Offshore Cable

8/10/2019 Offshore Cable

1/96

OFFSHORE

CABLES


2/96


3/96

FOREWORD

ONE OF THE WORLDS BIGGEST COMPANIES IN THE SECTOR.

General Cable Corporation is one of the worlds leading cable manufacturing companies. In its work it has

contributed decisively to progress and improvements in peoples quality of life.

Through innovation and technology General Cable is present in the development and evolution of society. Withmore than 13,000 associates operating in 26 countries and 57 manufacturing facilities, General Cable is a global

leader in the supply of products and services to the global oil, gas and petrochemical industry.

The company has a hundred-year tradition and its own values based on customer satisfaction, integrity in all

it does, teamwork, delivery speed, creativity and innovation, and ongoing improvement, in which people are its

main source of value.

This is General Cable, a company with a commitment to the future, to innovation, and to sustainability. It is a

company prepared to meet its commitment to society and the environment.


4/96


5/96

INDEX

06

19

08

24

Symbols

Technical information

Introduction

Selection guide

General Cable reserves the right to alter or modify specifications and materials in the light of later technical development.

27

72

Cables for offshore installations

Installation guide

OFFSHORE CABLES


6/96

SYMBOLS

FLAME RETARDANT SINGLE WIRE - IEC 60332-1-2

FLAME RETARDANT BUNCHED WIRES - IEC 60332-3-22, cat. A

FIRE RESISTANT - IEC 60331

LOW SMOKE EMISSION - IEC 61034-2

HALOGEN FREE - IEC 60754-1

LOW ACIDITY AND CORROSIVITY OF EVOLVED GASES - IEC 60754-2

INCREASED FLEXIBILITY

MECHANICAL RESISTANCE

HEAVY DUTY6


7/96

MINERAL OIL RESISTANCE

HYDROCARBON RESISTANCE

ELECTRO-MAGNETIC INTERFERENCE PROTECTION

MUD OIL RESISTANCE

WORK AT VERY LOW TEMPERATURE -40 C

WEATHERING TEST RESISTANT

REDUCED BENDING RADIUS

WATERTIGHT

7


8/96

INTRODUCTION

8

OFFSHORE CABLES

TECHNICAL SPECIFITATION

In this catalogue General Cable presents its series of shipboard energy, control and instrumentation cables for

fixed installations on vessels and oil rigs.

The safety of people and equipment is a priority consideration in the design and construction of Exzhellent-606

and Genfire-606 cables. They are made from zero-halogen compounds with a low-acidity and -corrosivity of

gases evolved and a low opacity of fumes evolved during combustion, in accordance with the corresponding IEC

standards. They therefore allow for quick, safe evacuation in the event of fire.

The cables are designed to comply with the strictest non-fire propagation standards and prevent the generation

of secondary seats of fire even in circumstances of high cable concentration in unfavourable conditions.

There are also fire-resistant designs that feature not only the above properties, but are also able to continue

providing service even when directly affected by fire. Their use in safety services enables the services to continue

working even in situations of fire.

Reinforced cables feature standard tinned copper braiding that provides good mechanical protection and may

also be used in specific applications such as shielding.

Exzhellent-606 and Genfire-606 cables may be used in extreme climates, principally because of their resistance

to very low temperatures.

This catalogue also includes specific designs for energy cables used in circuits with variable frequency drives

(VFD).

The cables described in this catalogue have been designed in accordance with the following standards and

specifications.

8

NEK TS 606

Cables for off-shore installation - Halogen-free and/or mud resistant - Technical specification.

IEC 60092-350

Electrical installations in ships.

IEC 60092-352

Choice and installation of electrical cables.


9/96

99

IEC 60092-353

Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and

3 kV.

IEC 60092-354

Single and three-core power cables with extruded solid insulation for rated voltafes 6 kV up to 30 kV.

IEC 60092-376

Cables for control and instrumentation circuits 150/250 V.

IEC 60092-351

Insulation materials for shipboard and offshore units, power, control, instrumantarion, telecommunication and

data cables.

IEC 60092-359

Sheathing materials for shipboard power and telecommunication cables.

IEC 60228

Conductors of insulated cables.

IEC 60332-3-22 cat. A

Tests on bunched electric cables under fire conditions, fire retardant.

IEC 60331-21Circuit integrity - Procedures and requirements for cables up to and including 0,6/1 kV.

IEC 60331-1

Circuit integrity - Test method for a temperature of at least 830 C for cables rated up to 0,6/1 kV and with an

overall diameter exceeding 20 mm.

IEC 60331-2

Circuit integrity - Test method for a temperature of at least 830 C for cables rated up to 0,6/1 kV and with an

overall diameter not exceeding 20 mm.

IEC 60754-1

Determination of the amount of halogen acid gas .


10/96

10

Cables shown in this cataloge are covered with Type Approvals from main classification societies:

ABS BUREAU VERITAS GERMANISCHER LLOYD

DET NORSKE VERITASLLOYDS REGISTER

10

IEC 60754-2

Determination of degree of acidity of gases.

IEC 61034-2

Measurement of smoke density.


11/96

1111

APLICATIONS

Depending on their use, the cables are distributed into the following groups:

LOW VOLTAGE POWER CABLES (NEK TS 606)

Power cables suitable for operation at up to and including 0.6/1 kV.

Constructions up to and including 4 core. Coloured core identification.

Non armoured and armoured with tinned copper wire braid.

Available designs with mud resistance and/or fire resistance (circuit integrity).

Available designs for variable frequency drives (VFD).

MEDIUM VOLTAGE CABLES (NEK TS 606)

Cables for distribution of energy in voltages of 3,6/6 to 12/20 kV.

Armoured with tinned copper wire braid.

Available designs with mud resistance.

CONTROL CABLES (NEK TS 606)

Available from 2 to 37 cores. Identification by numbering.

Armoured with tinned copper wire braid.

Available designs with mud resistance and/or fire resistance (circuit integrity).

INTRUMENTATION CABLES (NEK TS 606)

Multiunit (pairs or triple core).

Cores identified by colours and numbered tape in each unit.

Two pair cable without individual screen has a star/quad composition. Individual and/or collective screening of units using Cu / Poliester tape and drain wire.

Cable screening using tinned copper wire braid.

CONSTRUCTION

On the basis of the above-mentioned IEC standards, and reviewing the formation of the cables, we have:

Conductor

Tinned annealed copper in accordance with IEC 60092-350:

Class 2: Rigid conductors with 7 wire formation (in small sections) or concentric layers in big cross sections.

Class 5: Flexible conductors bunched or multibunched configurations.

In general those class 2 are used, but the use of class 5 is growing, due to their handeability and therefore their

greater ease of installation.


12/96

1212

Tin plated conductor is used to offer greater protection of conections against oxidation in heavy marine

environments.

See the following tables for standarized sections and compositions to be used:

CROSS SECTIONAL AREA

Cable type IEC Standard(kV)Voltage

(mm2)

Area ofconductor

Power Low Voltage1 kV3 kV

1,5 : 300 mm2

10 : 300 mm2

6 kV10 kV15 kV20 kV

10 : 630 mm2

16 : 630 mm2

25 : 630 mm2

35 : 630 mm2

250 V 0,50 : 2,50 60092-376

60092-354

60092-353

Instrumentation

Power MediumVoltage

COMPOSITION NUMBER OF CORES

Cable type IEC StandardNumber of

cores

Power L.V. N (Not specified)

1,2*4,7,10,14,19,24,30,37 pairs

2,4,7,12,19,27,37cores

60092-376

60092-376

60092-354

60092-353

Control cables

Instrumentation

Power M.V. 1 or 3 cores

(*) Two pair cable is a star-quad composition, cores diametrally oposed are used to conform the pairs.


13/96

1313

Insulation materials

NEK TS 606specifies insulation materials making reference to standard IEC 60092-351. The ones used in the

current catalog are:

EPR (Ethylene propylene). A thermosetting elastomer, it has an almost nil distortion due to the action of heat. It

gives the cable greater flexibility. Especially suitable if the sheath has to be a crosslinked compound.

