OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 1
QCF
NVQ in Occupational Health and Safety OCR Level 3 NVQ Certificate in Occupational Health and Safety
Scheme code 10176
OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice
Scheme code 10177
Cen
tre
Han
dboo
k
Contents
2 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
Contents
1 Introduction 4
1.1 The OCR NVQ Occupational Health and Safety suite of qualifications 4 1.2 Administration arrangements for these qualifications 4 1.3 What is the Qualifications and Credit Framework (QCF)? 5 1.4 If centre staff have queries 5 1.5 Documentation updates 5
2 General information 6
2.1 Qualification profile 6 2.2 Target market 8 2.3 Qualification aims 8 2.4 Entry requirements 8 2.5 Unique Learner Number (ULN) 8 2.6 Progression opportunities 9 2.7 Supporting OCR candidates 9 2.8 Wider issues 9 2.9 Guided learning hours 10 2.10 Funding 10 2.11 Mode of delivery 10 2.12 Resources 11 2.13 Delivery in Wales and Northern Ireland 11 2.14 Access arrangements and special consideration 11 2.15 Results enquiries and appeals 12 2.16 Centre malpractice guidance 12
3 Assessment 13
3.1 Assessment: How it works 13 3.2 Initial assessment of candidates 13 3.3 Assessment planning 13 3.4 Making assessment decisions 14 3.5 Methods of assessment 14 3.6 Examining the evidence 16 3.7 Observation 17 3.8 Questioning 17 3.9 Professional discussion 18 3.10 Witness testimonies 18 3.11 Personal statements 18 3.12 Performance evidence 19 3.13 Where evidence comes from 19 3.14 Real work 19 3.15 Simulation 19 3.16 Medium that can be used 20 3.17 Amount of evidence needed 20 3.18 Cumulative assessment record (CAR) 20 3.19 Verification – how it works 21
4 Assessor and Internal verifier/quality assurer Requirements 23
Contents
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 3
4.1 Assessment Centre Requirements 23 4.2 Assessors 23 4.3 Internal verifiers/quality assurers 24
5 Certification 25
5.1 Claiming certificates 25 5.2 Replacement certificates 25
6 Qualification structure and units 26
6.1 Qualification structure 26 6.2 Unit format 28 6.3 Units 29
7 Administration arrangements 30
7.1 Overview of full process 30
8 Supporting Documentation 31
8.1 OCR assessment material 31
9 Guidance For Candidates 32
9.1 What is the NVQ Occupational Health and Safety suite? 32 9.2 What do I have to do to achieve these qualifications? 32 9.3 What if I cannot gain enough credits for a full qualification? 34 9.4 How do I know that these qualifications are right for me? 34 9.5 How are the units assessed? 34 9.6 Do I need to pass all of the units? 34 9.7 How do I keep track of my achievements? 34 9.8 Can my work for these qualifications prepare me for my Functional Skills? 35
10 Mapping and Signposting 36
10.1 National Occupational Standards (NOS) Mapping 36
11 Further Support and Information 37
11.1 Enquiries 37 11.2 Results enquiries 37 11.3 Customer feedback 37 11.4 OCR Training Events 38 11.5 OCR Publications 38 11.6 Documents related to these qualifications 38
12 Glossary 39
Introduction
4 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
1 Introduction
This centre handbook provides information for centre staff involved in the planning, delivery and assessment of the following qualifications which have been accredited onto the Qualifications and Credit Framework (QCF).
OCR Level 3 NVQ Certificate in Occupational Health and Safety 10176
OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice 10177
It is important that centre staff involved in the delivery of the above qualifications understand the requirements laid down in this handbook. Centres should therefore ensure that all staff involved in the delivery of these qualifications have access to this document.
1.1 The OCR NVQ Occupational Health and Safety suite of qualifications
The OCR NVQ Occupational Health and Safety suite of qualifications provides candidates with high quality, nationally recognised qualifications. They are vocationally-related, credit-based qualifications that provide valuable opportunities for individuals to develop skills, gain underpinning knowledge and understanding and demonstrate competence in the workplace. They support achievement of Key Skills/Functional Skills/Essential Skills and relate to national occupational standards (NOS).
The awarding body for these qualifications is Oxford Cambridge and RSA Examinations (OCR) and the regulatory body is the Office of Qualifications and Examinations Regulation (Ofqual).
These qualifications have been accredited onto the Qualifications and Credit Framework (QCF). They are endorsed by ProSkills, the sector body for the health and safety sector.
1.2 Administration arrangements for these qualifications
A separate publication, the Admin guide: Vocational Qualifications (A850), provides details of the administration arrangements for these qualifications. The Admin Guide is available to download from our website: www.ocr.org.uk.
Introduction
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 5
1.3 What is the Qualifications and Credit Framework (QCF)?
The QCF is a unit and credit-based regulatory framework which replaces the National Qualifications Framework (NQF). It is a way of recognising skills and qualifications by awarding credit for qualifications and units achieved.
1.4 If centre staff have queries
This Centre Handbook and the Admin Guide contain all the information needed to deliver and administer these qualifications. If centre staff have any queries about these qualifications that are not answered in these publications, they should refer to the section Further support and information for details of who to contact. Support is also available on the OCR webpages for these qualifications.
1.5 Documentation updates
The information provided in this handbook was correct at the time of production. Occasionally OCR may update this information. Please refer to the qualification webpages at www.ocr.org.uk for details regarding updates to these qualifications. The latest version of this handbook is available to download from the OCR website.
General Information
6 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
2 General information
2.1 Qualification profile
Title OCR Level 3 NVQ Certificate in Occupational Health and Safety
OCR code 10176
QAN 600/0101/X
Level This qualification has been accredited on to the Qualifications and Credit Framework (QCF) at Level 3
Qualification structure
To achieve this qualification, candidates must complete a minimum total of 31 credits; 23 credits from mandatory units and a minimum of 8 credits from optional units.
Pre-16 16-18 18+ 19+ Age group approved
This qualification is suitable for
Those that wish to develop their skills, knowledge and understanding of Occupational Health and Safety. Candidates should have some responsibility for the health, safety and welfare of others. They should have a reasonable degree of authority and autonomy and have access to higher levels of management in their organisation and have the opportunity to research information and implement their recommendations.
