OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 1/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
OMNISTAR
FEATURES
Real alternative to HID luminaires for high-power applications
Cost-effective and efficiency to maximise energy and maintenance savings
Flexibility: modular approach for high-power applications
LensoFlex®2 or collimators offering high performance photometry, comfort and safety Reflectors with thermal sensor included on the PCBA for long lasting performance On-site photometric adjustment Surge protection 10kV (optional)
Designed to incorporate Owlet range of control solutions: autonomous network and interoperable network
TYPES OF APPLICATION
Tunnels Sports lighting Large areas
Roundabouts Industrial halls Car parks
Roads and highways Monuments and façades
LIGHTING SOLUTION BASED ON MODULES
To satisfy field requirements in terms of light distribution and the mounting system footprint, the OMNISTAR is a modular solution.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 2/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
DIMENSION DRAWING
DIMENSIONS AND CHARACTERISTICS
OMNIOB (OMNISTAR) Length (mm) 530 Width (mm) 532 Height (mm) 80 Weight (kg)** 16 Tightness level* IP 65, IP 66 Impact resistance* IK 08 Electrical class* Class I EU, Class II EU Aerodynamic resistance (CxS) 0.260m²
* According to IEC-EN60598 and IEC-EN62262 ** Average weight. The max weight is +/- 10% more but for the exact weight according to the configuration, please contact us.
SUMMARY
CONCEPT The OMNIstar has been designed to provide an unrivalled combination of performance and flexibility for lighting areas where high lumen packages are needed (from 30 to 120.000lm) while offering maximum energy savings. The modular concept of optical units which enables 1, 2 or 3 modules to be grouped on the same bracket and the performing LensoFlex®2, Collimators and/or Reflectors LED engines means that the OMNIstar luminaire provides a wide range of lighting distributions and lumen packages to meet the specifications of the area to be lit. On-site adjustment guarantees the perfect lighting. Recommended installation height: between 8 and 30m HOUSING & FINISH • Housing in high-pressure, die-cast aluminium, polyester powder coated • Protector: thermally hardened glass • Screws in stainless steel • Colour: AKZO 900 grey sanded • Tightness - optical: IP 66
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 3/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
• Tightness - driver: IP 20/IP 65 • Impact resistance: IK 08 INSTALLATION • Standard “U” bracket for direct fixation (2 x M12, 4 x M8 or 1 x M20) • On-site adjustment • Adapted bracket for Duo (2 optical blocks) and Trio (3 optical blocks) versions • Additional accessories for mounting: o vertical mast or tube with collards for poles with a diameter of 60 and 76mm o direct post-top mounting for a diameter up to 60mm (for single version) o side-entry for a diameter of up to 60mm (for single and duo version) • Delivered pre-wired for easy installation (with quick connector in option) • Remote driver box for outdoor and indoor versions • Easy plug-in of the separate driver box and LED optic module with quick connectors enables the OMNIstar to take advantage of future technological evolutions and facilitates maintenance operations OPTICAL UNIT • “FutureProof” optical unit, replaceable on-site, enclosed in the housing with a removable gasket - Shore50 • Protected against lens degradation by 5mm thick extra clear hardened glass • Flatbed PCB with acrylic lens overlay principle • Various photometric distributions: from motorway to large areas • CRI > 70 • ULOR: 0% LED lumen depreciation • Lifetime residual flux @ Tq=25°C @ 100.000 hrs: 350mA & 500mA: 90%; 700mA: 80% ELECTRICAL • Class I or Class II • Input voltage: 120-277V - 50-60Hz • Power factor > 90% at full load • 10kV surge protection • Automatic power-off at opening STANDARDS & CERTIFICATIONS • CE • ENEC • LM79-80 • ETL • ROHS • All measurements in ISO17025 accredited laboratory OPTIONS • OWLET remote management and dimming options • Diffused glass for comfort • Back Light control system • WW & CW LEDs • Various types of mounting systems can be accommodated with tilting mechanism • IP 66 driver box with all the cables and fast connectors for an easy installation • Protection grid • Other RAL or AKZO colours
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 4/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
CONCEPT
1. Thermix® for long lasting performance The thermal management of LEDs is crucial for a luminaire’s reliability To maximise effectiveness and maintain flux over time, several parameters are optimised:
Thermal compartmentalisation between the LEDs and the control gear
Direct conduction by minimising the path between the heat source and the outside
Optimised design of the external heat exchange surface
OPTIONS
1. OWLET wireless remote management dimming & control system
The luminaires are pre-programmable, wireless programmable or remotely programmable and controllable. Each individual light point can be switched off/on or dimmed at any time. Operating state, energy consumption and failures are reported and stored in a database with the exact timestamp and geographical location. Owlet helps lighting managers to assure the right lighting level while reducing operating costs and maintaining a sustainable outdoor lighting scheme. The wireless Luminaire Controllers (LuCo) exist in different types, all of them are compatible with each other.
