+ All Categories
Home > Documents > Oman Plast

Oman Plast

Date post: 23-Mar-2016
Category:
Upload: sjs-group
View: 633 times
Download: 12 times
Share this document with a friend
Description:
International Plastics and Rubber Industry Exhibition Catalogue
44
Transcript
Page 1: Oman Plast
Page 2: Oman Plast
Page 3: Oman Plast
Page 4: Oman Plast

HIS MAJESTY SULTAN QABOOS BIN SAID

Page 5: Oman Plast
Page 6: Oman Plast

SJS Group does not give any warranty towards the contents of the material appearing in the INTERNATIONAL PLASTICS & RUBBER INDUSTRY EXHIBITION & CONFERENCE Catalogue 2012, its accuracy, timeliness of fitness for any particular purpose. SJS Group disclaims all responsibility for any damages or losses in the use and dissemination of the information.

Designed By:

Page 7: Oman Plast

TECHNO PLASTIC INDUSTRY P.O. Box 158, P.C. 124 Rusail, Sultanate of Oman Tel : 00968-244 46290 / 244 46671 Fax : 00968-244 46690 Email : [email protected]

Page 8: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n8

FLOOR PLAN

Page 9: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 9

ABOUT THE ORGANIZER

Silver Star, established in 1992, is one of the leading organisers of large-scale exhibitions

and event management in Oman. Managed by a team of young and dedicated professionals,

the company has a favourable reputation of having organised more than twenty six highly

successful exhibitions (International, Domestic and Solo) in the Sultanate. These include INDEXPO

MUSCAT ’93 (an exclusive Indian Trade Fair), SPRING FAIR ’94, CONSUMEX ’95, SPRING FAIR ’95,

INDIAN JEWELLERY EXHIBITION ’95, CONSUMEX ’96, CONSUMEX ’97, SPRING FAIR ’97 INDEXPO

MUSCAT ’97 (an exclusive Indian Trade Fair), SPRING FAIR ’98, CONSUMEX ’98, SPRING FAIR ’99,

CONSUMEX ’99, SPRING FAIR 2000, CONSUMEX 2000, ARAB GOLD & JEWELLERY EXHIBITION

2001, Muscat, ARAB GOLD & JEWELLERY EXHIBITION 2001, SALALAH, Global Village at

Muscat Festival 2003, 3rd INDEXPO MUSCAT 2010 and 4th INDEXPO MUSCAT 2011 etc.

Above all, Silver Star is the first company to be appointed as Management Consultant to the Ministry

of Commerce and Industry, Government of Oman for its Mobile Exhibition of Omani Products which

has been inaugurated by His Majesty Sultan Qaboos Bin Said in Muscat and similar such exhibitions

organised in other Wilayats of Oman, viz. Salalah, Sur, Nizwa, Sohar, Buraimi and Khasab.

All the said exhibitions were of high standard and had been appreciated by one and all. The

company is looking forward in making Internationl Plastics and Rubber Industry Exhibition 2012 and

5th Indexpo 2012 yet another success story.

Page 10: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n10

CHIEF GUEST MESSAGE

On behalf of Public Establishment for Industrial Estates (PEIE), I would like to extend a warm welcome to all exhibitors and visitors to OMAN PLAST 2012, 1ST FIRST INTERNATIONAL PLASTICS AND RUBBER INDUSTRY EXHIBITION 2012. It is only fitting that the Sultanate of Oman, one of the biggest players in the petrochemical industry, is the host nation for an exhibition, which would become the region’s biggest exhibition for the plastics and rubber industry.

Over the last 40 years, under the visionary leadership of His Majesty Sultan Qaboos bin Said, the Sultanate of Oman has taken great strides in the development of the Omani industry. The growth rate achieved by Oman in the past few years has been quite encouraging. The Petrochemical industry being one of the main components of the Omani economy encouraging the downstream of polypropylene and PET, this event will give a great impetus to its further diversification and growth.

One of the fundamental goals of Oman’s Vision 2020 is the development of a private sector capable of optimum use of human and natural resources in an efficient and ecologically sound way. As per this vision, the industrial sector including the petrochemical, gas-based projects and plastics industries would play a vital role in trying to achieve Oman›s economic objectives.

With an impressive array of leading manufacturers and suppliers present this year, OMAN PLAST 2012 will offer a perfect gateway to reach this highly potential market and holds tremendous prospects of excellent business opportunities and new collaborations.

I take this opportunity to wish all exhibitors, delegates and visitors of the 1ST INTERNATIONAL PLASTICS AND RUBBER INDUSTRY EXHIBITION 2012 a grand success and look forward to welcoming everyone in our beautiful country, the land of warmth, hospitality and comfort.For Public Establishment for Industrial Estates (PEIE)

HILAL BIN HAMAH AL HASANICHIEF EXECUTIVE OFFICER

Page 11: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 11

MD’S MESSAGE

On behalf of the management and staff, it is my pleasure to welcome one and all to OMAN PLAST 2012, the 1ST INTERNATIONAL PLASTICS AND RUBBER INDUSTRY EXHIBITION 2012. I would like to express our gratitude to all our well wishers, sponsors, exhibitors, media partners and visitors whose strong support has been an influential motivation in making this event possible.

OMAN PLAST is perfectly timed for the continuing boom in Oman’s plastics and rubber industry. As the petrochemical industry is a major contributor to Oman’s growing economy this event will give a great emphasis to its further diversification and growth as well as highlighting the opportunities this region might offer. The event attracts key industry players and decision-makers from the corporate and public sectors in the region providing a strategic setting to forge business tie-ups and contacts.OMAN PLAST in its first edition will showcase the latest technology and machineries used in manufacturing of plastics and petrochemicals with participation of over ten countries. This event will be an excellent platform for exhibitors to publicize & display their products, innovation and services, build brand image and develop leadership in market position in the global areas. It will be an ideal stage for those who are interested to explore and acknowledge the most recent technologies and trends of the relevant market as well as exhibit a vast range of products and services related to analytical instrument.

I would like to take this opportunity to thank everyone for their support and valuable contribution towards the success of OMAN PLAST 2012. I wish all exhibitors and visitors a highly productive, interactive and successful event. We look forward to welcoming you again in our OMAN PLAST 2014.

P.D.NATHMANAGING DIRECTOR

Page 12: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n12

LIST OF EXHIBITORS - ALPHABETICAL

S.No. NAMe of THe exHIBITor CouNTry STALL NoS.