Entry requirements
There are no formal entry requirements for this qualification.
Assessment These qualifications are pass/fail.
These qualifications are internally assessed by centre staff and externally verified by OCR Assessors.
Funding For details on eligibility for public funding please refer to the following websites:
http://www.dcsf.gov.uk/section96/
http://skillsfundingagency.bis.gov.uk/
Performance figures
For information on this qualification’s contribution to performance measurement please see the Ofqual’s Register of Regulated Qualifications: http://register.ofqual.gov.uk/
Last entry date* 31/12/2013
Last certification date*
31/12/2016
*OCR will inform centres of changes to these dates. Please refer to our website www.ocr.org.uk for current dates. All centre records must be updated accordingly.
General Information
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 7
Title OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice
OCR code 10177
QAN 600/0006/5
Level This qualification has been accredited on to the Qualifications and Credit Framework (QCF) at Level 5
Qualification structure
To achieve this qualification, candidates must complete a total of 108 credits from 10 mandatory units.
Pre-16 16-18 18+ 19+ Age group approved
This qualification is suitable for
Those with specific responsibilities for the health, safety and welfare of others. They will have a significant degree of authority and autonomy and be in a position to influence policies and procedures in their organisation and to implement changes relating to health and safety. They will probably be part of the senior management team and possibly be budget holders.
Entry requirements
There are no formal entry requirements for this qualification.
Assessment These qualifications are pass/fail.
These qualifications are internally assessed by centre staff and externally verified by OCR Assessors.
Funding For details on eligibility for public funding please refer to the following websites:
http://www.dcsf.gov.uk/section96/
http://skillsfundingagency.bis.gov.uk/
Performance figures
For information on this qualification’s contribution to performance measurement please see the Ofqual’s Register of Regulated Qualifications: http://register.ofqual.gov.uk/
Last entry date* 31/12/2013
Last certification date*
31/12/2016
*OCR will inform centres of changes to these dates. Please refer to our website www.ocr.org.uk for current dates. All centre records must be updated accordingly.
General Information
8 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
2.2 Target market
These qualifications are designed to reflect the requirements and activities of those that work at different levels to monitor (level 3) and to develop and implement (level 5) health and safety systems in the workplace. In some cases, candidates may have additional or other duties.
2.3 Qualification aims
The aim of these qualifications is to recognise the skills and competencies of candidates in the workplace.
These qualifications are about the development and implementation of good practice in health and safety matters in the workplace. Candidates will have a great deal of authority, influence and autonomy and will be required to make decisions within agreed limits and boundaries.
2.4 Entry requirements
These qualifications are available to anyone who is capable of reaching the required standards. They have been developed free from any barriers that restrict access or progression thereby promoting equal opportunities.
All centre staff involved in the assessment or delivery of these qualifications should understand the requirements of the qualification and match them to the needs and capabilities of individual candidates before entering them as candidates for one of these qualifications.
There are no formal requirements for entry to these qualifications.
2.5 Unique Learner Number (ULN)
It is an Ofqual requirement that Awarding Bodies must capture the Unique Learner Number (ULN) for all candidates who have claimed certification for these qualifications. Where a candidate has a ULN, you should enter their number in the ULN field of the entry form. For candidates who do not have a ULN, a claim will still be accepted if you leave this field blank, however, OCR will not be able to send these achievements to the Diploma Aggregation Service. Further information about this can be found in the Admin guide: Vocational Qualifications (A850) available to download from www.ocr.org.uk.
General Information
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 9
2.6 Progression opportunities
These qualifications have been designed to encourage progression. Candidates are able to progress from the OCR Level 3 NVQ Certificate in Occupational Health and Safety to the OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice, specialist qualifications from IOSH or into Higher Education.
2.7 Supporting OCR candidates
Centres should ensure that candidates are informed of the title and level of the qualification they have been entered for and that Oxford Cambridge and RSA Examinations (OCR) is the awarding body for their chosen qualification.
Centre staff should provide guidance to candidates on the assessment process and help candidates prepare for assessment. Full details on how the units are assessed are in sections 3 and 6 of this centre handbook.
2.8 Wider issues
These qualifications provide potential for centres to develop candidates’ understanding of spiritual, moral, ethical, social and cultural issues and heighten candidates’ awareness of environmental issues, health and safety considerations and European developments.
Spiritual, moral, ethical, social and cultural issues
Centre staff delivering a course that supports these qualifications would have opportunities to address spiritual, moral, ethical, social and cultural issues.
For example, candidates will need to understand the moral duty of care that each person owes to another. Candidates will also need to develop an in-depth knowledge of health and safety legislation and how cultural issues such as religion, religious beliefs and social background contribute to the interpretation and implementation of legislation.
Environmental issues, health and safety considerations and European developments
Centre staff delivering a course that supports these qualifications may have opportunities to address environmental issues, health and safety considerations and European developments depending on the method of delivery/choice of teaching materials.
For example, candidates will need to be aware of the influence of the EU in aspects of health and safety and how this supports in the free movement of labour across member states. Candidates
General Information
10 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
will also need to understand how health and safety legislation impacts on environmental issues such as control or noise or the control and disposal of hazardous waste and the use of less environmentally damaging materials. Environmental issues are addressed specifically in Unit 7 of the Level 3 certificate.
2.9 Guided learning hours
Each of the units in these qualifications are allocated a number of guided learning hours (glh) which indicates the approximate number of hours for teacher supervised or directed study time and assessment. Information on unit glh for these qualifications is given in section 6.
2.10 Funding
These qualifications are accredited at Levels 3 and 5 of the Qualifications and Credit Framework and are eligible for funding under Section 96 and/or Skills Funding Agency. For details on eligibility for public funding please refer to the following websites:
http://www.dcsf.gov.uk/section96/
http://skillsfundingagency.bis.gov.uk/
2.11 Mode of delivery
OCR does not specify the mode of study or specify a time limit for the achievement of these qualifications other than the expiry dates for entry and certification laid down by the regulatory authorities detailed in the qualification profiles.
Centres are free to deliver these qualifications using any mode of delivery that meets the needs of their candidates. Whatever mode of delivery is used, centres must ensure that candidates have appropriate access to the resources identified below.
