www.machineryhouse.co.nzBUY ONLINEOVER 3,500 PRODUCTS

Prices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.

ONLINE O

R INSTORE

End OF inancialFDON’T MISS OUT! SALE ENDS MARCH 31ST

Y RA

EVERYTHING

IS ON SALE

ONLINE O

R INSTORE

E

PROMO CODE

Note: Discount vouchers are valid for online purchases only

Use promo code ONLINE OR INSTOREto receive these special offers

Valid until 31-03-14

EOFYS14

GAIN ACCESS TO:

√ ONLINE PROMOS

√ EXCLUSIVE OFFERS

√ TRACK your ORDERs

√ Paperless Warranty

√ NEWSLETTERS

√ LATEST RELEASES

√ COMPETITIONS

+

machineryhouse.co.NZ/SIGNUP$70 FREEDISCOUNT VOUCHERS$70 FREEDISCOUNT VOUCHERS$70 FREEDISCOUNT VOUCHERS

• 10mm thick high impact polymer clip together tiles• Tile sizes: 305 x 305 x 10mm

Garage Flooring System

TYPE COLOUR QTY

Tile Black 22 $68 + gst (M806)

Tile White 22 $68 + gst (M807)

Tile Red 22 $68 + gst (M808)

Tile Blue 22 $68 + gst (M809)

Tile Yellow 22 $68 + gst (M810)

Edge Black 10 $18 + gst (M813)

Edge Black 10 $18 + gst (M814)

Corner Black 4 $11 + gst (M815)

22 TILESPER PACK

APPROX 2M2

HS120 Table Saw

Digital Caliper

BS-7L Metal Cutting Band SawAL-50GB Bench Lathe

BSS-5075 Bowl Sanding System

EDBD-13 Drill Sharpener TEC-1G Auto Darken Welding Helmet

XMP5000 TIG-MMA-Plasma Multi-Function Inverter Welder

RSS-4WS Industrial Racking Steel Shelving

RC-290 Roller Conveyor

2500kg Ratchet Tie Down Strap

• Ø315mm TCT blade• 550 x 800 work table • Tilt arbor 45º • 3hp, 240V motor

• 150mm / 6”• Metric, inch & fraction• 4-way measuring• Includes LR44 battery

• 305 x 178mm capacity• Mitre cuts to 45º• Built-in coolant system• 1hp, 240V motor

• 230 x 500mm capacity• 20mm spindle bore• Induction hardened “V” beds• 0.75hp, 240V motor

• 50mm & 75mm sanding heads• Heavy duty ball bearing head• Tilting head with lock• 105 piece

• 3-13mm or 1/8”-1/2”• Capable of split point sharpening• Diamond wheel• 80W, 240V motor

• 9-13 adjustable shade• Darkens 1/16,000 sec• Viewing area 98 x 44mm• UV & IR radiation safe

• 9-13 adjustable shade• Darkens 1/16,000 sec• Viewing area 98 x 44mm• UV & IR radiation safe

• 1955 x 610 x 1830mm• 364kg capacity per shelf• Adjustable shelves• Interlock design, no tools required

• 290 x 3000mm• 48.3mm rollers• Frames are powder coated• Rollers are ø48.3mm

with commercial bearings

• 9 Metre x 50mm• Complete with straps,

hooks and keepers• Complete to AS/NZS 4380.2001

$420.00$380+ gst (W443)

$34.00$28 + gst (M738)

$76.00$68 + gst

(W305)

$106.00$95 + gst

(D070)

$92.00$86 + gst

(W009)

$310.00$290 + gst

(S014)

$336.00$280+ gst (L812)

NEWRELEASE 5x for

$86.95 + gst

LARGE CLEAR

DISPLAY SCREEN

GRINDING FUNCTION

INDUSTRIAL

WOW

SAVE

SUPERDEAL

CHOICE

(H284)

$1,394.00$1,190 + gst

(W1124C)

$1,220.00$1,190

+ gst (L158)

$1,190.00$1,090

+ gst (B006)

$290.00$260

+ gst (L261)

$98.00$88

+ gst (L816)

$98.00$88

+ gst (L814)

OPTIONAL STAND

OPTIONAL STANDS505-800mmAdj. height

715-1050mmAdj. height

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

Prices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.

www.machineryhouse.co.nzORDER NOWUse promo code ONLINE OR INSTORE!

to receive these special offersValid until 31-03-14

EOFYS14

• 14-24mm • HSS• 19mm shank size• 25mm depth of cut

HF-35 1.1kW12-35mm manual

HF-30A 1.1kW12-30mm auto, 35mm manual

SPD-25APedestal Model

SBD-25ABench Model

HF-750 1.8kW12-75mm D109

• 20mm drill capacity• 2MT, 16 spindle speeds• Swivel & tilt table• 1hp, 240V motor• Includes light

Drilling Machines• 31.5mm drilling cap.• 3MT spindle taper• 105-2900rpm speeds• 350 x 500mm work table• 0.9kW / 1.2hp, 415 motor• Includes drill chuck & arbor

• Dovetail column• 2 speed gearbox• Head tilts ±45°• 350W 240V motor• Travels: (X) 225mm (Y) 100mm (Z) 190mm

• 5MT spindle taper• 50mm drilling capacity• M36 threading capacity• 1250mm spindle to base• 620 x 500 x 500mm box table• 16 spindle speeds• 3.7kW / 5hp, 415V motor• Includes: coolant pump,

work light & toolbox, heavy duty tee-slotted table & safety chuck guard

• 1Dovetail vertical slide• 3MT spindle taper• 550 x 160mm table size• Spindle lock for quill• (X) 400mm (Y) 150mm (Z) 350mm• 0.75hp 240V motor• Includes: Drill chuck

& 3MT arbor

• 3MT spindle, 12 speeds• (X) 540mm, (Y) 190mm, (Z) 410mm• 820 x 240mm work table• 2hp, 240V motor• Includes drill chuck, Tungsten tip

face cutter & tilting vice

• Drills to top-dead-centre without clamps or jigs• Finds top-dead-centre every time when hole sawing• Angled work• Hole sawing without using dunnage• Large flat area on the bottom surface

for better clamping

GHD-22 Geared Head Drill

HM-10 SIEG X2 Mini Mill Drill

Z3050-16 Radial Arm DrillSIEG X3 Mill Drill

HM-32 Mill Drill

VAZEY Drill Press Table

• 2 x 1 litre plastic bottles• Flex hose nozzle• Flow control valve• 2 x support brackets

• Casting iron body

127mm

100mm

152mm 105mm114 x 102mm travel

150mm203 x 152mm travel

Standard Drill Press Vices Compound Drill Vices CB-2 Gravity Feed Coolant SystemRecommended Accessories

HF-35 / HF-30A / HF-750Magnetic Drilling Machines• Manual feed type (D950, D9507)• Automatic feed type (D9505)• 50mm maximum thickness• 240V motor• Includes: coolant tank kit & safety chain• 3MT spindle or 19mm broach holder (D9507)

FREE 6 PIECE HSS Broach Drill Set

when you purchase a magnetic drilling machine

• 31.5mm drill capacity• 3MT, 12 spindle speeds• Swivel & tilt table• 1.5hp, 240V motor• T slotted work table

PD-26 Pedestal DrillSBD-20B Bench Drill• 16mm drill capacity• 2MT, 16 spindle speeds• Swivel & tilt table• 1hp, 240V motor

$910.00$890 + gst

(D950)

$5,650.00$5,300 + gst

(M160D)

$4,650.00$4,300 + gst

(M126D)

$4,650.00$4,300 + gst

(T606)

$1,994.00$1,750

+ gst (W1111)

$1,394.00$1,190

+ gst (W1125)

$1,294.00$1,140

+ gst (W1133)

$1,990.00$1,760 + gst

(S682)

$9,800.00$9,600 + gst

(M607D)

$748.00$650 + gst

(W1101)

$334.00$310 + gst

(D138)

$30.00$27 + gst

(V125)

$24.00$21 + gst

(V124)

$84.00$75 + gst

(V120)

$140.00$126 + gst

(V122)

$30.00$27 + gst

(P220)

$36.00$32 + gst

(V126)

$404.00$370 + gst

(D144)

$830.00$780 + gst

(D152)

$890.00$850 + gst

(M150)

$450.00$410 + gst

(D147)

Work Table

Rotates 360º

BM-40V Turret Milling Machine• 3-Axis digital readout • 1370 x 254mm worktable• NT30 spindle • Variable speed 70-3500rpm• X-Axis power feed• (X) 860mm (Y) 360mm (Z) 425mm• 3hp 415V motor

• 3 Axis digital readout system• Tilting head ±90º left to right• NT30 vertical spindle• (X) 600mm (Y) 200mm (Z) 340mm• 1.5kW/2hp, 240V motor

• 3 Axis digital readout system• Dovetail column• Geared head drive• Head tilts ±90°• (X) 540mm (Y) 185mm