1 Al Felaij Trading & Contracting (Plastic Division) Muscat 401,402,501 & 502

2 Al Lamaan Trading L.L.C. UAE 939 & 940

3 Al Rahbi Plastics L.L.C. Muscat 203 &204

4 Al Safwah Plastic Material Trading L.L.C. Muscat 937

5 Bin Ahmed Enterprises Muscat 305

6 Dipped Products PLC Sri Lanka 941 & 942

7 Gulf Additives L.L.C. Muscat 701 & 702

8 Gulf Plastic Industries Co. S.A.O.G. Muscat 703 & 704

9 Jai Corp. Ltd. India 938

10 Kuwait Packing Materials Manufacturing Company KSA © Kuwait 405,406,505 & 506

11 Majan Plastic Industries L.L.C. Muscat 603 & 604

12 Muna Noor Plastic Industries L.L.C. Muscat 303 & 304

13 National Plastic Factory Muscat 403,404,503 & 504

14 Nexgen Fluoropolymers Pvt. Ltd. India 803 & 804

15 Nilkamal Limited India 902

16 Oman Plastic Industries L.L.C. Muscat 101

17 Organisation of Plastic Processors of India India 901

18 Plastindia Foundation India 801

19 Polyset Plastics Pvt. Ltd. India 901

20 Prayag Polytech Pvt. Ltd. India 601 & 602

21 Printex.Hamburg GmbH Germany 103 & 104

22 Raktherm UAE 903 & 904

23 Ringier Trade Media Ltd. Taiwan 201 & 202

24 SJS Group Oman Muscat 205 & 206

25 Smart Machineries and Moulds Pvt. Ltd. India 802

26 Society of Plastic Engineering USA (Middle East Section) USA 105 & 106

27 Time Technoplast Ltd. India 902

28 Union Officine Meccaniche SpA Italy 301 & 302

29 Union Quality Plastics Ltd. India 802

30 United Gulf Pipe Manufacturing Co. L.L.C. Muscat 605,606,705 & 706

31 United Plastic Manufacturing Co. L.L.C. Muscat 306

Page 13: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 13

LIST OF EXHIBITORS - BY STALL NUMBER

S.No. NAMe of THe exHIBITor CouNTry STALL NoS.

1 Oman Plastic Industries L.L.C. Muscat 101

2 Printex.Hamburg GmbH Germany 103 & 104

3 Society of Plastic Engineering USA (Middle East Section) USA 105 & 106

4 Ringier Trade Media Ltd. Taiwan 201 & 202

5 Al Rahbi Plastics L.L.C. Muscat 203 & 204

6 SJS Group Oman Muscat 205 & 206

7 Union Officine Meccaniche SpA Italy 301 & 302

8 Muna Noor Plastic Industries L.L.C. Muscat 303 & 304

9 Bin Ahmed Enterprises Muscat 305

10 United Plastic Manufacturing Co. L.L.C. Muscat 306

11 Al Felaij Trading & Contracting (Plastic Division) Muscat 401,402,501 & 502

12 National Plastic Factory Muscat 403,404,503 & 504

13 Kuwait Packing Materials Manufacturing Company KSA © Kuwait 405,406,505 & 506

14 Prayag Polytech Pvt. Ltd. India 601 & 602

15 Majan Plastic Industries L.L.C. Muscat 603 & 604

16 United Gulf Pipe Manufacturing Co. L.L.C. Muscat 605, 606,705 & 706

17 Gulf Additives L.L.C. Muscat 701 & 702

18 Gulf Plastic Industries Co. S.A.O.G. Muscat 703 & 704

19 Plastindia Foundation India 801

20 Smart Machineries and Moulds Pvt. Ltd. India 802

21 Union Quality Plastics Ltd. India 802

22 Nexgen Fluoropolymers Pvt. Ltd. India 803 & 804

23 Organisation of Plastic Processors of India India 901

24 Polyset Plastics Pvt. Ltd. India 901

25 Nilkamal Limited India 902

26 Time Technoplast Ltd. India 902

27 Raktherm UAE 903 & 904

28 Al Safwah Plastic Material Trading L.L.C. Muscat 937

29 Jai Corp. Ltd. India 938

30 Al Lamaan Trading L.L.C. UAE 939 & 940

31 Dipped Products PLC Sri Lanka 941 & 942

Page 14: Oman Plast
Page 15: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 15

AL feLAIj TrADINg & CoNTrACTINg (PLASTIC DIvISIoN)

Mr. Shahid BashirGeneral ManagerP.O.Box 2266, RuwiPostal Code 112Sultanate of OmanTel: 00968 24814481, 00968 24810532 Fax: 00968 24811352Mob: 00968 99467628Email: [email protected]: www.alfelaji.com

Stall Nos. 401, 402, 501 & 502

Products:• Leading Plastic Products manufacturers in the Sultanate of Oman since 1987.• Specializing in the production of high quality house hold & industrial plastic products.• Product range includes more than 500 types of plastic products.• Another sister concern with the name AL feLAIj BruSHeS INDuSTrIeS Co. started in

1987.• Manufacturing more than 10 brands of toothbrushes, Hair Brushes, Brooms, Banisters, Street

Brooms, Scrub Brushes.• Both the Plants are well equipped with latest manufacturing facilities. The strict quality control

measures and modern equipments make our products an excellent choice for all kind of end users.

• Exporting plastic & brushes products to all the GCC countries as well as to Pakistan, Iran, Sudan, Djibouti, South Africa, Libya, Yemen, Jordan, Ethiopia, Eriteria, Ghana, Kenya, Uganda, Ukraine, Tanzania & USA.

• With all the pooled resources Al Felaij aims to be one of the best names in the manufacturing industry.

AL-LAMAAN TrADINg L.L.C.

Mr. Mushtaq AhmedManaging PartnerP.O.Box 55548 DubaiU.A.ETel: 00971 4 2655116 Fax: 00971 4 2655271Mob: 00971 55 2446701Email: [email protected], [email protected]: www.allamaan.ae

Stall Nos. 939 & 940 Products: Leading distributor in Chemicals for Plastic Industry, Fiber Glass, Paint Factories & Gas Plants in extrusion machinery for Plastic Industry.

LIST OF PARTICIPANTS

Page 16: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n16

AL- rABHI PLASTICS L.L.C.

Mr. Sh. Ahmed Nasser H. Al RahbiManaging DirectorMr. Liaqat Ali Abid - Sales ManagerP.O.Box 1775 , Ruwi Postal Code 112 Sultanate of Oman Tel: 00968 25368555/666/777 Fax: 00968 25368367 Mob: 00968 99368368, 00968 99344403Email: [email protected] Nos. 203 & 204Products: We are the manufacturer of Polythene and Plastics Plain and Multi colors Printed bags. Vegetables bags, Other products are Laundry Bag, Each and every type of Garbage Bags, Garbage bags on Roll, Zipper Bag, Pharmacy bags, Packing Bags, LDPE shrink Wrapping sheet, Water Proofing, sheet, each and every type of caution tapes, Disposable dinner sheet, Vomiting bags with self sealing.

