411 410 Plugs LS TEMA Series TIF2300 Middle-/High-Pressure TEMA IF-Series Middle-/High-Pressure TEMA IF-Series Flow Capacity Viscosity for 32cSt at 40°C as per ISO 7241/2-2000 Couplings Female Thread DS = Delivery Status: in stock on short call medium term delivery TEMA Series TIF2300 actual size Nominal Diameter = 8,55 mm 2 3,3 TEMA Series TIF2300 Pressure Drop (bar) Seal-Kit for Plugs TEMA Series TIF2300 DS Flow Rate in l/min Coupling Body Sleeve Valve Springs Locking Balls Seals Valve Holder Thread Body Back-Up Material Coupling Plug Plug Body Valve Valve Holder Springs Seals Back-Up Steel, QPQ-treated Steel, Zinc Plated, Yellow passivated, sealed Steel, Zinc Plated, Yellow passivated, sealed AISI 301 AISI 420 C NBR Steel, Zinc Plated, Yellow passivated, sealed Steel, Zinc Plated, Yellow passivated, sealed PTFE Standard Steel, Hardened, Zinc Plated, Yellow passivated, sealed Steel, Zinc Plated, Yellow passivated, sealed Brass AISI 301 NBR PTFE Pressure (Coupling/Plug) Bursting Pressure coupled Working Pressure uncoupled > 1800 bar 350 bar Working Pressure See chart. Technical Description These couplings offer an ab- solutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pres- sure drop, and thus achieves maximum cost-effectiveness. Advantages The coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoupling. Working Temperature* Conn. A Hex SW L mm D mm G 1/8 17 35 18,6 Valve 450 Working Press. in bar Standard Version NBR Seal TIF2320 Part Number Dust Protection TEMA Series TIF2300 Description L mm D mm Material Part Number DS Coupling 145 19 TIB3826 Color PVC Blue Female Thread Description Material Part Number Plug TIF2300-PSN NBR ISO 16028 Connection A DS SW mm SW1 mm L mm L1 mm D mm D1 mm D2 mm Working Press. in bar Version Seal Part Number G 1/8 19 40 20,5 20 450 Standard NBR TIF2310 Plug 145 19 TIB2526 PVC Blue DS = Delivery Status: in stock on short call medium term delivery -30°C up to +100°C (NBR) -25°C up to +200°C (FKM) depending on the medium. *At a temperature below -25°C and above +200°C special seals are available on request. Plug TIF2300-PSV FKM Available Valves
Transcript
411410
Plugs
LS
TEMA Series TIF2300
Mid
dle-
/Hig
h-Pr
essu
reTE
MA
IF-S
erie
s
Mid
dle-
/Hig
h-Pr
essu
reTE
MA
IF-S
erie
s
Flow Capacity Viscosityfor 32cSt at 40°C as per ISO 7241/2-2000
Couplings
Female Thread
DS = Delivery Status: in stock on short call medium term delivery
TEMA Series TIF2300
actu
al s
ize
Nominal Diameter
= 8,55 mm23,3TEMA Series
TIF2300Pr
essu
re D
rop
(bar
)
Seal-Kit for Plugs TEMA Series TIF2300
DS
Flow Rate in l/min
Coupling BodySleeveValveSpringsLocking BallsSeals Valve Holder Thread Body Back-Up
Technical DescriptionThese couplings offer an ab-solutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pres-sure drop, and thus achieves maximum cost-effectiveness.
AdvantagesThe coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoupling. Working Temperature*
Conn. A
Hex SW
Lmm
Dmm
G 1/8 17 35 18,6
Valve
450
Working Press. in bar
Standard
Version
NBR
Seal
TIF2320
Part Number
Dust Protection TEMA Series TIF2300
Description Lmm
Dmm
Material Part Number DS
Coupling 145 19 TIB3826
Color
PVC Blue
Female Thread
Description Material Part Number
Plug TIF2300-PSNNBR
ISO 16028
Connection A
DSSW mm
SW1 mm
Lmm
L1mm
D mm
D1 mm
D2 mm
Working Press. in bar
Version Seal Part Number
G 1/8 19 40 20,5 20 450 Standard NBR TIF2310
Plug 145 19 TIB2526PVC Blue
DS = Delivery Status: in stock on short call medium term delivery
-30°C up to +100°C (NBR)-25°C up to +200°C (FKM) depending on the medium.
*At a temperature below -25°C and above +200°C special seals are available on request.