(Z) 410mm• 2hp 240V motor

• Ø51 x 2mm steel tube capacity• Ø1-1/4” x 1/8” pipe capacity• Stores up to 50 programs• 1.1kW 240V motor• Includes 1/2, 3/4, 1, 1-1/4”

pipe formers

• 180 Amps• 230V / 1 Phase• 40 - 180 Amps• Includes: MIG torch

& Argon regulator

• 200 Amps • 230V / 1 Phase• 200 Amps• Includes: TIG torch,

Arc leads & Argon regulator

• 14mm cutting capacity - steel• 230V / 1 Phase• 10 - 50 Amps• Thermal overload

protection

• 250 Amps• 230V / 1 Phase• 250 Amps MIG-MMA• Includes: MIG torch, Arc &

Earth leads & Argon regulator

HM-50 Turret Milling MachineHM-48 Mill Drill

TB-60 Electric Pipe & Tube Bender XM180 PRO Inverter MIG Welder

PROTIG 200 AC/DC Inverter TIG/ARC Welder

SC50C Plasma CutterXM250PRO Inverter Multi-Function Welder MIG-MMA

RR-24 Section & Tube Rolling Machine

BM-70VE Turret Milling Machine• 3-Axis digital readout system • 1500 x 305mm work table• NT40 spindle taper• Inverter control variable speed

system (70-4200rpm)• X & Y-Axis inverter power-feed• (X) 1050mm (Y) 420mm

(Z) 500mm

valued

at $198

$80.00$60 + gst

(D199)

NEWRELEASE

BELT DRIVE

V-BELT DRIVE

• 16-76mm tube ring rolling machine• Bends think wall mild steel/stainless

steel, round, square & rectangular tube into circular or radius curves

• 9 round tube dies: 16, 19, 22, 25, 32, 38, 51, 63, 76mm

• 8 Square tube dies: 16, 19, 22, 25, 30, 38, 40, 50mm

• 1.1kw 240V motor

WOWSAVE

WOW

CHOICE

SAVE

WATCH THEVIDEO ONLINE

www.machineryhouse.co.nz/D199

$2,060.00$1,890 + gst

(D170)

$1,690.00$1,590 + gst

(M121)

$1,600.00$1,440

+ gst (D9505)

$1,690.00$1,521

+ gst (D9507)

$2,090.00$1,890

+ gst (M153)

$16,400.00$15,990+ gst (D166)

$19,990.00$19,500+ gst (M630D)

$310.00$270

+ gst (M135A)

$406.00$370

+ gst (M154A)

OPTIONAL STAND

OPTIONAL STAND

210º MAXIMUM

BENDING ANGLE

230V

230V 230V 230V

$1,394.00$1,220

+ gst (W1123)

• 200 Amps• 230V• 10 - 200 Amps• Includes: TIG torch,

Arc leads & Argon regulator

XTP200PRO DC TIG & ARC Inverter Welder

230V

$494.00$420 + gst

(W1119)

• 170 Amps • 230V• 10 - 200 Amps• Includes: TIG torch,

Arc leads & Argon regulator

XI170ACR DC TIG & ARC Inverter Welder

230V

2.

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31STPrices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.

SIGN UP FORMATES RATESMATES RATES

GAIN ACCESS TO:√ ONLINE PROMOS

√ Paperless Warranty√ NEWSLETTERS

√ LATEST RELEASES√ COMPETITIONSat machineryhouse.co.nz/SIGNUP

√ EXCLUSIVE OFFERS√ TRACK YOUR ORDERS

• 30 - 60 bead size

FREE25kg GarnetMedium Beads

S296

• Medium 30 - 60 bead size

FREE3 x Bags of Garnet

S296

• 30 Tonne• 155 ram stroke• Hydraulic & pneumatic• Adjustable ram position• Complete with vee blocks

• 50 Tonne• 200 ram stroke• Motorised / Hydraulic• Adjustable ram position• Complete with vee blocks

HPM-30 Heavy Duty WorkshopHydraulic - Pneumatic Press

HPM-50 Industrial Hydraulic Press

$1,098.00$1,030

+ gst (P130M)

$1,460.00$1,314

+ gst (G1975)

$1,370.00$1,270

+ gst (S302)

$3,600.00$3,450

+ gst (P131M)

1 Tonne x 3M$104.00$88 + gst

(C152)

1 Tonne x 6M$138.00$120 + gst

(C153)

2 Tonne x 3M$162.00$140 + gst

(C154)

$64.00$57 + gst

(P031)

$44.00$39 + gst

(P030)

$260.00$230 + gst

(B043)

$200.00$178 + gst

(P066)

$392.00$310 + gst

(P064)

$220.00$218 + gst

(T055)

$580.00$540 + gst

(S225A)

$570.00$520 + gst

(S226)

$280.00$250 + gst

(S227A)

PDS-2B Bush Driver Set

PDS-3BS Bearing Race & Seal Driver Set

• Driver handle length: 115 & 140 & 160mm• Size: 10-12, 12-14, 14-16, 15-17, 16-18,

18-20, 20-22, 22-24, 25-27, 28-30, 30-34, 32-36, 35-40, 38-42mm

• Discs sizes 39.5, 44.5, 50, 59, 63, 65, 72, 76, 81mm • 1 x Extension

• Manufactured from aluminium

Recommended Accessories

UB-100 Bar BenderCOLD BENDINGFlat: 100 x 5mmSquare: 16 x 16mmRound: Ø18mm diameter

TM-U3 Universal D BIT Grinder• 180W 240V motor • Spindle speed 3600rpm• Grinding wheel size 100 x 50 x 20mm• Includes: End mill, drill & lathe grinding attachments, diamond

wheel dresser, wheel flange, aligning finger & 5C collets

Chain Blocks• Safety catch on swivel hook• High resistance T(80)

load chain• Double safety brake pawls• Ball bearing load wheel

MPB-2 Hydraulic Pipe Bender• Includes 6 pipe formers to suit: 1/2",

3/4", 1", 1-1/4", 1-1/2", 2" water pipe• Manual 12 tonne hydraulic jack

• 6 cast steel water pipe formers: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2” water pipe

• 2 stage 12 tonne pump

MPB-2SH Pipe Bender 1/2 - 2" TBRS-25 Tube Bender• Includes 8 formers• 3/4” & 1” square• 3/8” 1,2”, 9/16”, 5/8”, 3/4”, 7/8” round

Girder Trolleys• Fully adjustable to suit different beam widths• Suit I Beams and universal beams• Ball bearing wheels

Platform Trolleys• 2 fixed & 2 swivel wheels• Heavy duty 152mm solid wheels• Removable handle for easy storage

PSC-3T Plastic Service Cart• Ø127mm wheels (2 swivel & 2 fixed wheels)• 3 trays (790 x 440 x 70mm)• 250kg total load rating

approx 83kg per tray• Includes storage tray handle that attaches

to either side of cart

• 1.2 mild steel capacity• Shrinking dies• Stretching dies

SHST-1.2 Shrinker Stretcher Machine

• 1.2mm mild steel capacity• 500mm throat• 875-1350 Blows/min• Includes 25, 50, 76mm radius anvils• Foot pedal operation• 4CFM air consumption

PPH-51Pneumatic Planishing Hammer

• 1.2mm mild steel capacity• 710mm throat• Includes 50, 76, 101, 152, 203,

254mm radius dies & 1 x Flat die

EWM-71English Wheeling Machine

$42.00$37 + gst

(M805)

$196.00$170 + gst

(S334)

RFM-900 Rubber Mat• 910 x 910mm (10mm thick)• Ideal for the workshop• Clips together for desired

size area needed

$52.00$44 + gst

(M800)

RFM-1500 Rubber Mat• 1505 x 905mm (8mm thick)• Ideal for the workshop or ute• Tapered edge

$220.00$208 + gst

(A353)

TCS-450 SwivelTruck Crane• 450kg load capacity• 360º working angle• Safety hook• Can be fitted to the

back of a Ute or Truck

SB-420 Sandblasting Cabinet

$90.00$80 + gst

(A341)

ESS-450 Engine Stand• 450kg load capacity• Steel frame construction• 4 castor wheels with the

front two swiveling

• Heavy-duty steel cabinet• Left, right & top access doors• 1200 x 600 x 340-570mm blast area• Includes vacuum system, light, tempered

glass screen, gloves gun & ceramic nozzle

$320.00$290 + gst

(S289)

SB-200 Sandblasting CabinetSBP-215 Sandblasting Hopper• Heavy-duty steel cabinet• 835 x 510 x 360-550mm blast area• Includes light, tempered glass screen,

gloves gun & ceramic nozzle

• Portable hopper on wheels• 19 litre hopper capacity• Industrial blasting gun & hose• Includes 1/16” & 1/8” air jet• 1/16” air jet requires 6cfm• 1/8” air jet requires 25cfm

PACKAGE DEAL PRICEONLYIWB-40 Industrial Work Bench PackageWork Bench ....................... (A420) 1800 x 750 x 900mm

Backing Panel ................... (A426) 1733 x 205 x 825mm

4 x Single Prong Hook ..... (A440) 4 x Double Prong Hook ... (A442) 1 x Triple Prong Hook ...... (A444) 1 x Spanner Holder ........... (A446) 1 x Screw Driver Holder .. (A448)

Plastic Buckets • 8 x (110 x 105 x 50mm) (A430)• 8 x (140 x 105 x 75mm) (A432)• 6 x (220 x 140 x 125mm) (A434)

(K030)

SAVE$222.80 RRP

$720 +GST

Includes ColletsGT-1T1 Tonne60-195mm beam width$92.00$78 + gst

(C183)

RST-500H1257 x 761mm500kg Capacity$280.00$260 + gst

(T676)

$180.00$168 + gst

(T748)

RST-300H952 x 608mm300kg Capacity$184.00$180 + gst

(T674)

GT-2T2 Tonne80-200mm beam width$128.00$110 + gst

(C184)

WOW

WOW

CHOICE

SUPERDEAL

SUPERDEAL

Stretcher

in Action

NEWRELEASE

SLIDINGCYLINDER

RAM

SAVE

SAVE

RESTORATION

ANTI-FATIGUE

3.

