- 1. Nokia Car Kit CK-300User and Installation Guide 9202247
Issue 1 EN
2. DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION, declares
that this HF-21W product is in compliance with theessential
requirements and other relevant provisions of Directive 1999/5/EC.
The product isin conformity with the limits defined in Directive
2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph
6.5, 6.6, 6.8 and 6.9. A copy of the Declaration of Conformity can
befound at
http://www.nokia.com/phones/declaration_of_conformity/.0434 2008
Nokia. All rights reserved.Reproduction, transfer, distribution or
storage of part or all of the contents of this documentin any form
without the prior written permission of Nokia is prohibited.Nokia,
Nokia Connecting People, and Navi are trademarks or registered
trademarks of NokiaCorporation. Other product and company names
mentioned herein may be trademarks ortradenames of their respective
owners.Bluetooth is a registered trademark of Bluetooth SIG,
Inc.Nokia operates a policy of ongoing development. Nokia reserves
the right to make changesand improvements to any of the products
described in this document without prior notice.Under no
circumstances shall Nokia be responsible for any loss of data or
income or anyspecial, incidental, consequential or indirect damages
howsoever caused.The contents of this document are provided as is.
Except as required by applicable law, nowarranties of any kind,
either express or implied, including, but not limited to, the
impliedwarranties of merchantability and fitness for a particular
purpose, are made in relation to theaccuracy, reliability or
contents of this document. Nokia reserves the right to revise
thisdocument or withdraw it at any time without prior notice.The
availability of particular products may vary by region. Please
check with the Nokia dealernearest to you.Export ControlsThis
device may contain commodities, technology or software subject to
export laws andregulations from the US and other countries.
Diversion contrary to law is prohibited.9202247 / Issue 1 EN 3.
ContentsFor your safety ......................... 4 Mute or unmute
the microphone ...16Switch a call between car kitQuick
start................................ 5 and mobile device
............................... 17Set
up........................................................ 5Connect
a mobile device ................... 17Input device
............................................ 5Listen to music
..................................... 17Operation without CarMenu
.............. 6 Voice dialing key ................................
6 4. Troubleshooting.................. 18 Mute
key............................................... 6Connection
issues................................ 18 Mode key
.............................................. 6Audio issues
.......................................... 18 Call
key.................................................. 6 Other
issues........................................... 20 End
key.................................................. 65.
Installation.......................... 21 Navi wheel
........................................... 6Safety information
.............................. 21Operation with CarMenu
.................... 7Connection
options............................. 22 Install CarMenu
.................................. 7 Bluetooth connection
..................... 22 Use CarMenu Cable connection
............................. 23 with the input
device........................ 8Charge the connected
device........... 10Integration with a car stereo system
................................................. 231. Introduction
....................... 11Install the car kit in a vehicle
.......... 30 Hands-free unit HF-21W............... 312. Get
started.......................... 12Input device CU-10
......................... 32Parts
........................................................
12Microphone MP-2............................ 32Switch the car kit
on or off .............. 12 Connectivity cable CA-113CU...... 33
Switch on ........................................... 13System
cable CA-139 ..................... 33 Switch
off........................................... 13Mobile
holder.................................... 34Pair and connect a
mobile device... 13Optional enhancements..................... 34
Bluetooth wireless technology..... 13 Antenna coupler andConnect
your music playerexternal antenna..............................
35to the car kit ......................................... 15Check
the operation ofthe car kit
.............................................. 353. Use without
CarMenu........ 16Answer a call
........................................ 16 Care and maintenance
........... 36End a call
............................................... 16Make a call
............................................ 16 Additional safety
information 37 Call the last dialed number........... 16 Voice
dialing...................................... 16Adjust volume
during a call ............. 163 4. For your safetyFor your
safetyRead these simple guidelines. Not following them may be
dangerous or illegal.Read the complete guide for further
information.Your device and its enhancements may contain small
parts. Keep them out ofreach of small children.SWITCH ON SAFELYDo
not switch the device on when wireless phone use is prohibited
orwhen it may cause interference or danger.ROAD SAFETY COMES
FIRSTObey all local laws. Always keep your hands free to operate
thevehicle while driving. Your first consideration while driving
should beroad safety.INTERFERENCEAll wireless devices may be
susceptible to interference, which couldaffect performance.SWITCH
OFF WHEN REFUELINGDo not use the device at a refueling point. Do
not use near fuel orchemicals.SWITCH OFF NEAR BLASTINGFollow any
restrictions. Do not use the device where blasting is
inprogress.QUALIFIED SERVICEOnly qualified personnel may install or
repair this product.ENHANCEMENTSUse only approved enhancements. Do
not connect incompatibleproducts.CONNECTING TO OTHER DEVICESWhen
connecting to any other device, read its user guide for
detailedsafety instructions. Do not connect incompatible products.4
5. Quick startQuick startThank you for choosing the Nokia Car Kit
CK-300. With the car kit, youcan conveniently make and receive
hands-free calls and listen to musicstored on your mobile device
through your car stereo system.This chapter describes the basic
features of the car kit. For details, referto the respective
sections in this guide. Set up1. Have the car kit installed by a
qualified service technician using theoriginal Nokia parts supplied
in the sales package. For instructions,see Installation, p. 21.2.
