OKUMA LIVE & STATIC TOOLING
LB EX AND GENOS SERIES LATHES
OKUMA GENOS SERIESGENOS L-200M, GENOS L-300M
CAPTAIN L370-M, L370-MW, L470-M
OKUMA LB EX SERIESLB2000EX, LB2500EX, LB3000EX,
LU3000EX, LB4000EX, GENOS L300-MW
CAT2015-OK-LBEX-CAP SPETEMBER 2017
847-367-4800www.lyndexnikken.com
2
Special Live Tool Inquiry Form Fax: (847) 367-4815 Email: [email protected]
Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com and complete the form online. Lyndex-Nikken engineers will help you to determine the best live tool for your application.
Please specify design configuration:
Please specify holding system and cutting tool specifications:
Standard: 1) straight 2) 90º (reducer/speeder)
Offset Multi Output: 1) straight 2) 90°
Offset: 1) straight 2) 90°
Adjustable Y straight
Saw Blade Holder: 1) straight 2) 90°
Adjustable Angle
Multi Output: 1) straight 2) 90°
Fixed Angle
Company Name
AddressZip CityPhone E-mail
Holding System
Preferred type of holding system (ER, Shrink Fit, Shell Mill Arbor, etc.):
Application and Cutting Tool Specifications
Type of material:
Type and nature of application (milling, drilling, reaming, splitting, etc.):
Size of cutter (diameter): Overall length of cutter:
Flute length: Requested RPM: Requested torque:
Coolant Requirements
External/Internal: Requested pressure capabilities:
Number of nozzle ports: Coolant pipe design or configuration specifications:
Turn Your Okuma Lathe into a Precision Profit CenterAs a member of Partners in THINC, we work hand in hand with Okuma engineers at the Partners in THINC facility in Charlotte, NC. Not only are our live tools custom-engineered specifically for Okuma lathes, but also they are optimal application solutions based on collaborative engineering.
Lyndex-Nikken live tooling offers the latest technology you can expect for turning operations. Designed and manufactured directly with Okuma engineers in Japan, our live tools have features and benefits unmatched by the competition. Gears, bearings, seals, every part is built to provide the highest accuracy, rigidity and stability.
With more than 35 years of tooling engineering and manufacturing experience, Lyndex-Nikken live tooling will maximize the capabilities of your machine, and keep you far ahead of the global competition. We understand that exceptional quality is key to your business. Let the manufacturers who share your philosophy in producing live tools join you in doing what you do best - machining the highest quality parts.
Enhanced with Lyndex-Nikken live tooling, your Okuma machine will allow you to reduce cycle times, eliminate extra operations and achieve maximum efficiency.
Lyndex-Nikken is an official Okuma Live Tool supplier and a member of Partners in THINC.
847-367-4800www.lyndexnikken.com
3
Table of Contents
OKUMA L IVE & STATIC TOOLING
SpecialsCustom-made live tools can be engineered for your specific application. Please direct your request to our office (see special live tool inquiry form). Our engineering staff is ready to assist you with your specific tooling needs.
Special Live Tool Inquiry Form 2
Table of Contents 3
Live & Static Tooling for okuma Lathes 4
Features and Technology 5
Live Tools for Okuma LB2000/2500/3000EX, LU3000EX, Genos L300-MW Series 6-7
Static Tools for Okuma LB2000/2500/3000EX, LU3000EX, Genos L300-MW Series 8-18
Live Tools for Okuma LB4000EX Series 19
Static Tools for Okuma LB4000EX Series 20-24
Live Tools for Okuma Genos L200-M 25-26
Live Tools for Okuma Captain Series L370-M and Genos L300-M 27-29
Live Tools for Okuma Captain Series L370-M 30-31
Live Tools for Okuma Captain Series L470-M 32-34
Lyndex-Nikken VDI30 Static Tool Holders 35-36
Lyndex-Nikken VDI40 Static Tool Holders 37-38
ER Series Collets and Tap Collets 39-42
Wrench Usage, Warranty and Service 43
Torque Wrench 44
847-367-4800www.lyndexnikken.com
4
Part numbering structure for Live Tools
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
OK EX • E R 2 5 X • MS • C
Machine Make Machine Model•
Tool Nose/Output Axis•
Style•
Coolant
OK EX ER25 X MS C
OK OKUMA
EX LB2000-3000EX ER20 ER20 X MS Main Sub Opposite
EX GENOS L300-MW ER25 ER25 X MSD Main & Sub Spindle, 4 Output
E4 LB4000EX ER32 ER32 X, Z MST Main & Sub Spindle, 6 Output
L2 GENOS L200-M ER40 ER40 Z MSQ Main & Sub Spindle, 8 Output
L3 L370-M, MW, GENOS L300-M BG10 BORING 1” MD Main Spindle, 2 Output
L4 L470-M BG12 BORING 1.1/4” OFF Offset
BG15 BORING 1/1/2” AD Adjustable
ID75 FACE TURNING 3/4” SUB Sub Spindle
ID10 FACE TURNING 1.00”
OD10 OD TURNING 1.00”
Live Tooling & Static for Okuma Lathes
Commonly Referenced: Radial Live Tools Straight Live Tools X-Axis Live Tools
Commonly Referenced: Axial Live Tools 90 or Angle Live Tools Z-Axis Live Tools
Commonly Referenced: Axial Live Tools Straight Live Tools Z-Axis Live Tools
Commonly Referenced: Radial Live Tools 90 or Angle Live Tools X-Axis Live Tools
Okuma Bolt Mount Turret (BMT)Parts inventory, maintenance and repair, and rebuild services are available through Lyndex-Nikken
Okuma Face Mount Turret (VDI)Parts inventory, maintenance and repair, and rebuild services are available through Lyndex-Nikken
• LB2000EX• LB2500EX• LB3000EX
• GENOS L-200M• GENOS L-300M
• LU3000EX• LB4000EX• GENOS L300-MW
• L370-M• L370-MW• L470-M
847-367-4800www.lyndexnikken.com
5
Live Tooling & Static for Okuma Lathes
Features and TechnologyAs an authorized OEM supplier to Okuma, Lyndex-Nikken live tools are designed and manufactured in conjunction with Okuma engineers at the factory in Japan.
Protective Seals Gears for Stability
Eccentric Bearing Nut Tool Design and Engineering
• Labyrinth Seals - provide a high-pressure multi-barrier construction that prevents contaminants and coolant from entering the main chamber.
• Gear Pairing - hand-matched for each pair to minimize backlash.
• Gear Design - custom ground spiral bevel gear tooth design maximizes drive torque output and reduces tooth root stress allowing for more tool longevity.
• Gear Equilibrium - placement of bearings balance torque stress evenly through input/output shafts.
• Tool Body - manufactured from the highest tensile and compression Nickel Chrome Molybdenum alloys.
• Drive Shafts - all features are ground on both the input and output Chrome Molybdenum drive shafts to assure proper torque transmission and precision concentricity.
• Bearing Quality - only the highest precision ABEC 7 angular contact bearings are used for smooth and high speed rotation.
• Quality Control - all live tools go through a vigorous 60-point final inspection to satisfy the highest expectations of live tool performance.
• Ground Eccentric Nut - allows for fine accuracy and strong tool shank gripping capacity by preventing collet twisting or rocking. • Runout - guarantee of under 5-micron repeatability at collet nose.
847-367-4800www.lyndexnikken.com
6
Clockwise Output
Clockwise Input
Clockwise Input
Clockwise Output
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Live Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size Replacement Nut Coolant Nozzle Wrench for Nut
Wrench for Spindle
External1000 PSI Max Pressure
Radial 6000 1:129.3 ft-lbs (40N-m)
ER32(0.078-0.787”)
NA32 HI103-37110 FK-8 FK-9
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size Replacement Nut Coolant Nozzle Wrench for Nut
Wrench for Spindle
Internal1000 PSI Max Pressure
Radial 6500 1:159.0 ft-lbs (80N-m)
ER32(0.078-0.787”)
NUT-ER32I-C N/A WRENCH-ER32I WRENCH-MIM-107642
2.55965
582.
283
100.
394
602.
362
130.512
491.929
1.02426
1.96
950
48.501.909
48.501.90913
0.51
2
1.96
950
Part #: OKEX-ER32X-ICEOD Drill/Milling Unit
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
0.39
4
2.63836
51
1.417
60
671.024
2.36
2
26
10 2.00
8
281.102
501.
969
1.96
950
48.501.9091.909
48.50 130.
512
Unit: mm [inch]
LN Part # (old): OKA00-19000Okuma Reference #: T129-530-002-75-2
LN Part # (old): OKEX-ER32X-C-7MP-MIM
Part #: OKEX-ER32XOD Drill/Milling Unit
Unit: mm [inch]
847-367-4800www.lyndexnikken.com
7
LB20
00/2
500/
3000
EX
LU30
00EX
/GEN
OS L
300-
MW
Okuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Live Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Clockwise Output
Clockwise Output
Clockwise Output
Clockwise Input
Clockwise Input
Clockwise Input
106
[4.1
73]
50[1.969][1.969]
50
51[2.008]
0.39
410
37
[2.3
62]
60
4270
[2.756][0.787]
20[1.654]
[1.457]
52[2
.047
]
LN Part # (old): OKA00-20000Okuma Reference #: T129-530-003-08-1Part #: OKEX-ER32Z
Face Drill/Milling Unit
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Unit: mm [inch]
On the main spindle, the clutch shaft and the collet shaft rotate in the same direction; on the sub spindle, they rotate in opposite directions. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit.