HEPR (Hard grade etylene propylene).Improved EPR compound bringing beter performance both in mechanical

o electrical properties. This brings to a thickness insulations similars to the XLPE ones.

INSULATION MATERIALS

T ype of insulating compound Short-circuitAbbreviateddesignation NormalOperation

Maximum rated conductor Temperature C

Elastomeric or thermoset

EPR

HEPR

90 250

90 250

Ethylene-propylene rubber or similar(EPM o EPDM) Halogen free

High modulus of hard grade halogen freeethylene propylene rubber

Sheating materials

The sheath of the cables protects the set of cores from the mechanical or environmental aggressions they can

suffer. Mechanical aggressions are mainly abrasions from the dragging of the cables and tears at angles of the

tubes and occur during the installation, while the environment aggressions (heat, presence of oils or aggressive

agents) will affect the cable throughout its working life.

Halogen free termosetting compound SHF 2.

It has the advantages of being a heat-stable compound which does not release toxic gases or opaques smoke

in case of fire (see annex 2), and it has good resistance to oils, fuel and solvents. Good resistance to mechanical

demands.


14/96

1414

Type of sheathing compound Abbreviated designation

Elastomeric or thermoset

SHF 2

SHF Mud

Ethylene-propylene rubber or similar(EPM o EPDM) Halogen free

High modulus of hard grade halogen freeethylene propylene rubber

ArmouringThe armour gives the cable mechanical protection. The copper in tinplated version being used in this case.

The use of tinned copper in the armour performs a dual function as it behaves as armour but also as a screen.

Type Materials

BRAID Tinned annealed copper

Screening

In low tensin cables, the screens are the elements which provide the cable protection against electromagnetic

fields. This is an element especially suitable for cables for instrumentation, control and transmission of signals

thanks to its sensitivity to radiation which can distort the signal transmitted by the cable. To protect the cablefrom radiation it is necessary to screen the group of conductors (protection from external disturbance) or each

one of the pairs or triples (electromagnetic fields from other elements of the same cable).

According to the standard, screens can be either braid or laminated polyester tape.

In all designs of 2, 3 and 4 cores, the screen cross-section has been defined according to the criteria set in

standard IEC 60092-352 Table 2, so it can be used as an earthing conductor.

In armoured type cables, the use of tinned copper wire braid armour, when properly earthed, allows to use it as

a collective screen.Type Materials

BRAID

TAPE

Tinned annealed copper

Cu / Polyester

Halogen-free mud-resistant crosslinked compound SHF Mud.

The same characteristics as per material type SHF 2 adding mud resistance according to NEK TS 606.


15/96

1515

Electromagnetic compatibility (EMC)

When General Cable products are installed in accordance with IEC 60533, they fulfil the requirements for

Electro-Magnetic Compatibility.

To establish how cables perform in the event of fire, a series of standards have been developed to define fire

conditions and measure the cables performance in a similar situation to that of the installation. It should

nonetheless be remembered that these tests establish fixed, reproducible conditions used to appraise the

performance of the cables in this situation. Current IEC standards envisage the following events:

Flame retardant (IEC 60332-1-2)

A 1 kW flame in contact with the cable sheath for a time established in

the standard should not spread. The cable will not therefore prompt a fire

caused by a minor incident or by an external heat source with which it

comes into accidental contact.

Flame retardant (IEC 60332-3-22)

A fire unconnected with the cable may affect a wiring system and

become more serious if the system is oriented vertically, thus

allowing the circulation of air and the creation of a chimney effect. If

the decomposition temperature of the organic materials is reached,

exothermic combustion of the cables occurs and the fire spreads. The

insulation compounds used in Exzhellent-606 y Genfire-606 cable

sheaths are designed to hinder exothermic reaction. To simulate thissituation, the test involves the application of powered air and a 20-kW

gas burner to a bundle of cables arranged to simulate a vertical wiring

system. In these conditions, a fire in the cables prolonged for 40 must

go out in the time established in the standard and must not exceed a

length of 2.5 metres. The prescribed standard applicable in the ship

industry is IEC 60332, part. 3-22, cat A. Category A prescribes the

maximum volume of inflammable material (seven litres per metre).

Fire resistance (IEC 60331)

IEC 60331 defines the test conditions applied to a cable that must remain

in service in safety circuits even when directly affected by a fire and when

its organic parts are decomposing.

IEC 60332-1

FIRE PERFORMANCE OF CABLES


16/96

1616

In the test, the cable is subject to the action of a burner at a minimum

flame temperature of 750 C (standard IEC 60331-21) or of 830 C (for

cables with an overall diameter of over 20 mm in IEC 60331-1 and forcables with an overall diameter not exceeding 20 mm in IEC 60331-2) for

a period of 90 minutes, during and at the end of which the cable must

remain in service.

Halogen-free and low smoke emission cables

Cables subject to fire, depending on the materials of which they are

made, may give off gases that are toxic for peoples health or corrosive

and therefore hinder the proper operation and preservation of the

electronic and IT components in the vicinity. Opaque smoke that prevents

a view of the escape routes from the affected sites may also be given off.

To minimise these effects, General Cable has developed the Exzhellent

series cables that eliminate harmful emissions of halogenated and toxic

gases (IEC 60754-1 and 60754-2), substantially reduce opaque smokes

and thus facilitate the evacuation of people (IEC 61034-2).

IEC 60332-3-22 Cat. A

IEC 60332-3IEC 60331


17/96

1717

IEC 60754-1 IEC 61034

Sheathing material Standards Units

Index oxigen limit ASTM-D-2863 35 36 36

280 290 290

180 >60 200

4,3

ASTM-D-2863

IEC 60754-1

IEC 60754-2

IEC 61034-2

%

%

%

pH

CTemperature index

Halogen content

Corrosivity index

Smoke density (Dm)

Thermoplastic Thermosetting Crosslinked

Halogen Free Halogen Free Halogen FreeMud Resistant

SHEATHING MATERIALS

ANNEX 1


18/96

18

SMOKE EMISSION CHARACTERISTICS

ANNEX 2

0 2

Tiempo (minutos) / Time (minutes)

%T

ransmitancia/%t

ransmittance

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

10

20

30

40

50

60

70

80

90

100

ST2 (PVC)

SE1 (CP)

SHF 1

SHF 2

Unaged Tensile Strenght IEC 60092-359 9,0 9,0 9,0

120 120 120

-25C -40C -40C

7 d. @ 100C 7 d. @ 120C 7 d. @ 120C

n.a.IRM 902

24h @ 100C

IRM 902 24h @ 100CIRM 903 7 d. @ 100C

Calcium Bromide Brine56 d. @ 70C

Carbo Sea 56 d. @ 70C

IEC 60092-359

IEC 60092-359

NEK TS 606

IEC 60811

N/mm2

%Unaged Elongation atBreak

Ageing in air over

Oil Resistance / MUD

Minimum Low Temp.Operation

MATERIAL MECHANICAL CHARACTERISTICS


19/96

19

TECHNICAL INFORMATION

CABLE DESIGNATION

Cable designation is based in the letter code described in the tables below:

Halogen free design

Materials InsulationInner covering / Inner

SheathAdditional

characteristics

Fire resistant tape +insulation B

O

U

VFD

X

R

F

Ethylene PropyleneRubber (EPR)

Inner covering

No armour

Tinned Copper wirebraid

Thermoset compoundSHF 2 or SHF Mud

Unit screening (i) Individual(c) Collective

Variable frequencydrives

Armour /Shield Outer Sheath

The cable designation also includes the number and size of cores (NxS), substituing the symbol x by the

symbol G when an earth core is required. In two, three or four core cables armoured power, the NxS/E

terminology is used to illustrate the cables in wich the copper wire braid armour can be employed as the earth

conductor. In this case, the cross sectional area of the braid (E) is equal or greater than 50% of the phase conductors.

CURRENT CARRYING CAPACITIES

General Cable recommends the utilisation of current ratings according to standard IEC 61892-4 based on

conductor temperature of 90 C and ambient temperature of 45 C. As an alternative, it is possible to use the

current ratings included in the regulations of third-party bodies.

