12
OIL AND GAS Products and Services Catalogue
OIL AND GASProducts and Services Catalogue
T: 01452 330011 | [email protected] | www.boiswood.co.uk
Markets We Serve (INTRO PAGE)
At Boiswood we have a broad experience of the equipment used for the
control of gases and liquids and we are a well respected supplier to many
of the UK's most advanced manufacturing facilities.
Boiswood was established in 1989 and since then we have gathered an in-
depth knowledge of high quality products carefully selected from some of
the world's leading manufacturers - all of whom recognise that the ability
to provide quality products and support is the key to success in high tech
markets.
Markets We Serve (INTRO PAGE)
T: 01452 330011 | [email protected] | www.boiswood.co.uk
Our Product SolutionsMarkets We Serve (INTRO PAGE)
We have over 25 years experience providing vital components and
tailored solutions to the Oil and Gas industry, serving customers who
operate everything from platforms and refineries to skids and wellhead
automation.
DURABILITY
Our products are expertly designed and engineered to be fit for purpose
in the most rugged environments.
RELIABILITY
We always focus on offering “fit and forget” solutions, working closely
with all of our customers to come up with the best option time and time
again.
AFFORDABILITY
When it comes to price, you can count on us to offer you the best deal,
utilising all of our supply channels and local stocks.
Our Product Solutions
T: 01452 330011 | [email protected] | www.boiswood.co.uk
• Gas and Liquid Service• Up to 6,000 PSIG Inlet Pressure• Adjustable Outlet Pressures of up to 750 PSIG • Operating Temperatures from -40°C to +260°C
PR1 SERIESInstrumentation Pressure Regulator
The PR1 Series is a versatile pressure reducing regulator designed to fulfil a wide range of needs in instrumentation oil and gas applications.
• Gas and Liquid Service• Up to 3,600 PSIG Inlet Pressure• Adjustable Outlet Pressures of up to 290 PSIG and down as low as
0.07 PSIG • Operating Temperatures from -35°C to +130°C
DM505 SERIESProcess Pressure Regulator
The DM505 is a self-acting proportional control valve for small volumes, manufactured from deep-drawn Stainless Steel featuring excellent corrosion resistance.
• Electropolished Body with better than 25 Ra finish in diaphragm cavity for optimal sealing surface
• Available in 120 VAC or 240 VAC • Optional TCO heating cartridge and proportional controller • Modular pressure control and heat exchanger assemblies for easy
maintenance
HPR2 SERIESElectrically Heated Pressure Regulator
The HPR2 Series heated pressure regulator is designed to supply heat to samples entering instrumentation systems. It can be used to preheat liquids to prevent condensation of gas or to vapouriseliquids prior to gas analysis.
Our Product Solutions
T: 01452 330011 | [email protected] | www.boiswood.co.uk
• Up to 30,000 PSIG Ranges • Combination of Pressure and Temperature • Wide range of connections available • RoHS Compliant
3100 SERIESThin Film Pressure Transducers
The 3100 Series is ideal for OEMs that require consistent high levels of performance, reliability and stability utilising the sputtered thin film technology.
• Up to ±0.07% of Calibrated Span • Up to 413 BAR • Various Outputs and Connections available • Operating Temperatures up to +120°C • ATEX Approved
PAD SERIESDifferential Pressure Transmitters
The PAD series is a micro-processor based high performance transmitter, with flexible calibration and output configurations. Suitable for ATEX applications.
• Up to 600 BAR • 4 – 20 mA Output Signal • Operating Temperatures up to +120°C• ATEX Approved
PAS SERIESStandard Pressure Transmitters
The PAS series is available as a piezo-resistive pressure transmitter capable of measuring gauge and absolute pressures.
Our Product Solutions
T: 01452 330011 | [email protected] | www.boiswood.co.uk
• Available in 100 and 350 BARG pressure ranges• Corrosion, high temperature and broad chemical resistance • NPT Taper Threads as standard • Filtration down to 0.3 Micron
MICRASTEELFiltration – Housing & Elements
The MicraSteel series is a range of high pressure housing manufactured from 316L Stainless Steel, specifically for specialist gas applications
• Full Span Ranges Down to 1 PSI • High Overpressure Option Available on Select Ranges• Compatible w/ a Variety of Gases & Liquids • Operates on Low Cost Unregulated DC Power
MODEL 209 OEM Pressure Transducers
The Model 209 pressure transducer is designed for Industrial and OEM customers who require high performance, reliability and versatility at an affordable price.