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

Prices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.

www.machineryhouse.co.nzORDER NOWUse promo code ONLINE OR INSTORE!

To receive these special offersValid until 31-03-14

EOFYS14

HN-220 Hydraulic Sheet Metal Notcher• 200 x 200 x 4mm mild steel capacity• 200 x 200 x 2mm stainless steel capacity• 2.2kW / 3hp 415V motor• Heavy constructed

cast iron working table

K-Type Milling Vices

SIZE OPEN 100mm 62mm $144 (V104)

127mm 80mm $198 (V105)

152mm 112mm $225 (V106)

203mm 146mm $387 (V108)

TABLE SIZE 140 x 300mm $189 (M207)

155 x 470mm $198 (M198)

Compound Tables

(M198)

(M207)

Precision Anglock Machine Vices

SIZE OPEN 100mm 103mm $261 (V304)

127mm 110mm $279 (V305)

152mm 142mm $297 (V306)

203mm 197mm $720 (V307)

SIZE (L x W x H) 250 x 125 x 48mm $365 (C300)

300 x 150 x 48mm $468 (C302)

450 x 150 x 53mm $621 (C306)

450 x 200 x 53mm $747 (C308)

Magnetic Chucks

ACCESSORIES

ACCESSORIES

ACCESSORIES

ACCESSORIES

ACCESSORIESACCESSORIES • Cam-operated On/Off handle

CENTRE HEIGHT 100mm $486 (D001)

128mm $648 (D002)

Dividing Heads

CENTRE HEIGHT 128mm $513 (D0021)

BS-1A Dividing Head

DIAMETER 200mm $954 (R026)

250mm $1,152 (R027)

320mm $1,242 (R028)

• Tilting range 0-90º horizontal to vertical

• 90-1 ratio

Tilting Rotary Tables

TYPEMetric 4-12mm $73 (M333)

Imperial 3/16-1/2” $73 (M335)

TYPEMetric 6-20mm $73 (M330)

Imperial 1/4-3/4” $73 (M332)

CHUCK SIZE152mm $988 (R002)

203mm $1,251 (R004)

Super Indexing Head

Clamp Kits - 58 Piece

Imperial1/2" Slot 3/8"UNC Stud $102 (C090)

5/8" Slot 1/2"UNC Stud $102 (C091)

3/4" Slot 5/8"UNC Stud $144 (C092)

5/8" Slot 1/2" UNC Stud $122 (C094)

Metric10mm Slot M8x1.25 Stud $135 (C095)

12mm Slot M10x1.5 Stud $108 (C0951)

14mm Slot M12x1.75 Stud $122 (C096)

16mm Slot M12x1.75 Stud $122 (C096A)

Studs Table Slot M6x1.0mm 8mm $23 (C0954)

M8x1.25mm 10mm $23 (C0948)

Mini Clamp Kits10 Piece

1/2" UNC Size $9.00 (N084)

M10 $9.00 (N085)

M12 $9.00 (N086)

M16 $10.80 (N088)

Flanged Nuts• Supplied in pack of 2

• Ideal for machining, layout & inspection

5/8" Slot 1/2" UNC $10.80 (C084)

10mm Slot M8 $10.80 (C085)

12mm Slot M10 $10.80 (C085A)

14mm Slot M12 $12.60 (C086)

16mm Slot M12 $12.60 (C087)

18mm Slot M16 $12.60 (C088)

Clamp Kit Tee Nuts• Supplied in pack of 2

112 x 88 x 75mm $61 (M242)

150 x 125 x 112mm $79 (M243)

200 x 150 x 125mm $122 (M244)

(M244)

Size9.52 x 76mm $16.20 (M692)

Centre & Edge Finder• Precision ground • Used for quickly locating work

edges, grooves, shoulders and centre points

• Shank diameter 9.52mm (3/8")• 76mm long• Tip Ø5mm

Precision Ground Open End Angle Plate

Slot Drill & End Mill Sets - HSS10 Piece12 Piece

RT-3 Rotary Table• Gear ratio 36-1• Hand wheel graduated

in 10min divisions• Hand wheel can be set to zero• Horizontal or Vertical operation• 75mm

Ø75mm $99 (R001)

Boring Head Kits

Ø50mm $162 (M182)

Ø75mm $234 (M183)

• 1-1/2” x 18TPI threaded body to mount optional arbors

• Shanks are sold separately

• 1250 x 2mm capacity• Extended fingers allows

bending of pans or boxes to a depth of 230mm

• Ground segmented fingers can be repositioned to suit many applications

• Includes digital angle readout & rear manual backgauge

$3,700.00$3,500+ gst (S262)

$5,800.00$5,500+ gst (S232)

• 1320 x 1.2mm capacity• 700mm backgauge with

fine adjustment• Cast iron construction• Squaring guides• Front sheet supports

SG-41 Manual Treadle Guillotine

$1,900.00$1,810+ gst (S602)

PB-135B Hydraulic NC Pressbrake• E200 Estun Controller 2-Axis with ballscrew backgauge• 135T x 3200mm • 415mm throat depth• 10hp 415V motor • Micro adjustable back stops• Sliding front sheet support arms on linear guideways• Individually adjustable R-Axis backgauge• Includes safety light curtain guarding

$41,990.00$39,990+ gst (S906CG)

HG-1040B Hydraulic Guillotine• 3100 x 4mm cutting capacity• Motorised backgauge with digital readout• Shadow line lighting-alignment device• Hydraulic material plate clamping• Plate support tables with transfer balls• Squaring arm incorporating flip over stops• 7.5kW / 10hp, 415V motor

$17,950.00$16,990+ gst (S929)

• 2470 x 2mm capacity• Manual clamping• Hydraulic bend, 3hp 415V motor• Protractor angle control for repeatability• Quality Italian Brevini hydraulics• Fabricated steel construction

KPM-82H Hydraulic Panbrake

$14,500.00$12,500+ gst (S566)

PB-422A - Manual Panbrake • 2500 x 6mm capacity• Heavy duty steel fabricated construction• Easy to use single angle programmable controller

incorporating digital readout 0-130º• Rapid radius adjustment• Hydraulic clamping• 5.5kW / 7.5hp 415 motor

$20,900.00$20,200 + gst (S586)

PB-860A Hydraulic NC Panbrake

• 4000 x 8mm capacity• 1-Axis Ezy-Set NC-89 Go-To Controller• Hardened ballscrew backgauge with 1000mm travel• 4 edge quality 6CrW2Si blades suitable for stainless steel• Pneumatic material sheet supports• Rapid blade gap adjustment• 7.5kW / 10hp, 415V motor

$40,500.00$38,500 + gst (S962S)

HG-4008VR Hydraulic NC Guillotine PB-170B Hydraulic NC Pressbrake• 176T x 4000mm capacity• Ezy-Set NC-89 Go-To controller “X” & “Y” Axis• Segmented 86° offset top punch• Hydraulic / Mechanical ram• Solid one piece four way multi vee (“v”) die block• Quick action top tool holder with wedge

type adjustment• Includes safety light

curtain guarding

$54,500.00$52,500+ gst (S910G)

PB-1030 Hydraulic NC Panbrake• 3050 x 3.2mm bending capacity• Easy to use single angle programmable controller

incorporating digital readout 0-130º • Rapid head adjustment to optimise bend

radius on 1-3.2mm material thickness• 3.75kW / 5hp 415V motor

$18,500.00$17,990+ gst (S585)

• 1-Axis Ezy-Set NC-89 Go-To back gauge with fine adjustment• 4 edge 9Crsi blades suitable for stainless steel• Hardened ballscrew backgauge• Rapid blade gap adjustment• 250mm throat depth• Shadow line lighting

HG-2506 / HG-3206 Hydraulic NC Guillotines

HG-25062500 x 6mm

$21,400.00$20,600+ gst (S937)

HG-32063200 x 6mm

$25,400.00$23,900+ gst (S940)

PK-40 Section & Pipe Rolling Machine• 60 x 20mm flat bar capacity• 50 x 10mm flat bar on edge capacity• 30 x 30mm solid square bar• 40 x 40 x 5mm angle capacity• 3 rolls are powered

& pre-bend capable• Hardened & ground rolls & shafts• Cast iron frame

$10,900.00$10,200+ gst (S748A)

DIAMETER CENTRE HEIGHT 110mm 80mm $284 (R005)

152mm 80mm $306 (R006)

203mm 105mm $468 (R008)

254mm 115mm $576 (R010)

Rotary Tables

Tilting Rotary Table RTK-6 Rotary TableDividing Plates & 3 Jaw Chuck Kit• 0-90º Tilt range

• Graduations: 0-360º in 5º increments

• 36:1 Ratio

• Hand wheel graduated in 10min divisions

• Hand wheel can be set to zero• Horizontal or vertical• Height: 41.27mm• 36:1 Ratio

100mm $185 (R0014) 152mm $468 (R0065)

TABLE SURFACE100 x 150mm $171 (L277)

Vertical Mill Slide• 3/8" Tee Slot • Includes 63mm ViceNote: Will only suit Lathes with a centre height of 125mm or larger

LARGER MODELS

AVAILABLE

CHOICE

SAVE

SAVE

SAVE

LARGER KITS

AVAILABLE

SWIVELS 360º

CAST IRON

• 1000 x 1mm steel capacity• Ideal for light sheet metal work• Cast iron construction• Handle operates all functions• Segmented pressbrake top blade

CM-1000 - 3-in-1 Pressbrake, Guillotine & Rolls

3 FUNCTIONS

$1,098.00$990

+ gst (S652)

PYRAMIDSTYLEROLLS

• 2000 x 3mm • 3kW / 4hp 415V motor• Two rolls powered by gearbox & gear system• Motorised up & down top roll for curving adjustment• Safety wire interlock system with emergency shut-off• Mobile control panel with foot pedals

PR-203 Motorised Plate Curving Rolls

$8,900.00$8,550 + gst (S765)

• 2550 x 12mm capacity• Two rolls powered by gearbox system • Mobile control panel with foot pedals • Includes section roll system

with flat bar and pipe dies• Safety wire interlock system• Motorised up & down top roll• 7.5kW / 10hp 415V

PR-2512 Motorised Plate Rolls

$22,990.00$22,200+ gst (S769)

PYRAMIDSTYLEROLLS

• Black oxide finish, tool steel, heat treated• Rolled threads

4.

