of Protecting Professionalsthrough Innovative Lighting

The Razor was designed for the most demanding needs in mind. It is constructed from a durable polypropylene that can withstand the most abusive environments. The Razor has an ergonomically designed push button switch for easy accessibility and tactical knurled design for maximum grip and comfort in the hand. The super tough body is designed to withstand the most abusive environments. Intrinsically Safe UL Protection Methods Class I Division I and

Lumen Info: Maximum LED brightness at 100 lumens with the highest

TRUSTED BY THE FOLLOWING PROFESSIONS: Designed to meet the needs of all that demand the safest light of the

100O u t s h i n e s at

l u m e n s

Focused optic with high output LED

Ergonomic push button switch

Knurled design allows for maximum grip & total control

Watertight seal

Chemical resistant

Static dissipative

Optional HolsterPART # 27425 DIMENSIONS: 7.125” X 1.75” X 2”

WEIGHT: 7 oz. COLOR: BLACK, SAFETY ORANGE, HI-VIS GREEN

UL Protection methodsUL913 CSA C22.2 NO 157Intrinsically SafeClass I, Div I, Groups A - DClass I, Div II, Groups A - DClass II, Div I, Groups E - GClass II, Div II, Groups F, GClass III, T3

ATEX / IECEx Protection Methods:Zone 0 1725

Baseefa 13 ATEX 00256 IECEx BAS 13.0138 Ex ia II c T3 Ga II 1 GD Ex ia IIIB T195*c DA

a c c e s s o r i e s

F l 1 s ta n d a r d s

IMPACT BEAM PEAK BEAM RESISTANCE DISTANCE INTENSITY

OUTPUT WATERPROOF RUN TIME

100LUMENS 1 M 26 H

1 M170 M

7,000 CD

F e at u r e s s a f e t y

3 AA-cell batteries (not included)

Black Model # 60100 UL Version/ 60105 ATEX Version

Hi-Vis Green Model# 60101 UL Version / 60106 ATEX Version

Safety Orange Model # 60102 UL Version / 60107 ATEX Version

6 7FLASHLIGHT.COM 7

#07612 4 Cell Yellow Lantern w/ 120V AC Charger#07632 4 Cell Yellow Lantern w/ DC Charger#07652 4 Cell Yellow Lantern w/ 220V AC Charger#07672 4 CELL, YELLOW, DIRECT WIRE#07612 UTIL 4 CELL, YELLOW 120V & DC#07610 4 Cell Orange Lantern w/ 120V AC Charger#07630 4 Cell Orange Lantern w/ DC Charger#07650 4 Cell Orange Lantern w/ 220V AC Charger#07670 4 CELL, ORANGE, DIRECT WIRE#07610 UTIL 4 CELL, ORANGE 120V & DC#07611 4 Cell Black Lantern w/ 120V AC Charger#07631 4 Cell Black Lantern w/ DC Charger#07651 4 Cell Black Lantern w/ 220V AC Charger#07671 4 CELL, BLACK, DIRECT WIRE#07611 UTIL 4 CELL, BLACK 120V & DC

10 FLASHLIGHT.COM 11

Multi-Function switch Main light with high / low mode Rear signaling light Steady on / flashing modes

Battery Charge Indicator: Red for charging / Green for fully charged

Low Battery Indicator: When 30 minutes of run time remain,high mode automatically switches to low mode and the front beam will begin to flash 3 times every 5 minutes.

F e at u r e s

M O D E L S

# 07690 Lighthawk Gen II Charger Base# 07870 Lighthawk 12/24V DC Cord# 20628 Lighthawk 120V AC Cord# 20629 Lighthawk 220V Euro Cord# 20627 Lighthawk 240V British Cord

a c c e s s o r i e s

225LUMENS 1M 8H / 16H

1M447 M

70,000 CD

F l 1 s ta n d a r d s4-Cell Lighthawk

LED GEN II

SAFETY CERTIFICATIONSS A F E T Y

UL Protection MethodsUL 913 CSA 22.2 NO 157Intrinsically Safe

Class I, II, III Div I Groups C-G, T1Class I, II, III Div II Groups A-G, T5Ingress Protection Level: IP67

510201-N : Lithium Ion Replacement Battery Pack510220 : Charger Base Only510202 : Alkaline Battery Tray510180 : 12/24V DC Charger Cord510181 : 120V AC Charger Cord510182 : Euro/Int’l AC Charger Cord

The Right Angle LED offers optimal brightness, safety, and weight. The alkaline model can be used as a rechargeable with the addition of a lithium ion battery pack, charging base and cord.The low profile R/A LED also offers a smoke cutting beam with intrinsically safe certifications.

