No.ERYT023I Original om Ron EU DECLARATION OF CONFORMITY 1. Product Models/Products: G9SX-AD. G9SX-ADA series, G9SX-BC series, G9SX-EX series 2. Name and address of the manufacturer: OMRON Corporation Shiokoji Horikawa, Shimogyo-Ku, Kyoto, 600-8530 Japan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer . 4. Objects of the declaration: G9SX-AD. G9SX-ADA series, G9SX-BC series, G9SX-EX series, Safety Control Unit with Expansion Unit 5. The objects of the declaration described above are in conformity with the relevant Union harmonisation legislation: 2014/30/ EU EMC Directive 2006/42/EC Machinery Directive 6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared: EMC Directive: EN 61000-6-4: 2007/A1: 2011, EN 61000-6-2: 2005 Machinery Directive: EN ISO 13849-1:2015 7. Name, address, and identification number of Notified Body, Number of EC Type Examinati on: Machinery Directive: Notified body: TOV SOD Product Service GmbH Address: Zertifuierstelle. Ridlerstrar..e 65,80339, Munchen. Germany Notified Body identification No .: 0123 Certificate for EU Type Examination: Z1 0 16 12 39656 329 Signed and on behalf of: OMRON Corporation Place and date of issue: '-'K"'-yo;:;..;t=o.._, J::...::a=p =a"""' n ___ __ /._7 ____ _ Signature : Name: Function: Hideaki Takiguchi Industrial Automation Company, Safety Di vision. General Manager 112 GQ -1 51845Al
Transcript
No.ERYT023I
Original om Ron EU DECLARATION OF CONFORMITY
1. Product Models/Products:
G9SX-AD. G9SX-ADA series, G9SX-BC series, G9SX-EX series
2. Name and address of the manufacturer:
OMRON Corporation
Shiokoj i Horikawa, Shimogyo-Ku, Kyoto, 600-8530 Japan
3. This declaration of conformity is issued under the sole responsibility of the
Certificate for EU Type Examination: Z1 0 16 12 39656 329
Signed and on behalf of: OMRON Corporation
Place and date of issue: '-'K"'-yo;:;..;t=o.._, J::...::a=p=a"""'n ___ --+-/___.~........,v..M.....=.-..u; __ /._7 ____ _
Signature:
Name: Function:
Hideaki Takiguchi Industrial Automation Company, Safety Division. General Manager
112 GQ-151845Al
doug.barnett
Highlight
Name and address of contact in EU
OMRON Europe B.V.
Quality & Environment Department
Attn: J.J .P.W. Vogelaar. European Quality & Environment Manager
Zilverenberg 2. 5234 GM. 's-Hertogenbosch. The Netherlands
Additional information
Types List for EU Directive
1. Type G9SX-AD series
G9SX-AD322-T15-RC
G9SX-AD322-T15-RT
G9SX-AD322-T150-RC
G9SX-AD322-T150-RT
G9SX-AD322-T15-300-RT
2. Type G9SX-ADA series
G9SX-ADA222-T15-RC
G9SX-ADA222-T15-RT
G9SX-ADA222-T150-RC
G9SX-ADA222-T150-RT
G9SX-ADA222-T15-300-RT
3. Type G9SX-BC series
G9SX-BC202-RC
G9SX-BC202-RT
G9SX-BC 112-T005-RC
G9SX-BC112-T005-RT
G9SX-BC 112-T01-RC
G9SX-BC112-T01-RT
G9SX-BC202-300-RT
4. Type G9SX-EX series
G9SX-EX041-T-RC
G9SX-EX041-T-RT
G9SX-EX401-RC
G9SX-EX40 1-RT
G9SX-EX401-300-RT
No.ERYT023I
2/2 GQ-151845Al
CERTIFICATE No. Z10 16 12 39656329
Holder of Certificate: Omron Corporation Shiokoji Horikawa,Shimogyo-ku
Kyoto
Factory(ies):
Certification Mark:
Product:
Model(s):
Parameters:
Tested according tO:
600-8530 JAPAN
56891
Safety components Safety control device
G9SX - series (For nomenclature see attachment)
Rated voltage: Degree of IP:
Relay output:
Solid state output: Ambient temperature:
2006/42/EC
24Vdc -15% to +10% IP 20/40 (terminal/body)
250Vac/3A 30Vdc/3A 24Vdc/1A -10°C to +55°C
ISO 13849-1:2015 (Cat. 4, PL e) EN ISO 13849-1:2015 (Cat. 4, PL e) IEC 61508-1(ed.2) (SIL 1-3) IEC 61508-2( ed.2) (SIL 1-3) IEC 61508-3(ed.2) (SIL 1-3) IEC 61508-4(ed.2) (SIL 1-3) EN 61508-1:2010 (SIL 1-3) EN 61508-2:2010 (SIL 1-3) EN 61508-3:2010 (SIL 1-3) EN 61508-4:2010 (SIL 1-3) EN 50178:1997 EN 60204-1 :2006/ A 1 :2009
Product Service
The product was tested on a voluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf.