If you want to operate the car kit through a user interface
optimizedfor car use, download the CarMenu application from the
productpage at www.nokia.com or your local Nokia website, and
install theapplication on your compatible mobile device.3. Connect
your compatible mobile device to the car kit usingBluetooth
wireless technology. For instructions, see Pair andconnect a mobile
device, p. 13. Input device1. Voice dialing key2. Mute key3. Mode
key4. Call key5. End key6. NaviTM wheel5 6. Quick start Operation
without CarMenuYou can operate the car kit with or without the
CarMenu application.This section describes how you can use the
input device when CarMenuis not installed on your mobile
device.Voice dialing keyPress and hold the voice dialing key to
activate voice dialing on acompatible mobile device when no call is
in progress.Mute keyPress the mute key to switch a call between the
car kit and a compatiblemobile device.Press and hold the mute key
to mute or unmute the microphone duringa call.Mode keyPress the
mode key to start, pause, or resume music playback when themusic
player of your mobile device is active.Call keyPress the call key
to answer a call.Press the call key twice to redial the last
dialled number.End keyPress the end key to end the active call or
reject an incoming call.Navi wheelPress and hold the wheel to do
the following: Switch the car kit on or off when the ignition sense
wire is not connected Connect the car kit to a paired device (press
and hold the wheel for about 1 second)6 7. Quick startTurn the
wheel to do the following: Adjust the volume during a call Skip to
the next or previous track of a playlist, artist, or album when a
track is playing or paused Operation with CarMenuIf you want to
operate the car kit through a user interface optimized forcar use,
download the CarMenu application from the product page
atwww.nokia.com or your local Nokia website, and install the
applicationon your compatible mobile device. Also read the CarMenu
user guide onthe CD-ROM.You can use the Nokia Maps application with
CarMenu if Nokia Maps isinstalled on your mobile device.Install
CarMenuFor the installation, you may need the administrator rights
for your PC.You also need the following: A compatible mobile device
based on Series 60 version 3.0 (or higher). The device must support
the Bluetooth specification and profiles described in Bluetooth
wireless technology, p. 13. An Internet connection from your PC or
mobile device. Contact your service provider for information about
data transmission charges. Three megabytes of free memory in your
mobile device The USB cable that is supplied with your mobile
device A compatible PC with the Windows XP or Windows Vista
operating systemTo install CarMenu to your mobile device, do the
following:1. If you want to install CarMenu on a compatible memory
card that you use with your mobile device, insert the card in the
device.2. If you use a PC for the Internet connection, place the
supplied CD-ROM in the CD-ROM drive (or a compatible DVD drive) on
your PC,and select the CarMenu download option in the program that
starts7 8. Quick startautomatically (if the CD-ROM autorun feature
is set to on inWindows). Follow the displayed instructions to
download theCarMenu installation file from the Nokia website to the
PC, and copythe file from the PC to your mobile device or the
memory cardinserted in it. You can also download the file from the
product pageat www.nokia.com or your local Nokia website without
using theCD-ROM.If you use the web browser of your compatible
mobile device for theInternet connection, download the CarMenu
installation file fromthe product page at www.nokia.com or your
local Nokia website toyour mobile device or the memory card
inserted in it.3. Start the installation as described in the user
guide of your mobiledevice, and follow the instructions shown in
the installation program.4. To launch the CarMenu application,
switch on the car kit.Use CarMenu with the input deviceVoice
dialing keyPress and hold the voice dialing key to activate voice
dialing on acompatible mobile device when no call is in progress.In
Nokia Maps, pressing the voice dialing key performs the
samefunction as when you press the 4 key on your mobile device.
