EN DE FR ES IT SE R FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK DVA-5210 Designed by ALPINE Japan Printed in China (Y) 68P04190K34-C • OWNER'S MANUAL Please read before using this equipment. • BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. • MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. • ISTRUZIONI PER L'USO Si prega di leggere prima di utilizzare l'attrezzatura. • ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning. DVD-VIDEO/CD/MP3/WMA Player ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave., Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. Phone 0870-33 33 763 Dalian Ikemiya Printing Co., Ltd. 4 Jin Zhou Street Economic & Technical Development, Dalian, China DIGITAL VIDEO TM
Transcript
EN
DE
FR
ES
IT
SE
R
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK
DVA-5210
Designed by ALPINE JapanPrinted in China (Y)
68P04190K34-C
• OWNER'S MANUALPlease read before using this equipment.
• BEDIENUNGSANLEITUNGLesen Sie diese Bedienungsanleitung bitte vorGebrauch des Gerätes.
• MODE D'EMPLOIVeuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACIÓNLéalo antes de utilizar este equipo.
• ISTRUZIONI PER L'USOSi prega di leggere prima di utilizzarel'attrezzatura.
• ANVÄNDARHANDLEDNINGInnan du använder utrustningen bör du läsaigenom denna användarhandledning.
DVD-VIDEO/CD/MP3/WMA Player
ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda,
This symbol means important instructions.Failure to heed them can result in seriousinjury or death.
DO NOT WATCH VIDEO WHILE DRIVING.Watching the video may distract the driver from looking ahead ofthe vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOURATTENTION AWAY FROM SAFELY DRIVING YOURVEHICLE.Any function that requires your prolonged attention should onlybe performed after coming to a complete stop. Always stop thevehicle in a safe location before performing these functions.Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILLHEAR OUTSIDE NOISE WHILE DRIVING.Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.Viewing the display may distract the driver from looking ahead ofthe vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.(Check with your dealer if you are not sure.) Failure to do so mayresult in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THEREACH OF CHILDREN.Swallowing them may result in serious injury. If swallowed,consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACINGFUSES.Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.Use for other than its designed application may result in fire,electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTSIN INSERTION SLOTS OR GAPS.Doing so may result in personal injury or damage to the product.
CAUTIONThis symbol means important instructions.Failure to heed them can result in injury ormaterial property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.Failure to do so may cause personal injury or damage to theproduct. Return it to your authorized Alpine dealer or the nearestAlpine Service Center for repairing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.INSERT WITH THE CORRECT BATTERY POLARITY.When inserting the batteries, be sure to observe proper polarity (+and –) as instructed. Rupture or chemical leakage from thebattery may cause fire or personal injury.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONTPANEL OR MOVING MONITOR IS IN MOTION.Failure to do so may result in personal injury or damage to theproduct.
Operating Instructions
4-EN
Disc AccessoriesThere are various accessories available on the market forprotecting the disc surface and improving sound quality.However, most of them will influence the thickness and/ordiameter of the disc. Using such accessories can causeoperational problems. We recommend not using these accessorieson discs played in Alpine DVD players.
Disc StabilizerTransparent Sheet
Irregular Shaped DiscsBe sure to use round shaped discs only for this unit and never useany special shaped discs.Use of special shaped discs may cause damage to the mechanism.
Installation LocationMake sure the DVA-5210 will not be installed in a locationsubjected to:
• Direct sun and heat• High humidity and water• Excessive dust• Excessive vibrations
Correct HandlingDo not drop the disc while handling. Hold the disc so you willnot leave fingerprints on the surface. Do not affix tape, paper, orgummed labels to the disc. Do not write on the disc.
Disc CleaningFingerprints, dust, or soil on the surface of the disc could causethe DVD player to skip. For routine cleaning, wipe the playingsurface with a clean, soft cloth from the center of the disc to theouter edge. If the surface is heavily soiled, dampen a clean, softcloth in a solution of mild neutral detergent before cleaning thedisc.
PRECAUTIONSProduct CleaningUse a soft dry cloth for periodic cleaning of the product. Formore severe stains, please dampen the cloth with water only.Anything else has the chance of dissolving the paint or damagingthe plastic.
TemperatureDo not operate your unit in ambient temperature above +60°C(+140°F) or below -10°C (+14°F).
Moisture CondensationYou may notice the disc playback sound wavering due tocondensation. If this happens, remove the disc from the playerand wait about an hour for the moisture to evaporate.
Damaged DiscDo not attempt to play cracked, warped, or damaged discs.Playing a bad disc could severely damage the playbackmechanism.
MaintenanceIf you have problems, do not attempt to repair the unit yourself.Return it to your Alpine dealer or the nearest Alpine ServiceStation for servicing.
Never Attempt the FollowingDo not grip or pull out the disc while it is being pulled back intothe player by the automatic reloading mechanism.Do not attempt to insert a disc into the unit when the unit poweris off.
Inserting DiscsYour player accepts only one disc at a time for playback. Do notattempt to load more than one disc.Make sure the label side is facing up when you insert the disc.Press c to eject any disc that is inserted incorrectly.Playing a disc while driving on a very bumpy road may result inskips, but this will not scratch the disc or damage the player.
New DiscsAs a protective measure to prevent the disc from jamming, pressc to eject any disc with irregular surface or inserted incorrectly.When a new disc is inserted into the player and ejected afterinitial loading, using your finger, feel around the inside of thecenter hole and outside edge of the disc. If you feel any smallbumps or irregularities, this could inhibit proper loading of thedisc. To remove the bumps, rub the inside edge of the hole andoutside edge of the disc with a ball-point pen or other suchinstrument, then insert the disc again.
CORRECT
INCORRECT CORRECT
Center Hole
Bumps
Center Hole NewDisc
Outside(Bumps)
5-EN
Discs playable on this unitPlayable DiscsThe discs listed below can be played on this unit.
VIDEO CD
DIGITAL VIDEO
* Two-layer DVD disc compatible
Mark (logo) Recordedcontent
Disc size Max. playing time
One-sided discApprox. 4 hours
One-sided discApprox. 80 Minutes
Two-sided discApprox. 160 Minutes
Approx. 74 Minutes
Approx. 74 Minutes
Approx. 20 Minutes
Approx. 20 Minutes
Two-sided discApprox. 8 hours
DVDVideo
VideoCD
MusicCD
Audio+
Video(Movingpictures)
Audio+
Video(Movingpictures)
Audio
12 cm*
8 cm
12 cm
12 cm
8 cm
8 cm(CD single)
Discs that cannot be playedDVD-ROMs, DVD-RAMs, DVD + Rs, DVD + RWs, CD-ROMs(excluding MP3/WMA files), photo CDs, etc.
DVD region number (playable region number)This DVD player will play back any disc whose region number is2 (or All). DVDs with a region number other than those listedbelow, cannot be played on this DVD player.
Video CDsThis DVD head unit is compatible with playback control (PBC)compatible video CDs (version 2.0).“PBC” is a function by which you can use menu screens recordedon the disc to find the scene you want to watch and view varioustypes of information in dialog style.
Using compact discs (CD/CD-R/CD-RW)If you use unspecified compact discs, correct performance cannotbe guaranteed.You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable) which have been recorded only on audio devices.You can also play CD-Rs/CD-RWs containing MP3/WMAformatted audio files.
• Some of the following discs may not play on this unit:Flawed discs, discs with fingerprints, discs exposed to extremetemperatures or sunlight (e.g., left in the car or this unit), discsrecorded under unstable conditions, discs on which a recordingfailed or a re-recording was attempted, copy-protected CDswhich do not conform to the audio CD industry standard.
• Use discs with MP3/WMA files written in a format compliantwith ISO9660 level 1 or level 2. For details, see pages 16 and17.
To customers using CD-R/CD-RW• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
Tips for making your own CDsThe DVA-5210 plays DVD Video, Video CD, Audio CD and hasa built in MP3/WMA decoder.
The following information is designed to help you create yourown music CDs (either Audio CD or MP3/WMA encoded CD-R/RW files).
What is the difference between an Audio and MP3/WMACD?An Audio CD is the same format as the commercial CDs you buyin the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer3)/WMA (Windows Media Audio) is a data file that uses acompression scheme to reduce the size of the music file.*
Hybrid Audio CD and Data (MP3/WMA) CD-R/RW discs:The DVA-5210 can read either sector on the disc. Choose CD-DAto play the CD audio section or MP3/WMA to play the MP3/WMA section.*
Continued
ALL2
6-EN
Multisession CD-R/RW:Once a recording has been stopped, this is considered onesession. If the disc is not closed (finalized), additional data maybe added. Once this additional data has been recorded, thisbecomes a “multisession” CD. The DVA-5210 can only readmultisession DATA Formatted discs (MP3/WMA files - NotAudio CD files).
MP3 ID3 Tag/WMA Tag Information:The DVA-5210 read and displays MP3 ID3v1 tag or WMA taginformation. MP3 files created with ID3v2 tag information can beplayed back but the tag info cannot be read or displayed.
Properly formatted MP3/WMA Discs:Use ISO9660 formatting to insure proper playback. You may usestandard ISO naming Level 1 (8.3 DOS standard), Level 2 (32characters) or Joliet (Windows or Macintosh long filenames) filenaming conventions*.
*Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)• Do not touch the surface.• Do not expose the disc to direct sunlight.• Do not affix stickers or labels.• Clean the disc when it is dusty.• Make sure that the disc is smooth and flat.• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.Never expose the disc to direct sunlight.Heat and humidity may damage the disc and you may not beable to play it again.
Using DVD-Rs/DVD-RWs• This unit is compatible only with discs recorded in the DVD-
Video mode. Discs recorded in the DVD-VR mode cannot beplayed back.
• Note that discs not finalized (processed to enable to play onplayback-only DVD players) cannot be played on this DVDplayer.
• Some discs may not play back, depending on the recordingdevice. (This unit has a copy protection function. Discs copiedillegally will not be played back. Some files recorded by asoftware using an improper recording system may berecognized as illegally copied.)
• In the following cases, the disc may not play on this unit:discs recorded by certain DVD recorders, certain irregulardiscs, flawed discs, dirty discs, when the pickup lens of thisDVD player is dirty, or when moisture condensation hasoccurred inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/DVD-RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/DVD-RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs are moreaffected by heat, moisture, and direct sunlight. If left in a car,etc., damage may occur and it might not play on this unit.
Disc terminology
TitleIf titles are programmed for the DVD, these are the largest unitsof division of the information recorded on the disc.
ChapterEach Title may also be divided into smaller divisions, calledchapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that isprotected by method claims of certain U.S. patents and otherintellectual property rights owned by Macrovision Corporation andother rights owners. Use of this copyright protection technologymust be authorized by Macrovision Corporation, and is intendedfor home and other limited viewing uses only unless otherwiseauthorized by Macrovision Corporation. Reverse engineering ordisassembly is prohibited.
