Reliability is your Security Utilizing the latest advance design Oxygen Recombination Technology, Yuasa have applied their 80 years experience in the lead acid battery field to produce the optimum design of Sealed Lead Acid batteries. NPX valve regulated lead-acid batteries are designed for high rate discharge applications. These batteries are used primarily where high wattage is required for a short duration. With 50% more wattage available and a 30% reduction in size over conventional batteries, NPX batteries offer a superior value. Technical Features Sealed Construction Yuasa’s unique construction and sealing technique ensures no electrolyte leakage from case or terminals. Electrolyte Suspension System All NP batteries utilize Yuasa’s unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added. Control of Gas Generation The design of Yuasa’s NP batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use. Low Maintenance Operation Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free. Terminals NP batteries are manufactured using a range of terminals which vary in size and type. Please refer to details as shown. Operation in any Orientation The combination of sealed construction and Yuasa’s unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage. Valve Regulated Design The batteries are equipped with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge. Note. On no account should the battery be charged in a sealed container. NPX SERIES - NPX-100R Data Sheet General Specifications www.yuasabatteries.com NPX Terminals Nominal Capacity (Ah) NPX-100 20hr to 1 .75vpc 28 W/Cell to 1.67 End Voltage (15min. rate) Voltage 12 Energy Density (Wh./L. 3 10hr) Specific Energy (Wh./kg.10hr) Int. Resistance (m.Ohms) 6.5 Maximum discharge (A) 360 Short Circuit current (A) 840 Dimensions (mm) Length 166 Width 125 Height overall 175.0 Weight (Kg) 9.30 Terminal M5 Layout 2 Terminal Torque Nm - 95 83.1 30.8 Layout
Transcript
Reliability is your SecurityUtilizing the latest advance design OxygenRecombination Technology, Yuasa have appliedtheir 80 years experience in the lead acid batteryfield to produce the optimum design of SealedLead Acid batteries.
NPX valve regulated lead-acid batteries are designed for
high rate discharge applications. These batteries are used
primarily where high wattage is required for a short duration.
With 50% more wattage available and a 30% reduction in
size over conventional batteries, NPX batteries offer a
superior value.
Technical FeaturesSealed ConstructionYuasa’s unique construction and sealing techniqueensures no electrolyte leakage from case or terminals.
Electrolyte Suspension SystemAll NP batteries utilize Yuasa’s unique electrolyte suspensionsystem incorporating a microfine glass mat to retain themaximum amount of electrolyte in the cells. The electrolyte isretained in the separator material and there is no freeelectrolyte to escape from the cells. No gels or othercontaminants are added.
Control of Gas GenerationThe design of Yuasa’s NP batteries incorporates the very latestoxygen recombination technology to effectively control thegeneration of gas during normal use.
Low Maintenance OperationDue to the perfectly sealed construction and therecombination of gasses within the cell, the battery is almostmaintenance free.
TerminalsNP batteries are manufactured using a range of terminals whichvary in size and type. Please refer to details as shown.
Operation in any OrientationThe combination of sealed construction and Yuasa’s uniqueelectrolyte suspension system allows operation in anyorientation, with no loss of performance or fear of electrolyteleakage.
Valve Regulated DesignThe batteries are equipped with a simple, safe, low pressureventing system which releases excess gas and automaticallyreseals should there be a build up of gas within the battery dueto severe overcharge. Note. On no account should the battery becharged in a sealed container.
NPX SERIES - NPX-100R Data Sheet
GeneralSpecifications
www.yuasabatteries.com NPX
Terminals
Data Sheet NP SERIES - NP 24-12
www.yuasabatteries.com NP
Reliability is your Security Utilizing the latest advance design Oxygen Recombination Technology, Yuasa have applied their 80 years experience in the lead acid battery field to produce the optimum design of Sealed Lead Acid batteries. FEATURES Superb recovery from deep discharge. Electrolyte suspension system. Gas Recombination. Multipurpose: Float or Cyclic use. Usable in any orientation. Superior energy density. Lead calcium grids for extended life. Manufactured World wide. Application specific designs.
TerminalsNP batteries are manufactured using a range of terminals which vary in size and type. Please refer to details as shown.
Operation in any Orientation The combination of sealed construction and Yuasa’s unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage.