External or Internal Coolant
Radial/Axial
Max.RPM Gear Ratio Max. Torque
Output Collet Size Replacement Nut Coolant Nozzle Wrench for Nut Wrench for Spindle
External1000 PSI Max Pressure Double 6000 1:1
29.3 ft-lbs (40N-m)
ER32 (1/8” to 25/32”)
NA32 HI103-37110 FK-8 FK-9
External or Internal Coolant
Radial/Axial
Max.RPM Gear Ratio Max. Torque
Output Collet Size Replacement Nut Coolant Nozzle Wrench for Nut Wrench for Spindle
Internal1000 PSI Max Pressure
Axial 6500 1:1 36.9ft-lbs (50N-m)ER32
(0.078-0.787”)NUT-ER32I-C N/A WRENCH-ER32I WRENCH-MIM-107642
37[1.457]
[2.3
62]
60[0
.394
]10
[0.787]20
[1.654]42
[2.756]70
106
[4.1
73]
50[1.969]
[4.1
73]
106
[2.008]51
50[1.969]
[2.5
98]
66
1.53539
84.5
03.
327
2.75670
1.92949
602.36
2
10[0
.394
]
0.51213
[1.969]50 50
[1.969]
[2.283]58
Unit: mm [inch]
Unit: mm [inch]
LN Part # (old): OKA00-21001
LN Part # (old): OKEX-ER32Z-C-7MP-MIM
Part #: OKEX-ER32Z-MS
Part #: OKEX-ER32Z-ICE
Twin Spindle Drill/Milling Unit
Face Drill/Milling Unit
External or Internal Coolant
Radial/Axial
Max.RPM Gear Ratio Max. Torque
Output Collet Size Replacement Nut Coolant Nozzle Wrench for Nut Wrench for Spindle
External1000 PSI Max Pressure Axial 6000 1:1
29.3 ft-lbs (40N-m)
ER32(0.078-0.787”)
NA32 HI103-37110 FK-8 FK-9
847-367-4800www.lyndexnikken.com
8
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum Internal Pressure
Boring Bar Holder (1.25”) Bolt 1.25” (31.75mm) 1000 PSI
Boring Bar Holder (32mm) Bolt 1.26” (32.00mm) 1000 PSI
66.502.618
501.969
47.5
01.
870
47.5
01.
870
903.543
[1.260]32.00
thru tool coolant ports
31.75
702.
756
1.250
250.984
863.386
458
1.77
20.
315
50.197
Unit: mm [inch]
LN Part # (old): OK126-41000Part #: OKEX-BG12Z-C OKEX-BG32MZ-C
Boring Bar Holder (1.25” and 32mm)
Description Interface Output Size Maximum External Pressure
Boring Bar Holder (1.25”) Bolt 1.25” (31.75mm) 1000 PSI
47.5
01.
870
47.5
01.
870
66.502.618
501.969
903.543
752.953
31.7
5
1.25
0
2.75
670
250.984
0.31
51.
772
845
50.197
Unit: mm [inch]
LN Part # (old): OK126-40000Part #: OKEX-BG12ZBoring Bar Holder (1.25”)
INTERNAL COOLANT
9
LB20
00/2
500/
3000
EX
LU30
00EX
/GEN
OS L
300-
MW
Don’t forget to cover open turrets with this part: OKEX-PLUG
847-367-4800www.lyndexnikken.com Okuma LB2000EX, LB2500EX, LB3000EX and Genos L300-MW Series - Static Tools
Description Interface Output Size Maximum Internal Pressure
Boring Bar Holder (1.25”) 4 Output Bolt 1.25” (31.75mm) x4 1000 PSI
25421.
654
0.1975
0.70918
0.31
542
81.
654
0.98
4
80.
315
0.984
31.751.250
1.89048
2.00851 25
702.
756
702.
756
1254.921
953.
740
Unit: mm [inch]
Part #: OKEX-BG12Z-MSD-CBoring Bar Holder (1.25”) 4 Output
Description Interface Output Size Maximum Pressure
Boring Bar Holder (1.25”) 2 Output Bolt 1.25” (31.75mm) x2 1000 PSI (Internal)
Boring Bar Holder (1.50”) 2 Output Bolt 1.50” (38.1mm) x2 1000 PSI (External)
250.984
481.890
70 1.25
0
2.75
6
2.00851
31.7
5
953.
740
180.709
1013.976
95[ 3.740 ]
450.31
5
81.5
0
8
3.20
9
1.77
2
50.197
702.
756
4.587116.50
81.503.209
[1.5
00]
38.1
24[ 0.945 ]
Unit: mm [inch]
Part #: OKEX-BG12Z-MD-C OKEX-BG15Z-MD
Boring Bar Holder (1.25” and 1.5”) 2 OutputOKEX-BG12Z-MD-C INTERNAL COOLANT THRUOKEX-BG15Z-MD EXTERNAL COOLANT ONLY
847-367-4800www.lyndexnikken.com
10
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum External Pressure
Boring Bar Holder (1”) 8 Output Bolt 1” (25.4mm) x8 1000 PSI
632.
480
632.
480
X 4 Plcs
1.37
835
1.77245
3.937100
1.37
835
25.401.000
4.587116.50
3.70
194
943.701
0.74
80.
748
19
170.
669
170.
669
0.86
6
0.197
22
19
5
1194.685
Unit: mm [inch]
Part #: OKEX-BG10Z-MSQBoring Bar Holder (1”) 8 Output
Description Interface Output Size Maximum External Pressure
Boring Bar Holder (1”) 6 Output Bolt 1” (25.4mm) x6 1000 PSI
1.299
25.4
0
33
1.00
0
1.61441
1.29933 17
0.669
702.
756
953.
740
702.
756
116.504.587
44.5
0
0.197
0.74
819
0.66
917
0.74
819
0.66
9
1.75
2
17
5
180.709
Unit: mm [inch]
Part #: OKEX-BG10Z-MSTBoring Bar Holder (1”) 6 Output
847-367-4800www.lyndexnikken.com
11
LB20
00/2
500/
3000
EX
LU30
00EX
/GEN
OS L
300-
MW
Okuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum Internal Pressure
Boring Bar Holder (1.5”) Bolt 1.5” (38.10mm) 1000 PSI
Boring Bar Holder (40mm) Bolt 1.575” (40.00mm) 1000 PSI
66.502.618
501.969
903.543
[1.575]40.00
thru tool coolant ports
2.75
6
29
70
1.142
38.101.500 47
.50
1.87
0
3.70194
47.5
01.
870
0.45
3
0.1975
11.5
045
1.77
2
Unit: mm [inch]
LN Part # (old): OK126-51000Part #: OKEX-BG15Z-C OKEX-BG40MZ-C
Boring Bar Holder (1.5” and 40mm)
Description Interface Output Size Maximum External Pressure
Boring Bar Holder (1.5”) Bolt 1.5” (38.10mm) 1000 PSI
291.142
2.75
670
38.1
0
1.50
0
501.969
3.26883
1.87
047
.50
1.87
047
.50
66.502.618
0.197
3.54390
1.77
245
5
11.5
00.
453
Unit: mm [inch]
LN Part # (old): OK126-50000 Part #: OKEX-BG15ZBoring Bar Holder (1.5”)
INTERNAL COOLANT
847-367-4800www.lyndexnikken.com
12
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum Internal Pressure
Boring Bar Holder (1.5”) Main & Sub Bolt 1.5” (38.10mm) 1000 PSI
0.39
4
0.197
4510
1.77
21.
339
45 34
1.77
20.
394
10
5
180.709
38.101.500
2.16555
2.16555 29
1.142
542.126
893.504
2.75
670
4.980126.50
953.
740
1335.236
562.205
Unit: mm [inch]
Part #: OKEX-BG15Z-MS-CBoring Bar Holder (1.5”) Main & Sub
Description Interface Output Size Maximum External Pressure
Boring Bar Holder (1.5”) Main & Sub Bolt 1.5” (38.10mm) 1000 PSI
Boring Bar Holder (1.5”) Main & SubPart #: OKEX-BG15Z-MS
38.101.500
2.16555
2.16555 29
1.142
542.126
0.39
4
180.709
0.1975
451.
772
10
1.77
20.
394
1.10
245 28
10
6.50
0.25
6
702.