Centres should consider the candidates’ complete learning experience when designing learning programmes. This is particularly important in relation to candidates studying part time alongside real work commitments where candidates may bring with them a wealth of experience that should be utilised to maximum effect by centre staff.
General Information
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 11
2.12 Resources
OCR strongly advises that teaching and development of subject content and associated skills be referenced to real vocational situations, through the utilisation of appropriate work-based contact, vocationally experienced delivery personnel, and real life case studies.
Candidates should be encouraged to read around the subject and have an appropriate knowledge of the application of the appropriate legislation.
Centres should ensure that appropriate physical resources are made available to candidates.
Centres will need to provide appropriate assessment facilities for candidates that comply with the regulations laid down by OCR in the Admin guide: Vocational Qualifications (A850) and the JCQ Instructions for Conducting Examinations, available on the OCR website www.ocr.org.uk.
Centres will need to meet the above requirements when they seek centre approval from OCR.
2.13 Delivery in Wales and Northern Ireland
The specification for these qualifications has only been approved by Ofqual for delivery in England/Wales/Northern Ireland during the life of the qualifications.
The specification for these qualifications has been approved by the Department for Children, Education, Lifelong Learning and Skills (DCELLS) for use by centres in Wales and by the Council for the Curriculum Examinations and Assessment (CCEA) for use by centres in Northern Ireland.
Candidates in Wales or Northern Ireland should not be disadvantaged by terms, legislation or aspects of government that are different from those in England. Where such situations might occur, including in the external assessment, the terms used have been selected as neutral so that candidates may apply whatever is appropriate to their own situation.
We will provide specifications, assessments and supporting documentation in English.
Further information concerning the provision of assessment materials in Welsh and Irish may be obtained from the OCR Customer Contact Centre: 024 76 851509.
2.14 Access arrangements and special consideration
Adjustments to standard assessment arrangements are made on the basis of the individual needs of candidates.
It is important, therefore, that centres identify as early as possible whether candidates have disabilities or particular difficulties that will put them at a disadvantage in the assessment situation
General Information
12 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
and select an appropriate qualification or adjustment that will allow them to demonstrate attainment.
The responsibility for providing adjustments to assessment is one which is shared between OCR and the centre. Centre staff should consult the consult the Joint Council of Qualifications’ (JCQ) booklet Access Arrangements, Reasonable Adjustments and Special Consideration www.jcq.org.uk. This document should also be referred to for those candidates who may require a post examination adjustment, special consideration (to reflect temporary illness, indisposition or injury), at the time of the examination/assessment.
For further guidance on access arrangements and special consideration please refer to OCR’s Admin guide: Vocational Qualifications (A850) on the OCR website www.ocr.org.uk.
2.15 Results enquiries and appeals
Please refer to the Admin guide: Vocational Qualifications (A850) which can be downloaded from the OCR website www.ocr.org.uk
2.16 Centre malpractice guidance
It is the responsibility of the Head of Centre* to report (in writing) all cases of suspected malpractice involving centre staff or candidates, to the OCR Standards Division.
When asked to do so by OCR, Heads of Centres are required to investigate instances of malpractice promptly, and report the outcomes to the OCR Standards Division.
Further information is contained in the JCQ publication: Suspected Malpractice in Examinations and Assessments which is available from www.jcq.org.uk together with OCR’s Malpractice Procedures – A Guide for Centres.
* The Head of Centre is defined as the most senior officer in the organisation, directly responsible for the delivery of OCR qualifications, eg the Principal of a College, the Head Teacher of a school, the Managing Director of a Private Training Provider or the Group Training Manager of a major company.
Assessment
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 13
3 Assessment
3.1 Assessment: How it works
In order for candidates to be able to effectively progress towards meeting the requirements of each assessment criterion, teachers/tutors must make sure that the supporting knowledge, understanding and skills requirements for each criterion are fully addressed. The identified knowledge, understanding and skills in the unit are not exhaustive and may be expanded upon or tailored to particular contexts to which the unit is being taught and the assessment criteria applied.
We recommend that teaching and development of subject content and associated skills be referenced to real life situations, through the utilisation of appropriate work-based contact, vocationally experienced delivery personnel, and real life case situations.
When assessors are satisfied that the candidate has met all of the requirements for a unit, they must confirm this by signing an evidence record sheet for that unit to show that the assessment process is complete.
Centre assessed and OCR verified
3.2 Initial assessment of candidates
It is important for centres to carry out some form of initial assessment that identifies what competence and knowledge a candidate already has and the gaps that they need to look at. This will help plan the assessment because it allows assessors to help candidates understand the best place to start collecting evidence. It will also identify units which candidates might have difficulty finishing.
3.3 Assessment planning
Assessors must take responsibility for assessment planning with candidates. This will involve agreeing a number of issues with candidates including:
finding the best source of evidence to use for particular units
finding the best way of assessing the candidate
confirming the best times, dates and places for the assessments to take place.
Assessment
14 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
Assessors must make a note of their assessment planning and regularly give feedback to candidates.
3.4 Making assessment decisions
It is not necessary for candidates to meet all the criteria every time they carry out an activity but it is necessary that all candidates produce their own evidence to meet all assessment criteria. They must consistently provide enough evidence for assessors to believe that the candidate is competent in their working environment.
In line with the Learning and Development assessment standards (e.g. A1), assessors should:
plan with the candidates
assess candidate performance, knowledge and understanding
look at the evidence
question and give feedback to the candidate working towards these qualifications.
They should also be satisfied that the candidate has demonstrated competence when meeting the assessment criteria.
All criteria must be completed before the assessor can sign the unit off as complete.
Full details of the administration arrangements associated with these qualifications are included in the Admin guide: Vocational Qualifications (A850) which can be downloaded from the OCR website www.ocr.org.uk.
3.5 Methods of assessment
It is the assessor’s responsibility to agree the best method of assessing a candidate in relation to their individual circumstances. The methods agreed must be:
valid
reliable
safe and manageable
suitable to the needs of the candidate.
Assessment
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 15
Valid
A valid assessment method is one that is capable of measuring the knowledge or skills in question. For example, a written test cannot measure a candidate’s practical skills or their ability to work well with others.