Ifnavigation is active, the last voice instruction is repeated.Mute
keyPress the mute key to do the following: Switch a call between
the car kit and a compatible mobile device Set the car kit volume
to silent when no call is in progressPress and hold the mute key to
mute or unmute the microphone duringa call.Mode keyPress the mode
key to do the following:8 9. Quick start Switch between the phone
and music player mode and Nokia Maps (if running) Return to the
main screen of the current modePress and hold the mode key to
return to the main screen of the phonemode from any mode.Call keyIn
the phone mode, press the call key to do the following: Answer a
call Switch between an active call and a call on hold View the list
of last dialled numbers in the main screenIn the phone mode, press
the call key twice to redial the last diallednumber in the main
screen.In the music player mode, press the call key to do the
following: Play the track displayed on your mobile device or pause
or resume playing Play all the tracks of the selected playlist,
artist, or album starting from the first trackIn Nokia Maps,
pressing the call key performs the same function aswhen you press
the left selection key on your mobile device.End keyPress the end
key to do the following: End the active call or reject a call Clear
a calendar note from the screen Return to the previous screen or
menu level Delete a single character when you write text or numbers
Stop playing the displayed track in the main screen of the
musicplayer mode In Nokia Maps, pressing the end key performs the
same function as when you press the right selection key on your
mobile device 9 10. Quick startPress and hold the end key to exit
to the main screen of the currentmode.Navi wheelPress the wheel to
do the following: Answer an incoming call Perform the function
shown at the bottom of the screen, to select anitem (such as a menu
function), or to clear a calendar note from thescreen In Nokia
Maps, pressing the Navi wheel performs the same function as when
you press the middle selection key or the middle of the scroll key
on your mobile devicePress and hold the wheel to do the following:
Switch the car kit on or off when the ignition sense wire is not
connected Connect the car kit to a paired device (press and hold
the wheel for about 1 second)Turn the wheel to either direction to
do the following: Scroll to an item (such as a menu function) or
through a list Adjust the volume during a call In the music player
mode, skip to the next or previous track of a playlist, artist, or
album when a track is playing or paused In Nokia Maps, turning the
wheel performs the same function as when you press the scroll key
up or down on your mobile deviceTurn the wheel left in the main
screen to enter a phone number or usespeed dialing.Turn the wheel
right in the main screen to search for a contact inContacts. Charge
the connected deviceTo charge the battery in your compatible Nokia
device while using thecar kit, connect the device to the car kit
using the connectivity cableCA-113CU.10 11. Introduction1.
IntroductionWith the Nokia Car Kit CK-300, you can conveniently
manage hands-free calls and listen to music stored on your
compatible mobile device.You can control the car kit using the
external input device.If you have a mobile device based on the
Series 60 software platformversion 3.0 (or higher), you can install
the CarMenu application to yourmobile device. CarMenu gives you
instant access to all your contactsand music tracks saved on your
compatible mobile device. You can alsouse it with the Nokia Maps
application (if installed on your mobiledevice).Read this guide
carefully. Also read the user guide for your mobiledevice, which
provides important safety and maintenance information,and the user
guide for CarMenu and Nokia Maps. If you use a separatemusic player
with the car kit, read its user guide as well.Check
www.nokia.com/support or your local Nokia website for the
latestversion of this guide, additional information, downloads, and
servicesrelated to your Nokia product.Some mobile devices may not
support all the functions described in thisguide.Keep all
enhancements out of the reach of small children. 11 12. Get
started2. Get started PartsThe car kit contains the following
parts:1. Hands-free unit HF-21W2. Loudspeaker SP-3 (not included in
all sales packages)3. Connectivity cable CA-113CU. The sales
package may also containother connectivity cables.4. Input device
CU-105. Microphone MP-26. CD-ROM that contains the CarMenu
application and this guide Switch the car kit on or offIf you are
not certain whether the ignition sense wire is connected ornot,
consult with the technician who installed the car kit.12 13. Get
startedSwitch onIf the ignition sense wire is connected, turn on
the car ignition. Whenthe car kit is switched on, the CarMenu
application installed on yourmobile device starts up, and the
indicator light of the input device turnson.If the ignition sense
wire is not connected, press and hold the Naviwheel.Switch offIf
the ignition sense wire is connected, turn off the car ignition. If
youturn off the ignition during a call, the car kit switches off
after you endthe call or disconnect the mobile device from the car
kit.If the ignition sense wire is not connected, press and hold the
Naviwheel until the indicator light of the input device turns off.