• “DTS” and “DTS2.0 + Digital Out” are trademarks of DigitalTheater Systems, inc.
• Windows Media and the Windows logo are trademarks, orregistered trademarks of Microsoft Corporation in the UnitedStates and/or other countries.
7-EN
Getting Started
When Using the Remote Control
• Point the remote control at the remote sensor withinabout 2 meters.
• It may not be possible to operate the remote controlif the remote control sensor is exposed to directsunlight.
• The remote control is a small, lightweight precisiondevice. To avoid damage, short battery life,operational errors and poor response, observe thefollowing.- Do not subject the remote control to excessiveshock.
- Do not put in a trouser pocket.- Keep away from food, moisture and dirt.- Do not place in direct sunshine.
Battery ReplacementBattery type: CR2025 battery or equivalent.
1 Opening the battery caseSlide out the battery cover while firmly pressing in thedirection of the arrow.
2 Replacing the batteryPut the battery in the case with the (+) indication upwardas shown in the illustration.
• Placing a battery in backwards way may cause a malfunction.
Continued
PWR
8-EN
Turning Power On and Off
Play Position Memory FunctionIf you turn power off or switch the ignition key to OFF duringplayback or change the source, playback will continue fromthe point where playback stopped when the power isturned ON again. The play position memory is canceledwhen the disc is removed.
When connecting to the head unitusing Ai-NET
Caution• To customers using the ALPINE head unit.
Before using this unit connected to an Ai-NET compatibleAV head unit or Ai-NET compatible head unit, make theappropriate settings in “Setting the System Switch” (page32) and “Setting the Ai-NET” (page 21).
• With this unit connected to an Ai-NET compatible AV headunit or Ai-NET compatible head unit, there may be somedelay during power-up from the remote control. This iscaused by the systems communications being carried out bythe various components and is not a defect.
• When connected with an Ai-NET compatible AV head unitor Ai-NET compatible head unit, the power cannot beturned off from the remote control. Turn off the DVA-5210power by switching the head unit’s source. For details, referto “Operating from the head unit” (page 22).
1 Set the head unit’s source to DVD.The power turns on.
• You cannot set the source to DVD on some head units. In this case,press PWR on the remote control to turn the power on.
2 To turn the power off, change the head unit’ssource.
When connecting to the head unitwithout using Ai-NET
CautionTo customers connecting the head unit without Ai-NET.When using this unit without an Ai-NET connection, read“Setting the System Switch” on page 32 and set “systemswitching” to “2” (STANDALONE).
1 Press PWR of the remote control.The power turns on.
2 To turn the power off, press PWR again.
3 Closing the coverSlide the cover as illustrated until a click is heard.
WarningDO NOT OPERATE ANY FUNCTION THAT TAKESYOUR ATTENTION AWAY FROM SAFELY DRIVINGYOUR VEHICLE.Any function that requires your prolonged attention shouldonly be performed after coming to a complete stop. Alwaysstop the vehicle in a safe location before performing thesefunctions. Failure to do so may result in an accident.
9-EN
Initial System Start-UpBe sure to press the RESET button when using the unit for the firsttime, after installing the CD changer, after changing the car battery, etc.
1 Turn off the unit power.
2 Open the door.Refer to “Loading and Unloading Discs” on this page.
3 Press RESET with a ball-point pen or similarpointed object.
Switching between NTSC and PALSet the output configuration to NTSC or PAL, depending on the disc.
Press and hold the PWR button for at least 2 seconds.
• PAL is the standard and there is no need to change the setting. Thesystem is set to PAL at time of shipment from the factory.
Loading and Unloading DiscsTurn on the power before loading and unloading discs. (Refer to“Turning the power on and off” on page 8.)
Loading discs
1 Slide the door down to open.
2 Insert the disc with the label side facing upwards.Once the disc is partially inserted, it is drawn inautomatically. Playback starts.
OPEN
3 Close the door.Be sure to close the door to prevent dust from entering theunit.
• If the ignition key is on ACC or ON, a disc can be inserted evenwhen the power is OFF.
• For two-sided DVDs, play one side of the disc to the end, thenunload the disc, turn it over and reload it to play the other side.
• Never insert map discs for navigation purposes as they coulddamage the equipment.
• If wrong disc, upside-down discs or dirty discs have been inserted,“DISC ERROR” is displayed. Open the door and remove the disc.
Unloading discs
1 Slide the door down to open.
2 Press c.Be sure to remove the disc.
• If the disc is not removed within a few moments, it will be reloadedautomatically.
3 Close the door.Be sure to close the door to prevent dust from entering theunit.
• Never close the door while the disc is being unloaded. Doing socould scratch the disc or damage the player.
• If the ignition key is set to ACC or ON, a disc can be removed evenwhen the power is OFF. After removing the disc, the power turnsOFF again automatically.
• During ACC OFF or while the disc is being loaded (“LOADING”is displayed), the disc will not be ejected even if you press c.
OPEN
OPEN c
RESET
10-EN
DVD/Video CD
Playing DVD/Video CD
Caution• Not all functions will operate for every DVD. See the individual
DVD’s instructions for details on the features supported.• Fingerprints on a disc may adversely affect playback. If a
problem occurs, remove the disc and check for fingerprints onthe playback side. Clean the disc if necessary.
• When using the remote control, be careful to press one buttonat time. Pressing multiple buttons at the same time may causeerroneous operation.
• If you switch the power or ignition key OFF, or change sourcesduring playback, playback will continue where you left offwhen you resume playback.
• If you try to perform an invalid operation (based on the type ofdisc being played), the following mark is displayed on themonitor screen:
Insert a disc with the label side facing up.
To load discs, see “Loading and Unloading Discs” on page 9.
Playback starts. The front panel VIDEO indicator lights inamber during playback.
• The reverse side of a double-sided DVD will not be playedautomatically. Remove the disc, turn it over, and reinsert it.
• It may take some time before playback starts after loading a disc.
If a menu screen appears
On DVDs and video CDs with playback control (PBC), menu screensmay appear automatically. If this happens, perform the operationdescribed below to start playback.
• For many discs, the menu screen can also be displayed by pressingMENU.
DVD menu
Press 8, 9, ; or : to select the desired item, thenpress ENT.
• For some discs it is possible to select items directly from the menuscreen using the number keys (“0” to “9”).
Video CD menu
Use the number keys (“0” to “9”) to select the desirednumber, then press ENT.
• The menu screen does not appear when the PBC function is turnedoff. If this is the case, press MENU to turn on the PBC function.
Stopping Playback (PRE-STOP)Press L during playback to stop playback. That position is stored inmemory.
1 Press L during playback.“PRE-STOP” is displayed.
2 Press -/J in the PRE-STOP mode.Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped maynot be accurate.
Stopping Playback
Press L twice during playback.“STOP” is displayed, and playback stops.
• Playback stops also when L is pressed for more than 2 seconds.• Playback starts from the beginning when -/J is pressed while
playback is stopped.
Fast-forwarding/Fast-reversing
1 During playback, press and hold g (fast-reverse)or f (fast-forward) .When pressed for more than 1 second, the disc isforwarded/reversed at double speed.When held in 5 more seconds, the disc is forwarded/reversed at 8 times the normal speed.
2 Release g or f to return to normal playback.
• No sound and no subtitles appear during fast-forward/fast-reverse.• For DVDs and video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
DISPLAY
RETURN
:/Jg
L
CLR
REPEAT
AUDIO
MENU
;
8
:
ENT.9
f
numberkeys(0 to 9)
ANGLE
SUBTITLE
V.OUT
11-EN
Finding the Beginning of Chapters or Tracks
During playback, press g or f.The chapter/track switches each time the button is pressed,and playback of the selected chapter/track starts.
f: Press this to start playback from the beginning ofthe following chapter or track.
g: Press this to start playback from the beginning ofthe current chapter or track.
• Some DVDs do not have chapters.
Supplementary explanation“Chapters” are divisions of movies or musical selectionson DVDs.“Tracks” are divisions of movies or musical selections onvideo and music CDs.
Playing Still Frames (pausing)
1 During playback, press -/J.
2 Press -/J to resume playback.
• No sound is played during the still mode.• The image or sound may stop temporarily when playback starts
from the pause mode, This is not a malfunction.
Frame-by-frame Playback
1 In the pause mode, press f.The picture advances by one frame each time the buttonis pressed.
2 Press -/J to resume normal playback.
• No sound is played during frame-by-frame playback.
Slow Motion Playback
1 When f is pressed and held in while in thepause mode, the slow motion playback mode isset.
2 Release f to pause, and press -/J to playback.
• No sound is played during slow motion playback.• Slow playback is not available when playing back a slide show.• During the slow motion playback, the playback speed may change
or the playback may skip to the next picture depending on the disc,but this is not a failure.
• Reverse slow motion playback is not available.
Searching by Title Number (DVD only)Use this function to easily find positions on the DVD using theDVD’s title.
1 When playback stops, input the number of the titleyou want to play using the number keys (“0” to“9”).
2 Press ENT.Playback starts from the selected title number.
• This function cannot be used on discs on which no title numbersare recorded.
• Press CLR to delete the last digit in the title number. Press andhold CLR for at least 2 seconds to clear all title numbers.
• Press RETURN to cancel the title search mode and resume normalplayback.
• The playback starts automatically for two digit title numbers evenif ENT. in procedure 2 is not pressed.
• Playback starts from the beginning of the chapter/track number inthe state of PRE-STOP.
Searching Directly by Chapter or TrackNumberUse this function to easily move to the beginning of the chapters ortracks on the disc.
1 During playback or pre-stop, input the number ofchapter or track you desire by using the numberkeys (“0” to “9”).
2 Press ENT.Playback starts from the selected chapter or track.
• This function cannot be used on discs on which no chapternumbers are recorded.
• Depending on the number of digits input, playback may startautomatically even if ENT. is not pressed in step 2.
• Press CLR to delete the last digit in the chapter/track number.Press and hold CLR for at least 2 seconds to clear “Chapter” and“Track” numbers.
• Press RETURN to cancel the chapter/track search mode andresume normal playback.
12-EN
Chapter/Track/Title Repeat PlaybackUse this function to play the disc’s titles, chapters or tracksrepeatedly.
During playback, press REPEAT.The repeat mode switches each time the button is pressed.
DVD
VIDEO CD
• The track/disc repeat modes cannot be used on video CDs withplayback control (PBC). Press MENU to turn the PBC function off.
• For some discs it is not possible to switch the repeat mode.