756
562.205
4.980126.50
3.74
095
3.24882.50
1335.236
Unit: mm [inch]
847-367-4800www.lyndexnikken.com
13
LB20
00/2
500/
3000
EX
LU30
00EX
/GEN
OS L
300-
MW
Okuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (1”) Bolt 1” (25.40mm) 1000 PSI
OD Cutting Holder (25mm) Bolt 0.984” (25.00mm) 1000 PSI
[.984
]25
.00
25.0
0[.9
84]
[.984
]25
.00
[.984]25.00
[.984
]25
.00
25.4
01.
000
1.00
025
.40
803.150
1.00025.40
2.99276
1.96950
1.87
047
.50
47.5
01.
870
25.4
01.
000
25.4
01.
000
562.
205
0.1975
1.339
702.
756
34
411.614
Unit: mm [inch]
Part #: OKEX-OD10X OKEX-OD25MX
OD Cutting Holder (1” and 25mm)
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (3/4”) Bolt 3/4” (19.05mm) 1000 PSI
OD Cutting Holder (20mm) Bolt 0.787” (20.00mm) 1000 PSI56
1.61441
652.
559
34
2.20
5
1.339
50.197
19.0
50.
750
0.75
0 1.87
0
2.79571 50
47.5
0
1.969
19.0
5
1.87
047
.50
19.050.750
0.75
00.
750
19.0
519
.05
803.150
[.787
]20
.00
[.787
]20
.00
[.787
]20
.00
20.00[.787]
[.787
]20
.00
Unit: mm [inch]
Part #: OKEX-OD75X OKEX-OD20MX
OD Cutting Holder (3/4” and 20mm)
847-367-4800www.lyndexnikken.com
14
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (1”) Main & Sub Bolt 1” (25.40mm) 1000 PSI
OD Cutting Holder (25mm) Main & Sub Bolt 0.984” (25.00mm) 1000 PSI
25.4
0
1.87
047
.50
2.99276 76
1.00
0
2.992
1.00
025
.40
1.00
025
.40
1.00
025
.40
25.401.000
[.984
]25
.00
25.00[.984]
25.0
0[.9
84]
25.0
0[.9
84]
25.0
0[.9
84]
25.0
0[.9
84]
[.984
]25
.00
943.
701
2.95375
25.4
01.
000
25.4
01.
000
0.19
75
752.
953
Unit: mm [inch]
Part #: OKEX-OD10X-MS OKEX-OD25MX-MS
OD Cutting Holder (1” and 25mm) Main & Sub
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (3/4”) Main & Sub Bolt 3/4” (19.05mm) 1000 PSI
OD Cutting Holder (20mm) Main & Sub Bolt 0.787” (20.00mm) 1000 PSI
[.787]20.00
[.787
]20
.00
[.787
]20
.00
[.787]20.00
[.787
]20
.00
752.
953
50.
197
0.75
00.
750
19.0
575.402.969
19.0
5
953.
740
762.992
0.75
0
76
1.87
047
.50
19.050.750
2.992
19.0
5
19.050.750
Unit: mm [inch]
Part #: OKEX-OD75X-MS OKEX-OD20MX-MS
OD Cutting Holder (3/4” and 20mm) Main & Sub
847-367-4800www.lyndexnikken.com
15
LB20
00/2
500/
3000
EX
LU30
00EX
/GEN
OS L
300-
MW
Okuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (3/4”) 4 Output Bolt3/4” (19.05mm) x4
0.787” (20.00mm) x4 1000 PSI
953.
740
752.953
0.19
75
0.98
425
0.31
58
0.98
425
100.394
0.39
410
2.79571
2.79571
47.5
01.
870
0.39
410
210.
827
0.82
721
200.787
Unit: mm [inch]
Part #: OKEX-OD75X-MSDOD Cutting Holder (3/4” and 20mm) 4 Output
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (3/4”) 2 Output Bolt3/4” (19.05mm) x2
0.787” (20.00mm) x2 1000 PSI
10
1.969500.
394
0.39
4
210.
827
47.5
01.
870
10
2.79571
0.82
721
200.787
2.95375
953.
740
250.
197
1.33
9
59
34
2.323
0.98
40.
984
80.
315
525
622.441
Unit: mm [inch]
Part #: OKEX-OD75X-MDOD Cutting Holder (3/4” and 20mm) 2 Output
847-367-4800www.lyndexnikken.com
16
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (1”) Bolt 1” (25.40mm) 1000 PSI
ID Cutting Holder (25mm) Bolt 0.984” (25.00mm) 1000 PSI
[.984
]
25
2.992
953.
740
1.00
0
1.96950
25.4
0
76
47.5
01.
870
[.984
]
25
[.984] 25
25.40
371.457
1.000
25.4
01.
000
2.12654
722.835
361.
417
0.19
75
341.
339
Unit: mm [inch]
Part #: OKEX-ID10Z OKEX-ID25MZ
ID Cutting Holder (1” and 25mm)
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (3/4”) Bolt 3/4” (19.05mm) 1000 PSI
ID Cutting Holder (20mm) Bolt 0.787” (20.00mm) 1000 PSI
19.05
1.41736
0.750
19.0
50.
750
1.33
934
0.19
7
552.165
5
662.598
[.787]20.00
[.787
]20
.00
[.787
]20
.00
[.787
]20
.00
2.79550
47.5
0
19.0
50.
750 1.
870
1.87
0
71
47.5
0
1.969
19.0
50.
750
Unit: mm [inch]
Part #: OKEX-ID75Z OKEX-ID20MZ
ID Cutting Holder (3/4” and 20mm)
847-367-4800www.lyndexnikken.com
17
LB20
00/2
500/
3000
EX
LU30
00EX
/GEN
OS L
300-
MW
Okuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (1”) Main & Sub Bolt 1” (25.40mm) 1000 PSI
ID Cutting Holder (25mm) Main & Sub Bolt 0.984” (25.00mm) 1000 PSI
25.4
0
712.795
1.00
0
1.00
0
2.16555
1.00
025
.40
25.4
025
.40
1.00
0
47.5
01.
870
25.401.000
72.5
02.
854
50.
197
[.984
]
25[.9
84]
25
[.984
]
25[.9
84]
25 [.984]
25
Unit: mm [inch]
Part #: OKEX-ID10Z-MS OKEX-ID25MZ-MS
ID Cutting Holder (1” and 25mm) Main & Sub
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (3/4”) Main & Sub Bolt 3/4” (19.05mm) 1000 PSI
ID Cutting Holder (20mm) Main & Sub Bolt 0.787” (20.00mm) 1000 PSI
20.0
0[.7
87]
[.787
]20
.00
[.787
]20
.00
[.787]20.00[.7
87]
20.0
0
71
19.0
5
47.5
0
0.75
0
1.87
0
552.165
19.0
5
2.795
0.75
019
.05
0.75
0
19.0
50.
750
0.75019.05
953.
740
72.5
02.
854
50.
197
Unit: mm [inch]
Part #: OKEX-ID75Z-MS OKEX-ID20MZ-MS
ID Cutting Holder (3/4” and 20mm) Main & Sub
847-367-4800www.lyndexnikken.com
18
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Static Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Description Interface Blade Output Size
Cut Off Holder (32mm) Bolt 1.26” (32mm)
3.74
0
2.99276
15°
5.173131.40
95
47.5
01.
870
3.15080
24
0.2366
0.945
0.64
616
.40
70.276
3.93
710
0321.
260
Unit: mm [inch]
Part #: OKEX-CO32XCut Off Holder (32mm)
Oku
ma
LB40
00E
X
19Don’t forget to cover open turrets with this part: OKE4-PLUG
Okuma LB4000EX Series - Live Tools847-367-4800www.lyndexnikken.com
Clockwise Output
Clockwise Input
Clockwise Output
Clockwise Input
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size Replacement Nut Coolant Nozzle Wrench for Nut
Wrench for Spindle
External1000 PSI Max. Pressure
Axial 6000 1:1 43ft-lbs (58N-m)ER40
(0.118-1.023”)
NA40 OK116-70060 FK-9 FK-11
552.
165
2.20556
2.36
260
0.39
410
3.34685
1.57540
200.787
522.047
2.48063
4.40
911
2
522.047
Unit: mm [inch]
LN Part # (old): OKA01-14000Part #: OKE4-ER40ZFace Drill/Milling Unit
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size Replacement Nut Coolant Nozzle Wrench for Nut
Wrench for Spindle
External1000 PSI Max. Pressure
Radial 6000 1:1 43 ft-lbs (58N-m)ER40
(0.118-1.023”)
NA40 OK116-70930 FK-9 FK-11
63100.
394
2.36
260
2.48
0
1.02426
1.96950
2.71769
30.501.201
552.
165
2.16555
2.16555
2.16
555
170.
669
Unit: mm [inch]
LN Part # (old): OKA01-13000Part #: OKE4-ER40XOD Drill/Milling Unit
847-367-4800www.lyndexnikken.com
20
Okuma LB4000EX Series - Static ToolsO
kum
a LB
4000
EX
Don’t forget to cover open turrets with this part: OKE4-PLUG
Description Interface Output Size Maximum Internal Pressure
Boring Bar Holder (1.5”) Bolt 1.5” (38.10mm) 1000 PSI
Boring Bar Holder (40mm) Bolt 1.575” (40.00mm) 1000 PSI
522.