After youturn off the car ignition, do not leave the mobile device
connected tothe car kit to prevent accidental draining of the car
battery. Pair and connect a mobile deviceYou can connect the car
kit to a compatible mobile device usingBluetooth wireless
technology.Bluetooth wireless technologyBluetooth wireless
technology allows you to connect compatibledevices without cables.
A Bluetooth connection does not require thatthe two devices be in
line of sight, but the devices should be within10 meters (30 feet)
of each other. The connection is subject tointerference from
obstructions, such as walls, or other electronicdevices.The car kit
is compliant with Bluetooth Specification 1.2 supporting
thefollowing profiles: Handsfree Profile 1.5, Advanced Audio
DistributionProfile (A2DP) 1.0, and Audio/Video Remote Control
Profile (AVRCP) 1.0.Check with the manufacturers of other devices
to determine theircompatibility with this car kit.13 14. Get
startedThere may be restrictions on using Bluetooth technology in
somelocations. Check with your local authorities or service
provider.Set up a connection with your mobile deviceFor a Bluetooth
connection, you need a compatible mobile device thatsupports
Bluetooth wireless technology. When your device is connectedto the
car kit using Bluetooth wireless technology, you can keep it,
forexample, in a bag, while using the car kit. To charge the
battery in yourcompatible Nokia device while using the car kit,
connect the devicethrough the supplied connectivity cable to the
car kit.To pair and connect your device to the car kit, do as
follows:1. Switch on the device and the car kit (see p. 12).2.
Activate the Bluetooth feature on your device, and set the device
tosearch for Bluetooth devices. See the user guide of your device
for instructions.3. Select the car kit from the list of found
devices.4. Enter the Bluetooth passcode 0000 to pair and connect
the car kit toyour device. In some devices you may need to make the
connection separately after pairing. See the user guide of your
device for details. You only need to pair the car kit with your
device once.If the pairing is successful, the car kit sounds a high
beep and appears inthe menu of your mobile device where you can
view the currently pairedBluetooth devices. If the pairing fails,
the car kit sounds a low beep. Tryto pair again by carefully
following the pairing instructions.You can pair the car kit with up
to eight mobile devices in total butconnect it to only one mobile
device at a time.The car kit can connect to a paired device only if
the device is switchedon and has the Bluetooth feature
activated.Connect the car kit manuallyWhen you switch on the car
kit but have not connected a device to it,you can set the car kit
to search for paired devices.To start the search, press and hold
the Navi wheel for about 1 second.During the search, the indicator
light of the input device flashes. The carkit first tries to
connect to the device that was used with it most14 15. Get
startedrecently. If this fails, the car kit tries to connect to one
of the otherBluetooth devices that have been most recently paired
with it. The carkit beeps when it connects to the device.Connect
the car kit automaticallyYou can set your paired device to allow an
automatic connection withthe car kit when the car kit is switched
on. To do this in Nokia devices,change your paired device settings
in the Bluetooth menu.When you switch on the car kit, within 45
seconds the car kit tries tomake a Bluetooth connection to the last
used device. If this fails, the carkit tries to connect to one of
the other Bluetooth devices that have beenmost recently paired with
it.Disconnect the car kitTo disconnect the car kit from your
device, close the connection with thecar kit in the Bluetooth menu
of your device or switch off the car kit.You do not need to delete
the pairing with the car kit to disconnect it.Clear the list of
paired devicesThe car kit saves the pairing information about the
last eight Bluetoothdevices that have been paired with it. To clear
this information, switchoff the car kit, and press and hold the
Navi wheel for 10 seconds. The carkit beeps. Connect your music
player to the car kitYou can connect a compatible music player to
the car kit usingthe 3.5-mm (0.14 inch) audio plug of the supplied
connectivity cable.15 16. Use without CarMenu3. Use without CarMenu
Answer a callTo answer a call, press.To reject an incoming call,
press . End a callTo end an active call, press. Make a callTo make
a call, select the desired contact from the phonebook of yourmobile
device, or enter a phone number on your mobile device, and
press.Call the last dialed numberTo call the last dialed number,
press twice.Voice dialingYou can use voice tags that you have saved
in your mobile device.To start voice dialing, press and holduntil
you hear a tone. Say thevoice tag. The mobile device plays the
voice tag and dials thecorresponding phone number. For details on
using voice dialing, see theuser guide of your mobile device.
Adjust volume during a callTo adjust the volume during a call or
when a call is alerting, turn theNavi wheel to left to decrease the
volume or to right to increase it. Mute or unmute the microphoneTo
mute or unmute the microphone during a call, press and hold.16 17.