Switching the Audio TracksDVDs can have up to 8 different audio tracks. These alternate trackscan be switched during playback.
During playback, press AUDIO.The sound switches between the alternate audio tracksrecorded on the disc each time the button is pressed.
• The selected alternate track becomes the default setting every timethe power is turned on or the disc is replaced. If the disc does notinclude that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks duringplayback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins toplay.
Video CDs with multiplex audio
During playback, press AUDIO.The left and right channels will be output as shown in the figurebelow, each time the button is pressed.
LR → LL → RR → LR
The track is played repeatedly.
The entire disc is played repeatedly
(Factory default)
Switching the Angle (DVD only)On DVDs in which scenes have been filmed from multiple angles, theangle can be switched during playback.
During playback, press ANGLE.The angle switches between the angles recorded on the disceach time the button is pressed.
• Some time may be required for the angle to change.• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.- Non-seamless: When the angle is switched, a still picture isdisplayed first, after which the angle switches.
Switching the Subtitles (subtitle language)(DVD only)With multiple subtitle language DVDs, the subtitle language can beswitched during playback, or subtitles can be hidden.
During playback, press SUBTITLE.The subtitle switches between the languages recorded on thedisc and OFF each time the button is pressed.
• There may be a delay before the selected subtitle appears.• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD's menu.• The selected subtitle language becomes the default setting every
time the power is turned on or the disc is replaced. If the disc doesnot include that language, the disc’s default language is selectedinstead.
• For some discs, the subtitles will be displayed even when this is setto off.
TipsSwitching from the disc menu.For some discs, the audio language, angle and subtitles can beswitched from the disc menu.
1 Press MENU, select the item, then press ENT.2 Press 8, 9, ; or : to select the language or angle,
then press ENT.(For some discs, they can be selected using thenumber keys “0” to “9” while the language or theangle menu is displayed.)
↓RPT CHAPTER
↓RPT TITLE
↓RPT OFF
The chapter is played repeatedly.
The title is played repeatedly.
The mode returns to normalplayback. (Factory default)
↓RPT TRACK
↓RPT DISC
↓RPT OFF
13-EN
Displaying the Disc Status (DVD only)Use the procedure described below to display the status (title number,chapter number, etc.) of the currently playing DVD on the monitorscreen.
During playback, press DISPLAY.The playback status is displayed for 5 seconds.
Displaying the Disc Status (Video CD only)Use the procedure described below to obtain an on-screen display ofthe status (track number, etc.) of the currently playing video CD onthe monitor screen.
During playback, press DISPLAY.The playback status is displayed for 5 seconds.
9
P TR D I S CB C OP N
1 3 ' 5 6 "
D I S C N T S C V C DT I TL ED
CDV I DEO
V D
TV system(NTSC or PAL) Playback disc
Current tracknumber Track playback
timeRepeat setting(Default setting -
repeat off)
Playback control(PBC)
1 1 6
P TR T I T L E:::
U D I OA D O L B Y D 3 / 2 . 0 1 / 3S U B T . J A P A N E S E 0 1 / 0 4A N G L E 1 / 1
0 0 1 8 ' 5 6 "
D I S C N T S C D V DT I TL ED
DVD V I DEO
V D
TV system(NTSC or PAL) Playback disc
Current titlenumber Current chapter
number
Chapterplayback time
Current audionumber
Current subtitlenumber
Repeat setting(Default setting -
repeat off)
Audio recordingsystem
Current subtitlelanguage
Current anglenumber
To Output DVD Video While Listening toAnother Source (CD/radio etc.) (only whenusing Ai-NET)When the DVA-5210 is connected to an Ai-NET compatible head unitor Ai-NET compatible AV head unit, DVD video can be outputindependently on the monitor.If the rear monitor is connected, DVD video and audio can be outputindependently on the rear monitor.For example, DVD video can be output on the front or rear monitor,while listening to the CD/radio from the head unit.
1 Change the source on the head unit or AV headunit’s to CD or radio, etc.
2 Select the DVD image from this unit with the V.SELbutton (use the Simultaneous Function) on the AVhead unit or front monitor.
3 Press V.OUT on the remote control for this unit.You can watch the DVD/video CD.
4 After using this function, press V.OUT to deactivatethe video output mode.
To watch the DVD on the rear monitor
5 See “Rear Monitor Select Function (AUX OUT)” inthe AV head unit or front monitor’s owner’s manualto select the DVD image from this unit.
CautionIf the power or the ignition key is turned off without canceling thevideo output mode, the set will start up in the video output modethe next time the power is turned on, and the DVA-5210’s powerwill remain on even if the source is switched with the head unit/AV head unit or if you try to turn off the power of the DVA-5210.If this happens, press V.OUT to cancel the video output mode.
• If the monitor has no rear monitor select function, the rear monitorcannot be connected.
• Buttons to operate, etc., vary depending on the product. Refer tothe owner’s manual of the connected product for details.
14-EN
Repeat Play
Press REPEAT to play back repeatedly the track beingplayed.The track will be played repeatedly.
Press REPEAT again and select OFF to deactivate repeat play.
CD
Playback
1 Insert a disc with the label side facing up.To load discs, see “Loading and Unloading Discs” onpage 9.Playback starts. The front panel AUDIO CD indicatorlights in amber during playback.
2 Press g or f to select the desired track.
Returning to the beginning of the current track:Press g.
Fast backward :Press and hold g.
Advancing to the beginning of the next track :Press f.
Fast forward :Press and hold f.
3 To pause playback, press -/J.Pressing -/J again will resume playback.
• CD playback information (track no., TEXT etc.) will be displayedon the monitor during playback.
• Three-inch (8cm) CD's can be used.
M.I.X. (Random Play)
Press M.I.X. in the play or pause mode.The tracks on the disc will be played back in randomsequence.
To cancel M.I.X. play, press M.I.X. again.
:/J
g
REPEAT
M.I.X.
f
15-EN
MP3/WMA
PlaybackThe DVA-5210 will play back MP3/WMA files stored on CD-ROMs,CD-Rs, and CD-RWs. The format used must be compliant with ISO9660 level 1 or level 2.For further information about playing or storing MP3/WMA files,refer to pages 16 and 17 before using the unit.A WMA format file that is protected by DRM (Digital RightsManagement) cannot be played back on this unit.
1 Insert a disc containing an MP3/WMA file with thelabel side facing up.To load discs, see “Loading and Unloading Discs” onpage 9.Playback starts. The front panel MP3/WMA indicator lightsin amber during playback.
2 Press g or f to select the desired track.
Returning to the beginning of the current track:Press g.
Fast backward :Press and hold g.
Advancing to the beginning of the next track :Press f.
Fast forward :Press and hold f.
3 To pause playback, press -/J.Pressing -/J again will resume playback.
• MP3/WMA playback information (folder no., file no., taginformation, etc.) will be displayed on the monitor duringplayback.
• The CD-player can play discs containing audio data, MP3 dataand WMA data.
• For MP3 discs, some time may be required until playback starts.• Some discs will not play back depending on the writing or MP3
conversion software used for the disc. In that case, try othersoftware.
• The unit will fast backward only the current track.• No sound is output during fast forward/fast backward.
Selecting FoldersPress FOLDER 8 or FOLDER 9 to select the folder.
Playing MP3/WMA DataThe unit can be set to play only the audio data or only the MP3/WMAfiles on discs containing both audio data and MP3/WMA data (whenusing discs containing both audio data and MP3/WMA data).
1 Press SETUP before inserting a disc.The setup menu appears on the monitor screen.
2 Press 8 or 9 to select “PLAY MODE”.
3 Press ;, : or ENT. to select CD-DA or MP3/WMA.
CD-DA:Plays only audio data on discs containing both audio data andMP3/WMA data.The initial setting at the factory is CD-DA.
MP3/WMA:Plays only MP3/WMA files on discs containing both audio dataand MP3/WMA data.
4 Press SETUP.The settings are stored and the setup mode isdeactivated.
• If a disc has already been inserted, perform the setting after youremove the disc.
L A N G U A G E S :
T V S C R E E N 1 6 : 9C O U N T R Y C O D E 6 8 6 9P A R E N T A L O F F :
P L A Y M O D E C D - D AD I G I T A L O U T A U T O
C U S T O M S E T U P :
DVD SETUPL S E T U P
SETUP
RETURN
:/Jg
FOLDER 8
REPEAT
M.I.X.
;
8
:
ENT.9
f
LIST
FOLDER 9
16-EN
M.I.X. (Random Play)
Press M.I.X. in the play or pause mode.The M.I.X. mode switches each time the button is pressed.
Press M.I.X. again and select OFF to deactivate the M.I.X.play.
Repeat PlayDuring playback, press REPEAT.The repeat mode switches each time the button is pressed.
Press REPEAT again and select OFF to deactivate the repeatplay.
Folder/File SearchYou can display the names of folders/files and search for a folder/fileto play.
1 Press LIST during playback.The Folder Name list is displayed.Each press changes the list.
Folder Name list → File Name list → List display OFF →Folder Name list
2 Press 8 or 9 to select a folder/file name, thenpress ENT.
• When there are more than 9 names on the list, “8” or “9” isdisplayed. Press 8 or 9 to scroll.
• Press RETURN to deactivate the Search mode.
About MP3/WMA
CAUTIONExcept for private use, duplicating audio data (including MP3/WMA data) or distributing, transferring, or copying it, whetherfor free or for a fee, without permission of the copyright holder isstrictly prohibited by the Copyright Act and by internationaltreaty.
What is MP3?
MP3 (MPEG-1 Audio Layer 3) is a compression standardprescribed by the ISO, the International StandardizationOrganization and MPEG, which is a joint activity institution ofthe IEC.
MP3 files contain compressed audio data. MP3 encoding iscapable of compressing audio data at extremely high ratios,reducing the size of music files to as much as one-tenth theiroriginal size. This is achieved while still maintaining near CDquality. The MP3 format realizes such high compression ratiosby eliminating the sounds that are either inaudible to thehuman ear or masked by other sounds.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audiodata.WMA allows you to create music files and store them at higherratios of compression than MP3 audio data (approx. halforiginal size). This is achieved while still maintaining CDquality sound.
Method for creating MP3/WMA files
Audio data is compressed by using MP3/WMA specifiedsoftware. For details on creating MP3/WMA files, refer to theuser's manual for that software.MP3/WMA files that can be played back by this device havethe file extension “mp3”/“rmp”, “wma”. Files with no extensioncannot be played back. (WMA ver. 7.1 and 8 are supported)
WMASampling rates: 32 kHz - 48 kHzBit rates: 32 - 192 kbpsNote that for sampling rates such as 22.05 kHz, this devicemay not display correctly.