De-rating factors for differing methods of installation, and ambient temperatures are specified in IEC 61892-4.


20/96

20

CABLE OVERALL DIAMETER TOLERANCE

Nominal overalldiameter

(mm) Low voltage power & control

+1,0-0,5 +2,0-1,0< 20

+2,0

+2,5

+3,0

+3,5

+4,0

+5,0

+5,5

-0,5

-0,75

-0,75

-0,75

-1,0

-1,0

-1,0

+2,5

+3,0

+4,0

+4,5

+5,0

+6,0

+6,5

-1,0

-1,5

-1,5

-1,5

-1,5

-1,5

-1,5

20 - 29,9

30 - 39,9

40 - 49,9

50 - 59,9

60 - 69,9

70 - 79,9

> 79,9

High voltage power

Tolerance

(mm)

20

Number of pairs or triples

5 +1,5-1,5

6 - 10

> 104

5 - 8

> 8

+1,5

+2,5+1,5

+2,0

+2,5

-2,0

-2,5-1,5

-1,5

-2,5

Instrumentation

Tolerance(mm)

ParesPairs

TrosTriples

R: minimum bending radius; a lower radius does not guarantee cable integrity as it may have suffered potential

damage that shortens its useful life.

MINIMUM BENDING RADIUS (IEC 60092-352)

R

Cable


21/96

21

MINIMUM BENDING RADIUS (IEC 61892-4)Up to and including 1,8/3 kV

Insulation Covering (D)

Nominal overalldiameter Minimum internal

radius of bend

Thermoplastic orthermosetting

Circular copperconductors

Unarmoured or unbraided

Metal braid screenedor armoured Any

< 25 mm 4 D a

6 D> 25 mm

6 D

Composite polyester/metal tapescreened units or collective tape

screeningAny 8 D

a) 6D for circuit integrity

Higher than 1,8/3 kV

Any 12 DSingle core Any

Any 9 D3 core cable Any

CORE IDENTIFICATIONPower cables up to 1,8/3 kV

Number of cores EarthNeutralPhase

2

3

4

4+E

3+E

2+E


22/96

Instrumentation cables of 150/250 V

Grey sheathIntrinsically safe circuits: Blue sheathTwo pair cables collectively screened are laid up with diametrically opposite cores.

n equals number of each pair or triple

n nPair

n nnTriple

1

2

2

1Two pairs collective

screen

Multi-conductor control cables of 250 V or 0,6/1 kV

n 1 2 3 4 n

n equals the correlative conductor number

Power cables of 3,6/6 kV and aboveNumber of cores

3

22


23/96

23

TECHNICAL DATA FOR OFFSHORE INSTRUMENTATION CABLES

Data @ 1000 Hz

Standard Fire resistant

0,75 0,751,5 1,5 Units

Conductor cross sectional area(mm2)

/km14,127,6 14,127,6Cond. Resistance(DC) 20C

/km14,127,6 14,127,6Cond. Resistance(AC) 20C

mH/km0,6120,635 0,6580,721Inductance

/km14,127,6 14,127,6Impedance

253333 265366Characteristicimpedance

dB/km0,570,75 0,550,68Signal attenuation

nF/km6360 5852Mutual capacitanceaprox.

Electricalproperties

Characteristicproperties

100000100001000100

0.1

2

3

4

5

6

7

8

9

2

3

4

5

6

7

8

910.0

1.0

Attenuation(dB/km)

Frequency (Hz)


24/96

24

SELECTION GUIDE

CABLE SELECTION

Rated voltage Type Armoured Mud resistant Serie Page

0,6/1 kV

3,6/6 kV

6/10 kV

8,7/15 kV

12/20 kV

3,6/6 kV

6/10 kV8,7/15 kV

12/20 kV

250 V

P1 RFOU

P1/P8 RFOU

P18 RU

P2 RFOU

P3 RFOU

P4 RFOU

P19 RFOU

P2/P9 RFOU

P3/P10 RFOUP4/P11 RFOU

P19/P21 RFOU

S1 RFOU(i)

S2 RFOU(c)

S11 RU(i)

S12 RU(c)

S1/S5 RFOU(i)

S2/S6 RFOU(c)

x

x

x

x

x

x

x

xx

x

x

x

x

x

x

x

xx

x

x

x

x

7475 2469

7476 2470

7479

7480

7481

7482

7483

7484

74857486

7487

4271 4281

4272 4282

4267

4268

4273 4283

4274 4284

28

30

32

34

34

34

34

36

3636

36

38

40

42

44

46

48

POWERL.V.

POWERM.V.

INSTRUMENTA-TION


25/96

CIRCUIT INTEGRITY CABLES (IEC 60331) FIRE RESISTANT


0,6/1 kV

250 V

P5 BFOU

P5/P12 BFOU

P17 BU

S3 BFOU(i)

S4 BFOU(c)

S13 BU (i)

S14 BU (c)

S3/S7 BFOU(i)

S4/S8 BFOU(c)

x

x

x

x

x

x

x

x

x

x

x

7473 2473

7474 2474

7478

4275 4285

4276 4286

4269

4270

4277 4287

4278 4288

50

52

54

56

58

60

62

64

66

POWERL.V.

INSTRUMENTA-TION

25

CABLES FOR VARIABLE FREQUENCY DRIVES (VFD)


0,6/1 kV

3,6/6 kV6/10 kV

8,7/15 kV

12/20 kV

18/30 kV

RFOU-VFD

RFOU-VFD

x

xx

x

x

x

x

xx

x

x

x

7490

79417942

7943

7944

7945

68

70

POWERL.V.

POWERM.V.


26/96


27/96

CABLES FOR

OFFSHOREINSTALLATIONS


28/96

EXZHELLENT 606Type P1 RFOU

MAIN USES AND FEATURES Armoured cables for installation in offshore applications with special

performances on flame spread and low emission of smoke and fumes.

Oil resistant.Max. rated conductor temperature in normal operation: 90C.

Minimum working temperature -40 C.

CONSTRUCTION

Tinned copper, stranded class 2.

1. CONDUCTOR

Halogen free compound.

3. INNER COVERING

Tinned copper wire braid.

4. BRAID ARMOUR

Thermoset compound type SHF 2.

IEC 60092-359.

5. OUTER SHEATH

Ethylene Propylene Rubber.

IEC 60092-351.

Core identification: see pages 21 and 22.

2. INSULATION

1

2

3

4

5

28

Rated voltage: 0,6 / 1 kV

Armoured

POWER

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


29/96

(mm2) (kg/km) (mH/km)Nominal cross Weight Inductance

(mm) (mm) (V/A. km)

Diameter underarmour

Overalldiameter

Voltage drop(COS=0.8)

7475206

7475207

7475208

7475306

7475307

7475308

7475309

7475310

7475311

7475312

7475313

7475314

7475315

7475316

7475317

7475318

7475406

7475407

24690562469057

2469076

2469077

2469126

2469127

2469196

2469197

2x1,5

2x2,5

2x4

3x1,5/1,5

3x2,5/2,5

3x4/4

3x6/6

3x10/10

3x16/16

3x25/16

3x35/17,5

3x50/25

3x70/35

3x95/47,5

3x120/60

3x150/75

4x1,5/1,5

4x2,5/2,5

5x1,55x2,5

7x1,5

7x2,5

12x1,5

12x2,5

19x1,5

19x2,5

9,0

10,0

11,0

9,5

10,5

11,5

13,5

15,5

17,5

20,5

23,0

26,5

30,0

34,5

41,0

45,5

10,5

11,5

11,513,0

12,5

14,0

17,0

18,5

20,0

22,0

12,5

13,5

15,0

13,0

14,5

15,5

17,5

19,5

22,0

25,5

28,0

32,0

36,5

41,0

47,5

52,5

14,5

15,5

16,017,0

17,0

18,0

21,5

23,0

24,5

27,0

240

290

385

275

365

440

560

745

1015

1405

1790

2435

3290

4470

5975

7320

350

430

420515

485

595

730

915

990

1260

21,7

13,5

8,41

21,7

13,5

8,41

5,60

3,35

2,14

1,39

1,02

0,779

0,560

0,427

0,353

0,302

21,7

13,5

21,713,5

21,7

13,5

21,7

13,7

21,7

13,5

0,376

0,350

0,328

0,376

0,350

0,328

0,317

0,296

0,281

0,278

0,268

0,264

0,250

0,248

0,231

0,231

0,376

0,350

0,3760,350

0,376

0,350

0,376

0,350

0,376

0,350

Code

29


30/96

EXZHELLENT 606

MAIN USES AND FEATURES

CONSTRUCTION

1

2

3

4

5

Type P1/P8 RFOU

30

Armoured cables for installation in offshore applications with special


Halogen free, oil and mud resistant.Max. rated conductor temperature in normal operation: 90 C.