Use without CarMenu Switch a call between car kit and mobile
deviceTo switch a call between the car kit and your compatible
mobile device,press . Connect a mobile deviceTo connect the car kit
to a paired device, press and hold the Navi wheelfor about 1
second. Listen to musicTo start, pause, or resume music playback
when the music player of yourmobile device is active, press the
mode key.To skip to the next or previous track of a playlist,
artist, or album when atrack is playing or paused, turn the Navi
wheel. 17 18. Troubleshooting4. Troubleshooting Connection issuesI
cannot connect the car kit to my mobile device through a
Bluetoothconnection. Ensure that the car kit is switched on and
paired with your device. Check that the Bluetooth feature is
activated on your device.The car kit does not establish a Bluetooth
connection to my paireddevice when I turn on the ignition or switch
on the car kit. Check that the Bluetooth feature is activated on
your device. Ensure that your device is set to connect to the car
kit automatically when the car kit is switched on.My car radio does
not have a stereo or auxiliary input.Ask the technician who
installs the car kit to use an adapter that allowsto connect the
stereo outputs of the car kit to some other input on thecar radio
(such as the cd changer connector) for stereo sound.I cannot pair
my compatible music player with the car kit.Check that the
Bluetooth passcode of the music player is 0000. If this isnot the
case, change the passcode to 0000 as instructed in the userguide of
the music player. Audio issuesThe caller cannot hear my voice
during a call. Check that the car kit microphone is not muted.
Ensure that the device is properly connected to the car kit through
a Bluetooth connection.The audio quality is not good or I cannot
hear sound. If the car kit is connected to the car radio, check
that the car radio volume is set properly.18 19. Troubleshooting
The mono output of the car kit is designed for use with a
loudspeaker and does not work properly when connected to a car
radio. If the car kit is connected to the supplied loudspeaker,
check that the car kit volume is set properly.The car kit does not
play sound in stereo. Check that the car radio is set to receive
audio through the stereo input. Check that you have selected the
correct audio source in the car radio. Check that the car radio
volume is set properly.The sound quality of the music player is
similar to a phone call.If you use the music player feature of your
mobile device, check thatyour device model is shown on the
compatibility list in the support areaof the car kit at
www.nokia.com.I cannot hear music played with the music player when
the mobiledevice or music player is connected to the car kit. If
you use the music player feature of your device, check that your
device model is shown on the compatibility list in the support area
of the car kit at www.nokia.com. Check that the mobile device or
music player is properly connected to the car kit. Check that the
car kit is properly connected to the stereo input on your car
radio. See Setup option 1, p. 24, or consult with the technician
who installed the car kit.The car radio is not muted when I answer
a call or hear a navigationinstruction.Ask the technician who
installed the car kit to ensure that the mute lineis properly
connected. 19 20. Troubleshooting Other issuesThe car kit does not
switch on when I turn on the car ignition.Ask the technician who
installed the car kit to ensure that the ignitionsense wire is
properly connected.The battery of the mobile device does not charge
when the device isconnected to the car kit.Check that all the
cables are properly connected.20 21. Installation5. Installation
Safety informationObserve the following safety guidelines when
installing the car kit. Only a qualified service technician should
install or service the car kit using the approved original Nokia
parts supplied in the sales package. Faulty installation or service
may be dangerous and may invalidate any warranty which may apply to
the car kit. End users should remember that the car kit comprises
complex technical equipment that requires professional installation
usingspecial tools and expert know-how. Instructions given in this
guide are general guidelines that apply tothe installation of the
car kit in an automobile. However, due to the wide variety of car
types and models available on the market, this guide cannot
consider the individual technical requirements relevant to any
particular vehicle. Contact the vehicle manufacturer for detailed
information about the vehicle in question. The car kit is suitable
for use only in vehicles with 12-V, negative grounding. Use on
other supply voltages or alternative polarity will damage the
equipment. Remember that modern automotive systems include onboard
computers where key vehicle parameters are stored. Improper
disconnection of the car battery may cause loss of data,
necessitating extensive effort for reinitialization of the system.
If you have any concerns, contact your car dealer before any
installation work is done. Do not wire the car kit equipment to the
high-voltage lines of the ignition system. When installing the
parts of the car kit, ensure that none of them interfere with or
hinder the steering or braking systems or other controls or systems
used in the operation of the vehicle (for example, airbags) or
disturb your field of vision while driving. Ensure that the21 22.
