Date post: | 12-Apr-2017 |
Category: |
Engineering |
Upload: | vishnu-r |
View: | 41 times |
Download: | 3 times |
PUTHUSSERY Phone: 9447047109
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 1
Simulation of new profile_52.3m_three points_unsplitted Date: Thursday, September 29, 2016 Designer: VISHNU R Study name: Nonlinear with epoxy Analysis type: Nonlinear - Dynamic
Table of Contents Description ............................................ 1
Assumptions .......................................... 2
Model Information ................................... 2
Study Properties ..................................... 4
Units ................................................... 4
Material Properties .................................. 5
Loads and Fixtures................................... 6
Connector Definitions ............................... 6
Contact Information ................................. 7
Mesh Information .................................... 8
Sensor Details ........................................ 9
Resultant Forces ..................................... 9
Beams .................................................. 9
Study Results ....................................... 10
Conclusion .......................................... 18
Description No Data
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 2
Assumptions
Model Information
Model name: new profile_52.3m_three points_unsplitted
Current Configuration: Default
Shell Bodies
Document Name and Reference
Formulation Volumetric Properties Document Path/Date
Modified
Surface-Extrude1[1]
Thick
Thickness:300 mm Weight:401334 N
Volume:31.5019 m^3 Mass:40952.4 kg
Density:1300kg/m^3
F:\Students project\Rony\new
profile_52.3m_three points_unsplitted.SLDPRT
Sep 29 18:08:17 2016
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 3
Surface-Extrude1[2]
Thick
Thickness:300 mm Weight:356739 N
Volume:28.0015 m^3 Mass:36401.9 kg
Density:1300kg/m^3
F:\Students project\Rony\new
profile_52.3m_three points_unsplitted.SLDPRT
Sep 29 18:08:17 2016
Surface-Fill1
Thick
Thickness:300 mm Weight:35825 N
Volume:2.81201 m^3 Mass:3655.61 kg
Density:1300kg/m^3
F:\Students project\Rony\new
profile_52.3m_three points_unsplitted.SLDPRT
Sep 29 18:08:17 2016
Split Line1
Thick
Thickness:300 mm Weight:1.55953e+006 N
Volume:144.669 m^3 Mass:159136 kg
Density:1100kg/m^3
F:\Students project\Rony\new
profile_52.3m_three points_unsplitted.SLDPRT
Sep 29 18:08:17 2016
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 4
Study Properties Study name Nonlinear with epoxy
Analysis type Nonlinear - Dynamic
Mesh type Shell Mesh Using Surfaces
Start time 0 Seconds
End time 10 Seconds
Time increment 0.1 Seconds
Large displacement formulation: On
Update load direction with deflection: Off
Large strain formulation: Off
Save data for restarting the analysis Off
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Solver type Large Problem Direct Sparse
Incompatible bonding options Simplified
Control technique: Force
Iterative technique: NR(Newton-Raphson)
Integration Method Newmark
Result folder SolidWorks document (F:\Students project\Rony)
Units Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 5
Material Properties
Model Reference Properties Components
Name: PVC Rigid Model type: Linear Elastic Isotropic
Default failure criterion:
Unknown
Tensile strength: 4.07e+007 N/m^2 Elastic modulus: 2.41e+009 N/m^2
Poisson's ratio: 0.3825 Mass density: 1300 kg/m^3
Shear modulus: 8.667e+008 N/m^2
SurfaceBody 1(Surface-Extrude1[1])(new profile_52.3m_three points_unsplitted), SurfaceBody 2(Surface-Extrude1[2])(new profile_52.3m_three points_unsplitted), SurfaceBody 3(Surface-Fill1)(new profile_52.3m_three points_unsplitted)
Curve Data:N/A
Name: Epoxy, Unfilled Model type: Linear Elastic Isotropic
Default failure criterion:
Unknown
Tensile strength: 2.8e+007 N/m^2 Compressive
strength: 1.04e+008 N/m^2
Elastic modulus: 2.415e+009 N/m^2 Poisson's ratio: 0.35
Mass density: 1100 kg/m^3
SurfaceBody 4(Split Line1)(new profile_52.3m_three points_unsplitted)
Curve Data:N/A
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 6
Loads and Fixtures
Fixture name Fixture Image Fixture Details
Fixed-1
Entities: 1 face(s) Type: Fixed Geometry
Resultant Forces Components X Y Z Resultant
Reaction force(N) -15635.4 350.009 1120.25 15679.4
Reaction Moment(N.m) -3.66328 428.451 54.2372 431.886
Load name Load Image Load Details
Force-1
Entities: 3 face(s) Type: Apply normal force
Value: 1.8e+006 N
Connector Definitions No Data
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 7
Contact Information
Contact Contact Image Contact Properties
Global Contact
Type: Bonded Components: 1 component(s)
Options: Compatible mesh
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 8
Mesh Information Mesh type Shell Mesh Using Surfaces
Mesher Used: Curvature based mesh
Jacobian check for shell On
Maximum element size 0.997694 m
Minimum element size 0.332561 m
Mesh Quality High
Mesh Information - Details
Total Nodes 6892
Total Elements 3330
Time to complete mesh(hh;mm;ss): 00:00:02
Computer name: VISHNU-PC
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 9
Sensor Details No Data
Resultant Forces
Reaction Forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -15635.4 350.009 1120.25 15679.4
Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m -3.66328 428.451 54.2372 431.886
Beams No Data
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 10
Study Results
Name Type Min Max
Stress1 VON: von Mises Stress at Step No: 50(5 Seconds)
0 N/m^2 Node: 1649
2.06108e+007 N/m^2 Node: 1644
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Stress-Stress1
Name Type Min Max
Displacement1 URES: Resultant Displacement at Step No: 50(5 Seconds)
0 mm Node: 1384
3504.13 mm Node: 1386
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 11
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Displacement-Displacement1
Name Type Min Max
Strain1 ESTRN: Equivalent Strain at Step No: 10(1 Seconds)
0 Element: 3307
0.00154468 Element: 576
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 12
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Strain-Strain1
Name Type
Response1 Nonlinear Response
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 13
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Response-Response1
Name Type Min Max
Displacement2 URES: Resultant Displacement at Step No: 100(10 Seconds)
0 mm Node: 1384
7162.71 mm Node: 1386
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 14
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Displacement-Displacement2
Name Type Min Max
Velocity1 VRES: Resultant Velocity at Step No: 100(10 Seconds)
0 mm/sec Node: 1384
730.022 mm/sec Node: 697
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 15
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Velocity-Velocity1
Name Type Min Max
Acceleration1 ARES: Resultant Acceleration at Step No: 100(10 Seconds)
0 mm/s^2 Node: 1384
12.1129 mm/s^2 Node: 1386
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 16
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Acceleration-Acceleration1
Name Type
Response2 Nonlinear Response
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 17
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Response-Response2
Name Type
Response3 Nonlinear Response
PUTHUSSERY
VISHNU R 29-Sep-16
Analyzed with SolidWorks Simulation Simulation of new profile_52.3m_three
points_unsplitted 18
new profile_52.3m_three points_unsplitted-Nonlinear with epoxy-Response-Response3
Conclusion Static structural analysis has been done on the model with similar boundary conditions and the obtained
results have been assessed thoroughly. Being a beam with above 50m span it was inevitable to do a
nonlinear study with large displacement option turned on. The results seems to be on par with the static
results for a time of 10 seconds and 0.1 second time step.