Non-Metallic Centrifugal
Process Pumps
Providing pump solutionsto industry, globally
2
an Intrax brand
Intrax is a global leader in specialist pumping equipment for difficult and challenging industrial applications.We are best known for excellence in bringing innovative and cost-saving ideas to our customers as well
as offering unrivalled levels of customer service and response times.
Our combined wealth of experience and technical know-how in highly sophisticated applications has allowedus to work closely with the engineering teams on large-scale projects across the globe firmly establishing
us as their trusted partner
Expertise Understanding Energy InnovationIntrax tackles aggressive and abrasive pumping challenges that conventional pump manufacturers shy away from. An in-depth cross organizational k nowledge of aggressive fluid handling and an association with leading polymer developers and foundries globally provides a level of exper tise disproportionate to the individual companies and brands.
The Intrax companies and brands have truly evolved to relieve customer pain points and hence bring a refreshingly different approach to the rigid stance often taken by market incumbents. Intrax products have also evolved i n t e l l i g e n t l y, i n f l u e n c e d b y individual customer’s demands, and this progress is on-going.
A relentless drive to improve on the status quo of high value pump installations. Intrax has a culture of market disruption bringing value to customers, ranging from small, yet significant, product modifications which address regional challenges, to in-depth R&D and new product designs.
Our partners often comment on the energy and motivation within our companies and how enjoyable it makes their interactions with us. We think that this is because of the ethos of our brilliant, highly-trained workforce who have been recruited to deliver cutting-edge solutions without the prejudices of a lifetime of offering conventional and often outdated technology.
INTRODUCTION
Leading Edge TechnologyTechniflo is the product of over 30 years experience in Non-Metallic centrifugal pump design, featuring state-of-the-art thrust balance technology and advanced manufacturing procedures.
Designed for the WorstDesigned for extended use in the most difficult duties, Techniflo pumps can be used with confidence on a full range of extremely corrosive, hazardous, toxic, explosive and dangerous chemicals.
Quality Tested, Proven Reliability and Performance Manufactured to the highest standards with a premium on Quality Control, every Techniflo pump is factory-tested to verify operational performance. Years of extended service in numerous installations are a testimony to the exceptional quality and reliability of Techniflo.
The Techniflo is a complete range of non-metallic sealless magdrive and sealed centrifugal pumps. Sealless mag-drive pumps means zero leakage. Techniflo mag-drive pumps have no mechanical seals or packed glands. Fluid is hermetically sealed from the driving end and the driving power is transmitted via magnetic force with powerful synchronous magnets.Sealed non-metallic pumps are an effective solution for corrosive particle laden fluids with a wide range of seal designs for applications where mag-drive design pumps are not viable from a budget perspective or suffer from excessive wear.All of the wetted parts in a Techniflo pump are chemically resistant and various combinations of engineered plastics, high grade ceramics, silicon carbide, and carbons are available depending on the application.
Rewards and BenefitsWith the interests of every pump user in mind, Techniflo delivers a number of significant rewards and benefits:
Exceptional quality and economic pricesLow operational and lifetime costsReduced downtime and increased productionEase of maintenanceUser health and safetyOperator confidenceEnvironmental protection
Two distinct ranges of pumps cover a wide range of applications from acid transfer to brine injection
3
TB Series
Techniflo mag drive lined pumps – TB seriesThe Techniflo non-metallic, mag drive lined pumps ensure reliable transfer for even the most corrosive chemicals. Thanks to innovative fluid path designs TB pumps can reliably pump both filtered and contaminated corrosive chemicals with the additional complication of abrasive suspended solids when required. The absence of a complex sealing system reduces operating costs and increases MTBF providing peace of mind for specifiers and operators globally.