Validity can also be compromised if a candidate does not understand what is required of them. For example, one valid method of assessing a candidate’s knowledge and understanding is to question them. If the questions posed are difficult for the candidate to understand (not in terms of the content but the way they are phrased, for example), the validity of the assessment method is questionable.
As well as assessment methods being valid, the evidence presented must also be valid.
For example, it would not be appropriate for a candidate to present the organisation’s emergency response systems and procedures (Level 5, Unit 8) unless the candidate had made a substantial and identifiable input into their development and implementation.
Reliable
A reliable method of assessment will produce consistent results for different assessors on each assessment occasion. Internal verifiers/quality assurers must make sure that all assessors’ decisions are consistent.
Safe and manageable
Assessors and internal verifiers/quality assurers must make sure that the assessment methods are safe and manageable and do not put unnecessary demands on the candidate and/or the organisation they work for.
Suitable to the needs of the candidate
OCR has tried to make sure that achievement of these qualifications are free from constraints outside the requirements of the candidate’s job role.
For candidates who have access requirements please see section 2.14 of this handbook.
If centre staff think that any aspect of these qualifications unfairly restricts access and progression, they should talk to their OCR external verifier about this.
OCR in partnership with ProSkills and other awarding bodies have identified the following main assessment methods which are suitable for these qualifications:
direct observation of practice by a qualified assessor or by the expert witness for occupational specific units
examining the evidence by an assessor
Assessment
16 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
questioning the candidate or witness by an assessor
In some situations, the assessor can speak to the candidate to provide evidence of the candidate’s performance and knowledge (see Professional discussion).
3.6 Examining the evidence
Only approved and qualified assessors (see Assessor and internal verifier/quality assurer requirements) may examine the evidence for the assessment of these qualifications.
Evidence can:
reflect how the candidate carried out the process
be the product of a candidate’s work
be a product relating to the candidate’s competence.
For example:
The process that the candidate carries out could be recorded in an observation or witness testimony. It is the assessor’s responsibility to make sure that the evidence a candidate submits for assessment meets the requirements of the qualification.
The product of a candidate’s work could be:
Risk assessments carried out by the candidate
Health and safety training devised and/or delivered by the candidate
Results of health and safety inspections conducted by the candidate
Results and findings of accident investigations carried out by the candidate.
* These are examples of what a candidate may present, however, is not a definitive list. The examples are not exhaustive.
After the assessor has examined the evidence, the assessor must record an assessment decision and the justification for the decision. The assessor should also give feedback to the candidate.
Assessment
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 17
3.7 Observation
Only approved and qualified assessors (see Assessor and Internal verifier/quality assurer requirements) may carry out observations for the assessment of these qualifications.
The assessor and candidate should plan observations together, however, it is the assessor’s responsibility to record the observation properly.
After the observation has taken place, the assessor needs to record an assessment decision and the justification for the decision. The assessor should also give feedback to the candidate.
3.8 Questioning
Only approved and qualified assessors (see Assessor and internal verifier/quality assurer requirements) may question a candidate or witness for the assessment of these qualifications.
Questioning the candidate is normally an ongoing part of the assessment process, and is necessary to:
test a candidate’s knowledge of facts and procedures
check if a candidate understands principles and theories and
collect information on the type and purpose of the processes a candidate has gone through.
Assessors should ask open questions; that is questions where the candidate has to give an answer (other than ‘yes’ or ‘no’). Assessors should also be careful to avoid complicated questions which may confuse the candidate.
It is important that assessors record assessment decisions after they have questioned the candidate. They must record enough information to justify the decisions they make. This does not mean that assessors must record, word for word, the questions put to the candidate and the answers the candidate gives. However, assessors must record enough information about what they asked and how the candidate replied to allow the assessment to be verified.
Questioning witnesses is normally an ongoing part of validating written witness statements. However, questioning witnesses should not just be used for this purpose. Assessors should be able to speak to witnesses and record, in whatever way is suitable, the verbal statements of these witnesses. A record of verbal statement is a form of witness statement and could provide valuable evidence to confirm a candidate’s competence over a period of time.
Assessment
18 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
3.9 Professional discussion
Professional discussion is a structured, planned and in-depth discussion recorded by the assessor. It allows the candidate to present evidence of competence and to demonstrate skills, knowledge and understanding through discussing the evidence and showing how it meets the requirements of the qualification. The assessor should guide the discussion by using open questioning, active listening and knowledge of the standards.
3.10 Witness testimonies
Witness testimonies can be used as evidence of a candidate’s performance. Such testimonies could be made verbally to the assessor or could be written in a short note.
If a witness provides a written statement they should include the following:
the candidate’s name
the date, time and venue of the activity carried out
a description of the activities performed by the candidate
the date of writing the testimony
a description of the witness’ relationship to the candidate
their signature and job title
their contact details (such as telephone number).
It is not appropriate for witness testimonies to contain a list of the skills to which it relates. Witnesses must direct the information in their testimonies to describing what the candidate did. The assessor will then judge whether the candidate’s activities demonstrate competence to the standards. It is not acceptable for candidates to produce written witness testimonies for witnesses to sign, to support a qualification they are working towards.
3.11 Personal statements
This is a candidate’s own account of what they did, backed up by reference to evidence or witnesses. Candidates can also produce logs or diaries, reflective accounts, however, someone who can authenticate them as a true account of what took place must countersign these.
Assessment
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 19
3.12 Performance evidence
Performance evidence provides proof of what a candidate can do. Sometimes, performance evidence can also provide evidence of what a candidate knows. Performance evidence can take the form of the following:
products or outcomes of the candidate’s work (for example, things that the candidate produced or worked on). The evidence presented for assessment may be the actual product or a record of the product
if group work is used as evidence, the candidate’s contribution must be identified clearly. Other products (for example, company policies) may have been reproduced by someone else but relate to the candidate and their competence
proof of the way the candidate carried out their work (that is, the process they went through). An assessor’s observation of a candidate or a witness’ testimony both provides performance evidence and would be suitable for these qualifications.
3.13 Where evidence comes from
Evidence may come from a number of different sources, for example:
performance evidence may come from a candidate carrying out workplace activities
knowledge evidence may come from a candidate carrying out workplace activities or from the candidate answering the assessor’s questions.
