Oilquip

Date post:14-Apr-2018
Category:
View:220 times
Download:0 times
Share this document with a friend
Transcript:
  • 7/27/2019 Oilquip Brochure.pdf

    1/30

    Product Brochure

    Manufacturers and Stockists of High Pressure Pipeline and Drilling Equipment

  • 7/27/2019 Oilquip Brochure.pdf

    2/30

    Contents

    Click on a product catergory to navigate directly to that section:

    1. API Connections

    2. Hammer Lug Union

    3. Manifold Fittings

    4. High Pressure Couplings & Hoses

    5. API 6A Valves

    6. High Pressure Seamless Pipe

    7. Turnkey Manifold

  • 7/27/2019 Oilquip Brochure.pdf

    3/30

    1. API Connections

    Back toContents Page

  • 7/27/2019 Oilquip Brochure.pdf

    4/30

    1. API Connections

    1.1

    API Flanges

    Oilquip offer a large range of API 6A and ANSI

    forged swivel flanges, Blind flanges, slip-on

    flanges and weld-neck flanges in 4130 carbon

    steel, to suit 2 to 6 nominal bore XXS pipe with

    pressure rating below. The API 6A specification

    requires a rigorous and unique quality system

    including stringent dimensional and NDT control.

    The application of an API monogram is that you,

    the client will be guaranteed of total compliance

    with the API specifications.

    Max. Working Pressure 2,000 PSI 3,000 PSI 5,000 PSI 10,000 PSI 15,000 PSI 20,000 PSI

    Test Pressure 3,000 PSI 4,500 PSI 7,500 PSI 15,000 PSI 22,500 PSI 30,000 PSI

    Product Specification Levels 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4

    K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg

    API Temper atu re Rat ing To To To To To To

    Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C)

    Integral, Blind, Target Blind & Test Flanges

    Min. Yield 60,000 PSI 60,000 PSI 60,000 PSI 60,000 PSI 75,000 PSI 75,000 PSI

    Min. Tensile 85,000 PSI 85,000 PSI 85,000 PSI 85,000 PSI 95,000 PSI 95,000 PSI

    Material API 60K API 60K API 60K API 60K API 75K API 75K

    Weld Neck Flanges

    Min. Yield 45,000 PSI 45,000 PSI 45,000 PSI 60,000 PSI 75,000 PSI 75,000 PSI

    Min. Tensile 70,000 PSI 70,000 PSI 70,000 PSI 85,000 PSI 95,000 PSI 95,000 PSI

    Material API 45K API 45K API 45K API 60K API 75K API 75K

  • 7/27/2019 Oilquip Brochure.pdf

    5/30

    1. API Connections

    1.2

    Studed Blocks

    Flanged studded crosses and tees are available from 2 through to 6 with pressure

    ratings of 5,000 psi and 10,000 psi in AISI 4130 material.

    Hub & Clamp Connector

    The Oilquip connector is a compact mechanical joint consisting of four basic elements:-

    hubs, seal ring, clamps and bolting. During assembly the hubs are pulled together

    under the twin wedge action of the clamp segments, the sealing action is improved due

    to internal pressure. Each connector requires only four bolts, which includes a 100%

    safety/redundancy factor. The ability of the clamp connector to withstand severe bending

    without leakage or periodic re-tightening, has been recognised for many years in the

    Offshore Industry. All materials are AISI 4130- carbon steel and meet the requirements

    of NACE with the following pressure ratings. The particular advantage of the connector

    is its ability to be disconnected quickly and avoid hot work on site.

    Max Working Pressure 2,000 PSI 3,000 PSI 5,000 PSI 10,000 PSI 15,000 PSI 20,000 PSI

    Test Pressure 3,000 PSI 4,500 PSI 7,500 PSI 15,000 PSI 22,500 PSI 30,000 PSI

    Production Spec Levels 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4

    K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C) K (-60 Deg C)

    API Temperature Rat ing To To To To To To

    Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C) Y (+345 Deg C)

    Min. Yield 60,000 PSI 60,000 PSI 60,000 PSI 60,000 PSI 75,000 PSI 75,000 PSI

    Min. Tensile 85,000 PSI 85,000 PSI 85,000 PSI 85,000 PSI 95,000 PSI 95,000 PSI

    Material API 60K API 60K API 60K API 60K API 75K API 75K

  • 7/27/2019 Oilquip Brochure.pdf

    6/30

    2. Hammer Lug Union

    Back toContents Page

  • 7/27/2019 Oilquip Brochure.pdf

    7/30

    2. Hammer Lug Union

    2.1

    A fu ll range of Hammer lug unions

    are available upon request from

    threaded Fig 200 unions through to

    Butt Weld Fig 2202 unions and are

    briefly explained as follows:

    Threaded Unions

    We offer various sizes of API Line

    Pipe Threaded Unions. The Threads

    are gauged with calibrated working

    API gauges, which are inspected

    regularly with API master gauges.

    Butt Welded Unions

    Hammer Lug Unions are available in all Fig. numbers as Butt Weld Unions as an

    alternative to the standard API threaded end. We mostly specialise in the highpressure

    unions described below. When ordering please state the required pipe schedule.