Installation car kit and any of its components are not installed
where you might come in contact with it in the event of an accident
or collision. When mounting a mobile holder, ensure that the phone
display is clearly visible for the user. Your service technician or
dealer may be able to provide you with information on alternatives
for mounting the equipment suitably in your vehicle without
requiring drilled holes. Do not smoke when working on the car.
Ensure that there is no source of fire or flame nearby. Take care
not to cause damage to electrical cables, fuel or brake lines, or
safety equipment during installation work. RF signals may affect
improperly installed or inadequately shielded electronic systems in
motor vehicles such as electronic fuel injection systems,
electronic antiskid (antilock) braking systems, electronic speed
control systems, and airbag systems. Should you notice a fault or
change in the operation of such a system, contact your car dealer.
Ensure that cables are placed so that they will not be subject to
mechanical wear and tear (for example, not laid under car seats or
over sharp edges). Connection optionsThe car kit can be connected
to a compatible mobile device usingBluetooth wireless technology.
The car kit can be connected to acompatible music player using the
supplied connectivity cable.Bluetooth connectionFor a Bluetooth
wireless connection, the user needs a compatible mobiledevice
supporting Bluetooth technology. For more information, seep. 13 and
22.22 23. InstallationCable connectionThe car kit is supplied with
a connectivity cable that has a 2.0-mm (0.08inch) charging plug and
a 3.5-mm (0.14 inch) audio plug. For moreinformation, see
Connectivity cable CA-113CU, p. 33.Integration with a car stereo
systemThe car kit can be connected to the car stereo system in
three differentways. Select the appropriate connection options
depending on thecomponents available in the sales package.23 24.
InstallationSetup option 1For phone calls, use the ISO system cable
CA-139 (if supplied with thecar kit), or a cable specific to the
car radio, to connect the car kit to thecar radio and its
speakers.For music, use a cable specific to your car radio to
connect the 3.5-mm(0.14 inch) stereo output to the AUX input of the
car radio.You can connect the car kit to a loudspeaker with an
impedance of atleast 2 ohms. The optimal impedance for the car kit
is 4 ohms. If theimpedance is over 8 ohms, the output power is
significantly lower thannormal.24 25. Installation1. Disconnect the
two ISO connectors from the car radio for power andloudspeakers,
and replace them with the two connectors of the system cable
CA-139. Connect the wire labeled "Mute" of the system cable to one
of the wires labeled "Mute 1", "Mute 2", or "Mute 3" according to
the pinning of the car radio. Leave the other labeled mute wires 25
26. Installation connected as they are. Connect the wires of the
same colour together. For phone calls, connect the system cable
CA-139 to the power output and the loudspeaker output of the
hands-free unit.2. Check the +12-V power pin and the ignition pin
of the two ISO connectors coming from the car and the respective
pins of the system cable CA-139. If necessary, swap the two wires
of the system cable. Connect the system cable to the two open ISO
connectors.3. Connect the stereo music output of the hands-free
unit (a standard 3.5-mm stereo connector) to the AUX input of the
car radio. Use an appropriate cable specific to your car radio
(this cable is not supplied with the car kit).4. To charge a
compatible Nokia mobile device through the car kit, connect one end
of the connectivity cable CA-113CU to the hands- free unit and the
other end to the 2.0-mm (0.08 inch) charging connector of the
mobile device. To play music from a mobile music player that has a
standard 3.5- mm (0.14 inch) audio connector, plug the 3.5-mm (0.14
inch) connector of the connectivity cable to the music device.After
you have made all the connections described above, connect
theexternal input device CU-10 and the microphone MP-2 to the
respectiveconnectors on the hands-free unit.26 27.