3.14 Real work
The qualifications require that all assessment of a candidate’s performance must take place within the workplace, and that observation should be of naturally occurring practice within the candidate’s work role. This will include the demonstration of the application of knowledge.
3.15 Simulation
Simulation is not allowed. However, where access to assessment is jeopardised by this, guidance should be sought from OCR who will decide the issue in conjunction with ProSkills.
Assessment
20 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
3.16 Medium that can be used
Evidence can take many forms, for example, photographs, videos, audio tapes, CD-ROMs and paper-based or digitally formatted documents.
3.17 Amount of evidence needed
It is difficult to give detailed guidance regarding the amount of evidence needed as it depends on the type of evidence collected and the judgement of assessors.
For a candidate to be judged competent in a unit, the evidence presented must satisfy all the assessment requirements and assessment criteria.
The quality and breadth of evidence provided should determine whether an assessor is confident that a candidate is competent or not. Assessors must be convinced that candidates working on their own can work independently to the required standard.
OCR may accept some evidence from candidates who have been assessed in a language other than English, Welsh or Irish as long as there is enough evidence to show that candidates are competent in English, Welsh or Irish to the standard required for competent performance throughout the UK.
3.18 Cumulative assessment record (CAR)
As well as collecting evidence, candidates must record all their assessed evidence in their personal cumulative assessment record (CAR). The CAR is the candidate’s record of what evidence has been accepted as proof of competence and where that evidence can be found. It can also be used to record progress towards, and achievement of units.
Filling in the CAR is an ongoing process involving discussion and agreement between the candidate and their assessor. The candidate should fill in and keep the CAR while working towards their qualification. An assessor may help the candidate complete the CAR if necessary.
Centres can design their own recording documents if they want to. You should talk about any document you want to use with your external verifier before you use them. OCR’s publication Admin guide: Vocational Qualifications (A850) includes information and criteria for designing recording documents.
We have provided other forms and recording documents which assessors and candidates might want to use for these qualifications please see the OCR website www.ocr.org.uk.
Assessment
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 21
3.19 Verification – how it works
Internal verification
It is the centre’s responsibility to appoint an internal verifier/quality assurer to manage the internal verification process. The purpose of internal verification is to make sure and show that assessment is valid and consistent, through monitoring and sampling assessment decisions.
The role of the internal verifier/quality assurer is more fully explained in the Admin guide: Vocational Qualifications (A850).
External verification
OCR will allocate an external verifier who will visit the centre to verify assessments and internal verification.
External verifiers will want to interview candidates, assessors and internal verifiers/quality assurers during their visits. Assessment records and evidence for all candidates must also be available for verifiers to see if they ask to. It is the assessor’s (and not the internal or external verifiers’) responsibility to ‘sign off’ each unit of competence.
Centres should have the following available for each external verification visit:
a list of candidates registered for these qualifications, together with their achievements to date plus certification records
access to evidence (for example, up-to-date portfolios) and CARs
access to OCR on-line claim system (Interchange)
relevant assessors and selected candidates as requested by the external verifier (EV), including those whose certificates have been claimed through Direct Claims Status (DCS)
all portfolios (access to evidence) relating to certificates claimed through DCS
a copy of the external verifier’s last visit report
a sample signature list for all assessors and internal verifiers/quality assurers
details of training and curriculum vitae for new members of the assessment team
all centre records (see Centre records – assessment and verification for more details)
evidence of achieving action points since the last external verifier visit
notes of any action carried out due to particular points mentioned by an external verifier in any correspondence since their last visit
Assessment
22 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
recommendations to the external verifier
if recorded evidence is used, ensure all recordings and appropriate playback equipment is available.
Centre records – assessment and verification
A centre must make sure that assessment and verification records are available for external verification purposes. Assessment and/or internal verification records must record the following minimum information:
candidate’s name and location
the title and level of the qualification they are taking
candidate’s start date on the programme and confirmation of registration with OCR
name of the assessor
name of the internal verifier/quality assurer
date and outcome of the initial assessment of the candidate
dates and details of candidate reviews and feedback sessions
dates of all assessments and their outcomes (that is, the decision whether the candidate has met the requirements or not) cross-referenced to the unit
enough detail of the assessment to justify the decision made
an indication of the use of simulation, if used
dates and outcomes of internal verification
action resulting from internal verification
certification.
Records should show formative assessment decisions (ongoing decision making), summative assessment decisions and feedback to the candidate.
Assessor and Internal Verifier Requirements
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 23
4 Assessor and Internal Verifier/Quality Assurer Requirements
4.1 Assessment Centre Requirements
The Assessment Centre must:
ensure that there are a sufficient number of people either trained or qualified to assess the number of candidates they anticipate to register
ensure that there are a sufficient number of people either trained or qualified to internally
verify for the number of candidates and assessors
put verification systems and internal verifiers/quality assurers in place to ensure that all assessments are valid, reliable, authentic and sufficient and provide quality assured training for those people identified as being responsible for verification
ensure that there is a system of standardisation in place to ensure that all assessments are
consistent and fair
ensure that those undertaking the roles of verification and assessment maintain their skills, knowledge and understanding regarding assessment and verification and the associated qualification.
The occupational expertise of those undertaking the roles of assessment and internal verification is one of the key factors underpinning valid, fair and reliable assessment. The integrity of assessments and verifications is of paramount importance. Centres must ensure that there is sufficient time to conduct effective assessment and internal verification.
4.2 Assessors
All assessors must:
have verifiable and relevant current industry experience and competence in the occupational working area at, or above the level being assessed and evidence the quality of the occupational experience to ensure the credibility of the assessment judgements. Assessors’ experience and competence could be evidenced by:
- Curriculum Vitae and references
- Possession of a relevant health and safety qualification
- Appropriate membership of a relevant professional institution
- Continuing Professional Development (CPD).
Assessor and Internal Verifier Requirements
24 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
only assess in their acknowledged area of professional competence
have appropriate knowledge and understanding of the current National Occupational Standards
actively engage in relevant professional development
meet the required criteria in the qualifications regulators current regulation documentation.
Assessment decisions by assessors who are still working towards certification of their assessor qualification must be supported by someone who has gained these assessor units eg A1. Support for trainee assessors’ decisions should be recorded by the qualified assessor. This can be achieved by counter-signing assessment decisions.
