secondary camera).

To apply the default values to the camera settings, selectRestore camera settings.

M e d i a

Media


56/98

Media

Music playerWarning: Listen to music at a moderate level.Continuous exposure to high volume may damageyour hearing. Do not hold the device near your earwhen the loudspeaker is in use, because thevolume may be extremely loud.

You can listen to music and podcast episodes also whenthe offline profile is activated. See "Offline profile", p. 17.

For more information about copyright protection, see"Licences", p. 76.

Listen to music or a podcast episode1 Select > Music player.2 To refresh the music library in your device, select

Options > Refresh.

To fast forward or rewind, presright or left.

To skip forward, scroll right. Tothe song or podcast, scroll left.

To skip to the previous song or

within 2 seconds after a song oTo adjust the volume, use the v

To return to the standby mode background, press the end key. standby theme, the currently preturn to the music player, selesong.

Music menuSelect > Music player > Muthe available music. To view al

Create a playlist Nokia Music Store


57/98

Create a playlist

1 Select Options > Create playlist.2 Enter a name for the playlist, and select OK.3 To add songs now, selectYes. To add songs later, select

No.4 Select artists to find the songs you want to include in

the playlist. To add a song, press the scroll key.5 When you have made your selections, select Done. If a

compatible memory card is inserted, the playlist issaved to the memory card.

To add more songs later, when viewing the playlist, selectOptions > Add songs.

Podcast

To view all the podcast episodes available in your device,select > Music player > Podcasts > All episodes.

The podcast episodes have three states; never played,partially played, and completely played. If an episode ispartially played, it plays from the last playback position thenext time it is played. Otherwise, it is played from the

Nokia Music StoreIn the Nokia Music Store (netbrowse, and purchase music

device. To purchase music, yoservice. To check the Nokia Mcountry, visit www.music.nok

To access the Nokia Music Stinternet access point in your Store, select > Music playto Music store.

Transfer musicYou can buy music protectedmusic shops and transfer the

To refresh the library after yoselection in your device, selec> Options > Refresh.

Transfer music from PC

To synchronise music with Wi

M e d i a

music files only using media transfer. A compatible Select > Music player > Pod
http://www.music.nokia.com/http://www.music.nokia.com/http://www.music.nokia.com/http://www.music.nokia.com/http://www.music.nokia.com/http://www.music.nokia.com/


58/98

us c es o y us g ed a t a s e co pat b ememory card needs to be inserted in the device.

To use Nokia Music Manager in Nokia PC Suite, see the

Nokia PC Suite user guide.

Nokia PodcastingWith the Nokia Podcasting application (network service),you can search, discover, subscribe to, and download

podcasts over the air, and play, manage, and share audiopodcasts with your device.

Warning: Listen to music at a moderate level.Continuous exposure to high volume may damageyour hearing. Do not hold the device near your earwhen the loudspeaker is in use, because thevolume may be extremely loud.

SettingsTo use Nokia Podcasting, you must set your connection anddownload settings.

Se ect us c p aye odPodcasting > Options > Settin

Connection > Default access p

point to define your connectiothe podcast search service for service URL.

Download to edit the downlowhether to save your podcasts tcard; set how often podcasts ar

and date for the next automaticmemory space to use for podcadownloads exceed the downloa

Setting the application to retrimay involve the transmission othrough your service provider'sservice provider for informatiocharges.

SearchTo set the search engine to use

To subscribe to a channel and add it to your podcasts, Downloads


59/98

y p ,select Options > Subscribe. You can also mark channels toadd them all at the same time.

DirectoriesDirectories help you to find new podcast episodes to whichto subscribe. An episode is a particular media file of apodcast.

Select > Music player > Podcasts > Options > Go toPodcasting > Directories. Select a directory folder toupdate it (network service). When the colour of the foldericon changes, select to open it, and select a folder topic toview the list of podcasts.