047
2.79571
2.16555
2.04
752
1164.567
11.5
01.
772
45
3.543
5
90
0.197
0.45
311
0.43
3
[1.575] 40.00
1.142
75
29
2.95
3
4.09
410
4 38.101.500
Unit: mm [inch]
Part #: OKE4-BG15Z-C OKE4-BG40MZ-C
Boring Bar Holder (1.5” and 40mm)
Description Interface Output Size Maximum External Pressure
Boring Bar Holder (1.5”) Bolt 1.5” (38.10mm) 1000 PSI
2.79571
2.04
752
552.165
0.4531.77245
119
4.68
5
11.51.90948.5
50.
197
1214.764
1.50038.10
752.
953
953.740
2.04
752
522.
047
Unit: mm [inch]
LN Part # (old): OK126-60000Part #: OKE4-BG15ZBoring Bar Holder (1.5”)
INTERNAL COOLANTLN Part # (old): OK126-61000
21
Oku
ma
LB40
00E
X
Don’t forget to cover open turrets with this part: OKE4-PLUG
847-367-4800www.lyndexnikken.com Okuma LB4000EX Series - Static Tools
Description Interface Output Size Maximum External Pressure
Boring Bar Holder (1.5”) 2 Output Bolt 1.5” (38.10mm) 1000 PSI
702.
756
4.961126
1094.2912.
756
100
70
1.14229
2.00851
2.32359
3.93
7 38.101.500
11.5
00.
453
4.29
1
4.409112
109
0.86622
0.1975
451.
772
Unit: mm [inch]
Part #: OKE4-BG15Z-MD-CBoring Bar Holder (1.5”) 2 Output
Description Interface Output Size Maximum Internal Pressure
Boring Bar Holder (2”) Bolt 2.0” (50.80mm) 1000 PSI
903.543
1.693
104
4.09
4 50.802.000
43
863.
386
5
1.96
913
500.
512
0.197
80.
315
2.04
752
712.795
552.165
2.04
752
1184.646
Unit: mm [inch]
Part #: OKE4-BG20Z-CBoring Bar Holder (2”)
INTERNAL COOLANT
847-367-4800www.lyndexnikken.com
22
Okuma LB4000EX Series - Static ToolsO
kum
a LB
4000
EX
Don’t forget to cover open turrets with this part: OKE4-PLUG
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (1”) Bolt 1” (25.40mm) 1000 PSI
OD Cutting Holder (1.25”) Bolt 1.25” (31.75mm) 1000 PSI
OD Cutting Holder (25mm) Bolt 0.984” (25.00mm) 1000 PSI
48
34[1.339]
[0.197]
[1.890]
5
84[3
.307
][1
.250
]
[5.748]146
57[2
.244
]
[2.2
44]
57[1.250]31.75
31.7
5
91[3.583]
25.4
0[1
.000
]
84[3.307]
[5.354]136
[1.9
69]
50
[.984]25.00
[2.9
13]
74
25.
00[.9
84]
[.984
] 2
5.00
31.7
5[1
.250
]
87[3.425]
[5.354]
[1.9
69]
50
136
[1.ooo]25.4
[2.9
13]
74
[1.0
00]
25.4
0
Unit: mm [inch]
LN Part # (old): OK126-64000Part #: OKE4-OD10X OKE4-OD12X OKE4-OD25MX
OD Cutting Holder (1”, 1.25”,and 25mm)
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (1”) 2 Output Bolt1” (25.04mm) x2
0.984” (25.00mm) x2 1000 PSI
0.86
622
0.82
7
0.39
4
702.756
66
1.33
9
10
21
2.598
3450.
197
2.95375
108
4.25
2
120.
472
261.
024
55
2.12
654
120.
472
1.02
4
2.16581
3.189
26
250.984
Unit: mm [inch]
Part #: OKE4-OD10X-MD
OD Cutting Holder (1” and 25mm) 2 Output
847-367-4800www.lyndexnikken.com
23
Okuma LB4000EX Series - Static Tools
Oku
ma
LB40
00E
X
Don’t forget to cover open turrets with this part: OKE4-PLUG
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (1”) Bolt 1” (25.40mm) 1000 PSI
ID Cutting Holder (25mm) Bolt 0.984” (25.00mm) 1000 PSI1.
969
100
50
3.18981 55
3.93
7
2.165
25.4
01.
000
[.984
]25
.00
[.984
]25
.00
[.984]25.00
1.000
1.00
025
.40
25.40
361.417
722.835
2.520
36
64
1.41
7
50.
197
341.
339
Unit: mm [inch]
LN Part # (old): OK126-65000Part #: OKE4-ID10Z OKE4-ID25MZ
ID Cutting Holder (1” and 25mm)
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (1.25”) Bolt 1.25” (31.75mm) 1000 PSI
572.
244
1.25
031
.75
3.18981
2.16555
572.
244
0.19
7
3.22882
5
542.126
341.
339
31.7
51.
250
1.25031.75
752.953
Unit: mm [inch]
Part #: OKE4-ID12Z
ID Cutting Holder (1.25”)
847-367-4800www.lyndexnikken.com
24
Okuma LB4000EX Series - Static ToolsO
kum
a LB
4000
EX
Don’t forget to cover open turrets with this part: OKE4-PLUG
Description Interface Blade Output Size
Cut Off Holder (32mm) Bolt 1.26” (32mm)
7
0.551
80
14
3.150
0.276
1.02426
16.4
00.
646
15°
1.96
9
5.449138.40
3.93
710
0
50
783.071
321.
260
100
3.93
7
Unit: mm [inch]
Part #: OKE4-CO32XCut Off Holder (32mm)
847-367-4800www.lyndexnikken.com Title
25
Oku
ma
GE
NO
S L2
00-M
Okuma GENOS L200-M - Live Tools847-367-4800www.lyndexnikken.com
This tool requires a minimum 20 micron filter and cannot be run dry.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
Internal1000 PSI Max. Pressure
Axial 6000 1:1 14.01ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 PM2B-1 FK-5
Clockwise Output
Clockwise Input
LN Part # (old): OK112-30000Part #: OKL2-ER20Z-CER20 Face/Drill Milling Unit
Unit: mm [inch]
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Axial 6000 1:1 14.01ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 OK116-70020 FK-5
Clockwise Input
Clockwise OutputLN Part # (old): OK112-10002Part #: OKL2-ER20ZER20 Face/Drill Milling Unit
Unit: mm [inch]
Don’t forget to cover open turrets with this part: VDI30-PLUG
847-367-4800www.lyndexnikken.com Title
26
847-367-4800www.lyndexnikken.com Okuma GENOS L200-M - Live Tools
Oku
ma
GE
NO
S L2
00-M
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
This tool requires a minimum 20 micron filter and cannot be run dry.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Radial 4500 1:1 15.3ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 OK116-71070 FK-5
Clockwise Output
Clockwise Input
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Radial 5000 1:1 14.01ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 PM2B-1 FK-5
Unit: mm [inch]
Unit: mm [inch]
Clockwise Output
Clockwise Input
LN Part # (old): OK112-21000Part #: OKL2-ER20XER20 Drill/Milling Unit
LN Part # (old): OK112-31000Part #: OKL2-ER20X-CER20 Drill/Milling Unit
Don’t forget to cover open turrets with thsi part: VDI30-PLUG
847-367-4800www.lyndexnikken.com Title
27
Oku
ma
Cap
tain
L37
0-M
an
d G
EN
OS
L300
-M
Okuma Captain L370-M and GENOS L300-M - Live Tools847-367-4800www.lyndexnikken.com
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
Internal1000 PSI Max. Pressure
Radial 5500 1:136.8 ft-lbs(50 N.m)
ER32(0.078-0.787”)
OK105-00100 OK116-20200 OK116-00800 PM2B-1 FK-8
Clockwise Output
Clockwise Output
Clockwise Input
451.772
512.008
702.756
40
2.717
2.48
063
2.75
670
69
291.
142
49.501.949
1.57
5
240.945
Clockwise Input
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Radial 4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
OK105-00100 OK116-20200 OK116-00800 OK116-70610 FK-8
Unit: mm [inch]
2.20556
451.772
451.772
702.
756
1.57
540
2.71769
1.14
229
0.94524
983.
858
512.008
LN Part # (old): OK101-14000Part #: OKL3-ER32XOD Drill/Milling Unit
LN Part # (old): OK101-67000Part #: OKL3-ER32X-ICE
OD Drill/Milling Unit
Don’t forget to cover open turrets with this part: VDI40-PLUG
NEW DESIGN ALLOWS FOR INTERNAL COOLANT TYPE TO BE RUN DRY CONTINUOUSLY!
847-367-4800www.lyndexnikken.com Title
28
847-367-4800www.lyndexnikken.com Okuma Captain L370-M and GENOS L300-M - Live Tools
Oku
ma
Cap
tain
L37
0-M
an
d G
EN
OS
L300
-M
401.