1. Shows status of all light points per zone, per street…
2. Defines dimming profiles automatically/manually
3. Produces reports automatically/manually (operating & consumption)
4. Alarm schemes (failures, faults, consumption via SMS, phone, email )
5. Connects to 3rd party systems
6. Data exchange with other servers
7. Data management
Available Luminaire Controllers:
LuCo-PD: Wireless Individual Luminaire Controller with integrated photocell that is mounted on top of the luminaire. Connected to the driver via a cable.
LuCo-NXP: Wireless Individual Luminaire Controller integrated inside the luminaire with shark fin antenna on top.
Both types of luminaire controllers can control of individual luminaires or clusters of luminaires. They build a bi-directional mesh network amongst each other to the Segment Controller (one SeCo per 100/150 light points).
The above mentioned LuCo’s, are commissioned either manually introduction in the web GUI (Graphical User Interface) or via the use of a wireless handheld device that allows automatic geo-positioning on the Owlet NightShift GUI.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 5/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
*Segment controller & Antenna + cable order number:
Equipment Order no. Description
Segment Controller 00-05-921 Segment Control
Segment Controller Cable + Antenna GSM/UMTS + Zigbee 2,4GHz
00-05-922 Cable 1m
00-05-924 Cable 2m
00-05-927 Cable 3m
00-05-925 Cable 5m
00-05-923 Cable 7m
00-05-926 Cable 10m
Commissioning tool C777260 TMGT Wireless Handheld Tool Kit
2. Motion and/or presence detection
Motion detection is compatible with any type of control or dimming system. It will enhance the efficacy of the installation by only increasing the light level when a vehicle or a pedestrian is detected.
2.1 Stand-alone luminaire
This solution needs to be integrated in each luminaire if the installation is equipped with regular dimming without remote wireless connection.
2.2 Stand-alone network of luminaires
To monitor stand-alone networks or luminaire clusters with motion and/or presence detectors. The location of the detection device can be multiple (for example, either attached or integrated in the luminaire or in a remote location. To detect the arrival of a person that requires light, the sensor can either be on one, on a selection of luminaires, on all luminaires or in a remote location for the most optimum detection. In that case, in addition to the sensor selection, the LuCo-ADP will serve as communication node in all of the luminaires in the network. Each sensor can be attributed to one or multiple luminaires and vice versa!
LuCo-ADP: Wireless Individual Luminaire Controller to manage a cluster of luminaires. The LuCo is integrated inside the luminaire with an antenna on the top. The luminaires communicate between each other via a bi-directional mesh network. A Master or Segment Controller is only temporarily required during the set-up of the system.
2.3 Remote wireless solutions (interoperable)
For installations with remote wireless solutions, the motion and presence detectors can also be located on one, on a selection of luminaires, on all luminaires or in a remote location to detect the arrival of people in the most optimum way. The LuCo-NXP and LuCo-PD will in that case play the role of the communication node. This option combines the functionality of the stand-alone network with remote wireless control.