BIN AHMeD eNTerPrISeS

Mr. Azhar Al Hinai Deputy General Manager P.O. Box 2151, Ruwi Postal Code 112 Sultanate of Oman Tel: 00968 24453924 Fax: 00968 24453923 GSM: 00968 99000034Email: [email protected]: www.baeoman.com Stall Nos. 305Products: We are one of the leading manufacturer of plastic household products and thermowares in Oman. Our products are marketed under the brand names ‘BAE’,’Home needs’ and ‘Rehla’ and are well received in Oman market for their excellent quality and competitive price. Our products are exported to GCC, Africa, U.S.A, Europe and Far East. DIPPeD ProDuCTS PLC Mr. Damith DiasBusiness Development Manager 400 Deans Road, Colombo 10 Sri Lanka Tel: 0094 112683964 Fax: 0094 1126990185 Mob: 0094 777318450 Email: [email protected] Web: www.dplgroup.comStall Nos: 941 & 942Products: Incorporated in 1976, DPL is a fully integrated rubber glove manufacturer with facilities in Sri Lanka and Thailand. DPL portfolio of gloves cater to the needs of domestic, industrial and medical market segments spanning over 65 countries.

Page 17: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 17

guLf ADDITIveS L.L.C

Mr. Harpreet Shergill Head of OperationsRoad No.4C, Rusayl Industrial Estate Rusayl, Muscat Sultanate of Oman Tel: 00968 24449258, 00968 24449259 Fax: 00968 24449264 GSM: 00968 92248039 Email: [email protected] Web: www.otegroup.com/gulfadditivesStall Nos: 701 & 702Products: Gulf Additives LLC is OTE Group’s maiden venture into the manufacturing sector. It started trial production in early 2004. With its state-of-the-art technology Laboratory and production facilities and highly skilled staff it has become one of the leading Masterbatch producers in the region. The manufacturing facilities of Gulf Additives are located in the Rusayl Industrial Estate area of Rusayl in Sultanate of Oman. Gulf Additives manufactures Polyethylene based high quality Whites, Colours, Additives and Combination masterbatches covering nearly all aspects of plastic processing including film, Injection and Blow moulding applications. Gulf Additives masterbatches enhances the aesthetic value of the plastic product and make them look appealing and attractive. They are easy to use, non-dusting and can be incorporated in the end product very easily. Gulf Additives with its creative approach and innovative ideas in the plastic processing industry, it is committed to offer cost effective, knowledge based and customized solutions to various plastic processors in the Middle East Region. Gulf Additives seeks to develop mutually beneficial long-term relationships with its valued customers.

our Product range IncludesWhite Masterbatches, Colour Masterbatches, Additives MasterbatchesCombination Masterbatches, Black Masterbatches

guLf PLASTIC INDuSTrIeS Co. (SAog)

Mr. Asok KumarGeneral ManagerMr. K. Mahesh Kumar - Marketing ManagerRusayl Industrial EstateP.O.Box 55, RusaylPostal Code 124Sultanate of OmanTel: 00968 24446688/99 Fax: 00968 24446766GSM: 00968 95962963, 00968 99237915Email: [email protected] | [email protected] | [email protected]: www.gulfplasticoman.com | www.gulfplasticoman.comStall Nos. 703 & 704Products: Gulf Plastic Industries is one of the most advanced manufacturing industry in the Middle East engaged in the manufacture of Flexible Intermediate Bulk Containers (Jumbo Bags), Polypropylene woven sacks, Polypropylene webbing, Polyethylene liners and Polystyrene cups and bowls. Strategically located in Muscat – The Sultanate of Oman we cover the length & breadth of the globe within a short time period. This offers our customers the reassurance of guaranteed supply. We are committed to be a leader in innovation through the products we offer and the outstanding service we provide. To discover the service and the quality of our product contact us today of how we can help to make a difference in your business.

Page 18: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n18

jAI CorP LIMITeD (Masterbatches & fillers - unit) Mr. Anup K DebGM – Marketing11B & 12B Mittal Tower, 1st FloorB- Wing, Nariman Point Mumbai -400 021IndiaTel: 0091 22 6115 5300 Fax: 0091 22 2287 5197Mob: 0091 9967553482Email: [email protected]: www.jaicorpindia.com/masterbatchStall Nos. 938Products: JAI CORP was incorporated in 1985. We are one of the leading manufacturer of White, Black, Color, Additive Masterbatches and Filler. Apart from Masterbatches & Filler we are one of the large Indian polymer processer. As a group we process around 50,000 tons of polymers annually. Our other products are woven sacks, FIBC, geo-textiles, ropes, PP non-woven, HDPE film & Shopping Bags.

KuwAIT PACKINg MATerIALS MANufACTurINg CoMPANy KSA (C)

K-PAK- S-PAK- u-PAKMr. Saud A Al SerriDirector of Sales & MarketingP O Box 26522, Safat 13126South Subhan, Block No. 8Street No. 82, SubhanKuwaitTel: 00965 24721124,6,7 Ext: 220 Fax: 00965 24767060, 24710860Mob: K-Pak -00965 50000240, S-Pak-00966 (0)505334043, U-Pak-00971 (0)502231331Email: [email protected] : www.kuwaitpack.com

Stall Nos. 405, 406, 505 & 506

Products: K-Pak, S-Pak, U-Pak (The Group) is a leading manufacturer in disposable products for the food industry with an innovative and diversified product line strategically located with multiple facilities in the middle east region.

The Group provides high quality, innovative packaging solutions for the food industry, Retail, Catering, Supermarkets Hypermarkets, and fast food industries over the past 25 years. K-Pak has expanded its product lines to include the largest range of extruded polytrene disposable take away food plates, trays, and containers, clear plastic, tubs and foam cups.

K-Pak continues to expand to meet the Growing market demands and its four current locations in the region (Kuwait, Jeddah, Damman & Ras Al Kheimah) accommodate the needs of clients in more than 25 countries.

New Products to be introduced this year, new technology absorbent trays, PET, PP, HIPS.

Page 19: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 19

MAjAN PLASTIC INDuSTrIeS L.L.C.

Mr. M. Abdul Raheem Dy. General ManagerP.O. Box 183, Road # 14Rusayl Ind. AreaPostal code 124Sultanate of Oman Tel: 00968 24446315, 00968 24446513 Fax: 00968 24446586Mob: 00968 99660177Email: [email protected] Nos. 603 & 604Products: M/s. Majan Plastic Industries (MPI) is one of the leading plastic factory, manufacturer of complete range of polythene bags and shrink films. MPI is established in 1998 at the eastern region and later on transferred to Rusayl industrial area in 2003. MPI has all the latest technology machines, skilled operations working under supervision of experienced management. MPI uses only genuine and food grade material. MPI is expanding every year to serve its customers better and meet the market demand. MPI products quality is outstanding and has great fame in the market. Our technical team is always at your reach for presale and after sales services. We provide timely & dependable support by applying the most appropriate & right solutions upon market requirement. We deliver quality result on time, within budget, keeping cost per unit in to consideration. We produce all kind of Bio- degradable bags.

