COVER PAGE SUBTITLE

PLACEHOLDER

COMPANY CONFIDENTIAL

NXP USB Type-C Solutions-

Distribution Bronze Certification Training

Ravi S. Shah

Secure Interfaces and Power

June, 2015

USB Type – C Interface

Benefits

Size• Smaller connector designed to fit all form factors

Ease of use• User friendly

• Independent of Plug orientation and cable direction

Future Scalability• Designed to support future upgrades in the spec –

higher speeds

‘Extends’ USB family• Legacy USB devices supported

‘Last connector’• Enables one connector platform

• Supports power, video and data over single connector

USB Type C Ports

Port Type Description

DFP – Downstream Facing Port “USB host” & initial Vbus/VCONN source,

Typical Standard-A host

UFP – Upstream Facing Port “USB device” & initial Vbus sink,

Typical Standard-B device

DRP – Dual Role Port A port that may operate as a DFP or UFP

USB Type-C Configuration Channel

4

CC pins and functionality

• Attach/Detach detection

• Determination Plug orientation

• Initial Port role determination

• USB PD Type C Communication (For PD)• Modification of initial port roles

• Negotiation of USB PD power contracts

• Management of Functional Extensions (For PD)• Structured Vendor Defined Messages (VDM)

5

USB Type C Spec – Power

Priority order for power

1. USB PD

2. USB Type-C Current

3. USB BC1.2

4. USB 2.0, USB3.1

Type Voltage Current

USB2.0 5V 500mA

USB3.1 5V 900 mA

USB BC1.2 5V 1.5A

USB Type-C Current 5V 1.5A, 3A

USB Type-C PD Up to 20V Up to 3A (Cable)

Up to 5A (Elec. Marked Cable)

Up to 5A (Receptacle, Direct, Captive cable)

What is USB-Power Delivery (PD)?

• USB-PD specification extends USB capability to 100W

• Various power configurations possible – fixed, programmable, battery,

fast charging

• Possible to change the power flow (role-swap)

• Various power profiles defined:• Profile # 1 – capable of supplying 5V @ 2A

• Profile # 2 – capable of supplying 5V @ 2A, 12V @ 1.5A

• Profile # 3 – capable of supplying 5V @ 2A, 12V @ 3A

• Profile # 4 – capable of supplying 5V @ 2A, 12V and 20V @ 3A respectively

• Profile # 5 – capable of supplying 5V @ 2A, 12V and 20V at 5A respectively

What is Alternate Mode support?

• Alternate Mode support allows signals other than USB to pass through

the Type-C connector.

• Under Alternate mode, a Type-C DRP can check the capability on the

other end and send DisplayPort data over Type-C.

• Up to 4-lanes of DP signals can be sent through Type-C interface.

• This way video connectors other than DisplayPort (like VGA, HDMI) can

be supported through Type – C protocol converters

COMPANY CONFIDENTIAL

USB Type-C Pinout

USB Type-C Connector – Pinout and Alignment

9

Receptacle (Front View)

Normal Plug Reverse Plug

USB3.0USB3.0 USB2.0

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL 10System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

USB Type-C Receptacle Pins

Pins defined for system or device receptacle

High-Speed UDB 2.0 plug pinout

COMPANY CONFIDENTIAL

Ecosystem Illustration

11

BrightnessContrast

VbusUSB PD

Battery

Charging

Type-C

Type-C

Type-C

Type-C

Type-C

Type-C

Type-C

Type-C

Type-C

Type-C

USB PD

USB PD

USB PD

USB PD

Power

Adaptor

USB PD

Power

Adaptor

NXP offers USB Type-C solutions in

Systems

Cable and dongle adaptors

AC/DC power adaptors

COMPANY CONFIDENTIAL

Ecosystem Illustration (I)