ID3 tags/WMA tags
This device supports ID3 tag v1 and WMA tag.If tag data is in an MP3/WMA file, this device can display thetitle (track title), artist name, and album name ID3 tag/WMAtag data.
This device can only display single-byte alphanumericcharacters and the underscore.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CD-RW using CD-R writing software. A disc can hold a maximumof 255 files, and 255 folders.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs.
↓RPT (FILE)
↓RPT FOLDER
↓(OFF)
The file is played repeatedly.
Only files in a folder are repeatedlyplayed back.
(factory default)
↓MIX FOLDER
↓MIX DISC
↓(OFF)
Only files in a folder are played backin a random sequence.
The files on the disc will be playedback in a random sequence.
(factory default)
17-EN
Terminology
Bit rateThis is the “sound” compression rate specified for encoding. Thehigher the bit rate, the higher the sound quality, but also the largerthe files.
Sampling rateThis value shows how many times per second the data is sampled(recorded). For example, music CDs use a sampling rate of 44.1kHz, so the sound is sampled (recorded) 44,100 times per second.The higher the sampling rate, the higher the sound quality, but alsothe larger the volume of data.
EncodingConverting music CDs, WAVE (AIFF) files, and other sound filesinto the specified audio compression format.
TagSong information such as track title, artist name, album name, etc.,written into MP3/WMA files.MP3: ID3 tagWMA: WMA tag
Root folderThe root folder is found at the top of the file system. The root foldercontains all folders and files.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 orLevel 2.
Under the ISO9660 standard, there are some restrictions toremember.The maximum nested folder depth is 8 (including the rootdirectory). File/folder names are limited to 31 characters(including the extension).Valid characters for folder/file names are letters A-Z (allcaps), numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, etc., and otherstandards that conform to ISO9660. However, sometimes thefile names, folder names, etc., are not displayed correctly.
Formats supported
This device supports CD-ROM XA, Mixed Mode CD,Enhanced CD (CD-Extra) and Multi-Session.This device cannot correctly play back discs recorded withTrack At Once or packet writing.
Order of files
The unit plays the files in the order that the writing softwarewrites them. Therefore, the playing order may not be the sameas the order you input. The playback order of the folders andfiles is as follows. However, the folder and file playback orderdiffers from the folder no. and file no. indicated on the display.
2
3
4
6
5
2
3
4
5
7
6
1
1
Folder MP3/WMA File
RootFolder
18-EN
DVD Setup
DVD Setup Operation
The following steps 1 to 4 are common operationsto each setting item of DVD settings. Refer to eachsection for details.
1 Press SETUP before inserting a disc, or when instop mode.The setup menu appears on the monitor.
2 Press 8 or 9 to select your desired setting item.If - is indicated at the right of the item, select theitem then press - or ENT.Further items will be displayed.
Setting items:LANGUAGES / TV SCREEN / COUNTRY CODE / PARENTAL /PLAY MODE*1 / DIGITAL OUT / CUSTOM SETUP*2
*1 Refer to “Playing MP3/WMA Data” on page 15.*2 Refer to “Custom Setup” on page 20.
3 Press ;, : or ENT. to change the setting.
4 Press SETUP.The settings are stored and the setup mode isdeactivated.
M E N U A U T OA U D I O A U T OS U B T I T L E A U T O; R E T U R N
LANGUAGESL S E T U P
• When settings are changed, old settings are overwritten. Make anote of the current settings before making changes. The settings arenot cleared even when the vehicle’s battery is disconnected.
Setting the language
The audio language, subtitle language and menu language can be setaccording to your preferences.Once set, this becomes the default language. This function isconvenient when you always want to listen in English. (Not all discsallow changing the default language. If not, the factory defaultlanguage applies.)
Setting item: LanguageFurther setting items: MENU / AUDIO / SUBTITLE
MENU:Set the language used for themenus (title menu, etc.).AUDIO:Set the audio track language.SUBTITLE:Set the language of thesubtitles displayed on thescreen.
Setting contents:AUTO ∗1 / OTHERS ∗2 / ENGLISH / JAPANESE / GERMAN /SPANISH / FRENCH / HINDI / HUNGARIAN / ITALIAN / YIDDISH/ PORTUGUESE / RUSSIAN / CHINESE
Press ; or : to select your desired language.
∗1 AUTO:The disc is played with the audio language or subtitlelanguage set as the priority language for the disc.
∗2 OTHERS:Set this to play the disc with a language other than one ofthe languages displayed. Press ENT. then use the numberkeys “0” to “9” to input the 4-digit language code. Thenpress ENT. again. For the language codes, refer to “List ofLanguage Codes” (page 25).
• If you change the language setting when the disc is inside, thesetting is decided with one of the following operations.-Disc eject-Turn OFF the main unit-Switch the source on the head unit.
• To temporarily change the language of the current disc, either doso from the DVD menu or using the operation described in thesection “Switching the audio tracks” (page 12).
• If the disc does not include the selected language, the disc’s defaultlanguage is set.
• Languages set upon shipment from the factory:Audio language : AUTOSubtitle language : AUTOMenu language : AUTO
• Press RETURN, or press 8 or 9 to select “RETURN,” then pressENT. to return to the previous display.
Setting the TV Screen
Use the procedure described below to set the output screen accordingto the type of TV monitor being used.
Setting item: TV SCREENSetting contents: 16:9 / 4:3 LB / 4:3 PAN
• For some discs, the picture may not be set to the selected screensize. (For details, refer to the explanation on the disc’s jacket.)
• Press RETURN to return to the previous screen.
L A N G U A G E S :
T V S C R E E N 1 6 : 9C O U N T R Y C O D E 6 8 6 9P A R E N T A L O F F :
P L A Y M O D E C D - D AD I G I T A L O U T A U T O
C U S T O M S E T U P :
DVD SETUPL S E T U P
SETUP
RETURN
L
CLR
;
8
:
ENT.9
numberkeys(0 to 9)
19-EN
P A R E N T A L L E V E L O F FP A S S W O R D C H A N G E ∗ ∗ ∗ ∗; R E T U R N
PARENTALL S E T U P
2 Use the number keys “0” to “9” to input the 4-digitpassword, then press ENT.
PARENTAL ∗ ∗ ∗ ∗
Input numbers are displayed as “∗.“The default password is 1111 upon shipment from thefactory.The restriction level (PARENTAL LEVEL) input displayappears.
• Can be erased one digit at a time each time CLR is pressed. PressCLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.• If the password is wrong, the unit returns to the SETUP display.
3 Press 8 or 9 to select the “PARENTAL LEVEL”.
4 Press ;, : or ENT. to select the restriction level (1 to8), then press ENT.
Select “OFF” to cancel the parental lock or if you do notwant to set a rating level.The lower the number, the higher the rating level.
• Press RETURN, or press 8 or 9 to select “RETURN,” then pressENT. to return to the previous display.
5 Press SETUP.The settings are stored and the setup mode isdeactivated.
• If you want to change the password, select “PASSWORDCHANGE,” then input the new password (4 digits).
• Write down the password on a piece of paper and store the piece ofpaper somewhere in case you forget it.
• On unrated DVDs, playback will not be restricted even if the ratinglevel is set.
• Once set, this rating level remains in memory until changed. Toenable the play of discs of higher rating levels or to cancel theparental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsureabout a DVD, play it first to confirm. Do not leave DVDsaccessible to young children for whom you deem theminappropriate.
Tips• Changing the rating level temporarily
Some discs may request that you change the rating level setin the default settings during playback. In this case, themessage appears on the monitor screen “PARENTALLEVEL CHANGE OK?”
• To change parental level and play, press ENT.• To play without changing the parental level, press L.
(When L is pressed, playback will be at the parental levelset with “Setting Parental Lock.” )
16:9 (WIDE)Select this whenconnected to a widescreen TV. This is selectedupon shipment from thefactory.
4:3 LB (LETTER BOX)Select this when connected to aconventional 4:3 size (normal TVaspect ratio) monitor. There maybe black bands visible at the topand bottom of the screen (whenplaying a 16 : 9 size movie). Thewidth of these stripes will dependupon the original aspect ratio of the theatre release of themovie.
4:3 PAN (PAN- SCAN)Select this when connectedto a conventional 4:3 sizemonitor. The picture will fillthe entire TV screen.However, due to themismatch in aspect ratio,parts of the movie at theextreme left and right sides will not be visible (when playing a16 : 9 size movie).
Setting the Country Code
Set the country code when setting the rating level (Parental lock).
Setting item: COUNTRY CODESetting contents: CODE
1 Press 8 or 9 to select “COUNTRY CODE,” then pressENT.“COUNTRY CODE” will be reset.
COUNTRY CODE - - - -
2 Use the number keys “0” to “9” to input the 4-digitcountry code, then press ENT.Example: Germany “6869” is input
COUNTRY CODE 6 8 6 9
• If the input code is wrong, “CODE ERROR” is displayed and theunit returns to the setup display again.
• For the country codes, refer to “List of Country Codes” (Pages 26to 27).
• Can be erased one digit at a time each time CLR is pressed. PressCLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
Setting the Rating Level (Parental Lock)
Use this function to restrict the viewing of movies to children ofappropriate age levels only.
Setting item: PARENTALSetting contents: Password
1 Press 8 or 9 to select “PARENTAL,” then press ENT.The password input mode is activated.
20-EN
Setting the Digital Output
Use the following procedure to set the digital audio signal output fromthe DVA-5210.
Setting item: DIGITAL OUTSetting contents: AUTO / LPCM
AUTO: The digital output is switched automatically accordingto the type of audio signal being played.Be sure to select “AUTO” when you want to connect adigital audio processor and play Dolby Digital audio.“AUTO” is selected upon shipment from the factory.
LPCM: The audio signal recorded on the disc is converted to48 kHz/16 bit (for DVDs) or 44.1 kHz (for video CDsand CDs) linear PCM audio signals for output.
• Press RETURN to return to the previous screen.
Audio output/Optical digital audio output
L A N G U A G E S :
T V S C R E E N 1 6 : 9C O U N T R Y C O D E 6 8 6 9P A R E N T A L O F F :
P L A Y M O D E C D - D AD I G I T A L O U T A U T O
C U S T O M S E T U P :
DVD SETUPL S E T U P
A I - N E T S E T U P F U L LB E E P O NT I T L E S C R O L L T Y P E 1A U T O S C R O L L A U T O; R E T U R N
C U S T O ML S E T U P
Custom Setup
Custom Setup Operation
The following steps 1 to 5 are common operations to eachsetting item of CUSTOM SETUP. Refer to each section fordetails.