575
40
R2.32359
1.57540
1.575
5.200.205
1.102
3.32784.5
0.94524
1.14
22940
1.57
5
421.654
2.00
851
28
692.717
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Axial 4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
OK105-00100 OK116-20200 OK116-00700 OK116-70060 FK-8
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
Internal1000 PSI Max. Pressure
Axial 6500 1:159.0 ft-lbs (80N-m)
ER32(0.078-0.787”)
OK105-00100 OK116-20200 OK116-00700 PM2B-1 & EXTGSF-1-24
FK-8
Clockwise Output
Clockwise Input
Clockwise Output
Clockwise Input
0.945
1.102
52.52.067
24
2.00
851
2.73669.5
291.
142
1.57
540
28
421.654
401.575 1.575
40
R592.323
401.
575
LN Part # (old): OK101-13000Part #: OKL3-ER32ZFace Drill/Milling Unit
LN Part # (old): OK101-72000Part #: OKL3-ER32Z-ICEFace Drill/Milling Unit
Don’t forget to cover open turrets with this part: VDI40-PLUG
NEW DESIGN ALLOWS FOR INTERNAL COOLANT TYPE TO BE RUN DRY CONTINUOUSLY!
Unit: mm [inch]
Unit: mm [inch]
847-367-4800www.lyndexnikken.com Title
29
847-367-4800www.lyndexnikken.com Okuma Captain L370-M and GENOS L300-M - Live Tools
Oku
ma
Cap
tain
L37
0-M
an
d G
EN
OS
L300
-M
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Clockwise Input
Clockwise Output
1024.0162.717
69
441.
732
1.57
540
1.14
229
240.945 2.256
57.30
90°
401.
575
0.23
6
1.516
82R3.22
8
1.811
1.81
146
38.50
46
6
642.520
Unit: mm [inch]
LN Part # (old): OK101-7300Part #: OKL3-ER20-ADAdjustable Holder
Don’t forget to cover open turrets with this part: VDI40-PLUG
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch KitWrench for
SpindleCoolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Adjustable 4000 1:17.37 ft-lbs(10 N.m)
ER20(0.039-0.511”)
Hi-Q/ERAX20 OK116-20200 FK-7 PA-6/PB-6/PH-6/PAP CU6x4x130
E20AX
30
847-367-4800www.lyndexnikken.com Okuma Captain L370-MW - Live Tools O
kum
a C
apta
in L
370-
MW
1.10228
1.57
5
240.945
401.
142
294.961126
2.00
8
190.748
69
51
2.717 602.362
451.
772
1.39
835
.50
401.575
115.
504.
547
451.772
Unit: mm [inch]
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Clockwise Output
Clockwise Input
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Offset(M)
4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
NA32 OK116-20200 OK116-00500 OK116-70060 FK-8
LN Part # (old): OK109-13001Part #: OKL3-ER32Z-OFMFace Drill/Milling Unit- Main
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Counter Clockwise Output
Clockwise Input
196
7.71
7
853.346
1.102
2.835
29
2.717
1064.173
690.945
24
1.14
2
51
28
2.00
8
401.
575 1.
772
45
72190.748
115.
724.
556
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Axial 4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
NA32 OK116-20200 OK116-01900 OK116-70060 FK-8
LN Part # (old): OK101-14001Part #: OKL3-ER32Z-OFSFace Drill/Milling Unit- Sub
Unit: mm [inch]
Don’t forget to cover open turrets with thsi part: VDI40-PLUG
31
847-367-4800www.lyndexnikken.com Okuma Captain L370-MW - Live Tools
Oku
ma
Cap
tain
L37
0-M
W
451.772
512.008
702.756
40
2.717
2.48
063
2.75
670
69
291.
142
49.501.949
1.57
5
240.945
692.717
28
722.835
1.57
540
28
0.945
2.00
8
1.14
2
24
1.102
29
51
1.102
6.575
0.74819
167
512.
008
454.
547
115.
501.
398
35.5
0
1.77245
1.77
2
401.575
Unit: mm [inch]
Unit: mm [inch]
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
On the main spindle, the clutch shaft and the collet shaft rotate in the same direction; on the sub spindle, they rotate in opposite directions.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Clockwise Output
Clockwise Input
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Radial 4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
OK105-00100 OK116-20200 OK116-00800 OK116-70610 FK-8
LN Part # (old): OK109-15001Part #: OKL3-ER32Z-OFMSFace Drill/Milling Unit- Double
LN Part # (old): OK101-14000Part #: OKL3-ER32XOD Drill/Milling Unit
Don’t forget to cover open turrets with this part: VDI40-PLUG
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Offset(D)
4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
NA32 OK116-20200 OK116-00500 main: OK116-70290sub: OK116-70250
plug: OK116-70090
FK-8
32
847-367-4800www.lyndexnikken.com Okuma Captain L470-M - Live Tools
Oku
ma
Cap
tain
L47
0-M
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Radial 3000 1:126.0 ft-lbs(35.3 N.m)
ER40(0.118-1.023”)
OK116-70980 OK116-20300 OK116-00900 OK116-70930 FK-9
This tool requires a minimum 20 micron filter and cannot be run dry.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Radial 3000 1:126.0 ft-lbs(35.3 N.m)
ER40(0.118-1.023”)
OK116-70980 OK116-20300 OK116-00900 OK116-70930 FK-9
752.953
491.929
93.5
03.
681
803.
150
501.969
501.969
1.37
8
1.57
5
1.26032
3540
692.717 63
[2.480]
752.953
491.929
501.969
[2.480]63
501.969
2.71769
1.57
5
813.
189
40
321.260
1.37
835
803.
150
Clockwise Output
Clockwise Input
Clockwise Output
Clockwise Input
LN Part # (old): OK102-18000Part #: OKL4-ER40XOD Drill/Milling Unit
LN Part # (old): OK102-23000Part #: OKL4-ER40X-C-7MPOD Drill/Milling Unit
Don’t forget to cover open turrets with this part: VDI40-PLUG
33
847-367-4800www.lyndexnikken.com Okuma Captain L470-M - Live Tools
Oku
ma
Cap
tain
L47
0-M
Unit: mm [inch]
Unit: mm [inch]
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
This tool requires a minimum 20 micron filter and cannot be run dry.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Axial 3000 1:126.0 ft-lbs(35.3 N.m)
ER40(0.118-1.023”)
OK116-70980 OK116-20300 OK116-01000 OK116-70930 FK-9
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Axial 3000 1:126.0 ft-lbs(35.3 N.m)
ER40(0.118-1.023”)
OK116-70980 OK116-20300 OK116-01000 OK116-70930 FK-9
40
1.201
501.9692.717
6932
1.57
5
1.260 2.559
30.50
65
351.
378
1.57
540
401.575 1.575
40
2.36
260
R31.25NUT RAD.
1.230
501.9693.543
90692.717
321.260
401.
575
351.
378
30.501.201 1.575
40 401.575
NUT RAD.
1.230 602.
362
401.
575
R31.25
30.118
Clockwise Output
Clockwise Input
Clockwise Input
Clockwise OutputLN Part # (old): OK102-17000Part #: OKL4-ER40ZFace Drill/Milling Unit
LN Part # (old): OK102-22000Part #: OKL4-ER40Z-C-7MPFace Drill/Milling Unit
Don’t forget to cover open turrets with this part: VDI40-PLUG
34
847-367-4800www.lyndexnikken.com Okuma Captain L470-M - Live Tools
Oku
ma
Cap
tain
L47
0-M
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
1.96950
813.
189
642.520
38.501.516
461.
811
60.
236
2.25657.30
1.57
5
1.37
835
321.260
401.
575
692.717 4.016
90°
102
40
441.