1. CONDUCTOR


3. INNER COVERING


4. BRAID ARMOUR

Thermoset compound mud resistant type SHF Mud.

NEK TS 606.

5. OUTER SHEATH


IEC 60092-351.


2. INSULATION


MUD RESISTANT

Armoured

POWER

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


31/96


(mm) (mm) (V/A. km)


Overalldiameter


Code

0,384

0,357

0,335

0,384

0,357

0,335

0,324

0,302

0,287

0,284

0,274

0,269

0,255

0,253

0,247

0,244

0,384

0,357

0,3760,350

0,376

0,350

0,376

0,350

0,376

0,350

25,0

15,6

9,71

21,7

13,5

8,41

5,60

3,35

2,14

1,39

1,02

0,779

0,560

0,427

0,353

0,302

21,7

13,5

21,713,5

21,7

13,5

21,7

13,5

21,7

13,5

245

295

385

280

370

445

565

750

1020

1410

1790

2430

3305

4480

5975

7345

350

425

420515

485

595

730

915

990

1260

12,5

13,5

15,0

13,0

14,5

15,5

17,5

19,5

22,0

25,5

28,0

32,0

36,0

41,5

47,5

52,5

14,5

15,5

16,017,0

17,0

18,0

21,5

23,0

24,5

27,0

9,0

10,0

11,0

9,5

10,5

11,5

13,5

15,5

17,5

20,5

23,0

26,5

30,0

35,0

41,0

45,5

10,5

11,5

11,513,0

12,5

14,0

17,0

18,5

20,0

22,0

2x1,5

2x2,5

2x4

3x1,5/1,5

3x2,5/2,5

3x4/4

3x6/6

3x10/10

3x16/16

3x25/16

3x35/17,5

3x50/25

3x70/35

3x95/47,5

3x120/60

3x150/75

4x1,5/1,5

4x2,5/2,5

5x1,55x2,5

7x1,5

7x2,5

12x1,5

12x2,5

19x1,5

19x2,5

7476206

7476207

7476208

7476306

7476307

7476308

7476309

7476310

7476311

7476312

7476313

7476314

7476315

7476316

7476317

7476318

7476406

7476407

24700562470057

2470076

2470077

2470126

2470127

2470196

2470197

31


32/96

EXZHELLENT 606

1

2

3

Type P18 RU

32


CONSTRUCTION

Unarmoured cables for installation in offshore applications with special


Oil resistant.Max. rated conductor temperature in normal operation: 90 C.



1. CONDUCTOR


IEC 60092-351.


2. INSULATION


Non armoured

POWER

Thermoset compound mud resistant type SHF 2.

IEC 60092-359

3. OUTER SHEATH

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


33/96


(mm) (mm) (V/A. km)


Overalldiameter


7479206

7479207

7479208

7479306

7479307

7479308

7479309

7479310

7479311

7479312

7479313

7479314

7479315

7479316

7479317

7479318

7479406

7479407

74794087479409

7479410

7479411

7479412

7479413

7479414

2x1,5

2x2,5

2x4

3x1,5/1,5

3x2,5/2,5

3x4/4

3x6/6

3x10/10

3x16/16

3x25/16

3x35/17,5

3x50/25

3x70/35

3x95/47,5

3x120/60

3x150/75

4x1,5/1,5

4x2,5/2,5

4x4/44x6/6

4x10/10

4x16/16

4x25/16

4x35/17,5

4x50/25

10,4

11,2

12,3

11,1

12,1

13,1

14,4

16,4

18,6

22

24,5

30,5

34,3

39,2

43

47,2

12,3

13,3

14,616,1

18,3

20,7

24,5

27,3

34,3

170

205

260

195

250

315

395

565

785

1165

1525

2240

3015

4055

4980

5995

240

295

390495

710

990

1480

1940

2875

45

45

50

45

50

55

60

70

75

90

100

185

210

235

260

285

50

55

6065

75

85

100

165

210

21,7

13,5

8,42

21,7

13,5

8,42

5,61

3,35

2,15

1,39

1,03

0,781

0,563

0,429

0,355

0,304

21,69

13,48

8,425,61

3,35

2,15

1,39

1,03

0,781

0,419

0,389

0,364

0,419

0,389

0,364

0,34

0,316

0,299

0,294

0,283

0,277

0,263

0,26

0,253

0,25

0,419

0,389

0,3640,34

0,316

0,299

0,294

0,283

0,277

Code

33


34/96

EXZHELLENT 606

Semiconducting material and tinned copper wire braid.


4. INSULATION SCREENING




IEC 60092-359.

5. INNER COVERING

6. BRAID ARMOUR

7. OUTER SHEATH

Type RFOU

1

2

3

4

7

5

6

34


CONSTRUCTION

Medium voltage power cables for installation in offshore applications with

special performances on flame spread and low emission of smoke and

fumes.Oil resistant.

Max. rated conductor temperature in normal operation: 90 C.



1. CONDUCTOR

Semiconducting material.

2. CONDUCTOR SCREENING

Ethylene Propylene Rubber (EPR).

IEC 60092-351.

3. INSULATION

Rated voltage: 3,6 / 6 kV - 6 / 10 kV

- 8,7 / 15 kV - 12 / 20 kV

Armoured

POWER

IEC 60092-351

IEC 60092-354

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


35/96

Code (mm2) (kg/km)Nominal cross Weight

(mm) (mm)