Techniflo construction characteristics Heavy duty ductile iron casing with bonded ETFE lining Patented world first thrust balanced design (see page 5) Completely open impeller eye for reduced NPSH requirements and
increased efficiency One bolt size for ease of maintenance Fluid temperatures from -70°C to 121°C Supports system pressures up to 20.7 bar (300psi) Conform to ASME/ANSI B17.3 M footprint and flange dimensions Back pullout design - liquid end and drive end independently serviceable Flows up to 300m³/hr Heads up to 100m Liquid SG up to 2.5 Rare-earth magnets on all pumps Secondary containment design available Epoxy resin paint finish with all AAPU top coat Two bolt flanged drain, with optional tapping 100% replacement wearing parts
ANSI and ISO dimensional mag-drive non-metallic process pumps
4
Flows up to 300m³/hrHeads up to 100m
Typical Applications Petrochemical industry Volatile & low flashpoint liquids Mineral processing Chemical manufacturing Chemical processing Steel making industry Bio-diesel plants Fertiliser plants
Technical Illustration
One drive size per motor frame. Simple keyless design means assembly with motor shaft is quick and easy.Magnets bolted and sealed inside 316 stainless steel carrier.
Outer Magnet Assembly One-piece carbon fibre Teflon moulding for a combination ofstrength and chemical resistance.Patented reinforced socket for shaft mounting. Outer pressure housing made from a Kevlar composite.
Containment Shell
Dual carbon graphite or Sintered silicon carbide. Individually replaceable and flexibly-mounted for full alignment with shaft.
Radial BearingsUnique one-piece design with magnets potted and sealed inside 316 stainless steel cover, and all encapsulated in Teflon for optimum chemical resistance.
Impeller/ Mag Capsule
Mates flanged motors to the pump. Can mount a range of sizes directly without spacer plates. Integral foot mates to existing ANSI base plates.All mounting bolts conveniently accessed from outside the adapter to simplify motor/pump mating.
Adapter Extra heavy-duty one-piece cast ductile iron casting.Precisely aligns and supports the containment shell in the casing. Is separate from the adapter to allow servicing motor without opening the liquid end of the pump.
Containment Ring
Replaceable, straight, sintered silicon carbide shaft cantilevered from the containment shell.Oversized to safely handle all load combinations.Cantilever design leaves impeller suction open for best possible performance.
Shaft
Top centreline discharge, one-piece cast ductile iron with bonded Teflon lining. Lining minimum of 1/8" (3.175mm).Provides nearly universal corrosión resistance and extremely low maintenance.Casing drain is standard.
Casing
5
Head (m)
100
50
50 100 150 200
90
80
70
60
30
40
10
20
40302010 250
110
TB Series 2900rpm
3Flow m /hr
Head (m)
15
50 100 150 200
25
20
10
5
40302010 250
30
TB Series 1450rpm
300
4x3x6B
1.5x1x6A
3x2x6A
1.5x1x8B
3x2x6B
3x1.5x8B3x2x8C
4x3x8C
2x1x10C 3x1.5x10C3x2x10C
4x3x10C 4x3x10H6x4x10H
1.5x1x6LFA 6x4x8C
1.5x1x6A
3x2x6A
1.5x1x8B
3x2x6B
3x1.5x8B 3x2x8C
4x3x8C
2x1x10C 3x1.5x10C
3x2x10C
4x3x10C
4x3x6B
1.5x1x8LF
1.5x1x6LFA
2x1x10LF
6x4x8C
3Flow m /hr
6
TB SeriesPerformance Curves
Pump Size A B C D E1 E2 F G H J inlet/
outletBare
Pump kg
1.5 x 1 x 6A
3 x 2 x 6A
1.5 x 1 x 8B
3 x 2 x 6B
3 x 1.5 x 8B
4 x 3 x 6B
3 x 2 x 8C
4 x 3 x 8C
2 x 1 x10C
3 x 1.5 x 10C
3 x 2 x 10C
4 x 3 x 10C
4 x 3 x 10HC
6 x 4 x 8C
6 x 4 x 10C
133
133
133
210
210
210
210
210
210
210
210
210
210
254
254
165
165
165
209
216
209
241
279
216
216
241
279
279
343
343
298
298
298
419
425
419
451
489
425
425
451
489
489
597
597
300
300
300
281
316
350
306
372
351
361
306
372
372
477
477
152
152
152
248
248
248
248
248
248
248
248
248
248
248
248
0
0
0
184
184
184
184
184
184
184
184
184
184
184
184
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
221
287
287
312
287
287
287
287
287
287
287
287
287
287
287
184
184
184
318
318
318
318
318
318
318
318
318
318
318
318
40/25
80/50
40/25
80/50
80/40
100/80
80/50
100/80
50/25
80/40
80/50
100/80
100/80
150/100
150/100
34
39
59
63
64
75
67
83
93
96
101
107
113
113
116
L
370
324
394
394
414
414
414
414
414
414
414
414
414
414
414
E2 E1
H(Hole Diameter)
J
F
C
GL
outlet
inlet
D
B
A
7
TB SeriesDimensions
NOTE: Pump flanges are ANSI 150. Other drillings are available on request.Explosion-proof motors are available on request.Motor dimensions will vary depending on size and type used.All dimensions in millimetres.
