1-1
VIB
XPE
RT 0
4.04
OMNITREND®
PC Softwarefor Windows
Version 2.1xEdition June 2006
VIB 9.631.G
Getting started
Dear customer,
We are grateful for your trust and hope that you are happywith our product. If you have any suggestions for improvingthis product or this instruction manual, please let us know.
PRÜFTECHNIK Condition Monitoring
Fax: (089) 99616-300eMail: [email protected]
2
OM
NITREN
D - G
etting started 06.06
© 2004 PRÜFTECHNIK Condition Monitoring; all rights reserved
Both this manual and the product it describes are copyrighted. All rights belong tothe publisher. The manual may not be copied, reproduced, translated or madeaccessible to a third party in any form, neither in its entirety nor as an excerpt.
No liability may be claimed against the publisher regarding the product described inthis manual. The publisher assumes no liability for accuracy of the manual contents.Furthermore, under no circumstances may the publisher be held liable for direct orindirect damage of any kind resulting from use of the product or the manual, even ifthe publisher has expressly indicated the potential for occurrence of such damage.
The publisher assumes no liability for any product defects. This warranty and liabilitylimitation applies to all distributors and sales partners as well.
The trademarks mentioned in this manual are generally noted as such and are theproperty of their owners. Lack of such designation does not imply, however, thatnames are not protected by trademark laws.
Notes regarding data lossWith any data processing software, data may be lost or alteredunder certain circumstances. PRÜFTECHNIK Condition Monitoring stronglyrecommends that you make backup copies of all important data on a regularbasis.
PRÜFTECHNIK Condition Monitoring assumes no responsibility for datalost or altered as a result of improper use, repairs, defects, batteryreplacement/ failures or any other cause.
PRÜFTECHNIK Condition Monitoring assumes no responsibility, directlyor indirectly, for financial losses or claims from third partiesresulting from the use of this product and any of its functions, suchas loss or alteration of stored data, etc.
3
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6
Foreword
Congratulations! And thank you for choosing one the of the tried andtested products of PRÜFTECHNIK Condition Monitoring. Whether itis a handy data collector and vibration analyzer, or one of theintelligent online systems - all PRÜFTECHNIK instruments work withthe same PC software and use the same database for archiving thecollected measurement data: OMNITREND.
The advantages are obvious:• Only one software package to install and update• Measurement data of all measurement systems are administrated
in a single database• Short learning curve if expanded to include other PRÜFTECHNIK
measurement systems• Homogeneous data structure
OMNITREND helps you in the preparation of measurement tasks,supports you in the analysis of the results and provides a number ofpractical functions for the archiving and documentation of results.
For further information visit us on the Internet under:
http://www.pruftechnik.com
Foreword
About this manualThis operating manual describes the first steps for commissioning theOMNITREND PC software - from installation and starting up theprogram to registration of the software and individual measurementdevices.
Information for the operation of OMNITREND and a completedescription of all program functions are contained in the OMNI-TREND operating manual which is available as a WORD file on theCD ROM.
The contents of the OMNITREND operating manual are reflected inthe OMNITREND online help which can be called up in the programwith the 'F1' function key.
This manual should be freely available for everyone who works withthe OMNITREND PC software. This manual is valid for softwareversion 2.1x and higher.
4
OM
NITREN
D - G
etting started 06.06Foreword
Contents
What's new? .................................................................. 5OMNITREND version 2.11 ..................................................................5
Safety notes ........................................................................ 9
PC requirements ............................................................ 9
Installation ................................................................... 10Installing OMNITREND PC software & StandardReports .................... 10PC software installation for Online systems ...................................... 13
Starting OMNITREND .................................................. 16OMNITREND with Microsoft Access database ................................... 16OMNITREND with ORACLE database ................................................ 17
Registration.................................................................. 19Registering the full version ............................................................... 20Enabling communication with a data collector (offline device) .......... 25Enabling communication with an Online system ............................... 27Registering optional software modules ............................................. 29
Update & Uninstall ...................................................... 30Uninstalling OMNITREND ................................................................. 31
5
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6What's new?
What's new?
OMNITREND version 2.11
General• Context-sensitive online help: The online help has been restruc-
tured and now displays information relevant to the section fromwhich you called it up in OMNITREND.