To subscribe to a podcast, select the title. After you have

subscribed to episodes of a podcast, you can download,manage, and play them in the podcasts menu.

To add a new directory or folder, select Options > New >Web directory or Folder. Select a title, URL of the .opml(outline processor markup language) file, and Done.

To import an .opml file saved on your device, select

DownloadsTo see the podcasts you haveMusic player > Podcasts > O

Podcasts. To see individual eppodcast title.

To start a download, select thor to continue to download sselect Options > Download ocan download multiple episod

To play a portion of a podcaspartial downloading, select Ppreview.

Fully downloaded podcasts arwhen the music library is refr

Play and manage pTo display the episodes from Under each episode, you see

To play a fully downloaded ep

M e d i a

To update, delete, and send a group of selected podcasts at The radio supports Radio Data S


60/98

p g p ponce, select Options > Mark/Unmark, mark the podcasts,and select Options and the desired action.

To open the website of the podcast (network service),select Options > Open web page.

Some podcasts provide the opportunity to interact withthe creators by commenting and voting. To connect to theinternet to do this, select Options >View comments.

FM RadioTo open the radio, select > Applications > Radio. Toturn the radio off, select Exit.

When you open the radio for the first time, a wizard helps

you to save local radio stations (network service).To check availability and costs of the visual service andstation directory services, contact your service provider.

The FM radio depends on an antenna other than thewireless device antenna. A compatible headset orenhancement needs to be attached to the device for the

ppRadio stations supporting RDS such as the name of the stationRDS also attempts to scan for athe currently playing station, ifset your device automatically sfrequencies, select Options > Sfrequencies > Auto scan on.

Tune and save a radmanuallyTo start the station search wheor down. To save the station whOptions > Save station. Select

enter the name for it, and selecTo view the list of saved statioStations. To change the settingstation and Edit.

Radio functions

To listen to the radio in the background and go to the RealPlayer does not support a


61/98

standby mode, select Options > Play in background.

View visual contentTo check availability and costs, and to subscribe to theservice, contact your service provider.

To view visual content of the current station, selectOptions > Start visual service. Station needs to havevisual service ID saved before service can be used.

To end the visual content feed but continue listening to theradio, select Close.

Station directoryTo access the station directory (network service), selectOptions > Station directory and your location. Radiostations that provide visual content are indicated with .To listen to or save a station, scroll to it, and select Options> Listen or Save.

variations of file formats.

Select > Applications > R

Video clips, Streaming linksmedia file or a streaming link

To stream live content, you mdefault access point. Select RealPlayer > Options > SettiContact your service provider

Warning: Do not howhen the loudspeakevolume may be extre

Flash PlayerTo view, play, and interact witdevices, select > Applicatifolder or play a flash file, sele

Recorder

M e d i a

Select > Applications > Recorder. To record a sound


62/98

clip, select Options > Record sound clip, or select . Tolisten to the recording, select . Recorded files are savedin the Sound clips folder in Gallery.

Internet


63/98

Internet

Browse the webTo browse web pages, select > Internet > Web, or pressand hold 0 in the standby mode.

Check the availability of services, pricing, and tariffs withyour service provider.

Important: Use only services that you trust andthat offer adequate security and protectionagainst harmful software.

To access web pages, do one of the following:

Select a bookmark from the bookmarks view. In the bookmarks view, enter the address of the web

page, and select Go to.

BookmarksYour device may have preinstalled bookmarks and links for

To add a bookmark manually, Options > Bookmark managthe fields, and select Options

Connection securi

If the security indicator isconnection, the data transmisthe internet gateway or serve

The security icon does not indtransmission between the gat(or place where the requested

The service provider secures tbetween the gateway and the

To view details about the conand information about serverOptions > Tools > Page info

I n t e r n e t

> History to view a chronological list of the pages visited Mini map


64/98

during a browsing session. To choose the desired page,scroll left or right, and select it. The history list is clearedeach time a session is closed.