OPTIC TECHNOLOGY: Bright Star utilizes the latest optic technology to maximize light output with 200 Lumens. The RA’s optic distributes light into a custom beam pattern that pierces smoke and dust with 35,000 CD. Additionally, the optics enable the RA body to maintain a slim profile and keep the light focused in the proper direction at all times. This slim profile also keeps the light tight against the body preventing entanglement in air packs.

200 Lumens and f o r c u t t i n g t h r o u g h t h e t h i c k e s t d a r k e s t s m o k e c o n d i t i o n s

MODEL # 510304

35,000 Candelas

ALKALINE

Extremely durable

Oversized push button switch for gloved hands

Stainless steel clip

Smoke cutting beam with advanced optic technology from its wide eyelens

6AA-Cell Alkaline (batteries not included)

Super-tough nylon construction

Same light used in both alkaline and rechargeable models

DIMENSIONS: 7.2” X 3.2” X 1.8”WEIGHT: 15 oz. (with batteries)COLOR: SAFETY ORANGE

UL Protection methods

UL913 CSA C22.2 NO 157Intrinsically safeClass I, II, III, Div I Groups A - GClass I, II, III, Div II Groups A - GOperating Temp Code T3

F l 1 s ta n d a r d s

IMPACT BEAM PEAK BEAM RESISTANCE DISTANCE INTENSITY

OUTPUT WATERPROOF RUN TIME

200 LUMENS 1 M 15 H

1 M374 M

35,000 CD

F e at u r e s

s a f e t y

a c c e s s o r i e s

# 510304 6 AA-cell batteries (not included)

14 FLASHLIGHT.COM 15

FLASHLIGHT.COM 17

Once again Bright Star brings out a first of its kind in technology with the release of the Right Angle LED with Lithium Ion Rechargeable Battery Technology!

Bright Star’s proven Lithium Ion technology has now been released in the new RA LED, giving the user the best in battery realiability and reducing the overall weight of the light. No more maintenance on your rechargeable battery and any concerns with the run time or life span of the battery. Finally a dependable rechargeable battery in a Right Angle light with a beam distance of 374 meters and 200 Lumens!

Rechargeable Battery Pack: First Lithium Ion Rechargeable on the market that is extremely lightweight and compact for close placement near the body.

A b e a m d i s ta n c e o f

and

200 lumens

with Lithium Ion Technology

Lightweight Li-Ion rechargeable battery pack, included (Maintenance Free)

Oversized push button switch

Smart Charger • Micro-controlled which allows for maximum run time • Single Hand Operation • NFPA 1901-14.1.11.2 (2009) certified mounted in any direction

Charge indicator

Stainless steel clip

Optional – Alkaline tray available allowing use with 6 AA-cells

510201-N : Lithium Ion Replacement Battery Pack510220 : Charger Base Only510202 : Alkaline Battery Tray510180 : 12/24V DC Charger Cord510181 : 120V AC Charger Cord510182 : Euro/Int’l AC Charger Cord

DIMENSIONS: 7.2” X 3.2” X 1.8”WEIGHT: 11 oz. with LI-ION BatteryCOLOR: SAFETY ORANGE

UL Protection methods

UL913 CSA C22.2 NO 157Intrinsically safeClass I, II, III, Div I Groups C - GClass I, II, III, Div II Groups C - GOperating Temp Code T3

F e at u r e s

s a f e t y

F l 1 s ta n d a r d s

IMPACT BEAM PEAK BEAM RESISTANCE DISTANCE INTENSITY

OUTPUT WATERPROOF RUN TIME

200 LUMENS 1 M 4 H

1 M374 M

35,000 CD

a c c e s s o r i e s

# 510221 #510318 #510242

A s m o k e c u t t i n g b e a m o f 374 m

Model # 510221 w/ 120V AC charger

Model # 510318 w/ direct wire charger

Model # 510242 w/ Euro/Int’l charger

Model # 510221 UTIL w/ 120V AC & 12/24V DC chargers

16

The WorkSAFE LED series was developed using a proven product platform and integrating the highest LED technology. The LED technology significantly increased light output and run-time.

INTRINSICALLY SAFE: The intrinsically safe certification on these lights gives you the absolute confidence to use our lights in the most hazardous environments withoutconcern of any safety issues.