Manufacturer & Exporters of • All Kind of Printed & Plain Shopping Bags.• Carry Bags, Garbage, Nursery Bags, Laundry Bags & Rolls.• Car Seat Cover, Table Cover (Sufra).• Textile, Garments and Foodstuff Packing Bags.• Bags & Sheets for pillow & matress packing.• Polyethylene Tube & Sheet rolls for Furniture Packing.• Liner Bags for industrial packing.• Bags for Cement, Grout, Chemicals & Fertilizer’s.• LD Film for Lamination.• Shrink Film for Can/ Bottle Packing.• Industrial Shrink Film, Pallet Cover.• Construction Rolls, Warning Tapes & Caution Tapes.• Agricultural Mulch Film, UV Green House Films.

MuNA Noor PLASTIC INDuSTrIeS L.L.C.

Mr. Raj VarmaExport ManagerP.O.Box 1598, JibrooPostal Code 114Al GhoubraSultanate of OmanTel: 00968 24446620, 00968 24490483 Fax: 00968 24490486GSM: 00968 99245265Email: [email protected], [email protected]

Stall No. 303 & 304

Products: Ezeedrane- Polypropylene (PP) Double Wall Corrugated Sewer Pipe System and Plastic Manholes.

Page 20: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n20

NATIoNAL PLASTIC fACTory

Mr. A. K. Rajesh Babu C.E.OMr. Lakshminarayanan. RDGM – Business Development ManagerPO Box 371, Muttrah, MuscatPostal Code 114, Sultanate of OmanTel: 00968 24811689 Fax: 00968 24810078GSM: 00968 99352297, 00968 92880618Email: [email protected]: www.nationalplasticoman.comStall Nos. 403, 404, 503 & 504 National Plastic factory an ISo 9001:14001: oHSAS 18001 certified company & A Member of Al-Hosni group International located in Sultanate of Oman founded in 1975 is the leading manufacturers of Plastic Packaging Products & Industrial and Household plastic products & uPVC Electrical Conduit, Trunking, Flexible Corrugated, High Pressure Pipes, Drainage, Sewerage Pipes, Fittings & Accessories. Also GI Conduits, boxes, GI Trunking, Cable Trays, Fittings & Accessories, IP Enclosure Boxes, PPR Pipes, Fittings manufactured as per BSI Standards. The manufacturing plant is located in oMAN, uAe(fujAIrAH) & egyPT.

our Product ranges:

a) Plastic Packaging Products Such as , Plastic Jerry Cans, Plastic Bottles and Containers, Aerosol Caps and Closures, Water Heater Plastic Parts, Integrated Manufacturing as per clients requirement.

b) electrical Products – “HoTACe” brand Heavy Gauge uPVC Electrical Conduit, , Fittings and Accessories in 19mm , 20mm to 50mm Sizes as per British Standard BS4607 / BSEN50086/ BSEN-61386-21 & Gulf Standard GS 33/1984 , Omani Standard OS-109/1986.

c) uPvC Trunking : 16x16 , 25x16, 35x25, 50x50, 75x50, 75x75 & 100x100 (mm) sizes.

d) PPr Pipes and fittings in 20,25,32,50,75, &110 (mm) sizes for HOT and COLD Water Application.

e) uPvC Pressure Pipe and fittings for water , sewerage and Sanitary Application in ½” to 6” inches in C , D , E classes as per British Standard 3505 /1986.

f) uPvC Soil and ventilation pipes, uPvC Drainage & Sewerage pipes and fittings as per BS 4660 & BS 5481, BSeN – 1404 – 1 from 3” to 8” Sizes.

g) g.I Conduits in 20mm to 100 (mm) sizes & g. I Conduit fittings and Accessories in 20mm

to 50mm Sizes , gI Cable Trays , Mini and Maxi Trunking

The Company Strength : exPerIeNCe TeCHNoLogy QuALITy

Page 21: Oman Plast

FOOD & DAIRYPRODUCTS

DISINFECTANTPRODUCTS

ALL KINDS OF uPVC PIPES & PPR PIPES

AEROSOLPRODUCTSPERSONAL CARE

PRODUCTS

CAPS & CLOSURE

OIL LUBRICANTS & PAINTPRODUCTS

HOUSEHOLDCHEMICAL & DETERGENTPRODUCTS

PET BOTTLE PRODUCTS

*Alternative Length, Thickness & Colour will be available for all uPVC Pipes as per Customer requirement.

All above uPVC Pipe & Fittings product manufactured as per British Standards

A Division of Al-Hosni Group International

MANUFACTURED BY:

, GSM: +201 68807818+971 50 4333176 / +971 55 4784726

+968 92880618 / 99840233

An ISO 9001, 14001 & OHSAS 18001Certified Company

Page 22: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n22

NexgeN fLuoroPoLyMerS PvT. LTD.

Mr. Rajat JunejaExecutive – International Marketing2nd Floor, Pavitra House4 & 5 Shahzada Bagh Extn.Delhi – 110035IndiaTel: 0091 11 23652312, 0091 11 23652313 Fax: 0091 11 23647117Mob: 0091 9560544338 Email: [email protected]: www.nexgenfluoro.comStall Nos. 803 & 804Products: Nexgen Fluoropolymers Pvt. Ltd. is engaged in manufacturing of wide range of PTFE/FEP/PFA products. The Company has been promoted by a team of engineering and management professionals having an experience of more than a decade in the field of Fluoropolymers.Our product range includes Rods, Sheets, Pipes, Gaskets, Braided Packings, Skived Sheets, Films, Thin Walled Tubing, Envelope Gaskets, Bellows, Piston Rings, Laboratory Wares, Thread Seal Tapes, ePTFE Tapes, ePTFE Sheets and other customized products based on customer’s requirements. Our products are designed and developed by using state of art processing machinery. Committed towards total customer satisfaction, we dispatch our products only after passing them through stringent tests and proper trials. Through our high performing products, we have set standards for performance and reliability across the domestic and international markets.

NILKAMAL LIMITeD

Mr. Sharad ParekhManaging DirectorNilkamal House, Plot No. 77/78Road No.13/14, MIDCAndheri (E)Mumbai – 400 093IndiaTel: 0091 22 26818888, 0091 22 28361366 Fax: 0091 22 28367891Mob: 0091 9820061366Email: [email protected], [email protected], [email protected] Nos. 902Products/Services : We are manufacturing – Chairs, Tables, Dining Tables, StorageDevice, Crates, Dustbins, Premium Chairs etc.