12

BrightnessContrast

Battery

Charging

Type-C

Type-C

Type-C

Type-C

Type-C

Type-C

USB PD

Power

Adaptor

USB PD

Power

Adaptor

NXP offers USB Type-C solutions in

Systems

Cable and dongle adaptors

AC/DC power adaptorsType-C

Type-C

USB PD

USB PD

USB PD

Type-C

USB PD

Type-C

USB PD

Type-C

Network Instrumentation Gateway

Set Top Box USB-KeyStorage Gaming

COMPANY CONFIDENTIAL

Ecosystem Illustration (II)

13

Battery

Charging

Type-C

Type-C

Type-C

Type-C

Type-C

Type-C

USB PD

Power

Adaptor

USB PD

Power

Adaptor

NXP offers USB Type-C solutions in

Systems

Cable and dongle adaptors

AC/DC power adaptorsType-C

Type-C

USB PD

USB PD

USB PD

Type-C

USB PD

USB PD

Type-C

Medical Automation Industrial

Small ApplianceHome Appliance ET Phone Home

BrightnessContrast

Type-C

COMPANY CONFIDENTIAL

Ecosystem Illustration (III)

14

BrightnessContrast

VbusUSB PD

Battery

Charging

Type-C

Type-C Type-C

Type-C

Type-CType-C

USB PD

Type-C

Type-C

USB PD

USB PDType-C

USB PD

Power

Adaptor

Type-C

USB PD

Power

Adaptor

NXP offers USB Type-C solutions in

Systems

Cable and dongle adaptors

AC/DC power adaptors

NXP offers USB Type-C solutions in

Systems

Cable and dongle adaptors

COMPANY CONFIDENTIAL 15

System Solution for USB Type-C Connector

Intelligent

Switch

Audio

CODEC

System

Chipset High

Performance

Switches

Signal

Conditioner

I/F P

rote

cto

rs

USB PD PHY

Load Switches

Please click on the NXP Product

of interest to reviewNXP

Products

Type-C

Pinout

USB

Type-C

VBUS

VCONN

USB2.0

USB3.0

CC Logic

RFU

Authentication

Micro

Controller

COMPANY CONFIDENTIAL 16

USB Type-C Active Cable and Adaptor Solution

(Cont.)

USB

Type-C

VBUS

VCONN

USB2.0

USB3.0

CC Logic

RFU

I/F P

rote

cto

rs

Cable PHY and protocol IC

DC/DC

Cable adaptor

Responder

Legacy interface

(Ex. DP-VGA)

The cable adaptor responder

will need to inform the Alternate

mode support to the system

side.

USB

Type-C

Plug

VBUS

VCONN

USB2.0

USB3.0

CC Logic

RFU

Protocol

Bridge

Type-C

Pinout

Please click on the NXP Product

of interest to reviewNXP

ProductsI/F

Pro

tecto

rs

COMPANY CONFIDENTIAL 17

USB Type-C Full Featured Passive Cable Solution

USB

Type-C

VBUS

VCONN

USB2.0

USB3.0

CC Logic

RFU

Electronic

Cable Marker

USB

Type-C

VBUS

VCONN

USB2.0

USB3.0

CC Logic

RFU

Type-C

Pinout

Please click on the NXP Product

of interest to reviewNXP

ProductsI/F

Pro

tecto

rs

I/F P

rote

cto

rs

COMPANY CONFIDENTIAL 18

AC/DC Adaptor Solution for USB Type-C Connector

USB

Type-C

VBUS

VCONN

USB2.0

USB3.0

CC Logic

RFU

AC/DC

Converter

USB PD PHY

Load Switches

NXP

Solutions

Micro

Controller

Type-C

Pinout

Authentication

Please click on the NXP Product

of interest to review

I/F P

rote

cto

rs

COMPANY CONFIDENTIAL

USB Type-C Switches

COMPANY CONFIDENTIAL

What is a Signal Switch and why NXP?Why is it needed?

– For type-C connector to support “Alternate Mode” or “plug flippable” functions,

either multiplex or de-multiplex switch function will be used, or sometimes

these functions are combined together to become a cross-point switch.