• New OMNITREND login window: The new login window lets youselect the database and the database type. You can reposition orminimize the window as required.
• Extended OMNITREND general settings: The new functions are:Starting of Standard Reports in the background / Conditions forthe alarm status check (AlarmCheck) / Display of cursor coordi-nates / Automatic zoom function / Display of waterfall spectra.
Meas. data Viewer• Linked diagrams: Diagrams within a single window can be linked
so that the cursor and zoom function acts on all diagrams at once.
• Window arrangement in the MultiView overview: All windows arearranged vertically by default. This arrangement can be changedusing the mouse (Drag&Drop). Also, diagrams in the MultiViewcan now be closed individually.
• Simplified zoom function:To magnify an area of the diagram, aframe can be dragged around the area using the mouse. It is nolonger necessary to switch between cursor and zoom mode.
• More rapid selection of signal measurements: Individual signalmeasurements at a measurement location can now also be selectedin the date field of the diagram.
• Buttons for calling up cursors: Three new buttons for the main,delta and harmonic cursors make it easier to call up these cursorfunctions and use them to evaluate measurement data.
• Buttons for calling up frequency markers: A new button in the iconbar can be used to conveniently display the frequency markers inthe diagram.
Database• Database optimization: Applying the new database compression
function to the database will shrink the database to about half itssize on average. This function is found under Database / Databaseutilities.
• Deleting measurement data: The same menu contains a functionfor deleting older measurement data from the database. The dateis entered as the deletion criterion.
Machinery manager• Measurement tasks can now be deactivated within the route: The
existing option for online systems for hiding measurement tasks in
6
OM
NITREN
D - G
etting started 06.06What's new?
a measurement cycle has been extended to work with datacollectors. You can now exclude individual measurement locationsand tasks from a measurement route. This change became neces-sary because measurement tasks no longer appear in the routeeditor and therefore cannot be removed from the route.
• Adaptive measurement task: For the same reason as above, thefunction for setting up an adaptive measurement task was movedto the Machinery Manager. To set up an adaptive measurementtask, use Drag&Drop to drag the measurement task to the new‘Adaptive measurement task’ tab.
• ‘Additional info’ tab enhanced: You can now save additionalinformation for each Location and Database hierarchy.
Alarm editor• Synchronizing / deleting alarm bands: You can synchronize or
simultaneously delete alarm bands from different measurementtasks. This function can only be used in combination with theMultiEdit Wizard.
• Alarm mask is now defined as a (broad) alarm band: The alarmmask is no longer defined as the baseline of all narrowband alarmbands. It is now a so-called alarm baseband that encompasses allfrequencies not monitored in a narrow alarm band. Thus, a bandanalysis can also be set up for the alarm baseband, i.e. acharacteristic value can be recorded as a trend.
• Edge values for (broad) alarm bands: The width of RPM-indepen-dent alarm bands can now be entered using edge values (f1 andf2). However, the alarm editor always shows the correspondingvalues for the center frequency and the bandwidth.
• Offset alarm level can be calculated from several basic spectra:When setting up alarm levels on the basis of an offset (% orabsolute), you can now use multiple base spectra for the calcula-tion. The offset is calculated from the linear average value acrossall base spectra.
• Alarm type as new alarm band parameter: Peak is the largestamplitude, and Power is the signal power in the alarm band.
Alarm editor for online system:Dynamic adjustment of alarm level• In variable-speed measurements, the alarm level can be adjusted
using polynomial functions. The polynomial parameters are en-tered in OMNITREND and loaded into the online system togetherwith the measurement cycle. The alarm level then tracks the RPMin the online system.
Route editor• New Route Editor design: The Route Editor layout corresponds to
that of the Template Editor. The Route Editor now contains a routelist for the convenient selection of individual routes and providesvarious processing functions (New, Delete, Copy...).
7
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6What's new?
• Display filter for route hierarchies: In the Route Editor you can setthe hierarchies that should be displayed for the route:only the machine trains in the route, only the machine trains andmachines in the route, or machine trains, machines and measure-ment locations in the route.
ATTENTION! Unlike the earlier version, measurement tasks are notdisplayed in the Route Editor. The Disable in route assignment ismade in the Machinery Manager (‘Measurement type’ tab). Conse-quently, the ‘adaptive measurement tasks’ for the route are now setup in the Machinery Manager (‘Adaptive measurement task’ tab atthe Measurement Task level).