Plug TIF2300-PSVFKM
Available Valves
412 413
ISO 16028
Flow Capacity Viscosityfor 32cSt at 40°C as per ISO 7241/2-2000
Couplings
Female Thread
TEMA Series TIF2500
70%
of a
ctua
l size
Nominal Diameter
= 31 mm26,3TEMA Series
TIF2500Pr
essu
re D
rop
(bar
)
Flow Rate in l/min
G 1/4
Coupling BodySleeveValveSpringsLocking BallsSealsValve HolderThread Body
Technical DescriptionThe IF series plug profile is produced according to ISO Standard 16028 and is com-patible with other makes of the same standard. These couplings offer an absolutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness.
AdvantagesThe coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoup-ling. With the patented pressure eliminator it is possible to couple under static pressure until working pressure.
Working Temperature*-30°C up to +100°C (NBR)-25°C up to +200°C (FKM) depending on the medium.
*At a temperature below -25°C and above +200°C special seals are available on request.
DS = Delivery Status: in stock on short call medium term delivery
HexSW
Hex1SW1
Available Valves
415414
Nominal Diameter
78 mm2 = 10TEMA Series
TIF3800
64%
of a
ctua
l size
Plugs with Pressure Eliminator
Female Thread
TEMA Series TIF2500
G 1/4 27 74 29,5 315 Pressure Eli. NBR TIF2521
ISO 16028
Couplings
Female Thread
TEMA Series TIF3800
G 3/8 30 71 12 32 32 250 Standard NBR TIF3810
Flow Capacity Viscosityfor 32cSt at 40°C as per ISO 7241/2-2000
Pres
sure
Dro
p (b
ar)
Flow Rate l/min
Working PressureSee chart.
Technical DescriptionThe IF series plug profile is produced according to ISO Standard 16028 and is com-patible with other makes of the same standard. These couplings offer an absolutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness.
AdvantagesThe coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoup-ling. With the patented pressure eliminator it is possible to couple under static pressure until working pressure.
Working Temperature*
Plugs with Pressure Eliminator for Multiplate
Female Thread with locking ring according to DIN 471 Standard
Female Thread with locking ring according to DIN 471 Standard
Connection A
DSHexSW
Hex1 SW1
Lmm
L1mm
D mm
D1 mm
D2 mm
Working Press. in bar
Version Seal Part Number
Connection A
DSLmm
L1mm
D mm
D1 mm
D2 mm
Working Press. in bar
Version Seal Part Number
Connection A DSHexSW
Lmm
L1mm
L2 mm
L3mm
D mm
Working Press. in bar
Version Seal Part NumberD1 mm
D2 mm
Connection A DSLmm
L1mm
L2 mm
L3mm
D mm
Working Press. in bar
Version Seal Part NumberD1 mm
D2 mm
Mid
dle-
/Hig
h-Pr
essu
reTE
MA
IF-S
erie
s
Connection A DSLmm
L1mm
L2 mm
L3mm
D mm
Working Press. in bar
Version Seal Part NumberD1 mm
D2 mm
Connection A DSHexSW
Hex1SW1
Lmm
L1mm
D mm
D1 mm
D2 mm
Working Press. in bar
Version Seal Part Number
DS = Delivery Status: in stock on short call medium term deliveryDS = Delivery Status: in stock on short call medium term delivery
HexSW
Hex1 SW1
HexSW
HexSW
419418
ISO 16028
Flow Capacity Viscosityfor 32cSt at 40°C as per ISO 7241/2-2000
Couplings
Female Thread
TEMA Series TIF5000
60%
of a
ctua
l si
ze
= 122 mm212,5TEMA Series
TIF5000Pr
essu
re D
rop
(bar
)
Flow Rate in l/min
G 1/2
Working PressureSee chart.
Technical DescriptionThe IF series plug profile is produced according to ISO Standard 16028 and is com-patible with other makes of the same standard. These couplings offer an absolutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness.
AdvantagesThe coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoup-ling. With the patented pressure eliminator it is possible to es-tablish a coupling under static pressure until working pressure.
Working Temperature*
36 76 14 40 39 250 Standard NBR TIF5010
Couplings for Multiplate
Female Thread with locking ring according to DIN 471 Standard
TEMA Series TIF5000
76 39,8
Couplings with Pressure Eliminator
Female Thread
TEMA Series TIF5000
Plugs
Female Thread
TEMA Series TIF5000
Plugs for Multiplate
Female Thread with locking ring according to DIN 471 Standard
-30°C up to +100°C (NBR)-25°C up to +200°C (FKM) depending on the medium.
*At a temperature below -25°C and above +200°C special seals are available on request.
Additional threads on request.
Available Valves
421420
200 mm2 = 16TEMA Series
TIF6300
55%
of a
cuta
l size
ISO 16028
Couplings
Female Thread
TEMA Series TIF6300
G 3/4 40 82 16 43 42 250 Standard NBR TIF6310
Working PressureSee chart.