What is a Signal Switch?– Switch provides signal multiplex or de-multiplex function in order to redirect

the transmitted signals to same connection port (multiplex switch) or different

connection ports (de-multiplex switch)

Why NXP?– Signal switch has no signal regeneration function, and it works at transistor

level to redirect the passed signal. The switch architecture design highly

impacts the bypassed signal integrity.

– NXP’s signal switches provide best-in-class high performance features:• High signal bandwidth

• Low return loss

• Low crosstalk

• Low jitter disturbance

20

COMPANY CONFIDENTIAL

Switches Overview for USB Type-C Applications

21

CBTL02043

Mobile & Portable

Applications

CBTL04GP043

Computing

Applications

CBTL08GP053

A0_P B0_P

SEL

C0_P

A0_N B0_N

A1_P B1_P

A1_N B1_N

C0_N

C1_P

C1_N

XSD

Computing & Docking

Applications

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

CBTL02043 10 GHz High Bandwidth Switch 2 differential channel, 2:1 bi-directional mux/demux

Signaling Supported

– PCIe Gen3 @ 8Gbps

Insertion loss

– -0.5dB at 100 MHz

– -1.2dB at 4 GHz

– -3.0dB at 10 GHz

Low Return-Loss -19.4dB at 4GHz

Low crosstalk: -28dB at 4GHz

Low Off-isolation: -23dB at 4GHz

Low intra-pair skew: 5ps typical

Low inter-pair skew: 35ps max

3.3 V supply voltage

DHVQFN20 package

ESD 2kV HBM, 1kV CDM

Two pin outs available for PCB layout optimization

Standby current < 1 uA controlled by XSD pin

22

Applications:

Type-C connector

PCIe Gen 3

DisplayPort V1.2

USB 3.0

SATA Gen 3

A0_P B0_P

SEL

C0_P

A0_N B0_N

A1_P B1_P

A1_N B1_N

C0_N

C1_P

C1_N

XSD

Now in Production

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

CBTL04GP043 - Crossbar Switch for USB

Type-C Connector

The new USB Type-C connector, built

initially on existing USB 3.0 and USB 2.0

technologies, is being developed to help

enable thinner and sleeker product designs.

Key characteristics of the USB Type-C

connector and cable solution include: – New smaller size – similar in size to the

existing USB 2.0 Micro-B

– Usability enhancements – users will no

longer need to be concerned with plug

orientation/cable direction, making it easier

to plug in

– The Type-C connector and cable will

support scalable power charging (USB PD)

23

Now in Production

• Dual 2x2 differential channel cross bar

switch

• Operating voltage range : 2.7 V to 3.5 V

• Bandwidth: 7 GHz (typical) for VIC = 0 V;

8.5 GHz (typical) for VIC = 2.2 V

• Low insertion loss, return loss and

crosstalk

• Back current protection on all I/O pins of

these switches

• XFBGA28 package with 0.5 mm pitch

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

CBTL08GP053 – USB Type-C Combo Switch

24

• Applications in platforms supporting Alternate Modes to

transport multiple high speed signals over USB Type-C

connector

• Supports data rates up to 5.4 Gbps

• Supports several use cases

• USB3

• USB3, DP 1/2/4-lanes

• USB3, PCIe (1-lane)

• High Speed Mux target specs

• Bi-directional usage support (mux or switch)

• -3dB BW: >5 GHz

• Insertion loss: 1.3 dB@ 2.7 GHz

• Isolation: 25 dB @ 2.7 GHz

• Return loss: 18 dB @ 2.7 GHz

• Cross talk: 35dB @ 2.7 GHz

• High speed and Side band Mux support (controlled via I2C)

• Back current protection on control pins

• Side band muxes can handle up to 5V (rail to rail signaling)

• Single 3.3V supply

• Active Current consumption ~500 uA

• ESD 2kV HBM, 500V CDM

• 36-ball BGA, 0.4 mm pitch Sampling March 2015

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

Signal Conditioner USB 3.0 re-driver

COMPANY CONFIDENTIAL

What is a USB signal conditioner and why NXPWhat is a USB signal conditioner?

