Finish • All exposed metAl pArts pretreAted with A phosphAte bonding process And post-pAinted with An electrostAticAlly Applied high temperAture bAked white enAmel for superior quAlity And durAbility.
Construction • die-formed code gAuge cold rolled steel housing for strength And uniformity. knockouts on
housing top And ends for mounting And electricAl connections.
• steel/Aluminum sourced from usA origin. • mAte-n-loc (mnl) optionAl quick-connect wiring
system for continuous row instAllAtion. • frosted Acrylic snAp-on lens.
• All purpose, heAvy-duty chAnnel fixture with shielded lens. dependAble, economicAl lighting for industriAl, retAil, cove And displAy ApplicAtions.
• cAn be surfAce cAble, chAin or pendAnt mounted individuAlly or in continuous rows. (joiner plAte included)
• continuous row - mAx. run per circuit is 81 feet.
ApplicAtion CNLED-FAFCNLED-FAR
Lensed Led narrow ChanneL
singLe Led row
Series
lumens with
“fAf” lens
lumens with
“fAr” lens kelvin fixCNLED 18L
27L
22L31L37L40L54L
46L62L69L75L92L97L
109L
21L31L
23L24L33L35L40L46L57L62L
48L52L71L79L80L86L
103L105L115L124L
27k,3k,
35k,4k,5k
24
48
9496
** lumens:“see performAnce chArt on bAck pAge”
kelvin:27k = 2,700 kelvin (3% less lumens thAn 3k)3k = 3,000 kelvin35k = 3,500 kelvin4k = 4,000 kelvin5k = 5,000 kelvin
fixture length:24 - 24” overAll length48 - 48” overAll length94 - 94” overAll length (recommended for continuous row mounting to minimize dArk AreA between fixtures)96 - 96” overAll length
voltAge:1 - 120v4 - 277v5 - 347v9 - 120-277 universAl voltAge
lens:fAf = frosted Acrylic flAt lensfAr = frosted Acrylic rounded lens
Accessories: (see pAge 4 for cAble kits And wire guArds)
options:em1 - 500 - 700 lumen bAttery pAck (not AvAilAble on 2’ unit)em2 - 1100 - 1400 lumen bAttery pAck (not AvAilAble on 2’ unit)em1st - 500-700 lumen bAttery pAck with self-test feAture(not AvAilAble on 2’ unit)em2st - 1100–1400 lumen bAttery pAck with self-test feAture (not AvAilAble on 2’ unit)lde1 - lutron hi-lume 1% ecosystem with soft-on, fAde-to-blAcklde5 - lutron 5% ecosystem dimminggtd - generAtor trAnsfer device (must specify voltAge), (not AvAilAble on 2’ unit)sdim - step dimming. (consult fActory for lumen pAckAge options)dl - dAmp locAtion90 - 90 cri (see 90 cri performAnce chArts for delivered lumens)
mAte-n-loc Quick wiring connector for continuous row:mnl1 - one circuit And em (blAck,white,green And red wires)mnld1 - one circuit And em with 0-10v (blAck, white, green, red, purple, And grAy wires)
motion sensors:msl - 120/277 line voltAge, pir low bAy lens (8’-15’), on/off. (14f/-10c to 160f/71c)msllt - 120/277 line voltAge, pir low bAy lens (8’-15’), on/off. (-40f/-40c to 160f/71c)msldo - 120/277 line voltAge, pir low bAy lens (8’-15’), 0-10v dim to off (fActory configured). (14f/-10c to 160f/71c)msldolt - 120/277 line voltAge, pir low bAy lens (8’-15’), 0-10v dim to off (fActory configured). (-40f/-40c to 160f/71c)imsvod - integrAted lutron vive sensor (occupAncy & dAylight)ivrf - integrAted lutron vive control device (rf only) (contAct fActory for other motion sensor options)
ORDERING GUIDE exAmple: cnled37l4k48-9fAf
Job______________________________________________
Type_____________________________________________
CAtAlog #
LUMAX INDUSTRIES, INC. 301 Chestnut AvenueAltoona, PA 16603-0991 814-944-2537 Fax 814-944-6413
www.lumaxlighting.com
listed • l80 At 66,000 hours• l70 projected At 104,000 hours• suitAble for dry locAtions. (dAmp optionAl)• i.b.e.w. lAbeled.• 5 yeAr limited wArrAnty on led boArds And drivers.• mAximum Ambient temperAtures to 55°c.• 0-10v dimming stAndArd to 1%• lumen/wAttAge tuning AvAilAble.(contact factory for options)• driver quick disconnect stAndArd where required by code. • >82 cri stAndArd. 90 cri optionAl. • certAin versions dlc quAlified. (check www.designlights.org for list of specific qualified configurations under the “qualified products list” tab.)
