7
NON DESTRUCTIVE INSPECTION IN THE PROTECTIVE ATMOSPHERE PACKAGING PROCESS FOOD LINE
NON DESTRUCTIVE INSPECTIONIN THE PROTECTIVE ATMOSPHERE
PACKAGING PROCESS
FOODLINE
arol.comlpro.it
tirelli.netunimac-gherri.com
Via Leonardo da vinci 11729010 Alseno [PC] - ITALY
tel. +39 0523 945745
TECHNOLOGICAL PROCESS OPTIMIZATIONThe optimization of the technological process guarantees the correct injectionof the conservation gas mixture in the packaging
CHOICE OF THE PACKAGING The packaging must be chosen according to the shelf life intendedfor a specific product
PROTECTIVE ATMOSPHERE AND FOOD SAFETY
PROTECTIVE ATMOSPHERE PACKAGING REQUIRESE THE REPLACEMENT OFTHE AIR WITH A MIXTURE OF GAS WHICH COMES INTO DIRECT CONTACTWITH THE FOOD AND DETERMINES ITS CONSERVATION
FRESH FOOD CONSERVATION IN M.A.P.
TECHNOLOGICAL PROCESS STEPS:
It's very important to identify the best gas mixture for the fresh food conservation,fine evaluating the gas-food interactions
CONSERVATION GAS MIXTURE IDENTIFICATION
To ensure the right food conservation it's essential to ensure the seal of the welds and the proper gas mixture in the packages.
POST-PACKAGING INSPECTIONS
« THE FOOD GASES USED IN MAPTECHNOLOGY ARE IDENTIFIED ASFOOD ADDITIVES »[Regulation CE 1333/2008 Regulation CE 321/2012]
« THE INFORMATION TO BE SHOWNIN THE LABEL IS: “PACKAGED IN A PROTECTIVE ATMOSPHERE » [Annex III, paragraph 2, regulation UE n. 1196/2011]
WHAT THE EUROPEANLEGISLATION SAYS ...
The PROTECTIVE ATMOSPHERE PACKAGINGtechnology is not a "packaging" technique butA CONSERVATION TECHNIQUE.
In order to GUARANTEE THE CORRECTCONSERVATION of your MAP product IS BASILAR THE POST-PACKAGING INSPECTION to ENSURE THE WELDS SEALING and a PROPER GAS MIXTURE in thepackages
REFERENCE ONLY - THE TEXTS ARE TRANSLATED FROM THE OFFICIAL ITALIAN VERSION OR REGUALATIONS
NON DESTRUCTIVE METHOD
LEAK DETECTIONHOLES AND MICRO-HOLES COULD BE PRESENTALONG THE WELDINGS CAUSING A GAS LEAK.
THIS AFFECT IN A BAD WAY THEFOOD CONSERVATION
THE CHECK OF THE PERCENTAGE OF GASES INJECTED IN THE PACKAGING AND THE WELDS TIGHTNESSARE ESSENTIAL ELEMENTS TO GUARANTEE THE SHELF LIFE OF THE PRODUCT
ALLOWS TO INSPECT THE CO2 AND O2 CONCENTRATION INSIDE THE ALREADY SEALED PACKAGES, ENSURING ITS INTEGRITY AND CORRECT GAS CONTENTSNEW TECHNOLOGIES BASED ON LASER PECTROSCOPY
THE GAS MIXTURE IS THE ONLY ADDED ELEMENT WHICHDETERMINES THE FOOD CONSERVATION.IT’S ESSENTIAL TO VERIFY THAT THE GASES ARE INJECTEDIN THE CORRECT PERCENTAGES IN ORDER TO GUARANTEETHE CORRECT SHELF LIFE OF THE PROSUCT.
GAS ANALYSIS
IN LINE
ON SAMPLINGCO2 AND O2 CONCENTRATION MEASURENET[LABORATORY INSTRUMENTS]COSTS REDUCTIONINCREASE YOUR PRODUCTIVITY AVOIDINGWASTED PRODUCTS [NON DESTRUCTIVE TEST]
SUSTAINABILITYREDUCE DISPOSED PACKAGING AND FOOD WASTE
REPEATABLE TEST, IN TIME,ON THE SAME SAMPLEIT ALLOWS TO CARRY OUT STUDIES FORNEW PACKAGES AND TO CHECK THE SHELF-LIFEOF YOUR PRODUCTS
CO2 AND O2 CONCENTRATION MEASUREMETON 100% OF YOUR PRODUCTION
COSTS REDUCTION NO OWN PERSONNEL NECESSARY FOR SAMPLE CHECKS NO GOOD PRODUCTS TTO BE DISPOSEDLINE MONITORING AND OPTIMIZATIONPACKAGING PROCESS EFFICIENCY UNDER CONTROLREDUCTION OF MARKET CLAIMS
REJECTION OF DEFECTIVE PACKAGES
REDUCEDISPOSED FOODAND PACKAGES
PACKAGESSEALING
GUARANTEED
PROTECTEDSHELF-LIFE
REDUCEMARKETCLAIMS
IMPROVESUSTAINABILITY
IN LINE100% OF YOUR PACK UNDER CONTROLHOLE AND MICRO-HOLE IDENTIFICATION
PROTECT YOUR BRAND REPUTATIONRREDUCE MARKET CLAIMS
REJECTION OF DEFECTIVE PACKAGES
GAMMA COMPLETA DI SISTEMI DI ISPEZIONE NON DISTRUTTIVI
2D CODESREADING BARCODE QR-CODE DATAMATRIX
LABELSQUALITY MATCHING INTEGRITY POSITIONING PRINTING QUALITY
CODES READING[OCR | OCV] EXPIRATION DATE LOT CODE OTHER ...
AND SO MUCH MORE ...
ASK TO OUR EXPERTS FOR ALL THE AVAILABLE SOLUTIONSTO GUARANTEE THE QUALITY OF YOUR PRODUCTS ANDOPTIMIZE YOUR PACKAGING PROCESS
DETAILSCHECK LOGOS PRESENCE TEXT INTEGRITY “VERSIONS” CHECK
PROTECT THE TOTAL QUALITY OF YOUR PRODUCTS
14 BRANCHES IN 4 CONTINENTS
130 SPECIALISTS IN INSPECTION E CONTROL
5500 SYSTEMS INSTALLED WORDWIDE
+ THAN 500 SYSTEMS DESIGNED EACH YEAR
PART OF AROL GROUPWHO WE ARE
WHERE WE ARE
20 YEARS OF EXPERIENCE
TALK WITH OUR SPECIALISTS
UNIMAC-GHERRI HEADQUARTERStr. per Barco, 4/G42027 MONTECCHIO EMILIA - ITALY
FT SYSTEM HEADQUARTERVia L. Da Vinci, 11729010 ALSENO - ITALY
L-PRO HEADQUARTERVia del lavoro, 1/336043 CAMISANO VICENTINO - ITALY
AROL HEADQUARTERViale Italia, 19314053 CANELLI - ITALY
TIRELLI HEADQUARTERVia Progresso, 946047 PORTO MANTOVANO - ITALY
GERMANYUK,IRELAND
FRANCEITALY
SPAIL
EUROPE
USA, CANADA
MEXICO, CENTRAL AMERICA
BRAZIL, SOUTH AMERICA
INDIA
CHINA
NON DESTRUCTIVE CONTROLS TO PROTECT YOUR TOTAL QUALITY
arol.comlpro.it
tirelli.netunimac-gherri.com
Via Leonardo da Vinci, 11729010 Alseno [PC] - ITALY
tel. +39 0523 945745