Route for VIBXPERT:Order of measurement locations can be changed as required• The order of measurement locations in the route can be changed
independent of their position in the tree structure.
Route for VIBXPERT:Adjustable measurement channel• For each measurement location you can define whether measure-
ments should be made with channel A or channel B.
Measurement cycle for online system:• Sorting of measurement locations (=channels) according to online
system: In the Route Editor, you can select the online system forwhich you would like to create the measurement cycle. Measure-ment locations associated with another system in the MachineryManager are sorted out.
• Expanded filter options for route transfer to the device: Thefollowing transfer options are available in addition to the existingoptions (all measurement locations / due measurement locationsor measurement locations with alarm):Only transfer measurement locations of machines or machinetrains with alarm.Only transfer measurement locations of machines or machinetrains that are due.
Transducer editor• Units and labels for user-defined parameters: For calculated mea-
surement parameters you must enter the unit and label for the Xand Y axes.
Setup editor• AC-DC filter for VIBROWEB XP: Filters for signal measurement
with VIBROWEB XP / WinTControl are now set up in the SetupManager. Duplicate a corresponding factory setup to change thefilter settings. In earlier versions, the filter setting was located inthe ‘Device instructions’ tab.
8
OM
NITREN
D - G
etting started 06.06
Template editor• Production test: This option is used to deactivate automatic
processing of a machine template with VIBXPERT. Doing so will letyou perform the same measurement task a number of times. This isuseful during a production test, for example, where you can carryout the same measurement task under varying operating condi-tions. The individual measurement tasks in the template are calledup manually.
Standard Reports• New report module based on OMNITREND WebReport: Standard
Report is a free add-on to the OMNITREND reporting feature. Itoffers a limited selection of functions available in WebReport.
Online systems• eMail to multiple recipients: eMails can be sent from the online
system to up to 10 different recipients (VIBNODE: max. 3 recipi-ents). The settings are located in the configuration window underOptions / Edit.
(In VIBNODE: configuration window under eMail)
• Data import via external drive (USB stick): Measurement datafrom the online system (except for VIBNODE) can now beimported into the database from an external drive, such as a USBstick. This option is found in the configuration window in theImport channel field.
What's new?
9
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6PC requirements
PC requirements
OMNITREND runs on any desktop or laptop PC that meets thefollowing minimum configuration requirements:
Operating system (OMNITREND for data collector - offline)Windows 98 SE / 2000 (SP2) / XP
Operating system (OMNITREND for Online systems)Windows 2000 (SP2) / XP (SP1)
ProcessorPentium III 400 MHz or faster; 1,8 GHz recommended
RAM256 MB; 512 MB recommended
Hard disk600 MB free, 1GB recommended
DriveCD-ROM required for program installation
MonitorVGA Color (800 x 600)
Mouserequired
InterfaceRS232 (USB to RS232 converter* where applicable),Ethernet for Online systems (recommended for VIBXPERT)
JavaSun Java Runtime 1.4.2_08 (+ Security run time parameter)
Browser for Online HelpMozilla all versions; Internet Explorer 5 or later
PrinterWindows-compatible
Attention !
Safety notes
The OMNITREND database contains important machine informati-on whose loss can result in considerable costs. Thus, a reliable databackup system (‘Backup’) is necessary to avoid consequentialdamage arising from data loss.
The data collector / Online system firmware must be updated tothe newest version.
* Recommended:D-Link DU-CSBelkin F5u103 / F5u109Quatech SSU-100Xircom PGSDB9
10
OM
NITREN
D - G
etting started 06.06
Windows 2000 / XP: Administrator rights are required for installa-tion.
In order to use ORACLE or MS SQL databases respectively, theappropriate ODBC driver is required.
Networks: OMNITREND only supports single terminal login. Nomore than one user can log into the program at the same time.
Installation
Installing OMNITREND PC software & StandardReports• Insert the PRÜFTECHNIK CD-ROM* into the CD drive and wait for
the starting screen to appear.If the CD does not start automatically, double-click on the‘Start.exe’ file in the CD directory.
