Date post: | 06-Aug-2018 |
Category: |
Documents |
Upload: | nguyenthuan |
View: | 238 times |
Download: | 1 times |
OFFSHORE PRODUCTS APPLICATIONS
BLOWER SKIDCooling Fans for Draw-works
El t
HSV 450 B1AF
El-motorsC/W Air intake chamber
Example of Offshore Air Handling Units
OFFSHORE PRODUCTS APPLICATIONS
MSV 315 B1FAN SKID
C/W Ai i t k & filt fC/W Air intake & filters for Ventilation of Drillers Cabin
Drill Module
Example of Offshore Air Handling Units
OFFSHORE PRODUCTS APPLICATIONS
MSV 250MSV 250
FAN CABINETC/W Air Intake for
Ventilation of machine roomOffshore cranes
Example of Offshore Air Handling Units
Scope of Supply
Reference project: Deepsea Rig
Scope of Supply, Cooling Fans for Drawworks
Produkt Note before Orderline note
1
Pos.01: V1574/
AHD 500-4600
Blower Skid f.
Drawworks
Motor
* Blower Skid in acc.to GA Drawing: 3-10703 * Blower Skid in acc.to Purch.
Specs.: 73142104 --------------------------------------------------------------------------------
Each Blower Skid comprising the following: * 2off, Centrifugal fans, MSV 700 B1,
listed below pos.02. * 2off, Inlet chambers, c/w droplet separators "DRS" and
prefilterpad in 2/2. Chambers inside sound insulated. Access from top chambers. *
1off, Base frame, c/w cert. lifting lugs, Gunnebo and earthing Studs. * 2off,
Backflow dampers, make BAAS, AISI 316. * 1off, Plenum chamber in AISI 316
execution. * Blower Skid to be packed in a disposable light tarpaulin
Deepsea Atlantic/Stavangersemi submersible drilling rig ultra deepwater and harsh environment
Scope of Supply Drillers Cabin p p g p
MSV700B1AF
Pos.02: Direct
driven, medium
pressure
centrifugal fan,
22000m3h
* Insulating of fan housings with 5mm sound muffling plates * Drain Plug on
fan housings, R 1/2" (Muff & Plug) * Motor : EExde - IIB/T4 - IP56 - Cenelec *
Heater: 1x 230V/ 60Hz/ PTC Termistors incl. * Motor painted in acc. to ABB
Offshore Paint System
DRS_FPos.03: Droplet
Seperators* Droplet Separator for Air Intake, Part of Inlet Chamber * 1pc. for each fan
1Pos.04: Mounted
on Fan outlet
* Manufacturer: BAAS - Component AS * Main Dimensions: W500 x H700 x
L300mm * Flange Details in acc. to Dwg.: 3-11924 * Dampers executed in
AISI 316 * To be mounted in pairs opposite, airstream directed
downwards(vertical)
SILENCERPos.05: Blower
Skid F I l t
* Internal Duct Size x Lenght: W1000 x H1250 x L1300 * To be mounted
b t d t l t / f i l t d i i t k h b
Scope of Supply, Drillers Cabin
Produkt Note before Orderline note
DRS_GPos.03: Droplet Seperator
* Part of Air Intake/ Fan Skid
P 01 F Skid Fan Inlet between adapterplate/ fan inlet and airintake chamber
SILENCERPos.06: Blower
Skid Outlet
* Internal Duct Size x Lenght: W1000 x H800 x L1800 * To be mounted right
after Blower Skid's Plenum Chamber ----------------------------------------------------
-------------------------------------- * Silencers in acc. to Purch. Specs.: 73142325 *
Silencers, fixed mounted, in acc to GA Dwg. 2 - 3384 * Silencers to be
delivered as seperate items, but complete with neccesary accessories like
bolts,washers & nuts. Each silencer to be clearly marked up where it belongs.
1
Pos.07: Sound
Level
Measurement
* Compl. with Test Report for Levels for Acoustic Pressure/ Sound Levels.
Report comprises 2pages.
DocumentationPos.08: Final
Documentation
* Test & Inspection Reports in acc. to Natoil FAT Procedure * Sound Level
Test Report, See Pos.07 above.
SKID01
Pos.01: Fan Skid m/ 2x, MSV 350 B1. Executionwithout / resirc
•Drawing 2-3684 * Air Intake complete w/dropletseparator "DRS” and EU7 filter (CamGT). * Back-Flow Damper(BAAS), 2 pcs. For fan outlet * Flexibel collar, Ø 400, monted on outlet of plenum chamber 2pcs. Supplyfans.
* External pressure drop for skid, max.