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31STPrices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.

SIGN UP FORMATES RATESMATES RATES

GAIN ACCESS TO:√ ONLINE PROMOS

√ Paperless Warranty√ NEWSLETTERS

√ LATEST RELEASES√ COMPETITIONSat machineryhouse.co.nz/SIGNUP

√ EXCLUSIVE OFFERS√ TRACK YOUR ORDERS

Note: Inserts not includedUses (L066 or L0661)

Face Mill 90º

DIA TIPS BORE50mm 3 22mm $95 (M510)

63mm 4 27mm $106 (M511)

75mm 5 27mm $124 (M512)

Parallel Sets

4 Matched Pairs $95 (M250)

9 Matched Pairs $189 (M252)

Precision ground to 0.0003" tolerance• 150mm long

(M250)

Studs Table Slot 1/2" 5/8" $63 (C083)

M12 14mm $63 (C0832)

U-Clamps• Material S45C, easy adjustment• Sold in pairs

T-Slot Mini Clamps

Suits Slot G F H13.8mm 24 41 46 $46 (C0861)

15.8mm 27 50 55 $50 (C0871)

17.5mm 29 50 55 $54 (C0881)

• Drop Forged

Cast Iron Vee Blocks

(LxWxH) WIDTH OF VEE 75 x 50 x 50 50 $45 (V003)

100 x 63 x 63 70 $61 (V004)

150 x 50 x 100 100 $88 (V006)

• Supplied in pairs• True 90º Vee

Universal Milling Kit• 12mm end mill • 16mm end mill • 50mm face mill 22mm

mounting spigot • 1 Pkt (10) of inserts

APMT103504PDER (L059)

Lathe Turning Tool Kits Insert TypeConsisting of:• 1 x R/H & L/H tool holder • 1 x boring bar• 1 pack x 10 Inserts

12mm $243 (L450)

16mm $261 (L451)

20mm $342 (L452)

25mm $369 (L453)12mm $115 (L470)

Lathe Threading Tool KitInsert Type• 1 x Right hand external threading tool

12x12mm • 10 x 11ER A60 (60º) inserts• Torx Key

12mm $178 (L456)

16mm $178 (L457)

20mm $189 (L458)

25mm $234 (L459)

Lathe Threading Tool KitsInsert TypeConsisting of:• 1 x Int. & 1 x Ext. tool holder • 4 x inserts 2 x 55˚, 2 x 60˚

(2 x internal & external)

• 1/8HP 240V pump• PVC supply & drain hose• On/Off switch• Magnetic base nozzle• PVC tank

Coolant Pump & Tank

Coolant Pump

MOTOR SUBMERGEVOLTAGE DEPTH

240V 1/8hp 130mm $113 (P232)

415V 1/8hp 130mm $113 (P233)

415V 1/4hp 180mm $248 (P230)

Coolant Hose Kits• Hose 6 x 150mm = 900mm

Note: Inserts not includedUses (L065)

Face Mill 45º Super High-Rake

DIA. TIPS BORE50mm 4 22mm $135 (M515)

63mm 5 22mm $158 (M516)

80mm 6 27mm $189 (M517)

100mm 6 32mm $243 (M518)

• Material: SCM-21 • Hardness HRC 50º-55º

R8

NT40

SIZE (mm) DRAWBAR MT3 x Ø22 1/2" $61 (M562)

MT3 x Ø27 1/2" $61 (M563)

R8 x Ø22 7/16" $61 (M535)

R8 x Ø27 7/16" $61 (M536)

R8 x Ø32 7/16" $61 (M537)

NT30 x Ø22 12mm $64 (M540)

NT30 x Ø27 12mm $64 (M542)

NT30 x Ø32 12mm $64 (M544)

NT30 x Ø40 12mm $99 (M545)

NT40 x Ø22 16mm $95 (M550)

NT40 x Ø27 16mm $95 (M552)

NT40 x Ø32 16mm $95 (M554)

NT40 x Ø40 16mm $95 (M555)

Face Mill Arbors

Note: Inserts not included Uses (L066)• Suitable for steel, cast iron

& non-ferrous metals• Suits 1/2" whitworth

draw bars

Face Mill Cutters

DIA TIPS No. TAPER32mm 2 3MT $82 (M528)

50mm 3 3MT $115 (M529)

Live Centres

2MT $73 (C050)

3MT $82 (C052)

4MT $117 (C054)

Live Centres High Speed

3MT 5000rpm $126 (C0731)

4MT 3500rpm $135 (C0741)

5MT 3000rpm $207 (C0751)

• Accuracy: 0.005mmLive Centre Sets

3MT, 4500rpm400kg Load Capacity

4MT, 3500rpm1300kg Load Capacity

(C0641)

SIZE CONE DIA.3MT 106mm $144 (C045)

4MT 128mm $185 (C046)

5MT 156mm $261 (C047)

Pipe Centres - Bullnose

• 300 x 900mm capacity• 2-Axis digital readout• Hardened & ground bed• 38mm spindle bore• 2hp 240V motor• Includes: 3 & 4-jaw chucks,

faceplate, dead centres, work light, steadies, foot brake, splash tray & stand

AL-336D DELUXE Centre LatheAL-250G Bench Lathe• 250 x 500mm capacity• 26mm spindle bore• 12 spindle speeds• Quick action gearbox• Powered longitudinal

& cross feeds• Forward/reverse

spindle switch• 1hp, 240V motor

AL-356 Centre Lathe• 356 x 1000mm capacity• 2-Axis digital readout system• Quick change toolpost• 51mm spindle bore • 178mm centre height• 1.5kW / 2hp 240V motor• Includes 3 & 4 jaw chucks,

steadies, faceplate, work light, dead centre, leadscrew covers, splash guard & swarf tray

• 250 x 550mm capacity• Precision ground ‘V’ bed• 550W 240V induction motor

with reverse switch• Powered longitudinal feed

& thread cutting capabilities• Hinged belt cover with safety

micro switch

AL-60 (SIEG C6) Bench Lathe

• 430 x 1000mm capacity• 12 speeds• 5.5kW / 7.5HP 415V motor• 78mm spindle bore• Includes: 2 axis DRO, 3 & 4 jaw chuck,

face plate, foot brake, coolant, work light

• 225 x 180mm (W x H) rectangle capacity• Electronic variable blade speed 20-90pmp• Heavy duty gear drive system• Quick action lock/release vice• Swivel head mitre cut to 60° right• Adjustable hydraulic cylinder for auto feed• Coolant system• 1.5kW / 2hp, 240V motor

• 350 x 228mm (W x H) rectangle capacity• Adjustable hydraulic feed cutting

rate for multiple applications• Mitre cuts to 45º using calibrated vice• Quick action material clamping• Adjustable 4-speed pulley drive• Built-in coolant system• 1.1kW / 1.5hp, 240V motor

• 458 x 235mm (W x H) rectangle capacity• Dual mitre semi-automatic operation• Adjustable hydraulic vice pressure regulator• 19-102 M/min Variable speed drive• Auto blade breakage sensor• Mitre cuts to +45º, -60º• Laser line guide• 1.5kW / 2hp 415V motor

TM-1740G Centre Lathe

EB-260V Swivel Head Metal Cutting Band Saw

BS-916A Metal Cutting Band Saw BS-13DS Metal Cutting Band Saw

• 105mm spindle• 2-Axis digital readout system• Taper turning attachment• Quick change toolpost with holders• Precision ‘V’-beds & headstock gears are all hardened & ground• Multiple discs forward and reversing clutch system

CK-100A Centre Lathes• Power inching for easy job set up• Adjustable stroke for faster punching• Punch table & shear table both

fitted with guides as standard• Adjustable length stop with rule• Five work stations, including notcher• All work stations guarded

Hydraulic Punch & Shears IW-80S Hydraulic Punch & Shear

• 255 x 200mm (W x H) rectangular capacity• Electronic variable blade speeds 20 - 75mpm• Rotating table swivels with

cutting head, double mitre cut to 45º right & left, 60º right

• Heavy-duty gear drive system• Machine stand with integrated

cooling fitted as standard• 1.5kW / 2hp 415V motor

EB-320DSV Swivel Head Metal Cutting Band Saw

• 100 Tonne capacity • Sliding cylinder ram• 30mpa working pressure• 350mm piston ram stroke• Safety overload valve• Fitted with pressure gauge• Hydraulic joystick control lever• 7.5kW / 10hp 415V motor• Supplied with hydraulic oil

MDY-100 Industrial Hydraulic Press

• Variable cutting speeds• Table tilts ±15º in all 4 directions• Adjustable tungsten tipped

blade guides• Robust steel frame & cast iron table• Blade tensioning via hand wheel• Blade air blower• Blade welding unit

