NUCOR UTILITY BUILDINGS
Combine the Strength of Steel with the Finishing Qualities of Wood
Most parts are FACTORY
ASSEMBLED reducing the
need for cutting and fitting
in the field
Fabricated by a company
with the highest QUALITY
standards in the Industry
All Components MADE IN
THE USA
NUCOR UTILITY BUILDINGS
Advantages of Galvanized Steel
WILL NOT WARP OR ROT over
time due to damp environments
IMPERVIOUS TO INSECTS like
termites and other destructive
pests that can damage a buildings
structure
NON COMBUSTIBLE so it will not
contribute to the spread of fire
NUCOR UTILITY BUILDINGS
As easy to finish as a wood
structure
Steel studs and trusses 2’ on
center
5 ½” studs are Prepped with
web holes for wiring, water or
gas lines
Will accept residential
insulation systems
Easily finished with Drywall,
OSB, Steel Liner, wood
paneling, etc.
NUCOR UTILITY BUILDINGS
Lightweight parts virtually eliminate the need for heavy material handling equipment
NUCOR UTILITY BUILDINGS
Lightweight panelized factory assembled walls sections
NUCOR UTILITY BUILDINGS
Simple Slab Foundations Reduce Foundation Costs
Easy to install concrete anchors provided with the building
NUCOR UTILITY BUILDINGS
Door and window openings factory framed into the wall sections
NUCOR UTILITY BUILDINGS
Overhead doors framed with header that sits into pockets in adjacent wall sections
NUCOR UTILITY BUILDINGS
Lightweight factory assembled steel trusses – 4 on 12 roof pitch (standard)
1 ½” roof hat channels 2’ on center
NUCOR UTILITY BUILDINGS
13 Available Building Footprints
•12x18x10•18x24x10•18x30x10•24x24x10•24x36x10•30x36x10•30x48x10•30x54x10•24x24x12•24x36x12•30x36x12•30x48x12•30x54x12
NUCOR UTILITY BUILDINGS
Sheeting and trims
•Heavy Duty 26 gauge “Classic” wall and “Classic” roof sheeting.
•26 gauge wall and roof line trims
•All available in our 8 Standard SiliconizedPolyester colors.
NUCOR UTILITY BUILDINGS
Available Load Cases (in accordance with IBC 2009 and 2006)
•Load Case 1•30 ground snow / 90 wind / exposure C / occupancy importance factor 1.0
•Load Case 2•20 live load / 110 wind / exposure C / occupancy importance factor 1.0
•Load Case 3•60 ground snow/ 90 wind / exposure C / occupancy importance factor 1.0
Seismic Design Category C.
NUCOR UTILITY BUILDINGS
Accessories from the Manufacturer
NUCOR UTILITY BUILDINGS
Service Doors (White ONLY)
Aluminum FramePre hung Reversible 24 gauge. door leaf 1 ¾” thickInjected polyurethane foam insulation, R113 - 12 gauge. Zinc plated steel pin hinges3 ½” wide .060” thick aluminum frameGrade 2 knob lockWhite finish coatBulb style weather strippingWindow light options – 22” x 36”clear view or 9 light grillRough opening size is same as standard residential door 38” x 82”
NUCOR UTILITY BUILDINGS
Windows (White ONLY)
3’ x 4’ Single hung Vinyl Insulated window w/ nail flangeAvailable with or without Grille inserts
NUCOR UTILITY BUILDINGS
Roll Up Doors (White ONLY)
26 gauge spring assist manual roll up doors(un-insulated)
Easy installation
Available sizes (depending on floor plan)
10’ eave height only
6x8 8x8 10x8
12’ eave height only
10x10
NUCOR UTILITY BUILDINGS
Additional information
•Sheeting will not be deleted for framed openings
•Gutters and downspouts are not available at this time
•Buildings cannot accommodate a curb wall
•Buildings are not available for sale in Canada at this time
NUCOR UTILITY BUILDINGS
Warranties
1 Year Building Warranty
25 year panel finish Warranty
NUCOR UTILITY BUILDINGS
Active once the building ships
Comprehensive construction
manual customized to each
building order
NUCOR UTILITY BUILDINGS
Aid of Construction Video available
NUCOR UTILITY BUILDINGS
NUCOR UTILITY BUILDINGS