4.3 Internal verifiers/quality assurers
Internal verifiers/quality assurers must:
have verifiable and relevant current industry experience and competence in the occupational working area at, or above the level being assessed and evidence the quality of the occupational experience to ensure the credibility of the assessment judgements. Verifiers’ experience and competence could be evidenced by:
- Curriculum Vitae and references
- Possession of a relevant health and safety qualification
- Appropriate membership of a relevant professional institution
- Continuing Professional Development (CPD).
only verify in their acknowledged area of professional competence
have appropriate knowledge and understanding of the current National Occupational Standards
actively engage in relevant professional development .
meet the required criteria in the qualifications regulators current regulation documentation.
Verification carried out by internal verifiers/quality assurers who are still working towards certification of an appropriate internal quality assurance qualification, must be supported by someone who has gained a recognised internal quality assurance qualification eg V1. Support for trainee IV decisions should be recorded by the qualified IV. This can be achieved by counter-signing verification decisions.
Certification
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 25
5 Certification
Candidates who achieve the full qualification will receive:
a certificate listing the unit achieved with their related credit value, and
a certificate giving the full qualification title
OCR Level 3 NVQ Certificate in Occupational Health and Safety
or
OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice
Candidates achieving one or more units, however, who do not meet the credit requirements for a full certificate will receive a certificate listing the units they have achieved along with their credit value.
5.1 Claiming certificates
Certificates will be issued directly to the centre for successful candidates. In order to ensure that these are automatically issued centres must ensure that the OCR candidate number is always used where a candidate has already achieved one or more units. See the Admin guide: Vocational Qualifications (A850) for full details.
5.2 Replacement certificates
If a replacement certificate is required a request must be made to the OCR Operations Division on 024 76 470033, or in writing to the Coventry office, and an application form with further instructions will be sent. A charge will be made for a replacement certificate.
Qualification structure and units
26 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
6 Qualification structure and units
6.1 Qualification structure
Candidates do not have to achieve units in any particular order and teachers/tutors should tailor learning programmes to meet individual candidate needs. It is recommended that, wherever possible, centres adopt a holistic approach to the delivery of these qualifications and identify opportunities to link the units.
If a candidate is not able to complete the full qualification, their achievements will be recognised through the issue of a unit certificate listing the units achieved.
OCR Level 3 NVQ Certificate in Occupational Health and Safety
(Qualification Accreditation Number 600/0101/X)
To achieve this qualification, candidates must achieve a total of 31 credits made up as follows:
Group 1: Five mandatory units, candidates must achieve 23 credits; all at Level 3
Group 2: At least 8 credits from two optional units; all at Level 3
The following tables contain the groups of mandatory and optional units:
Group 1
OCR Unit No
Unit title Unit Accreditation No (UAN)
Credit value
Level GLH
1 Ensure responsibility for actions to reduce risks to health and safety
T/602/1912 4 3 18
2 Develop procedures to safely control work operations
L/601/6408 4 3 26
3 Monitor procedures to safely control work operations
F/601/9354 5 3 35
4 Promote a culture of health and safety in the workplace
F/601/6633 4 3 18
5 Conduct a health and safety risk assessment of the workplace
H/601/6687 6 3 32
Qualification structure and units
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 27
Group 2
OCR Unit No
Unit title Unit Accreditation No (UAN)
Credit value
Level GLH
6 Investigate and evaluate health and safety incidents and complaints in the workplace
F/601/6664 5 3 26
7 Make sure actions in the workplace aim to protect the environment
J/601/6701 4 3 17
8 Review health and safety procedures in the workplace
M/601/6837 4 3 21
9 Supervise the health, safety and welfare of a learner in the workplace
Y/601/6847 4 3 22
OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice
(Qualification Accreditation Number 600/0006/5)
To achieve this qualification, candidates must achieve a total of 108 credits made up as follows:
Group 1: Ten mandatory units
Group 1
OCR Unit No
Unit title Unit Accreditation No (UAN)
Credit value
Level GLH
1 Promote a positive health and safety culture
J/602/2210 5 5 22
2 Develop and implement the health and safety policy
D/602/2214 14 6 69
3 Develop and implement effective communication systems for health and safety information
J/602/2224 8 4 35
4 Develop and maintain individual and organisational competence in health and safety matters
Y/602/2227 10 5 44
5 Identify, assess and control health and safety risks
J/602/2238 18 5 68
6 Develop and implement proactive monitoring systems for health and safety
L/602/2239 10 5 47
7 Develop and implement reactive monitoring systems for health and safety
J/602/2241 15 5 69
8 Develop and implement health and safety emergency response systems and procedures
R/602/2243 12 5 41
9 Develop and implement health and safety review systems
H/602/2246 8 5 41
10 Maintain knowledge of improvements to influence health and safety practice
M/602/2248 8 5 46
Qualification structure and units
28 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
6.2 Unit format
The format of OCR’s units is detailed below.
A unit title
This is a summary of the content of the unit.
Level
This advises the QCF level on which the unit is accredited.
Credit value
This advises how many credits the candidate will achieve for successful achievement of the unit.
Guided learning hours (glh)
This specifies the amount of time that the average candidate would be expected to take to complete all requirements of the unit.
Unit expiry date
This section specifies the end accreditation date of the unit.
Unit purpose and aim
This section specifies the overall purpose and aim of the unit.
Learning outcomes
These set out what the candidate is expected to know, understand or be able to do as a result of the learning process.
Assessment criteria
These detail the requirements that the candidate will be assessed against in order to evidence the learning outcomes.
Qualification structure and units
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 29
Exemplification
This details the underpinning knowledge, understanding and skills which candidates will need in order to be able to undertake the assessment for the unit and to meet the requirements of the assessment criteria.
Assessment
This section details how the assessment criteria will be assessed.
Evidence requirements
These provide specific detail to amplify the knowledge or understanding required to meet the assessment criteria.
Guidance on assessment and evidence requirements
This provides guidance on how the assessment could be carried out and how the evidence requirements could be met.
National Occupational Standards (NOS) mapping/signposting
This section provides mapping to the relevant National Occupational Standards.
6.3 Units
Units can be downloaded from the OCR website www.ocr.org.uk.