2.4 Presence detection capabilities
The detection capabilities depend on the height of the installation and the type of sensor.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 6/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
The settings of the luminaire will determine: - The temporisation: the length of time a luminaire is switched on when a presence is detected - When the sensor is idle or in detection mode - The inclination of the luminaire influences the scope of the detection zone
The integration of sensors into round luminaires, needs to be synchronised and oriented according to the photometry and the motion path. Our staff is happy to help you with this analysis.
A stand-alone unit to integrate into a wireless Owlet control network; either autonomous or interoperable and equipped w/o PIR sensor:
Equipment Order no. Description
Moov-Box P6010000001beu P6010|MOOVBOX|NO SENSOR| LuCo-ADP
Moov-Box P6010000002beu P6010|MOOVBOX|WITH SENSOR|LuCo-ADP
Moov-Box P6010000003beu P6010|MOOVBOX|WITH SENSOR|LuCo-NXP
Moov-Box P6010000004beu P6010|MOOVBOX|NO SENSOR|LuCo-NXP
3. Dimming without wireless remote management
Custom dimming profile; Constant Light Output (CLO); Bi-Power dimming and Dali are available.
3.1 Custom Dimming
This option enables dimming profiles with up to 5 levels to adapt the light according to the real needs during the night. The dimming profile can be set up in two ways. The standard way determines the dimming profiles based on the middle of the night and is fully operational after 3 full nights. The second way (on request) determines that the night starts from the moment that the lights are switched on. The dimming profiles are immediately operational.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 7/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
3.2 Constant Light Output
This system compensates for the depreciation of luminous flux and to avoid excess lighting at the beginning of the installation's service life, providing substantial energy savings.
3.3 Bi-Power functionality
In several countries an extra wire, a so-called control wire or switched line, is distributed throughout the street lighting network. In most cases, when the street lighting is switched on, both the line and the switched line are energized to the 230V level. At a certain point during the night this switched line is switched off from the grid. The bi-power driver detects this signal as a command to reduce the output current to a lower preset value. In most cases this value equals 50%.
4. Photocell
The photocell will switch on the luminaire as soon as daylight has reached a certain level. The photocell is compatible with regular or programmable drivers. Our photocell catalogue is at your disposal should you require a particular photocell according to your regional requirements and regulations.
5. Advanced Photometry
5.1 Back Light control
Back Light control will prevent light spill from the back of the luminaire.
5. Other colours available
Other RAL or AKZO colours are available on request.
Standard lighting consumption LED lighting consumption with CLO Energy savings
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 8/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
LUMEN AND POWER DETAILS
Typical data for Neutral White (NW) LEDs (4000 K, CRI min. 70) at Tq 25° C.
Model Acronym Colour temp.
Flux code
Typical luminaire
output (lm)
Luminaire power
(W)
Luminaire efficacy (lm/W)
Current (mA)
Typical LED flux (lm)
LED Count
OMNISTAR OMNIOB NW 017A0 17700 161 110 350 21600 144 OMNISTAR OMNIOB NW 020A1 20600 206 100 500 25900 128 OMNISTAR OMNIOB NW 023A2 23900 228 105 500 29200 144 OMNISTAR OMNIOB NW 026A3 26800 285 94 700 33600 128 OMNISTAR OMNIOB NW 030A4 30900 322 96 700 37800 144 OMNISTAR OMNIOB NW 033A5 33600 431 78 1000 42200 128 OMNISTAR OMNIOB NW 038A6 38900 470 83 1000 47500 144
Typical data for Warm White (WW) LEDs (3000 K, CRI min. 80) at Tq 25° C.
Model Acronym Colour temp.
