7
www.apd.co.nz NZ’S LARGEST PLASTICS FABRICATOR OF ABOVE AND BELOW GROUND TANKS AND SYSTEMS
www.apd.co.nz
NZ’s largest plastics fabricator of above aNd below grouNd taNks aNd systems
Contentsapd rainworx system 2 - 3
underground rainwater tanks 4 - 5
made to order 6
rectangular rainwater tanks 7
dnp sewage pumping station 8 - 9
Why APD
13-15 Joval place wiri, auckland 2104
po box 12 663, penrose 1642, auckland, New Zealand
Richard Ruddellrichard is responsible for quoting the more complex detention/retention solutions for residential and commercial applications. richard is our resident technical expert for stormwater and rain Harvesting solutions. richard is available anytime to discuss your projects from the early planning phases to help ensure the most efficient solution is achieved.
ph: 09 280 3799 mobile: 021 402 805 email: [email protected]
Wayne Smithwayne is responsible for detention tank, rain Harvesting systems and pumping station sales to the residential and commercial markets. wayne is available anytime for onsite meetings and consultations to help formulate the most effective solution to meet your needs.
mobile: 0272 387 684 email: [email protected]
Craig Litherlandcraig is responsible for detention tank, rain Harvesting systems and pumping station sales to the residential and commercial markets. craig is available anytime for onsite meetings and consultations to help formulate the most effective solution to meet your needs.
mobile: 0272 033 910 email: [email protected]
www.apd.co.nz
apd is the largest plastics fabrication company in New Zealand and has been in the business of designing and building above and below ground tanks, pipelines and bespoke products for over 15 years.
Leadership
apd ltd is a leader in plastic design, fabrication & welding of products for the NZ and australian markets. we were the first
company in NZ with an approved code of practice to fabricate chemical storage tanks to HsNo standards.
Expertise
apd is a NZ owned company that provides solutions in plastics and strives for high quality and customer service within the
industry. all of our fabricators either hold certificates in hot air welding and extrusion welding or are currently completing
their certificates.
yearly welding testing is conducted to confirm their competence.
Quality
apd prides itself on using the latest technology in welding equipment allowing us to weld our products in accordance
with the dvs series of standards for plastic fabrication and our above ground tanks are all designed in accordance with the
standards eN1778 and bs eN12573.
our sheet butt welder is the largest in New Zealand and we are able to weld sheets up to 50mm thick and 4m long allowing
us to build tanks up to 60,000l with ease.
we understand that off-the-shelf products do not suit all business needs. our extensive product range is complemented
by our engineering and design expertise meaning we offer commercial and domestic solutions for any type, or size of
storage problem.
Some of our product range includes:
• chemical storage tanks
• underground water retention/detention systems
• rain Harvesting systems
• open top process tanks
• boat and rv tanks
• Hvac ducting suitable for chemical applications and
council swimming pool environments
• piping systems for chemical, water and waste water
plants
Please refer to our website www.apd.co.nz where you can review our latest products
Pump Optionswhether you have a modern urban home or a classic villa, whatever your needs we have the right solution for you. all apd rainworx® systems include a stormlite® tank, sized to your requirements with all internal pipe work completed with your choice of submersible or surface mounted pump system.
our exclusive tank design comes with:
• pre-fitted internal pipework—avoiding the hassle and risks of sending workmen inside the tank for installation
• silt trap—preventing build up of silt that could cause premature pump failure and pumping of dirty water into the household (works with specially designed pump platform for submersible pumps and our water strainer for surface mounted pumps)
Submersible Pump Option Underground means less noise and less on view above the surface.
raiN HarvestiNg made easy with the
APD Rainworx System
Surface Mounted Pump Option Even easier access for maintenance means peace of mind.
Submersible Pump System
Mains Water Backup
RainworxCabinet
Having to install a storm water detention tank to meet council requirements?
the apd rainworx® system will harvest and recycle your valuable rainwater for toilets, washing clothes, watering the garden and washing your car.
with the tank installed underground usable outdoor space is maximised and visible obstruction is removed.