• For a new installation click on <OMNITREND>, then click on<Start Installation>:
Installation
* = 'OMNITREND for product name' or'Condition Monitoring Suite' (VIB8.970)
�Note
11
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6
The installation program starts:
• Select the language for installation and click on <OK>:
In accordance with the subsequent installation note, close all openapplications - particularly all AntiVirus programs and PersonalFirewalls. Click on <OK> to continue....
Java InstallationThe Java environment required for StandardReports is installedautomatically, regardless of whether another Java environment isalready found on the computer or not.
The software is installed locally in the ‘Prüftechnik’ directory (C:/Programme/Prueftechnik/_jvm/).
Installation
Once JAVA has been successfully installed, the installation of theOMNITREND software follows.
12
OM
NITREN
D - G
etting started 06.06Installation
OMNITREND installation• Select 'OMNITREND PC software' and 'OMNITREND Standard-
Report' and click on <Next>.
• In the following screen, click on <Install> to start the installation.
The OMNITREND PC software is installed first, followed by theinstallation of OMNITREND Standard Reports.
OMNITREND Standard Report is an extra program provided free-of-charge for creating reports from the data of the OMNITRENDdatabase.
To complete the installation, the PC must be restarted.
�Note
13
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6Installation
PC software installation for Online systemsVIBRONET Signalmaster / VIBROWEB / VIBROWEB XP
In order to communicate with the online system and to exchangedata, the following files and programs must be installed on the PC.
- JAVA plug-in for displaying JAVA applets in the browser- Browser for displaying the HTML pages (user interface)- FTP server (Serv-U) for exchanging data via FTP
In addition, the data server and the directories required for archivingdata are installed on the PC. The installation program checks whetherthe necessary components are already installed on the PC andwhether the versions fulfill requirements. If necessary, the programslisted above will be re-installed or updated.
• Insert the OMNITREND CD* into the CD drive and wait for thestarting screen to appear.If the CD does not start automatically, double-click on the‘Start.exe’ file in the CD directory.
• Click on “Online Systems”, and then on “Start installation” toinstall the software:
* = 'OMNITREND for product name' or'Condition Monitoring software' (VIB8.970)
• In accordance with the subsequent installation note, close all openapplications - particularly all AntiVirus programs. Click on <OK>to continue.
14
OM
NITREN
D - G
etting started 06.06
The Java components are installed next.
The Java plug-in is required to correctly display the Java Applets ofthe HTML pages. The HTML pages form the user interface of theonline system during access via browser. If an unsupported Javaversion is already installed on the PC (any version, except version1.4.2_XX), you must delete this before continuing with theinstallation.
• Select the "Install this program" option and click on <Next>.
• Confirm the resulting license agreement for the Java Plug-in andclick on <Next>.
• In the next window select the ‘Typical’ option as the type ofinstallation and click on <Next>.
• Select the browser for which the Java Plug-in should be registered.Click on <Next> to start the Java installation.
• Then click on <Finish> to complete the installation of the JavaPlug-in.
The software components required for online systems on the PC (FTPserver, data server, station directory) are then installed.
The FTP server is required to transfer the data from the onlinesystem to the PC and back. The data server converts the measure-ment data into an OMNITREND-compatible format. The configura-tion files, measurement cycles and measurement data of thecorresponding online system are located in the station directory.
• Confirm the software license agreement and click on <Yes>.
• Enter the installation directory and click on <Next>. Standarddirectory = ‘C:/pt_cm/online’.
The FTP server is installed in the installation directory intended forWindows programs (e.g. ‘Program_files’). Note that the FTP serverand the remaining components must be installed on the same diskdrive (e.g. ‘C:’).
The FTP server is set up as a ‘System Service’. Thus the programstarts automatically as soon as data is requested from the onlinesystem.
• In the next window click on <Finish> and restart the PC tocomplete the installation.
Installation
�Note
�Note
�Note
15
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6Installation
The following directories are created in the installation directory:.../datadatadatadatadata (import directory for the data server).../software/autoimportsoftware/autoimportsoftware/autoimportsoftware/autoimportsoftware/autoimport (data server).../station_namestation_namestation_namestation_namestation_name (station directory for the online system (= nameof the system))
• Create a desktop link to the fileInstallation pathInstallation pathInstallation pathInstallation pathInstallation path /software/autoimport/autoimport.bat /software/autoimport/autoimport.bat /software/autoimport/autoimport.bat /software/autoimport/autoimport.bat /software/autoimport/autoimport.batThis link is used later to start the data server.