To save a bookmark while browsing, select Options > Saveas bookmark.

To retrieve the latest content from the server, selectOptions > Navigation options > Reload.

To open the browser toolbar, scroll to an empty part of the

page, and press and hold the scroll key.

To end the connection and view the browser page offline,select Options > Tools > Disconnect. To stop browsing,select Options > Exit.

Keypad shortcuts while browsing

1 Open your bookmarks.

2 Search for keywords in the current page.

3 Return to the previous page.

5 List all open windows.

8 Show the page overview of the current page. Press 8

Mini map helps you navigate wamount of information. When

settings and you scroll through opens and displays an overviewbrowsing. To move in Mini mapscrolling, Mini map disappears Mini map is displayed.

Page overview

With Page overview, you can mdesired part of a web page. Pagavailable on all pages.

To show the page overview of tfind the desired spot on the pa

8 again to zoom in and view thpage.

Web feedsWeb feeds are widely used to s

view the web feeds you have subscribed to, in theb k k i l W b f d

Saved pages


65/98

bookmarks view, select Web feeds.

To update a web feed, select it, and Options > Refresh.

To define how the web feeds are updated, select Options> Settings > Web feeds.

WidgetsYour device supports widgets. Widgets are small,

downloadable web applications that deliver multimedia,news feeds, and other information, such as weatherreports, to your device. Installed widgets appear asseparate applications in the Applications > My ownfolder.

You can download widgets using the Download!

application or from the web.The default access point for widgets is the same as in theweb browser. When active in the background, somewidgets may update information automatically to yourdevice.

p gTo save a page while browsingselect Options > Tools > Sav

To view saved pages, in the bpages. To open a page, select

Clear privacy dataA cache is a memory location

temporarily. If you have triedconfidential information requcache after each use. The infoaccessed are stored in the caselect Options > Clear priva

To clear all privacy data, seledata > All.

SearchUse Search to get access to s

P e r s o n a l i s a t i o n

Personalisation


66/98

Personalisation

ThemesTo change the look of your device display, activate a theme.

Select > Settings > Personalis. > Themes. To see a listof the available themes, select General. The active themeis indicated by a check mark.

To preview a theme, scroll to the theme, and select Options> Preview. To activate the previewed theme, select Set.

In Themes, you can also set the menu view type, set atheme for the standby mode, set a custom wallpaper,personalise the look of the power saver, and select an

image shown during a call.

ProfilesIn Profiles, you can adjust and personalise the device tones

Tip: To quickly change tother profile, in the stan

To personalise a profile, select tthe desired settings.

To set the profile to be active u

the next 24 hours, select TimedSee also "Offline profile", p. 17

Time management


67/98

Time management

ClockSelect > Office > Clock. To change the clock settings,and to set the time and date, select Options > Settings.

To set the device to show the time in other locations, scrollright to World clock. To add a location, select Options >Add location.

To set your current location, scroll to a location, and selectOptions > Set as current location. The location isdisplayed in the clock main view, and the time in yourdevice is changed according to the location selected.

Check that the time is correct and matches your time zone.

Alarm clockTo set a new alarm, scroll right to Alarms, and selectOptions > New alarm. Enter the alarm time, selectwhether and when the alarm is repeated, and select .

To add a new calendar entry, and an entry type. Anniversayear. To-do entries help you tneed to do. Fill in the fields, a

O f f i c e a p p l i c a t i o n s

Office applications


68/98

Office applications

Active notesActive notes allows you to create, edit, and view differentkinds of notes. You can insert images and videos or soundclips in the notes, link notes to other applications, such asContacts, and send notes to others.

Select > Office > Active notes.

To create a note, start writing. To insert images, sound orvideo clips, business cards, web bookmarks, or files, selectOptions > Insert object and the type of item.

To set the device to show a note when making or receiving

a call from a contact, select Options > Settings. To link anote to a contact, select Options > Link note to call >Add contacts and the contact.