1 Press SETUP before inserting a disc, or when instop mode.The setup menu appears on the monitor.
2 Press 8 or 9 to select “CUSTOM SETUP,” thenpress : or ENT.
3 Press 8 or 9 to select your desired setting item.
CUSTOM SETUP items:Ai-NET SETUP / BEEP / TITLE SCROLL / AUTO SCROLL
5 Press SETUP.The settings are stored and the setup mode isdeactivated.
• Press RETURN, or press 8 or 9 to select “RETURN,” then pressENT. to return to the previous display.
Setting the Ai-NET
Use the connected Ai-NET compatible head unit or AV head unit todisplay the information from the disc being played on the DVA-5210.
Setting item: AI NET SETUPSetting contents: FULL / TIME
FULL: When connecting to an Ai-NET compatible AV headunit (e.g. IVA-D300R) marketed after December 2003.The information compatible with the displays on theseAV head units will be transferred.The factory default is FULL.
TIME: When connecting to an Ai-NET compatible AV headunit marketed before January 2004 (e.g. IVA-D900R) oran Ai-NET compatible head unit.Playback time and track no. display information will betransferred to the head unit. Other information, such asCD TEXT, titles, etc., cannot be displayed on the headunit.If set to FULL with one of these head units connected,the head unit cannot recognize the information from theDVA-5210, so even playback time and track no. will notbe displayed properly.
• Some Ai-NET compatible head units display differently whenconnected.
• The Ai-NET compatible head units and Ai-NET compatible AVhead units marketed before January 2001 do not displayinformation from the DVA-5210 properly, even if set to TIME.
Sound (Beep) Guide Function
This function will give audible feedback with varying tonesdepending upon the button pressed.
Setting item: BEEPSetting contents: ON / OFF
ON: Activate the Sound Guide mode.The initial setting at the factory is BEEP ON.
OFF: Deactivate the Sound Guide mode. The sound guidebeep will not be produced when a button on the unit ispressed.
Setting the Scroll Type
Set the scroll type for CD TEXT information of audio CDs, or taginformation (album name, artist name) of MP3/WMA.
Setting item: TITLE SCROLLSetting contents: TYPE1 / TYPE2
TYPE1: Both CD TEXT and tag information are scrolledsimultaneously.The factory default is TYPE1.
TYPE2: 2 lines of CD TEXT and tag information are scrolled inturn.
Setting the Title Scroll
CD TEXT information of audio CDs, or tag information (albumname, artist name) of MP3/WMA can be scrolled.
Setting item: AUTO SCROLLSetting contents: AUTO / MANUAL
AUTO: The CD TEXT and tag information will beautomatically scrolled.
MANUAL:The CD TEXT and tag information will not bescrolled.The factory default is MANUAL.
22-EN
Switch
SOURCE
TITLE
REPEAT
M.I.X.
f
g
-/J
RotaryEncoder
Operation
Switches the audio source.Turns the DVD player’s power ON in the DVD mode.Turns OFF in a mode other than main DVD.
Switches the display pattern of the head unit.
DVD: Repeat switching
Video CD/CD/MP3/WMA: Repeat switching
DVD/Video CD: Not used
CD/MP3/WMA: M.I.X. play switching
Starts playback from the beginning of the followingchapter/track.When pressed and held in, fast-forwards the disc.
Starts playback from the beginning of the currentchapter/track.When pressed and held in, fast-reverses the disc.
Switches between play and pause.
Adjust the volume.
Playing DVDs, video CDs, CDs and MP3/WMA
1 Press SOURCE and select the DVD mode.
DVD mode:The power of the DVA-5210 turns ON and playback startsautomatically.
Other modes:The power of the DVA-5210 turns OFF automatically.
2 To set the pause mode, press -/J.Press -/J again to resume playback.
• You cannot set the source to DVD on some head units. In this case,press PWR on the remote control to turn the power on.
• For video CDs with playback control (PBC), turn PBC off.• The disc name, track name, and other information can be displayed
on the display of the head unit for music CDs that support CD text.This can only be used with alphanumeric text.See the instruction manual of the head unit side for further details.
• In the case of MP3/WMA, tag information (disc/artist name etc.)can be displayed. Refer to the instruction manual of the head unitfor details. Tag information cannot be displayed on some headunits.
• SCAN play for CDs, MP3/WMA and video CDs cannot beperformed.
Other Useful FeaturesOperating from the Head Unit
CDA-9835R (Head unit)
The DVA-5210 can also be operated from the ALPINE Ai-NETcompatible head unit.Refer to the manual of the head unit.Note that some of the functions cannot be operated from the DVA-5210.
Functions operable from the head unit
SOURCE/POWER -/J TITLE
g f
Rotary encoder
4 ( )(REPEAT)
5 ( )(M.I.X.)
23-EN
InformationAbout DVDs
Music CDs and DVDs have grooves (tracks) in which thedigital data is recorded. The data is represented asmicroscopic pits recorded into the track – these pits are readby a laser beam to play the disc. On DVDs, the density of thetracks and pits is twice that of CDs, so DVDs can contain moredata in less space.
A 12 cm disc can contain one movie or about four hours of music.In addition, DVDs provide sharp picture quality with vivid colorsthanks to a horizontal resolution of over 500 lines (compared to lessthan 300 for VHS tape). With the addition of an optional, digital audioprocessor (PXA-H900, PXA-H510, PXA-H700), you can recreate thepower and presence of a movie theater with Dolby Digital 5.1-channelSurround.
Minimum pitlength -0.9 µm 1.2 mm
Track pitch -1.6 µm
Minimum pitlength -0.9 µm 0.6 mm
0.6 mm
Track pitch -0.74 µm
CDs
DVDs
In addition, DVDs offer a variety of functions.
• Multiple audio* (page 12)Movies can be recorded in up to eight languages. Thedesired language can be selected from the remote control.
• Subtitles function* (page 12)Movies can include subtitles in up to 32 languages. Thedesired subtitle language can be selected from the remotecontrol.
• Multi angle function* (page 12)When the DVD contains a movie shot from multiple angles,the desired angle can be selected from the remote control.
• Multi story function*With this function, a single movie includes various storylines. You can select different story lines to view variousversions of the same movie.Operation differs from disc to disc. Story line selectionscreens including instructions appear during the movie.Just follow the instructions.
* The functions, audio languages, subtitle languages, angles, etc.,differ from disc to disc. For details, refer to the disc’s instructions.
24-EN
Dolby Pro Logic
Dolby Pro Logic is the technology used to decode programsencoded in Dolby Surround. Pro logic decoding will provideyou with four channels of sound (front left/right, center andmonaural rear surround) from a 2-channel (stereo) source.* The separately sold digital audio processor (PXA-H510, PXA-
H900) is required to enjoy Dolby Pro Logic surround sound.
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels overthe entire frequency range.This is done with an advanced, high sound quality matrixsurround decoder which draws out the spatial properties of theoriginal recording without adding any sounds to or changingthe sound of the source.* The separately sold digital audio processor (PXA-H700) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
LPCM is a signal recording format used for music CDs.Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDsare recorded at 48 kHz/16 bits to 96 kHz/24 bits, therebyachieving higher sound quality than music CDs.
Rating levels (parental lock)
This is a DVD function for restricting the viewing age asstipulated by censorship laws in different countries. The wayin which viewing is restricted differs from DVD to DVD.Sometimes the DVD cannot be played at all, other timescertain scenes are skipped, and other times certain scenesare replaced with other scenes.
Terminology
Dolby Digital
Dolby Digital is a digital audio compression technologydeveloped by Dolby Laboratories that allows large quantitiesof audio data to be efficiently recorded on discs. It iscompatible with audio signals from mono (1 channel) all theway up to 5.1-channel surround sound. The signals for thedifferent channels are completely independent, and since thesound is high quality digital there is no loss of sound quality.* The separately sold digital audio processor (PXA-H510, PXA-
H900, PXA-H700) is required to enjoy full 5.1-channel surroundsound.
The DVA-5210 performs Dolby Digital decoding when itoutputs analog audio signals; 2-channel audio, not 5.1-channel.
DTS
This is a home-use digital sound format of the DTS SoundSystem. This is a high quality sound system, developed byDigital Theater Systems Corp. for use in movie theaters.DTS has six independent sound tracks. The theaterpresentation is fully realized in the home, etc. DTS is theabbreviation for Digital Theater System.* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H900, PXA-H700). The DVD videosoftware must also have a DTS sound track.
The DVA-5210 has a built-in DTS 2-channel audio decoder.Analog audio outputs are available.
Speaker layout for enjoying Dolby Digital sound/dts sound
LebanonSaint LuciaLiechtensteinSri LankaLiberiaLesothoLithuaniaLuxembourgLatviaLibyan Arab JamahiriyaMoroccoMonacoMoldova, Republic ofMadagascarMarshall IslandsMacedonia, The formerYugoslav Republic ofMaliMyanmarMongoliaMacauNorthern Mariana IslandsMartiniqueMauritaniaMontserratMaltaMauritiusMaldivesMalawiMexicoMalaysiaMozambiqueNamibiaNew CaledoniaNigerNorfolk IslandNigeriaNicaraguaNetherlandsNorwayNepalNauruNiueNew ZealandOmanPanama
Country CountryCode CodeAbbreviation Abbreviation
27-EN
PeruFrench PolynesiaPapua New GuineaPhilippinesPakistanPolandSaint Pierre and MiquelonPitcairnPuerto RicoPortugalPalauParaguayQatarReunionRomaniaRussian FederationRwandaSaudi ArabiaSolomon IslandsSeychellesSudanSwedenSingaporeSaint HelenaSlovenia
Svalbard and Jan MayenSlovakiaSierra LeoneSan MarinoSenegalSomaliaSurinameSao Tome and PrincipeEl SalvadorSyrian Arab RepublicSwazilandTurks and Caicos IslandsChadFrench Southern TerritoriesTogoThailandTajikistanTokelauTurkmenistanTunisiaTongaEast TimorTurkeyTrinidad and TobagoTuvalu
Taiwan, Province of ChinaTanzania, United Republic ofUkraineUgandaUnited States MinorOutlying IslandsUnited StatesUruguayUzbekistanHoly See (Vatican City State)Saint Vincent and theGrenadinesVenezuelaVirgin Island, BritishVirgin Islands, U.SViet NamVanuatuWallis and FutunaSamoaYemenMayotteYugoslaviaSouth AfricaZambiaZimbabwe
Country CountryCode CodeAbbreviation Abbreviation CountryCodeAbbreviation
28-EN
No picture is produced.• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.• Monitor’s parking brake cord is not connected.
- Connect the monitor’s parking brake cord and set the parkingbrake. (For details, refer to the monitor’s instructions.)
• Monitor’s parking brake is not set.- Connect the monitor’s parking brake cord and set the parking
brake. (For details, refer to the monitor’s instructions.)Playback does not start.• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facingupward.