Test report no.:
Valid until:
Date, 2016-12-06
Page 1 of 3
70023481
( Peter Weiss )
TÜV SÜD Product Service GmbH . Zertifizierstelle . Ridlerstraße 65 . 80339 München . Germany
doug.barnett
Highlight
ATTACHMENT TO CERTIFICATE
No. Z10 16 1239656329
Product Service
Nomenclature of Product type G9SX- (I) (11) (111) (IV) (V) - (VI) - (VII) - (VIII)
(I) Function Number Function
AD Advanced Unit ADA Advanced Unit
BC Basic Unit
EX Expansion Unit
(11) Numbers of safety output elements Number Numbers of safety output elements 0 None 1 1 output element 2 2 output elements 3 3 output elements 4 4 output elements
(111) Numbers of off-delayed safety output elements Number Number of off-delayed safety output elements 0 None 1 1 output element 2 2 output elements 3 3 output elements 4 4 output elements
(IV) N b f T f t t t I um ers 0 auxi lary non-sa elY_ ou pu e emen s Number Number of auxiliary_ non-safety outputs 0 None (Reserved)
1 1 output element 2 2 output elements
(V) Connectable input channel configuration Number Input configuration None Connectable 1 eh input device and 2ch input 1 Only connectable 1 eh input (reserved) 2 Only connectable 2ch input (reserved)
(VI) Off di r - e ay Ime Number Off-delay time T Synchronize with Advanced Unit's off-delay timing T005 0,5 sec fixed (only BC112) T01 1 sec fixed (only BC112) T15 0-15 sec changeable (Max. 15 sec) T150 0-150 sec changeable (Max. 150 sec)
(VII) Specific customer variation Number Specific customer variation None Standard type xxx Additionalletter(s), number(s), and/or dash:
Identification for specific customer product. Note: The difference of product is no influence to safety functions.
Page 2 of 3
TÜV SÜD Product Service GmbH . Zertifizierstelle . Ridlerstraße 65 . 80339 München . Germany
doug.barnett
Highlight
ATTACHMENT TO CERTIFICATE
No. Z10 16 12 39656 329
(VIII) Plug type Number Plug type RT Removable COMBICON plugs RC Removable COMBICON spring cage plugs
Page 3 of 3
Product Service
T1"I\ , @ TÜV SÜD Product Service GmbH · Zertifizierstelle . Ridlerstraße 65 . 80339 München· Germany lUV
If you notice a change to your NRAQ Listing Card, click here to learn more.
Page Bottom
Programmable Controllers See General Information for Programmable Controllers OMRON CORP E95399SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN
Trademark and/or Tradename: ,
Investigated to ANSI/UL 508
3F88L Series cam positioners Model(s) 3F88L-160, 3F88L-162
Accessory connector harness Model(s) XW2Z Series, followed by -, followed by a three digit suffixs, followed by X, K or Y.*
Accessory motion module to wire terminal cables Model(s) XW2Z followed by 001 thru 999, followed by J-, followed by A28, A30 or A31.*
Analog I/O terminals Model(s) SRT2 followed by -AD or -DA, may be followed by -02 or -04, may be followed by -300 thru -999.