Additional online systems can be added or current systems deleted/renamed directly in OMNITREND.
16
OM
NITREN
D - G
etting started 06.06
Starting OMNITREND
OMNITREND with Microsoft Access database
• Click on <Start> in the Windows task bar.
• Click on <Execute> in the START menu, and enter the programpath:
C:\Programs \ Pruftechnik \ Omnitrend \ Omnitrend.exe
If OMNITREND is in another directory, enter the corresponding path.
The OMNITREND login window appears:
Starting OMNITREND
• Enter the user name and the password if necessary, and click on<OK>.If you are starting the program for the first time, enter the username 'guest'.The database that was used last is opened; the first time theprogram is started, this is the demo database.
• If you would like to open another database, click on orrespectively, to open the 'Recent databases' pull down menu or the'File select' dialog window.
• Select the new database file (*.mdb) and click on <OK>.
17
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6
OMNITREND with ORACLE database
In order for OMNITREND to be able to open an ORACLE database,the optional ‘ORACLE’ module must be registered. Use a standard'Access' database to start OMNITREND for registration (p. 29).
• Start OMNITREND (see previous section):
Starting OMNITREND
• Select ‘Open ORACLE / ... Database’, and then click on :
�Note
• Open the ‘Computer data source’ tab, and select the ORACLEdatabase (here: ‘OMNI_ORC’). Click on <OK>:
18
OM
NITREN
D - G
etting started 06.06
• Select the ORACLE file to be opened in the selection list on theright (here: ‘A_VIBSCANNER’; Equivalent to an OMNITREND(access) database).
• Then click on <OK>.
If you have any questions about ORACLE, please contact yourORACLE administrator.
Starting OMNITREND
�Note
19
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6
Registration
The registration procedure in OMNITREND consists mainly of threeparts:
Registering the full versionOMNITREND is delivered as a demo version where the route functionand data exchange are inactive. The user can only work with thedemo database that is supplied in order to find out how to use theprogram. In order to evaluate the user’s own measured data and tocreate routes, the full version must be activated with a registrationpassword.
The password for the purchased OMNITREND version (e.g. ‘OMNI-TREND for VIBROTIP’, VIB 8.862) is free-of-charge but must berequested by ‘Return Fax’ and entered in OMNITREND as describedin the following section. A charge is made for the registration of anyadditional device types (e.g. VIBSCANNER, VIBXPERT, VIBROWEB,etc.).
Activating communication with OMNITRENDSo that the data collector / online system can receive routes andtransmit measured data to the PC, it must be registered in OMNI-TREND with its individual serial number. A so-called ‘PC licence’ forone device is included in the scope of delivery. For each furtherdevice, a charge is made for the PC licence.
Registering optional software modulesThe range of functions of the OMNITREND software can be extendedas required.
- Gear editor - VIB 8.961- Signal analysis - VIB 8.962- ORACLE databse - VIB 8.963- SQL database - VIB 8.964
A charge is made for the passwords required for registration.
Registration
20
OM
NITREN
D - G
etting started 06.06
Registering the full version
Definition
Measurement device = an individual device identified by its IDnumber.
OMNITREND version (= device type )= OMNITREND for theappropriate device type (e.g. OMNITREND for VIBSCANNER).
Device type = All measurement devices of the respective type (z.B.all VIBSCANNER devices).
OMNITREND is a multi-device software that works with the follow-ing PRÜFTECHNIK measurement devices:
After the first-installation of OMNITREND, the software runs in thedemo mode for the purchased device type.
Example:If you have purchased ‘OMNITREND for VIBSCANNER’ (VIB 8.955)you will have the following start screen after the first installation:
OMNITREND for VIBSCANNERruns in the demo mode
In the demo mode the following functions are locked:
• Data exchange• Route Editor
Registration
�Note
21
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6
To register the full version, proceed as follows:
1. Click on <Options> / <Registration/Configuration> :
1.
2. Click on <Request password>
3. Enter the customer data (Company name / Address) and the CDserial number*
4. Select the device version if applicable **.
2.
3.
4.
* This 10-digit number is given on theOMNITREND CD ROM.