Flux code
Typical luminaire
output (lm)
Luminaire power
(W)
Luminaire efficacy (lm/W)
Current (mA)
Typical LED flux (lm)
LED Count
OMNISTAR OMNIOB WW 016A0 16500 161 102 350 20200 144 OMNISTAR OMNIOB WW 019A1 19300 206 94 500 24200 128 OMNISTAR OMNIOB WW 022A2 22300 228 98 500 27200 144 OMNISTAR OMNIOB WW 025A3 25000 285 88 700 31400 128 OMNISTAR OMNIOB WW 028A4 28900 322 90 700 35300 144 OMNISTAR OMNIOB WW 031A5 31400 431 73 1000 39400 128 OMNISTAR OMNIOB WW 036A6 36300 470 77 1000 44400 144
Typical data for Cool White (CW) LEDs (6200 K, CRI min. 70) at Tq 25° C.
Model Acronym Colour temp.
Flux code
Typical luminaire
output (lm)
Luminaire power
(W)
Luminaire efficacy (lm/W)
Current (mA)
Typical LED flux (lm)
LED Count
OMNISTAR OMNIOB CW 017A0 17700 161 110 350 21600 144 OMNISTAR OMNIOB CW 020A1 20600 206 100 500 25900 128 OMNISTAR OMNIOB CW 023A2 23900 228 105 500 29200 144 OMNISTAR OMNIOB CW 026A3 26800 285 94 700 33600 128 OMNISTAR OMNIOB CW 030A4 30900 322 96 700 37800 144 OMNISTAR OMNIOB CW 033A5 33600 431 78 1000 42200 128 OMNISTAR OMNIOB CW 038A6 38900 470 83 1000 47500 144
Note: The flux is an indicative average and may vary with the different optics and types of protector. Tolerance on LED flux is ± 7% and on total luminaire power ± 5 %.
The precise flux and corresponding matrix for each configuration are available on www.schreder.com
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 9/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
PHOTOMETRY
Examples of typical applications (non
restrictive list) Distribution type
LensoFlex®2 Collimator Reflector
Road,
Roundabout
Highways
Street light (5136AS, 5137AS, 5138AS, 5139AS)
128 LEDs NA NA
144 LEDs NA NA
Sport
Architectural illumination,
Monuments and façades
Directional beams
(5125CO,5126CO,5127CO, 5128CO)
NA 144 LEDs
Sport
Large Areas (parking, highway, airport APRON)
Asymmetrical beams
2258AS,2259AS,2260AS, 2261AS,2266AS,5120AS, 5121AS,5119AS)
128
or
144 LEDs
NA 144 LEDs
Industrial high-bay, warehouse, expedition zone
Tunnel
Car parks
Symmetrical beams 128
or
144 LEDs
NA 144 LEDs
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 10/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
2258AS
Asymmetrical
Asymmetrical 65°
2259AS
Asymmetrical
Asymmetrical 10°
2259SY
Symmetrical
Asymmetrical 10°
2260AS
Asymmetrical
Asymmetrical 40°
2260SY
Symmetrical
Asymmetrical 40°
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 11/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
2261AS
Asymmetrical
Asymmetrical 55°
2261SY
Symmetrical
Asymmetrical 55°
2261SY
Symmetrical
Asymmetrical 55°
5068
Wide
5118
Medium
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 12/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
5119AS
Asymmetrical
Extra-wide
5120AS
Asymmetrical
Asymmetrical 40°
5121AS
Asymmetrical
Asymmetrical 60°
5125CO
Narrow beam
Narrow beam
5126CO
Medium beam
Medium Beam
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 13/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
5127CO
Wide beam
Wide Beam
5128CO
Elliptical
Elliptical beam
5136AS
Narrow
5137AS
Medium
5138AS
Medium
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 14/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
5139AS
Wide
5140AS
Medium
5141AS
Wide
6293AS
Elliptical beam
6294AS
Narrow beam
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 15/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
GEAR BOX
Outdoor remote cabinet for 1 Optical block (01) also available for 2 or 3 optical blocks
Fixation holes (vertical wall mounting)
Cable entries: Input Cable grommet Ø 6-13
Cable grommet Ø 12-24
Output Connector (Wieland R5T20i 5 poles / blue coded)
Indoor remote gear box (I1) also available for 2 or 3 optical blocks
Fixation holes: 4 x Ø5.5
Cable entries: Input 2 x Cable grommets Ø 6-13
Output Connector (Wieland RST20i 5 poles / blue coded)
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 16/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
CABLES
Please refer to the Cable ordering module where you can select the type of power cable and if needed a data cable
for DALI control.