• Disc is dirty.- Clean the disc.
• A disc not able to playback with this unit is loaded.- Check if the disc is able to be played back.
• Parental lock is set.- Cancel the parental lock or change the rating level.
• Setup menu is displayed.- Press SETUP to turn the menu off.
Picture is unclear or noisy.• Disc is being fast-forwarded or fast-reversed.
- The picture may be unclear, but this is normal.• Vehicle’s battery power is weak.
- Check the battery power and wiring.(The unit may malfunction if the battery power is under 11volts with a load applied.)
• Monitor’s fluorescent tube is worn out.- Replace the monitor’s fluorescent tube.
Image stops sometimes.• Disc is scratched.
- Replace with a non-scratched disc.Unable to turn the power off by switching sources onthe head unit. (Only when an Ai-NET compatible (AV)head unit is connected)• The switched (ignition) power lead for this unit is connected.
- Do not connect the switched (ignition) power lead for thisunit when an Ai-NET compatible (AV) head unit isconnected.
Indication
• Mechanism error.1) Press c and eject the CD.
If the disc does not eject, press c again for at least 3seconds and eject the disc.If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press cagain.If the error indication still does not turn off after pressingc a few times, consult your Alpine dealer.
• The temperature in the car is too low.- Raise the temperature in the car to normal temperature.
• A disc which contains audio data and JPEG data has beeninserted.- Set the PLAY MODE setting to “CD-DA” (Refer to “Playing
MP3/WMA Data” on page 15.)
In Case of Difficulty
If you encounter a problem, please turn the power off, then onagain. If the unit is still not functioning normally, please review theitems in the following checklist. This guide will help you isolate theproblem if the unit is at fault. Otherwise, make sure the rest of yoursystem is properly connected or consult your authorized Alpinedealer.
No function or display.• Vehicle’s ignition is off.
- If connected following the instructions, the unit will notoperate with the vehicle’s ignition off.
• Improper power lead connections.- Check power lead connections.
• Blown fuse.- Replace the fuse on the battery lead of the unit with the
proper value.Disc playback sound is wavering.• Moisture condensation in the disc unit.
- Allow enough time for the condensation to evaporate (about 1hour).
Disc insertion not possible.• A disc is already in the DVD player.
- Eject the disc and remove it.• The disc is being improperly inserted.
- Re-insert the disc following the instructions in the “loadingand unloading discs” section.
Unable to fast forward or reverse the disc.• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in yourunit can cause damage to the mechanism.
Disc playback sound skips due to vibration.• Improper mounting of the unit.
- Securely re-mount the unit.• Disc is very dirty.
- Clean the disc.• Disc has scratches.
- Change the disc.• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc.Consult your nearest ALPINE dealer.
Disc playback sound skips without vibration.• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.CD-R/CD-RW playback not possible.• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.Error displays• Mechanical error
- Press c. After the error indication disappears, insert the discagain. If the above-mentioned solution does not solve theproblem, consult your nearest ALPINE dealer.
MP3 is not played back.• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.Refer to “About MP3/WMA” on pages 16-17, then rewrite inthe format supported by this device.
Unit does not operate.• Monitor’s power is not turned on.
- Turn on the monitor’s power.• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
DISC ERROR
29-EN
• No disc is inserted.- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and theunit does not start to play or eject the disc.- Remove the disc by following these steps:1) Open the door.2) Press c again for at least 3 seconds.
• Remote control operation is not possible.- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Disc does not match regional code number.- Load a disc that matches the regional code number.
• Protective circuit is activated at high temperature.- The indicator will disappear when the temperature returns to
within operation range.- Leave the power OFF until the temperature decreases and
then turn the power ON again.
• Mechanism error.1) Press c and eject the disc.
If the disc does not eject, press c again for at least 3seconds and eject the disc.If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press cagain.If the error indication still does not turn off after pressingc a few times, consult your Alpine dealer.
Width 178 mm (7")Height 50 mm (2")Depth 165 mm (6-1/2")Weight 1.5kg (3 lbs. 5 oz)
• Due to continuous product improvement, specifications and designare subject to change without notice.
HI-TEMP
LOADING ERROR
EJECT ERROR
REGIONAL CODE
VIOLATION
NO DISC
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of player)
30-EN
Before installing or connecting the unit, please read thefollowing and pages 3 and 4 of this manual thoroughlyfor proper use.
WarningMAKE THE CORRECT CONNECTIONS.Failure to make the proper connections may result in fire orproduct damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.(Check with your dealer if you are not sure.) Failure to do so mayresult in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THENEGATIVE BATTERY TERMINAL.Failure to do so may result in electric shock or injury due toelectrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED INSURROUNDING OBJECTS.Arrange wiring and cables in compliance with the manual toprevent obstructions when driving. Cables or wiring that obstructor hang up on places such as the steering wheel, gear lever, brakepedals, etc., can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.Never cut away cable insulation to supply power to otherequipment. Doing so will exceed the current carrying capacity ofthe wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLINGHOLES.When drilling holes in the chassis for installation, takeprecautions so as not to contact, damage or obstruct pipes, fuellines, tanks or electrical wiring. Failure to take such precautionsmay result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE ORSTEERING SYSTEMS TO MAKE GROUND CONNECTIONS.Bolts or nuts used for the brake or steering systems (or any othersafety-related system), or tanks should NEVER be used forinstallations or ground connections. Using such parts coulddisable control of the vehicle and cause fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THEREACH OF CHILDREN.Swallowing them may result in serious injury.If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDERVEHICLE OPERATION, SUCH AS THE STEERING WHEELOR SHIFT LEVER.Doing so may obstruct forward vision or hamper movement, etc.,and result in a serious accident.
CautionHAVE THE WIRING AND INSTALLATION DONE BYEXPERTS.The wiring and installation of this unit requires special technicalskill and experience. To ensure safety, always contact the dealerwhere you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEMSECURELY.Be sure to use only the specified accessory parts. Use of otherthan designated parts may damage this unit internally or may notsecurely install the unit in place. This may cause parts to becomeloose resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED ORPINCHED BY A SHARP METAL EDGE.Route the cables and wiring away from moving parts (like theseat rails) or sharp or pointed edges. This will prevent crimpingand damage to the wiring. If wiring passes through a hole inmetal, use a rubber grommet to prevent the wire’s insulation frombeing cut by the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTUREOR DUST.Avoid installing the unit in locations with high incidence ofmoisture or dust. Moisture or dust that penetrates into this unitmay result in product failure.
Precautions• Be sure to disconnect the cable from the (–) battery post before
installing your DVA-5210. This will reduce any chance ofdamage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to thediagram. Incorrect connections may cause the unit tomalfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, beaware of the factory installed components (e.g. on-boardcomputer). Do not tap into these leads to provide power forthis unit. When connecting the DVA-5210 to the fuse box,make sure the fuse for the intended circuit of the DVA-5210has the appropriate amperage. Failure to do so may result indamage to the unit and/or the vehicle. When in doubt, consultyour ALPINE dealer.
• The DVA-5210 uses female RCA-type jacks for connection toother units (e.g. amplifier) having RCA connectors. You mayneed an adaptor to connect other units. If so, please contactyour authorized ALPINE dealer for assistance.
IMPORTANTPlease record the serial number of your unit in the spaceprovided below and keep it as a permanent record. The serialnumber plate is located on the bottom of the unit.
Installation and Connections
SERIAL NUMBER:INSTALLATION DATE:INSTALLATION TECHNICIAN:PLACE OF PURCHASE:
31-EN
Installation
Installation Location
Before deciding on the mounting location, check that opening andclosing the display will not hamper the gear shift in any position.
• Install at an angle of within 35 degrees from the horizontal.
Caution for installationBe sure to remove the mounting sleeve squarely from the product.
1
Slide the mounting sleeve into the dashboard.
• Remove the wrapping from the unit.
2
Reinforce the head unit with the metal mounting strap (notsupplied). Secure the ground lead of the unit to a clean metalspot using a screw (∗1) already attached to the vehicle'schassis.
• For the screw marked ∗2, use an appropriate screw for the chosenmounting location.
Connect each input lead coming from an amplifier or equalizerto the corresponding output lead coming from the left rear ofthe DVA-5210. Connect all other leads of the DVA-5210according to details described in the CONNECTlONS section.
3
Slide the DVA-5210 into the dashboard. When the unit is inplace, make sure the locking pins are fully seated in the downposition. This can be done by pressing firmly in on the unitwhile pushing the locking pin down with a small screwdriver.This ensures that the unit is properly locked and will notaccidentally come out from the dashboard. Install theDetachable Front Panel.
Removal1 Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see above drawing).As each pin is unlocked, gently pull out on the unit tomake sure it does not re-lock before unlocking thesecond pin.
2 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
• Secure the ground lead of the unit to a clean metal spot using ascrew (*3) already attached to the vehicle's chassis.
MetalMountingStrap
Chassis
Hex Nut (M5)
Bolt Stud
Ground Lead
∗2
∗1
DVA-5210
Screw
Lock Pin
Face Plate
Mounting Sleeve(Included)
Dashboard
DVA-5210
Mounting Bracket
Ground Lead
Screws (M5 × 8)(Included)
DVA-5210
Head unit (Ai-NET)
Screws (M5 × 8)(Included withthe head unit)
*3
32-EN
Connections
• Connect properly.Never connect to parts other than the ones indicated in these operating instructions.
• Also refer to the operating instructions of the other products in the system.
Setting the System SwitchSwitch to operate from either an Ai-NET compatible head unit or Ai-NET compatible AV head unit connected to this unit.Be sure to set the system switch before fastening the DVA-5210 in place.
1 Disconnect the power plug.
2 Set the system switch at the bottom of this unit with a pointed object.
1:When connecting to an Ai-NET compatible head unit or Ai-NET compatible AV head unit.If set to 2, with any of the Ai-NET compatible (AV) head units connected, you may not be able to operate from the head unit, or listen toaudio from some external devices, etc.The factory default is 1.
2:When connecting to an Ai-NET incompatible head unit or another manufacturer's head unit.
3 Connect the power plug.
BATTERY
IGNITION
REMOTE IN
GND
Red
Yellow
White/Brown
Black
Fuse(7.5A)
Yellow• Battery Lead
Connect this lead to the positive (+) post of the vehicle’s battery.
Red
• Switched Power Lead (Ignition) Connect this lead to an open terminal on the vehicle’s fuse box
or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position. When connecting with the Ai-NET compatible AV head unit or the Ai-NET compatible head unit, do not connect the ignition lead.
White/Brown
• Remote Control Input Lead This lead is used in combination with the Ai-NET compatible AV
head unit or the ALPINE monitor with a remote control output lead.