MSV350B1AFPos.02: Supply Fans
600Pa/Ps * Motor: EExde - IIB/T4 - IP56 -PTC Thermistorer * Motors c/w spaceheater 1x230V * Motors c/w offshore zink/ epoxy painting
Quality by Experience - Efficiency by technology
2-3684 2-3584
3-10703
Reference project: Deepsea Rig
Deepsea RIG Nyborg AS has participated in delivering HVAC equipment to the following project, including Cooling fans for Drawworks and ventilation of drillers cabin, listed below also similar project of equal deliverance of different owners.
Deepsea Atlantic and Deepsea Stavanger.The two units are scheduled for delivery from Daewoo Shipbuilding and Marine Engineering (DSME) in South Korea early 2009 and 2 quarter 2010 respectively. The first unit - Deepsea Atlantic has signed a long term contract with StatoilHydro in Norway. The second unit Deepsea Stavanger is currently being marketed World Wide.
Green RigDeepsea Atlantic / Stavanger is designed for environmental sensitive areas, and the utmost focus has been put on zero discharge, low emissions and electrical solutions to reduce onboard oil volumes and associated pollution risks. Separate drain systems are installed for the machinery area drilling area and all outside clean deck areas No drain water isdrain systems are installed for the machinery area, drilling area and all outside clean deck areas. No drain water is discharged without passing a cleaning system which ensures acceptable oil content. Important installations and arrangements to obtain the green rig are:• Enclosed derrick which prevents mud spill to sea.• All drain lines routed to central cleaning unit by use of several tanks and pumps.• Discharge from mud pits by pumping, no gravity discharge.• Waste management system implemented• Low emission of NOX, clean design engines.• Closed loop BOP control system• Electrical drawworks with power regeneration
Similar References:Project to owners of:MosvoldCoslMaerskPetrobrasGazflotIsland InnovatorAker OilfieldKeppel FelsStena Drillmax
Quality by Experience - Efficiency by technology
Transocean
Reference project: HVAC Mud module, for Maracc, Island Innovator
Produkt Note before Orderline noteDRS_G Del av Pos.03, System S20
P 01 S t E11Fan Skid including – Base frame - 2x. exhaust.fan, LSV 800 B1, data acc. pos.02. - 2x, Backflow d f tl t BAAS 2 M Sh t Off D I l t Ø 800 BAAS i l t d
Scope of Supply
SKID01Pos.01: System E11, 30850m3h - 1500Pa Ext.
damper on fan outlet, BAAS. - 2x, Man Shut-Off Damper on Inlet, Ø 800, BAAS. - uninsulatedplenumchamber - insulated single inlet chamber, 90 ̊. on fan inntake, opening 620 x 1000mm -Compl. acc. to drw. 3-11700
LSV800B1BGPos.02: Extract Fans, System E11
* Motors: EExe, II/T3, IP56, PTC Thermistors * Standstill heating, 1x230V
SKID01Pos.03: System S20, 2500 3/h 600P E t
Fan Skid including: * Compl. acc. to drw 3-11701 * base frame * uninsulated intakechamber * Intakelouver/ dropletseparator DRS 605x620 * EU7 filter CamGT, 1x, 1/1Bag * Supplyfans, 2x,
04 * 2 B kfl d f tl t BAAS * Pl h b * M h li t d2500m3/h - 600Pa Ext. acc. pos.04. * 2x, Backflowdamper on fanoutlet, BAAS. * Plenumchamber * Magnehelic mounted with tubing
MSV350B1AFPos.04: Supply Fans, System S20
* Motors: EExde, IIB/T4, IP56, PTC * Standstillheating, 1x230V
MSV125B1BGPos.05: Extract Fan, System E21
* Motor: EExde, IIB/T4, IP56. * Standstill heating, 1x230V * Drawing 3-11702
Quality by Experience - Efficiency by technology
3-117003-11701
3-11702
Reference project: Island Innovator
Nyborg AS has participated in delivering HVAC equipment to the following project, including two fan skid , Fan unit for Extr Shale Shaker Room, Mud tanks and Supply Fan unit for Mud Contr room, LER, Mud Lab.Listed below also similar project of equal deliverance of different owners.
The intervention unit is the first of its kind, and is designed for North Sea operations The GM4000 is a fully equipped semi submersible unit based onoperations. The GM4000 is a fully equipped semi-submersible unit based on proven design. Island Offshore is responsible for the marketing and management the vessel, as well as providing project management and supervision during construction. Island Offshore has an unrivalled track record, having performed numerous light well intervention operations for StatoilHydro, Chevron and Nexen.The GM4000 is a state of the art top-side from National Oilwell Varco and Nymo.
Similar References:Project to owners of:Awilco:WilPromotorWilPioneerWilPioneerWilInnovatorSemi V
Quality by Experience - Efficiency by technology