The optical block (OB) is delivered with an outgoing cable (0.8m) as in the picture below. It can be connected directly to the gear box (indoor or outdoor).
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 17/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
In case a remote gearbox or cabinet (up to 40m) is installed another cable (with connectors) must be used:
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 18/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
FIXATIONS
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 19/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
BRACKET DIMENSIONS
Bracket with 1 optical block - standard U type
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 20/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
>> Accessory: vertical pole mounting kit for pole Ø60mm (standard bracket)
Bracket with 1 optical block - Large U type (e.g. wall mounting)
>> Accessories Mounting kit for horizontal pole - Ø76-108mm
• Post-top (Ø60mm) mounting adapter
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 21/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Mounting kit for vertical pole - Ø76mm
Bracket with 1 optical block - Surface mounted tiltable
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 22/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Bracket with 1 optical block - Surface mounted (e.g. tunnel)
Bracket with 1 optical block - suspended
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 23/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Bracket with 2 optical blocks - vertical pole mounting
Bracket with 2 optical blocks - large U type brackets for horizontal tube
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 24/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 25/25
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
Bracket with 2 optical blocks - large U type brackets for horizontal tube
Your solution is a combination of 2 to 5 modules. You choose the different features to create structured lines of ordering codes.
How to create a valid ordering code for eacH module?
+ + +
MODULE OB
optical block
MODULE GB
gear box
MODULE CA
cables
MODULE FI
fixation
MODULE AC
accessories
+
Depending on your choice of colour temperature, please refer to the corresponding table to find the flux code for the typical lumen pack-age you require(*). Please check the Product ID to make sure that the lumen package you need is available with the size you have chosen.
To choose the photometry, refer to the 4 digit codes beside the curves and diagrams(*). AS = asymmetrical, SY = symmetrical and BL = Back Light control.
(*) The precise flux and corresponding matrix for each configuration are avail-able on www.schreder.com
To configure the ideal solution between the features you need and the available controllers, refer to the description in the Product sheet.
Product id
(6 digits)
Universal(2 digits)
colour temperature + Flux code
(7 digits)
Photometry type
(6 digits) Protector type
(2 digits)
Voltage & elec. class + Dimming
+ Elec. protection (8 digits)
Power cable type
(4 digits)Controller + Photocell +
Sensor(4 digits)
colour(2 digits)
OnLy wITh STAnDArD feATureS
wITh cuSTomiSeD
requeSTS
iso 3166 country
code(2 digits)
custom photometry
Voltage & elec. class + Custom
dimming + Elec. protection (8 digits)
custom power cable
(4 digits)
Customised options (Photometry, Label, finishing) for which you will receive a specific code
(4 digits each)
Specific RAL colour
(8 digits)
ExAmPLeS of vALiD orDering coDeS for moDuLe oB
ProDob - 00 - nW015A0 - 5119AS - gL01 - v16D00S0 - c000 - c000 - f0 - Am - A6 - 0n
Fixation(2 digits)
Options(2 digits
each)
ProDob - AT - nW015A0 - cuSTom - gL02 - v16D00S0 - cAZZ - c000 - f0 - PXXX - LXXX - fXXX - rAL3005m
go to the ordering Data page(s) and select one code per column in order to specify the characteristics of the optical Block. You may choose several options. Please refer to the footnotes to check compatibility between the selected features.