**Standard, View, LE (only for VIB-XPERT, VIBSCANNER, Signalmaster)
Registration
22
OM
NITREN
D - G
etting started 06.06
From these data, OMNITREND calculates an identification numberthat is displayed in the 'ID No.' field. This number is used to generatethe registration password.
Do not change these data under any circumstances after registrati-on. Otherwise, the ID number will also be changed and theregistration will be deleted when you start the program. OMNI-TREND then has to be registered once more (New password, newcertificate, ...). In this case a handling fee will be charged (77EURO)!
So, be careful, when entering the customer data and the softwarenumber. If there is an error in the text, it will be an error that willbe printed on every report page.
Data inputs are case-sensitive!Example: In the next screen the company name is the same asbefore except that ‘Pruftechnik’ is written in capital letters ‘PRUF-TECHNIK’. As a result, the ID number has changed:
Attention!
ID number has changed(see previous page)
The company name is thesame except that PRUFTECH-NIK is written in capital letters.
5.
Registration
5. Print out the return fax using <Print>.
23
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6Registration
6.
Fax: +49(0)89 99 61 63 00
6. Send the Return Fax to PRÜFTECHNIK
You will receive the password required for registration within 24hours (workdays) via fax. The original registration certificate will besend by mail.
Reference numbers of the registration certificates:
VIB 5.480-OMT: OMNITREND for VIBSCANNER StandardVIB 8.956-OMT: OMNITREND for VIBSCANNER ViewVIB 8.957-OMT: OMNITREND for Signalmaster StandardVIB 8.958-OMT: OMNITREND for Signalmaster LEVIB 5.690: OMNITREND for VIBROCORD AVIB 5.692: OMNITREND for VIBROCORD CVIB 5.694: OMNITREND for VIBROCORD ViewVIB 8.862-P: OMNITREND for VIBROTIPVIB 8.960-OMT: OMNITREND for VIBROSPECTFFT (SYSTEM 2)VIB 8.980-OMT: OMNITREND for VIBROWEBVIB 8.981-OMT: OMNITREND for VIBXPERTVIB 7.780-OMT: OMNITREND für VIBROWEB XP
max.24h
Fax PASSWORD
CertificateFax
VIB x.xxx
24
OM
NITREN
D - G
etting started 06.06
7. Upon receiving the registration password open the registrationwindow (see 1. & 2.) and click on <Register full version>:
8. Enter the password (8 upper case letters) and click on <OK>.If the password is correct, the full version is registered.
9. Exit OMNITREND and start the program again in order for theregistration to become effective.
Two or more databasesThe registration is database-dependent, i.e. if you change toanother database, you may have to register the full version againunder certain circumstances.
Software updatesSoftware updates do not affect the registration!
Registration
�Note
8.
7.
25
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6Registration
The ‘PC licence’ registration certificate includes the password thatenables the communication with OMNITREND for the respectivedevice. The PC licence is delivered with the device.
The device types 'VIBROSPECT FFT (device)' and 'VIBROSPECTRAM File' do not have a ‘PC licence’ registration.
Enabling communication with a data collector (offline device)After registering the full version for the purchased OMNITRENDversion (= device type), you can now register your actual datacollector in OMNITREND. This also activates the device for communi-cation with OMNITREND.
VIBXPERT PC Licence
Registration CertificateVIB 8.981-P
Serial No. 0123456789ID No. 12345678
Password ABCDEFGH
FESC
MENUHELP
OMNITREND
VIBSCANNER PC Licence
Registration CertificateVIB 5.480-P
Serial No. 0123456789ID No. 12345678
Password ABCDEFGH
VIBROTIP PC Licence
Registration CertificateVIB 8.862-P
Serial No. 0123456789
Password ABCDEFGH
�Note
26
OM
NITREN
D - G
etting started 06.06
To register the individual device, proceed as follows:
1. Click on <Options> / <Registration/Configuration> :
2. Click on the ‘Measurement device’ property sheet.
3. Enter the ID number of the device in the 'ID' field.You can directly read in the ID / serial number of your device.- To do this, connect the device to the PC.- Switch on the device.- Click on <Get ID>.- Enter the communication port and click on <OK>.
4. Click on <Register device>.
5. Enter the password and click on <OK>.
Registration
5.
1.
2.
3.