Technical DescriptionThe IF series plug profile is produced according to ISO Standard 16028 and is com-patible with other makes of the same standard. These couplings offer an absolutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness.
AdvantagesThe coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoup-ling. With the patented pressure eliminator it is possible to couple under static pressure until working pressure.
Working Temperature*
Plugs with Pressure Eliminator
Female Thread
TEMA Series TIF5000
G 1/2 40 98 14 43 250 Pressure Eli. NBR TIF5021
Plugs with Pressure Eliminator for Multiplate TEMA Series TIF5000
98 39,8
Seal-Kit for Plug TEMA Series TIF5000
Dust Protection TEMA Serie TIF5000
Coupling 185 35 TIF5016PVC Blue
Plug TIF5000-PSNNBR
Further sealing materials on request.
Further colors on request.
Lubrication Nipple TEMA Series TIF5000
Description Lmm
Dmm
Part Number DS
Coupling 42 25 TGRIF50
G 1/2 40 14 5,2 15,3 46 250 Press. Eli. NBR TIF5021 E
Female Thread with locking ring accor-ding to DIN 471 Standard
Plug TIF6300-PSVFKM
Plug TIF6300-PSEPEPDM
Plug TIF6300-PSPUPUR
Plug 215 37 TIF6326PVC Blue
Mid
dle-
/Hig
h-Pr
essu
reTE
MA
IF-S
erie
s
Connection A
DSHexSW
Hex1 SW1
Lmm
L1mm
D mm
D1 mm
D2 mm
Working Press. in bar
Version Seal Part Number
Connection A
DSLmm
L1mm
D mm
D1 mm
D2 mm
Working Press. in bar
Version Seal Part Number
Connection A DSHexSW
Lmm
L1mm
L2 mm
L3mm
D mm
Working Press. in bar
Version Seal Part NumberD1 mm
D2 mm
Connection A DSLmm
L1mm
L2 mm
L3mm
D mm
Working Press. in bar
Version Seal Part NumberD1 mm
D2 mm
Mid
dle-
/Hig
h-Pr
essu
reTE
MA
IF-S
erie
s
Connection A DSLmm
L1mm
L2 mm
L3mm
D mm
Working Press. in bar
Version Seal Part NumberD1 mm
D2 mm
Connection A DSHexSW
Hex1 SW1
Lmm
L1mm
D mm
D1 mm
D2 mm
Working Press. in bar
Version Seal Part Number
DS = Delivery Status: in stock on short call medium term deliveryDS = Delivery Status: in stock on short call medium term delivery
HexSW
Hex1 SW1
HexSW
HexSW
425424
ISO 16028
Flow Capacity Viscosityfor 32cSt at 40°C as per ISO 7241/2-2000
Couplings
Female Thread
TEMA Series TIF7500
47%
of a
ctua
l size
= 280 mm219TEMA Series
TIF7500Pr
essu
re D
rop
(bar
)
Flow Rate in l/min
G 3/4
Working PressureSee chart.
Technical DescriptionThe IF series plug profile is produced according to ISO Standard 16028 and is com-patible with other makes of the same standard. These couplings offer an absolutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness.
AdvantagesThe coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoup-ling. With the patented pressure eliminator it is possible to couple under static pressure until working pressure.
Working Temperature*
46 96 16 50 46 250 Standard NBR TIF7510
Couplings for Multiplate
Female Thread with locking ring according to DIN 471 Standard
TEMA Series TIF7500
95 46,8
Couplings with Pressure Eliminator
Female Thread
TEMA Series TIF7500
Plugs
Female Thread
TEMA Series TIF7500
Plugs for Multiplate
Female Thread with locking ring according to DIN 471 Standard
TEMA Series TIF7500
G 3/4 46
83
77 16 50
46.8
250 Standard NBR TIF7520
G 3/4 46 16 5,2 15,3 53 250 Standard NBR TIF7510 E
-30°C up to +100°C (NBR)-25°C up to +200°C (FKM) depending on the medium.
*At a temperature below -25°C and above +200°C special seals are available on request.
Additional thread on request.
Available Valves
427426
490 mm2 = 25TEMA Series
TIF10000
43%
of a
ctua
l size
ISO 16028
Couplings
Female Thread
TEMA Series TIF10000
G 1 55 105 18 60 55 200 Standard NBR TIF10010
Working PressureSee chart.
Technical DescriptionThe IF series plug profile is produced according to ISO Standard 16028 and is com-patible with other makes of the same standard. These couplings offer an absolutely dry break – no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness.
AdvantagesThe coupling can be operated with one hand and is equipped with a safety locking device to prevent unintentional uncoup-ling. With the patented pressure eliminator it is possible to couple under static pressure until working pressure.