Choose your Flux, Photometry and Control codes by referring to more detailled information included in the Product Sheet.
module ob - optical block
Repeat this procedure for the other modules and select one code per column. You may choose several options if required. Please check compatibility between the specified modules
and pay attention to the footnotes under each table in order to create a fully operational complete solution.
module gb - gear box
eXAmPLe of A vALiD orDering
CODEgear id(6 digits)
Country: universal
(00) or iso 3166 code
(2 digits)
Optical block
quantity (2 digits)
Optical block type
(5 digits)
Voltage, elec. class, dimming and elec.
protection (8 digits)
Input/output
connection (3 digits)
Controller, photocell
and sensor (4 digits)
ProDgb - 00 - o2 - 027A1 - v02D04Se - X00 - c000 - A2AmA6AA - DXXX - LXXX - fXXX - oXXX - ZZ
Options (2 digits each)
colour (2 digits)
Customised options (Dimming, Label, finishing & others) for which you
will receive a specific code (4 digits each)
eXAmPLe of A vALiD orDering
coDe for PoWer cABLe
Cable ID(6 digits)
Country: universal
(00) or iso 3166 code
(2 digits)
Cable function (power) (2 digits)
Cable length & type
(5 digits)
ProDca - 00 - Pc - P334c
module ca - cables
module fi - fixation
eXAmPLe of A vALiD orDering
CODEFixation
id(6 digits)
Fixation type
(2 digits)
Options (2 digits)
colour (2 digits)
ProDfi - W1 - A6 - on
module ac - accessories
eXAmPLe of A vALiD orDering
CODEAccessory
id(6 digits)
Accessory type
(2 digits)
Options (2 digits)
colour (2 digits)
ProDac - Ag - A6 - on
eXAmPLe of A vALiD orDering
coDe for DATA CABLE
Cable ID(6 digits)
Country: universal
(00) or iso 3166 code
(2 digits)
Cable function
(data) (2 digits)
Cable length & type
(5 digits)
ProDca - 00 - DA - D26DA
eXAmPLe of A vALiD orDering
coDe for COnnECTIOn
CABLE
Cable ID(6 digits)
Country: universal
(00) or iso 3166 code
(2 digits)
Cable function
(connection OB/GB) (2 digits)
Cable length & type
(5 digits)
ProDca - 00 - co - L175c
ID COUNTRY FIXATIONS OPTIONS COLOUR
PRODUCT
ID
COUNTRY OF
INSTALLATION
[1]
COLOUR
TEMP
FLUX
CODE [2]
PHOTOM
ETRY
TYPE [3]
PROTECTOR VOLTAGE & EL.
CLASS
DIMMING ELECTR. PROTECTION POWER
CABLE
CABLE TYPE CONTROLLER PHOTO CELL SENSOR FIXATIONS OPTIONS [5] COLOUR
OMNIOB 00 NW 5119AS GL01 V16 D00 S0 CA 00 C0 0 0 F0 N0 0N
Universal
Standard
Neutral
White 5120AS
Flat Glass Current DC CLI No Dimming no SPD - no Fuse Standard
Cable
No Cable No Controller No Photocell No Sensor No Fixation No Others AKZO 900 GS
AO WW 5121AS GL02 V17 5C A6 RALxxxx M
Angola Warm
White 5136AS
Flat diffuse
Glass
Current DC CLII 5G0.75² SeaSide Other RAL colour
Matte
AR CW 5137AS ZZ AM RALxxxx B
Argentina Cold White
5138AS
CUSTOM
CABLE
quick-on
connector
Other RAL colour
Brilliant
AU 5139AS AA RALxxxx T
Australia
5140AS
Special labelling Other RAL colour
Textured
… 5141AS PXXX ZZ
5068AS
Photometry
custom
Other specific
paint*
5118AS LXXX
2258ASLabel custom
2258SY FXXX
2259AS
Finishing Colour,
vernish, …
2259SY
2260AS
2260SY
2261AS
2261SY
5125CO
5126CO
5127CO
5128CO
6293AS
6294AS
2266AS
CUSTOM*
OMNIOB _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ V_ _ D _ _ S _ C _ _ _ C _ _ _ _ _ _ _ _ _
Example:
[2] See further Lumen and Power details table. [3] See further Photometrics table.