What you get when you buy from the RainWorx® range:Complete package: along with the stormlite© tank we supply the pumps, controllers, pipe work and covers ready to connect to your plumbing and to integrate with the public water supply.
Quality parts: we are NZ’s leading plastic tank fabricators, providing the highest quality. all our tanks come with a design life of 25 years and our quality tank design offers long term peace of mind with maximised service life for all parts.
Flexible options: every household’s needs are unique and because our tanks are made to order you can have the right set up. you only pay for what you need.
Efficient and intelligent system: apd rainworx® systems automatically switch to mains pressure water if the retention tank is empty or if mains power fails. our unique tank design means 100% of the tank capacity is used while still meeting council requirements.
Ready when you want it: made to order in just 2—5 days
Want to know more? Speak to one of our experts today on: 09 263 7741
pre-fitted internal pipework
pre-fitted internal pipework
exclusive design pump platform water strainer
silt trap silt trap
RainWorx® System Packages
• user friendly status monitors
• testable back flow protector (double check valve)
• isolation valves
• inline filter, all fittings and bracketing
• water level indicator (optional)
• custom packages available on request
www.apd.co.nz 5
Did you know…we can provide customised commercial packages for medium
to large scale jobs: apartment complexes, residential
developments etc.
OPtiOn A OPtiOn B
Classic RainWorx® kit
• wall mounted for quick and effortless access
• all pre-assembled and leak tested
RainWorx® Surface Mounted Pump kit
• House the entire pump for easy maintenance
• supplied as a kit-set
350mm
ø645mm
ø800mm
ø1000mm
ø1200mm
330mm
length to achieve specified volume
600mm
maN way access
iNlet
silt trap
overflow
outlet
www.apd.co.nz 7
STORMLITE® RETEnTIOn & DETEnTIOn
Underground Rainwater Tanksdesigned with you in mind from NZ’s leading plastic tank fabricators
simple, adaptable & cost effectivestormlite® underground tanks are a simple, adaptable, cost effective solution to your storm water detention and retention, rain harvesting and water recycling needs.
out of sightsave precious outdoor space on your section and eliminate the intrusive sight of above ground tanks. stormlite® tanks are buried out of sight and can be installed under traffic areas, gardens or lawns.
various diameters availableavailable in four diameters, 645mm, 800mm, 1000mm and 1200mm.
Diameters quoted are nominal.
The tank Outer Diameter will be 50mm to
100mm more than the nominal size.
volume as specified
stormlite® tank lengths are designed and manufactured to provide the volume specified. made from tough polyethylene corrugated pipe which will not rot or corrode and can be recycled.
ready to installstormlite® tanks come complete with fittings including seals, orifice end caps and leaf mesh ready to be installed. standard fittings included at 100 mm diameter are:
•Threewallacesealsforinlet,outletandoverflow. inlet/s can be in either or both ends.
•EndcapsaredrillablePVCcapswhichfitoverthe outlet pipe/s from the inside of the tank.
•Leaftrapmeshbasket.
150mm diameter fittings are also available as are larger pe spigots or stub flanges.
made to your requirementwhen it comes to underground rain water tanks, one size does not fit all. stormlite® tanks are all made to individual site requirements whilst meeting council specifications. within a few days (2 – 5 days of order), you get exactly what you need delivered to site, for easy installation and a long trouble free life.
unique designthe apd unique hammerhead design makes use of the whole tank, allowing you to meet consent requirements with the smallest possible tank and installation costs. stormlite® tanks have a 25 year design life and come with a 10 year guarantee*.
easy installationinstallation is a breeze with stormlite® tanks because they are lightweight and robust, and are supplied complete in one piece with a built-in man way access riser and silt trap, ready to install. the built-in silt trap eliminates the cost associated with installation of a separate silt trap and the need for a larger tank by allowing 100% capacity of the tank volume to be utilised.
easy maintenancethe man way access riser is 600mm diameter and is positioned directly over the silt trap for ease of maintenance. internal adjustable extension risers or external extension risers are also available if required.
save time and money!contact apd now for assistance with your storm water tank needs.
lids & coversplastic lids suitable for lawn or garden locations are available. cast iron man way access covers and frames for traffic areas are also available from apd or drainage merchants.