22

Page 23: Oman Plast

PTFE SEMI FINISHED PRODUCTS PTFE STANDARD PRODUCTS

PTFE MACHINED PRODUCTS PTFE LINED PIPE & FITTINGS

One Stop Solution For Fluorobased Products....

Surpassing Corrosion Barriers

Page 24: Oman Plast
Page 25: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 25

oMAN PLASTIC INDuSTrIeS L.L.C.

Mr. P. Y. KotianGeneral ManagerMr. Sunil MathewSales ExecutiveP. O. Box 2993, RuwiPostal Code 112Sultanate of OmanTel: 00968 24591765, 00968 24593502 Fax: 00968-24592745GSM: 00968 99313749, 00968 99354837Email: [email protected]: http://207.191.228.38/omplast/Stall Nos. 101Products: 1] Printed & Plain shopping bags with and without d2w oxo-biodegradable. 2] Packing/Bakery/Garbage bags. 3] Shrink Film, Civil Film and lamination film. 4] Disposable Plastic cups and containers. 5] EPS Foam Cups. 6] BOPP Self Adhesive Tapes.

orgANIzATIoN of PLASTICS ProCeSSorS of INDIA

Mr. Deepak Lawale Secretary General 404/5, Golden ChambersNew Link Road, Andheri (West)Mumbai 400 053India Tel: 0091 22 66923131, 0091 22 6692 3132 Fax: 0091 22 2673 6736Mob: 0091 9322591715 E-mail: [email protected]: www.oppindia.org Stall Nos. 901Products/Services: National Apex Association of Plastics Processors. OPPI formed in 1984 is involved in evolving policies with the government for growth of Indian Plastics Industry. OPPI has entered into MOU with all leading plastic associations in the world.

25

Page 26: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n26

PLAST INDIA fouNDATIoN

Ms. Mamta Oza Marketing Manager – Exhibitions401-B, LandmarkOpp. Cinemagic209 A, Suren RoadOff Andheri Kurla Road Andheri EastMumbai – 400093IndiaTel: 0091 22 26832911 Fax: 0091 22 26845861Mob: 0091 9833652920E-mail: [email protected]: www.plastindia.orgStall Nos. 801Products/Services: Plast India Foundation is the apex body of major associations, organizations and institutions connected with plastics, with common objectives to promote the development of plastic industry and to assist the growth of plastics and related materials and their products. The Foundation is dedicated to the national progress through plastics.

PoLySeT PLASTICS PvT. LTD.

Mr. Bhupesh BafnaManaging Director11/A, Mehta Indl. EstateI.B. Patel RoadOpp. Bhavi Darshan Bldg.Goregaon (E) Mumbai – 400 063IndiaTel: 0091 22 26866233, 0091 22 32960841 Fax: 0091 22 26866235Mob: 0091 9821223331E-mail: [email protected] No. 901Products/Services : Injection moulded plastics products for Housewares, Garden Furniture and Industrial Segments.

26

Page 27: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 2727

PrAyAg PoLyTeCH PvT LTD.

Mr. Nikhil AggarwalVP marketing C-587, Ind. Area, Phase-1Bhiwadi, District –AlwarRajasthan- 301019IndiaTel: 0091 1493 224482 Fax: 0091 1493 224483 Mob: 0091 9910026724 Email: [email protected] Web: www.prayagmb.comStall Nos. 601 & 602Products: Prayag Polytech is the largest manufacturer and exporter of masterbatches from India with exports to over 50 countries. We have a complete range of masterbatches in white, Black, additive and Colour Masterbatches. All our products are produced on imported start of the machinery using Twin Screw extruders. Business is done largely through distributors in every country. We are actively seeking an agent cum distributor in Oman market.

PrINTex HAMBurg gMBH

Mr. Heinz HaensdiekeChief Executive OfficerHuetten 5920355 HamburgGermanyTel: 0049 171 5075759 Fax: 0049 5246 8425Email: [email protected], [email protected] Nos. 103 & 104Products: Printex is involved in supplying second hand overhauled machines for the thermoforming industry - like sheet extrusion lines, thermoformers, offset cup printers and auxiliaries. Printex is arranging joint venture agreements with German/European cooperation partners in the plastic field. Several serious German factories are looking for a local partner in different fields.

rAKTHerM

Engr. Mohamed HabibMarketing ManagerRas AlKimahP.O.Box 30739U.A.ETel: 00971 7 2447128 - Ext(117) Fax: 00971 7 2447129Mob: 00971556725565, 00971507102976E-mail: [email protected]: www.raktherm.comwww.tahweel.comStall Nos. 903 & 904

Page 28: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n28

rINgIer TrADe MeDIA LTD

Mr. Mike HayPresident9/F., Cheong Sun Tower, 118 Wing Lok Street, Sheung Wan, Hong KongTel: 00852 2369 8788 Fax: 00852 2869 5919Mob: 00852 90968895Email: [email protected]: http://www.industrysourcing.com/Page/Index.aspxStall Nos. 201 & 202Products/Services: Proven Media for the Middle east and Africa, China and AsiaRingier Trade Media Ltd. is a leading B2B information provider for industry leaders in the Middle East and Africa, China, and the Asia Region. The company provides technical information, solutions and applications that manufacturers can use to improve their manufacturing and marketing capability. Ringier’s multi-media platform -which includes 35 industry trade journals, an online marketplace (www.industrysourcing.com), conferences and events, PR & marketing tools, and mobile apps for iPad/iPhone and Android smart phones, delivers content to manufacturing communities worldwide. The company has been successfully linking buyers and suppliers in China, Asia, the Middle East, Africa and the rest of the world to the mutual benefits of all parties.To download our “Industry Sourcing” mobile apps visit www.industrysourcing.com/apps

SjS grouP (oMAN)

Mr. Naveed SharifSr. Business Development ManagerP.O.Box 2058, RuwiPostal Code 112, Sultanate of OmanTel: 00968 24789680 Fax: 00968 24751019GSM: 00968 95223963Email: [email protected]: www.sjsoman.comStall Nos. 205 & 206

SMArT MACHINerIeS AND MouLDS PvT. LTD.

Mr. Shreeram RaneDirectorC-311 Orchid Premises SocietyTwin Arcade C , Military Road Marol Andheri (East)Mumbai – 400059IndiaTel: 0091 22 29200407 Fax: 0091 22 29200408Mob: 0091 9819327369Email: [email protected] Nos. 802Products/Services: Manufacturers and Exporters of Extrusion Blow Moulding Machines and Moulds, Importers and Exporters of Used/New Injection Molding Machines, Moulds, Auxiliary Equipments like Dryers, Dehumidifiers, Loaders, Conveyers, Chillers, Hot Runner Temperature Controllers etc., Merchant Exporters, Turnkey Projects.