[4] Schréder fixtures are compatible with most controls equipment available on the market. Please contact Schréder for more information.
[5] Multiple SELECTIONS and VARIANTS concatenation possible eg. -A2-AA-P0Z0-D0W0-C0Y0-S0M0-L0H0.
*Please contact Schréder to specify your requirement. A custom requirement must be validated by Schréder and may impact the delivery leadtime.
OMNIOB-00-NW015A0-CUSTOM-GL02-V16D00S0-CA5C-C000-F0-AMA6AA-PXXX-LXXX-RAL1000 B
Notes: +++ Not all photometries available for all LED configuration please check compatibility in the OMNISTAR PRODUCT SHEET
[1] Please provide country of installation to ensure country specific settings are taken into account. Schréder will provide you the code to use (00 (universal standard) or the country's ISO code).
Module ODORDERING DATA OMNISTAR
OPTICAL BLOCK GEARS CONTROLS [4]
Your Order
Omnistar Product Sheet - 18/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
OPTIONS COLOUR
GEAR ID COUNTRY OF
INSTALLATION [1]
Voltage & El. Class Connected
Lu. Type
Voltage & El.
Class
Dimming c
E
l
e
El. Protection Input / Output
connection
Controller Photocell Sensor Options Colour
OMNIGB 00 I1 V01 D00
S
4S4 X00 C0 0 0 N0 0N
Universal Standard indoor for 1 OB 120V CLI No Dimming 1
0
10kV + Fuse lamp connection
only
No Controller No Photocell No Sensor No Others AKZO 900 GS
AO I2 V02 D01
S
9S9 C1 A2 RALxxxx M
Angola indoor for 2 OBs 230V CLI 0 - 10V 1
0
10kV + Fuse 5x20mm Time Lag 3A LuCo-NXP Gear plate Other Ral color Mat
AR I3 V03 D02
S
ASA C2 A6 RALxxxx B
Argentina indoor for 3 OBs 230V CLII DALI 1
0
10kV + Fuse 5x20mm Time Lag 4A LuCo-ADP SeaSide Other Ral color
Brilliant
AU O1 D04 SB AA RALxxxx T
Australia outdoor for 1 OB Custom Dimming Profile 10kV + Fuse 5x20mm Time Lag 5A Special labeling Other Ral color
Textured
AT O2 D15 SC DXXX ZZ
Austria outdoor for 2 OBs Telemanagement 10kV + Fuse 5x20mm Time Lag 6.3A Dimming profile custom Other specific paint
BE O3 SE LXXX
Belgium outdoor for 3 OBs 10 kV + Fuse Cartridge 10x38mm 4A
Type GG500V
Label custom
SF FXXX
10 kV + Fuse Cartridge 10x38mm 6A
Type GG500V
Finishing Colour , vernish, …
SG OXXX
10 kV + Fuse Cartridge 10x38mm 10A
Type GG500V
Others
OMNIGB _ _ A 000A0 A _ _ _ _
_
000A0 _ _ _ _ _ _ _ _ _ _
Example OMNIGB-00-O2-027A1-V02D04SE-X00-C000-A2AMA6AA-DXXX-LXXX-FXXX-OXXX-ZZ
[1] Please provide country of installation to ensure country specific settings are taken into account. Schréder will provide you the code to use (00 (universal standard) or the country's ISO code).
