Omnitron Systems PoE Media Converters and SwitchesComparison Guide for OmniConverterTM and Industrial RuggedNetTM PoE Products
Omnitron multi-port media converters and switches with Power-over-Ethernet (PoE) enable distance extension over fiber to PoE Powered Devices (PDs). Classified as Power Sourcing Equipment (PSE), OmniConverter PoE products provide power to up to eight PoE PDs using standard UTP cables that carry the Ethernet data.
Key Features ■ Power over Ethernet injector/source ■ Supports PoE, PoE+ and 60W HPoE ■ Multiple port configurations available ■ Supports fixed-fiber connectors or SFP transceivers ■ AC or DC power options ■ Temperature hardened for outdoor deployments ■ Free 24/7/365 technical support
■ Made in the USA
Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to cascade multiple PoE media converters or switches in a daisy chain, or it may be used as another switch port.
OmniConverter PoE Media Converters ■ 1 or 2 SFP Fiber Ports, or 1 Fixed Fiber Port ■ 1 or 2 RJ-45 Ports ■ Supports PoE (15.4W), PoE+ (30W) and HPoE (60W)
OmniConverter and Industrial RuggedNet PoE Switches ■ 1 or 2 SFP Fiber Ports or Fixed Fiber Ports ■ 4 or 8 RJ-45 Ports ■ Supports PoE (15.4W) and PoE+ (30W) ■ Unmanaged and managed models with Web, Telnet and
serial interfaces
RuggedNet Industrial PoE SwitchesRuggedNet Industrial PoE Switches are multi-port ruggedized and temperature-hardened Ethernet switches that support 1000BASE-X fiber, and multiple 10/100/1000BASE-T RJ-45 copper ports with Power-over-Ethernet (PoE and PoE+).
RuggedNet compact fiber switches function as PoE injectors to enable network distance extension with fiber optic cabling and provide power for up to eight Powered Devices (PDs).
The RuggedNet GPoE+/Mi can be managed via a Web interface, Telnet or Serial Console interface. IP-based web management can be accessed through any of the RJ-45 or fiber ports.
The RuggedNet GPoE+/Si is an unmanaged switch with advanced features that can be configured with DIP-switches.
■ Supports PoE and PoE+ ■ 1 or 2 fiber port, and 4 or 8 RJ-45 port models ■ Single or Dual DC power options ■ Unmanaged GPoE+/Si and managed GPoE+/Mi models
with Web, Telnet and serial interfaces
Page 1
OmniConverter /S and /SL models feature one or two RJ-45 ports, one or two fiber ports, and provide advanced features that can be configured with DIP-switches.
FPoE/S and FPoE+/S are Fast Ethernet media converters that provide PoE or PoE+.
FPoE/SL are cost-effective Fast Ethernet media converters that provide PoE.GPoE/S, GPoE+/S and GHPoE/S are Gigabit media converters that provide PoE, PoE+ or 60W PoE.
OmniConverter /SE models support one or two RJ-45 ports, and one fiber port. The /SE models provide a low-cost alternative for applications that do not require advanced features or two fiber ports. There are no DIP-switches for simple, plug-and-play installation. FPoE/SE and FPoE+/SE are cost-effective Fast Ethernet media that provide PoE or PoE+.GPoE/SE and GPoE+/SE are cost-effective Gigabit Ethernet media converters that provide PoE or PoE+.
OmniConverter multi-port media converter models support IEEE 802.3af PoE (15.4W), IEEE 802.3at PoE+ (30W) and HPoE (60W).
OmniConverter media converters are available with DC power via terminal connectors or external 100 to 240V AC power adapters. They can be installed on any flat surface with integrated wall-mount brackets, or DIN-rail mounted using an optional DIN-rail mounting kit.
■ Supports PoE, PoE+ and 60W HPoE
■ Supports 1 or 2 fiber ports, and 1 or 2 RJ-45 ports
■ Supports fixed-fiber connectors or SFP transceivers
■ AC or DC power options
■ Temperature hardened for outdoor deployments
■ Integrated wall mount brackets
Up to three OmniConverter media converters can be mounted on a 1U 19” rack-mount shelf.
SFPs not included
OmniConverter PoE Media Converters
OmniConverter PoE SwitchesOmniConverter PoE Switches support 1000BASE-X fiber, and multiple 10/100/1000BASE-T RJ-45 copper ports with Power-over-Ethernet (PoE and PoE+).
OmniConverter compact PoE fiber switches function as PoE injectors to enable network distance extension with fiber optic cabling and provide power for up to eight Powered Devices (PDs).
The OmniConverter GPoE+/M can be managed via a Web interface, Telnet or Serial Console interface. IP-based web management can be accessed through any of the RJ-45 or fiber ports.
The OmniConverter GPoE+/Sx is an unmanaged switch with advanced switch features that can be configured with DIP-switches.