4.
27
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6Registration
Enabling communication with an Online systemThe activation of communication with an online system is differentfrom the activation of a measurement data collector. Therefore,follow the instructions given below if you want to activate one of theonline systems listed below in OMNITREND:
VIBROWEB XP, VIBROWEB, VIBRONET Signalmaster, VIBNODE,WinTControl
1. Ensure that the online system is correctly connected in the networkand is switched on. If you want to contact the online system bymodem, set up the remote data transfer connection first.
2. Click on <Options> / <Registration/Configuration> :
3. Click on the ‘Measurement device’ property sheet and then click on<Get ID>.
4. Enter the IP address and, if necessary, the subnet mask as well asthe gateway of the online system. Then click on <OK>:
2.
3.
4.
28
OM
NITREN
D - G
etting started 06.06
5. Enter the name of the Online system. This is the same as the stationdirectory that was created during the installation (default:‘station_name’). Click on <OK>.
6. The ID number of the Online system is transfered and appears inthe ‘ID’ field. Click on <Register device> and enter the password:
7. Finally click on <OK>.
Registration
5.
6.
7.
29
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6Registration
Registering optional software modulesOMNITREND can be upgraded with the following software modules:
• Gear editor (VIB 8.961)
• Signalanalysis for VIBSCANNER (VIB 8.962)Upgrades OMNITREND for VIBSCANNER by the:- Import of time signals (MultiMode/ Route) and Orbit measurements (Multimode)- Import of recording measurements (MultiMode)- Import of balancing data- Gear editor
• ORACLE / SQL database (VIB 8.963 / VIB 8.964)
When ordering, enter the 10-digit serial number of the OMNI-TREND CD and the OMNITREND ID number (see section 'Regist-rering the full version ').
1. Click on <Options> / <Registration/Configuration> :
2. Click on the ‘Add. features’ tab and select the function to beregistered (e.g. Gear frequency editor). Click on <Register>.
3. Enter the password, and click on <OK>.
�Note
3.
2.
1.
30
OM
NITREN
D - G
etting started 06.06
Update & Uninstall
If the OMNITREND PC software has already been installed on yourPC, the so-called 'Update Patch' only needs to be started to update theprogram.
This file is supplied on the current CD ROM (see next page), or it canbe downloaded from the PRÜFTECHNIK homepage on the Internet:
http://www.pruftechnik.com/cm/downloads/sw_all_products.htm
-
Update
Update patch on thePRUFTECHNIK homepage
To update an existing OMNITREND version, install the ‘UpdatePatch’as follows:
From the PRÜFTECHNIK homepage:
• Enter the Internet address in your browser (see above).
• Select your language version from the pull down menu in the'OMNITREND' field and save the 'UpdatePatch' (*.exe file) on yourPC.
• Double-click the file to start the UpdatePatch.
Download site
31
OM
NIT
REN
D -
Get
ting
star
ted
06.0
6Deinstallation
Uninstalling OMNITREND
• Open the Windows START menu and select <Settings> / <Sys-tem control>.
• Open the 'Software' module.
• Select 'OMNITREND' and click on <Add/ Remove>.
From the PRÜFTECHNIK CD-ROM:• Insert the CD into the CD drive and wait for the starting screen to
appear (s. page 10).
• Click on 'OMNITREND' and then on 'Start Intstallation/ Update'.
• Select 'OMNITREND PC software (Update)' and click on <Next>.
• In the following screen, click on <Install> to continue....
• Select 'Modify' and click on <Next>. The installation begins...
• Restart the PC after installation.
• Start OMNITREND to convert the existing database. Log intoOMNITREND under a user name with administrator rights to carryout the conversion.
PRÜFTECHNIKCondition MonitoringP.O. box 12 63D-85730 Ismaningwww.pruftechnik.comTel. (089) 99 61 6-0Fax (089) 99 61 6-300eMail: [email protected]
Productivemaintenancetechnology
Printed in Germany VIB 9.631.06.06.0GOMNITREND® is a registered trademark of PRÜFTECHNIKAG. Contents subject ot change without further notice,particularly in the interest of further technicaldevelopement. Reproduction, in any form whatever, onlyupon express written consent of PRÜFTECHNIK AG.
© Copyright 2004 by PRÜFTECHNIK AG