732
Clockwise Output
Clockwise Input
LN Part # (old): OK102-24000Part #: OKL4-ER20-ADAdjustable Holder
Don’t forget to cover open turrets with this part: VDI40-PLUG
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch KitWrench for
SpindleCoolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Adjustable 4000 1:17.37 ft-lbs(10 N.m)
ER20(0.039-0.511”)
Hi-Q/ERAX20 OK116-20300 FK-7 PA-6/PB-6/PH-6/PAP CU6x4x130
E20AX
3535
Lyndex-Nikken VDI30 Static Tool Holders847-367-4800www.lyndexnikken.com
Unit: mm [inch]
Unit: mm [inch]
Unit: mm [inch]
Unit: mm [inch]
Unit: mm [inch]
Left Hand Short Inverted Radial Turning Tool
Left Hand Axial Turning Tool
[1.4
17]
36
[0.7
87]
20
[0.7
87]
20
Left Hand Short Radial Turning Tool
Left Hand Long Radial Turning Tool
Left Hand Long Inverted Radial Turning Tool
[0.7
09]
18
[0.7
87]
20
[0.7
87]
20
[0.8
27]
21 [0.7
09]
18
[0.7
87]
20
Part #: VDI30-OD75X-B2 VDI30-OD20MX-B2
Part #: VDI30-OD75X-LG-B6 VDI30-OD20MX-LG-B6
Part #: VDI30-OD75X-LG-OHB8 VDI30-OD20MX-LG-OHB8
Part #: VDI30-OD75X-OHB4 VDI30-OD20MX-OHB4
Part #: VDI30-ID75Z-C2 VDI30-ID20MZ-C2
36
847-367-4800www.lyndexnikken.com Lyndex-Nikken VDI30 Static Tool Holders
ER E4 DIN 6499[2.264]57.50
[1.9
69]
Ø50
Unit: mm [inch]
Left Hand Inverted Axial Turning Tool
Double External Coolant Flow Boring Bar Holder
Cut Off Tool[0
.787
]20
[1.2
60]
Ø32
[1.3
78]
35[1
.496
]38
Unit: mm [inch]
Unit: mm [inch]
Unit: mm [inch]
Part #: VDI30-ID75Z-OHC4 VDI30-ID20MZ-OHC4
Part #: VDI30-BG12Z-C-E2 VDI30-BG32MZ-C-E2
Part #: VDI30-ER25Z-E4 VDI30-ER32Z-E4
Part #: VDI30-CO26MX-LH VDI30-CO26MX-OHLH
3737
847-367-4800www.lyndexnikken.com Lyndex-Nikken VDI40 Static Tool Holders847-367-4800www.lyndexnikken.com
Left Hand Short Radial Turning Tool
Left Hand Long Radial Turning Tool
[0.9
84]
25
[0.9
06]
23
[0.9
84]
25
Unit: mm [inch]
Unit: mm [inch]
Part #: VDI40-OD10X-B2 VDI40-OD25MX-B2
Part #: VDI40-OD10X-LG-B6 VDI40-OD25MX-LG-B6
Left Hand Short Inverted Radial Turning Tool[1
.024
]26
[0.9
84]
25
Unit: mm [inch]Part #: VDI40-OD10X-OHB4 VDI40-OD25MX-OHB4
Left Hand Long Inverted Radial Turning Tool
[1.0
24]
26
[4.646]118 Unit: mm [inch]
Part #: VDI40-OD10X-LG-OHB8 VDI40-OD25MX-LG-OHB8
Left Hand Axial Turning Tool
[0.9
84]
25
[1.870]47.50
Unit: mm [inch]Part #: VDI40-ID10Z-C2 VDI40-ID25MZ-C2
38
847-367-4800www.lyndexnikken.com Lyndex-Nikken VDI40 Static Tool Holders
Left Hand Inverted Axial Turning Tool
Double External Coolant Flow Boring Bar Holder
[0.9
84]
25
[1.0
24]
26
[1.260]Ø32
[1.500]Ø38.10
[1.250]ø31.75
Unit: mm [inch]
Unit: mm [inch]
Part #: VDI40-ID10Z-OHC4 VDI40-ID25MZ-OHC4
Part #: VDI40-ID10Z-OHC4 VDI40-ID25MZ-OHC4 VDI40-BG15Z-C-E2
Cut Off Tool
Cut Off Tool
[1.2
60]
32Unit: mm [inch]
Unit: mm [inch]
Part #: VDI40-CO26MX-LH VDI40-CO32MX-LH
Part #: VDI40-CO26MX-OHLH
ER E4 DIN 6499[2.835]
72
[2.4
80]
ø63
Unit: mm [inch]Part #: VDI40-ER32Z-E4 VDI40-ER40Z-E4
3939
847-367-4800www.lyndexnikken.com ER Series Collets
SIZE ER16 ER20 ER25 ER32 ER401/32” E16-002 - - - -1/16” E16-004 E20-004 E25-004 - -3/32” E16-006 E20-006 E25-006 - -1/8” E16-008 E20-008 E25-008 E32-008 -5/32” E16-010 E20-010 E25-010 E32-010 E40-0103/16” E16-012 E20-012 E25-012 E32-012 E40-0127/32” E16-014 E20-014 E25-014 E32-014 E40-0141/4” E16-016 E20-016 E25-016 E32-016 E40-0169/32” E16-018 E20-018 E25-018 E32-018 E40-0185/16” E16-020 E20-020 E25-020 E32-020 E40-02011/32” E16-022 E20-022 E25-022 E32-022 E40-0223/8” E16-024 E20-024 E25-024 E32-024 E40-024
13/32” E16-026 E20-026 E25-026 E32-026 E40-0267/16” - E20-028 E25-028 E32-028 E40-02815/32” - E20-030 E25-030 E32-030 E40-0301/2” - E20-032 E25-032 E32-032 E40-032
17/32” - - E25-034 E32-034 E40-0349/16” - - E25-036 E32-036 E40-03619/32” - - E25-038 E32-038 E40-0385/8” - - E25-040 E32-040 E40-040
21/32” - - - E32-042 E40-04211/16” - - - E32-044 E40-04423/32” - - - E32-046 E40-0463/4” - - - E32-048 E40-048
25/32” - - - E32-050 E40-05013/16” - - - - E40-05227/32” - - - - E40-0547/8” - - - - E40-056
29/32” - - - - E40-05815/16” - - - - E40-06031/32” - - - - E40-062
1” - - - - E40-064
SIZE ER16 ER20 ER25 ER32 ER401.0mm E16-039 - - - -1.5mm E16-059 - - - -2.0mm E16-078 E20-078 E25-078 - -3.0mm E16-118 E20-118 E25-118 E32-118 -3.5mm E16-137 E20-137 E25-137 E32-137 -4.0mm E16-157 E20-157 E25-157 E32-157 E40-1575.0mm E16-196 E20-196 E25-196 E32-196 E40-1966.0mm E16-236 E20-236 E25-236 E32-236 E40-2367.0mm E16-275 E20-275 E25-275 E32-275 E40-2758.0mm E16-314 E20-314 E25-314 E32-314 E40-3149.0mm E16-354 E20-354 E25-354 E32-354 E40-35410.0mm E16-393 E20-393 E25-393 E32-393 E40-39311.0mm - E20-433 E25-433 E32-433 E40-43311.5mm - E20-452 E25-452 E32-452 E40-45212.0mm - E20-472 E25-472 E32-472 E40-47213.0mm - E20-511 E25-511 E32-511 E40-51114.0mm - - E25-551 E32-551 E40-55115.0mm - - E25-590 E32-590 E40-59016.0mm - - E25-629 E32-629 E40-62917.0mm - - - E32-669 E40-66918.0mm - - - E32-708 E40-70819.0mm - - - E32-748 E40-74819.5mm - - - E32-767 E40-76720.0mm - - - E32-787 E40-78721.0mm - - - - E40-82622.0mm - - - - E40-86623.0mm - - - - E40-90524.0mm - - - - E40-94425.0mm - - - - E40-98426.0mm - - - - E40-1023
STANDARD (INCH) STANDARD (METRIC)
ER Standard type collet
ER Counter-Bored type collet
Style D D1 L Collet RangeCoolant Collet
Size RangeNut Tightening Torque
Standard collet Counter-bored collet
ER16 17.2mm 11.3mm 27.0mm 0.5 - 10.0mm 4.0 - 10.0mm (3/16” - 17/64”) 30 - 37 ft-lbs 18 - 22 ft-lbs
ER20 21.2mm 14.5mm 31.0mm 1.0 - 13.0mm 5.0 - 13.0mm (5/32” - 1/2”) 60 - 74 ft-lbs 42 - 52 ft-lbs
ER25 26.2mm 18.5mm 35.0mm 1.0 - 16.0mm 6.0 - 16.0mm (7/32” - 5/8”) 77 - 96 ft-lbs 54 - 67 ft-lbs
ER32 33.2mm 24.4mm 40.0mm 2.0 - 20.0mm 10.0 - 20.0mm (1/4” - 25/32”) 100 - 125 ft-lbs 77 - 96 ft-lbs
ER40 41.2mm 31.2mm 46.0mm 3.0 - 26.0mm 10.0 - 26.0mm (1/4” - 1 1/32”) 125 - 157 ft-lbs 130 - 162 ft-lbs
40
847-367-4800www.lyndexnikken.com ER Series Coolant Collets