Black
• Ground Lead Connect this lead to a good chassis ground on the vehicle. Make
sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
• Ai-NET Connector (Black)Connect this to the output or input connector of other product equipped with Ai-NET.
• Remote Control Eye JackConnect this to the remote control sensor unit. Not used when
using a monitor with a built-in remote control sensor unit. A remote control sensor unit is needed when a monitor or navigation unit made by other company is connected.
• Ai-NET Connector (Gray)Connect this to the output or input connector of other product
equipped with Ai-NET.
• Audio Output ConnectorsThis output may be connected to a Rear Monitor with a volume
control or an auxiliary audio preamp. This is used to monitor the DVD audio while the main audio system is being driven by another source (such as Radio or CD).
White (L)
Red (R)
• Video Output ConnectorThis connector is used in combination with the video inputs of
another video product (AV head unit or TV monitor).
Yellow
Cable Color Cable Specifications
• Digital Output Terminal (Optical)This terminal is used to connect DVA-5210 to ALPINE digital audio
processor (PXA-H700 etc.). These products include a fiber optic cable that will plug directly into the Digital Output Terminal of the DVA-5210.
Connect to a metal part of chassis body with a screw
Ignition Key
To remote control output lead
Remote Control Eye(Sold Separately)
33-EN
System ExamplePrecautions when Making System Upgrades
• After connections are completed, it will be necessary to change the system settings of the DVA-5210. Before installing theproduct, please see “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21.
• When connecting the DVA-5210 to a head unit or Ai-NET compatible AV head unit, do not connect the switched (ignition) powerlead.
• When connecting the DVA-5210 to an Alpine TV monitor and Ai-NET compatible AV head unit together, the remote control inputcable (white/brown) of both units must be connected. Failing to do so will result in a loss of remote control operation. Whenmaking connections to another brand of TV monitor, please use the optional remote control sensor unit.
Connecting a non Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.)and TV Monitor
• If using in a system with a head unit that is not fully Ai-NET compatible (no processor control) and a digital audio processor, do not connectthe head unit’s Ai-NET cable. Only connect the DVA-5210 and digital audio processor using an optical fiber cable and its own Ai-NET cable.Use the head unit’s analog output (Front or rear) connected to the analog input of the processor.
• When connecting only to a digital audio processor (with a non-Alpine head unit or Alpine head unit without Ai-NET), it is possible to use bothan optical fiber cable and an Ai-NET output cable.
• When connecting another brand of TV monitor, there is no need to connect the remote control input cord (white/brown). Use the optionalremote control sensor unit.
• Be sure to connect the switched (ignition) power lead.• Also refer to the operating instructions of the other products in the system.
Please observe the following when using Fiber Optic Cable.• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.• Do not place anything on top of the Fiber Optic Cable.
MonitorTME-M790, etc.(Sold Separately)
Head Unit non -compatibleAi-NET (Sold Separately)
AV-Interface UnitTME-M790, etc.(Sold Separately)
Digital InputTerminal (Optical)(for DVD Player)
Remote Control Input Lead (White/Brown)
Remote Control Output Lead (AUX1)(White/Brown)
Only when connecting with rear monitor
RCA Extension Cable
AUX Audio InputTerminal (AUX1)
AUX Video InputTerminal (AUX1)
Audio Output Connector
Video Output Connector
RCA Extension Cable
DVD PlayerDVA-5210
Digital Output Terminal (Optical)
Digital Audio ProcessorPXA-H700, etc.
(Sold Separately)
System Switch
Remote Turn-On Lead (Blue/White) Remote Turn-On Lead (Blue/White)
Fiber Optic Cable
1
2
RCA Extension Cable
Setting of DVA-5210The DVA-5210's system settings must be made afterconnections are completed. Before fixing the unit in place, referto “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21.
Setting ItemSystem switchAi-NET setting
Setting2 (STANDALONE)
-
34-EN
Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.)and TV Monitor
Digital Audio ProcessorPXA-H700 etc
(Sold Separately)
Digital InputTerminal (Optical)(for DVD Player)
Digital OutputTerminal (Optical)
Fiber Optic Cable
Ai-NET Cable
Ai-NET Connector(Gray)
CD Changer(Sold Separately)
DVD PlayerDVA-5210
Only when connecting with rear monitor
Audio Output Connector
RCA Extension Cable
AU
X A
udio
Inpu
tT
erm
inal
(A
UX
1) AUX Video InputTerminal (AUX1)
Remote ControlOutput Lead (AUX1)(White/Brown)
Remote ControlInput Lead (White/Brown)
Video Output Connector
RC
A E
xten
sion
Cab
leMonitor
TME-M790 etc(Sold Separately)
AV-Interface UnitTME-M790 etc
(Sold Separately)
Head Unitwith Ai-NET
(Sold Separately)
Ai-NET Cable
Ai-NET InputConnector
System Switch
1
2
Ai-NET InputConnector
Ai-NET Cable
Ai-NET Connector(Black)
Ai-NETConnector
When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position.
EQ/DIV
System Switch
Setting of DVA-5210The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting theSystem Switch” on page 32 and “Setting the Ai-NET” on page 21.
Setting ItemSystem switchAi-NET setting
Setting
1 (Ai-NET)
AV Head unit available after December2003 (IVA-D300R, etc.)
FULL
AV Head unit available before January2004 (IVA-D900R, etc.) or Head unit.
TIME
• Be sure to switch the head unit’s system switch before turning the power on.• Also refer to the operating instructions of the other products in the system.• To connect a rear monitor, connect to the front monitor’s RCA output (TV Tuner Box).
Please observe the following when using Fiber Optic Cable.• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.• Do not place anything on top of the Fiber Optic Cable.
The switched (ignition) power lead connection is not needed.
35-EN
Connecting an Ai-NET compatible Head Unit and TV Monitor
Ai-NET OutputConnector
Ai-NET Cable
Ai-NET Connector(Black)
Ai-NET Cable
Ai-NET Connector(Gray)
CD Changer(Sold Separately)
DVD PlayerDVA-5210
Only when connecting with rear monitor
Audio Output Connector
RCA Extension Cable
AU
X A
udio
Inpu
tT
erm
inal
(A
UX
1)
AUX Video InputTerminal (AUX1)
Remote ControlOutput Lead (AUX1)(White/Brown)
Remote ControlInput Lead (White/Brown)
Video Output Connector
RC
A E
xten
sion
Cab
le
MonitorTME-M790, etc.(Sold Separately)
AV-Interface UnitTME-M790, etc.(Sold Separately)
Head Unitwith Ai-NET
(Sold Separately)
System Switch
NORM
System Switch
1
2
When an Ai-NET digital audio processor is not used, place this switch in the NORM position.
Setting of DVA-5210The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting theSystem Switch” on page 32 and “Setting the Ai-NET” on page 21.
• Be sure to switch the head unit’s system switch before turning the power on.• Also refer to the operating instructions of the other products in the system.• To connect a rear monitor, connect to the front monitor’s RCA output (TV Tuner Box).
The switched (ignition) power lead connection is not needed.
Setting ItemSystem switchAi-NET setting
Setting
1 (Ai-NET)
AV Head unit available after December2003 (IVA-D300R, etc.)
FULL
AV Head unit available before January2004 (IVA-D900R, etc.) or Head unit.
TIME
36-EN
Operating the DVA-5210 Video Player
1 PWR buttonTurns the power ON and OFF.
2 SETUP buttonDisplays the SETUP (initial setting) screen.
3 LIST buttonSwitches between Folder Search and File Search mode.
4 RETURN buttonReturns to the selection screen just prior to thecurrent screen.
5 -/J buttonSwitches between play and pause.
6 g buttonCD mode: Press the button to go back to the
beginning of the current track. Press andhold to fast reverse.
MP3/WMA mode:Press the button to go back to thebeginning of the current file.
DVD/Video CD:• Move to the desired position on the disc.• During playback, press and hold for more
than 1 second to reverse the disc atdouble speed. Hold for more than 5seconds to reverse the disc at 8 times thenormal speed.
7 L buttonPerforms PRE STOP. Press again to cancel PRE STOPand stop the playback.
8 FOLDER 8 buttonSelects MP3/WMA folders.
9 FOLDER 9 buttonSelects MP3/WMA folders.
! CLR (ALL CLR) buttonRemoves numbers (one character at a time) that havebeen selected and input.Press and hold for 2 seconds. All the characters whichwere selected and input are erased.
" REPEAT buttonRepeats playback.
# M.I.X. buttonM.I.X. play for CDs and MP3/WMA
$ AUDIO buttonSwitches the audio tracks.
% DISPLAY buttonDisplays playback status on the screen.
& MENU buttonDisplays the DVD menu.
( TOP M. buttonDisplays the title Menu.
) 8, 9, ;, :Selects the items displayed on the screen.
~ ENT. buttonDetermines the selected item.
+ f buttonCD mode: Press the button to advance to the
beginning of the next track. Press and holdto fast forward.
MP3/WMA mode:Press the button to advance to thebeginning of the next file.
DVD/Video CD:• Move to the desired position on the disc.• During playback, press and hold for
more than 1 second to forward the discat double speed. Hold for more than 5seconds to forward the disc at 8 timesthe normal speed.
• When pressed and held in while in thepause mode, the disc is played in slowmotion.
• The picture is forwarded by one frameeach time the button is pressed in thepause mode.
, Numeric KeypadInputs numbers
- V.OUT buttonOutputs the DVD video to the monitor when in othersource.
. ANGLE buttonSwitches the angle.
/ SUBTITLE buttonSwitches the subtitle.
• Operation may not be possible depending on the type of disc andthe playback conditions. At such a time the following mark is
displayed on the screen:
%
&
(
)
~
+
,
-
.
/
1
2
3
4
5
6
7
8
9
!
"
#
$
37-EN
1 Transmits remote control signals.
2 Indicates EXT DVD transmission.
3 Switches folders.
4 Stop
5 Displays the DVD menu. Press and hold to accessthe SETUP (initial setting) screen.
6 Displays the playback status. Press and hold todisplay the title menu.
7 Inputs numbers.
8 Switches the angle. Press and hold to switch M.I.X.mode.
9 Switches the subtitle.
! Switches between play and pause.
" Switches the power on and off. Press and hold toswitch between NTSC and PAL.
# Switches between chapter, track and file. Press andhold to fastforward/fastreverse.
Operating from the optional remote control(RUE-4191) Set the mode selector switch to “EXT DVD” to operate this unit.
3
!
"
#
$
%
&
(
)
~
+
4
5
6
7
8
9
1 2
$ Turns the backlight on for the remote controlbuttons.
% Selects/decides an item on the screen.
& Returns to the previous screen.