■ Supports PoE and PoE+
■ Supports 1 or 2 fiber ports, and 4 or 8 RJ-45 ports
■ AC powered
■ Integrated wall mount brackets
■ Unmanaged GPoE+/Sx and managed GPoE+/M models with Web, Telnet and serial interfaces
Page 2
Page 3
OmniConverter PoE Media Converter ComparisonFiber
Data Rate Fast Ethernet Gigabit Ethernet
PoE PoE 15.4W PoE+ 34.2W PoE 15.4W PoE+ 34.2W HPoE 60W
Product Line FPoE/S FPoE/SL FPoE/SE FPoE+/S FPoE+/SE GPoE/S GPoE/SE GPoE+/S GPoE+/SE GHPoE/SModel # Range 9300 - 9319 9340 - 9359 9360 - 9379 9320 - 9339 9380 - 9399 9400 - 9419 9460 - 9479 9420 - 9439 9480 - 9499 9500 - 9519
Low Cost
Ports and Data RatesMaximum
Ports 4 4 3 4 3 4 3 4 3 4
Maximum Fiber Ports1 2 2 1 2 1 2 1 2 1 2
Maximum RJ-45 Ports 2 2 2 2 2 2 2 2 2 2
RJ-45 Data Rates 10/100 10/100 10/100/1000 10/100 10/100/1000 10/100/1000 10/100/1000 10/100/1000 10/100/1000 10/100/1000
Fiber Data Rates 100 100 100 100 100 100 or 1000 1000 100 or 1000 1000 100 or 1000
Features
Frame size 10K 2K 10K 10K 10K 10K 10K 10K 10K 10K
PSE Mode Alt A / Alt B Alt A / Alt B Alt B Alt A / Alt B Alt B Alt A / Alt B Alt B Alt A / Alt B Alt B Alt A / Alt B
Auto Polarity X-over2
Link Fault Modes3
Fiber LoS reset PoE4
External Power Source
DC Terminal 3- Pin 2- Pin 2-Pin 3- Pin 2-Pin and 3- Pin 3- Pin 2-Pin and
3- Pin 3- Pin 2-Pin and 3- Pin 3- Pin
AC Barrel Connector
Operational Temperature RangeCommercial0 to 50°C
Wide -40 to 60°C
Extended -40 to 75°C
Form Factor
W” x L” x H’ 4.5” x 6” x 1” 4.5” x 6” x 1” 3.8”x 4.8”x 1” 4.5” x 6” x 1” 3.8”x 4.8”x 1” 4.5” x 6” x 1” 3.8”x 4.8”x 1” 4.5” x 6” x 1” 3.8”x 4.8”x 1” 4.5” x 6” x 1”
1 Models with two fiber ports support redundant fiber uplinks and daisy chains. 2 Auto Polarity X-over provides PoE power to legacy Cisco (Non-IEEE Standard) devices.3 User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting4 PoE power reset enables a PD device to be re-started remotely with software or by disabling a fiber port
Product Family OmniConverter RuggedNet
Product Line GPoE+/Sx 4 Port
GPoE+/Sx 8 Port
GPoE+/M 4 and 8 Port
GPoE+/Si 4 and 8 Port
GPoE+/Mi 4 and 8 Port
Model # Range 9440 - 9459 9440 - 9459 9520 - 9539 9560 - 9579 9540 - 9559
ManagementManaged with Web, Telnet
and Serial interfaces
Features
PSE Mode Alternative B Alternative A Alternative A Alternative A Alternative A
Fiber Loss of Signal PoE Reset
MUX Mode
Directed Switch Mode
Dual Device Mode
Alarm Contact Closures
External Power Source
DC Terminal 3- Pin 2- Pin* 2- Pin*
AC Barrel Connector
Temperature Hardened
Industrial -40 to 75°C
Form Factor
W” x L” x H’ 5” x 6” x 1.375” 6.28” x 5.14” x 1.5” 6.28” x 5.14” x 1.5” 1.5” x 5.5” x 5.14” 1.5” x 5.5” x 5.14”
OmniConverter and RuggedNet PoE Switch Comparison
All OmniConverter and Industrial RuggedNet PoE Switches share the following features:
■ Supports IEEE 802.3af PoE (15.4W) and IEEE 802.3at PoE+ (30W)
■ One or two fiber ports (fixed fiber or SFP)
■ Gigabit fiber port data rate
■ Four or eight RJ-45 ports
■ 10/100/1000 RJ-45 port data rates
■ 10,240 bytes jumbo frame size
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [email protected] • 38 Tesla, Irvine, CA 92618
©2017 Omnitron Systems Technology, Inc. RuggedNet and OmniConverter are trademarks of Omnitron Systems Technology, Inc. Other trademarks are owned by their respective companies. Specifications subject to change without notice. All rights reserved. 091-19XXX-001D 9/17
* Available with single or dual 2-pin isolated power inputs.
OmniConverter PoE Switches can be wall mounted with integrated brackets or DIN-rail mounted using an optional mounting clip.
RuggedNet Industrial PoE Switches can be DIN-rai l mounted using the included mounting clip.
Page 4