Notes

CalculatorSelect > Office > Calculatoto add a decimal point, press #

Note: This calculator designed for simple ca

ConverterSelect > Office > Convertermeasurements such as length f

example, yards to metres.The converter has limited accumay occur.

Before you can convert currencbase currency (usually your domexchange rates. The rate of the

After you insert all the required exchange rates, you canconvert currency In the first amount field enter the value

Adobe Reader


69/98

convert currency. In the first amount field, enter the valueto be converted. The other amount field changesautomatically.

Note: When you change base currency, you mustenter new exchange rates because all previouslyset exchange rates are cleared.

Mobile dictionaryUse Dictionary to translate words from one language toanother.

Select > Office > Dictionary. English is available bydefault in your device. You can add two more languages.To add a language, select Options > Languages >

Download languages. You can remove languages exceptEnglish and add new ones. The languages are free ofcharge, but downloading may involve the transmission oflarge amounts of data through your service provider'snetwork. Contact your service provider for informationabout data transmission charges.

Use Adobe Reader to view p(.pdf) documents. To open the

Office > Adobe PDF.

Open a .pdf fileTo open a recently viewed dodocument that is not listed in

Options > Browse for file, ththe file is stored and the file.

View a documentTo move around within a pag

page, scroll down at the bottTo zoom in or out, select Opt

To find text, select Options >text you want to find. To findOptions > Find > Next.

O f f i c e a p p l i c a t i o n s

View mode > Full screen to open documents in fullscreen mode


70/98

screen mode

Save settings on exit >Yes to save the settings asdefault when you exit Adobe Reader

QuickofficeTo use the Quickoffice applications, select > Office >Quickoffice.

To view a list of Word, Excel, and PowerPoint documents,scroll right or left to the Quickword, Quicksheet, orQuickpoint view. For example, available Microsoft Worddocuments are listed in the Quickword view. Not allvariations or features of Word, Excel, and PowerPoint fileformats are supported.

To open a file in its respective application, select it.

If you experience problems with the Quickofficeapplications, visit www.quickoffice.com, or send an e-mailto [email protected].

Settings
http://www.quickoffice.com/http://www.quickoffice.com/http://www.quickoffice.com/http://www.quickoffice.com/


71/98

g

Voice commandsTo select the functions to use by voice command, select

> Settings >Voice comm.. The voice commands forchanging profiles are in the Profiles folder.

To change the voice command for an application, selectOptions > Change command and the application. To playthe activated voice command, select Options > Playback.

To use voice commands, see "Voice dialling", p. 24.

Phone settingsGeneralSelect > Settings > Phone sett. > General and from thefollowing:

Personalisation to adjust the display, standby mode,

Enhancement to change tenhancement. Select an enhasetting.

My own key to change a sSee "Standby mode", p. 17.

Security to change the devsuch as PIN and lock codes; vcheck authenticity; and view

When security features that as call barring, closed user grmay be possible to the officia

programmed into your deviceImportant: Even if tthe risks involved in software installationmust be used correctincreased security. T

S e t t i n g s

restricted lifetime. If "Expired certificate" or"Certificate not valid yet" is shown even if the

Packet data to select the pasettings The packet data settin


72/98

Certificate not valid yet is shown, even if thecertificate should be valid, check that the currentdate and time in your device are correct.

Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongsto the listed owner.

Factory settings to reset some of the settings to their

original values. You need the lock code.Positioning (network service) to change positioningsettings. See "Positioning settings", p. 31.

Phone

See "Call settings", p. 26.

ConnectionSelect > Settings > Phone sett. > Connection and fromthe following:

settings. The packet data settinusing a packet data connection

To set the device to regisnetwork when you are inpacket data, select Packeavailable. If you select Wuses a packet data conneapplication or function t

To set the access point namodem with your compu

To enable the use of HSDUMTS networks, select HWhen HSDPA support is asuch as messages, e-maithrough the cellular netw

Data call to set the online tconnection. The data call settinthat use a GSM data call.