Analog I/O units Model(s) GT1, followed by -AD, -DA or -TS, may be followed by -04 or -08, may be followed by -T or -P, may be followed by -MX, may be followed by CST, may be followed by -300 thru-999.
Analog input/output terminals Model(s) DRT1 may be followed by AD, DA or TS, may be followed by 02 or 04, may be followed by H, P or T.
SRM1, may be followed by C, may be followed by 01 or 02, may be followed by V1 or V2, may be followed by -300 thru -999.
Battery units Model(s) ZEN-BAT01*
C500 input temperature modules Model(s) C500-TS501*
Communication adaptors Model(s) ITNC-SGB01
Communication interface units Model(s) ZEN-CIF01*
Communication modules, profibus DP slave units Model(s) PRT1-COM*
Communication units Model(s) DRT1-COM*
Communication units connecting to device net Model(s) DRT1, followed by -232C, may be followed by -2, -3 or -4, may be followed by -300thru -999.
Communication units connecting to device net, open type Model(s) NT-DRT21*
Counter units for communication units Model(s) GT1, followed by -CT01, may be followed by -300 thru -999.
Counter units, for use with Sereis C200H programmable controllers Model(s) C500-CT021
G9SX Series programmable controllers, open type Model(s) G9SX followed by AD, BC, EX or ADA, followed by 0, 1, 2, 3 or 4, followed by 0,1, 2, 3 or 4, followed by 0, 1 or 2, may be followed by 1 or 2, followed by blank, T, T005, T01, T15 or T150, may be followed by additional suffix,followed by RT or RC.
GRT1 Series slice remote terminals, counter units, open type Model(s) GRT1-CT1*, GRT1-CT1-1*
GRT1 Series slice remote terminals, counter/positioner units, open type Model(s) GRT1-CP1-L*
GRT1 Series slice remote terminals, digital input units, open type Model(s) GRT1-IA4-1*, GRT1-IA4-2*, GRT1-ID8*, GRT1-ID8-1*
GRT1 Series slice remote terminals, digital output units, open type Model(s) GRT1-OD4G-1*, GRT1-OD4G-3*, GRT1-OD8*, GRT1-OD8-1*,GRT1-OD8G-1*
GRT1 Series slice remote terminals, mechatrolink II communication units, open type Model(s) GRT1-ML2*
GRT1 Series slice remote terminals, memory end units, open type Model(s) GRT1-END-M*
GRT1 Series slice remote terminals, power connection units, open type Model(s) GRT1-PC8*, GRT1-PC8-1*
GRT1 Series slice remote terminals, power feed units, open type Model(s) GRT1-PD2G*, GRT1-PD8*, GRT1-PD8-1*
GRT1 Series slice remote terminals, profibus communication units, open type Model(s) GRT1-PRT*
GRT1 Series slice remote terminals, profinet I/O communication units, open type Model(s) GRT1-PNT*
GRT1 Series slice remote terminals, temperature input units, open type Model(s) GRT1-TS2T*
GRT1 Series slice remote terminals, terminal end units, open type Model(s) GRT1-END*
HSH Series accessories, connecting cables Model(s) NSH5, followed by 232 or 422, followed by UL, followed by 3M or 10M, may be followedby additional letter(s) and/or number(s).
I/O modules same as Sysmac-C250 Series I/O cables Model(s) Sysmac I/O cables (Sysmac-C120 and C500 Series)
ID sensor units Model(s) CJ1W-V680C11*, CJ1W-V680C12*, CS1W-V680C11*, CS1W-V680C12*
Inductive power coupler receivers Model(s) B7AP-M1, B7AP-M1C
Inductive power coupler transmitters Model(s) B7AP-S1, B7AP-S1C
Interactive displays Model(s) NT20S, followed by S, followed by N or T, followed by 1, followed by 1, 2 or 6, followed by 1 thru 8, may befollowed by B, may be followed by V1 thru V9.
NT600S, followed by S, followed by T, followed by 1 or 2, followed by 1 or 2, followed by 1 or 8, may be followed by B, may be followed by V1thru V9.
Interface units Model(s) CPM2C-CIF, E58-CIFM1
Low speed monitoring units, open type Model(s) G9SX-LM followed by 0 or 2, followed by 2 or 3, followed by 2 or 4, followed by F10 or none,followed by RT or RC.