8
The Techniflo SC Series is a heavy duty centrifugal pump range designed specifically to handle corrosive and aggressive fluids. An epoxy coated outer cast iron split casing supports a highly stable and robust PVDF or polypropylene liner. The Techniflo SC pumps have semi-open impellers and are available with either single or double mechanical seals for the most demanding applications both in terms of corrosion and suspended particles. Mechanical seals are designed for on-site replacement if required. Pumps are also available in vertical column sump pump design.
Flows to 500 m3/hr and heads to 100 m.
Technical Features Exceptionally robust design. Replaceable Inner volute casing and back plate. External ductile iron epoxy coated volute isolated from the pumped fluid. ISO dimensional pump range to allow for drop in replacement for existing
ISO pumps. ANSI flange drilling alternative. Robust and abrasion resistant PVDF or Polypropylene inner casings. Multiple mechanical seal options with no metallic components in fluid path.
Single external seal and double seal with thermosiphon designs. Injection moulded inner casing and impeller for maximum structural
strength and density. No metallic components in the fluid path.
8
SC SeriesISO dimensional non-metallic process pumps
Semi-open impeller designed to handle dirty fluids. MOC: high density injected PVDF or polypropylene. Excellent chemical resistance.
Mechanical Seal Options: a. Single external mechanical seal with no wetted metallic parts, suitable for clean fluids. b. Double mechanical seal with no wetted metallic parts and barrier fluid to ensure lubrication of seal faces and avoid crystallization. Designed for dirty fluids, pickling fluids, cristalizing fluids.
Robust bearing housing with internal epoxi coating and magnetic drain plug.
Oversized stainless Steel shaft protected by a non-metallic shaft sleeve.
ISO standard construction, optional ANSI flanges.
Heavy Duty split casing with double epoxy coating, not in contact with the fluid.
9
Technical Illustration
50
50 100 150 200
90
80
70
60
30
40
10
20
40302010
SC Series
Series 1-75 80x50x265 2900rpm
3Q - m /hr
ISO 80x50x200 2900rpmISO 65x40x200 2900rpm
ISO 50x32x200 2900rpm
ISO 40x25x160 2900rpm
ISO 50x32x160 2900rpmISO 65x50x160 2900rpm
ISO 80x65x200 2900rpm
Series 1-150 150x125x310 2900rpm
Series 1-80 100x80x200 2900rpm
Series 1-95 100x80x360 2900rpm
220
10
SC SeriesPerformance Curves
Dimensions
Mag drive lined pumpsThe PW-C pump series is a reliable mid-size general service pump range designed for tanker unloading and transfer duties of corrosive chemicals. The U-Mag pump range is aimed at replacement of alternative technology chemical pumps with slotted flanges enabling compatibility with ANSI, ISO o JIS piping connections.
