Subject Code: ME853PE

DEPARTMENT OF MECHANICAL ENGINEERINGIV Year B. Tech., II-Sem.

Subject: RENEWABLE ENERGY SOURCESNote: - All Questions are mapped with Blooms Taxonomy Levels and Course Outcomes.

UNIT-I2-MARKS QUESTIONS

S.No. Questions Skills CO P.I1 List any two renewable sources of energy. Remember C422.1 1.4.1

2 Name the products that can be obtained from crude oil. Remember C422.1 1.3.1

3 What are conventional sources of energy? Understand C422.1 1.4.1

4 Define the energy. Remember C422.1 1.3.1

5 What are the different forms of energy? Understand C422.1 1.3.1

3-MARKS QUESTIONSS.No. Questions Skills CO P.I

1 Discuss any four differences between renewable and non-renewable sources. Understand C422.1 1.3.1

2 Name at least three greenhouse gases responsible for global warming. Remember C422.1 1.3.1

3 Explain various methods to extract geothermal energy Understand C422.1 1.4.1

4 Discuss the advantages and limitations of renewable energy sources? Understand C422.1 1.4.1

5 Explain a short note on role and potential of new and renewable sources? Understand C422.1 1.4.1

5-MARKS QUESTIONSS.No. Questions Skills CO P.I

1 What are the conventional sources of energy and explain briefly? Understand C422.1 1.3.1

2 What are the non-conventional sources of energy and explain briefly?

Understand C422.1 1.3.1

3 Describe briefly the Indian Energy Scenario. Remember C422.1 1.2.1

4 List the various energy resources and Discuss the need of these energy sources with special reference to India.

Remember C422.1 1.4.1

5 What is the difference between a green house and a green house gas? Explain with examples.

Understand C422.1 1.4.1

Subject Code: ME853PE

DEPARTMENT OF MECHANICAL ENGINEERINGIV Year B. Tech., II-Sem.

Subject: RENEWABLE ENERGY SOURCESNote: - All Questions are mapped with Blooms Taxonomy Levels and Course Outcomes.

UNIT-II2-MARKS QUESTIONS

S.No. Questions Skills CO P.I1 What are the main components of a flat plate solar collector? Understand C422.2 1.4.1

2 Define Solar Constant. Remember C422.2 1.3.1

3 State the principle involved in generating solar power. Remember C422.2 1.4.1

4 Write short note on total solar energy received in India. Understand C422.2 1.2.1

5 List any two applications of solar energy systems. Remember C422.2 1.4.1

3-MARKS QUESTIONSS.No. Questions Skills CO P.I

1 Describe the classification of solar energy collectors. Remember C422.2 4.1.1

2 Summarize the factor influencing solar power extraction. Understand C422.2 4.3.4

3 Explain about the applications of solar Photovoltaic system in rural areas. Understand C422.2 4.1.2

4 State the principle of solar photovoltaic power generation? Remember C422.2 4.3.2

5 Define solar altitude angle and incident angle. Remember C422.2 4.1.1

5-MARKS QUESTIONSS.No. Questions Skills CO P.I

1 Examine briefly the different types of solar energy measuring instruments. Apply C422.2 4.1.2

2 Write short notes on Solar Radiation and express the Estimation of average Solar Radiation.

Understand C422.2 4.2.2

3 With the help of a neat sketch describe a solar heating system using water heating solar collectors. What are the advantages and disadvantages of this method?

Understand C422.24.2.1

4 State the principle of solar photovoltaic power generation and What are the main elements of a PV system?

Remember C422.2 4.3.2

5 Classify the different methods of storing solar energy. Describe thermal energy storage systems.

Analyse C422.2 4.1.3

Subject Code: ME853PE

DEPARTMENT OF MECHANICAL ENGINEERINGIV Year B. Tech., II-Sem.

Subject: RENEWABLE ENERGY SOURCESNote: - All Questions are mapped with Blooms Taxonomy Levels and Course Outcomes.

UNIT-III2-MARKS QUESTIONS

S.No. Questions Skills CO P.I1 Define the wind power? Remember C422.3 7.1.1

2 List out the wind farms? Remember C422.3 6.1.1

3 What is meant by pitch angle? Understand C422.3 7.1.1

4 Define Tip speed ratio. Remember C422.3 7.2.1

5 What is meant by pitch control and Yaw control Understand C422.3 7.1.1

3-MARKS QUESTIONSS.No. Questions Skills CO P.I

1 How the wind mills are classified? Understand C422.3 6.1.1

2 What are the advantages and disadvantages of wind power? Understand C422.3 6.2.1

3 Define Vertical Axis Wind Turbine (VAWT). Remember C422.3 7.1.1

4 Describe a brief description on types of wind turbines. Understand C422.3 7.2.1

5 List two important wind turbine generator installations in India. Remember C422.4 7.1.1

5-MARKS QUESTIONSS.No. Questions Skills CO P.I

1 Describe briefly about the horizontal wind mills with neat sketch Remember C422.3 7.1.1

2 Describe briefly about the vertical wind mills with neat sketch? Understand C422.3 7.1.1

3 Explain with a neat diagram how wind energy can be converted into electrical energy. Understand C422.3 7.1.2

4 Derive the expression for power developed due to wind and What is meant by pitch control?

Create C422.3 7.2.2

5 Explain the advantages and disadvantages of wind energy conversion systems.

Understand C422.4 7.1.1

Subject Code: ME853PE

DEPARTMENT OF MECHANICAL ENGINEERINGIV Year B. Tech., II-Sem.

Subject: RENEWABLE ENERGY SOURCESNote: - All Questions are mapped with Blooms Taxonomy Levels and Course Outcomes.

UNIT-IV2-MARKS QUESTIONS

S.No. Questions Skills CO P.I1

2

3

4

53-MARKS QUESTIONS

S.No. Questions Skills CO P.I1

2

3

4

55-MARKS QUESTIONS

S.No. Questions Skills CO P.I1

2

3

4

5

Subject Code: ME853PE

DEPARTMENT OF MECHANICAL ENGINEERINGIV Year B. Tech., II-Sem.

Subject: RENEWABLE ENERGY SOURCESNote: - All Questions are mapped with Blooms Taxonomy Levels and Course Outcomes.

UNIT-V2-MARKS QUESTIONS

S.No. Questions Skills CO P.I1

2

3

4

53-MARKS QUESTIONS

S.No. Questions Skills CO P.I1

2

3

4

55-MARKS QUESTIONS

S.No. Questions Skills CO P.I1

2

3

4

5