Overalldiameter

ohm/km

Inductivereactance

(F/km)Capacitance

0,283

0,322

0,359

0,3990,432

0,526

0,288

0,327

0,359

0,399

0,132

0,125

0,118

0,1140,110

0,102

0,115

0,109

0,102

0,098

45

45

50

4550

55

60

70

75

90

25,0

26,5

28,0

30,031,5

36,5

48,5

52,0

55,0

60,0

20,0

21,5

23,5

25,026,5

31,0

41,5

45,0

48,0

52,0

1x50

1x70

1x95

1x1201x150

1x240

3x50/25

3x70/35

3x95/47,5

3x120/60

7480114

7480115

7480116

74801177480118

7480120

7480314

7480315

7480316

7480317

Type P3 RFOU

0,257

0,288

0,324

0,359

0,3890,472

0,257

0,288

0,324

0,359

0,135

0,126

0,121

0,115

0,1110,104

0,117

0,109

0,104

0,100

1265

1525

1855

2165

24853565

4395

5300

6805

7750

26,0

27,5

29,5

31,0

32,537,0

49,5

53,0

61,0

62,0

21,0

27,5

24,0

26,0

27,531,5

42,5

46,0

53,0

54,0

1x50

1x70

1x95

1x120

1x1501x240

3x50/25

3x70/35

3x95/47,5

3x120/60

7481114

7481115

7481116

7481117

74811187481120

7481314

7481315

7481316

7481317

Rated voltage: 6/10 kV

Type P4 RFOU

0,208

0,233

0,260

0,287

0,309

0,373

0,212

0,233

0,260

0,287

0,140

0,132

0,126

0,121

0,117

0,109

0,124

0,116

0,110

0,105

1430

1695

2035

2380

2730

3870

5490

6345

7700

8865

28,0

30,0

31,5

34,0

35,5

40,0

59,5

62,5

67,0

70,0

23,0

24,5

26,5

28,5

30,0

34,0

52,0

54,0

58,5

61,5

1x50

1x70

1x95

1x120

1x150

1x240

3x50/25

3x70/35

3x95/47,5

3x120/60

7482114

7482115

7482116

7482117

7482118

7482120

7482314

7482315

7482316

7482317

Rated voltage: 8,7/15 kV

Type P19 RFOU

0,181

0,201

0,223

0,246

0,264

0,3160,181

0,201

0,223

0,246

0,145

0,136

0,131

0,125

0,121

0,1130,130

0,120

0,116

0,111

1580

1865

2240

2560

2995

42405820

6775

8140

9405

30,5

32,0

34,5

36,0

38,5

43,560,5

64,0

68,5

72,5

25,5

26,5

29,0

30,5

32,0

36,552,5

56,0

60,0

63,5

1x50

1x70

1x95

1x120

1x150

1x2403x50/25

3x70/35

3x95/47,5

3x120/60

7483114

7483115

7483116

7483117

7483118

74831207483314

7483315

7483316

7483317


35

Type P2 RFOU Rated voltage: 3,6/6 kV


36/96

EXZHELLENT 606Type RFOU

1

2

3

4

7

5

6

36

Semiconducting material and tinned copper wire braid.


4. INSULATION SCREENING




NEK TS 606.

5. INNER COVERING

6. BRAID ARMOUR

7. OUTER SHEATH


CONSTRUCTION

Medium voltage power armoured cables for installation in offshore

applications with special performances on flame spread and low emission

of smoke and fumes.Halogen free, oil and mud resistant.




1. CONDUCTOR

Semiconducting material.

2. CONDUCTOR SCREENING


IEC 60092-351.

3. INSULATION

Rated voltage: 3,6 / 6 kV - 6 / 10 kV

- 8,7 / 15 kV - 12 / 20 kV

MUD RESISTANT

Armoured

POWER

IEC 60092-351

IEC 60092-354

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


37/96

Type P2/P9 RFOU

Code (mm2) (kg/km)Nominal cross Weight

(mm) (mm)


Overalldiameter

ohm/km

Inductivereactance

(F/km)Capacitance

0,283

0,322

0,359

0,3990,432

0,526

0,288

0,327

0,359

0,399

0,132

0,125

0,118

0,1140,110

0,102

0,115

0,109

0,102

0,098

1210

1475

1775

20902405

3495

4240

5170

6260

7495

25,0

26,5

28,0

30,031,5

36,5

48,5

52,0

55,0

60,0

20,0

21,5

23,5

25,026,5

31,0

41,5

45,0

48,0

52,0

1x50

1x70

1x95

1x1201x150

1x240

3x50/25

3x70/35

3x95/47,5

3x120/60

7484114

7484115

7484116

74841177484118

7484120

7484314

7484315

7484316

7484317


Type P3/P10 RFOU

0,257

0,288

0,324

0,359

0,3890,472

0,257

0,288

0,324

0,359

0,135

0,126

0,121

0,115

0,1110,104

0,117

0,109

0,104

0,100

1265

1525

1855

2165

24853565

4395

5300

6805

7750

26,0

27,5

29,5

31,0

32,537,0

49,5

53,0

61,0

62,0

21,0

27,5

24,0

26,0

27,531,5

42,5

46,0

53,0

54,0

1x50

1x70

1x95

1x120

1x1501x240

3x50/25

3x70/35

3x95/47,5

3x120/60

7485114

7485115

7485116

7485117

74851187485120

7485314

7485315

7485316

7485317


Type P4/P11 RFOU

0,208

0,233

0,260

0,287

0,309

0,373

0,212

0,233

0,260

0,287

0,140

0,132

0,126

0,121

0,117

0,109

0,124

0,116

0,110

0,105

1430

1695

2035

2380

2730

3870

5490

6345

7700

8865

28,0

30,0

31,5

34,0

35,5

40,0

59,5

62,5

67,0

70,0

23,0

24,5

26,5

28,5

30,0

34,0

52,0

54,0

58,5

61,5

1x50

1x70

1x95

1x120

1x150

1x240

3x50/25

3x70/35

3x95/47,5

3x120/60

7486114

7486115

7486116

7486117

7486118

7486120

7486314

7486315

7486316

7486317


Type P19/P21 RFOU

0,181

0,201

0,223

0,246

0,264

0,3160,181

0,201

0,223

0,246

0,145

0,136

0,131

0,125

0,121

0,1130,130

0,120

0,116

0,111

1580

1865

2240

2560

2995

42405820

6775

8140

9405

30,5

32,0

34,5

36,0

38,5

43,560,5

64,0

68,5

72,5

25,5

26,5

29,0

30,5

32,0

36,552,5

56,0

60,0

63,5

1x50

1x70

1x95

1x120

1x150

1x2403x50/25

3x70/35

3x95/47,5

3x120/60

7487114

7487115

7487116

7487117

7487118

74871207487314

7487315

7487316

7487317


37


38/96

EXZHELLENT 606


4. INNER COVERING


5. BRAID ARMOUR


IEC 60092-359.

6. OUTER SHEATH


IEC 60092-351.


2. INSULATION

1

2

3

4

5

6INSTRUMENTATION

Type S1 RFOU (i)

38


CONSTRUCTION

Armoured, individually screened pairs/triples cables for installation in

offshore with special performances on flame spread and low emission of

smoke and fumes.Oil resistant.



1. CONDUCTOR

Copper polyester tape with drain wire.

3. INDIVIDUAL SCREEN

Rated voltage: 150 / 250 V

Armoured & individually screened

IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


39/96

(mm2) (kg/km)Nominal cross Weight

(mm) (mm)


Overalldiameter

4271015

4271016

4271025

4271026

4271045

4271046

4271085

4271086

4271125

4271126

4271165

4271166

4271245

4271246

4281015

4281016

4281025

4281026

42810454281046

4281085

4281086

4281125

4281126

4281165

4281166

1x2x1

1x2x1,5

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1,5

1x3x1

1x3x1,5

2x3x1

2x3x1,5

4x3x14x3x1,5

8x3x1

8x3x1,5

12x3x1

12x3x1,5

16x3x1

16x3x1,5

8,5

8,5

13,5

14,0

16,0

16,5

21,0

22,0

26,0

27,0

29,5

30,5

37,0

38,5

8,5

9,0

15,0

15,5

18,018,5

24,0

24,5

29,5

30,5

33,0

34,5

11,5

12,0

18,0

18,0

20,0

21,0

26,0

27,0

31,0

32,5

35,0

36,5

43,5

45,5

12,0

12,5

19,5

20,0

22,023,0

29,0

29,5

35,0

36,5

39,0

41,0

225

245

515

540

605

680

975

1095

1335

1550

1725

1930

2525

2915

250

265

610

675

755855

1220

1385

1740

1995

2270

2580

Code

Electrical parameters and characteristic properties, see page 23.

39


40/96

EXZHELLENT 606

1

2

3

4

5

6

Type S2 RFOU (c)

40


4. INNER COVERING


5. BRAID ARMOUR


IEC 60092-359.

6. OUTER SHEATH


IEC 60092-351.


2. INSULATION

INSTRUMENTATION


CONSTRUCTION

Armoured, colletively screened pairs/triples cables for installation in

offshore applications with special performances on flame spread and low

emission of smoke and fumes.Oil resistant.



1. CONDUCTOR




Armoured & collectively screened

IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


41/96


(mm) (mm)


Overalldiameter

4272025

4272026

4272045

4272046

4272085

4272086

4272125

4272126

4272165

4272166

4272245

4272246

4282025

4282026

4282045

4282046

4282085

4282086

42821254282126

4282165

4282166

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1,5

2x3x1

2x3x1,5

4x3x1

4x3x1,5

8x3x1

8x3x1,5

12x3x112x3x1,5

16x3x1

16x3x1,5

9,5

10,0

13,5

14,0

16,5

19,5

20,5

21,5

22,0

26,0

28,5

34,0

10,5

13,5

12,5

14,5

15,5

20,5

19,020,0

20,0

24,0

13,0

13,5

17,5

18,0

21,5

24,5

25,5

26,5

27,0

31,0

34,5

40,5

14,5

17,5

16,5

19,0

20,0

25,5

24,525,0

25,5

29,0

285

305

475

525

720

880

975

1140

1195

1465

1710

2230

360

470

530

640

855

1105

12001395

1460

1780

Code

Two pair cables collectively screened are laid up with diametrically opposite cores.