InstallationSetup option 2If the car radio has a mobile phone input
and an AUX input for musicdevices, you can connect your mobile
device to the speakers of the carradio.1. Connect the respective
wires of the power cable PCU-4 to the car battery and ignition
sense (if available). Connect the car radio mute signal (if
available) to the car radio. Plug the connector into the hands-free
unit.2. For phone calls, connect the loudspeaker output of the
hands-freeunit to the mobile phone input of the car radio. Use an
appropriate27 28. Installation cable specific to your car radio
(this cable is not supplied with the car kit).3. Connect the stereo
music output of the hands-free unit (a standard 3.5-mm stereo
connector) to the AUX input of the car radio. Use an appropriate
cable specific to your car radio (this cable is not supplied with
the car kit).4. To charge a compatible Nokia mobile device through
the car kit, connect one end of the connectivity cable CA-113CU to
the hands- free unit and the other end to the 2.0-mm (0.08 inch)
charging connector of the mobile device. To play music from a
mobile music player that has a standard 3.5- mm (0.14 inch) audio
connector, plug the 3.5-mm (0.14 inch) connector of the
connectivity cable to the music device.After you have made all the
connections described above, connect theexternal input device CU-10
and the microphone MP-2 to the respectiveconnectors on the
hands-free unit.28 29. InstallationSetup option 3You can use the
external loudspeaker SP-3 and the power cable PCU-4as follows (if
supplied with the car kit):1. Connect the respective wires of the
power cable PCU-4 to the car battery and ignition sense (if
available). Connect the car radio mute signal (if available) to the
car radio. Plug the connector into the hands-free unit.2. For phone
calls, connect the loudspeaker output of the hands-free unit to the
loudspeaker SP-3.3. Connect the stereo music output of the
hands-free unit (a standard 3.5-mm stereo connector) to the AUX
input of the car radio. Use an appropriate cable specific to your
car radio (this cable is not supplied with the car kit).29 30.
Installation4. To charge a compatible Nokia mobile device through
the car kit, connect one end of the connectivity cable CA-113CU to
the hands- free unit and the other end to the 2.0-mm (0.08 inch)
charging connector of the mobile device. To play music from a
mobile music player that has a standard 3.5- mm (0.14 inch) audio
connector, plug the 3.5-mm (0.14 inch) connector of the
connectivity cable to the music device.After you have made all the
connections described above, connect theexternal input device CU-10
and the microphone MP-2 to the respectiveconnectors on the
hands-free unit. Install the car kit in a vehicleThis section
describes how to install the car kit parts in a vehicle. Theparts
are explained in Parts, p. 12.Example of appropriate installation30
31. InstallationHands-free unit HF-21WThe hands-free unit has the
following connectors. The symbols areprinted at the bottom of the
unit. Power Loudspeaker output for phone calls; for connections,
seeIntegration with a car stereo system, p. 23System connector for
connectivity cable CA-113CU to charge amobile device and play music
over a cable connectionConnector for the input device CU-10 Stereo
music outputConnector for the microphone MP-2When you install the
hands-free unit, ensure that the cables for themicrophone and
loudspeaker reach the places where you intend tomount these
parts.Do not mount the hands-free unit inside a metal housing or on
a metalsurface because this will impair the Bluetooth connection
between thehands-free unit and the Bluetooth device that is
connected to the carkit. For an optimal connection, ensure that the
distance between thehands-free unit and a metal surface is over 4
mm (0.16 inch).To mount the hands-free unit, use the hook and loop
tape pads suppliedwith the car kit. Do as follows:1. Detach the two
pads from each other.2. Attach the pad with the loops: peel off the
protective sheet from the adhesive side, and attach the pad to the
desired location in the car. When you peel off the protective
sheet, do not touch the adhesive side with a finger. Ensure that
the surface where you attach the pad is dry and free from dirt and
dust.31 32. Installation3. Attach the pad with the hooks: peel off
the protective sheet from the adhesive side, and attach the pad to
the underside of the hands-free unit.4. Press the hands-free unit
firmly onto the loop pad, and check that the hands-free unit stays
securely in place.Input device CU-10The input device should be
located so that it is within easy reach of theuser. When installing
the parts of the car kit, ensure that none of theminterfere with or
hinder the steering or braking systems or other controlsor systems
used in the operation of the vehicle (for example, airbags).Ensure
that the input device cable reaches to the hands-free unit
forconnection. The best location to mount the input device is
horizontallyon the console between the drivers and front passengers
seat so thatthe input device keys are toward the front of the
vehicle.To mount the input device, do as follows:1. Attach the
supplied tape pad to the desired location in the car: peel off the
protective sheet from a side of the pad, and press the pad into
place. When you peel off the protective sheet, do not touch the
adhesive side with a finger. Ensure that the surface where you
attach the pad is dry and free from dirt and dust.2. Peel off the
protective sheet from the pad on the underside of the input device
and from the other side of the pad attached to the car.3. Press the
pads firmly against each other, and check that the input device
