OLJA GTO d.o.o.Mladinska ulica 58250 BREŽICE,SLOVENIJATel:+386 36200868e-mail: office@oljagto.comwww.oljagto.com

ACEA C3 API SN/CFMeets the requirements of:VW 505.00/505.01;MB 229.51;/229.31/226.5;BMW Longlife-04;Ford M2C917-A;GM dexos 2;Porsche A40;

ACEA A3/B4;API SN/CFMeets the requirements of:VW 502.00/505.00, MB 229.3/226.5BMW Longlife-01Porsche A40Renault RN0700/RN0710

Available packages:

1L 20L 208L 1000L

Meets the requirements of:Allison C4/TES-389, Chrysler ATF+/+2/+3/+4,Ford Mercon V/Mercon/WSS-M2C922-A1GM Dexron II/IID/IIE/IIIG/IIIH,Honda ATF-Z1 (except in CVT)Hyundai/Kia SP-II/SP-III, Isuzu ATF II/IIIJaguar JLM 20238/20292/21044,JASO M315 Type 1A, Mazda M-III

Available packages:

1L 20L 208L 1000L

75W90

API GL-4Meets the requirements of:MB 235.11MAN 341 Typ Z2/E1ZF-TE ML 16A/17A/19A/19C

Available packages:

1L 20L 208L 1000L

80W90

Meets the requirements of:API GL-3/GL-4/GL-5/MT-1; MIL-L-2105/MIL-PRF-2105E, SAE J2360; DAF; MAN 341 Typ Z2/MAN 342 Typ M2; Scania STO 1:0; ZF TE-ML02B/04G/05A/07A/12L/12M; ZF TE-ML16B/16C/17H/19B/21A; MB 235.0; Mack GO-J;Iveco

Available packages:

1L 20L 208L 1000L

75W90

API GL-3/GL-4/GL-5/MT-1MIL-L-2105D/MIL-PRF-2105E, SAE J2360MB-Approval 235.8MAN 341 Typ Z2/342 Typ S1ZF TE-ML 02B/05A/12L/12N/16F/17B/19C/21AMeets the requirements of:Scania STO 1:0/STO 2:0 A FS, DAF, Iveco, Volvo 97312, Mack GO-J, ArvinMeritor 076-N, ZF TE-ML 07A/12B/16BMAN 3343 Typ S

Available packages:

1L 20L 208L 1000L

Meets the requirements of:GM Dexron IID/IIE/IIIF/IIIG/IIIHFord Mercon/M2C138-CJ/166-HMB 236.1/236.5/236.6/236.7/236.9/236.10MAN 339 Typ Z1/V1/Typ Z2/V2Allison C4/TES-389Cat TO-2; Voith 55.6335/55.6336Volvo 97340/97341ZF TE-ML 02F/03D/04D/09/11A/11B/14A/14B/

Available packages:

1L 20L 208L 1000L

API GL-5Mil-L-2105DMAN 342 Typ M1Meets the requirements of:ZF TE-ML 07A/16B/17B/19B/21AMB 235.085W90

Available packages:

1L 20L 208L 1000L

80W

API GL-4Mil-L-2105Meets the requirements of:MAN 341 Typ Z2/E1MB 235.1ZF TE-ML 17A

Available packages:

1L 20L 208L 1000L

Meets the requirements of:Dexron IID/IIE/IIIF/IIIG/IIIHMB 236.1/236.5/236.6/236.7/236.9Ford Mercon/M2C138-CJ/166-HMAN 339 Typ Z1/V1, Allison C4/TES-389Cat TO-2, Voith 55.6335 (G607)Volvo 97341, ZF TE-ML 02F/03D/04D/09A/09B/11A/11B/14A/17C

Heavy Duty Engine Oils

GTO ENDURANCE 10W40ACEA A3/B4, E7 API CI-4/SL Meets the requirements of:MB 228.3, MAN M 3275-1, Volvo VDS-3, Renault VI RLD-2,MTU Type 2, Cummins CES 20077/20078, Mack EO-N/EO-M Plus, Global DHD-1, Cat ECF-2, Deutz DQC III-10, Detroit Diesel 93K215, JASO DH-1

GTO ENDURANCE 10W40 LSACEA E6, E7 API CI-4

Meets the requirements of:MB 228.51, MAN M 3477/M 3271-1, Volvo VDS-3, Mack EO-N, Renault VI RXD/RGD/RLD-2, DAF Long Drain, MTU Type 3.1,Deutz DQC IV-10 LA, JASO DH-2, Cummins CES 20076/20077

GTO ENDURANCE 5W30 LSACEA E6, E7, E9 API CJ-4/SN

Meets the requirements of:MB 228.31/228.51, MAN M 3677/M 3477/M 3271-1,Scania Low Ash/LDF-4, Mack EO-O PP/EO-N PP/EO-M Plus,Renault VI RLD-3, MTU Type 3.1, Cummins CES 20081,Cat ECF-3, Deutz DQC IV-10 LA;JASO DH-2, Voit ,Detroit Diesel 93K218

Available packages:

20L 208L 1000L

Available packages:

20L 208L 1000L

Available packages:

20L 208L 1000L

Available packages:

20L 208L 1000L

GTO ENDURANCE 15W40ACEA E7 API CI-4/SL

Meets the requirements of:MB 228.3,Volvo VDS-3, Renault VI RLD-2,Mack EO-N/EO-M Plus, Cummins CES 20077/20078,MAN M 3275-1,Cat ECF-1-a/ECF-2,Deutz DQC III-10, MTU Type 2, Detroit Diesel 93K215,Global DHD-1;JASO DH-1

Heavy Duty Engine Oils

GTO ENDURANCE 10W ACEA E2 API SG/CF

Meets the requirements of:MB 227.0/228.0,MAN 270

Available packages:

20L 208L 1000L

GTO ENDURANCE 10W TO-4Meets the requirements of:Allison C4;Cat TO-4/TO-2;KomatsuKES 07.868.1;ZF TE-ML 03C

Available packages:

20L 208L 1000L

GTO ENDURANCE SAE 15W40 CF-4/SJ API CF-4/SJ; ACEA A2/B2/E2-04

Meets the requirements of:MB 228.1; MTU Cat 1; MAN 270/271; VOLVO VDS

Available packages:

10L 208L 1000L

API CF-4/SJ; ACEA A2/B2/E2-04

Meets the requirements of:MB 228.1; MTU Cat 1; MAN 270/271; VOLVO VDS

Available packages:

10L 208L 1000L

GTO ENDURANCE SAE 20W50 CF-4/SJ

Prevents squeaking, It reduces moisture, Clean and

protect, Removes rust particles, Releases jammed,

Mechanisms

Effective penetrates into narrow, Slits and allows for unwinding, Strongly rusted bolt, Nuts etc.

Start spray makes it easy to run petrol and diesel engines and in

this way protects the starter, motor and battery.

Expedient for lubrication, Well summarized and separates.

Protects from moisture various materials. For the care of

rubber parts.

GT Ceramic Anti Seize Spray is a high-pressure, heat-resistant and

metal-free separating, lubrication and corrosion protection paste with long-term protection. It prevents

seizure, burns and reduces abrasion in high-pressure parts.

Synthetic universal grease with high pressure and good intrusion

into the material. -20 ° C to + 220 ° C

Chain Lube Spray is a synthetic, transpartent adhesive lubricant for the

permanent inside and outside lubrications of all kinds of highly stressed chains and wire cables.

-20 ° C to + 220 ° C

It removes dust, outdated lubricants and other impurities on brakes,

clutches, gear units and other parts of the engine.

Gto Aerosol

GT Contact spray is the most effective remover of impurities and

cleaner for oxidized surfaces.Quickly and effectively eliminates

problems with plug contacts, regulators and switches.

Available packages:

20L 208L 1000L

GTO Agri 10w40 Semi SinteticAPI SF/CG-4/GL-4;ACEA E3-96, Mil-L-2104D

Meets the requirements of:Massey Ferguson CMS M1144/M1145; MB227.1; ZF TE-ML 06B/07B; Ford M2C134-D;Massey Ferguson CMS M1143; John Deere J20C; Cat TO-2; Allison C4

Available packages:

20L 208L 1000L

GTO Gear UTTO 80WAPI GL-4

Meets the requirements of:Ford M2C134-D; John Deere J20C; Massey Ferguson M1135/M1143; Volvo WB 101; Allison C4; Cat TO-2; Case MS1206/MS1207/MS1209;NH 410B ZF TE-ML 03E/05F/06K

Agricultural Oils and Lubricants (UTTO, STOU)

Available packages:

10L 205L 1000L

GTO Hidraulic Oil HLP 46DIN 51524/2 ISO 6743/4

Hydraulic oil is used in hydraulic and circulating systems for power transmission and lubrication of moderately loaded components of machines.

DIN 51524/2 ISO 6743/4

Hydraulic oil is used in hydraulic and circulating systems for power transmission and lubrication of moderately loaded components of machines.

Available packages:

10L 205L 1000L

GTO Hidraulic Oil HLP 68

Hidraulic Oil

AntiFreezeGTO AntiFreeze G11 Blue Concentrate

Meets the requirements of:BS6580, ASTDM D3306, VW TL 774 C SKODA

Available packages:

1L1kg 5L

208L20L 1000L

GTO AntiFreeze G12+ Concentrate

Meets the requirements of:BS6580:1992, ASTDM D4985, ASTM D1384, STN 668910, VW-TL-774-D, VW-TL 774-F, PN-93/C40008/07, SAE J 1034, Audi, SEAT, SKODA

Available packages:

1L1kg 5L

208L20L 1000L

GTO AntiFreeze G13 Concentrate

Meets the requirements of:BS6580:1992, ASTM D1384, STN 66 8910, VW-TL-774-J

Available packages:

1L1kg 5L

208L20L 1000L

Available packages: 500g Available packages: 400g

GTO Hammer Grease GTO BTX Grease

Gto Grease

Specification:DIN 51825: MF2U-20 ISO 6743-9: ISO-L-XBGHB2

High-temperature paste based on aluminum, graphite and copper for the lubrication of demolition boards of hydraulic and pneumatic hammers. It can be used as a paste protecting against burning and corrosion, creating a durable separating layer.

Specification:DIN 51825: KP2K-20

High quality lithium-calcium grease with extended lifetime designed for lubrication of

the most demanding applications in the automotive and industrial sectors.