Electrical parametres and characteritic properties, see page 23.

41


42/96

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS INSTRUMENTATION


IEC 60092-359.

4. BRAID ARMOUR

1

2

3

4

EXZHELLENT 606Type S11 RU (i)

42


IEC 60092-351.


2. INSULATION


CONSTRUCTION

Unarmoured, individually screened pairs/triples cables for installation in





1. CONDUCTOR




MUD RESISTANT

Armoured


43/96


(mm)

Overalldiameter

4267014

4267016

4267017

4267024

4267026

4267027

4267034

4267036

4267037

4267074

4267076

4267077

4267124

4267126

4267127

4267194

4267196

4267197

42672444267246

4267247

4267274

4267276

4267277

1x2x0,75

1x2x1,5

1x2x2,5

2x2x0,75

2x2x1,5

2x2x2,5

3x2x0,75

3x2x1,5

3x2x2,5

7x2x0,75

7x2x1,5

7x2x2,5

12x2x0,75

12x2x1,5

12x2x2,5

19x2x0,75

19x2x1,5

19x2x2,5

24x2x0,7524x2x1,5

24x2x2,5

27x2x0,75

27x2x1,5

27x2x2,5

7,0

8,0

9,0

11,5

13,5

15,0

12,0

14,5

16,0

16,5

19,5

22,0

22,0

26,5

29,5

26,0

31,5

35,5

31,037,5

42,0

31,5

38,5

43,0

90

125

160

185

230

295

200

295

390

410

610

815

705

1030

1380

1075

1570

2105

13152020

2720

1440

2220

2995

Code


43


44/96


IEC 60092-359.

4. OUTER SHEATH

1

2

3

4

EXZHELLENT 606Type S12 RU (c)

44

IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22



IEC 60092-351.


2. INSULATION


CONSTRUCTION

Unarmoured, colletively screened pairs/triples cables for installation in





1. CONDUCTOR


3. COLLECTIVE SCREEN


Collectively screened


45/96


(mm)

Overalldiameter

4268024

4268026

4268027

4268034

4268036

4268037

4268074

4268076

4268077

4268124

4268126

4268127

4268194

4268196

4268197

4268244

4268246

4268247

42682744268276

4268277

2x2x0,75

2x2x1,5

2x2x2,5

2x2x0,75

3x2x1,5

3x2x2,5

7x2x0,75

7x2x1,75

12x2x0,75

12x2x1,5

12x2x2,5

12x2x2,25

19x2x0,75

19x2x1,5

19x2x2,5

24x2x0,75

24x2x1,5

24x2x2,5

27x2x0,7527x2x1,5

27x2x2,5

11,5

14,0

15,5

12,5

15,0

17,0

16,5

20,0

22,5

22,0

27,0

30,5

26,5

32,0

36,5

31,0

38,0

43,0

32,039,0

44,0

155

220

285

185

280

370

345

540

720

575

895

1225

835

1320

1820

1070

1705

2365

11801860

2590

Code



45


46/96

EXZHELLENT 606

1

2

3

4

5

6

Type S1/S5 RFOU (i)

46


4. INNER COVERING


5. BRAID ARMOUR


NEK TS 606.

6. OUTER SHEATH


IEC 60092-351.


2. INSULATION

INSTRUMENTATION


CONSTRUCTION

Armoured, individually screened pairs/triples cables for installation in


emission of smoke and fumes.Halogen free, oil and mud resistant.



1. CONDUCTOR




MUD RESISTANT

Armoured & individual screened

IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


47/96


(mm) (mm)


Overalldiameter

4273015

4273016

4273025

4273026

4273045

4273046

4273085

4273086

4273125

4273126

4273165

4273166

4273245

4273246

4283015

4283016

4283025

4283026

42830454283046

4283085

4283086

4283125

4283126

4283165

4283166

1x2x1

1x2x1,5

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1

1x3x1

1x3x1,5

2x3x1

2x3x1,5

4x3x14x3x1,5

8x3x1

8x3x1,5

12x3x1

12x3x1,5

16x3x1

16x3x1,5

8,5

8,5

13,5

14,0

16,0

16,5

21,0

22,0

26,0

27,5

29,5

30,5

36,5

38,0

8,5

9,0

15,0

15,5

18,018,5

24,0

24,5

29,5

30,5

33,0

34,5

11,5

12,0

18,0

18,0

20,0

21,0

26,0

27,0

31,0

32,5

35,0

36,0

43,5

45,0

12,0

12,5

19,5

20,0

22,023,0

29,0

29,5

35,0

36,5

39,0

41,0

230

250

525

560

620

690

995

1095

1365

1560

1735

1935

2585

2865

255

280

630

690

7701255

1255

1390

1785

2010

2285

2585

Code


47


48/96

EXZHELLENT 606

1

2

3

4

5

6

Type S2/S6 RFOU (c)

48


4. INNER COVERING


5. BRAID ARMOUR


NEK TS 606.

6. OUTER SHEATH


IEC 60092-351.


2. INSULATION

INSTRUMENTATION


CONSTRUCTION

Armoured, colectively screened pairs/triples cables for installation in


emission of smoke and fumes.Halogen free, oil and mud resistant.



1. CONDUCTOR




MUD RESISTANT


IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


49/96


(mm) (mm)


Overalldiameter

4274025

4274026

4274045

4274046

4274085

4274086

4274125

4274126

4274165

4274166

4274245

4284246

4284025

4284026

4284045

4284046

4284085

4284086

42841254284126

4284165

4284166

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1,5

2x3x1

2x3x1,5

4x3x1

4x3x1,5

8x3x1

8x3x1,5

12x3x112x3x1,5

16x3x1

16x3x1,5

9,5

10,0

13,5

14,0

16,5

17,5

20,5

21,5

22,0

22,5

28,5

29,5

10,5

12,0

12,5

14,5

15,5

18,0

19,020,0

20,0

24,0

13,0

13,5

17,5

18,0

21,0

22,0

25,5

26,5

27,0

28,0

34,5

36,0

14,5

16,0

16,5

19,0

20,0

23,0

24,525,0

25,5

29,5

285

315

480

535

725

825

1005

1145

1205

1385

1765

2135

365

435

535

645

865

1045

12101405

1465

1825

Code



49


50/96

1

2

3

4

6

5

Type P5 BFOUGENFIRE 606

50


4. INNER COVERING


5. BRAID ARMOUR


IEC 60092-359.

6. OUTER SHEATH

2. MICA TAPE

POWER


CONSTRUCTION



Fire and oil resistant.Minimum working temperature

-40 C.


1. CONDUCTOR


IEC 60092-351.


3. INSULATION


FIRE RESISTANT

Armoured

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


51/96


(mm) (mm) (V/A. km)


Overalldiameter


7473206

7473207

7473208

7473306

7473307

7473308

7473309

7473310

7473311

7473312

7473313

7473314

7473315

7473316

7473317

7473318

7473406

7473407

24730562473057

2473076

2473077

2473126

2473127

2473196

2x1,5

2x2,5

2x4

3x1,5/1,5

3x2,5/2,5

3x4/4

3x6/6

3x10/10

3x16/16

3x25/16

3x35/17,5

3x50/25

3x70/35

3x95/47,5

3x120/60

3x150/75

4x1,5/1,5

4x2,5/2,5

5x1,55x2,5

7x1,5

7x2,5

12x1,5

12x2,5

19x1,5

10,0

10,5

11,5

10,5

11,5

12,5

13,5

15,5

17,5

21

23

27

30,5

35

41,5

46

11,5

12,5

1314

14

15

18,5

20,5

22

13,5

15

16

14,5

15,5

16,5

18

20

22

26

28,5

32

36

41,5

48,5

53

15,5

16,5

1718,5

18,5

19,5

23,5

25

27

275

355

415

345

400

475

580

770

1030

1450

1820

2430

3310

4485

6020

7365

390

460

470555

540

650

820

995

1110

21,7

13,5

8,42

21,7

13,5

8,42

5,6

3,35

2,15

1,39

1,03

0,78

0,56

0,43

0,35

0,3

-

-

--

-

-

-

-

-

0,41

0,38

0,35

0,41

0,38

0,35

0,33

0,31

0,29

0,29

0,28

0,27

0,26

0,26

0,25

0,25

-

-

--

-

-

-

-

-

Code

51


52/96

1

2

3

4

6

5

Type P5/P12 BFOUGENFIRE 606

52


4. INNER COVERING


5. BRAID ARMOUR


NEK TS 606.