Valve Regulated Design The batteries are equipped with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery dueto severe overcharge. Note. On no account should the battery be charged in a sealed container.
Technical Features Sealed Construction Yuasa’s unique construction and sealing technique ensures no electrolyte leakage from case or terminals.
Electrolyte Suspension System All NP batteries utilize Yuasa’s unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added. Control of Gas Generation The design of Yuasa’s NP batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.
Low Maintenance Operation Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free.
GeneralSpecifications
Layout Terminals
Nominal Capacity (Ah) NP24-12I
20hr to 1 .75vpc 30ºC 2410hr to 1.75vpc 20ºC 22.35hr to 1 .70vpc 20ºC 20.41hr to 1.60vpc 20ºC 14.4Voltage 12Energy Density (Wh.L.20hr) 79Specific Energy (Wh.kg.20hr) 32Int. Resistance (m.Ohms) 9.5Maximum discharge (A) 240Short Circuit current (A) 500Dimensions (mm)
W/Cell to 1.67 End Voltage (15min. rate) Voltage 12
Energy Density 28.7(Wh./L.3 10hr)
Specific Energy 28.7 (Wh./kg.10hr)
Int. Resistance (m.Ohms) 6.5
Maximum discharge (A) 360
Short Circuit current (A) 840
Dimensions (mm)
Length 166
Width 125
Height overall 175.0
Weight (Kg) 9.30
Terminal M5
Layout 2
Terminal Torque Nm -
95
83.1
30.8Layout
Data Sheet NPX SERIES - NPX-80
www.yuasabatteries.com NPX
Reliability is your Security Utilizing the latest advance design Oxygen Recombination Technology, Yuasa have applied their 80 years experience in the lead acid battery field to produce the optimum design of Sealed Lead Acid batteries.
NPX valve regulated lead-acid batteries are designed for high rate discharge applications. These batteries are used primarily where high wattage is required for a short duration. With 50% more wattage available and a 30% reduction in size over conventional batteries, NPX batteries offer a superior value.
TerminalsNPX batteries are manufactured using a range of terminals which vary in size and type. Please refer to details as shown.
Operation in any Orientation The combination of sealed construction and Yuasa’s unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage.
Valve Regulated Design The batteries are equipped with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery dueto severe overcharge. Note. On no account should the battery be charged in a sealed container.
Technical Features Sealed Construction Yuasa’s unique construction and sealing technique ensures no electrolyte leakage from case or terminals.
Electrolyte Suspension System All NPX batteries utilize Yuasa’s unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added. Control of Gas Generation The design of Yuasa’s NPX batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.
Low Maintenance Operation Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free.
GeneralSpecifications
Layout Terminals
Nominal Capacity (Ah) NPX-8020hr to 1 .75vpc 20W/Cell to 1.67 End Voltage (15 min. rate) 80
Voltage 12Energy Density (Wh./L.3
10hr) 83.2Specific Energy (Wh./kg.10hr) 31.2
Int. Resistance (m.Ohms) 7.5
Maximum discharge (A) 360Short Circuit current (A) 780
Dimensions (mm)
Length 181
Width 76.2
Height overall 167.0Weight (Kg) 6.60
Terminal E
Layout 2Terminal Torque Nm -
Data Sheet NPX SERIES - NPX-100
Distributed by Yuasa Battery Inc. 2901 Montrose Ave
Laureldale, PA 19605 www.yuasabatteries.com
Registered number 1548820
Cat. No. NPX-100 February 09
Lead Calcium Grids The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications and give unparalleled recovery from deep discharge.
Long Cycle Service Life Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected.
Float Service Life The expected service life is five years in float standby applications.
Separators The use of the special separator material provides a very efficient insulation between plates preventing inter-plate short circuits and prohibiting the shedding of active materials.
Long shelf Life The extremely low self discharge rate allows the battery to be stored for extended periods up to one year at normal ambient temperatures with no permanent loss of capacity.
Operating Temperature Range The batteries can be used over a broad temperature range permitting considerable flexibility in system design and location. Charge – 15°C to 50°C Discharge – 20°C to 60°C Storage – 20°C to 50°C (fully charged battery)
Self Discharge Characteristics
Cyclic Recharge Regime
Float Charge Characteristics
Discharge Characteristic Curves
NPX Watts per Cell to 1.67 End Voltage5 Min 10 Min 15 Min 20 Min