( Outputs the DVD picture while another source ison. (Only for an Ai-NET connection.)
) Deletes one of the selected/inputted numbers.Press and hold to delete all of the selected/inputtednumbers.
~ Switches audio. Press and hold to switch repeatmode.
+ Set to “EXT DVD” to operate this unit.
• Operation may not be possible depending on the type of disc andthe playback conditions. In this case, the following mark isdisplayed on the screen:
Product Information Card
EnglishFilling in this Product Information Card isvoluntary. If you fill in this card and sendit to Alpine, your data will be tabulatedinto reference data for future Alpineproduct development. In addition, in thefuture you may receive information aboutnew products or Survey Mail requestingadditional opinions about Alpine productsor services. If you agree to the aboveterm, please sign your name in theindicated space and return the card. Anyadditional comments or inquiries may besent to : Person in charge of CustomerService department Alpine Electronics(Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640
Q1. PRODUCT PURCHASED1. Cassette Player2. CD Player3. MD Player4. DVD Player5. CD Changer6. Amplifier7. Speaker8. Subwoofer9. Monitor Controller
10. Video Monitor11. Navigation12. Processor/Equalizer13. CD/Video CD Changer14. Other
Q2. MODEL NUMBER:Q3. DATE OF PURCHASE:
Month: Year:Q4. If navigation system, which
monitor?1. Alpine → (Model No.)2. Other → (Brand Name)
Q5. STORE TYPE WHEREPURCHASED:
1. Car Audio Specialist2. Audio/Video Store3. Electronics/Appliance Store4. Car Accessories Shop5. Other
Q6. Type of vehicle in which this unit isinstalled:Make: Model:Purchased ModelYear: Year:
Q7. How was this vehicle purchased?1. Purchase2. Lease
Q8. Purpose of buying this unit?1. Addition2. Replacement↓• Previous brand replaced?1. Factory installed2. Alpine3. Other → (Brand Name)
Q9. Have you purchased Alpineproducts before?
1. First time2. Two or More times
Q10.When you purchased this Alpineunit, did you compare it with otherbrand?
1. Yes → (Brand Name)2. No.
Q11.GENDER1. Male2. Female
Q12.AGEQ13.MARITAL STATUS
1. Single2. Married
Q14.OCCUPATION1. Company Owner/Self-employed/
Freelance2. Manager3. Company Employee4. Civil Servant5. Educator6. Student7. Other
Q15.Comments
Produkt-Informationskarte
DeutschDas Ausfüllen dieser Produktinformations-Karteist freiwillig. Sollten Sie diese Kartevervollständigen, so werden die Daten fürzukünftige Produktentwicklungen von Alpine alsReferenzdaten herangezogen. Ebenso können Siein der Zukunft Informationen über neue AlpineProdukte erhalten oder uns auch Ihre Meinungüber Alpine Produkte und Dienstleistungen imRahmen von Kunden-Befragungen mitteilen.Stimmen Sie dem Kontakt durch Alpine zu, sowürden wir Sie bitten, in dem dafür vorgesehenenFeld zu unterschreiben und die Karte kostenfreian uns zurückzuschicken. ZusätzlicheKommentare und Meinungen können Sie gernean den zuständigen Kontakt im KundendienstAlpine Electronics (Europe) GmbH senden.Frankfurter Ring 117, 80807 München, GermanyPhone: 089-32 42 640
Q6. Art des Fahrzeugs, in das dasGerät installiert wurde:Marke: Modell:gekauft imJahr: Baujahr:
Q7. Wie haben Sie das Fahrzeuggekauft?
1. Kauf2. Leasing
Q8. Zweck des Kaufs dieses Geräts?1. Zusätzlich2. Austausch↓• Marke des ausgetauschten Geräts?1. Serienmäßige Ausstattung2. Alpine3. Anderer Hersteller →
(Herstellername)Q9. War dies das erste Mal, dass Sie
ein Alpine-Gerät gekauft haben?1. Erstes Mal2. Zweites Mal oder öfter
Q10.Haben Sie dieses Alpine-Gerät vordem Kauf mit Geräten andererHersteller verglichen?
FrançaisEn remplissant volontairement cette fiche,et en l’envoyant à Alpine, vous acceptezque ces informations soient utilisées parAlpine, dans le cadre de développementde nouveaux produits. Par ailleurs, vousautorisez Alpine à solliciter votre opinionpar mailing sur de nouveaux produits ouservices. Si vous acceptez les termes ci-dessus, veuillez signer cette carte àl’endroit indiqué, et nous la retourner.Tout autre commentaire ou demande doitêtre adressé à l’attention de: Responsabledu service consommateur AlpineElectronics (Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640
Q1. PRODUIT ACHETE1. Lecteur de cassette2. Lecteur de CD3. Lecteur MD4. Lecteur DVD5. Changeur de CD6. Amplificateur7. Haut-parleur8. Haut-parleur de graves9. Station Multimedia
10. Moniteur Vidéo11. Navigation12. Processeur/Egaliseur13. Changeur de CD/CD Vidéo14. Autre
Q2. NUMERO DU MODELE:Q3. DATE D’ACHAT:
Mois: Année:Q4. Si c’est un système de navigation,
quel moniteur?1. Alpine → (N° du modèle)2. Autre → (Marque)
Q5. TYPE DE MAGASIN OU VOUSAVEZ ACHETE LE PRODUIT:
Free-lance2. Directeur3. Employé de bureau4. Fonctionnaire5. Educateur6. Etudiant7. Autre
Q15.Commentaires
Tarjeta de información delproducto
EspañolEl envío de la información solicitada esvoluntario. Si Vd. nos la remite, seráutilizada de modo confidencial para eldesarrollo de futuros productos Alpine. SiVd. desea recibir información sobrenuevos productos de nuestra gama,indique su nombre en el espaciodesignado y remítanos la tarjeta.Cualquier solicitud adicional puede serenviada a : Persona responsable delServicio de Atención al Cliente de AlpineElectronics (Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640
Q1. Producto Comprado1. Radio/Cassette2. Radio/CD3. Reproductor de MD4. Reproductor de DVD5. Cambiador de CD6. Amplificador7. Altavoz8. Subwoofer9. Monitor de control
10. Monitor de video11. Sistema de navegación12. Procesador/Ecualizador13. Cambiador de CD/Video CD14. Otros
Q2. Número de modelo:Q3. Fecha de compra:
Mes: Año:Q4. En caso de sistema de
navegación, ¿qué monitor?1. Alpine → (N° de modelo)2. Otros → (Nombre de marca)
Q5. TIPO DE TIENDA DONDECOMPRÓ:
1. Especialista en audio de automóviles2. Tienda de audio/video3. Tienda de electrónica/electrodomésticos4. Tienda de accesorios automovilísticos5. Otros
Q6. Tipo de vehiculo en que la unidadestá instalada:Marca: Modelo:Año de Año delcompra: modelo:
Q7. ¿Cómo fue comprado estevehiculo?
1. compra2. Leasing
Q8. ¿Propósito de comprar estaunidad?
1. Mejora del sistema2. Sustitución↓• ¿Sustitución de marca anterior?1. Instalado en la fábrica2. Alpine3. Otros → (Nombre de marca)
Q10.Cuando usted compró esta unidadAlpine, ¿la comparó con otrosfabricantes?
1. Si → (Nombre de marca)2. No
Q11.SEXO1. Masculino2. Femenino
Q12.EdadQ13.Estado civil
1. Soltero2. Casado
Q14.Ocupación1. Propietario de empresa/Autónomo/
Profesional independiente2. Gerente3. Empleado de compañia4. Empleado público5. Profesor6. Estudiante7. Otros
Q15.Comentarios
Appendix
Scheda informazioniprodotto
ItalianoLa compilazione di questa formulario èvolontaria. Se compilate questo formulario,ritornandolo ad Alpine, i Vostri dati sarannoraccolti in un file di riferimento per lo sviluppodei nuovi prodotti Alpine. In aggiunta Voi potretericevere in futuro informazioni riguardanti i nuoviprodotti o la richiesta di una Vostra opinionecirca i prodotti o i servizi forniti da Alpine. Sesiete d’accordo, Vi preghiamo di ritornarci ilformulario completato negli appositi spazi con iVostri dati. In caso desideriate fornire altricommenti o richiedere informazioni aggiuntive,potete indirizzare il tutto a : Responsabiledipartimento Servizio Clienti Alpine Electronics(Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640
Q1. PRODOTTO ACQUISTATO1. Lettore di cassette2. Lettore CD3. Lettore MD4. Lettore DVD5. CD Changer6. Amplificatore7. Altoparlante8. Subwoofer9. Radio Monitor
10. Monitor video11. Sistema di navigazione12. Processore/equalizzatore13. Cambia CD/Video CD14. Altro
Q2. NUMERO MODELLO:Q3. DATA DI ACQUISTO:
Mese: Anno:Q4. In caso di acquisto di un sistema di
navigazione, quale monitorpossiede?
1. Alpine → (No. Modello)2. Altro → Nome marca
Q5. NEGOZIO DI ACQUISTO:1. Specialista Car Stereo2. Negozio di audio/video3. Negozio di elettronica/elettrodomestici4. Negozio accessori automobile5. Altro
Q6. Tipo di veicolo posseduto:Marca: Modello:Anno Annoacquisto: modello:
Q7. Modalità acquisto1. Acquisto2. Leasing
Q8. Scopo acquisto1. Aggiunta2. Sostituzione↓• Marca sostituita1. Installato di fabbrica2. Alpine3. Altro → (Nome marca)
Q9. Avevate già acquistato prodottiAlpine?
1. No2. Due o tre volte
Q10.Nell’acquistarlo, avete paragonatoquesto prodotto ad un’altra marca?
1. Si → (Nome marca)2. No
Q11.SESSO1. Maschile2. Femminile
Q12.ETÀQ13.STATO CIVILE
1. Celibe/nubile2. Coniugato/coniugata
Q14.LAVORO1. Proprietario di azienda/artigiano/libero
professionista2. Manager3. Impiegato4. Impiegato statale5. Insegnante6. Studente7. Altro
Q15.Commenti
I agree to the above stated terms of the Alpine Product Information Card.Ich stimme dem Kontakt durch Alpine für Informations- und Befragungszwecke zu.J’accepte les termes de cette carte d’information produit Alpine.Estoy conforme con los términos de la tarjeta de información sobre producto de Alpine.
(Signature/Unterschrift/Signature/Firma)
(Date/Datum/Date/Fecha/Data)
Name/Nom/Nombre/Nome
(First Name/Vorname/Prénom/Primer nomble/Nome)
(Surname/Familienname/Nom de famille/Apellido/Cognome)
Home Address/Privatanschrift/Adresse/Dirección/Indirizzo