SIZE ER16 ER20 ER25 ER323/32” E16-006(C) - - -7/64” E16-007(C) - - -1/8” E16-008(C) - - -9/64” E16-009(C) - - -5/32” E16-010(C) E20-010(C) - -11/64” E16-011(C) E20-011(C) - -3/16” E16-012(C) E20-012(C) - -13/64” E16-013(C) E20-013(C) - -7/32” E16-014(C) E20-014(C) E25-014(C) -15/64” E16-015(C) E20-015(C) E25-015(C) -1/4” E16-016(C) E20-016(C) E25-016(C) E32-016(C)
17/64” E16-017(C) E20-017(C) E25-017(C) E32-017(C)9/32” E16-018(C) E20-018(C) E25-018(C) E32-018(C)19/64” E16-019(C) E20-019(C) E25-019(C) E32-019(C)5/16” E16-020(C) E20-020(C) E25-020(C) E32-020(C)21/64” E16-021(C) E20-021(C) E25-021(C) E32-021(C)11/32” E16-022(C) E20-022(C) E25-022(C) E32-022(C)23/64” E16-023(C) E20-023(C) E25-023(C) E32-023(C)3/8” E16-024(C) E20-024(C) E25-024(C) E32-024(C)
25/64” E16-025(C) E20-025(C) E25-025(C) E32-025(C)13/32” E16-026(C) E20-026(C) E25-026(C) E32-026(C)27/64” - E20-027(C) E25-027(C) E32-027(C)7/16” - E20-028(C) E25-028(C) E32-028(C)29/64” - E20-029(C) E25-029(C) E32-029(C)15/32” - E20-030(C) E25-030(C) E32-030(C)31/64” - E20-031(C) E25-031(C) E32-031(C)
1/2” - E20-032(C) E25-032(C) E32-032(C)33/64” - - E25-033(C) E32-033(C)17/32” - - E25-034(C) E32-034(C)35/64” - - E25-035(C) E32-035(C)9/16” - - E25-036(C) E32-036(C)37/64” - - E25-037(C) E32-037(C)19/32” - - E25-038(C) E32-038(C)39/64” - - E25-039(C) E32-039(C)
5/8” - - E25-040(C) E32-040(C)41/64” - - - E32-041(C)21/32” - - - E32-042(C)43/64” - - - E32-043(C)11/16” - - - E32-044(C)45/64” - - - E32-045(C)23/32” - - - E32-046(C)47/64” - - - E32-047(C)
3/4” - - - E32-048(C)49/64” - - - E32-049(C)25/32” - - - E32-050(C)
SIZE ER16 ER20 ER25 ER32 ER404.0mm E16-157(C) - - - -4.5mm E16-177(C) - - - -5.0mm E16-196(C) E20-196(C) - - -5.5mm E16-216(C) E20-216(C) - - -6.0mm E16-236(C) E20-236(C) E25-236(C) - -6.5mm E16-255(C) E20-255(C) E25-255(C) - -7.0mm E16-275(C) E20-275(C) E25-275(C) - -7.5mm E16-295(C) E20-295(C) E25-295(C) - -8.0mm E16-314(C) E20-314(C) E25-314(C) - -8.5mm E16-334(C) E20-334(C) E25-334(C) - -9.0mm E16-354(C) E20-354(C) E25-354(C) - -9.5mm E16-374(C) E20-374(C) E25-374(C) - -
10.0mm E16-393(C) E20-393(C) E25-393(C) E32-393(C) E40-393(C)10.5mm - E20-413(C) E25-413(C) E32-413(C) E40-413(C)11.0mm - E20-433(C) E25-433(C) E32-433(C) E40-433(C)11.5mm - E20-452(C) E25-452(C) E32-452(C) E40-452(C)12.0mm - E20-472(C) E25-472(C) E32-472(C) E40-472(C)12.5mm - E20-492(C) E25-492(C) E32-492(C) E40-492(C)13.0mm - E20-511(C) E25-511(C) E32-511(C) E40-511(C)13.5mm - - E25-531(C) E32-531(C) E40-531(C)14.0mm - - E25-551(C) E32-551(C) E40-551(C)14.5mm - - E25-570(C) E32-570(C) E40-570(C)15.0mm - - E25-590(C) E32-590(C) E40-590(C)15.5mm - - E25-610(C) E32-610(C) E40-610(C)16.0mm - - E25-629(C) E32-629(C) E40-629(C)16.5mm - - - E32-649(C) E40-649(C)17.0mm - - - E32-669(C) E40-669(C)17.5mm - - - E32-688(C) E40-688(C)18.0mm - - - E32-708(C) E40-708(C)18.5mm - - - E32-728(C) E40-728(C)19.0mm - - - E32-748(C) E40-748(C)19.5mm - - - E32-767(C) E40-767(C)20.0mm - - - E32-787(C) E40-787(C)20.5mm - - - - E40-807(C)21.0mm - - - - E40-826(C)21.5mm - - - - E40-846(C)22.0mm - - - - E40-866(C)22.5mm - - - - E40-885(C)23.0mm - - - - E40-905(C)23.5mm - - - - E40-925(C)24.0mm - - - - E40-944(C)24.5mm - - - - E40-964(C)25.0mm - - - - E40-984(C)25.5mm - - - - E40-1003(C)26.0mm - - - - E40-1023(C)
COOLANT (INCH) COOLANT (METRIC)
4141
847-367-4800www.lyndexnikken.com ER Series Tap Collets
ER Tap Collets feature a unique design that incorporates an internal square drive with our popular ER Series collets. The square drive matches the tap square, providing a tight fit for all rigid tapping applications.
PART NUMBER TAP INCH SIZE TAP METRIC SIZE L1 Ø ET16-168 #8, 5/32” M4 15.0mm 0.168 0.131ET16-194 #10, 3/16” M4.5, M5 15.0mm 0.194 0.152ET16-220 #12, 7/32” - 15.0mm 0.220 0.165ET16-255 #14, 1/4” M6, M6.5 22.0mm 0.255 0.191ET20-168 #8, 5/32” M4 15.0mm 0.168 0.131ET20-194 #10, 3/16” M4.5, M5 15.0mm 0.194 0.152ET20-220 #12, 7/32” - 15.0mm 0.220 0.165ET20-255 #14, 1/4” M6, M6.5 20.0mm 0.255 0.191ET20-318 5/16” M7, M6.5 20.0mm 0.318 0.238ET20-323 7/16” - 20.0mm 0.323 0.242ET20-367 1/2” M12, M12.5 25.0mm 0.367 0.275ET20-381 3/8” M10 20.0mm 0.381 0.286ET25-168 #8, 5/32” M4 15.0mm 0.168 0.131ET25-194 #10, 3/16” M4.5, M5 15.0mm 0.194 0.152ET25-220 #12, 7/32” - 15.0mm 0.220 0.165ET25-255 #14, 1/4” M6, M6.5 20.0mm 0.255 0.191ET25-318 5/16” M7, M6.5 20.0mm 0.318 0.238ET25-323 7/16” - 20.0mm 0.323 0.242ET25-367 1/2” M12, M12.5 25.0mm 0.367 0.275ET25-381 3/8” M10 20.0mm 0.381 0.286ET25-429 9/16” M14 25.0mm 0.429 0.322ET25-437 1/8” NPT(L) - 18.0mm 0.437 0.328ET25-480 5/8” M16 25.0mm 0.480 0.360ET32-168 #8, 5/32” M4 15.0mm 0.168 0.131ET32-194 #10, 3/16” M4.5, M5 15.0mm 0.194 0.152ET32-220 #12, 7/32” - 15.0mm 0.220 0.165ET32-255 #14, 1/4” M6, M6.5 20.0mm 0.255 0.191ET32-318 5/16” M7, M6.5 20.0mm 0.318 0.238ET32-323 7/16” - 20.0mm 0.323 0.242ET32-367 1/2” M12, M12.5 25.0mm 0.367 0.275ET32-381 3/8” M10 20.0mm 0.381 0.286ET32-429 9/16” M14 25.0mm 0.429 0.322ET32-437 1/8” NPT - 18.0mm 0.437 0.328ET32-480 5/8” M16 25.0mm 0.480 0.360ET32-542 11/16” M18 30.0mm 0.542 0.406ET32-562 1/4” NPT - 18.0mm 0.562 0.421ET32-590 3/4” - 30.0mm 0.590 0.442ET32-652 13/16” M20 30.0mm 0.652 0.489ET40-255 #14, 1/4” M6, M6.5 25.0mm 0.255 0.191ET40-318 5/16” M7, M6.5 25.0mm 0.318 0.238ET40-323 7/16” 25.0mm 0.323 0.242ET40-367 1/2” M12, M12.5 25.0mm 0.367 0.275ET40-381 3/8” M10 25.0mm 0.381 0.286ET40-429 9/16” M14 25.0mm 0.429 0.322ET40-437 1/8” NPT 18.0mm 0.437 0.328ET40-480 5/8” M16 25.0mm 0.480 0.360ET40-542 11/16” M18 30.0mm 0.542 0.406ET40-562 1/4” NPT - 18.0mm 0.562 0.421ET40-590 3/4” - 30.0mm 0.590 0.442ET40-652 13/16” M20 30.0mm 0.652 0.489ET40-687 1/2” NPT - 18.0mm 0.687 0.515ET40-697 7/8” M22 30.0mm 0.697 0.523ET40-700 3/8” NPT - 18.0mm 0.70 0.531ET40-760 15/16” M24 35.0mm 0.76 0.570ET40-800 1” M25 35.0mm 0.80 0.600
42
847-367-4800www.lyndexnikken.com ER Series Tap Coolant Collets
Lyndex-Nikken has now combined the versatility of our ER tapping collets with the popularity of our coolant collets to create our patented ER Coolant Tap Collets.