Construction characteristics Heavy duty ductile iron casing with ETFE or PFA liners
and impellers Suitable for close coupling to IEC flange mounted
motors Simple modular design suitable for on-site repair Replaceable wear parts to minimize repair costs Excellent heat dissipation for demanding applications Range of bearing and shaft materials to ensure
compatibly with wide variety of fluids
Typical Applications PCB machines Electroplating solutions Fume scrubbers Salt & brine recirculation CIP cleaning systems Deionizing equipment Mineral processing solutions Bulk tank unloading
PW Series
11
PW SeriesThe Transfer and Tanker Unloading Pump
Technical Features Polypropylene and ETFE wet ends Closed-coupled IEC standard motors Flows up to 1400 L/min Heads up to 37 m Liquid SG up to 1.9 Liquid temperatures70°C for polypropylene90°C for ETFE Flanged ports with universal bolt pattern to match
Table E, DIN or ANSI 150 Rare-earth magnets above 2.2kW
12
Model W H L A B C D E F G inlet/outlet
motor size
350PW/-F
351PW/-F
352PW/-F
353PW/-F
400PW/-F
401PW/-F
402PW/-F
403PW/-F
405PW/-F
505PW/-F
507PW/-F
655PW/-F
657PW/-F
6510PW/-F
6515PW/-F
157
160
160
160
140
160
260
260
260
260
260
260
260
260
350
257
257
242
242
216
254
255
255
270
319
319
360
360
360
385
472
470
454.5
454.5
394
488
551
591
617
650.5
676.5
715
746
746
904
130
130
130
130
110
130
208
208
208
220
220
210
210
210
300
77.5
77.5
57
57
51
57.5
65
65
65
60
60
85
85
85
85
130
130
130
130
98
130
200
200
200
300
300
270
270
270
270
115
115
120
120
95
115
115
115
130
162
162
175
175
175
200
142
142
122
122
121
139
140
140
140
157
157
185
185
185
185
88
88
78
78
87
102.5
89
89
89
89.5
89.5
118
118
118
118
161
170
155
155
150
184
158
158
158
123.2
123.2
240
240
240
240
25/25
25/25
32/32
32/32
40/40
40/40
50/40
50/40
50/40
65/50
65/50
80/65
80/65
80/65
80/65
0.37kW
0.75kW
1.5kW
2.2kW
0.37kW
0.75kW
1.5kW
2.2kW
4.0kW
4.0kW
5.5kW
4.0kW
5.5kW
7.5kW
11.0kW
J K
181.5
181.5
177.5
177.5
125
148
158
158
158
360
360
158
249
249
287
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
Head (m)Head (m)40
36
32
28
24
20
16
12
8
4
40
35
30
25
20
15
10
5
0 10 20 30 40 50 60 70 800 10 20 30 40
PW Series
Flow (m³/hr)
350PW
351PW
352PW
353PW
405PW
400PW
401PW 402PW403PW
PW Series
Flow (m³/hr)
6515PW
6510PW
657PW
655PW
505PW
2900rpm 2900rpm0.37 - 4kW 4 - 11kW
507PW
Loutlet flange
K(hole diameter)
GCJ
inlet flange
A
W
E
D
H
J B
F
PW SeriesPerformance Curves
Dimensions
NOTE: Explosion-proof motors available on request. Motor dimensions may vary slightly depending on type used. All dimensions in millimetres.
13
Notes
14
Notes
15
Notes
9 Orgreave Close, SheffieldS13 9NP · United KingdomT: +44 114 [email protected]
Europe12 Selgar AveTonsley, SA, 5042 · AustraliaT: +61 8 8275 [email protected]
AustraliaRuta 33, Km 5,5 (Payro 2709)8000 Bahía Blanca · Argentina T: +54 291 488 5544www.allpumps.com.ar
Latin America4548 Industrial ParkwayCleveland OHT: +1 216 941 [email protected]
USA