Video sharing to set your SISee "Video sharing settings", p

XDM porfile to create or edit an XDM profile. Settingsare for communication applications, such as presence and

Speech


73/98

are for communication applications, such as presence andpush to talk. These enable the service provider to accesssome user information that is saved in the network servers

but managed by the user, for example push to talk groups.You may receive the settings from your service provider.See "Configuration settings", p. 14.

Configurations to view and delete configurationcontexts. Certain functions, such as web browsing andmultimedia messaging, may require configuration settings.You may receive the settings from your service provider.See "Configuration settings", p. 14.

APN control to restrict the use of packet data accesspoints. This setting is only available if your SIM cardsupports the service. To change the settings, you need the

PIN2 code.

ApplicationsTo view and edit settings of applications installed to yourdevice, select > Settings > Phone sett. > Applications.

In Speech, you can select theused for reading text messag

properties, such as rate and voSpeech.

To view details of a voice, scrand select Options >Voice dto the voice, and select Optio

D a t a m a n a g e m e n t

Data management


74/98

g

Install or remove applicationsYou can install two types of applications to your device:

J2METM applications based on JavaTM technology withthe extension .jad or .jar. PersonalJavaTM applicationscannot be installed on your device.

Other applications and software suitable for theSymbian operating system. The installation files havethe .sis or .sisx extension. Only install softwarespecifically designed for your device.

Important: Only install and use applications andother software from trusted sources, such asapplications that are Symbian Signed or havepassed the Java VerifiedTM testing.

Installation files may be transferred to your device from acompatible computer, downloaded during browsing, orsent to you in a multimedia message, as an e-mail

To open Application manager, smgr. > App. mgr..

Install an applicatioThe .jar file is required for insta

is missing, the device may ask 1 To install an application or

Installation files, and scrolApplications on the memorwith .

2 Select Options > Install.

Alternatively, search the devcard, select the application,start the installation.During the installation, the about the progress of the ininstalling an application wi

Java applications may attempt to, for example, establish adata connection or send a message. To edit the permissions

Back up and resto


75/98

g pof an installed Java application and define which accesspoint the application will use, select Installed apps., scroll

to the application, and select Open.

After you install applications to a compatible memorycard, installation files (.sis) remain in the device memory.The files may use large amounts of memory and preventyou from storing other files. To maintain sufficientmemory, use Nokia PC Suite to back up installation files toa compatible PC, then use the file manager to remove theinstallation files from the device memory. See "Filemanager", p. 75. If the .sis file is a message attachment,delete the message from the Messaging inbox.

Remove an applicationIn the Application manager main view, select Installedapps., scroll to the software package, and select Options >Uninstall.

To back up information from memory card or restore inform

in File manager, select Optionor Restore from mem. card. device memory and restore it

Format a memory

When a memory card is formpermanently lost. Some mempreformatted and others requ

1 In the File manager view, 2 Select Options > Memory3 When formatting is comp

memory card.

Lock or unlock a mTo set a password to help prevFile manager view, select the


76/98

To view detailed information such as the validity statusand the ability to send the file, scroll to a licence, and

Make sure that the device baconnect the charger before s


77/98

select it.

Device managerWith device manager you can connect to a server andreceive configuration settings for your device, create newserver profiles, or view and manage existing server profiles.You may receive configuration settings from your serviceprovider or company information managementdepartment.

To open the device manager, select > Settings > Datamgr. > Device mgr..

Update softwareWarning: If you install a software update, youcannot use the device, even to make emergencycalls, until the installation is completed and thedevice is restarted. Be sure to back up data before

1 Select Options > Check favailable, accept to down

2 After a successful downloselect Now. To start the in

To start the installation proceInstall update.

If no server profile has been d

create one, or if there are sevservers. Contact your service settings.

