+ All Categories
Home > Documents > Oil drum oven for baking

Oil drum oven for baking

Date post: 03-Feb-2022
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
1
Youth & Community Development Agapao International +44 (0)843 506 5005 www.agapao.org [email protected] UK Charity #1122848 Oil Drum Oven for Baking Building an oven using an old, clean metal oil drum (covered in clay or mud) can provide an opportunity to generate an income by baking items to sell. This idea, when perfected, could also generate an income for an engineer and team, by charging a small amount to install them for others. Prepare oil drum: 1) Create a door, using the lid, by adding a hinge on one side. On opposite side add a handle. 2) Create 2 or 3 shelves for inside by cutting sheets of metal to fit width of oil drum. 3) Add metal strips along the length of oil drum inside to hold shelves in place. Prepare site for oven: 1) Place oil drum, in desired place, on ground. Mark the outline and remove. 2) Place bricks or stones along the 2 edges. 3) Dig shallow pit within marked area. Prepare oven: 1) Place oil drum resting on the 2 lines of bricks, over shallow pit. 2) Cover oil drum with thick layer of clay or mud. 3) Light small fire in pit below oven to dry the clay/mud – fill gaps which may appear (The clay will insulate the oven and keep the heat inside – may need repairing as used)
Transcript
Page 1: Oil drum oven for baking

Youth & Community Development

Agapao International +44 (0)843 506 5005 www.agapao.org [email protected] UK Charity #1122848

Oil Drum Oven for Baking Building an oven using an old, clean metal oil drum (covered in clay or mud) can provide an opportunity to generate an income by baking items to sell. This idea, when perfected, could also generate an income for an engineer and team, by charging a small amount to install them for others. Prepare oil drum:

1) Create a door, using the lid, by adding a hinge on one side. On opposite side add a handle. 2) Create 2 or 3 shelves for inside by cutting sheets of metal to fit width of oil drum. 3) Add metal strips along the length of oil drum inside to hold shelves in place.

Prepare site for oven:

1) Place oil drum, in desired place, on ground. Mark the outline and remove. 2) Place bricks or stones along the 2 edges. 3) Dig shallow pit within marked area.

Prepare oven:

1) Place oil drum resting on the 2 lines of bricks, over shallow pit. 2) Cover oil drum with thick layer of clay or mud. 3) Light small fire in pit below oven to dry the clay/mud – fill gaps which may appear (The clay will

insulate the oven and keep the heat inside – may need repairing as used)

Recommended