Administration arrangements
30 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
7 Administration arrangements
This section provides an overview of the administration arrangements operating for these qualifications. Please refer to the Admin guide: Vocational Qualifications (A850) for further information.
7.1 Overview of full process
For detailed information on these qualifications centres must refer to OCR’s Admin guide: Vocational Qualifications (A850).
The following flowchart provides a brief summary of how these qualifications are delivered.
Administration flowchart for verification
Apply for centre approval Complete the approval form
Make entries Via Interchange
Schedule OCR Verifier visits Your verifier contacts you: you are entitled to
two free visits per academic year
Assess and standardise Before the verifier visit
Submit claim via Interchange Let your verifier know which candidates are
ready to be verified
Prepare sample Your Verifier will tell you which candidates’ work
will be verified
OCR Verifier visit takes place The Verifier confirms assessment decisions,
provides feedback, advice and guidance
OCR issues certificates OCR publishes electronic results and sends unit
and full award certificates as appropriate
Supporting Documentation
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 31
8 Supporting Documentation
8.1 OCR assessment material
Assessment materials
The OCR assessment materials for these qualifications include record of achievement, evidence record sheet and witness list. These assessment materials are available to download from the OCR website www.ocr.org.uk.
Guidance for Candidates
32 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
9 Guidance For Candidates
9.1 What is the NVQ Occupational Health and Safety suite?
The aim of these qualifications is to recognise the skills and competencies of candidates in the workplace.
These qualifications are about the development and implementation of good practice in health and safety matters in the workplace. Candidates will have a great deal of authority, influence and autonomy and will be required to make decisions within agreed limits and boundaries.
9.2 What do I have to do to achieve these qualifications?
To achieve these qualifications you must achieve the required combination of units from those listed below.
OCR Level 3 NVQ Certificate in Occupational Health and Safety
(Qualification Accreditation Number 600/0101/X)
To achieve this qualification, candidates must achieve a total of 31 credits made up as follows:
Group 1: Five mandatory units, candidates must achieve 23 credits; all at Level 3
Group 2: At least 8 credits from two optional units; all at Level 3
The following tables contain the groups of mandatory and optional units.
Group 1
OCR Unit No
Unit title Unit Accreditation No (UAN)
Credit value
Level
1 Ensure responsibility for actions to reduce risks to health and safety
T/602/1912 4 3
2 Develop procedures to safely control work operations
L/601/6408 4 3
3 Monitor procedures to safely control work operations
F/601/9354 5 3
4 Promote a culture of health and safety in the workplace
F/601/6633 4 3
5 Conduct a health and safety risk assessment of the workplace
H/601/6687 6 3
Guidance for Candidates
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 33
Group 2
OCR Unit No
Unit title Unit Accreditation No (UAN)
Credit value
Level
6 Investigate and evaluate health and safety incidents and complaints in the workplace
F/601/6664 5 3
7 Make sure actions in the workplace aim to protect the environment
J/601/6701 4 3
8 Review health and safety procedures in the workplace
M/601/6837 4 3
9 Supervise the health, safety and welfare of a learner in the workplace
Y/601/6847 4 3
OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice
(Qualification Accreditation Number 600/0006/5)
To achieve this qualification, candidates must achieve a total of 108 credits made up as follows:
Group 1: Ten mandatory units
Group 1
OCR Unit No
Unit title Unit Accreditation No (UAN)
Credit value
Level
1 Promote a positive health and safety culture
J/602/2210 5 5
2 Develop and implement the health and safety policy
D/602/2214 14 6
3 Develop and implement effective communication systems for health and safety information
J/602/2224 8 4
4 Develop and maintain individual and organisational competence in health and safety matters
Y/602/2227 10 5
5 Identify, assess and control health and safety risks
J/602/2238 18 5
6 Develop and implement proactive monitoring systems for health and safety
L/602/2239 10 5
7 Develop and implement reactive monitoring systems for health and safety
J/602/2241 15 5
8 Develop and implement health and safety emergency response systems and procedures
R/602/2243 12 5
9 Develop and implement health and safety review systems
H/602/2246 8 5
10 Maintain knowledge of improvements to influence health and safety practice
M/602/2248 8 5
Guidance for Candidates
34 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
9.3 What if I cannot gain enough credits for a full qualification?
These qualifications are very flexible and allow you to achieve recognition for what you have already achieved even if you do not finish the full qualification. OCR has systems in place which allow you to be awarded a certificate listing the unit (or units) you have achieved even if you are unable to complete the full qualification.
9.4 How do I know that these qualifications are right for me?
These qualifications are designed for candidates wishing to gain an appropriate qualification for the purposes of working in a health and safety role.
These qualifications may also form a progression route to other higher level OCR qualifications or other appropriate higher education qualifications.
9.5 How are the units assessed?
All of the units are internally assessed by centre staff and externally verified by an OCR Assessor.
9.6 Do I need to pass all of the units?
The units that need to be passed in order to achieve a full OCR Level 3 NVQ Certificate in Occupational Health and Safety/OCR Level 5 NVQ Diploma in Occupational Health and Safety Practice are detailed in section 9.2. However, each unit represents a worthwhile achievement in its own right, and certification is also available at unit level.
9.7 How do I keep track of my achievements?
We have designed a Record of Achievement form for you to use to keep track of your achievements. This form is optional (you do not have to use it if you do not want to).
Guidance for Candidates
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 35
9.8 Can my work for these qualifications prepare me for my Functional Skills?
The work that you do for these qualifications may help to prepare you for the functional skills assessment.
OCR wishes you every success in your achievement of these qualifications.
Mapping and Signposting
36 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
10 Mapping and Signposting
10.1 National Occupational Standards (NOS) Mapping
These qualifications provide a key progression route between education and employment (or further study/training leading to employment). It is directly relevant to the needs of employers and relates to National Occupational Standards (NOS) in Health and Safety.
Each unit contains details of the signposting to the NOS.
Further Support and Information
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 37
11 Further Support and Information
11.1 Enquiries
For enquiries relating to any of OCR’s vocational qualifications, please contact the OCR Customer Contact Centre on:
Telephone: 024 76 851509 Fax: 024 76 851633 Email: [email protected]
Alternatively, you could visit OCR’s website at www.ocr.org.uk for further information on OCR qualifications.