Configure your de

You may receive configuratioprovider or company informadepartment.

To connect to a server and refor your device, select Optionthe server profile, and select

C o n n e c t i v i t y

Connectivity


78/98

Data transferWith data transfer you can copy or synchronise contacts,calendar entries, and possibly other data, such as videoclips and images, from a compatible device using aBluetooth connection.

Depending on the other device, synchronisation may notbe possible and data can be copied only once.

1 To transfer or synchronise data, select > Settings >Connectivity > Switch.If you have not used Switch before, information aboutthe application is displayed. To start transferring data,select Continue.If you have used Switch, select the icon Start sync,Start retrieving or Start sending.

2 When using Bluetooth technology, the devices need tobe paired in order to transfer data.

4 Content is transferred to yodepends on the amount of transfer and continue later.

PC Suite

With PC Suite you can synchroentries, and notes between youPC.

You may find more informationdownload link in the support a

www.nokia-asia.com/pcsuite.

Bluetooth connecBluetooth wireless technology connections between electroni

Phone Book Access, Generic Audio/Video Distribution,Generic Access, and Generic Object Exchange. To ensure

Remote SIM mode > On texample, a car kit, to use the S
http://www.nokia-asia.com/pcsuitehttp://www.nokia-asia.com/pcsuitehttp://www.nokia-asia.com/pcsuitehttp://www.nokia-asia.com/pcsuite


79/98

interoperability between other devices supportingBluetooth technology, use Nokia approved enhancements

for this model. Check with the manufacturers of otherdevices to determine their compatibility with this device.

Features using Bluetooth technology, or allowing suchfeatures to run in the background while using otherfeatures, increase the demand on battery power andreduce the battery life.

Do not accept Bluetooth connections from sources you donot trust.

A Bluetooth connection is disconnected automaticallyafter sending or receiving data.

Bluetooth connection settingsSelect > Settings > Connectivity > Bluetooth.

Bluetooth to switch Bluetooth connectivity on or off

My phone's visibility > Shown to all to allow yourdevice to be found by other devices with Bluetooth

Bluetooth technology (SIM ac

When the wireless device is ican only use a compatible coas a car kit, to make or receivwill not make any calls, excepprogrammed into your devicecalls from your device, you mumode. If the device has been lunlock it first.

Send data1 Open the application whe

is saved.

2 Scroll to the item you wan> Send >Via Bluetooth.

3 The device starts to searcPaired devices are shown show only the unique devunique address of your dev

C o n n e c t i v i t y

5 If the other device requires pairing before data can betransmitted, a tone sounds and you are asked to enter

To view a list of blocked devicedevices. To unblock a device, sc


80/98

a passcode. Create your own passcode and share thepasscode with the owner of the other device. You do

not have to memorise the passcode.

Pair and block devicesTo open a list of paired devices, in the Bluetooth view,scroll right to Paired devices.

To pair with a device, select Options > New paired device,select the device with which to pair, and exchangepasscodes.

To cancel pairing, scroll to the device whose pairing youwant to cancel, and press the clear key. If you want tocancel all pairings, select Options > Delete all.

To set a device to be authorised, scroll to the device, andselect Options > Set as authorised. Connections betweenyour device and an authorised device can be made withoutyour knowledge. Use this status only for your own devicesto which others do not have access, for example, your PC

Delete.

Receive dataWhen you receive data using Bare asked if you want to accept the item is placed in inbox in M

USB connectionConnect the USB data cable to between the device and a com

Select > Settings > Connecfollowing:

USB connection mode to seconnection mode or change thSuite to use the device with Noto access files on the inserted storage device; Image transfer

Yes. To set the default mode to be activated automatically,select No.

To check availability and costservice, contact your service

i b li i d


81/98

Date post:	30-May-2018
Category:	Documents
Upload:	mugu
View:	237 times
Download:	0 times

Nokia 6220 Classic User Manual

Documents