Standard Plastic Lid Cast Iron Cover/Frame
with adjustable riser
Flat Plastic Lid with
adjustable riser
*10 year guarantee subject to apd terms and conditions of trade.
www.apd.co.nz 9
STORMLITE®
Rectangular Rainwater Tanksfor jobs where other tanks just won’t fit!
standard man way position optional man way position silt trap and custom lid
dimensionsstandard height – up to 750mm. width and length to suit.
robust designtanks are designed to bs eN12573 for fabricated tanks and have a 25 year design life. internally baffled for added strength and support.
options(See below for examples)
choice of lid types to suit installation.
optional addition of silt traps.
optional positioning of man way access and risers if required.
1 2 3
optioNs
Made To Orderapd is a plastic fabricator and specialises in made to order tanks and fittings
Ground anchors and anti-buoyancy pads fitted to StormLite® tanks
the additional surface area of the
ground anchors or pads assists in
counteracting tank buoyancy in high
water table areas.
matched pair of tanks with 250mm
diameter inlet and tank joining
spigots. pre-cut 150mm diameter
overflow and outlet holes.
tank with 225mm diameter inlet
at back end of tank.
tank with welded extension to
man way access riser, welded
160mm diameter overflow and
250mm outlet spigot.
Here are some examples of StormLite® tanks that have been specifically made to customers requirements.
Call APD to discuss your specific tank requirements!
Standard DnP Controller iP67 suitable for individual households
• manually start/stop pump
• alarm feedback system
• overload protection
Commercial DnP Controller suitable for sites with multiple tanks
• all standard controller features plus
• review status of multiple pumps on one site Frequency and duration of tank uses
• control pump output Allowing for times of higher and lower usage
Council Sewer System
Did you know ...the distance and height you are from the main council system will determine which pump type and size is best for you? we use the highest quality suppliers so you can have peace of mind knowing your system is going to last.
www.apd.co.nz 11
DnP Sewage Pumping StationNeed a solution that connects you to the council sewer system? enjoy peace of mind knowing your waste water and sewage is being taken care of by our tough, ultra reliable pumping station.
robust solid designbased on our time proven underground detention tank designs, this robust tank has been designed using fea analysis to comply with armacorp 15 requirements for underground septic tanks. the tank has a large capacity which reduces pump cycling & wear providing a much greater buffer in the case of power failures or other issues. our custom design allows the maximum output of waste from the tank.
easy installation with dnp there is no need to worry about your tank rising out of the ground in soggy conditions thanks to the dnp anti buoyancy foot that comes as standard with each tank. our unique design eliminates the costly need for setting in concrete. a financially and environmentally friendlier solution.
commercial applications available looking for something a little different? we offer large volume options too. our tanks can be built to any size and by installing our commercial controllers you can stay in control of your building’s needs. if you are building a kindergarten, office space or large community building we have the ideal solution for your needs.
flexible options, straightforward maintenancethe type of tank we use allows flexible installation options meaning you can choose the pump and controller to best suit your needs. internal components are easy to remove including pump, level sensing systems & motor controls adding up to one of the easiest to service & maintain units on the market.
freeing you up to get back to focusing on what matters —enjoying your home.
get the most out of your outdoor space the tank lid is all that can be seen above ground so there are no ugly landmarks & you can use more of your garden area. at the same time the tanks are protected from damage from the elements.
Out of sight & built to suit your specific household
needs. Our pumping station’s unique design safely
removes waste water & when maintenance does
have to happen it couldn’t be more straight forward.
Did you know...Depending on the size of the building you will need different sizes of tanks? we supply in 2-5 days from order with all parts supplied so you can choose the size to best suit your needs without compromising on cost or timeframe.
www.apd.co.nz