– Signal conditioner is an active signal regenerator which utilizes equalizer

and amplifier to reshape the bypassed signal in order to remove jitters and

reopen the differential signal eyes for longer channel transmission and

reduce the bit error rate.

Why is it needed?– Type-C connector use case would need to transmit or receive USB3 signals

through connector, Type-C switch and long trace length. The USB3 redriver

can improve the signal eye diagram, extend the link distance and help to

pass compliance test.

Why NXP?– NXP provides complete USB3.0 signal conditioners from single channel,

dual channel to quad channel configurations in different packages.

– NXP’s signal conditioners provide high performance features • Programmable equalizer and amplitude settings

• Ultra low active and standby power consumption

• Small outline packages

26

USB 3.0 Redrivers

• Single and dual-port options

• 5-Gbps bandwidth

DESCRIPTION BANDWIDTH SETTINGS POWER SAVING PART#

USB 3.0

Single Port 5 Gbps

5-state

quinary pins

OS

EQ

DE

53 mW @ U2/U3

20 mW @ No Connect

10 mW @ Sleep mode

PTN36241B

USB 3.0

Dual Port 5 Gbps

binary pins

OS

EQ

DE

66 mW @ U2/U3

26 mW @ No Connect

0.5 mW @ Sleep mode

PTN36242L

USB 3.0

Half Port

(Single Channel)

5 Gbps

adjustable RX

equalization,

TX de-emphasis &

output swing

active: 97 mW (54mA)

deep power saving: 18 µW (10 µA)PTN36221A

USB 3.0

Single Port5 Gbps

adjustable

RXequalization

both channels, TX

de-

emphasis&output

swing

PTN36241G

COMPANY CONFIDENTIAL

USB Power DeliveryController and Protocol Responder

COMPANY CONFIDENTIAL

What is USB Power Delivery and why NXPWhat is USB PD ?

– USB PD stands for USB Power Delivery which is the goal of USB connection to provide

USB data link and also power from host to device or vice versus from device to host. The

maximum power delivery via USB PD 2.0 can be up to 5A and 20V through connector or

3A and 20V through USB cable.

– The USB PD protocol is also used to communicate the characteristics of the peripherals

with system to establish the link operation.

Why is it needed?– USB PD to provide higher power delivery than the legacy USB spec.

– Type-C cable adaptor and full-featured Type-C cable electronic marker to communicate

the product and/or cable capability information via PD protocol signal

– Alternate mode support to transport non-USB data over Type-C

Why NXP?– NXP provides optimized system partitioned products with balanced cost and performance.

NXP’s USB PD products and PD Firmware have robust compatibility and complete

functions for • USB PD 2.0 Physical Layer controller

• USB active cable or cable adaptor controller

• USB Type-C full-featured cable electronic marker

• USB Type-C CC logic controller

29

COMPANY CONFIDENTIAL

USB Type-C PD PHY and CC Logic Controller

30

PTN5150CC Logic

Type-C CC logic,

Legacy USB,

OTG

PTN5100PD PHY

Alternate Mode &

USB Power

Delivery

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

DEVICE CONTROL AND MANAGEMENT

SDA INTB

ID

SCL

ADR/CON_DET

CC2

CC1

CC Level Detection

and Indication

Role (Host/Device/

Dual) Control

Rd

VDD

ID

IM

IH

Rd

VDD

ID

IM

IH

PORT

EXT_SEL_2

VBUS_DET

COMPANY CONFIDENTIAL

PTN5150 CC Logic Controller

31

Sampling July, 2015

CC logic control supports plug detection,

orientation detection, role identification and

charging current detection

Support USB ID(OTG) output

Selectable Dual Role or Device only control

Support VCONN PFET control

Operating current: < 40uA;

