Oil & Gas ProcessingPresenting Aspentech and John M. Campbell & Co. in Norway

2 3

Increasing well complexity and production at remote

locations, inevitably results in needs for higher

competence. At Maersk Training we recognise this

and have designed our training to meet the challenges

and risks of the working environment.

The specter of Maersk Training is wide. But we believe in

specific training for the needs of different industries and

companies, and for the actual working environment of

people. That is why we have organized the training in

different fields, all staffed by experienced specialist

trainers.

Focusing on oil and gas we are proud to present

our valued cooperation partners Aspentech and John M.

Campbell & Co.

Learn to build process simulations using Aspen HYSYS®.

Understand the capabilities of Aspen Flare System

Analyzer to rigorously model flare systems and

equipment, and develop practical experience through

modeling exercises with Modeling Flare System. Develop

the skills for creating and running dynamic simulations

using Aspen HYSYS® Dynamics. Learn how to solve

dynamic problems and how to transfer steady-state

models to dynamic models.

• Process Modeling using Aspen HYSYS®

• Dynamic Modeling using Aspen HYSYS® Dynamics

• Modeling Flare System with Aspen FLARENET

Maersk Training in corporation with John M. Campbell

& Co. is offering specialist gas processing and gas facilities

training courses. We provide advanced technical

training, for highly skilled employees, and bring real

world experience and competences to suit your demand

for a competent workforce.

• Overview of Gas Processing – Technical (G2)

• Gas Conditioning & Processing (G4)

• Gas Conditioning and Processing Special (G5)

• Oil Production & Processing Facilities (PF4)

• Operator Training for Oil & Gas Processing Facilities

(OT1)

We bring technical oil & gas processing training closer to our customer

”a better learning experience” says it all.

We deliver knowledge and learning, thus increasing

work performance, effectivity and business potential,

while decreasing risk of incidents and cost.

4 54 5

EHY101 Aspen HYSYS: Process ModellingDurAtiOn: 3 days

LEvEL: Introductory

Learn to build process simulations

using Aspen HYSYS. Discover how

Aspen HYSYS allows rapid flowsheet

construction and bi-directional

calculations. Investigate how

templates and subflowsheets can

streamline and organize simulation

efforts. Learn how to do preliminary

cost estimation using Aspen Process

Economic Analyzer from the Aspen

HYSYS Environment.

EHY2511 Flare network Design and rating

EHY221 Aspen HYSYS Dynamics: Dynamic Modelling

DurAtiOn: 2 days

LEvEL: Intermediate

Understand the capabilities of Aspen

Flare System Analyzer to rigorously

model flare systems and equipment,

and develop practical experience

through modelling exercises.

Enables the attendees to develop

flare network models for convergent,

divergent and looped systems.

DurAtiOn: 2 days

LEvEL: Intermediate

Develop the skills for creating and

running dynamic simulations using

Aspen HYSYS Dynamics. Learn how

to solve dynamic problems and how

to transfer steady-state models

to dynamic models. Discover

techniques and “rules of thumb” for

controller tuning. See how different

control strategies can handle

different types of disturbances and

how capacitance and dead-time

affect controllability.

Aspentech training

Operator training for Oil & Gas Processing Facilities - Ot1

Oil Production and Processing Facilities - PF4

LEvEL: Basic

DiSciPLinE: Operator Training

DurAtiOn: 5 Days

ABOut tHE cOurSE

This course will provide the basic

knowledge required for

understanding processes and

operating issues in typical North

Sea production facilities. The course

is designed for Production operators

and other non-engineering

personnel requiring a broad

introduction to production facilities

and processes, including the

separation, conditioning and

disposition of produced oil, gas and

water; including the common

operational difficulties that may

arise, as well as the operational

tactics used to resolve them.

LEvEL: Foundation

DiSciPLinE: Process Facilities

DurAtiOn: 10 Days

ABOut tHE cOurSE

The emphasis of this course is on

oil production facilities – from the

wellhead to the delivery of a

specification crude oil product to

the refinery. Both onshore and

offshore facilities will be discussed.

Produced water treating and water

injection systems are also covered.

Solution gas handling processes and

equipment will be discussed as well,

though at a relatively high level. In

addition to the engineering aspects

of oil production facilities, practical

operating problems will also be

covered including emulsion

treatment, sand handling, dealing

with wax and asphaltenes, etc.

Exercises requiring calculations are

utilized throughout the course.

The course is intended to be comple-

mentary to the G4 Gas Conditioning

and Processing course which is

focused on the gas handling side of

the upstream oil and gas facilities

area.

Overview of Gas Processing - technical - G2

Gas conditioning and Processing - G4

Gas conditioning and Processing - Special - G5

LEvEL: Basic

DiSciPLinE: Gas Processing

DurAtiOn: 3 Days

G2 is a versatile overview of the gas

conditioning and processing industry

based on highly condensed material

from Campbell’s G4 and G6 courses.

As a wide ranging overview, it is

suitable for “interested parties” more

so than direct practitioners, such as

geologists, reservoir engineers, line

managers, sales and business

development staff, related specialists

such as environmental staff,

operational staff, shift foremen,

or those new to the industry such

as entry-level engineers, as well as

anyone interested in a general,

technically oriented overview of

the gas processing industry.

LEvEL: Foundation

DiSciPLinE: Gas Processing

DurAtiOn: 10 Days

The “Campbell Gas Course™” has been

the standard of the industry for forty

years. Over 30,000 engineers have

attended our G4 program, considered

by many to be the most practical and

comprehensive course in the oil and

gas industry. Both hand-methods and

computer-aided analysis are used

to examine sensitivities of technical

decisions. To enhance the learning

process, about 30 problems will be

assigned, reviewed and discussed

throughout the course.

LEvEL: Intermediate

DiSciPLinE: Gas Processing

DurAtiOn: 5 Days

The course has been designed to

cover topics from the 10 day G4

course in an accelerated 5-day format

using a commercial simulator to

perform calculations. A basic working

knowledge of the commercial

process simulation package being

used will provide the best oppor-

tunity to achieve the learning

objectives of this course. Volumes 1

and 2 of the John M. Campbell text

books, Gas Conditioning and

Processing, are used as the basis for

the material presented in this course.

A comprehensive course exercise

based on a typical gas processing

facility which can be applied to either

onshore or offshore facilities is used

for this course. The problem is

developed in stages, as the material is

covered, using a commercial

simulator package (typically

Promax® or UNISIM®). At the

completion of the course the

participant will have developed

a process simulation model that

includes a dew point control

process, a mechanical refrigeration

process with economizers, hydrate

inhibition using MEG, gas

dehydration using TEG, and liquid

product stabilization with recycle.

John M. campbell & co training

6 7

Maersk training norway ASLuramyrveien 234313 SandnesNorway Tel: +47 51 96 19 20norway@maersktraining.comwww.maersktraining.no