6. OUTER SHEATH

2. MICA TAPE

POWER


CONSTRUCTION



Halogen free, fire, oil and mud resistant.Max. rated conductor temperature in normal operation: 90 C.



1. CONDUCTOR


IEC 60092-351.


3. INSULATION


FIRE & MUD RESISTANT

Armoured

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


53/96


(mm) (mm) (V/A. km)


Overalldiameter


7474206

7474207

7474208

7474306

7474307

7474308

7474309

7474310

7474311

7474312

7474313

7474314

7474315

7474316

7474317

7474318

7474406

7474407

24740562474057

2474076

2474077

2474126

2474127

2474196

2x1,5

2x2,5

2x4

3x1,5/1,5

3x2,5/2,5

3x4/4

3x6/6

3x10/10

3x16/16

3x25/16

3x35/17,5

3x50/25

3x70/35

3x95/47,5

3x120/60

3x150/75

4x1,5/1,5

4x2,5/2,5

5x1,55x2,5

7x1,5

7x2,5

12x1,5

12x2,5

19x1,5

10,0

10,5

11,5

10,5

11,5

12,5

13,5

15,5

17,5

21

23

27

30,5

35

41,5

46

11,5

12,5

1314

14

15

18,5

20,5

22

13,5

15

16

14,5

15,5

16,5

18

20

22

26

28,5

32

36

41,5

48,5

53

15,5

16,5

1718,5

18,5

19,5

23,5

25

27

275

355

415

345

400

475

580

770

1030

1450

1820

2430

3310

4485

6020

7365

390

460

470555

540

650

820

995

1110

21,6

13,4

8,42

21,6

13,4

8,42

5,6

3,35

2,15

1,39

1,03

0,78

0,56

0,43

0,35

0,3

-

-

--

-

-

-

-

-

0,41

0,38

0,35

0,41

0,38

0,35

0,33

0,31

0,29

0,29

0,28

0,27

0,26

0,26

0,25

0,25

-

-

--

-

-

-

-

-

Code

53


54/96

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22


IEC 60092-351.


3. INSULATION


NEK TS 606.

4. OUTER SHEATH

2. MICA TAPE

1

2

3

4

Type P17 BUGENFIRE 606

54

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2



CONSTRUCTION

Unarmoured cables for installation in offshore applications with special


Halogen free, fire, oil and mud resistant.Max. rated conductor temperature in normal operation: 90 C.



1. CONDUCTOR


FIRE RESISTANT

Non amoured


55/96


(mm) (V/A. km)

Overalldiameter


7478206

7478207

7478208

7478306

7478307

7478308

7478309

7478310

7478311

7478312

7478313

7478314

7478315

7478316

7478317

7478318

7478406

7478407

74784087478409

7478410

7478411

7478412

7478413

7478414

2x1,5

2x2,5

2x4

3x1,5/1,5

3x2,5/2,5

3x4/4

3x6/6

3x10/10

3x16/16

3x25/16

3x35/17,5

3x50/25

3x70/35

3x95/47,5

3x120/60

3x150/75

4x1,5/1,5

4x2,5/2,5

4x4/44x6/6

4x10/10

4x16/16

4x25/16

4x35/17

4x50/25

9,5

10

11

10

10,5

12

13,5

16

18

21,5

24

30

34

39

43

47,5

10,5

12

1315,5

17,5

20

24

27

33,5

125

160

205

150

190

260

345

505

715

1080

1430

2105

2865

3845

4745

5820

180

235

315435

625

890

1360

1810

2670

21,7

13,5

8,41

21,7

13,5

8,41

5,57

3,32

2,12

1,37

1,01

0,76

0,54

0,41

0,34

0,29

21,68

13,47

8,415,57

3,32

2,12

1,37

1,01

0,76

0,38

0,36

0,34

0,38

0,36

0,34

0,22

0,22

0,22

0,22

0,21

0,21

0,2

0,2

0,2

0,2

0,38

0,36

0,340,22

0,22

0,22

0,22

0,21

0,21

Code

55


56/96

Thermoset comp

NEK TS 606.

7. OUTER SHEATH

1

2

3

4

5

6

7

Type S3 BFOU (i)

56




5. INNER COVERING

Tinned copper wire braid.6. BRAID ARMOUR

2. MICA TAPE

INSTRUMENTATION


CONSTRUCTION

Armoured, individualy screened pairs/triples cables for installation in

offshore applications with special performances of non fire propagation

and low emission of smoke and fumes.Fire and oil resistant.



1. CONDUCTOR


IEC 60092-351.


3. INSULATION


FIRE RESISTANT


IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS

GENFIRE 606


57/96


(mm) (mm)


Overalldiameter

4275015

4275016

4275025

4275026

4275045

4275046

4275085

4275086

4275125

4275126

4275165

4275166

4275245

4275246

4285015

4285016

4285025

4285026

42850454285046

4285085

4285086

4285125

4285126

4285165

4285166

1x2x1

1x2x1,5

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1,5

1x3x1

1x3x1,5

2x3x1

2x3x1,5

4x3x14x3x1,5

8x3x1

8x3x1,5

12x3x1

12x3x1,5

16x3x1

16x3x1,5

9,0

9,5

14,5

15,0

17,5

18,0

23,0

24,0

29,5

29,5

32,5

33,5

41,0

42,0

9,5

10,0

16,5

17,0

19,520,0

26,0

27,5

32,5

33,5

36,5

38,0

12,5

12,5

19,0

19,5

22,0

22,5

28,0

29,0

35,0

35,5

38,5

39,5

48,0

49,5

13,0

13,0

21,0

21,5

24,025,0

31,0

32,5

38,5

39,5

43,0

45,0

250

260

560

595

680

735

1065

1190

1565

1685

1960

2180

2845

3175

270

290

695

760

850940

1360

1560

2060

2270

2535

2895

Code


57


58/96

GENFIRE 606

1

2

3

4

5

7

6

Type S4 BFOU (c)

58


IEC 60092-359.

7. OUTER SHEATH




5. INNER COVERING


2. MICA TAPE

INSTRUMENTATION


CONSTRUCTION

Armoured, collectively screened pairs/triples cables for installation in


emission of smoke and fumes.Fire and oil resistant.



1. CONDUCTOR


IEC 60092-351.


3. INSULATION


FIRE RESISTANT


IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


59/96


(mm) (mm)


Overalldiameter

4276025

4276026

4276045

4276046

4276085

4276086

4276125

4276126

4276165

4276166

4276245

4276246

4286025

4286026

4286045

4286046

4286085

4286086

42861254286126

4286165

4286166

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1,5

2x3x1

2x3x1,5

4x3x1

4x3x1,5

8x3x1

8x3x1,5

12x3x112x3x1,5

16x3x1

16x3x1,5

10,5

11,0

14,5

15,0

18,5

21,5

22,5

24,0

24,0

25,5

31,5

33,0

11,0

14,5

13,5

15,5

17,0

22,5

21,022,0

22,5

26,5

14,0

14,5

18,5

19,5

23,0

26,5

28,0

29,0

29,5

31,0

37,5

40,0

15,0

19,0

18,0

20,0

22,0

27,5

26,527,5

28,0

32,0

305

340

515

580

790

960

1090

1270

1305

1530

1925

2350

395

565

590

700

935

1190

13101545

1620

1965

Code



59


60/96

1

2

3

4

5

GENFIRE 606Type S13 BU (i)

60


IEC 60092-359.