Shut down current: 5uA

VDD supply voltage range: 2.7v to 5.5v

Small Thin X2QFN12 package 1.6mm

X1.6mm X0.35mm with 0.4mm pitch

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL 32

PTN5150 System Application

- Support USB OTG, USB3 Connection Flip, USB Type-C

Fast Charging and Vconn Power Enable

USB

Type-C

VBus

Vconn (CC)

USB2.0

USB3.0

CC Logic

SBU

USB3 Switch

ID

I2C

PTN5150CC Control Logic

System

Chipset

I/F P

rote

cto

rCharger Detect

USB Power

Delivery

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

PTN5100 – USB Type-C PD PHY and Protocol IC

33

Application – USB Power Delivery

Flexible to work with NXP or any 3rd party MCU via

SPI or I2C interface

Power control and related functions

VBUS (3.7-25V) for local supply

Baseband PD functions

Type-C Cable/plug detection and indication (Host, Device and

Dual role mode support)

USB PD Baseband PHY - BMC, 4B5B, Preamble, SOP, SOP’,

SOP’’ and EOP generation/reception, CRC generation/check,

GoodCRC response

VCONN Low RON switch (up to 5W max)

I2C or SPI slave interface

Power Supply options – VBUS or VDD/VIO

Package HVQFN20 4mm x 4mm, 0.4 mm pitch

• Paired with NXP LPC11xx MCU

series or embedded system

controller (EC)

• Licensing of the USB-PD

Firmware (Protocol & Policy

Engine) is available upon

request

Samples Now

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

Micro Controllers

COMPANY CONFIDENTIAL

NXP USB Type-C MCUs

What are NXP USB Type-C MCUs?– Cost Effective, Small, Low-Power, Industry Leading Microcontrollers

Why are NXP USB Type-C MCUs needed?– Power negotiation

– Proper timing and response

– Support for different protocols and switching

– Spec compliance

– Authentication

Why NXP?– Broad range of high performance MCU

– In house USB-PD firmware

– Fully compliant total solution, one stop shopping

– BOM reduction capability, due to flexibility to integrate major functions – USB

Type-C and Sensor Hub, or Embedded Controller

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

Use Case, Configuration & Firmware Features

Use case Configuration PD Firmware Features

System – Standalone

Desktop PC, Laptop, Notebook

Tablet, Smartphone

PTN5100 + LPC1115 • PD v2.0 Provider/Consumer role

• Alternate mode support & High Speed

Switch (HS) control

• Load switch control

System – Integration

Sensor Hub (Now)

Embedded Controller (Future)

PTN5100 + LPC54102 • PD v2.0 Provider/Consumer role

• Alternate mode & HS Switch control

• Load switch control

Accessories (USB based)

Cable Adaptor/ Dongle

PTN5100 + LPC11U35 • PD v2.0 Consumer role

• Alternate mode & HS Switch control

• Billboard device support

Power Adaptors

AC-DC

PTN5100 + LPC1115 • PD v2.0 Provider role only

• AC-DC voltage control IO

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

USB Load Switches

COMPANY CONFIDENTIAL

What are the USB Type-C Load Switches and

why NXP?What is the Type-C Load Switch product?

– Advanced unidirectional N-channel power switch designed to automatically isolate a

system from a faulty source or load. It includes under-voltage protection, reverse

current protection, over-temperature protection, programmable over-voltage protection,

and/or programmable current limit.

Why is it needed?Type-C load switches provide protection for 2 main use cases:

– Consumer use-case where the notebook is being charged. The load switches protects

the system from OVP surges from faulty wall adapter or external supply, and reverse

connector plug-in.

– Provider use-case where the notebook is providing power to an external load (such as

On-The-Go). The load switch protects the system from overcurrent, short circuits, and

reverse currents caused by a faulty load or upside-down connector plug-in.