Memory units Model(s) ZEN-ME01*
Motion control boards, open type Model(s) R88A-MCW151-DRT-E, R88A-MCW151-E
Multi channel power controllers (MCPC) Model(s) G3ZA followed by 4H or 8A, followed by 2 or 4, followed by 03, may be followed by FLK.*
NSH Series accessories, connecting cables Model(s) NSH-232UL-10M, NSH-232UL-3M, NSH-422UL-10M, NSH-422UL-3M
NSH Series programmable terminals Model(s) NSH, followed by 5, followed by T, S or M, followed by S, V or Q, followed by a letter, followedby 0 thru 9, followed by 0 or 1, may be followed by B.*
Open type, Programmable controllers Model(s) CJ1W-MC221
G9SX followed by NSA or NS, followed by 0 or 2, followed by 0 or 2, followed by 0 or 2, may be followed by T03, followed by Blank or additionalsuffix, followed by RT or RC
Porgrmmable controllers Model(s) CPM2C followed by MAD11, SRT21, TS001 or TS101, may be followed by a number from 300 thru 999.
CPM2C, followed by -S, followed by 0 or 1, may be followed by 0 or 1, followed by 0, followed by C or M, may be followed by -DRT, may befollowed by 300 thru 999.
Temperature controller units Model(s) CQM1-TC may be followed by 0, 1, 2 or 3, followed by 0, may be followed by 1, 2, 3 or 4, may befollowed by letters and/or numbers, may be followed by -300 thru -999.
Terminals Model(s) DRT1 or SRT2, followed by ID or OD, followed by 04 or 08, followed by CL, may be followed by 1*
Trajexia TJ1 and TJ2 Series CANopen slave units, open type Model(s) TJ1-CORT
Trajexia TJ1 and TJ2 Series DeviceNet slave units, open type Model(s) TJ1-DRT
Trajexia TJ1 and TJ2 Series EtherCat master units, open type Model(s) TJ2-ECT04, TJ2-ECT16, TJ2-ECT64
Trajexia TJ1 and TJ2 Series flexible axis units, open type Model(s) TJ1-FL02
Trajexia TJ1 and TJ2 Series G5 Serial interface units, open type Model(s) TJ2-KS02
Trajexia TJ1 and TJ2 Series Mechatrolink-II master units, open type Model(s) TJ1-ML04, TJ1-ML16
Trajexia TJ1 and TJ2 Series motion control units, open type Model(s) TJ1-MC04, TJ1-MC16, TJ2-MC02, TJ2-MC64
Trajexia TJ1 and TJ2 Series profibus DP slave units, open type Model(s) TJ1-PRT
Trajexia TJ1 and TJ2 Series terminator units, open type Model(s) TJ1-TER
Wireless communication transceivers Model(s) WD30-ME or WD30-SE, may be followed by 01, may be followed by letter(s) and/or number(s)(1 to 4 digits).
Wireless terminals Model(s) WT30-M may be followed by 01, ID or MD, may be followed by 16, may be followed by -1, may be followed by -FLK, may be followed by AT001, AT002 or AT003, may be followed by 30 thru 99 or 200 thru 299.
Investigated to UL 61010-1 and UL 61010-2-201
Compact vision system, FH series, Controller Model(s) FH followed by -L, followed by 550, may be followed by -10, may be followed byadditional letter(s) or number(s) for sales purpose
Enclosed, Programmable controllers Model(s) V680S-HMD63, followed by -EIP or -PNT, V680S-HMD64-EIP, V680S-HMD64-PNT, V680S-HMD66, followed by -EIP or -PNT
I/O Relay Terminals, Open type Model(s) G70V, followed by -SID or -SOC, followed by 16, followed by P, may be followed by -1, may befollowed by -C16 or -C4, may be followed by any suffix(es)
Open-type, Compact vision system, FH series Model(s) FH(a)
Investigated to
Enclosed, Programmable controllers Model(s) V680S followed by HMD, followed by 63, followed by ETN may be followed by additional letter(s)and/or number(s) for sales purposes.