Our expertise lies in creative & professional work and we aspire to undertake turnkey projects irrespective of our client’s budget - in short we help build brands. SJS Group is predominantly an Omani based company with its core activities listed under divisions such as Advertising, Publishing, E-Solutions, Interiors, Events, Market-Research, Software, Hospitality & Trading.

Page 29: Oman Plast
Page 30: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n30

SoCIeTy of PLASTIC eNgINeerS MIDDLe eAST

Dr. Raed Al-ZubiPresident Vice PresidentSociety of Plastic Engineers, U.S.A.DubaiU.A.EMob: 00971 507501765 Email: [email protected] Nos. 105 & 106

TIMe TeCHNoPLAST LTD.

Mr. Pashupatinath Tewari Senior Manager - Business Development (Infrastructure Business) 2nd Floor, C Wing, Tex Center Off. Saki Vihar Road, ChandivaliAndheri (East)Mumbai - 400072 India Tel: 0091 22 7111 5844 Fax: 0091 22 2857 5672 Mob: 0091 9773030316 Email: [email protected] Stall Nos. 902

uNIoN offICINe MeCCANICHe S.P.A.

Mr. Alberto ColnagoVia 1 Maggio 12/1420028 S.Vittore Olona (Mi)ItalyTel: 0039 0331 519300 Fax: 0039 0331 518370Mob: 0039 334 6182370Email: [email protected] Web: www.unionextrusion.it Stall Nos. 301 & 302Products: UNION was founded in 1950 and produce extrusion lines for sheets, hollow sheets, cast film, composite panel of plastics and metal, compounding and recycling materials. Advance equipment for XPS, XPE, XPET foam boards, sheets, profiles and pipes.The advantages in purchasing UNION lines are considerable and can be summarized as follows:1) Low costs related to quality of the product.2) Reliability and productivity.3) Reduced cost for maintenance. 4) Energetic saving.Besides this, we have an after sale service which is composed by engineers highly skilled in planning and managing the machinery we manufacture.

Page 31: Oman Plast

T H E J O U R N E Y !

Page 32: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n32

uNIoN QuALITy PLASTICS LTD.

Mr. Zuzar A. KathawalaManaging Director5th Floor, A.G.H. Chambers379/381, Narsi Natha StreetMumbai – 400 009IndiaTel: 0091 22 23449885/86, 0091 22 42317861 Fax: 0091 22 23401643Mob: 0091 9820035785Email: [email protected], [email protected] Nos. 802

uNITeD guLf PIPe MANufACTurINg Co. L.L.C.

Mr. Eng. Mohammed Al Hashani Managing DirectorMr. G. SitaramanFactory ManagerPlot # 234, Road 20, Rusayl Industrial EstateP. O. Box 419, Al KhodhPostal Code 132Sultanate of OmanTel: 00968 24447056 Fax: 00968 24447055GSM: 00968 95328727Email: [email protected]: www.ugpm.netStall Nos. 605, 606, 705 &706Products: Equipped with cutting edge German technology, UGPM is a leading manufacturer and supplier of HDPE pipes (pressure & gravity), manholes, house connections, Outfall pipelines and other fabricated items for the water supply and drainage industries in the Sultanate of Oman.

Utilizing unique and innovative manufacturing technologies from Krah, Germany, it produces high quality plastic products serving primarily applications in water and drainage industries. The company works hand in hand with the three C’s (Client, Consultant and Contractor) utilizing complex calculation techniques to arrive at a customized product that meets specific requirements. Products developed are highly cost effective, with long life, meeting environment concerns, keeping delivery schedules in mind, low maintenance costs, homogenous products using specialized welding techniques for secure jointing, for quick and easy installations without additional training or expensive equipment.

Given the nature of the products, the applications and the stringent requirements from the 3 C’s, the company places maximum emphasis on the quality department and has achieved 9001, 14001 and 18001 certifications. In addition, the company provides technical training for its products from reputed worldwide companies, thus emphasizing the importance it places on its long term relationships with the 3 C’s.

Page 33: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 33

uNITeD PLASTIC MANufACTurINg Co. L.L.C.

Mr. Rakesh Kumar DharSales ManagerP.O.Box: 2151, Ruwi Postal Code 112 Sultanate of OmanTel: 00968 24451779 Fax: 00968 24451774GSM: 00968 95724961Email: [email protected]

Stall Nos. 306

Products: We have the pleasure to introduce ourselves as “united Plastic Manufacturing Company” an ISO 9001:2000 certified company, was started in the Year 2005 in Muscat, Sultanate of Oman.

The Company manufacturers “PPr Pipes & fittings Plumbing Systems” at its full-fledged production facility at Mabeela, Saniya Industrial Area, & is marketed by brand name “uPTHerM”.

uPTHerM PPr Piping systems are being successfully used in the installation of water piping system for all kind of water supply system. Our strong huge and satisfied customer base spread across the length and breadth of Oman and also catering to export market (GCC) & is Made in Oman.

UPTHERMPPRpipes&fittings are produced as per DIN 8077 and DIN 8078 & the fittings are produced as per DIN 16962 standards.

All the pipe and fittings range are tested & approved and certified by various testing agencies like “wrAS”-water regulations & Advisory scheme, Hygience-Institut des rughgebiets-germany, SKz-germany, etc.

“uPTHerM” PPr piping system is designed for use in Hot and Cold water distribution system and & has a proven track record of being used in millions of houses, apartments, hotels, condominiums and offices for more than 5 years.

We have nationwide marketing network. Our customer friendly and innovative approach makes “uPTHerM” pipes and fittings a perfect combination of “Durability, reliability, Safety and Cost saving”.

AL SAfwAH PLASTIC MATerIAL TrADINg L.L.C.

Mahmood Jamil BaigManaging DirectorP.O.Box 1798, MuscatPostal Code 114Sultanate of OmanTel: 00968 24615342 Fax: 00968 24706049GSM: 00968 92386371, 00971 50 4315787, 00971 55 5601997Email: [email protected], [email protected], [email protected] Stall Nos. 937

Products : Exclusive agent for BERICAP, Koksan PET Preform-Turkey – ECOLAB FZE USA Manfc. of PET Bottles & Plastic Machines with CE Mark.