Why NXP?– NXP provides simple to implement, yet robust and affordable solutions in a variety of

packages

47

COMPANY CONFIDENTIAL

USB Type-C Power Paths

OTG 5V

regulator

Power delivery path

Charging (consumer)

Supplying, OTG (provider)

Vbus

NX20P5090 – 20V/5A OVP load switch

NX5P3090 - 3 A current limiting load switch

NX5P2190 – 2 A current limiting load switch

3.0 A / 5.0 V

20 V / 5.0 A

12 V / 3.0 A

5.0 V / 3.0 A

Type

-C C

onnecto

rBattery

charger

/ PMU

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

48

COMPANY CONFIDENTIAL

AC/DC Converter

COMPANY CONFIDENTIAL

What is USB Type-C AC/DC Solution and why

NXP?

What is the USB PD / Type-C AC/DC Solution?– NXP’s high efficient GreenChip QR/DCM Flyback controller TEA1836 in

combination with NXP’s Synchronous Rectifier TEA1892 guarantee

highest possible efficiency combined with very low stand-by power.

Why is it needed?– Multiple output voltages as defined in the USB-PD standard provide a

challenge to meet energy regulations like Energy star, the US Department

of Energy (DoE) regulation and the European Code of Conduct (CoC).

NXP’s GreenChip solutions help to meet those requirements.

Why NXP?– NXP has a proven track record on high efficiency, low-power standby

solutions in Power Supplies and is once more leading the industry with the

current offering of the TEA1836 & TEA1892.

41

COMPANY CONFIDENTIAL

Base for USB-PD Gen 1

42

“Cool Cube” Platform

TEA1836

TEA1892

Discrete

TL431 Based

Sub System

USB PD

Interface

Opto 1

Opto 2

USB

Type-C

Plug

VBus

CC1

CC2

Gnd

e.g. NXP

PTN5100 &

LPC11E35

TL431, TEA1836, TEA1892, & LPC11E35 Now in Production

LPC11E35 is Sampling Now. USB PD PTN5100 is Sampling Now

System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

Authentication

COMPANY CONFIDENTIAL

What is the USB Type-C Authentication Solution

and why NXP?

What is the Type-C Authentication Solution?– Tamper resistant highly secure authentication solutions to verify that Type-c

peripherals , cables etc. really belong to specific OEM, enabling safe solutions

and prevent counterfeiting.

Why is it needed?– Enables licensing revenue protection (anti counterfeiting / anti cloning)

– Guarantees peripheral’s safety

– Brand and IP protection.

– Enables new use cases (DRM protection, fast & safe charge)

Why NXP?– NXP is the market leader in Secure Identification IC solutions providing

strongest levels of market-proven and certified security, common-criteria

certified design environment, production facilities and secure

personalization/key insertion per die.

44

COMPANY CONFIDENTIAL

Dedicated tamper resistant security hardware

active shield, encrypted buses and memory,

SPA/DPA protection, True Random Number

generation and security sensors

Cryptographic engines

support latest asymmetric and symmetric algorithms

Tamper resistant secure keys storage for

certificates and user code and data

Low foot-print, low power consumption with multiple

interface options. One-Wire, I2C (up to 400 Kbps),

Contactless Interfaces.

Host side reference code available

Key Features of our Anti-Counterfeit Solution

Please contact NXP Sales Manager for more product details

60System

Solution

AC/DC

Adaptor

Type-C

Cable

Active

cable &

adaptor

COMPANY CONFIDENTIAL

Interface Protectors

COMPANY CONFIDENTIAL

What is USB Type-C Interface Protection

Solution and why NXP?

What is the Type-C Interface Protection Solution? – NXP offers ESD protection and Common Mode Filters with integrated

ESD protection for the new USB Type-C connector.

Why is it needed? – ESD protection is required to achieve system-level ESD robustness,

since USB is an external interface. Common Mode Filters are needed to

avoid interference between SuperSpeed USB and the overlapping

GSM/LTE/WiFi frequencies, which are needed for wireless connectivity of

portable devices.