• Low Cost and High Accuracy • NEMA4 and IP65 Approved • Corrosive Resistant All Stainless Steel Wetted Parts • Choice of Voltage or Current Output • Compatible with a Wide Range of Gases or Liquids
MODEL 256 Rugged Pressure Transducers
The Model 256 is one of the most rugged and reliable sensors available, design with critical process applications in mind.
Our Product Solutions
T: 01452 330011 | [email protected] | www.boiswood.co.uk
• Available with many materials and connection sizes• Free documentation package including technical sheets, maintenance
instructions, PED, material and test certifications• ATEX Approved
500 SERIESSafety Relief Valves
The 500 Series safety relief valves are fully customisable according to your specifications and application requirements.
• Gauge, Vacuum, Absolute and Compound pressure models are available
• Submersible, General Purpose and Wash Down Enclosures • High Stability Achieved by CVD Sensing Element • Millivolt, Voltage and Current Output models
2200 SERIESIndustrial Pressure Transducers
The 2200 Series features stability and accuracy in a variety of enclosure options. Utilising its CVD technology it’s perfect for rugged applications.
• Available in sizes from DN15 up to DN80 • 16 BAR Nominal Pressure • KVS Values of 16 – 81 m³/h• Up to 300°C• Threaded Version (NV94) available
NV93 SERIESTank Float Valve
The NV93 float valve is a compact stainless steel version designed for installation inside tanks or pipelines. This unit will automatically control liquid levels in sealed or open environments.
Our Product Solutions
T: 01452 330011 | [email protected] | www.boiswood.co.uk
• Standard Accuracy Specification of ±1.5% F.S. • Calibration available for non-standard gases• Optional 3.5 digit LCD display can be integrated • 12 or 24 VDC Power Supply
50 SERIESOEM Gas Mass Flow Sensors
• Vacuum to 10,000 PSIG (690 BAR)• Temperatures ranges from -240°C to +870°C• NPT, SAE or Weld Neck Style available• Exotic Alloy Construction Options • Variety of Sealant Materials
PG SERIESPacking Gland
The PG Series packing glands provide pressure/vacuum sealing for tubes, probes, pipe, cable or any single element assembly (not electrically isolation), including thermocouples, RTDs, probes, capillaries and analyser sample tubes.
• UL Approved Explosion Proof and CSA Listed • 1 to 6 Actuation Levels• Stainless Steel or Brass Mountings• Lengths to over 3.4m (11ft) • Wide range of float materials and switch options
LS-800 SERIESMultiple Point Level Sensor
The LS-800 Series offers a vast range of configuration options and can be designed and built for your specification application.
The 50 Series thermal mass flowmeters are capable of measuring virtually any clean, dry gas as low as 0 – 20 SCCM or up to 500 LPM. Repeatable results are achieved using a patented sensor design, proven to minimise zero drift with fast response and linear outputs.
Related Products
T: 01452 330011 | [email protected] | www.boiswood.co.uk
PRESSURE GAUGESInstrumentation Pressure Gauges for any application.
INSTRUMENTATION VALVESIncluding Ball, Needle, Plug, Check, Gauge, Toggle, Bleed, Purge and Quick Connects.
INSTRUMENTATION FITTINGSA range of single and dual ferrule instrumentation fittings – available from both our Eastern and Western manufacturers.
FLASHBACK ARRESTORS Flashback or Flame arrestors suitable for a number of different aggressive and neutral medias.
BURSTING DISKS A variety of forward and reverse acting bursting disks, individually specified and manufacturer to your requirements.
TUBING, PIPING & HOSES We have a selection of manufacturers able to provide flexible hoses, Stainless Steel or Exotic Alloy tubing and PTFE/PFA piping.
Application Success
T: 01452 330011 | [email protected] | www.boiswood.co.uk
Application Details
The customer is a leader in their industry of designing andbuilding gas analysers. This specific application required 2instrumentation panels in order to connect up multiple gassupplies and distribute throughout the room.
Customer Requirements
2 custom instrumentation panels that would be able to feed inmultiple gas lines, regulate the pressure within the line and shutoff if necessary.
Why Boiswood Was Successful
We offered an all-in-one solution – to procure, supply, assembleand test these panels all in-house at our headquarters. Utilisingmultiple suppliers and the testing facilities at Boiswood we wereable to provide the best engineered solution at a great price.
Application Success
T: 01452 330011 | [email protected] | www.boiswood.co.uk
PR1 Pressure Reducing Regulator 232.30 Full Safety Pattern Gauge
FB Series Ball Valve
Fittings
Custom Mounting Panel
To reduce the pressure and control the flow of gas coming from the external bottle supply
To monitor the pressure passing through the regulator
Designed based on the requirements and machined with customers final approval.
To connect up to theExternal tubing supply
To shut off gas supply to allow changing of bottles or in the eventof an emergency
