AUXILIARY PRODUCTS ON SITE MACHINING SERVICES & REPAIRS
Member of the Metalock Engineering Group
ON SITE MACHINING SERVICES & REPAIRS
www.mshsmetalock.com
MSHS METALOCK ENGINEERING USASM
MME provides drilling services for the removal of broken cylinder head studs. Refurbishing of damaged thread holes, metric
and/or English threads with custom inserts and/or plugs, will ensure that proper tightening of the cylinder heads is done
according to OEM specifications.
Any make and type of diesel engine
24/7 and emergency repairs
Marine and Stationary Power
DRILLING
Plane surfaces, i.e. large crane foundations up to 24 meters in diameter, are mechanically machined on site with mobile
turning devices. All tolerances given by engine and other equipment manufacturers are fully restored during the on site
machining process.
CRANK SHAFT JOURNAL REPAIR
FLANGE FACING
MME refurbishes severely damaged crankshaft journals with outside diameters from 170mm up to 1020mm with quick
turn-around times. This automatically means a tremendous saving in costs regarding the operational downtime of the engine
since dismantling and heavy transport of the damaged equipment is not necessary. Together with the class-approved annealing
process, the success rate of crankshaft journal repair is 100%.
www.mshsmetalock.com
INSERTS
MME refurbishes cylinder liner landing and sealing surfaces by machining the engine entablature and inserting custom-made
ON SITE MACHINING SERVICES AND REPAIRS
MME refurbishes damaged threads
rings to establish a new sealing and or landing surfaces again
ASSESSMENT
CRANKSHAFT JOURNAL MACHINING
MILLING
LINE BORING
Using our custom-made, transportable line boring tools, and the necessary state-of-the-art laser alignment devices,
MME can restore multiple kinds of damaged bores that need to be in line by 0.01mm on 2- and 4-stroke diesel
engines, gas/water turbine housings, stern tube, rudder stock, AZI pod and crane jibs.
MME provides on site machining, mechanical turning, grinding, restoration and processing of equipment through mobile milling units. Customized On Site tools - Adapted to all engine makes and/or machines
MME mobile machining tools minimize engine and or other large equipment down time
Broadly experienced on Site machine specialists
www.mshsmetalock.com
All MME welding procedures currently established for machine repairs can be carried out in our workshop or on location.
ON SITE HEAT TREATMENTS
MME performs a wide variety of form and size heat treatments. In situ heat treatments can be implemented in stationary
furnaces or directly at the customer’s location using our mobile annealing equipment.
DOCUMENTS - CERTIFICATES
Certified welders (DIN EN 287-1)
Manufacturer’s Welding Qualification Class E (DIN 18800-7, DIN 15018, DIN 19704)
Order-specific welding procedure qualifications/completions
SPECIALIZED WELDING
WELDING TECHNIQUES
E-Hand, MAG, MIG, WIG
Submerged Arc Welding - Flame Cutting (Oxyacetylene and Plasma) - Annealing Techniques - Thermal Spraying
ON SITE MACHINING SERVICES AND REPAIRS
CRANKSHAFT TESTING
LINE BORINGLASER ALIGNMENT
MSHS Metalock Engineering USASM (MME) provides qualified mechanical installation and maintenance, on site 24/7 emergency service repair, and thermal spraying for Marine and Stationary
Power, Oil, Mining, Water Power and Gas Turbine, Process and Manufacturing industries.
Phone: 954-713-0460Skype: metalockengineering
24 /7 EMERGENCY RESPONSE WORLDWIDECALL 954-713-0460
www.mshsmetalock.com [email protected]
CRANKSHAFT JOURNAL REPAIRS INSERTS DRILLING MILLING LINE BORING FLANGE FACING SPECIALIZED WELDING
3190 S.W. 4th Avenue Fort Lauderdale, FL 33315