PART NUMBER TAP INCH SIZE TAP METRIC SIZE L1 Ø ET16-255(C) #14, 1/4” M6, M6.5 22.0mm 0.255 0.191ET16-318(C) 5/16” M7, M6.5 22.0mm 0.318 0.238ET20-255(C) #14, 1/4” M6, M6.5 25.0mm 0.255 0.191ET20-318(C) 5/16” M7, M6.5 25.0mm 0.318 0.238ET20-323(C) 7/16” - 25.0mm 0.323 0.242ET20-367(C) 1/2” M12, M12.5 25.0mm 0.367 0.275ET20-381(C) 3/8” M10 25.0mm 0.381 0.286ET25-255(C) #14, 1/4” M6, M6.5 25.0mm 0.255 0.191ET25-318(C) 5/16” M7, M6.5 25.0mm 0.318 0.238ET25-323(C) 7/16” - 25.0mm 0.323 0.242ET25-367(C) 1/2” M12, M12.5 27.0mm 0.367 0.275ET25-381(C) 3/8” M10 25.0mm 0.381 0.286ET25-429(C) 9/16” M14 30.0mm 0.429 0.322ET25-480(C) 5/8” M16 30.0mm 0.48 0.36ET32-255(C) #14, 1/4” M6, M6.5 25.0mm 0.255 0.191ET32-318(C) 5/16” M7, M6.5 25.0mm 0.318 0.238ET32-323(C) 7/16” - 25.0mm 0.323 0.242ET32-367(C) 1/2” M12, M12.5 27.0mm 0.367 0.275ET32-381(C) 3/8” M10 25.0mm 0.381 0.286ET32-429(C) 9/16” M14 30.0mm 0.429 0.322ET32-480(C) 5/8” M16 30.0mm 0.48 0.36ET32-542(C) 11/16” M18 35.0mm 0.542 0.406ET32-590(C) 3/4” - 35.0mm 0.59 0.442ET32-652(C) 13/16” M20 35.0mm 0.652 0.489ET40-323(C) 7/16” - 25.0mm 0.323 0.242ET40-367(C) 1/2” M12, M12.5 27.0mm 0.367 0.275ET40-381(C) 3/8” M10 25.0mm 0.381 0.286ET40-429 (C) 9/16” M14 30.0mm 0.429 0.322ET40-480(C) 5/8” M16 30.0mm 0.48 0.36ET40-542(C) 11/16” M18 35.0mm 0.542 0.406ET40-590(C) 3/4” - 35.0mm 0.59 0.442ET40-652(C) 13/16” M20 35.0mm 0.652 0.489ET40-697(C) 7/8” M22 38.0mm 0.697 0.523ET40-760(C) 15/16” M24 38.0mm 0.76 0.57ET40-800(C) 1” M25 40.0mm 0.8 0.6
Note: Seals up to maximum coolant pressure of 1000 PSI.
4343
847-367-4800www.lyndexnikken.com Wrench Instructions, Warranty and Repair Services
Lyndex-Nikken is dedicated to providing not only the highest quality of equipment, but also the highest quality of service and customer care. With over 60 years of experience, our service engineers are looking forward to supporting your needs beyond your expectations.
We fully stock all internal components to provide an expedited and cost-effective maintenance program and rebuild package for your live tooling. Managing a maintenance schedule for all your machine tool accessory components can be challenging, so we’ll be glad to remind you when the time comes.
Warranty:
1 year warranty for internal components
2 year manufacturer warranty on external body
For any service request or inquiry, please contact our service department: (847) 367-4800
Insert setting fixture behind collet nut.
After securing the setting fixture in position, apply spanner wrench onto collet nut.
While holding the setting wrench, turn the spanner wrench clock-wise to tighten.
Wrench Instructions Service and Support
1
2
3
44
847-367-4800www.lyndexnikken.com TQW Torque Wrenches
Collet Number Part NumberAttachments (Type and Size) Torque Range Torque Wrench
Description mm Inch lbs Nm Part Number DescriptionER8 TQW-ER08 Blank Special Attachment - Call 4 6
TQW-02514X18,25ft.lbsER11 TQW-ER11(17) Hex/OE 17 0.67 11 15
ER16 TQW-ER16(32)
Hook
32 [+/-5mm] 1.25 40 54
TQW-15014X18,
150ft.lbs
ER20 TQW-ER20(32) 32 [+/-5mm] 1.25 60 81
ER25 TQW-ER25(43) 43 [+/-5mm] 1.69 75 102
ER32 TQW-ER32(50) 50 [+/-5mm] 1.96 100 136
ER40 TQW-ER40(63) 63 [+/-5mm] 2.48 125 169
SK6 TQW-SK06(18)Hex/OE
18 0.71 14 19 TQW-025 14X18, 25ft.lbsSK10 TQW-SK10(1) 25.4 1.00 33-34 45-46
TQW-15014X18,
150ft.lbsSK16 TQW-SK16(43)
Hook43 [+/-5mm] 1.69 55-62 74-84
SK25 TQW-SK25(60) 60 [+/-5mm] 2.36 66-73 90-99
TG75 TQW-TG075(50)Hook
50 [+/-5mm] 1.96 55 75
TQW-15014X18,
150ft.lbsTG100 TQW-TG100(63) 63 [+/-5mm] 2.48 75 102
TG150 TQW-TG150(82) 82 [+/-5mm] 3.22 100 136
Pull Stud - 13mm TQW-PS(13)
Hex/OE
13 0.51 14 ~ 18 19 to 25 TQW-025 14X18, 25ft.lbsPull Stud - 3/4” (19mm) TQW-PS(19) 19 0.75 44 ~ 59 60 to 80
TQW-15014X18,
150ft.lbsPull Stud - 30mm TQW-PS(30) 30 1.18 147 ~ 185 200 to 250
Pull Stud - 1/1/4” TQW-PS(32) 31.75 1.25 147 ~ 185 200 to 250
Milling Chuck - 3/4” TQW-C3/4(50)Hook
50 [+/-5mm] 1.96 19 to 24 26-32
TQW-15014X18,
150ft.lbsMilling Chuck - 1” TQW-C1(60) 60 [+/-5mm] 2.36 27 to 31 36-42
Milling Chuck - 1.1/4” TQW-C1.1/4(72) 72 [+/-5mm] 2.83 48 to 59 65-80
CAPTO C3 TQW-CAPTO3(8)Hex
8 0.31 26 35
TQW-15014X18,
150ft.lbsCAPTO C4 TQW-CAPTO4(10) 10 0.39 37 50
CAPTO C5 TQW-CAPTO5(12) 12 0.47 52 70
The TQW Torque Wrench is very accurate and easy-to-use, guaranteeing maximum accuracy and preventing tool overtightening or breakage.
• Variable torque adjustable wrench • Robust and durable • Ergonomic grip • Easy to read inch and metric scale • Strong steel shaft is highly corrosion resistant • Easy to set up and operation: A. Set wrench to desired torque setting B. Insert attachment C. Torque down on collet nut until it clicks in place
A wide selection of attachments are available: ER, SK, TG, Pull Stud, Milling Chuck, CAPTO
A Lock & Unlock collar securely locks the preset torque and prevents inadvertent adjustment.
Handle is shaped to provide a firm and ergonomic grip.
Design and Construction
45
847-367-4800www.lyndexnikken.com
Lyndex-Nikken offers Live Tooling for all Okuma Lathes!
1468 Armour BoulevardMundelein, IL 60060Phone: (847) 367-4800Fax: (847) 367-4815E-mail: [email protected]
• LB EX Series
• GENOS Series
• Captain Series
• LB & LBII Series
• LU Series
• LT EX Series
• V100R Vertical Lathe
• 2SP-H Series
• Heritage ES-L Series
46
VERTICAL & HORIZONTAL MACHINING CENTER ROTARY TABLES
Vertical
Genos M SeriesGenos M460VE | M560-VCNC180/202, 260/3025AX-130, 201
MB-V SeriesOkuma MB-46VA/B | MB56-VA/B | MB-66VA/BCNC180/202, 260/302, 321, 401, B350, B4505AX-130, 201, 230, 250
MA-Series VerticalMA-550VB | MA-650VBCNC260/302, 321, 401, B350, B4505AX-130, 201, 230, 250
Horizontal
MA-Series Horizontal Machine CentersOkuma MA-500HA/B | MA-600HA/B | MA-800HBCNC321T, 401T, 601T
MB-Series Horizontal Machine CentersOkuma MB-400H | MB-5000H | MB8000HCNC260T, 321T, 401T, 601T
47
CNC180/202 CNC321
CNC401 CNCB350 CNCB450
5AX-230
CNC601T
5AX-250
CNC321TCNC260T
Phone: (847) 367-4800 Fax: (847) 367-4815 www.lyndexnikken.com Connect with us on our social media channels!
CNC260/302
5AX-201
CNC401T
5AX-130
Vertical
Horizontal
www.lyndexnikken.com1468 Armour Boulevard
Mundelein, IL 60060E-mail: [email protected]
Phone: (847) 367-4800Fax: (847) 367-4815
CAT2015-OK-LBEX-CAPSEPTEMBER 2017