ElectricAl
perforMance charts
far LENS - ROUND
faf LENS - FLAT LENS>82 CRI
>82 CRI
perforMance charts faf LENS - FLAT LENS
far LENS - ROUND 90 CRI
90 CRI
photoMetric data cAtAlog number: cnleD37l4k48-9fAf
cAtAlog number: cnleD40l4k48-9fAr
LUMAX LIGHTINGCNLEDFAF/FAR 1/8/21
DIMENSIONS specificAtions And dimensionAl dAtA subject to chAnge without notice.
cable kit and wireguard data
loop cABle kits with gripper• 60836 – 50” cAble kit (loop over structure top side & 3/8” threAded gripper on fixture side) power feed not included• 60837 – 72” cAble kit (loop over structure top side & 3/8” threAded gripper on fixture side) power feed not included• 60838 – 100” cAble kit (loop over structure top side & 3/8” threAded gripper on fixture side) power feed not included
5” cAnopY AnD t-BAr cABle kits• 60839 – 50” cAble kit (5” cAnopy And t-grid clip on top side & 3/8” threAded gripper on fixture side) power feed not included• 60840 – 72” cAble kit (5” cAnopy And t-grid clip on top side & 3/8” threAded gripper on fixture side) power feed not included• 60841 – 100” cAble kit (5” cAnopy And t-grid clip on top side & 3/8” threAded gripper on fixture side) power feed not included
5” cAnopY feeD cABle kits• 46901 – 50” cAble kit (5” cAnopy on top side & 3/8” threAded gripper on fixture side) 18/3 power feed • 52700 – 72” cAble kit (5” cAnopy on top side & 3/8” threAded gripper on fixture side) 18/3 power feed• 52090 – 100” cAble kit (5” cAnopy on top side & 3/8” threAded gripper on fixture side) 18/3 power feed• 60845 – 50” cAble kit (5” cAnopy on top side & 3/8” threAded gripper on fixture side) 18/5 - 0-10v dimming power feed • 60846 – 72” cAble kit (5” cAnopy on top side & 3/8” threAded gripper on fixture side) 18/5 - 0-10v dimming power feed • 60847 – 100” cAble kit (5” cAnopy on top side & 3/8” threAded gripper on fixture side) 18/5 - 0-10v dimming power feed • 52092 - drop ceiling junction box
wire guArDsfAf• 61457 - 24”• 61458 - 1 per 47” fixture, 2 per 94” fixture• 61014 - 1 per 48” fixture, 2 per 96” fixture
fAr• 61459 - 24”• 61460 - 1 per 47” fixture, 2 per 94” fixture• 61015 - 1 per 48” fixture, 2 per 96” fixture
loop cABle kits with single pADDle• 61766 - 50” cAble kit (loop over structure top side with pAddle on fixture side) power feed not included• 61767-72” cAble kit (loop over structure top side with pAddle on fixture side) power feed not included• 61768-120” cAble kit (loop over structure top side with pAddle on fixture side) power feed not included
chAin hAng kits with “s” hook• sA3006 - 50” #12 chAin kits with two “s” hooks per chAin• sA3007 - 72” #12 chAin kits with two “s” hooks per chAin• sA3008 - 100” #12 chAin kits with two “s” hooks per chAin