    Hammer Lug Unions are available in Hydrogen Sulphide trim (Sour Gas H2S) with

    either Threaded or Butt weld ends. Sour Gas Unions are manufactured in accordance

    with NACE Standard MR-01-75. For ease of identification Sour Gas Unions are painted

    green.

    Figure 1002

    Recommended Service for the 1002 are Cementing, testing, and choke-and-kill lines

    with 10,000 psi (690bar) cold working pressure on 4 sizes and 7,500 psi (517 bar) cold

    working pressures on 5 and 6 sizes. The main features of these unions are that they

    have a replaceable lip type primary seal, which protects the secondary metal to metal

    seal, and minimises the flow turbulence. Both Butt-weld and Threaded connections are

    available. The Unions are also available for sour gas service: 7,500 psi (517 bar) cold

    working pressure.

    Figure 1502

    Recommended Service for the 1502 are Cementing, testing, and choke-and-kill lines

    with 15,000 psi (1034bar) cold working pressure. The main features of these unions

    are that they have a replaceable lip type primary seal, that protects the secondary

    metal to metal seal, and minimises the flow turbulence. Both Butt-weld and Threaded

    connections are available. The Unions are also available for sour gas service: 10,000

    psi (690 bar) cold working pressure, butt-weld configurations only.

  • 7/27/2019 Oilquip Brochure.pdf

    8/30

    2. Hammer Lug Union

    2.2

    Figure 2002

    Recommended Service for the 2002 are Cementing, testing, and choke-and-kill lines

    with 20,000 psi (1380bar) cold working pressure. The main features of these unions are

    that they have a replaceable lip type primary seal, that protects the secondary metal to

    metal seal, and minimises the flow turbulence, Butt-weld connections only.

    Hammer Lug Unions are available in a range of figure numbers for use with the following

    pressure ratings and services:

    Figure No 100 200 206 400 602 1002/1004* 1003 1502 2202

    Standard Service

    Max Working Pressure 1,000 PSI 2,000 PSI 2,000 PSI 4,000 PSI 6,000 PSI 10,000 PSI 10,000 PSI 15,000 PSI N/A

    Max Test Pressure 1,500 PSI 3,000 PSI 3,000 PSI 6,000 PSI 9,000 PSI 15,000 PSI 15,000 PSI 22,500 PSI N/A

    Sub - Sub - Sub - Sub - Sub - Sub - Sub - Sub - N/A

    Yellow Grey Grey Red Orange Blue Green Red

    Nut - Nut - Nut - Nut - Nut - Nut - Nut - Nut - N/A

    Black Blue Blue Black Black Red Black Blue

    Sour Service

    Max Working Pressure N/A N/A N/A 4,000 PSI 6,000 PSI 7,500 PSI 7,500 PSI 10,000 PSI 15,000 PSI

    Max Test Pressure N/A N/A N/A 6,000 PSI 9,000 PSI 11,250 PSI 11,250 PSI 15,000 PSI 22,500 PSI

    N/A N/A N/A Sub - Sub - Sub - Sub - Sub - Sub -

    Green Green Green Green Green Green

    N/A N/A N/A Nut - Nut - Nut - Nut - Nut - Nut -

    Green Green Green Green Green Green

    Colour Code

    Colour Code

  • 7/27/2019 Oilquip Brochure.pdf

    9/30

    3. Manifold Fittings

    Back toContents Page

  • 7/27/2019 Oilquip Brochure.pdf

    10/30

  • 7/27/2019 Oilquip Brochure.pdf

    11/30

    FULL FLOW CROSS

    DSIZE

    APPROXWEIGHT (Kg)

    A B R

    LOW SWEEP TEE

    DSIZE

    APPROXWEIGHT (Kg)

    A B R

    90 LONG SWEEP ELBOW

    DSIZE

    APPROXWEIGHT (Kg)

    A R C

    90 3D DOUBLE BACKED BEND

    DSIZE

    APPROXWEIGHT (Kg)

    A R C

    STANDPIPE GOOSNECK 160 C/W TOP OUTLET

    DSIZE

    APPROXWEIGHT (Kg)

    A B R

    FULL FLOW TEE

    DSIZE

    APPROXWEIGHT (Kg)

    A B R

    LONG SWEEP TEE C/W INTEGRAL BULL PLUG

    DSIZE

    APPROXWEIGHT (Kg)

    A B R

    45 LONG SWEEP ELBOW

    DSIZE

    APPROXWEIGHT (Kg)

    B R C

    45 3D DOUBLE BACKED BEND

    DSIZE

    APPROXWEIGHT (Kg)

    B R C

    STANDPIPE GOOSNECK 160 C/W INTEGRAL BULL PLUG

    DSIZE

    APPROXWEIGHT (Kg)

    A B R

    3. Manifold Fittings

    3.2

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    2

    3

    4

    5

    6

    60.3

    88.9

    114.3

    141.3

    168.3

    60.3

    88.9

    114.3

    141.3

    168.3

    60.3

    88.9

    114.3

    141.3

    168.3

    60.3

    88.9

    114.3

    141.3

    168.3

    60.3

    88.9

    114.3

    141.3

    168.3

    60.3

    88.9

    114.3

    141.3

    168.3

    60.3

    88.9

    114.3

    141.3

    168.3

    60.3

    88.9

    114.3

Embed Size (px)
Recommended