VB-300 / 450 Vertical Band Saws

$4,490.00$4,100+ gst (L682D)

$1,590.00$1,420+ gst (L148)

$2,300.00$2,200+ gst (B062V)

$2,890.00$2,690+ gst (B015)

$8,690.00$8,490+ gst (B030)

$10,400.00$9,995+ gst (P125MA)

$4,600.00$4,500+ gst (B067D)

$1,900.00$1,798+ gst (L149)

$6,600.00$6,300+ gst (L564D)

$17,200.00$16,300+ gst (L632D)

$18,400.00$17,900+ gst (P175)

• Power inching for easy job set up• Adjustable stroke for faster punching• Hydraulic hold down plate clamping• Punch table & shear table both

fitted with guides as standard• Adjustable length stop with rule• Five work stations• All work stations guarded

IW-100SH Hydraulic Punch & Shear

$24,600.00$24,000+ gst (P176H)

NEWRELEASE

NEWRELEASE

NEWRELEASE

NEWRELEASE

660 x 2000mm$21,990.00$20,990+ gst (L665D)

660 x 3000mm$25,200.00$24,600+ gst (L667D)

$12,750.00$11,990+ gst (P173)

IW-60H60T - 7.5hp

$11,990.00$11,400+ gst (P172)

IW-50A50T - 5hp

• 80 Tonne• Five work stations fully guarded• Dual hydraulic cylinders• Punching capacity up to 50mm standard• Adjustable stroke for faster punching• 10hp, 415V motor

$3,190.00$2,890+ gst (B010)

VB-300310 x 175mm0.37kW 415V

$4,260.00$4,100+ gst (B012)

VB-450455 x 255mm0.75kW 415V

1/4” $52 (H165) 1/2” $73 (H167)

$185 (C0631)

$261 (C0641)

$234 (P235)$261 (M530)

WOW

WOW

SAVE

SAVE

SAVE

OPTIONAL STAND OPTIONAL STAND$290.00$260

+ gst (L143)

$290.00$260

+ gst (L150)

DUAL MITRE

5.

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

Prices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.

Rain checks & prices valid

until 4.00pm Saturday

31 st March 2014

SAVING OF 10%

Deburring Tool Set• 23 piece universal set• Includes: 2 burr holders, sheet metal burr,

10 pack HSS blades, 20mm countersink blade, 2 scraper blades, “V” & inverted “V” scraper, 4 telescopic extensions & wrenches

• 36 Watts, 240V• Double lamp tubes• Head swivels

310˚ & tilts 210˚• Dust proof light head

Fluorescent Light

Toggle Clamps

• 170 Piece 1-10mm • HSS

Workshop Drill SetCC14SF Metal CuttingAbrasive Cut Off Saw

2MT Drill Set 10 Piece• 14.5, 15, 16, 17, 18, 19, 20, 21, 22, & 23mm • 2MT shank, HSS

Reduced Shank Drill Sets - HSS 8 Piece• 13, 14, 15, 16, 18, 20, 22 & 25mm• 13mm reduced shank• 355mm (14”)

• Quick lock vise• Spidnle lock• Easy to operate D-handle

• 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1" • 1/2" reduced shank

2MT x JT2 $12.60 (D4412)

2MT x JT6 $16.20 (D442)

2MT x JT3 $16.20 (D442A)

3MT x JT6 $19.80 (D443)

3MT x JT3 $19.80 (D443A)

3MT x JT4 $27.00 (D455)

4MT x JT6 $27.00 (D454)

4MT x JT3 $27.00 (D454A)

4MT x JT4 $27.00 (D456)

Drill Chuck Arbors

1-10mm Keyed JT2 $37 (C298)

0.5-13mm Keyed JT6 $52 (C289)

0.5-16mm Keyed JT3 $72 (C290)

0.5-13mm Keyless JT6 $88 (C292)

3-16mm Keyless JT3 $104 (C294)

Keyed

Keyless

Drill Chucks

Drill SleevesHardened & Ground

Size Outside Inside 1-2 2MT 1MT $10.80 (D420)

2-3 3MT 2MT $16.20 (D422)

2-4 4MT 2MT $21.00 (D423)

3-4 4MT 3MT $23.00 (D424)

4-5 5MT 4MT $50.00 (D425)

5-6 6MT 5MT $140.00 (D426)

Drill Extension Sleeves Morse Taper

Size Outside Inside 2-2 2MT 2MT $61 (D400)

2-3 2MT 3MT $72 (D401)

3-3 3MT 3MT $102 (D402)

3-4 3MT 4MT $102 (D403)

4-5 4MT 5MT $217 (D404)

Centre Drills HSS Fully Ground

Size Point Shank Diameter1 1.25mm 3.2mm $5.40 (D501)

2 2mm 5mm $7.20 (D502)

3 3.2mm 8mm $9.00 (D503)

4 4mm 10mm $10.80 (D504)

5 5mm 12.5mm $14.40 (D505)

Drill Chuck KeyedBall Bearing Type• Greater tightening force

HSS Drill Set• Tinite coated - 114º point• Suitable for wood &

soft metal

Drill Chucks Keyed

Drill Chuck Keyless With Lock• Superior gripping - Self tightening

feature to increase gripping force

Drill GaugeMetric/Imperial• 1/16 - 1/2" • 1-13mm• Stainless steel

SIZE

100mm $63 (V088)

127mm $99 (V089)

152mm $135 (V090)

Bench Vice Cast Iron Compound Vices

SIZE TRAVEL 100mm 114 x 102mm $75 (V120)

150mm 203 x 152mm $126 (V122)

Compound VicesHeavy Duty

SIZE TRAVEL 105mm 100 x 100mm $99 (V1204)

125mm 125 x 125mm $153 (V1205)

90º Angle Vice Clamps

Deluxe Drill Press Vice

Tilting Drill Press Vice

SIZE OPEN 100mm 100mm $171 (V141)

130mm 110mm $198 (V142)

160mm 115mm $234 (V143)

Precision Drill Press Vices With Step Jaws

SIZE

100mm $21 (V124)

127mm $27 (V125)

152mm $32 (V126)

Drill Press Vices

SIZE OPEN 100mm 100mm $135 (V154)

140mm 140mm $189 (V155)

200mm 200mm $261 (V158)

Heavy Duty Drill Vices

Vice Soft Jaws - Aluminium• Magnetic tabs to ensure

jaws remain fixed to the vice

PRISM

SIZE Plain Prism Rubber100mm $10.80 (V053) (V0537) (V0534)

125mm $10.80 (V0531) (V0538) (V0535)

150mm $12.60 (V0532) (V0539) (V0536)

117R Blacksmiths Cast Steel Anvil• Manufactured from cast steel • Square & round hardy hole• 680 x 200 x 195mm size• 20mm square & round hole

Vice Brake Benders• Bends up to 2mm

thick mild steel• Magnetic back

designed to keep bender on vice

• Segmented blade

SIZE

100mm $41 (V050)

125mm $52 (V051)

150mm $68 (V052)

Offset Fabricated Vices

SIZE OPEN 100mm 125mm $135 (V0914)

125mm 150mm $162 (V0915)

150mm 175mm $234 (V0916)

200mm 220mm $441 (V0918)

SIZE

125mm $162 (V074)

Multi-Purpose Vice• Swivel head & base• Includes anvil & pipe jaws

RUBBER FACE

• 45˚ & 90˚ square holesNOTE: HSS tool bits NOT supplied• Inc. 1 bar

Boring Bar With Holder High Speed Steel Bits

TYPE PIECE SET 1/8" SQ. x 2 1/2" long 3-Pce $10.80 (L0001)

3/16" SQ. x 2 1/2" long 3-Pce $12.60 (L0002)

1/4" SQ. x 2 1/2" long 3-Pce $12.60 (L0003)

5/16" SQ. x 2 1/2" long 3-Pce $14.40 (L0004)

3/8" SQ. x 3" long 2-Pce $16.20 (L0005)

1/2" SQ. x 4" long 1-Pce $12.60 (L0006)

PART OFF BLADES1/2" x 3/32" x 4" long 1-Pce $19.80 (L0007)

5/8" x 3/32" x 5" long 1-Pce $27.00 (L0116)

• Kit includes: turning, profiling, parting, threading, roughing tools & 1 x Insert per tool

Turning Tool Set 16mm• Kit includes: turning, profiling, parting,

threading, roughing tools & 1 x Insert per tool

Turning Tool Set 12mm

Knurling Tool Holders(L079)

(L080)

(L070)

NOTE: HSS tool bits NOT supplied (L002B)

Turning Tool Holders

Knurling Tool Holder Kit• Head 1: Medium (2 Wheels)• Head 2: Fine (2 Wheels)• Head 3: Straight (1 Wheel)• Suits Centre Height: 12 or 16mm

• 12mm centre heightNOTE: Parting blade not suppliedUses Parting Blade L0007

Parting Tool Holder Lathe Parting Tool Kit - Insert TypeConsisting of:• Parting off block, blade, insert remover & hex key• 12, 16 & 20mm kits include 2 Inserts• 25mm kit includes 10 Inserts

Turning Tool Set 10mm• Includes: turning tools, boring bar 4 x Turning inserts: (TCMT110204) 1 x Boring inserts: (TCMT090204) • Comes in a deluxe case

Boring Bar Set • Boring Bars:

8, 10, 12, 16mm• 10 x Inserts

CCMT060204

Boring Bar Set • Boring Bars:

8, 10, 12mm• 3 x Inserts

CCMT060204

Lathe Tool Kit - HSS• Suits 10-12mm centre height• Includes: 1 x R & L/H & straight tool holder 1 x 3/8" HSS boring bar 2 x 1/8" & 2 x 3/16" HSS tool bits

a new dimension in quality & value

150mm/6” $90 (Q180)

200mm/8” $115 (Q181)

300mm/12” $168 (Q182)

300mm/12” $90 (Q200)

300mm $90 (Q200A)

Digital CalipersNew I/O Glass Scale Technology IP54 Splash Proof0.01mm/0.0005" Resolution

Micrometers

Micrometer Sets• Engraved graduations on protractor • 4 piece set

Combination Sets

(Q211)

Dial Indicators0-10mm 0.01mm $49 (Q211)

0-1”mm 0.001” $49 (Q212)

12mm 26 x 2mm blade $176 (L464)

16mm 26 x 2mm blade $176 (L465)

20mm 26 x 3mm blade $176 (L466)

25mm 32 x 3mm blade $280 (L467)

0-0.8mm 0.01mm $90 (Q217)

4 Piece 0-100mm 0.01mm $144 (Q114)

6 Piece 0-150mm 0.01mm $282 (Q115)

Dial Test Indicator

Rulers Metric one side / Imperial on the other side

Engineers Squares Spring Calipers

ScribersDouble Ended Scriber 190mm $10.20 (Q630)

Pocket Scriber 150mm $18.70 (Q631)

22W Fluorescent Work Light With Magnifier• 22W fluorescent tube• Swivel & pivoting arm• Includes magnified lens

Magnetic Pick Up Tool & Inspection Mirror Set• Ø50mm Mirror extends 240-920mm• Magnet tool extends 165-695mm• Fixed & swivel magnets

can carry 3.6kgs• Fixed magnet can

carry 2.3kgs

• Cushion grip handle• 250mm length files

Engineers Files

TYPE GRADE PRICE CODEFlat Coarse $11.90 (F120)

Flat Second Cut $11.90 (F121)

Flat Smooth $11.90 (F122)

Half Round Coarse $11.90 (F124)

Half Round Second Cut $11.90 (F125)

Half Round Smooth $11.90 (F126)

Round Coarse $11.90 (F127)

Round Second Cut $11.90 (F128)

Round Smooth $11.90 (F129)

• 1/2” impact gun• 1/4” die grinder• 3/8” ratchet wrench• Air hammer & chisel set

Air Tool Kit

Flexible Head Telescopic Magnetic Pick Up Tool • 3 x LED lights • Flexible head• Extends 170 - 545mm• Magnet can carry 2.27kg's• Includes 4 x LR44 batteries

150mm / 0-180ºStainless steel$25 (Q601)

Pocket Protractor

• 4 x screw on flute countersinks for hole deburring & chamfering 6mm, 10mm, 14mm, 18mm

• 1 x deburring tool • 1 x HSS blade• 1 x pocket clip

deburring tool

Deburring Tool SetUniversal

KL-12130Vertical 227kg $14.40 (C100)

KL-102BVertical100kg $12.60 (C1001)

KL-225DHorizontal250kg $14.40 (C1005)

KL-201CHorizontal100kg $19.80 (C1003)

KL-36020Straight Line220kg $19.80(C1008)

RANGE ACCURACY

0-1” 0.004” $30 (Q101)

1-2” 0.004” $37 (Q103)

2-3” 0.005” $39 (Q106)

3-4” 0.005” $59 (Q109)

0-25mm 0.004mm $30 (Q102)

25-50mm 0.004mm $37 (Q105)

50-75mm 0.005mm $39 (Q107)

75-100mm 0.005mm $59 (Q110)

www.measumax.com

150mm/6” $6.80 (Q620)

300mm/12” $13.60 (Q621)

75mm $27 (Q644)

100mm $35 (Q645)

150mm $39 (Q646)

255mm $59 (Q647)

Dividers $10.20 (Q634)

Inside $10.20 (Q635)

Outside $10.20 (Q636)

600mm/24” $18.70 (Q622)

1000mm/40” $23.00 (Q623)

Grade B 90º Inside/Outside

“Now there is an alternative”

BLADE SIZE1/2” x 3/32” $52 (L074)

KNURL PITCHMedium $37 (L079)

Medium $72 (L080)

Coarse, Medium, Fine $82 (L070) $93 (L076)

$145 (L431)$288 (L430)

1-16mm x JT3$41 (C2985)

1-13mm x JT6$63 (C299)

25 Piece Metric1-13mm$37 (D120)

29 Piece Imperial1/16 - 1/2”$37 (D121)

1-19mm x JT4$156 (C297)

1-13mm x JT6$32 (C2982)

$82 (L0055)$189 (L0099)

$189 (L0077)

$79.00 (L072)

BORING BAR HOLDERLENGTH x DIA. LENGTH x SQUARE

4 1/2 x Ø3/8” 2 1/8 x 1/2” $19.80 (L100)

5 1/4 x Ø7/16” 2 1/2 x 5/8” $21.00 (L101)

6 3/4 x Ø9/16” 3 x 3/4” $27.00 (L102)

9 1/2 x Ø3/4” 3.3/4 x 1” $37.00 (L103)

11 1/2 x Ø15/16” 4 1/2 x 1 1/4” $41.00 (L104)

HAND SHANK W x H LENGTH

Left 5/8 x 3/4” 7 1/2” $37.00 (L075L)

Right 5/8 x 3/4” 7 1/2” $37.00 (L075R)

Straight 5/8 x 3/4” 7 1/2” $37.00 (L075S)

HAND SHANK W x H LENGTH

Left 3/8 x 7/8” 5” $37.00 (L070L)

Right 3/8 x 7/8” 5” $37.00 (L070R)

Straight 3/8 x 7/8” 5” $37.00 (L070S)

ENGLISH STYLEDROP HEAD

AMERICAN STYLE

NEWRELEASE

$16.20 (M988)

$176 (D126)$338 (Y350)

$82 (D117)$82 (D118)

$612 (A020)

$115 (D119)$165 (A053)

$18.70 (T9501)

$18.70 (M0009)

$54 (D062)$104 (D065)

$167 (L2825)

$153 (L282)

PLAIN60mm$79 (V099)

100mm$72 (V144)

100mm$99 (V100)

127mm$84 (V145)

100mm$63 (V114)

240V

240V

NEWRELEASE

NEWRELEASE

NEWRELEASE

WOW

WOW

CHOICE

SAVE

SAVE

6.

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST

LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31ST LIMITED STOCK EVERYTHING ON SALE MUST END MARCH 31STPrices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.

• 4 piece • HSS M2

Bright Finish • Cross hole type • Sizes Ø: 2-5, 5-10, 10-15, 15-20mm

• Angle 45°

Industrial Countersink Sets

• Manufactured from HSS M35 5% Co Bright Finish Screwed Shank

• Two Flute

Slot Drill Set End Mill Set

5 PIECE METRIC6, 8, 10, 12, 16mm

5 PIECE METRIC6, 8, 10, 12, 16mm

• Manufactured from micro fine solid carbide

• Bright Finish• Plain Shank

End Mill Set Solid Carbide

4 PIECE METRIC6, 8, 10, 12mm

• Manufactured from HSS M2• Plain shank• Includes 5 end mills & 5 slot drills

Slot Drill & End Mill Sets

10 PIECE METRIC6, 10, 12, 16, 20mm

10 PIECE IMPERIAL1/4", 3/8", 1/2", 5/8", 3/4"

• 6 piece suitable for sheetmetal

• HSS M2 Bright Finish

• 3 flute type • Sizes Ø: 1.5-6.3,

6.3-8.3, 8.3-10.4, 10.4-12.4, 12.4-16.5, 16.5-20.5mm

• Precision ground flutes • HSS M2 bright finish• 118º split point centre

Industrial Drill Sets

$69 (M3351)

$59 (D1051)

$98 (M3391)

$35 (D508)

$81 (D1281)

$86 (D1272)

$178 (D122)

$103 (M3301)$103 (M3321)

$125 (D1181)

$125 (D1171)

$90 (D1285)

$69 (D1071)$102 (D102)

$83 (M3355)$44 (T0191)

$69 (D1061)$98 (M3381)

$136 (M337)

• 100% HSS flute length• Sizes 14.5, 15, 16, 17,

18, 19, 20, 21, 22, 23mm

2Mt Shank Drill Set

29 PIECE IMPERIAL1/16" - 1/2" (x 1/64")

25 PIECE Metric1 - 13mm (x 0.5mm)

$69 (M3352)

• HSS M35 Bright finish

• Plain Shank• 6 piece set• Range: M3, M4,

M5, M6, M8, M10

Counterbore Set

• HSS M35 5% Co Bright Finish

• Plain Shank• 2 Flute • Shank sizes: 6, 10,

10, 12, 16mm

Ball Nose Cutter Set

5 PIECE METRIC6, 8, 10, 12, 16mm

• 4 piece set• High Grade

HSS M35 bright finish

• Radius sizes: 4, 5, 6, 8mm

• Shank sizes: 12, 12, 16, 20mm

Radius Cutter Set

Reduced Shank Drill Sets

8 PIECE IMPERIAL9/16" - 1" RangeShank Ø1/2"

8 PIECE METRICRange: 13 - 25mmShank Ø13mm

• Industrial quality• High speed steel M2 grade 100% flute length• 118º point angle