Page 34: Oman Plast
Page 35: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 35

K-PAK, was incorporated in 1986 in the State of Kuwait as an Extruded Polystyrene Foam Disposable Product Manufacturer for the food industry. In 2000, the company set its sight on the fledgling Saudi market for further expansion and growth, and opened its first Saudi production facility in Dammam, S-PAK. As a certificate to K-PAK’s commitment to service and as a response to increasing demand from the Levant region and the European market, the third production facility was built in Jeddah, in 2003. Realizing its clients’ needs for optimal logistics and as continued strategy to be closer to its market, the company hence started its fourth production facility in 2007 in Ras Al Khaimah U-PAK in UAE.

The K-PAK Commitment to Quality ad Food Safety Today with over 200 employees, 8 extruders, 29 thermo formers, K-PAK is the largest manufacturer by sales and capacity in the Middle East and North Africa region. The Company offers the largest range of extruded polystyrene disposable take-away food plates, trays, containers, clear plastic containers and foam cups and tubs. The company also offers high quality offset and sheet printing on boxes, trays and cups products for extended brand visibility for its clients. As a commitment to its users, only the highest of food grade material are used at K-PAK group.

K-PAK group leads the industry with state of the art machinery, innovation, the widest range of product, quality and reliability. The Company is also keen on hygiene and food safety and its products are regularly tested by independent laboratories. K-PAK is the only disposable food packaging manufacturer in the region certified to export to the European Union under EU commission directive 2002/72/EU.

K-PAK’s InnovationThe Company’s star product, K-STAR, superior absorbent meat trays for the fresh meat industry, are the best example for the Company’s dedication to innovation.

K-PAK, reach and ServiceToday K-PAK products are available from Indian subcontinent to European Markets; the Company exports to more than 25 countries.

fast Delivery, Distribution NetworkThroughout the Middle East, North Africa, and the UK we have established an excellent sales network through trusted and experienced resellers covering their respective countries. In areas where we operate we have direct presence through our customer service teams to achieve our customer’s satisfaction. To support this network and to achieve quicker response times to our clients, we have built warehouses in various cities, and an excellent logistics back bone, with a fleet of 30 vehicles in the region.

K-PAK group appreciates the contribution of each of our employees, clients, distributors and suppliers who have made to our success.

www.kuwaitpack.com

KuwAIT PACKINg MATerIALS MANufACTurINg CoMPANy KSC ( C ), K-PAK, S-PAK, u-PAK THe grouP.

Page 36: Oman Plast
Page 37: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 37

BIN AHMeD eNTerPrISeS

 

 

 

Contact Person : Mr. Azhar Hamoud Al-Hinai - general Manageremail: [email protected] gSM: +968-99000034

uNITeD PLASTIC MANufACTurINg CoMPANy L.L.C. A part of The “Bin Ameir Group” started producing Polypropyelene Pipes & Fittings Products for Hot & Cold Water application and are sold under the brand name “UPTHERM” in Muscat as well catering to Export market in Gulf region since last 6 years, United Plastic manufacturing Company specializes in manufacturing of PPR Piping Systems the wide range of applications.

UPTHERM PPR Plumbing System is a versatile and comprehensive system for hot and cold water piping in any modern residential, commercial and industrial buildings.UPTHERM PPR Piping Systems are used in:• Potable Water supply installation inside residential complexes, independent houses, hotels, hospitals and chemical laboratory etc.• Industrial water transmission application that required to transport hot or cold water at pressure.• Under-floor heating, boiling and radiator connections or wall cooling and heating systems.• Swimming pools and their water filtration system• Piping network various fields like Agriculture, Chemical transferring in the industries etc.We have nationwide marketing network. Our customer friendly and innovative approach makes “UPTHERM” pipes and fittings a perfect combination of “Durability, Reliability, Safety and Cost saving”.

What makes “UPTHERM PPR PLUMBING SYSTEM” different from other Piping systems available in market is, availability of wide range of sizes in pipe as well as fittings, approvals from prestigious testing laboratories for “Hygiene”, Excellent thermal conductivity”, “Smooth bore flow”, “Monitoring of highest international Quality standards” and “Guarantee of 50 years of product life” & above all our prestigious clientele base from whom we are getting continuous repeat orders & its our constant endeavor towards highest level of customer satisfaction, and an urge to give better product.

BIN AHMeD eNTerPrISeS was Founded by industrialist Mr. Hamoud Ahmed Bin Ameir. The Company is managed by well experienced professional in the field from the beginning. The company begin With a small production facility to produce pens. Later it diversified into plastic industrial & household Products. Today Bin Ahmed Enterprises is well known as Manufacturer and supplier of Plastic household products in the Middle East. Our product range includes Variety plastic household Products like Microwave containers, Kitchen storage containers; Thermoware like

hot pots, dustbins, Cloth hanger’s etc. Company can also produce any injection moulded product as per the customer’s requirement.

The Company is especially known for Manufacturing of Microwave containers and products in the Private Labels for Customers in the Middle

East, Europe, & U.S.A.

In the year 2004 the company added another product to its ever growing range by introducing Thermoware under the brand ‘Rehla’. Now it is one of the well

known Hotpots supplier in the Middle East. The products are received very well in the market for the quality and price. The company has state of art facilities to produce all injection

molded products and also keeps upgrading the machines. Our aim is to produce high quality products at affordable prices and keep the customers satisfied all the time.

Page 38: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n38

OMAN A BIG PLAYER IN THE

The Sultanate of Oman is situated at the South East corner of the Arabian Peninsula and is spread over a vast area of 309,500 Sq.k.m. of mountainous terrains and plains sprinkled with dry riverbeds (wadis) with occasional green valleys. The neighbouring countries of the Sultanate of Oman are the U.A.E and Yemen. Besides being a country of beautiful beaches, unique fountains and deserts, Sultanate of Oman is strategically located on the crossroads to other GCC Countries. Muscat is the capital of the country and Salalah, Sohar, Buraimi, Sur, Nizwa and Rustaq are some of the prominent business centers in Oman. Under the able guidance and benevolence of His Majesty Sultan Qaboos bin Said, the country›s economic graph has soared to unprecedented heights. With over 2.7 million population and excellent infrastructure, two modern airports and 12,000 Sq.m. centrally air conditioned exhibition centre at Muscat, matching with international standards, Oman invites businessmen, traders, industrialists and companies of India to broaden their trade and business horizons.

Oman also has one of the fast growing economies in the world today. A country that remained sheltered till the late 60’s, Oman caught the Arab nation by storm by its dynamic progress. The growth rate achieved by Oman in the past few years has been quite encouraging.Owing to increasing demand for quality products, Oman has been importing from more than 100 countries around the world. Total imports recorded in 2010 valued at U.S. $ 19.70 billion and total exports at U.S. $ 36.46 billion. Besides, Oman has a flourishing re-export market to Iran, U.A.E. and Yemen. Customs duty ordinary payable is only 5% on general products. The exchange rate of Riyal Omani is 0.386 per U.S. $. In a very short time, the country has made rapid economic progress with GDP touching a high of U.S. $ 57.62 billion in 2010. The trends spell advancement, growth, industrialization and diversification.International Plastics and Rubber Industry Exhibition offers a perfect gateway to reach this highly potential market and holds tremendous prospects of excellent business opportunities and new collaborations.