# - Above type names may be followed by additional letter(s) and/or number(s) for sales purposes.
(a) - followed by -20 or -50, followed by 5, followed by 0, may be followed by -10 or -20, may be followed by additional letter(s) or number(s) forsales purpose.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufacturedunder UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-UpService. Always look for the Mark on the product.
NRAQ7.E95399 Programmable Controllers Certified for Canada
If you notice a change to your NRAQ7 Listing Card, click here to learn more.
Page Bottom
Programmable Controllers Certified for Canada See General Information for Programmable Controllers Certified for Canada OMRON CORP E95399SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN
Investigated to CAN/CSA C22.2 No. 142
3F88L Series cam positioners Model(s) 3F88L-160, 3F88L-162
Accessory connector harness Model(s) XW2Z Series, followed by -, followed by a three digit suffixs, followed by X, K or Y.*
Accessory motion module to wire terminal cables Model(s) XW2Z followed by 001 thru 999, followed by J-, followed by A28, A30 or A31.*
Analog I/O terminals Model(s) SRT2 followed by -AD or -DA, may be followed by -02 or -04, may be followed by -300 thru -999.
Analog I/O units Model(s) GT1, followed by -AD, -DA or -TS, may be followed by -04 or -08, may be followed by -T or -P, may be followed by -MX, may be followed by CST, may be followed by -300 thru-999.
Analog input/output terminals Model(s) DRT1 may be followed by AD, DA or TS, may be followed by 02 or 04, may be followed by H, P or T.
SRM1, may be followed by C, may be followed by 01 or 02, may be followed by V1 or V2, may be followed by -300 thru -999.
Battery units Model(s) ZEN-BAT01*
Communication adaptors Model(s) ITNC-SGB01
Communication interface units Model(s) ZEN-CIF01*
Communication modules, profibus DP slave units Model(s) PRT1-COM*
Communication units Model(s) DRT1-COM*
Communication units connecting to device net Model(s) DRT1, followed by -232C, may be followed by -2, -3 or -4, may be followed by -300thru -999.
Communication units connecting to device net, open type Model(s) NT-DRT21*
Counter units for communication units Model(s) GT1, followed by -CT01, may be followed by -300 thru -999.
Counter units, for use with Sereis C200H programmable controllers Model(s) C500-CT021
CPM2C Series power supplies Model(s) CQM2C-PA201
CPU units Model(s) ZEN followed by 10 or 20, followed by C, followed by 1, 2, 3 or 4, followed by A, followed by R, followed by A, followed byV2*
ZEN, followed by 10 or 20, followed by C, followed by 1 or 2, followed by A or D, followed by R or T, followed by A or D.*
ZEN, followed by 10 or 20, followed by C, followed by 1, 2, 3 or 4, followed by D, followed by R or T, followed -D, followed by -V2.*
ZEN-8E1DR*, ZEN-8E1DT*
CV500 temperature controller data link units Model(s) CV500-TDL21
G9SX Series programmable controllers, open type Model(s) G9SX followed by AD, BC, EX or ADA, followed by 0, 1, 2, 3 or 4, followed by 0,1, 2, 3 or 4, followed by 0, 1 or 2, may be followed by 1 or 2, followed by blank, T, T005, T01, T15 or T150, may be followed by additional suffix,followed by RT or RC.
GRT1 Series slice remote terminals, counter units, open type Model(s) GRT1-CT1*, GRT1-CT1-1*
GRT1 Series slice remote terminals, counter/positioner units, open type Model(s) GRT1-CP1-L*
GRT1 Series slice remote terminals, digital input units, open type Model(s) GRT1-IA4-1*, GRT1-IA4-2*, GRT1-ID8*, GRT1-ID8-1*
GRT1 Series slice remote terminals, digital output units, open type Model(s) GRT1-OD4G-1*, GRT1-OD4G-3*, GRT1-OD8*, GRT1-OD8-1*,GRT1-OD8G-1*
GRT1 Series slice remote terminals, mechatrolink II communication units, open type Model(s) GRT1-ML2*
GRT1 Series slice remote terminals, memory end units, open type Model(s) GRT1-END-M*
GRT1 Series slice remote terminals, power connection units, open type Model(s) GRT1-PC8*, GRT1-PC8-1*
GRT1 Series slice remote terminals, power feed units, open type Model(s) GRT1-PD2G*, GRT1-PD8*, GRT1-PD8-1*
GRT1 Series slice remote terminals, profibus communication units, open type Model(s) GRT1-PRT*
GRT1 Series slice remote terminals, profinet I/O communication units, open type Model(s) GRT1-PNT*
GRT1 Series slice remote terminals, temperature input units, open type Model(s) GRT1-TS2T*
GRT1 Series slice remote terminals, terminal end units, open type Model(s) GRT1-END*
HSH Series accessories, connecting cables Model(s) NSH5, followed by 232 or 422, followed by UL, followed by 3M or 10M, may be followedby additional letter(s) and/or number(s).