• HSS M2 bright finish• Hex Shank• M3, M4, M5, M6,

M8, M10• Includes Hex

snap-on for hand drill

Combination Drill & Tap Set

• Industrial quality• HSS M2 bright

finish• No. 1, 2, 3, 4, 5

Centre Drill Set

Rain checks & prices valid

until 4.00pm Saturday

31 st March 2014

• Bi-Metal high speed steel • 11 Sizes: 19, 22, 25, 32, 35, 38,

44, 51, 57, 64, 76mm• Includes 3/8" & 1/2" shank arbors • Pilot drill & spring

Hole Saw Set - HSS• 3 Piece set• HSS M2 bright finish• Shank sizes:

4-12 x 1mm, 6-20 x 2mm, 6-30 x 2mm

Sheet Metal Step Drill Set

• High Speed Steel • Made to DIN345 standardMorse Taper Shank Drills Ø (mm) TAPER CODE

12.5 1MT $13.60 (D300)

13 1MT $13.60 (D301)

13.5 1MT $15.30 (D302)

14 1MT $17.00 (D303)

14.5 2MT $17.00 (D304)

15 2MT $18.70 (D305)

15.5 2MT $18.70 (D306)

16 2MT $18.70 (D307)

16.5 2MT $20.00 (D308)

17 2MT $20.00 (D309)

17.5 2MT $20.00 (D310)

18 2MT $22.00 (D311)

Ø (mm) TAPER CODE

21.5 2MT $30.00 (D318)

22 2MT $32.00 (D319)

22.5 2MT $37.00 (D320)

23 2MT $37.00 (D321)

23.5 3MT $39.00 (D322)

24 3MT $39.00 (D323)

24.5 3MT $40.00 (D324)

25 3MT $40.00 (D325)

25.5 3MT $40.00 (D326)

26 3MT $47.00 (D327)

26.5 3MT $47.00 (D328)

27 3MT $47.00 (D329)

• Industrial M2 grade high speed steel • Ground flutes• 118º split point

Industrial Drill PacksØ (mm) QTY CODE

1 6 $10.20 (D8010)

1.5 6 $10.20 (D8015)

2 6 $10.20 (D8020)

2.5 6 $10.20 (D8025)

3 6 $10.20 (D8030)

3.5 6 $10.20 (D8035)

4 6 $10.20 (D8040)

4.5 6 $10.20 (D8045)

Ø (mm) QTY CODE

7 4 $10.20 (D8070)

7.5 4 $10.20 (D8075)

8 3 $10.20 (D8080)

8.5 3 $10.20 (D8085)

9 2 $10.20 (D8090)

9.5 2 $10.20 (D8095)

10 2 $10.20 (D8100)

10.5 2 $10.20 (D8105)

• Precision ground flutes • HSS M2 bright finish

51 PIECE METRIC1 - 6mm (x 0.1mm)

• Manufactured from HSS M35 5% Co Bright Finish Screwed Shank

• Four Flute

$90 (D108)

• Heat resistant carbide teeth• Suitable for stainless steel, steel, fibre

glass & glass reinforced products• 16, 20, 22, 25, 28, 30, 32, 35mm cutters

Hole Saw Set - Carbide

NEWRELEASE

LARGER SIZES AVAILABLE

LARGER SIZES AVAILABLE

cs-55 Circular Plunge Cut Saw• 160mm saw blade• 45º saw head tilt • 1.2kW/1.6hp, 240V• Includes guide rail, clamps & stops

160 mm

1.2 kW

55 mm

OS-58 Bobbin Sander• 1/2”, 3/4”, 1”, 1-1/2”, 2” & 3”• 370 x 290mm cast iron table • Rotating & oscillating• 450W / 240V motor

bts 900x Belt & Disc Linisher• 100 x 915mm belt• Ø150mm disc• Tilting table & mitre guide• 370W 240V motor

Deco Flex Scroll Saw• 406mm throat capacity• Tilting table 0-45º• 90W / 240V motor• Variable speeds• Includes light, air blower & flexible

shaft with chuck

hf-50 Bench Top Router• 610 x 360mm cast iron table• 8000 - 24000rpm variable speed• 0 - 40mm spindle height• 1.5kW / 2hp, 240V motor

T-330 Thicknesser• 330 x 152mm capacity• 2 speed feed gearbox• Digital height DRO• 2.4hp 240V motor

T-318 Thicknesser• 318 x 160mm capacity• 2 x HSS blades• Anti-kick back fingers• 2.7hp, 240V motor

T-380A Thicknesser• 380 x 150mm capacity• 3 x HSS blades• Digital height gauge• 2 speed gearbox feed• 1.5kw / 2hp, 240V motor

• 150mm width capacity• 1200mm cast iron table• 3 blade cutter head• 0.75kW / 1hp 240V motor

PT-6 Planer Jointer• 200mm width capacity• Long 1785mm cast iron table

with 13mm rebating• 2hp 15A 240V• 4 blade cutter head

P-200H Planer Jointer

240V15 A

mp

Plug

Plana 3.0 Planer & Thicknesser Combination

• 260 x 1050mm cast iron table• 250 x 210mm thickness capacity• Ø100mm dust outlet• Large professional planing fence• Cast Iron thickness table adjustment

to 1/10mm for super fine finishing• 3hp 240V 15A motor

The Plana 3.0 is the most efficient and cost effective planer & thicknesser available for the professional user, serious home woodworkers and educational workshops.

240V15 A

mp

Plug

SP-300 Spindle Moulder• 4 speeds fwd/rev• 710 x 640mm table• Tilt arbor to 30º• 3hp 240V

15A plug

• 1200 cfm - HVLP system• Portable on wheels• 5 Micron fine filter bag• 1.5kW/2hp, 240V motor

DC-3 Dust Collector

MBW-2 Mobile Base• 279 x 279mm minimum• 894 x 894mm maximum• 2 wheels with lever action for raising

MBW-4 Mobile Base

SB-12 Table Saw• Ø300mm TCT blade• 510 x 686mm cast table• Tilt arbor 45º • 3hp, 240V motor

L-80 Belt Sander• 150mm wide belt• 755 x 250mm cast iron table• Belt tilts horizontal &vertical• 1.5hp 240V motor

• 635mm maximum sanding width• Min/Max work piece (6 - 127mm)• Variable speed conveyor feed• 1600rpm sanding drum speed2 x 100mm dust outlets• 3hp 240V 15A plug

DS-25 Twin Drum Sander• 400mm sanding width• 3.2 ~ 127mm sanding height• 1720rpm drum speed• Variable table feeds• 0.75kW/1hp. 240V motor

DS-1632 Drum Sander

L-612 Belt & Disc Linisher Sander• 150 x 1220mm belt • Ø305mm disc • Cast iron tilting disc table• Use linisher in vertical

or horizontal position• 2hp 240V - 15Amp

• 305 x 175mm capacity • Cast iron table tilts 45º• 2 x blade speeds • 0.75kW / 1hp 240V• Includes: stand, mitre

guide & heavy duty rip fence

BP-305 Band Saw Basato 3h Vario Band Saw• 305 x 205mm capacity• Variable blade speed• Table tilts from -17º to +45º• 0.8kW / 1.06hp, 240V motor• Includes heavy duty mitre gauge

& 95mm dust chute

$360.00$324 + gst

(W874)

$260.00$234 + gst

(W843)

$190.00$171+ gst (W348)

$420.00$378+ gst (W800)

$58.00$52+ gst (W801)

$580.00$522+ gst (W619)

$370.00$333+ gst (W394)

$1,050.00$960+ gst (W452)

$210.00$189+ gst (W931)

$92.00$82+ gst (W930)

$932.00$840+ gst (L110)

$1,060.00$950+ gst (L112)

$520.00$468+ gst (W4202)

$1,060.00$960+ gst (L108)

$798.00$720+ gst (W855)

$560.00$504+ gst (W805)

$370.00$333+ gst (W846)

$210.00$189 + gst

(L105)

Use as a plunge saw.

Use instead of a circular saw bench for precise parallel panel sizing.

Use as a normal portable circular hand saw.

STAND

INCLUDED MADE IN

TAIWAN

$1,610.00$1,449+ gst (W414)

$1,790.00$1,611+ gst (W850)

$1,140.00$1,026+ gst (W629)

$2,360.00$2,124+ gst (W640)

$2,440.00$2,196+ gst (L129)

WL-18 Wood Lathe (W382)

WOOD CHISELS (HSS)8 PIECE SET Up to 230mm Handle (W301)

• 310 x 900mm turning capacity• Swivelling headstock• Variable speed 500-2000rpm• 0.75kW/1hp, 240V motor• Includes bowl turning attachment

faceplate, drive & live centres toolrest & stand

$740 +GST

PACKAGE DEAL PRICEONLY

(K020)

SAVE$170 RRP

100mm SCROLL CHUCK• 1" x 10TPI thread (W370)

100mm SCROLL CHUCK• 1" x 10TPI thread (W370)

• 580 x 580mm minimum• 750 x 850 maximum• Square steel tube frame

454kg LOAD CAP.227kg LOAD CAP.