Notes LuCo-NXP and LuCo-ADP available only with D15 Telemanagement +++ Dali & 0-10V not available with 1000mA
ORDERING DATA OMNISTAR Module GB
GEAR CONTROL
Your Order
OPTIONS
CABLE ID COUNTRY OF
INSTALLATION [1]
CABLE MODEL Power Cable CABLE TYPE Data Cable CABLE TYPE LED / Gearbox Connection CABLE TYPE Options
OMNICA 00 PC P27 00 D17 DA L12 5C N0
Universal Standard Power Cable Cable length 4m No Cable no connector - dali female - 2m DALI Cable length 4m (without NTC) 5G0.75² No Others
AO DA P28 2C D18 ZZ L13 ZZ CXXX
Angola Data Cable Cable length 5m 2X1.5² dali male - dali female - 2m CUSTOM
CABLE
Cable length 5m (without NTC) CUSTOM CABLE Cables custom
AR CO P29 2D D21 L14
Argentina Connection OB/GB Cable length 6m 2X2.5² no connector - dali female - 10m Cable length 6m (without NTC)
AU P30 3B D22 L15
Australia Cable length 7m 3X1.5² dali male - dali female - 10m Cable length 7m (without NTC)
AT P31 3C D25 L16
Austria Cable length 8m 3G1.5² no connector - dali female - 40m Cable length 8m (without NTC)
BE P32 3D D26 L17
Belgium Cable length 9,5m 3X2.5² dali male - dali female - 40m Cable length 9,5m (without NTC)
P33 3E D27 L18
Cable length 12m 3G2.5² Dali male connector Cable length 12m (without NTC)
P34 4C D28 L19
Cable length 40m 4X1.5² Dali female connector Cable length 40m (without NTC)
4D
4G1.5²
4E
4X2.5²
4F
4G2.5²
5B
5G2.5²
ZZ
CUSTOM CABLE
_ _ _ _ _ _ _ _ _ _ P_ _ _ _ D_ _ _ _ L _ _ _ _ _ _
Example OMNICA-BE-PC-P272C
Notes:
[1] Please provide country of installation to ensure country specific settings are taken into account. Schréder will provide you the code to use (00 (universal standard) or the country's ISO code).
ORDERING DATA OMNISTAR Module CA
Your Order
Options for Cable Model
POWER CABLE DATA CABLE CONNECTION OPTICAL BLOCK / GEARBOX
ORDERING
DATA
COLOUR
Fixation ID Fixation Options Colour
OMNIFI B1 N0 0N
Standard U type bracket No Others AKZO 900 GS
B5 A6 RALxxxx M
Wall mounting U type Large bracket SeaSide Other RAL colour
Matte
PH FXXX RALxxxx B
Vertical Pole mounting for Standard U bracket type Finishing Colour ,
vernish, …
Other RAL colour
Brilliant
PI RALxxxx T
Vertical Pole mounting for large U bracket type Other RAL colour
Textured
PJ ZZ
Post top with Large U type brakcet Other specific paint*
PK
Side entry with Large U type brakcet
W1
Tiltable braquet
W2
Fix Bracket for Surface Mount
S1
Suspended bracket
PL
Pole mounting standard 2 units
PM
Pole mounting standard 3 units
PO
Pole mounting standard 2 unit prepared for Standard U type bracket
_ _ _ _ A1 _ _ _ _
Example OMNIFI-W1-A6-0B
OMNISTAR
COLOUR
Your Order
Module FI
ORDERING
DATA
COLOUR
Accessory ID TYPE Options Colour
OMNIAC AG N0 0N
Protection grid No Others AKZO 900
A6 RALxxxx M
SeaSide Other RAL colour
Matte
FXXX RALxxxx B
Finishing Colour ,
vernish, …
Other RAL colour
Brilliant
RALxxxx T
Other RAL colour
Textured
ZZ
Other specific paint*
_ _ _ _ A _ _ _
Example OMNIAC-AG-A6-0Z
OMNISTAR
COLOUR
Your Order
Module AC