I/O modules same as Sysmac-C250 Series I/O cables Model(s) Sysmac I/O cables (Sysmac-C120 and C500 Series)
ID sensor units Model(s) CJ1W-V680C11*, CJ1W-V680C12*, CS1W-V680C11*, CS1W-V680C12*
Inductive power coupler receivers Model(s) B7AP-M1, B7AP-M1C
Inductive power coupler transmitters Model(s) B7AP-S1, B7AP-S1C
Interactive displays Model(s) NT20S, followed by S, followed by N or T, followed by 1, followed by 1, 2 or 6, followed by 1 thru 8, may befollowed by B, may be followed by V1 thru V9.
NT600S, followed by S, followed by T, followed by 1 or 2, followed by 1 or 2, followed by 1 or 8, may be followed by B, may be followed by V1thru V9.
Interface units Model(s) CPM2C-CIF, E58-CIFM1
Low speed monitoring units, open type Model(s) G9SX-LM followed by 0 or 2, followed by 2 or 3, followed by 2 or 4, followed by F10 or none,followed by RT or RC.
Memory units Model(s) ZEN-ME01*
Motion control boards, open type Model(s) R88A-MCW151-DRT-E, R88A-MCW151-E
Multi channel power controllers (MCPC) Model(s) G3ZA followed by 4H or 8A, followed by 2 or 4, followed by 03, may be followed by FLK.*
NSH Series accessories, connecting cables Model(s) NSH-232UL-10M, NSH-232UL-3M, NSH-422UL-10M, NSH-422UL-3M
NSH Series programmable terminals Model(s) NSH, followed by 5, followed by T, S or M, followed by S, V or Q, followed by a letter, followedby 0 thru 9, followed by 0 or 1, may be followed by B.*
Open type, Programmable controllers Model(s) CJ1W-MC221
G9SX followed by NSA or NS, followed by 0 or 2, followed by 0 or 2, followed by 0 or 2, may be followed by T03, followed by Blank or additionalsuffix, followed by RT or RC
Porgrmmable controllers Model(s) CPM2C followed by MAD11, SRT21, TS001 or TS101, may be followed by a number from 300 thru 999.
CPM2C, followed by -S, followed by 0 or 1, may be followed by 0 or 1, followed by 0, followed by C or M, may be followed by -DRT, may befollowed by 300 thru 999.
CPM2C, followed by 8, 10, 16, 20, 24 or 32, may be followed by C or E, may be followed by 1, may be followed by D, may be followed by R, T orT1, may be followed by C or M, may be followed by D, may be followed by a number from 300 thru 999.
Power supplies for use in Sysmac C200H Model(s) DL404W
Trajexia TJ1 and TJ2 Series terminator units, open type Model(s) TJ1-TER
Wireless communication transceivers Model(s) WD30-ME or WD30-SE, may be followed by 01, may be followed by letter(s) and/or number(s)(1 to 4 digits).
Wireless terminals Model(s) WT30-M may be followed by 01, ID or MD, may be followed by 16, may be followed by -1, may be followed by -FLK, may be followed by AT001, AT002 or AT003, may be followed by 30 thru 99 or 200 thru 299.