Why NXP? – NXP offers ESD protection, which offer a unique combination of

supporting RF signal integrity as well as true system-level ESD. NXP’s

Common Mode Filters offer an extremly wide-band Common Mode

suppression to cover strong rejection of all critical noise frequencies.

COMPANY CONFIDENTIAL

USB Type-C Product Summary

COMPANY CONFIDENTIAL

USB Type-C Product Status OverviewPart Number SWITCHES Status

CBTL02043 Two differential channel 2:1 Mux-Demux switch Production

CBTL04GP043 Dual channel 2x2 crosspoint switch Production

CBTL08GP053 USB Type-C High performance Crossbar Switch Sampling - Now

Part Number USB REDRIVERS Status

PTN36221A Single channel USB3 Redriver Production

PTN36241B Dual channel USB3 Redriver Production

PTN36241G Dual channel USB3 Redriver, smaller package Sampling - Now

PTN36242L Dual port (four channel) USB3 Redriver Production

Part Number USB PD-PHY and CC-LOGIC CONTROLLERS Status

PTN5100 Type-C PD PHY and Protocol IC Sampling – Now

PTN5150 Type-C CC Logic IC Sampling – July’15

Part Number USB LOAD SWITCHES Status

NX5P2090 2A load switch with OCP / OVP / OTP Production

NX20P5090 5A programmable OVP power switch Sampling – Now

NX5P3090 3A adjustable current limit power switch Sampling – Apr’15

16

COMPANY CONFIDENTIAL

USB Type-C Product Status Overview (continued)

Part Number MICROCONTROLLERS Status

LPC1114 Low cost, low power microcontroller Production

LPC11E35 Low cost, low power microcontroller with integrated EEPROM Sampling – Now

LPC82x LPC800 microcontroller family with power efficiency Production

LPC54101/54102 Lowest power standalone microcontrollers Production

LPC5411x Microcontrollers with integrated audio and USB, single/dual core Sampling – Now

Part Number AC/DC CONVERTERS Status

TEA1836 / TEA1892 45W wall plug AC/DC converters Production

TEA1936 / TEA1992 Gen II AC/DC converters Sampling – Aug’15

Part Number AUTHENTICATION Status

A7101 Tamper resistant, highly secure authentication solution for Type-C Production

A1006 Tamper resistant, highly secure authentication solution for Type-C Sampling – Now

Part Number INTERFACE PROTECTION AND FILTERING Status

PUSB3FR4 4-line protection device with ultra-low clamping, 0.29 pF Production

PUSB3FR6 6-line protection device with ultra-low clamping Production

PUSB3AB6 6-line protection device with ultra-low clamping Production

PCMFxUSB3S Common mode filter and ESD protection for USB3.1 Sampling – Now

17

COMPANY CONFIDENTIAL

Vision – Seamless Connectivity of Data, Video,

Power and Security Over Single ConnectorHigh Speed Signal Transmission•Signal transmission at ultra high speed supports growing data and video content

•USB has good potential to lead among the technologies and become the majority / standard connector.

Multi- Function USB Connector•Smaller neat form factor design drives the connector to carry multiple signals for data and video

•Data, video and power over a single connector is becoming a requirement

Power Delivery•Proprietary charging methods enable faster charging

•USB PD extends beyond USB BC to allow up to 100W charging, power support and role swap for system power optimization

•USB PD is specified to support USB connectors

Security/Authentication• Authentication can be used to verify that peripherals really belong to that specific OEM to enable secure connections, prevent counterfeiting and for safety concerns (e.g. Battery charging)

51

Smaller form factor allowing

convergence of computing/mobile

storage, gateway, Instrumentation,

gaming, Network ect……..

New USB Type-C Connector - Tiny,

Robust, Flippable, High Speed and

Default Power Delivery

COMPANY CONFIDENTIAL

June 11, 2015Business Line Interface Products - Product Line CWG

52