#2224 LED PART #15720

#2217 LEDPART #15460

#2206 LEDPART #08050

The WorkSafe LEDTM series offer the highest global safety approvals at the most affordable price.

flashlightsaccept optional wands

seriesIntrinsically Safe

UL Protection Methods:Class I, II, III, Div I, Groups A - GClass I, II, III, Div 2, Groups A - GOperating Temp T5

Faceted Reflector

Anti-roll tube

CHEMICAL RESISTANT

Non-slip grip

F l 1 s ta n d a r d s 2206 LED

IMPACT BEAM PEAK BEAM RESISTANCE DISTANCE INTENSITY

OUTPUT WATERPROOF RUN TIME

90 LUMENS 1 M 150 H

1 M314 M

24,650 CD

IMPACT BEAM PEAK BEAM RESISTANCE DISTANCE INTENSITY

OUTPUT WATERPROOF RUN TIME

50 LUMENS 1 M 200 H

1 M88 M

1,946 CD

F l 1 s ta n d a r d s 2217 LED

F l 1 s ta n d a r d s 2224 LED

IMPACT BEAM PEAK BEAM RESISTANCE DISTANCE INTENSITY

OUTPUT WATERPROOF RUN TIME

50 LUMENS 1 M 250 H

1 M88 M

1,930 CD

4 D-cell batteries (not included)Battery tray included

2 D-cell batteries (not included)

3 D-cell batteries (not included)

Waterproof

Switch guard protects switch on impact

3 Way Switch for signaling capability for Marine applications

S Biner Clip included for Belt attachment on 2217 and 2224 models

Crush-Resistant Case

Polycarbonate Lens

F e at u r e s & S a f e t y

18 FLASHLIGHT.COM 19

S-Biner included

S-Biner included

BODYThe EX90L body is constructed using an automotive resin type ABS747 making the light highly durable for use in mining,on oil rigs and in industries where there could be flammable gas or another potentially explosive atmosphere. Shock absorbing rubber on both the base and lid provides added protection, and the inbuilt extension height-adjustable extension arms make this light suitable for all tasks.

BATTERYThe battery used in EXIN Light Explosion Proof Models is a purpose-built encapsulated Ni-MH battery. It does not need water or service and is only to be charged in accordance with the instructions provided.

SPECIFICATIONSModel T4 IIB 720 DS T4 IIB 1440 SS T4 IIC 720 SSWeight 8kg 8kg 7.8kgOpen Height (mm) 880mmClosed Height (mm) 570mmWidth (mm) 330mmDepth (mm) 200mmVoltage AC 110 or 240VAC to 12VDC max 2ABattery 9.6 Ni-MH Battery Pack (containing 8 cells sealed) Exin EX96BLight Type High Intensity LED

Lumens 720 each side720 low (one side)

1440 high (one side)720 one side

Ingress Protection IP65Rated Ambient Temp (-20ºC ≤ Tamb ≤ +40ºC)Charge Time Hours 7-8

Battery Run Time Hours10-12 one side

5-6 using both sides5-6 on high

10-12 on low10-12

Models: EX90L T4 IIB 720 DS • EX90L T4 IIB 1440 SS • EX90L T4 IIC 720 SS

Certifications: IECEx Certificate No: IECEx TSA 15.0025X • ATEX Certificate No: ITS16ATEX28430X

EXIN Light Explosion Proof Products carry T4 Classification and have been approved and certified by the relevant authorities: TestSafe Australia for the IECEx Certificate and Intertek UK for the ATEX Certification.

These certifications provide evidence that the EXIN Lights are suitable for areas where flammable gases and combustible dusts are present, providing your requirement is within the certified classification of our three models.

EXPLOSION PROOF LIGHTINGEX - Range of Portable Lighting

Australian Made & Designed.

Ex & Industrial Lighting www.exinlight.com

Distributed by:

EXIN LIGHTATTACHMENTS

STABILISING PLATE MODEL SI-SP1

POLE ATTACHMENT MODEL SI-PA1

The Pole Attachment is designed to fit the uniquely designed Base of the IN Series EXIN Light.

By simply sliding the Pole Attachment Plate through the Base of the EXIN Light and fastening

accordingly. The Pole Attachment can then be attached to a Light Pole or similar shaped objects.With

the convenience of its 1.5 metre Ratchet Strap, the Pole Attachment can be adjusted to fit various size

objects giving you a much broader range of use.

The Stabilising Plate is a Metal Plate measuring 60cm long which slides through the Base of the IN

Series EXIN Light, great for when those strong weather conditions pick up, with the added feature

of pre drilled holes at either end of the Stabilising Plate designed to fit a Lock and Chain for added

security, or to peg the Stabilising Plate into the ground when those unforeseen weather conditions

arise.

AT

TA

CH

ME

NT

TRIPOD MODEL SI-TP1

SCAFFOLD ATTACHMENT MODEL SI-SA1

With its 7cm opening the EXIN Light Scaffold Attachment is designed to Site.

P28 P29

The New and improved EXIN Light Tripod is designed to have the Portable ‘EXIN

Light’ attached to a Base Plate and then screwed onto the top of the Tripod Frame.

With new manufacturing techniques the EXIN Light Tripod is suitable for indoor and

outdoor use, creating an even wider range of use.

The heavy duty construction of the Tripod allows standing 1100mm in height and

weighs only 3.2kgs(without its Base Plate), With the Legs made from 6063 Aluminium

and Head and Tips made from Aluminium Alloy.