Investigated to CAN/CSA-C22.2 No.61010-1 and CAN/CSA-C22.2 No.61010-2-201
Compact vision system, FH series, Controller Model(s) FH followed by -L, followed by 550, may be followed by -10, may be followed byadditional letter(s) or number(s) for sales purpose
Enclosed, Programmable controllers Model(s) V680S-HMD63, followed by -EIP or -PNT, V680S-HMD64-EIP, V680S-HMD64-PNT, V680S-HMD66, followed by -EIP or -PNT
I/O Relay Terminals, Open type Model(s) G70V, followed by -SID or -SOC, followed by 16, followed by P, may be followed by -1, may befollowed by -C16 or -C4, may be followed by any suffix(es)
Open-type, Compact vision system, FH series Model(s) FH(a)
Investigated to
Enclosed, Programmable controllers Model(s) V680S followed by HMD, followed by 63, followed by ETN may be followed by additional letter(s)and/or number(s) for sales purposes.
# - Above type names may be followed by additional letter(s) and/or number(s) for sales purposes.
(a) - followed by -20 or -50, followed by 5, followed by 0, may be followed by -10 or -20, may be followed by additional letter(s) or number(s) forsales purpose.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufacturedunder UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-UpService. Always look for the Mark on the product.
Links to OMRON Corp Programmable Controllers: D40A, G9SX-NS, NE1A-SCPU01, DST1, CQM1-SF200, CS1W-SF200, G9SX, G9SX-GS, etc. G9S Series: G9S, G9SP, G9SA, G9SB, (and various OMRON Programmable Controllers - intended for use as components of complete equipment submitted for investigation)
OMRON CORP Programmable Controllers Certified for Canada NRAQ7.E95399
OMRON CORP Programmable Controllers Certified for Canada - Component NRAQ8.E95399
See General Information for Programmable Controllers See General Information for Programmable Controllers Certified for Canada See General Information for Programmable Controllers - Component See General Information for Programmable Controllers Certified for Canada - Component
Programmable Safety Controllers See General Information for Programmable Safety Controllers OMRON CORP E239047SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN
Programmable safety controller, open type, Series G9SX followed by AD, BC, EX or ADA, followed by 0, 1, 2, 3 or 4, followed by 0, 1, 2, 3 or4, followed by 0, 1 or 2, may be followed by 1 or 2, may be followed by T, T005, T01, T15 or T150, may be followed by additional suffix, followedby RT or RC.
Open-type programmable safety controllers, Type NE1A followed by -SCPU, followed by 01 or 02, may be followed by -L or -EIP, may befollowed by -V1, may be followed by -SM, may be followed by additional letter(s) and/or number(s) for sales purpose.
Open type programmable safety controller, Series G9SX followed by NSA or NS, followed by 0 or 2, followed by 0 or 2, followed by 0 or 2,followed by blank or T03, may be followed by additional suffix, followed by RT or RC.
Open-type programmable safety controller accessory, Remote I/O Terminal, Model DST1 followed by -ID12SL-1, -ID12SL-1-SM, -MD16SL-1, -MD16SL-1-SM, -MRD08SL-1, -MRD08SL-1-SM, -MRD08SL-1-BH or -XD0808SL-1.
Open type programmable safety controllers, G9SX-GS226-T15-RC,G9SX-GS226-T15-RT.
Open-type, programmable safety controller, Type NE0A followed by -SCPU, followed by 01, may be followed by additional letter(s) and/ornumber(s) for sales purpose.
Open-type, programmable safety controller , NE2A Series made up of the following system components: Safety CPU Units - Model NE2A-SCPU01, End Cover - Model NE2A-TER01, End Unit - Model NE2A-END, Power Supply Units - Model NE2A-PD025, Safety I/O Units Inputs - ModelNE2A-SID4-1, Safety I/O Units Outputs - Model NE2A-SOD4-1, DeviceNet Safety Units - Model NE2A-DNS21, EtherNet/IP Safety Units - ModelNE2A-ENS21.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufacturedunder UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-UpService. Always look for the Mark on the product.
Here are the links to the following OMRON UL File: NRGF.E239047 - Programmable Safety Controllers Put the cursor on the link (underlined & highlighted in blue), press Ctrl, then Click. This will bring you to UL’s Online Directory for that UL File Company Name Category Name Link to File