5. OUTER SHEATH



2. MICA TAPE

INSTRUMENTATION


CONSTRUCTION

Unarmoured, individualy screened pairs/triples cables for installation in

offshore applications with special performances of non fire propagation

and low emission of smoke and fumes.Fire and oil resistant.



1. CONDUCTOR


IEC 60092-351.


3. INSULATION


FIRE RESISTANT

Individually screened

IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


61/96


(mm)

Overalldiameter

4269014

4269016

4269017

4269024

4269026

4269027

4269034

4269036

4269037

4269074

4269076

4269077

4269124

4269126

4269127

4269194

4269196

4269197

42692444269246

4269247

4269274

4269276

4269277

1x2x0,75

1x2x1,5

1x2x2,5

2x2x0,75

2x2x1,5

2x2x2,5

3x2x0,75

3x2x1,5

3x2x2,5

7x2x0,75

7x2x1,5

7x2x2,5

12x2x0,75

12x2x1,5

12x2x2,5

19x2x0,75

19x2x1,5

19x2x2,5

24x2x0,7524x2x1,5

24x2x2,5

27x2x0,75

27x2x1,5

27x2x2,5

8,0

9,0

10,0

13,0

15,0

16,5

13,5

16,0

17,5

18,0

21,5

24,0

24,5

29,0

32,5

29,5

35,0

39,0

35,041,5

46,0

35,5

42,5

47,5

100

140

175

185

260

325

235

335

435

460

680

900

785

1150

1540

1170

1745

2340

15102265

3005

1655

2485

3330

Code



61


62/96

1

2

3

4

5

GENFIRE 606Type S14 BU (c)

62


IEC 60092-359.

5. OUTER SHEATH



2. MICA TAPE

INSTRUMENTATION


CONSTRUCTION

Unarmoured, collectively screened pairs/triples cables for installation in


emission of smoke and fumes.Fire and oil resistant.



1. CONDUCTOR


IEC 60092-351.


3. INSULATION


FIRE RESISTANT

Collectively screened

IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


63/96


(mm)

Overalldiameter

4270024

4270026

4270027

4270034

4270036

4270037

4270074

4270076

4270077

4270124

4270126

4270127

4270194

4270196

4270197

4270144

4270146

4270147

42702744270276

4270277

2x2x0,75

2x2x1,5

2x2x2,5

3x2x0,75

3x2x1,5

3x2x2,5

7x2x0,75

7x2x1,5

7x2x2,5

12x2x0,75

12x2x1,5

12x2x2,5

19x2x0,75

19x2x1,5

19x2x2,5

24x2x0,75

24x2x1,5

24x2x2,5

27x2x0,7527x2x1,5

27x2x2,5

13,0

15,5

17,0

14,0

16,5

18,0

18,5

22,0

24,5

25,0

30,0

33,5

30,0

35,5

40,0

35,5

42,5

47,0

36,043,5

48,5

200

285

370

220

320

405

405

600

805

675

1020

1360

985

1500

2040

1275

1960

2625

13852135

2895

Code



63


64/96

GENFIRE 606

1

2

3

4

5

6

7

Type S3/S7 BFOU (i)

64


NEK TS 606.

7. OUTER SHEATH




5. INNER COVERING


2. MICA TAPE

INSTRUMENTATION


CONSTRUCTION

Armoured. individually screened pairs/triples cables for installation in


emission of smoke and fumes.Halogen free, fire, oil and mud resistant.



1. CONDUCTOR


IEC 60092-351.


3. INSULATION




IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


65/96


(mm) (mm)


Overalldiameter

4277015

4277016

4277025

4277026

4277045

4277046

4277085

4277086

4277125

4277126

4277165

4277166

4277245

4277246

4287015

4287016

4287025

4287026

42870454287046

4287085

4287086

4287125

4287126

4287165

4287166

1x2x1

1x2x1,5

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1,5

1x3x1

1x3x1,5

2x3x1

2x3x1,5

4x3x14x3x1,5

8x3x1

8x3x1,5

12x3x1

12x3x1,5

16x3x1

16x3x1,5

9,0

9,5

14,5

15,0

17,5

18,0

23,0

24,0

28,5

29,5

32,5

33,5

41,0

42,0

9,5

10,0

16,5

17,0

19,520,0

26,0

27,0

32,5

33,5

36,5

38,0

12,0

12,5

19,0

19,5

22,0

22,5

28,0

29,0

34,0

35,5

38,5

39,5

48,0

49,0

12,5

13,0

21,0

21,5

24,025,0

31,0

32,0

38,5

39,5

43,0

45,0

245

265

580

620

685

740

1075

1190

1530

1695

1975

2185

2865

3165

270

290

720

770

865940

1370

1525

2060

2305

2555

2900

Code


65


66/96

GENFIRE 606

1

2

3

4

5

6

7

Type S4/S8 BFOU (c)

66


NEK TS 606.

7. OUTER SHEATH




5. INNER COVERING


2. MICA TAPE

INSTRUMENTATION


CONSTRUCTION

Armoured, collectively screened pairs/triples cables for installation in


emission of smoke and fumes.Halogen free, fire, oil and mud resistant.



1. CONDUCTOR


IEC 60092-351.


3. INSULATION




IEC 60092-351

IEC 60092-359

IEC 60092-376

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60331-21

IEC 60331-1 and -2

IEC 60332-1-2

IEC 60332-3-22

STANDARDS


67/96


(mm) (mm)


Overalldiameter

4278025

4278026

4278045

4278046

4278085

4278086

4278125

4278126

4278165

4278166

4278245

4278246

4288025

4288026

4288045

4288046

4288085

4288086

42881254288126

4288165

4288166

2x2x1

2x2x1,5

4x2x1

4x2x1,5

8x2x1

8x2x1,5

12x2x1

12x2x1,5

16x2x1

16x2x1,5

24x2x1

24x2x1,5

2x3x1

2x3x1,5

4x3x1

4x3x1,5

8x3x1

8x3x1,5

12x3x112x3x1,5

16x3x1

16x3x1,5

10,5

11,0

14,5

17,0

18,5

21,5

22,5

24,0

24,0

29,0

31,5

37,5

11,0

14,5

13,5

18,0

17,0

22,5

21,022,0

22,5

30,5

14,0

14,5

18,5

21,5

23,0

26,5

28,0

29,0

29,5

34,0

37,5

44,0

15,0

19,0

18,0

22,5

22,0

27,5

26,527,5

28,0

36,0

310

340

525

615

800

970

1100

1280

1315

1625

1940

2450

395

560

595

765

940

1195

13201555

1630

2090

Code



67


68/96

1

2

3

4

5

Ethylene propylene rubber (EPR).

IEC 60092-351.


EXZHELLENT 606Type RFOU-VFD

68

Copper/polyester tape.


(95 % coverage density)

4. SCREEN / ARMOUR

Thermoset compound type SHF Mud.

NEK TS 606.

5. OUTER SHEATH

2. INSULATION

INSTRUMENTATION


CONSTRUCTION

Armoured cables for variable frequency drive systems with maximum

degree of screening for both low and high frequencies. Combined shield

coverage: 100%.Flexible conductor to improve handeability in installation process.

Fire retardant. Halogen free. Oil and Mud Resistant.



Tinned copper, stranded class 2 (Flexible).

1. CONDUCTOR


3. INNER COVERING


VARIABLE FREQUENCY DRIVE

MUD RESISTANT / Armoured

IEC 60092-351

IEC 60092-353

IEC 60092-359

NEK TS 606

IEC 60754-1

IEC 60754-2

IEC 61034-2

IEC 60332-1-2

Date post:	02-Jun-2018
Category:	Documents
Upload:	kingdiamond
View:	227 times
Download:	0 times

Offshore Cable

Documents