OPTIONAL STAND

CHOICE

WOW

SAVE

WOW

CHOICE

7.

www.machineryhouse.co.nzPrices & specifications are subject to change without notification. All Prices exclude GST. Rain checks & prices valid until 31/03/14.GOODS DISPATCHED PROMPTLY ON RECEIPT OF YOUR CHEQUE, MASTERCARD or VISA PAYMENT. TELEPHONE ORDERS ACCEPTED. IRD 98046305

UNIT D/38 HIGHBROOK DR, EAST TAMAKI 2013 (09) 2717 234BUY ONLINEOVER 3,500 PRODUCTS

IS ON SALE

36”

30”

48”

INDUSTRIAL TOOL BOX SET

PACKAGE DEAL SUPERSPECIAL

ITB-48 Industrial Tool Box• 1220 x 630 x 700mm (L x W x D)

• 1.6mm thickness Mild Steel• Dual Gas strut support lid• 2 x security pad lockable latches• Box section for forklift access• Powder coated finish

WCH-6D 6 Drawer Tool Chest600 x 260 x 340mm (LxWxH)

IRC-7D7 DrawerRoller Cabinet1067 x 458 x 1007mm(LxWxH)

ISC-7D7 Drawer Side Cabinet430 x 460 x 845mm (LxWxH)

TCH-12D12 Drawer Tool Chest670 x 445 x 495mm (LxWxH)

WRC-5D5 Drawer Roller Cabinet616 x 330 x 762mm(LxWxH)

Tool Chest & Roller Cabinet• Includes drawer liners • Key lockable• Ball bearing slides

• Ball bearing slides • Lockable by key • Powder coated quality finish

WORKSHOP Series TRADE Series INDUSTRIAL SeriesTool Chests & Roller Cabinet• Heavy duty ball bearing slides • Lockable by key • Protective drawer liner • Powder coated quality finish • Ideal for home hobbyist or tradesmen

Tool Chest & Roller Cabinet

DESIGN YOURULTIMATE TOOL BOX COMBO

UNLIMITED CONFIGURATIONS

Single Unit Configurations

Multiple Unit Configurations

Optional - 2 Unit Configuration

TCH-3DE3 Drawer Tool Chest670 x 315 x 265mm (LxWxH)

TCH-6D6 Drawer Tool Chest670 x 310 x 375mm (LxWxH)

ICH-8D8 Drawer Tool Chest1051 x 445 x 552mm(LxWxH)

ISL-2D2 Drawer Side Locker425 x 460 x 1390mm(LxWxH)

TRC-7D7 Drawer Roller Cabinet685 x 470 x 1000mm (LxWxH)

ITB-3036 Industrial Tool Box Set• 775 x 430 x 310mm (30” box) (L x W x D)

• 915 x 440 x 570mm (36” box) (L x W x D)

• Lifting handles on either side• Single latch on (30” box) • Single gas strut lid (36” box)• Powder coated finish

RTS-4T Flexi-Rack Wood Shelving• 1040 x 430 x 1830mm (L x W x H)

• 455kg per shelf• Adjustable shelf height• Can set up as work bench

• The sliding drawers are a welded strengthened single rail design coupled with high quality mechanical bearings for long lasting smooth operation

• 100kg drawer capacity • Single key lock design for safe storage• 2 fixed & 2 swivel Ø125mm castor wheels (T766/T768)• Dimensions: W x D x H

Industrial Tooling Cabinets

TCW-954N565 x 653 x 954mm

TCW-954W723 x 653 x 954mm

TC-750 6 Drawer565 x 580 x 750mm

TCT-1200 7 Drawer565 x 653 x 1200mm

TCW-1200 Drawer881 x 653 x 1200mm

WBT-38 Work Bench with Backing Panel• 1370 x 510 x 1570mm

(L x W x H)• Adjustable shelves• Ball bearing slide drawers• Backing panel suits optional

hooks & buckets

SR-72 1740 x 410 x 1705mm

SR-36 880 x 410 x 1705mm

SR-22 880 x 410 x 950mm

Mobile Storage Bin Racks• Heavy duty plastic bins • Steel frame with silver powder coated finish• Zinc plated wire shelving • 4 or 6 x Ø100mm swivel caster wheels

(2 x lockable)

WBS-5D Work Bench• 1370 x 510 x 890mm (L x W x H)

• Ball bearing slide drawers• Powder coated quality finish

Mobile Storage System .. (T790) 886 x 650 x 1405mm

2 x Single Prong Hook .... (A440)

2 x Double Prong Hook ... (A442)

1 x Triple Prong Hook ..... (A444)

1 x Spanner Holder .......... (A446)

1 x Screw Driver Holder . (A448)

Plastic Buckets (W x D x H)

• 8 x (105 x 110 x 50mm) ..... (A430)

• 8 x (105 x 140 x 75mm) ..... (A432)

• 6 x (140 x 220 x 125mm) ... (A434)

• 6 x (140 x 270 x 125mm) ... (A436)

SR-DSL Mobile Storage Shelving System with Accessories

T774

T775

TC-900 Tooling Cabinet900 x 450 x 900mm(L x W x H)

STORAGE CABINET PACKAGE DEAL

BSC-900 Storage Cabinet900 x 450 x 900mm(L x W x H)

• 900 x 450 x 1800mm (L x W x H)

• 150kg shelf load capacity• 75kg drawer capacity• Made from

reinforced metal

SC-1800 Industrial Storage Cabinet

WBS-3D Work Bench• 2000 x 640 x 870mm• 3 Lockable drawers• Bearing slide drawers• Huge shelf compartment

(T736A + T738)

Industrial Truck Tool Boxes• 4 x heavy duty side handles• Dual gas struts supports lid• Ball bearing slides on drawers• Includes rubber drawer liners

TB-EC70/22 Drawer702 x 404 x 585mm (L x W x H)

TB-EC70F/33 Drawer702 x 404 x 590mm (L x W x H)

TB-HD120/22 Drawer1210 x 600 x 750mm (L x W x H)

TB-HD150/44 Drawer1500 x 600 x 750mm (L x W x H)

Parts Bins• ABS drawers - oil & impact resistant• Includes drawer dividers

MODEL PTB-20 PTB-32 PTB-60 PTB-24C PTB-48C PTB-48CD PTB-18C PTB-15C PTB-30CORDER CODE T7951 T7952 T7953 T7955 T7956 T7958 T7961 T7962 T7964

Drawers Qty / Type 20 / ABS 32 / ABS 60 / ABS 24 / ABS+Clear 48 / ABS+Clear 48 / ABS+Clear 18 / ABS+Clear 15 / ABS+Clear 30 / ABS+Clear

Drawers (L x W x H) mm 90 x 218 x 70 90 x 218 x 70 90 x 218 x 70 120 x 218 x 69 120 x 218 x 69 120 x 218 x 69 164 x 375 x 105 164 x 375 x 105 164 x 375 x 105

Cabinet (L x W x H) mm 586 x 222 x 350 466 x 222 x 642 586 x 222 x 937 444 x 222 x 642 586 x 222 x 937 586 x 270 x 970 550 x 400 x 880 880 x 400 x 440 880 x 400 x 880

PRICE + GST $180 $220 $390 $210 $380 $520 $390 $350 $560

(T7951) (T7955) (T7956) (T7958) (T7961)(T7952) (T7953) (T7962) (T7964)

PTB-W45 Mobile Base596 x 454 x 160mm (L x W x H)

Suits: 2 x T7953, 2 x T7956$140 + gst (T797)

PTB-W41 Mobile Base890 x 410 x 185mm (L x W x H)

Suits: T7962, T7964$150 + gst (T7971)

455kg

455kg

455kg

$260 +GSTONLYPACKAGE PRICE (K004)

T690 + T695

$1,100 +GST

$590 +GST

ONLY

ONLY

(K033)

(K032)

T774 + T775

$510 +GSTONLYPACKAGE PRICE (K006)

T700 + T715

$610 +GSTONLYPACKAGE PRICE (K006B)

T700 + T701 + T715

$640+GSTONLYPACKAGE PRICE (K006A)

T706 + T715

$92.00$86

+ gst (T690)

$260.00$220 + gst (T736A)

$390.00$350 + gst (T745)

$350.00$330 + gst (A383)

$420.00$398 + gst (A380)

$242.00$216 + gst (S020)

$430.00$390 + gst (S021)

$798.00$750 + gst (S022)

$210.00$196 + gst (S013)

$798.00$760

+ gst (T762)

$320.00$300

+ gst (T774)

$430.00$390 + gst (T7463)

$1,050.00$940 + gst (T7445)

$830.00$790 + gst (T7442)

TB-HD70/22 Drawer700 x 600 x 750mm (L x W x H)$630.00$590 + gst (T744)

ALL 3 ONLY

$570 + gst

$420.00$380 + gst (T738)

$510.00$460 + gst (A384)

$890.00$840 + gst (T775)

$750.00$720 + gst (T766)

$650.00$620 + gst (T764)

$890.00$840 + gst (T770)$890.00

$840 + gst (T768)

$210.00$190

+ gst (T695)

$190.00$175

+ gst (T700)

$126.00$110

+ gst (T701)

$340.00$330

+ gst (T706)

$370.00$350

+ gst (T715)

$498.00$480

+ gst (T720)

$340.00$310

+ gst (T727)

$316.00$296

+ gst (T726)

$690.00$680

+ gst (T724)

A.

A.

B.

C.

C. C.

D.

E.

E.

F.

1.

1.

2.

2.

3.

3.

4.

4.

F.

F.F.

D.

B.

SAVE$42 RRP

SAVE$50 RRP SAVE

$76 RRP

SAVE$70 RRP

SAVE$234.40 RRP

SAVE$110 RRP

NEWRELEASE

NEWRELEASE

NEWRELEASE

22 BINS

6 DRAWERS

36 BINS 72 BINS

WOWSAVE

$1,090.00$1,030 + gst (T772)

CHOICE