stays securely in place.Microphone MP-2Select the mounting location
of the microphone carefully to increasethe quality of voice
transmission.The best place to mount the microphone is close to the
rear view mirror.Mount the microphone so that it points toward the
drivers mouth and32 33. Installationat least 1 meter (3 feet) from
the car kit loudspeaker to avoid audiofeedback.Mount the microphone
so that it is not exposed to air streams from thevents. Do not
place the microphone cable in the heating, ventilation,
orair-conditioning system. Use the supplied double-sided adhesive
tape tofix the microphone to reduce the amount of background noise
of the carthat can interfere with your calls.Insert the microphone
plug into the microphone connector on thehands-free unit, and turn
the plug clockwise to lock it firmly. Use of anyother microphone
than the microphone MP-2 supplied with the car kitmay impact the
audio quality.Connectivity cable CA-113CUThe car kit is supplied
with a connectivity cable that has a standard 3.5-mm (0.14 inch)
stereo plug and a 2.0-mm (0.08 inch) charging plug.The 3.5-mm (0.14
inch) stereo plug is compatible with music playersthat have the
respective audio connector. The 2.0-mm (0.08 inch)charging plug is
compatible with Nokia mobile devices that have therespective
charging connector.With the cable you can connect the car kit to a
music player to listen tomusic while you use the car kit through a
Bluetooth connection with acompatible mobile device for call
handling and charge the battery of themobile device from the car
battery.To connect the cable, carefully insert the end indicated
with the TOPtext to theconnector on the hands-free unit so that the
text isupwards. Insert the charging plug to the mobile device and
the audioplug to the music player.System cable CA-139With the
system cable (if supplied with the car kit) you can easilyconnect
the car kit to a car radio that has ISO connectors (see 33 34.
InstallationIntegration with a car stereo system, p. 23). For
details, see the userguide of the car radio.Mobile holderIf the
mobile device is connected to the car kit with a cable or the car
kitis used through the CarMenu application, you need to mount a
mobileholder designed for the mobile device that is used with the
car kit.When mounting a mobile holder iin your car, ensure that the
display ofthe mobile device is clearly visible for the user and
that the holder doesnot interfere with or hinder the steering or
braking systems or othercontrols or systems used in the operation
of the vehicle (for example,airbags). For mounting instructions,
see the documentation that camewith the mobile holder.If you use a
universal holder (a holder that can be used with differentmobile
devices), you may have to plug the charging cable directly intothe
mobile device after placing the device in the holder. Optional
enhancementsYou can extend the features of the car kit with
optional enhancements.Consult your dealer or service technician for
suitable enhancements forthe car kit. Use only approved and
compatible enhancements.34 35. InstallationAntenna coupler and
external antennaAn antenna coupler can be used to connect an
external antenna to thecar kit. The external antenna improves the
reception of the mobiledevice in a car. For availability, contact
your dealer. Note: In order to comply with RF exposure guidelines,
install the external antenna so that a minimum distance of 20
centimeters (8 inches) can be maintained between the external
antenna and all persons, with external antenna gain not exceeding 3
dBi. Check the operation of the car kitAfter the car kit has been
installed, check that it is mounted andworking properly. See also
Troubleshooting, p. 18. 35 36. Care and maintenanceCare and
maintenanceYour car kit is a product of superior design and
craftmanship and should betreated with care. The suggestions below
will help you protect your warrantycoverage. Keep the car kit dry.
Precipitation, humidity and all types of liquids or moisture can
contain minerals that will corrode electronic circuits.Do not use
or store the car kit in dusty, dirty areas. Its moving parts and
electronic components can be damaged.Do not attempt to open the car
kit. Non-expert handling may damage it.Do not use harsh chemicals,
cleaning solvents, or strong detergents to clean the car kit
parts.Do not paint the car kit parts. Paint can clog the moving
parts and prevent proper operation.If the car kit is not working
properly, take the vehicle to an authorized servicefacility for the
car kit to be serviced.36 37. Additional safety
informationAdditional safety information VehiclesRF signals may
affect improperly installed or inadequately shielded
electronicsystems in motor vehicles such as electronic fuel
injection systems, electronicantiskid (antilock) braking systems,
electronic speed control systems, and air bagsystems. For more
information, check with the manufacturer or its representativeof
your vehicle or any equipment that has been added.Faulty
installation or service may be dangerous and may invalidate any
warrantythat may apply to the device. Check regularly that all
wireless device equipmentin your vehicle is mounted and operating
properly. Do not store or carryflammable liquids, gases, or
explosive materials in the same compartment as thedevice, its
parts, or enhancements. For vehicles equipped with an air
bag,remember that air bags inflate with great force. Do not place
objects, includinginstalled or portable wireless equipment in the
area over the air bag or in the airbag deployment area. If
in-vehicle wireless equipment is improperly installed andthe air
bag inflates, serious injury could result.37