Oman is considered to be one of the biggest players in the petrochemical industry in the region, with a global reach spanning 150 countries. The Sultanate’s chemicals and plastics capacity will increase by 60 percent to reach 8.5 million tons in 2012, official sources cite. Noteworthy gains In fact, the plastics industry per se has seen sustained growth levels in the region as Middle East and African markets are expected to deliver noteworthy gains right upto 2014. An annual growth rate of around 30 percent has been projected. This region is emerging as a leading global plastic production resin hub with capacities expected to double in the coming years.The polyethylene production capacities in the Gulf region will increase from 10.7 million ton in

Page 39: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 39

PETROCHEMICALS INDUSTRY

2009 to 21.5 million tons by the year 2015, an increase of slightly over 100 percent. Likewise, the production capacities of polypropylene will increase from 4.8 million ton in 2009 to 9.5 million by year 2015, an increase of 98%.

Largest source The Middle East remains the largest source of plastic raw materials; upto 16 per cent of the region’s abundant petroleum supply that is not used for energy production is converted into other materials such as plastic products. While sustaining growth in the plastic industry is of prime importance, Oman has made sure it maintains a green outlook. The world produces and uses 20 times more plastic today than it did 50 years ago. Ordinary plastics can take up to 400 years to break down. Given plastic is a fundamental part of our day-to-day lives, Oman also made sure that it has earth-friendly product like degradable plastic

Oman has judiciously sought to move away from its dependence on the oil and gas sector to

manufacturing and knowledge-based industries. In this context it has created the Sohar industrial area for a multitude of oil and gas based projects. One of the fundamental goals of the Oman Economic Vision 2020 is the development of a private sector capable of optimum use of human and natural resources in an efficient and ecologically sound ways. As per this vision the industrial sector including the petrochemical, gas-based and plastics industries would play a vital role in trying to achieve Oman›s future economic objectives.

Page 40: Oman Plast

2014FEBRUARY 2014*

* Dates to be annonced shortly

Page 41: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n 41

Techno Plastic Industry has been providing the Omani and international markets with world class polypropylene random copolymer (PP-R Type 3, PN25) pipe systems for over a decade. Techno Pipe Systems are locally made with the highest quality raw materials (following strict German Standardization measures) and are able to serve many industries and applications such as hot and cold water systems, heating and cooling systems, swimming pools, water treatment plants, chemical production lines, food and beverage industries, medical and laboratory industries, compressed air distribution plants and irrigation systems. By focusing on superior product quality and innovation, encouraging the development of Omani employees, respecting the environment, continuously exploring the most mutually beneficial business partnerships with clients and international dealers and providing a ten-year satisfaction guaranteed warranty Techno Plastic Industry has reached and maintained an unprecedented level of success and reputation for integrity and unrelenting quality.

Techno Plastic Industry operates under the motto “Our Strength is Our Quality”. This applies to products, professional workmanship, raw materials, and facilities. With full recognition that it is innovation that distinguishes a leader from a follower, Techno has always endeavoured to increase value through advanced solutions for clients such as introducing the Coprax and Techpex product lines to further market reach and add to their range of high quality pipe and fitting solutions.

Techno Plastic Industry LLC, a member of the Building Technology Group was founded in 1998 on the basis of being a leading provider of world-class pipe system solutions. With a unique combination of experience, industry knowledge, global partnerships and expedited delivery capabilities Techno Plastic Industry has always been able to meet clients’ expectations and need for increased reliability, better quality, and faster service.

As part of the Building Technology Group, our ultimate mission is to be the best provider of the highest quality pipe systems in the Sultanate of Oman and in our international markets. Our vision of unrelenting quality and prosperous growth can only be realized when our clients are fully satisfied, our employees are given the opportunity to succeed and our shareholders are reaping the fruits of their trust in us.

Sheikh Saeed Saleem Khawwar Chairman

2014FEBRUARY 2014*

* Dates to be annonced shortly

Page 42: Oman Plast

I n t e r n at I o n a l P l a s t I c s & r u b b e r I n d u s t r y e X H I b I t I o n42

UGPM is in a unique position to offer high quality products targeting the mega infrastructure projects being implemented in the nation. The company employs current, innovative and proven technologies, employed in other parts of the world, in its manufacturing units in the Sultanate.

Since its inception in late 2009, the company has worked hard to establish itself as a reputable supplier in the midst of existing players in the domestic market. With emphasis on quality and customer service, the company has quickly evolved into a leading and recognized supplier of its products in the country. It is supported in its endeavors by a range of reputed international suppliers, who are experts in their respective fields of operation. The company is involved with major infrastructure projects in the Sultanate and works with some of the largest contractors and construction companies. Working hand in hand with the client, the consultants and the contractors, UGPM utilizes complex calculation techniques to arrive at a customized product that meets specific requirements. Products developed are highly cost effective, with long life, meeting environmental concerns, keeping delivery schedules in mind, low maintenance costs, homogenous products using specialized welding techniques for secure jointing, enabling quick & easy installation without additional training or expensive equipment.

The company aims to build on its existing base as a recognized supplier of HDPE products. With its current focus on the domestic market, the company also has its eye on other projects within the GCC region. It has a vision of becoming a leading manufacturer and supplier of HDPE products in the region. The ownership structure of the company includes key institutional investors and high net-worth individuals from Oman and the region. The company is led by Eng Mohammed Al Hashani, who has relevant technical and commercial operating experience including stints in the manufacturing units of the technology suppliers in Europe, making high profile presentations marketing HDPE related manufacturing technologies to key decision makers within the GCC region among others.

It has a diversified employee base, which is a major strength. In order to hone employee skills, the company offers extensive and comprehensive training programs to all its employees and extends the same facility to its clients as well. The technologies utilized within the company are highly specialized and require certain competence. UGPM is certified to offer these training programs. In addition, the company offers its panel of reputed and leading international technical experts where required. Apart from such programs, last year, the company has hosted an international conference bringing experts and industry decision makers under one roof. UGPM recognizes the significance of quality to its operations and has obtained ISO 9001, 14001, 18001 certifications.

Equipped with cutting edge German technology, UGPM is a leading manufacturer and supplier of HDPE pipes (pressure & gravity), manholes,

house connections, Outfall pipelines and other fabricated items for the water supply and drainage industries in the Sultanate of Oman.

Eng. Mohammed Al Hashani Managing Director

Page 43: Oman Plast
Page 44: Oman Plast

Recommended