11.2 Results enquiries
For information about result enquiries please refer to the OCR website at www.ocr.org.uk
11.3 Customer feedback
We welcome feedback from customers on all aspects of our provision. Comments relating to this documentation should be sent to:
OCR Qualifications Manager NVQ Occupational Health and Safety Qualifications and Curriculum Division OCR Coventry Office Westwood Way Coventry CV4 8JQ
Further Support and Information
38 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
11.4 OCR Training Events
Information on OCR’s training events for centres can be found on the OCR website by going to www.ocr.org.uk, or by contacting:
OCR Training Customer Support Division Progress House Westwood Way Coventry CV4 8JQ
Telephone: 02476 496 398 Fax: 02476 496 399 Email: [email protected]
11.5 OCR Publications
The OCR Publications Service offers support to OCR customers, centres, parents and candidates. It offers a wide range of up-to-date materials for sale which relate to our key qualifications. These materials include specifications, past papers, mark schemes and a range of support materials.
The OCR Publications Catalogue holds the full list of materials currently available to order. To obtain a copy of this and to order publications, please go to http://publications.ocr.org.uk or call our dedicated order line on 0870 770 6622.
Orders can also be emailed to [email protected] or posted to the address on the order form printed in the OCR Publications Catalogue.
OCR Support Materials prepare extra resources to help you deliver our qualifications. These support materials can be ordered from OCR Publications and more information about the materials can be obtained from [email protected].
11.6 Documents related to these qualifications
OCR’s Admin guide: Vocational Qualifications (A850)
Glossary
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 39
12 Glossary
Analyse to examine in detail in order to discover meaning, essential features, etc
Apply to devote oneself with diligence
to bring into operation or use
to put to practical use; utilise; employ
Assess to judge the worth, importance, etc, of; evaluate
Calculate to solve (one or more problems) by a mathematical procedure; compute
Carry out to perform or cause to be implemented
Chart to plot or outline the course of
to make a detailed plan of
to make a chart of
Classify to arrange or order by classes; categorise
Collect to gather together or be gathered together
Communicate to impart (knowledge) or exchange (thoughts, feelings, or ideas) by speech, writing, gestures, etc
Compare to regard or represent as analogous or similar; liken
Compile to make or compose from other materials or sources
Complete to make whole or perfect
to end; finish
Conduct to do or carry out
Contrast to distinguish by comparison of unlike or opposite qualities
Contribute to give (support, money, etc) for a common purpose or fund
to supply (ideas, opinions, etc) as part of a debate or discussion
Define to state precisely the meaning of (words, terms, etc)
Deliver to carry (goods, etc) to a destination, esp. to carry and distribute (goods, mail, etc) to several places
to hand over, transfer, or surrender
to produce or perform something promised or expected
Demonstrate to show, manifest, or prove, esp. by reasoning, evidence, etc
Describe to give an account or representation of in words
Design to work out the structure or form of (something)
Detail to list or relate fully
to include all or most particulars
Develop to come or bring to a later or more advanced or expanded stage; grow or cause to grow gradually
Devise to work out, contrive, or plan (something) in one’s mind
Discuss to have a conversation about; consider by talking over; debate
to treat (a subject) in speech or writing
Estimate to form an approximate idea of (distance, size, cost, etc); calculate roughly; gauge
Glossary
40 OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety
Evaluate to ascertain or set the amount or value of
to judge or assess the worth of; appraise
Examine to look at, inspect, or scrutinise carefully, or in detail; investigate
Explain to make (something) comprehensible, esp. by giving a clear and detailed account of the relevant structure, operation, surrounding circumstances, etc
Explore to examine or investigate, esp. systematically
Generate to produce or bring into being; create
Give to present or deliver voluntarily (something that is one’s own) to the permanent possession of another or others
to impart or communicate
Identify to prove or recognise as being a certain person or thing; determine the identity of
Illustrate to clarify or explain by use of examples, analogy, etc
Implement to carry out; put into action; perform
Interact to act on or in close relation with each other
Interpret to clarify or explain the meaning of; elucidate
Investigate to inquire into (a situation or problem) thoroughly; examine systematically, especially in order to discover the truth
Justify to prove or see to be just or valid; vindicate
to show to be reasonable; warrant or substantiate
Keep to have or retain possession of
Lead to show the way to (an individual or a group) by going with or ahead
to guide or be guided by holding, pulling, etc
to phrase a question to (a witness) that tends to suggest the desired answer
Measure to determine the size, amount, etc, of by measurement
Monitor to observe or record (the activity or performance) of (an engine or other device)
Organise to form (parts or elements of something) into a structured whole; co ordinate
Outline to give the main features or general idea of
Participate to take part, be or become actively involved, or share (in)
Perform to carry out or do (an action)
Plan to have in mind as a purpose
to make a plan of (a building)
Prepare to make ready or suitable in advance for a particular purpose or for some use, event etc
to put together using parts or ingredients; compose or construct
to equip or outfit
Present to show, exhibit
to put forward; submit
to bring or suggest to the mind
Produce to bring (something) into existence; yield
to bring forth (a product) by physical or mental effort; make
Profile to draw, write or make a profile of
Promote to further or encourage the progress or existence of
to raise to a higher rank, status degree etc
Glossary
OCR Level 3 Certificate/Level 5 Diploma in Occupational Health and Safety 41
to urge the adoption of; work for
to encourage the sale of (a product) by advertising or securing financial support
Propose to put forward (a plan, motion, etc) for consideration or action
Provide to put at the disposal of; furnish or supply
Recognise to perceive (a person, creature, or thing) to be the same as or belong to the same class as something previously seen or known; know again
Recommend to advise as the best course or choice; counsel
Research to carry out investigations into (a subject, problem etc)
Review to look at or examine again
to look back upon
Select to choose (someone or something) in preference to another or others
Serve to render or be of service to (a person, cause, etc); help
to distribute or provide
Show to make, be, or become visible or noticeable
to indicate or explain; prove
Suggest to put forward (a plan, idea, etc) for consideration
Summarise to make or be a summary of; express concisely
Understand to know and comprehend the nature or meaning of
Undertake to contract to or commit oneself to (something) or to do (something)
Use to put into service or action; employ for a given purpose